On IBM/SBP1 with 384 cores it takes a while for all APs
to check in. Use linear scaling instead of hardcoding an
arbitrary limit for the timeout.
Change-Id: If020a3fa985bfc7fd2f0aa836dc04e6647a1a450
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: TangYiwei
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Set DmiMaxLinkSpeed to 4 in FSP to ensure that FSP always supports
PCIe Gen 4 drives.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0e31919122dacfbdc2486fa8216a28b479f3bd00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
There are two versions for lastbus:
Version 1 for MT8186, and version 2 for MT8188.
BUG=b:263753374
TEST=build pass.
Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
For simplicity, OEM devices are given a single codename per build variant. Winterhold was intended to be the lead device and was chosen as the code name for this OEM. Unfortunately, Winterhold was cancelled. We attempted to rename Winterhold to Whiterun to avoid future confusion. Again, unfortunately, since some devices were already built, changing the name requires a manual change to force the firmware to be taken by the DUT. This was not a reasonable path forward, so we're abandoning the naming to Whiterun.
This reverts commit af69de494e.
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idef95f0f4f369b235937e1806ce57c427e441f21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73583
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The get_threads_per_core function isn't specific to the non-CAR CPUs and
also applies for Stoneyridge and even for family 16h model 30h outside
of soc/amd, so move it from the non-CAR-specific cpu.c file to the
common AMD SoC cpu.c file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I05946f163112ff93f33139f6c43fed5820fd0a3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Add a paragraph to the help text for VGA_BIOS_ID to explain which PCI ID
needs to be used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a0f25481e275b7d190f29f5670cc98443dbe719
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73613
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso already uses the Cxxx ACPI CPU device naming scheme, due to it
being what the AGESA reference code uses. We initially relied on the
AGESA/FSP generated SSDT for the P- and C-state support before we had a
native implementation for this in coreboot. The Cxxx naming scheme can
also be used for the other AMD SoCs except Stoneyridge which is pre-Zen
and doesn't select SOC_AMD_COMMON_BLOCK_NONCAR. The main advantage of
using Cxxx instead of CPxx is that the Cxxx scheme supports systems with
more than 256 CPU threads.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I884f5c0f234b5a3942dacd60847b2f095f9c0704
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73620
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For Intel SPR-SP, the SAD device is hidden, so pcidev_path_on_bus()
returns NULL. Therefore use pci_s_write_config32() instead.
Move lock_pam0123() from finalize.c to util.c, to be together with
unlock_pam_regions().
Change-Id: Ib08d423d8c4d482612077b66dab3878018da8f2b
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Intel SPR-SP has its specific way to get the bus number of ubox.
Move the current implementations to CPX-SP and SKX-SP folders.
Change-Id: I2b69be74d140115f9f78bc991fb690e3c90c88db
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This reverts commit b42ca4d0b2.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: I79da9143cc63459e7e29431eff2cb14200424b37
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit 35354583cd.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: Ie82cbafd4bea2416526e2847738802a05ed45582
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Only call cbfs_boot_map_optionrom/cbfs_boot_map_optionrom_revision once
and pass the already remapped PCI ID to it. This avoids the spurious
warning that the CBFS file wasn't found from the first
cbfs_boot_map_optionrom call in cases where the PCI ID needs to be
remapped to get the right ID for which a file in CBFS exists.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If7da78c69dd702280a78996a5823972516e0319b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73612
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPE number used for XHCI has now been defined in AMD's common code
in CB:67936. Change over existing code to use this new definition.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on nipperkin device and verified that XHCI events string use
GPE 31.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I9c2a44f7d2eb47422ae8c585e5e01ea0b420d461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69917
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPE number used for XHCI has now been defined in AMD's common code
in CB:67936. Change over existing code to use this new definition.
BUG=b:186792595
TEST=Ran on skyrim device and verified XHCI GPE setting.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I3bfc2256ea2ca851afe88f2cdb419f39eee76fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69916
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD SoCs currently only log the GPE# when an XHCI controller wakes the
system. Add code to log XHCI wake events to the elog.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: Ic0489e1df55c4e63cb8a306099e3f31c82eebd58
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
- Remove functions that are only called in one place.
- Add warning if user doesn't supply a platform, since that can lead to
dumps/layouts that do not include all IFD regions without the user
even reliazing it.
- Inform the User if IFD or Flashmap is not found.
- Inform the User if there is not a single match between FMAP and IFD
region
- Avoid printing usage if not specifically asked by the user.
It tends to obfuscate the original error message.
- Keep indentation consistent throughout the file.
- Remove typedefs (coreboot coding style)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I7bbce63ecb2e920530394766f58b5ea6f72852e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Winterhold boards populate either NVMe or eMMC, but not both.
This means that there is always one link that is unpopulated. The PCIe
configuration code takes longer to verify that a link is unpopulated
than to just train the link, so this slows down the boot by roughly
80ms vs the case when the device is present. Not training the device
at all lowers boot time by another 20ms, for a total of 100ms saved.
Looking at the NVMe CLKREQ signal before initializing the ports allows
us to identify which device is populated and only initialize that
device.
BUG=b:271569628
TEST=Boot Whiterun and eMMC or NVMe correctly work, boot time is lower.
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0b87f5e968cd1c87e62a1c0fbdee1fc0723f655d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
These ports are not hot pluggable, so drop the parameter, which
will result it in being set to zero / not enabled.
BUG=none
TEST=build boot skyrim, verify all PCIe devices functional.
BRANCH=skyrim
Change-Id: Iaa55cc765e8f073b31f25771633789ac13e2fffa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Enable both L1.1 and L1.2 substates for the WiFi, SD card reader,
and SSD (both NVMe and eMMC). If a given device does not support
a particular substate, then it will not be enabled during PCIe
enumeration by coreboot.
BUG=b:270690572
TEST=build/boot multiple skyrim/whiterun/frostflow SKUs with different
storage configs, verify WiFi/SD card/SSD all functional and have L1
substates enabled insofar as they are supported by the device.
BRANCH=skyrim
Change-Id: Ib84df8b9d97282ae696414e52c4a65cfb0a81194
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This allows variants to override the skyrim port descriptors.
BUG=None
TEST=Tested with following patches
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8cff44f5b39d130a7191a69970cae8a88bb5d475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This fixes the case where a Broadwell CPU is combined with an AMD or
NVIDIA GPU would result in using the Broadwell GPU VBIOS file from CBFS
for the discrete GPU too. A further improvement would be to use a list
of the Intel iGPU PCI IDs like it is done in the Skylake code.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3eb50cb9a0539255d50e5cd8163f10c3a062cc4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73611
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This patch updates PMC API name from `pmc_send_pci_enum_done` to
`pmc_send_bios_reset_pci_enum_done` to inform PMC IPC about BIOS done
is also set along with PMC enumeration being done.
BUG=b:270942083
TEST=Able to build and boot google/rex.
Change-Id: I1cf8cb1ecadeb68c109be6b0e751a3f2c448ae4f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:272173189
TEST=run part_id_gen to generate SPD id
Change-Id: I141bda6eda3f658ca608c86ad0b320d018598514
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73554
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Decrease Touch i2c delay during power-on sequence from 300 ms to
150 ms to make S0ix resume time meet requirement.
BUG=b:264199989
TEST=Run the following test from chroot.
test_that -b {BOARD_NAME} {device IP} f:.*power_UiResume/control
Check seconds_system_resume value less than 500 msec
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ib81a9c1a90589b8b08e6ce6471db2abef96047ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73532
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the onboard Realtek NIC definition to a child device of
PCIe port 6. This makes sure it is advertised as "onboard", such that
it appears as eno0 on systemd/udev-based systems.
This commit is very similar to
https://review.coreboot.org/c/coreboot/+/73516
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The LOGICAL_CPUS Kconfig option is always true and also not user-
configurable, so it can be dropped.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4866de003058ec0f99495b405e26dfd7ba1fa28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Enable whiterun/winterhold platforms to send the fuse SPL (security
patch level) command to the PSP.
BUG=b:254568112
TEST=On a platform that supports SPL fusing, a message indicating
that fusing was requested will appear in the coreboot console log,
followed by a puff of smoke when the fuse is set and the message
"OK" again on the debug console. (Kidding about the smoke.)
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I45578597234ba672c89ac421b4626088faca27d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72914
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This adds checks for three more error bits before requesting that the
SPL fuses are updated.
- While I'm here, I'm adding the include of types.h which was previously
done through other include files, but should be done independently.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I87a7d40850c4e9ddbb2d1913c1588a919fdb29d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Use the presence of an SPL (Software Patch Level) file to trigger the
function that reads and writes the SPL fuses. The current Kconfig
option will be used to decide to write the fuses. This allows us to
see the state of the SPL update bit which determines whether or not
SPL fusing is allowed and needed before enabling the fusing.
- Refactor a bit to prepare for following changes.
- Update phrasing
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7bd2798b984673a4bd3c72f3cab52f1c9a786c67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Now that the code using the ACPI_SSDT_PSD_INDEPENDENT Kconfig symbol is
moved to soc/amd/common/block/acpi/cpu_power_state.c, also move the
Kconfig symbol to the Kconfig file in this directory.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide18111df38d4e9c81f7d183f49107f382385d85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce the get_cstate_io_base helper function that write_cstate_entry
can call directly to get the C state control IO base address instead of
having get_cstate_info pass this Io address to each write_cstate_entry
call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4cc80ded0a2fbc2dee9ca819e86284d9ffd58685
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The bit position of the P state enable bit in the 8 P state MSRs is
identical for all AMD chips including the family 16h model 30h APU that
lives outside of soc/amd. The other bits in those 8 MSRs are more or
less family- and model-specific.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Touchscreen signals were renamed for Rex schematics dated 21st Dec'22.
This CL fixes the comments for those signals.
BUG=b:263411413
TEST=None required (changed comments only)
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Ic40ef943d199d9f4a2bec9c0e6d4820224ef6adc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The implementations of get_pstate_info of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. The SoC-specific get_pstate_core_freq and
get_pstate_core_power functions remain in the SoC-specific code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe0494f1747f381a75b3dd71a8cc38fdc6dce042
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
With the exception of the generate_cppc_entries call, the
implementations of generate_cpu_entries of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. Since all SoCs that support CPPC already select the
SOC_AMD_COMMON_BLOCK_ACPI_CPPC Kconfig option, this can be used to only
call generate_cppc_entries for platforms where it is available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71323d9d071b6f9d82852479b60dc56c24f2b9ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Split the big PSP FW data into two parts, head and body. The head
needs to be located at original specific location. The body address is
more flexible. So the big body will not cover other needed FWs like
EC.
Give the body a specific named AMDFWBODY, which should be defined in
flashmap.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: Ia8b318f71632a2c9b97ce67486374dc24d23e63e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Instead of hoping that the default the C state control IO address in
binaryPI won't interfere with any other IO space usage in coreboot,
assign the ACPI_CSTATE_CONTROL value to the CStateIoBaseAddress platform
config structure element to make sure that binaryPI will use a known
address for the IO port based C state control. binaryPI will write this
address to the MSR_CSTATE_ADDRESS and will then also use these IO ports
in the _CST packages in the PSTATE SSDT, so changing this won't cause
a mismatch between those two.
The default CStateIoBaseAddress in the FT4 Stoneyridge binaryPI used on
Careena is 0x1770, so this didn't collide with any other IO space
registers, but it's still much better to tell binaryPI which exact IO
addresses to use.
TEST=On Careena MSR_CSTATE_ADDRESS now contains the ACPI_CSTATE_CONTROL
IO base address 0x420 and the PSTATE SSDT has the IO address 0x421 in
the _CST package entry for the second C state which are both the
expected values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I207202802427d4bf00f283bcbd83a174ab0a2846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The Realtek RTL8111E NIC is currently not defined as a child device,
resulting in the on_board flag not being set to 1. This means that
Linux / udev will call the device enp3s0 rather than eno0, as is
appropriate for on-board ethernet devices.
Additionally, the comment in devicetree.cb stating that PCIe port 6
is the ethernet controller is incorrect. It's actually port 4.
This patch moves the comment to the right port, and defines the NIC
as a child device of said port, so that it's properly defined as an
on-board device.
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/TFWNW3Y7IWTFD4KIBVNQYW3DODJ6SSC2/
Change-Id: Ie1e3a757a6bd6c7dd1702ced177d13711978dcc4
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73516
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5157fc031c5b19d8633132222520f582620208c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4f5743dd2e4dfdfeb3ffb2e9b964bdc75c84e6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3669c66094f0137081888ebdd1af838e2ea269b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id97fcb74ff3d48994a3181d9c31cbbeb5a76c60a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id6bd8879ce5968b24893b43041be98db55a4c3c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Instead of using a magic constant in the bit_offset field of the C state
resource for the C1 state that's entered via the MWAIT instruction, use
the existing ACPI_FFIXEDHW_CLASS_MWAIT define. This value is checked by
acpi_processor_ffh_cstate_probe in the Linux kernel.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9edc681efab15b5ceba91c8105f7dc6d687d8be8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce the get_cstate_info helper function that populates the caller-
provided cstate_values array with the data returned by the SoC-specific
get_cstate_config_data function. From the array get_cstate_config_data
returns, only the ctype, latency and power fields are used, so the rest
can be left uninitialized. Those 3 fields are compile-time constants.
For each entry, write_cstate_entry will generate the corresponding
resource information from the given data. In the C1 case where ctype is
1, the state is entered via a MWAIT instruction, while the higher C
states are entered by doing an IO read from a specific IO address. This
IO address is x - 1 bytes into the IO region starting at
MSR_CSTATE_ADDRESS for the Cx state. So for example C2 is entered by
reading from the C state IO base address + 1. This resource information
is generated during runtime, since the contents of MSR_CSTATE_ADDRESS
aren't necessarily known at compile-time.
MAX_CSTATE_COUNT is introduced so that the caller can allocate and pass
a buffer with space for the maximum number of C state entries. This
maximum number corresponds to the number of IO addresses the CPU traps
beginning from MSR_CSTATE_ADDRESS. In practice, it's unlikely that more
than 3 or maybe 4 C states will be available though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c36c1d604ced349c609882b9d9fe84d5f726a8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for lenovo boards: t400, t410, t420, t420s, t430,
t430s, t520, t530, x131e, x1_carbon_gen1, x60, x200, x201, x220, x230. A
0x2000 RW_NVRAM region is allocated for them, with the COREBOOT size
reduced by 0x2000.
Also remove the VBOOT_VBNV_OFFSET config, since it's only used for
VBOOT_VBNV_CMOS.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
BUG=b:235293589
TEST=./util/abuild/abuild -t LENOVO_T430S -a # with VBOOT enabled
Change-Id: I7e29db7eeceec499fbbcf902a26bfe9a2076de40
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
EC_HOST_EVENT_GPU was renamed from
EC_HOST_EVENT_USB_CHARGER and thought to no longer
be used. It was subsequently removed in
I9e3e0e9b45385766343489ae2d8fc43fb0954923
Add back the mask for this event as it is infact
required on certain Brya (Agah) and Hades variants.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
BUG=b:216485035,b:258126464,b:266631157
BRANCH=none
TEST=D-notifier events are received again from EC
Change-Id: I9d7bf52efa9572e1bbd2f307420e09a7398a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73217
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add SODIMM support, drop the solderdown based on schematics.
BUG=b:271199379
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I85ec79c3d8f1147a875c4d04017bb50347121ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Raptor Lake i9 CPUs have 8P+16E cores for a total of 32 threads.
Change-Id: I26a729a585e7dc14f38c9092056eb0280726f053
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73514
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The XHCI code does not currently contain a structure that corresponds
to the XHCI capability registers. These registers contain various
useful information about the controller. Create a`xhci_capability_regs`
struct to address this.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: If38bfde726bd4e5dd314456f25a2b08acd3cd20c
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Instead of having binaryPI generate a PSTATE SSDT that uses \_PR_ as the
scope for the CPU objects and patching this SSDT in coreboot to use the
\_SB_ scope in patch_ssdt_processor_scope, request binaryPI to use the
\_SB_ scope instead by setting the late platform configuration option
ProcessorScopeInSb to true.
TEST=Careena still boots and Linux doesn't show any ACPI errors with
this patch applied. With only patch_ssdt_processor_scope removed, but
the ProcessorScopeInSb option not set, Linux will complain that it can't
resolve the \PR.P00x symbols.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If88820a0f5df923f129e2e3b5335f5f0e38ee7f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This patch updates the print msg of mrc_cache size from hex to
decimal for easier understanding while debugging the issue.
TEST=Able to build and boot google/rex.
Without this patch:
[SPEW ] MRC cache found, size ee75
With this patch:
[SPEW ] MRC cache found, size 61045 bytes
Change-Id: I69feeb36423e47a5992c9f27d9a7042803a492cd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
It is necessary to increase the AVDD/AVEE of TPS65132s PMIC to +-5.7V
for powering on BOE_TV110C9M_LL0. So we set the default value to +-5.7V
and program the value to the EEPROM when configuring the display at the
first time. In this way, TPS65132s could load the correct setting from
the EEPROM after booting into kernel.
BUG=b:268292556
TEST=test firmware display pass and AVDD/AVEE is +-5.7V on Geralt.
Change-Id: I29236818444cac84d42386a371cd8934048ff948
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73443
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Move the sustained_power_limit_mW setting from the baseboard
to variants. This setting will be needed before STT is enabled,
but once STT is enabled, this setting should be removed.
BUG=b:265267957
BRANCH=none
TEST=Build/Boot to ChromeOS
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I7b9779600cfa8c7581732e936a714728fd618d20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I82c2016d9dfb39ff7b372815737d4ae62875340c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73373
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
To support an RPL SKU on taeko, taeko must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for taeko so that it will use the RPL
FSP headers for taeko.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot taeko to kernel.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Cq-Depend: chrome-internal:5544049, chromium:4302529
Change-Id: Ic97400555dabb237325e7c4a8d5edcbb4779cdb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This board is based off b75pro3-m, which is very similar. Compared to
it, it just lacks a COM1 header, and the secondary ASMedia SATA3
controller.
Tested with:
CPUs:
- Core i5-3330
- Core i5-3470
- Core i7-3770
RAM:
- single bank 4GB CL11
- two banks 4+4GB CL9
- two banks 8+8GB CL10
OS:
- Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72)
Working:
- GRUB2 payload with embedded default config for boot from USB, disk
- UEFI EDK2 payload
- Intel ME stripped
- Native raminit
- Integrated graphics with libgfxinit (HDMI, DVI and VGA)
- (boot from) SATA2, SATA3, ports
- Rear USB 2 and 3 ports (supports boot)
- Internal USB 3.0 ports
- Realtek GbE NIC
- 2.0 channel audio via lineout jack output
- ACPI (power button triggers OS event)
Untested:
- Internal USB 2.0 ports
- eSATA port
- 7.1 channel audio
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ia6a6eb3e922920f4afbcb7828cd2b779b9caebcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73097
Reviewed-by: Kevin Keijzer
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The legacy ACPI CPU control registers in IO space where the first 4 IO
locations control the CPU throttling value don't exist any more on the
Zen-based CPUs. Instead this IO address is written to MSR_CSTATE_ADDRESS
in set_cstate_io_addr which will cause accesses from the 8 IO addresses
beginning with ACPI_CSTATE_CONTROL to be trapped in the CPU core. Reads
from those IO addresses will cause the CPU to enter low C states.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c34e201cc0add1026edd7a97c70aa57f057782b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Finally figured out why ACPI_GPE0_BLK only being 4 bytes after
ACPI_CPU_CONTROL won't work and its due to the CPU trapping 8 IO
addresses from ACPI_CPU_CONTROL on for C state control. This is set up
in set_cstate_io_addr by writing the ACPI_CPU_CONTROL value into
MSR_CSTATE_ADDRESS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iedf53bbdae6ca65224601aad5cd1163df4b54131
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso and newer don't implement the P_CNT register to control the CPU
duty cycle and also trap the C state control IO addresses directly in
the CPU, so those won't reach the FCH. This register is unused in the
Picasso code and not even defined any more in the Cezanne PPR. The
Picasso PPR does define this register, but since it's useless and might
even just be a leftover form a pre-Zen CPU generation, drop the define.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3820db542c4714a100c7d36de673daa1a06e4a67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the duty_offset and duty_width FADT field in
acpi_fill_fadt for all SoC except Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib63b24891d44298841153dfc500b030619e1a5ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso neither has the corresponding P_CNT register implemented nor
writes a _PTC ACPI object that would specify the P_CNT register. The
Picasso UEFI reference code also sets the duty_width FADT entry to 0.
This also aligns the Picasso code with the Cezanne code in this regard.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I74645e5c4e54a2ad6bc7f9e72f5f656027a79860
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the pstate_cnt FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If3ddb466de1d437361d811e45e328a1dbff02fcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the mon_alrm FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabb5fc7367f1e4e7acea1a58abdb643fc46ca776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The ASRock B75 Pro3-M port was lacking a cmos.default and cmos.layout,
which means nvramtool could not be used to change any nvram values, and
the defaults were always being used.
I have "borrowed" the files from the similar h77pro4-m port, which
work fine for the b75pro3-m. I can now adjust things like gfx_uma_size
and power_on_after_fail, which are quite useful to be able to modify.
Additionally, this board did not have a data.vbt, so I extracted
vbt.bin from the VGABIOS and added it.
Change-Id: I40822f2f7b013b7ac0658d66d7972b447066d593
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73451
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
On the ASRock B75 Pro3-M, resuming from S3 has always been broken;
see commit 928c6c6336 (mainboard/asrock: add ASRock B75 Pro3-M).
This was because 3VSBSW# was not enabled during S3, causing the
board to reboot instead of resume. This change enables 3VSBSW#
during S3, which leads to S3 resume working normally.
Another issue with this board was that hardware monitoring was not
working. The nct6775 Linux kernel module could not be loaded, due to
the device having a base I/O port of 0. This change also enables the
Super I/O properly, so that sensors-detect can find the sensor and
the kernel module can be used.
Change-Id: I6e504fe4b60da1d7b9830bea5029101bb8cebcb5
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73450
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skyrim does not have a cardbus socket, so disable it.
Maybe cardbus support shouldn't be enabled by default?
BUG=None
TEST="PC Card (PCMCIA) is supported" no longer shows up
in dmidecode output.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic941b075e8b5082b5e61e728a77fd79c0ebba35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Only Frostflow supports the stylus, so remove the gpio-keys ACPI node
from Skyrim.
The Kconfig value DRIVERS_GENERIC_GPIO_KEYS is still enabled for all
Skyrim variants, since coreboot will drop the driver from the BIOS image
if there are no references to it (in the devicetree). If some other
design ends up using the stylus in the future we won't have to bring it
back.
BUG: none
TEST: build_packages --board=skyrim chromeos-bootimage --autosetgov
Change-Id: I9ffe215741b72b678d74405769f35167d8ded4b5
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Add a config "USE_NAU8318" to enable NAU8318 support.
NAU8318 is another speaker used in Geralt. NAU8318 supports beep
function via GPIO control. So we configure the GPIO pins and pass them
to the payload.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add a config "USE_MAX98390" to enable MAX98390 support.
MAX98390 is an I2S smart amplifier used in Geralt. It is also the
default speaker for Geralt reference board.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Enable bus protection for display to avoid bus hang and incomplete bus
transaction.
BUG=b:264204465
TEST=test firmware and kernel display pass for MIPI panel on geralt.
Change-Id: Iac61a69f2b84966dd468442daaa59d83eec775aa
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73411
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Bus protection is a HW mechanism to avoid bus hang and incomplete bus
transactions. Bus protection HW must be enabled while the receiver of
the transaction is not able to respond.
BUG=b:264204465
TEST=build pass
Change-Id: I14aa63c4934073a14552cef64f40657d0197bbe1
Signed-off-by: garmin chang <garmin.chang@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73375
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The XHCI device functions currently use functions that require a
access to the device tree. Create variant of these functions that can
operate with a resource* as an argument and refactor the existing
device*-based functions to operate by calling the resource*-based
variants. This is useful for stages like SMM that may not have access to
the device tree.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on skyrim device, verified that XHCI ACPI tables are still
generated correctly.
Change-Id: If5a74f9529d5dc6031ec968ef5f40a9cad5ffbc4
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
In certain cases data within protected memmory areas like SMRAM could
be leaked or modified if an attacker remaps PCI BARs to point within
that area. Add support to the existing SMM runtime to allow storing
PCI resources in SMRAM and then later retrieving them.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I23fb1e935dd1b89f1cc5c834cc2025f0fe5fda37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
According to thermal_table_0215, adjust DPTC and STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Id7df3f9bfa3f0e1337c502bc7db9e09e12cd956a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73081
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add stt settings for dptc tablet mode.
BUG=b:257149501
BRANCH=None
TEST=Check if the STT value matches the clamshell/tablet mode.
Run the WebGL aquarium with 5000 fish and verify that there is
no power drop peak.
Change-Id: Ib4aad3af8761b20084717b15a462edf4704b83cc
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73205
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
The SPL parameter for DPTC settings is not available for STT-enabled
platforms. It needs to be removed to avoid confusing STT calculations.
BUG=b:265267957
BRANCH=none
TEST=Run the WebGL aquarium with 5000 fish and verify that
there are no power drop peaks.
Change-Id: I8e6dad7d24883f8aadce83ebac401ecd4137d61a
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
On platforms with more than 255 cores the ACPI CPU string
would overflow and generate duplicates. Fix that by changing
the string to hex and use 3 digits.
Test:
Able to boot without ACPI errors on IBM/SBP1 which has
384 actives cores.
Change-Id: I1887928da0c049c27e2ec129f49051b24048b33b
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
oryp10 is nearly identical to the oryp9, with the differences being:
- Uses DDR5 RAM instead of DDR4 RAM
- Uses Realtek ALC1306 instead of TI TAS5825M
- Has an option for OLED display
Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Fixes detection of the on-board RAM (Samsung K4AAG165WA-BCWE) on the
System76 Lemur Pro 11 (lemp11).
Change-Id: Ibe56c0f2b81d660303429cd2e21a7bb6cd433da5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
