The address bits 19:0 of TSEG_LIMIT read as zero, but are ignored on
comparison. The result is that the limit is effectively FFFFFh.
Add one MiB to the register value to make TSEG 8MiB instead of 7MiB.
Fixes a crash related to SMRR not matching the TSEG region.
Change-Id: I1a625f7bb53a3e90d3cbc0ce16021892861367d8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
RISCV parts can be created with any one of four CPU modes enabled,
with or without PMP, and with either 32 or 64 bit XLEN.
In anticipation of parts to come, create the Kconfig variables for these
architecture attributes.
Change-Id: I32ee51b2a469c7684a2f1b477bdac040e972e253
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30348
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to EDS #565870 chapter 5.3.1, AG3E bit in PMC located in PMC
memory mapped register but not pci config spaces. Change the programming
to affect that difference.
BUG=b:122425492
TEST=Change System Power State after failure to "s5 off", and boot up
onto sarien platform, check the register with iotools mmio_read32
0xfe001020 and bit 0 is set.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I0934894558fd9cbc056dea8e7ac30426c2529e4e
Reviewed-on: https://review.coreboot.org/c/30945
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FT4 has a strange property where whenever the debounce registers for any
one gpio are changed, the FT4 disables interrupt propagation for ALL
gpio irqs for ~4ms.
In other words, if an edge interrupt of one gpio happens exactly during
this debounce-irq-off window immediately following the configuration of
another gpio, the interrupt will be lost.
It is quite difficult to deal with this in the kernel, since during kernel
boot time, drivers & devices are probed asynchronously, meaning it may
happen that an already loaded driver may miss an interrupt when some
later driver is being probed and configuring its gpio interrupt.
To eliminate this possibility, we pre-configure the debounce registers in
ram stage for all gpios that will be used as irqs later by the kernel
using the same configuration as used by the kernel, as per this table:
IRQ Debounce
Edge Remove Glitch
Level High Preserve Low Glitch
Level Low Preserve High Glitch
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
BUG=b:113880780
BRANCH=none
TEST=Reboot stress test grunt (>100 times); no messages in dmesg like:
tpm tpm0: Timeout waiting for TPM ready
Change-Id: I94c7ecfb14e5bb209b3598e10287c80eb19da25b
Reviewed-on: https://review.coreboot.org/c/30921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
conf pointer could be null, access it only if its not null.
Foundby=klocwork
BUG=N/A
TEST=N/A
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0611e15d52edd8e69e4234b8ac602f35efba4015
Reviewed-on: https://review.coreboot.org/c/30862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
conf pointer could be null, access it only if its not null.
Foundby=klocwork
BUG=N/A
TEST=N/A
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I1b3d6f53d2bfd9845ad7def91c4e6ca92651d216
Reviewed-on: https://review.coreboot.org/c/30860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Add processor power limits control support to configure values.
BRANCH=None
BUG=b:122343940
TEST=Built and tested on Arcada system
Change-Id: I5990dc05b51481a0074855914cef20cf07378cde
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/30907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a new Kconfig NO_BOOTBLOCK_CONSOLE to disable the BOOTBLOCK_CONSOLE
option completely. The commit message of fbb11cf (ARM: Separate the
early console (romstage) from the bootblock console.) states that it
doesn't work before romstage on Exynos 5420.
Change-Id: I9b56a52f2555b5233300f27031a9ef50e7ab7cea
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Default to FSP binary and headers shiped in 3rdparty/fsp.
* Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de
* Select HAVE_FSP_BIN to build test the platform
* Fetch FSP repo as submodule
* Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0
* Introduce FSP_SRC_PATH for FSP source file
* Add sane defaults for FSP_FILE
Tested on wedge100s.
Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
This change provides an interface for canonlake to set TCC.
With this change, we can add code to update Tcc in devicetree.
BUG=b:122636962
TEST=Match the result from TAT UI
Change-Id: Ib54a118e4e409919e3e60112e4621a109404b16d
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/30803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Invert the default instead of selecting it everywhere. Restores the
ability to use its Kconfig prompt.
Beside Qemu targets, the only platforms that didn't select it seem
to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The
latter two were about to be patched anyway.
Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30891
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide options to disable xHCI Link Compliance Mode. Default is FALSE
to not disable Compliance Mode. Set TRUE to disable Compliance Mode.
BRANCH=octopus
BUG=b:115699781
TEST=Verified booting to kernel.
Change-Id: I2a486bc4c1a8578cfd7ac3d17103e889eaa25fe4
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30816
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move early_mainboard_romstage_entry before console_init.
Allows to setup a SuperIO, if any, for serial console.
Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
TCO2_STS_SECOND_TO was renamed to TCO_STS_SECOND_TO but one use
slipped through.
Change-Id: I9e3b1cc5cb2f319db35416edf6cea612d755d40a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30805
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It was relying on bad weak implementation for postcar
and verstage.
Change-Id: I5a520e0166198c0565349c164f143f4a43649861
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Guckian
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com>
The option to specify a binary file name was added later for platforms
that do not provide microcode updates in our blobs repository. Alas,
it wasn't visible what platforms these are. And if you specified a file
for a platform that already had one, they were all included together.
Make it visible which platforms don't provide binaries with the new con-
figs MICROCODE_BLOB_NOT_IN_BLOB_REPO, MICROCODE_BLOB_NOT_HOOKED_UP and
MICROCODE_BLOB_UNDISCLOSED. Based on that we can decide if we want to
include binaries by default or explicitly show that no files are inclu-
ded (default to CPU_MICROCODE_CBFS_NONE).
Also split CPU_MICROCODE_CBFS_GENERATE into the more explicit
CPU_MICROCODE_CBFS_DEFAULT_BINS and CPU_MICROCODE_CBFS_EXTERNAL_BINS.
And clean up the visibility of options: Don't show CBFS related options
on platforms that don't support it and don't show external file options
if the platform uses special rules for multiple files (CPU_MICROCODE_
MULTIPLE_FILES).
Change-Id: Ib403402e240d3531640a62ce93b7a93b4ef6ca5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29934
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Everything is wrong here, the Kconfig symbols are only the tip of the
iceberg. Based on Kconfig prompts the SoC code performed pad configu-
rations! I don't see why the person who configures coreboot should have
the board schematics at hand.
As a mitigation, we remove the prompts for UART_DEBUG, which is renamed
to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say
what it's about), and for UART_FOR_CONSOLE in case the former is selec-
ted.
Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch provides an option to enable or disable IPU (image processing unit),
* Add an entry for SA IPU in the pci_devs.h.
* Enable/Disable the IPU based on devicetree entry.
Change-Id: Ia155bc242dd33e816d056bbea1e3d4c1cbbe23da
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/30698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Expose the FSP tunables for the chipset minimum assertion width
settings which can be configured per-board.
The defaults appear to be different from what is listed in the FSP
header documentation so I tried to list what the actual default is
based on the source rather than what is stated the header comments.
Change-Id: Ie0606c2984727adf13c9fb8395586287162e49ca
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Add logging of chipset events on boot into the flash event log.
This was tested on a google/sarien board to ensure that events
like "System Reset" are added to the log as expected.
Change-Id: I38498cef36d8cc9c8a1f63d12618ea768b65254c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
This structure is declared as a static CAR_GLOBAL in the common
PMC library code and in the SOC specific code. Remove the SOC
specific version and instead get the chipset_power_state pointer
from the PMC library.
This fixes events that were recorded in chipset_power_state at
boot but were reading as all zero when it was time to parse the
structure when logging events to flash.
Change-Id: I67a4f724c0707d98766ad28abd8d0b66a5615745
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Link walkfcbfs.S in the C_ENVIRONMENT_BOOTBLOCK case and also in the
romstage.
This is useful for cbfs access in pre-CAR environments.
Change-Id: I9a17cdf01c7cbc3c9ac45ed1f075731f3e32f64b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Pass timestamps and BIST to romstage using the same signature
as C_ENVIRONMENT_BOOTBLOCK will.
Change-Id: Ic90da6b1b5ac3b56c69b593ba447ed8e05c8a4e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Have same usage of registers with romcc bootblock
and C_ENVIRONMENT_BOOTBLOCK.
Change-Id: Ibfa80e40f0b736a904abf4245fc23efc0cdc458d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch fixes icelake build brokenness due to bootblock size
issue.
Increase the bootblock size to 48K to match skylake. With UART
enabled we are very near the 32K limit, and with upcoming changes
to add USB devices in devicetree for a icelake board it is over
the current 32K limit.
BUG=b:122485106
TEST=Able to build dragonegg
Change-Id: I66706e66ac1bce677fe11022d0eef44b9efc2e76
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/30702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
The newest and most useful incarnation was hiding in soc/intel/common/.
We move it into the Mainboard menu and extend it with various flags to
be selected to control the default and which options are visible. Also
add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the
boolean to int conversion into Kconfig:
0 - S5
1 - S0
2 - previous state
This patch focuses on the Kconfig code. The C code could be unified as
well, e.g. starting with a common enum and safe wrapper around the
get_option() call.
TEST=Did what-jenkins-does with and without this commit and compared
binaries. Nothing changed for the default configurations.
Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently this needlessly initializes the hardware in the both the
romstage and the bootblock, but it works.
Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the
use better, related support files can be built to pre-ram stages
regardless of usbdebug being enabled or not.
Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK).
Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Expose the function that can unconditionally re-initialise
EHCI debug host and gadget.
Given the missing header in soc/intel files that prevented
building with USBDEBUG_IN_ROMSTAGE=y, it is not actually
known if those SOCs work at all for usbdebug.
Change-Id: I8ae7e144a89a8f7e5f9d307ba4e73d4f96401a79
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add possibility to update microcode from BLOBs repo.
No need to copy headers around which have an unclear license.
Tested on wedge100s:
* Microcodes are included into FIT.
* Still boots to Linux.
* 3rdparty/blobs at dd00ad1260ef1dc0ba8c55c06ab10c7639dc3eb1
Change-Id: I8ecfb7302a7fc847a51934942f6d323a4f96abba
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Write a range of memory with special pattern, and read it back to check
whether the read value same as write.
The test pattern include 8bit offset read write, 16 bit offset read
write, 32bit offset read write, and cross testing.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I30d5fbd3db2acf36e3058ba4f34558b981fba78c
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28845
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: Id1e8862ff6feb9628d37fe5300780ff56865a563
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Follow instrcution from https://doc.coreboot.org/acpi/gpio.html to
implement GPIO toggling method, covered for both CNP_LP and CNP_H pch.
BUG=N/A
TEST=Build and boot up fine on sarien platform, add an dummy STSX in
DSDT table, read back from iotools to confirm the GPIO tx state get
updated.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I006a6a8fc580c73ac0938968397a628a4ffe504f
Reviewed-on: https://review.coreboot.org/c/30461
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
