DRAM Controller is always 00.0. No need to check its PCI ID.
Change-Id: I9c5f3e5658905e464491579f8da01aa6a03bd3b7
Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org>
Reviewed-on: https://review.coreboot.org/21754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Port the ACPI opregion implementation that resides in
drivers/intel/gma to older platforms.
It allows to include a vbt.bin and allows GNU/Linux to load the
opregion as ASLS is being set.
Windows' Intel will likely ignore it as it relies on legacy VBIOS
to be loaded at 0xc0000.
Tested successfully on DG43GT (x4x) with vbt.bin,
with X200 (gm45) with vendor option rom and
D945GCLF (i945) with fake vbt.
Change-Id: I1896411155592b343e48cbd116e2f70fb0dbfafa
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The scramble seed intended for CH1 were written to the regs of CH0.
Write the scramble seed for CH1 at the correct offset.
TESTED on Lenovo T430, HP 2760P, Asrock B75PRO3-M.
Change-Id: I3778947e96b3298c38e6d5b74988e617e1ffea7b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Iru Cai <mytbk920423@gmail.com>
This code path was only triggered in one corner case: GFX UMA set to
48MiB. It created a hole below UMA to save MTRRs. But, this hole was
never accounted for when calculating cbmem_top(). Instead of trying
to fix it, remove it, it's not worth the trouble.
TEST=Booted lenovo/x200 with all available CMOS gfx_uma_size settings.
Change-Id: I3f4ceec4224d86113be9bfa3ce4759bed584640d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
New AGESA support files will be used for binaryPI
platforms as well. Furthermore, some of those should
move from split nb/ sb/ directories to soc/, so move
support files for the API under drivers/.
Change-Id: I549788091de91f61de8b9adc223d52ffb5732235
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move all boards that have moved away from AGESA_LEGACY_WRAPPER
or BINARYPI_LEGACY_WRAPPER to use POSTCAR_STAGE.
We use POSTCAR_STAGE as a conditional in CAR teardown to tell
our MTRR setup is prepared such that invalidation without
writeback is a valid operation.
Change-Id: I3f4e2170054bdb84c72d2f7c956f8d51a6d7f0ca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This file mostly mimics Porting.h and should be removed.
For now, move it and use it consistently with incorrect form
as #include "cbtypes.h".
Change-Id: Ifaee2694f9f33a4da6e780b03d41bdfab9e2813e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SPD decoding problems are no longer a good method for detecting if i2c
byte read failed, since the return value of i2c_block_read is checked.
Change-Id: I230aa22964c452cf28a9370c927b82c57e39cc62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This simplifies computing dram timings a lot.
This removes computation of rank size based on columns, rows,
banks,... and uses the information in SPD byte 31. The result of this
is that dimms with multiple asymmetric ranks are not supported
anymore. These however are very rare and most likely never tested on
this platform.
This also uses i2c block read instead of byte read to speed up the
raminit. The result is less time is being spend reading SPDs.
It still keeps smbus read byte as a backup if i2c block read were to
fail.
Change-Id: I97c93939d11807752797785dd88c70b43a236ee3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
According to clang, main has no prototype for bcom/winnetp680
so add it into corresponding raminit.h
Change-Id: I8a55267901986757a4fa88ee13460ffbed3eeadc
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
There's no reason to mutate the struct device when determining
the ACPI name for a device. Adjust the function pointer
signature and the respective implementations to use const
struct device.
Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Implement cbmem_top() required for cbmem support in romstage.
Boot tested on asus/p2b-ls. Boards to move to this setup in
followup patches.
Change-Id: I432f145a5343c1bb5f2b0de3b6b88f57124d1bd9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/20977
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
With AMD_INIT_ENV and AMD_INIT_S3LATERESTORE moved
from romstage to ramstage, heapamanager in romstage
is no longer needed.
Change-Id: Iea8ad3ddb245c83dd290436ac9d4ecac9350b88c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Vendorcode expects some DRAM controller registers to
be writable, but they are actually locked after soft
resets if C6 states are enabled.
Without the workaround, raminit fails on soft resets.
Change-Id: I6b9e275e11b2907d026c13341334983a4d9c8889
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This recovers FCH configuration on S3 resume path.
Appearst to work, but other defects of HAVE_ACPI_RESUME
must be fixed also before S3 support is re-enabled.
Change-Id: I8d07d2e9dc161b67d854fcc8ec1da1f36900f989
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Inspired by gm45 code, which sets this value the same way.
Some values for tRD on 800 and 1067MHz FSB were set wrong because the
CAS/Freq selection was wrong. CAS was often selected to low and when
fixing CAS this results in tRD being too high, due to an incorrect
lookup table which caused instability.
PASSED memtest86+ during 10h+ on 1067MHZ fsb with 667MHz ddr2, CAS 5
on GA-945GCM-S2L.
Change-Id: I8002daf25b7603131b78b01075f43fd23747dd94
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We set the SPI lockdown in BS_POST_DEVICE (dev_finalize()) on many plat-
forms now. The SPI controller is initialized at start of BS_DEV_INIT
(dev_initialize()).
The SPI lockdown usually shouldn't be a problem but the SPI driver imple-
mentation lacks full support for the locked interface. Also, some options
exist to lock all flash regions read-only until the next reboot.
Change-Id: Ifda826ae2bb28adcce8dda8e2bb16dc38fe0fe9e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Bill XIE <persmule@gmail.com>
Without this remapping code enabled, the system fails to boot properly
if the amount of ram inserted is larger than 4G minus the mmio
space (hardcoded to 1G here).
Change-Id: I02e7ceed0cd9db7eb7182481b6989f80cef31ee5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fix dump_pci_device() broken by commit 65b72ab5 (Drop print_ implementation
from non-romcc boards) in 2015 (!) where only one in 16 bytes were being
dumped.
Also remove the #if made redundant by commit aef8542 (Compile debug.c
only if CONFIG_DEBUG_RAM_SETUP) as this whole file is only compiled in
that case.
Also clean up headers that were included twice.
Change-Id: I60e272b29417039feb15540e49d7300f86e5ed21
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Some of these will move to EARLY_CBMEM_INIT.
Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Never selected in our tree. The vendorcode source
for fam15 also includes fam10 support if required.
Change-Id: Ifff328ecdd8afa988f844b6fd631818b51bd5b5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Vendorcode for f15 also has f10 support, so
AMD_AGESA_FAMILY_10 was never selected.
Change-Id: I9a026c36ace88f1110a52d7e24d3e6ab36508932
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
A small typo in the dll setting code prevented this combination from
booting.
TESTED on ga-g41m-es2l with 800MHz FSB CPU and 667MHz ddr2
Change-Id: Ib013471773c20336ba0902b7f328bfb6ef970747
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Moves receive enable calibration to a separate file to lighten
raminit.c a bit.
Receive enable calibration is quite similar to gm45 so it reuses some
of its function names.
The functional changes are:
* the minimum coarse is now reset for each channel;
* on the second fine search for DQS high, TAP overflow is handled by
increasing medium;
* start coarse at CAS + 1 instead of CAS - 1. Other Intel northbridges
do the same and the results are more in line with register dumps
from vendor bios.
These might improve stability.
TESTED on ga-g41m-es2l
Change-Id: I0c970455e609d3ce96a262cbf110336a2079da4d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Due to low-memory corruptions S3 support has now been
(at least temporarily) removed from AGESA platfroms.
Should we bring it back one day, CAR teardown on S3 path
will happen with an empty stack so ugly backup/recovery
of the stack will no longer be used.
If S3 feature is brought back, resume path code for FCH
will also see partial rewrite and agesawrapper.c file
will not be part of that.
Change-Id: Ib38c04d0e74f600e0b719940d5e2530f4c726cfd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
A decision has been made that boards with LATE_CBMEM_INIT
will be dropped from coreboot master starting with next
release scheduled for October 2017.
As existing implementation of CAR teardown in AGESA can only
do either EARLY_CBMEM_INIT or ACPI S3 support, choose the former.
ACPI S3 support may be brought back at a later date for
these platforms but that requires fair amount of work fixing
the MTRR issues causing low-memory corruptions.
Change-Id: I5d21cf6cbe02ded67566d37651c2062b436739a3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Vagiz Trakhanov