The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems,
based on a modern Kabylake CPU. It also ships with no firmware protection,
(IFD is fully unlocked, no protected regions are set, no Bootguard),
making it an ideal coreboot target. This port is based on the support for
the Skylake-based Purism Librem 13v3, with the following significant
changes:
* EC firmware is contained within the system SPI flash, and so a blob of
EC firmware must be injected to a defined location during image build.
* GPIO layout is different - this is currently just a raw import of the
GPIO configuration from the vendor firmware
* The system has two DIMMs, so an additional SPD address has been added
* The USB port layout is different
* The EC must be enabled at boot time through SuperIO-style logical device
configuration
* EC register layout is different, necessitating changes in the ACPI tables
* The HDA pins are different
* The genx_dec config is different
All hardware appears to work as expected, although the SD reader is
untested.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:
- Hillel: 32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics
This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.
Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
austin-3 was a devel board, retracting
t60 comes in variants with discrete gpu and only intel gpu one
Change-Id: Ic1f7397b8676bdcc15f63d59d87518d35bba5b4d
Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add a common page about Montevina ThinkPads.
- Describe how to disable ME and remove its firmware on these models.
- Describe vendor flash layouts.
Thanks to swiftgeek for his help when writing this, especially the last
paragraph and flash layouts.
Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is a port of https://review.coreboot.org/c/coreboot/+/22337 to the
Haswell northbridge. This code is necessary to support the dGPU of the
t440p. Code was cut and pasted from Sandy Bridge with vendor IDs updated
to the correct Haswell values. Tested on t440p with dGPU on Ubuntu
18.04.4 with 5.3.0-28 kernel. Without patches dmesg reports Nouveau is
unable to read the VBIOS of the dGPU as it has an invalid checksum (I
checked that the ROM in CBFS is correct). With this patch DRM works
correctly with both the Nouveau driver and the Nvidia proprietary
driver. Windows 10 1909 also tested but generates bluescreen once GPU
driver is loaded.
Change-Id: Ie5f089fb6fd774e6c61f4f9281e2945bd44edf27
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a tutorial how to use ME cleaner, and give some basic steps to
strip the ME. Update the Lenovo Sandy Bridge documentation that no
issues could be observed on X220 and give an example flash layout.
Tested on Lenovo X220 with stripped ME and found no issues:
commit: cbc5b99ac9
* Displayport
* VGA
* USB
* Bluetooth
* Wifi
* Wifi-kill switch
* libgfxinit
* SATA
* Audio
* SD-card
* Ethernet
* Keyboard
* Fn-Keys
* Display brightness
* ACPI S3 resume
* Battery events
* CPU temperature reporting
* FAN managment
* Stress test stable
* Youtube videos over Wifi
* stress -c 2 -m 1 -d 1
* glxgears
Change-Id: I0b1d04f00b5dbb38cf04333f2b345749b740a375
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39129
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Fix lists markup
- Some minor fixes in the text (e.g. lowercases)
Change-Id: I812bdbeed6609c31f3428a3020fa4b32ebbb3445
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38948
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Latest Sphinx supports up path traversal in markdown. Replace old
RST code that's no longer needed to prevent it being copy and pasted.
Change-Id: Ieec5cc1f8d91a7fbc003efae465f61e6b72b39dc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Replace xx30 with Ivy_Bridge and xx20 with Sandy_Bridge.
Also add a note that the Ivy_Bridge tutorial doesn't covert T430s and T431s.
Change-Id: I0b65bca83195ec22cc139130e7cb6183c0972484
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Both versions are correct, but especially for one liners indenting them
with four spaces instead of using ``` blocks helps readability of the
source file.
Change-Id: Ie2543c8c4cccefd74e966f784e651ed7dc3a9252
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38720
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update to reflect the beta status of the code.
BUG=N/A
TEST=build
Change-Id: I9d1c42d24578c9420569da7e294d5c723da3c772
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add description of the procedure to create the flash components for this
system.
BUG=N/A
TEST=N/A
Change-Id: I2690dfbe715fa120f840d98c57fdc3fd7e8b45b1
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support
in coreboot is developed by System76 and provided as the default
firmware option. Testing is done on a pre-production model expected to
be identical from a firmware perspective to the production model.
Working:
- Payload
- Tianocore
- CPU
- Intel i7-10510U
- Intel i5-10210U
- EC
- ITE IT5570E running https://github.com/system76/ec
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend/resume
- Touchpad
- GPU
- Intel UHD Graphics 620
- GOP driver is recommended, VBT is provided
- eDP 14-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD
- Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM
- Networking
- M.2 PCIe/CNVi WiFi/Bluetooth
- Sound
- Realtek ALC293D
- Internal speaker
- Internal microphone
- Combined headphone/microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe/SATA SSD-1
- M.2 PCIe/SATA SSD-2
- RTS5227S MicroSD card reader
- USB
- 1280x720 CCD camera
- USB 3.1 Gen 2 Type-C (left)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
Not working:
- TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0
are not currently supported by the intel fast_spi driver.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The BMC and tools interacting with it depend on metadata placed inside
the ROM in order the flash the BIOS.
Add a new tool smcbiosinfo, integrate it into the build system, and
generate a 128byte metadata file called smcbiosinfo.bin on build.
You need to provide the BoardID for every SMC mainboard through a new
Kconfig symbol: SUPERMICRO_BOARDID
Some fields are unknown, but it's sufficient to flash it using SMC
vendor tools.
Tested on Supermicro X11SSH:
* Flashing using the WebUI works
* Flashing using SMCIPMITool works
No further validation is done on the firmware.
Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The table wasn't pretty enough so sphinx complained, while the second
paragraph had trailing whitespace, could be wrapped differently and
also came with a typo.
Change-Id: I6c16a3a1fcc306d0b12043ebec7d4e69e9339d7d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The board is booting Linux and has been briefly tested.
SeaBIOS, TianoCore payload and Linux as payload all seem to work fine.
BUG=N/A
TEST=tested on Facebook Monolith
Change-Id: I65a2e03334af65cfb3f825d43fa0daa6e6c75913
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The mainboard was accidently added due to bad rebase.
Change-Id: Ie7215e551651dbbc8d92316c48e455405923a30b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36077
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The microcode is available in 3rdparty microcode now.
This ucode can be used.
BUG=N/A
TEST=build
Change-Id: I52a04c7dc97608f868ee0b415bbbb328937f18f7
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The microcode is available in 3rdparty microcode now.
This ucode can be used.
BUG=N/A
TEST=build
Change-Id: I1d83a58e9051fa9402666f05e4f2c43e76026dfb
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36854
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The document isn't included in any toc-tree due to a typo.
Change-Id: Ic1491dde2d48b5d004fc28c743bbee6de12f433c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36540
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is based on autoport.
This port is tested on a T440p without a dGPU and can boot Arch Linux
from SATA disk with SeaBIOS payload. The tested components and issues
are in the documentation.
Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- This port should be Reclaim Your Freedom compliant
(not certified yet).
- Untested on boards with external Radeon graphics adapter.
- Some columns on the left-most side of display are completely
black on 1400x1050 IPS display[1]. Display works fine on Linux.
I don't know why it appears like that. So far it has been observed
only with native graphics initialization.
- Only GRUB2 and SeaBIOS payloads tested for now.
- 2504 docking station USB doesn't work under Linux.
Can detect pendrive in GRUB2 payload.
- Sometimes it takes 20s of "pretending it's powered off" to run
coreboot code. Issue is payload agnostic.
Probably caused by missing one capacitor on my unit.
[1] https://imgur.com/a/0wpMGsm
Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This adds another x11 series board, the X11SSM-F, which is similiar to
X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and
Ethernet interfaces.
Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
It is similar to X200s, with U-series CPU, slightly different gpio
setup, no docking support, and no superio chip.
Tested:
- CPU Core 2 Duo U9400
- Slotted DIMM 4GiB*2 from samsung
- Camera
- pci-e slots
- sata and usb2
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from
Linux payload (Heads) and Seabios.
TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in
CB:4294 ) for h8-using devices without a dock.
Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written
when already locked by the sibling thread. In addition it loads microcode
updates on all threads.
To prevent such race conditions only call the code on one thread, such
that the MSRs are only written once per core and the microcode is only
loaded once for each core.
Also add comments that describe the scope of the MSR that is being
written to and mention the Intel documents used for reference.
Fixes crash in SGX MP init.
Tested on Supermicro X11SSH-TF.
Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The port is based on the x201 / t410s.
2537-vg5 / i5, no discrete gpu
Tested and working:
* Native raminit
* Native gfxinit
* Booting Seabios 1.12.1
* Booting from EHCI
* Running GNU/Linux 5.0.0
* No errors in dmesg
* EHCI debug on the devices left side, bottom-right
* Keyboard
* Fn keys (Mute, Volume, Mic)
* Touchpad
* TPM
* Wifi
* Sound
* USB
* Ethernet
* S3 resume
* VBOOT
Testing in progress.
Untested:
* VGA
* Displayport
* Docking station
Bugs:
* AC adapter can't be read from ACPI
* TPM not working with VBOOT and C_ENV BB
Details for flashing externally:
1. Disconnect all power
2. Connect the external flasher
3. Connect the power cord (This fixes internal power control)
4. Remove the power cord
Change-Id: Id9d872e643dd242e925bfb46d18076e6ad100995
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/11791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Fixes an issue with amd/index.md not being part of a toctree
Change-Id: Id419695d24a49951afb844c81cc0951d6920e0d2
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This splits the x11-lga1151-series' documentation into a generic and a
board specific section as a preparation for CB:35427.
Additionally this adds some more information on the x11ssh board.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Create documentation on padmelon, including how to program the SPI. Also
include an index.md pointing to the documentation, as currently there's no
maiboard documentation folder for AMD.
BUG=none.
TEST=none.
Change-Id: I1a684c1acd3fb9441df71e2bc0fffa6131148b98
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most of the X11 boards with socket LGA1151 are basically the same boards
with just some minor differences like different NICs (1 GbE, 10 GbE),
number of NICs / PCIe ports etc.
There are about 20 boards that can be added, if there is a community for
testing.
To be able to add more x11 boards easily like x11ssm (see CB:35427) this
restructures the x11ssh tree to represent a "X11 LGA1151 series". There
were multiple suggestions for the structure like grouping by series
(x10, x11, x...), grouping by chipset or by cpu family.
It turned out that there are some "X11 series" boards that are
completely different. Grouping by chipset or cpu family suffers from the
same problem. This is why finally we agreed on grouping by series and
socket ("X11 LGA1151 series").
The structure uses the common baseboard scheme, while there is no "real"
baseboard we know of. By checking images, comparing logs etc. we came to
the conclusion that Supermicro does have some base layout which is only
modified a bit for the different boards.
X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we
expect the other boards to have mostly the same device tree, there is a
common devicetree that gets overridden by each variant's overridetree.
Besides that some very minor modifications happened (formatting, fixing
comments, ...) but not much.
Documentation is reworked in CB:35547
Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove duplicate headings, move vendor sections that were placed
amidst other vendor hierarchies, and while we are at it, sort it
alphabetically.
Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We generally try to stay away from ascribing attributes to (future)
devs. "Rookie guide" refers to the reader, while "tutorial" refers
to the material.
In the same spirit, move from "lessons" to "parts". It's not school :-)
Change-Id: I11a69a2a05ba9a0bc48f8bf62463d9585da043ec
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add support for the X11SSH-TF which is based on Intel KBL.
Working:
* SeaBIOS payload
* LinuxBoot payload
* IPMI of BMC
* PCIe, SATA, USB and M.2 ports
* RS232 serial
* Native graphics init
Not working:
* TianoCore doesn't work yet as the Aspeed NGI is text mode only.
* Intel SGX, due to random crashes in soc/intel/common
For more details have a look at the documentation.
Please apply those patches as well for good user experience:
Ica0c20255f661dd61edc3a7d15646b7447c4658e
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
DRAM_SIZE_MB should be the maximum size (255GiB / -m 261120M)
that’s possible with QEMU on AArch64 virt because it tries to search
the DRAM_SIZE_MB range to find the true memory size.
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Change-Id: Id479c0b18d1e1adceecdcca13e36119b95617e6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This CL adds a new board, QEMU/AArch64, for ARMv8. The machine supported
is virt which is a QEMU 2.8 ARM virtual machine. The default CPU of
qemu-system-aarch64 is Cortex-a15, so you need to specify a 64-bit cpu
via a flag.
To execute:
$ qemu-system-aarch64 -M virt,secure=on,virtualization=on \
-cpu cortex-a53 -bios build/coreboot.rom -m 8192M -nographic
Change-Id: Id7c0831b1ecf08785b4ec8139d809bad9b3e1eec
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Initial support for Portwell PQ7-M107 (Q7) module.
Code based on Intel Strago mainboard.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107
Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Describe how to run coreboot on the PC Engines apu2 mainboard.
Change-Id: Id1d553c7f7485358960d92e714d50ba0f75b3581
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Describe how to run coreboot on the PC Engines apu1 mainboard.
Change-Id: If79693e893c4afe52bf1c9aa8017ac6f650a96e4
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch adds documentation about the UP² mainboard
and the IFWI used by Apollolake platform.
Change-Id: Ic708ddbd2616eee4e5ec2740b3eac18b408bde38
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
* Add initial board commit based on HP8200 SFF.
* Add documentation.
* Serial and PCIe slot are working.
Tested on HP Z220.
Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initial support for Facebook FBG-1701 system.
coreboot implementation based on Intel Strago mainboard.
Configure 'Onboard memory manufacturer' which must match HW.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701
Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Also add the HP EliteBook document from wiki.
Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Works:
- bootblock, romstage, ramstage
- Serial console UART0, UART1
- SPI flash console
- iGPU init with libgfxinit
- LAN1, LAN2
- USB2, USB3
- HDMI, DisplayPort
- eMMC
- flashing with flashrom externally
WIP:
- Documentation
- VGA
For some reason Seabios can not find the CBFS region
and therefore it can't load seavgabios, but generally
it is working as soon as Linux is booted.
- ACPI
Works not:
- Devices needs proper configuration
- Seabios can't find CBFS region
Untested:
- GPIO pin header
- 60 pin EXHAT
- Camera interface
- MIPI-CSI2 2-lane (2MP)
- MIPI-CSI2 4-lane (8MP)
- SATA3
- USB3 OTG
- embedded DisplayPort
- M.2 slot
- mini PCIe
- flashing with flashrom internally using Linux
Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add information about flash and programming header.
Change-Id: If34016e20dd580f92695bef5b67dd0c282b0b421
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Use rst parser to convert the csv to markdown tables.
Change-Id: I7fd61bd7a4e8818901520311332ae4027e7a7d02
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Now there is no need to additionally configure the FSP
before building;
- PEG works with high link speed 8 GT/s (Gen 3);
- external GPU supported, but dynamic switching between iGPU and PEG
is not yet supported.
Change-Id: Ie0f9db47c0b88052b090cba139f0ae821758935d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31949
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This board is compatible with Intel Skylake and Kaby Lake generation
processors. This patch contains the minimum configuration for booting
and stable operation of the Ubuntu OS (18.04.1, Linux kernel 4.15).
It is based on Intel RVP8 mainboard.
Intel Kaby Lake FSP 3.6.0 is used to initialize CPU and PCH.
Graphics init with libgfxinit.
Works:
- Integrated graphics (only DVI port, tested with 1920x1080);
- PEG x16 (FSP must be configured with BCT to enable PEG);
- all PCIe x1 slots;
- all USB and SATA ports;
- SuperIO COM port for console;
- onboard audio.
TODO:
- other SuperIO functions;
- onboard network chip;
- suspend and resume;
- documentation.
Tested on Intel Core i5-6600 processor with Seabios (rel-1.12.0-10-
g171fc89) and Tianocore/edk2 (vUDK2018-8-ge6eccfc) as a payload.
Change-Id: I69396edc50948cf1d0da649241ce92171d32daf7
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Boots again to payload not found on qemu.
Change-Id: Ie107eb882cbaac5a5a06c1ff990e7b9364377640
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/c/30554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a
clone of X220, with additional USB3 controller on pci-e (as i7 variant
of x220), and a powered ESATA port wired to ata4 (Linux' annotation).
Documentation added.
Tested:
- CPU i5-2520M
- Slotted DIMM 8GiB
- Camera
- Mini pci-e on wlan slot
- Msata on wwan slot
- On board SDHCI connected to pci-e
- USB3 controller connected to pci-e
- NVRAM options for North and South bridges
- S3
- TPM1 on LPC
- Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from
SeaBIOS, or Linux payload (Heads)
Not tested:
- Fingerprint reader on USB2
- Onboard USB2 interfaces (wlan slot, wwan slot)
Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The issue in question was resolved with commit 334be3289d
("nb/intel/haswell: Add support for PEG").
Also add a link to the known issues for Haswell, which has some
information on PCIe.
Change-Id: Icc3061b60893394e3d537d3b86f4ac748cec2eb4
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
PCIe graphics for display output still doesn't work, but that is now
listed in the Haswell-specific documentation.
Change-Id: I28c50db353b2b965eb847b379d9e1944cb720c77
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This board runs well with coreboot. The documentation part of this
commit lists what works and what doesn't.
Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then
boots FreeBSD 11.2. It has also been tested with GRUB directly booting
Debian GNU/Linux 9.6 (kernel 4.9).
Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
At the moment, this just gives some details on the MRC.
Change-Id: I84e8ca2543b2e19b84a24f7d7032a4aedb6e9272
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Without this patch, Sphinx 1.7.9 prints the following warning, and
doesn't emit the table as HTML:
/.../Documentation/mainboard/intel/kblrvp11.md:1: WARNING: Malformed table.
+------------------+---------------------------------------------------+
| CPU | Kaby lake H (i7-7820EQ) |
+------------------+---------------------------------------------------+
| PCH | Skylake PCH-H (called SPT-H) |
+------------------+---------------------------------------------------+
| Coprocessor | Intel ME |
+------------------+---------------------------------------------------+
Change-Id: I17920398126d57eb8815c45e4a0d4b100f46004a
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The code is based on autoport and that for T430s
Tested:
- CPU i5-3337U
- Slotted DIMM 2GiB
- Soldered RAM 4GiB from samsung (There may be more models here)
- Camera
- pci-e and usb2 on M.2 slot with A key for wlan
- sata and usb2 (no superspeed components) on M.2 slot with B key for wwan
- On board SDHCI connected to pci-e
- USB3 ports
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- TPM1 on LPC
- EHCI debug on SSP2 (USB3 port on the left)
- Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from
Linux payload (Heads), Seabios may also work.
Not tested:
- Fingerprint reader on USB2 (not present on mine)
- Keyboard backlight (not present on mine)
- "sticky_fn" flag in nvram
Not implemented yet:
- Fn locking in nvram (may not be identical to "sticky_fn")
- C-based native graphic init (since T431s has eDP instead of LVDS)
- Detecting the model of Soldered RAM at runtime, and loading the
corresponding SPD datum (3 observed) from CBFS (the mechanism may be
similar to that on x1_carbon_gen1 and s230u, but I do not know how
to find gpio ports for that, and SPD data stored in vendor firmware.)
Change-Id: Ic8062cacf5e8232405bb5757e1b1d063541f354a
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Provide pic of the flash IC with pinouts labeled, as well
as additional text about the chip.
Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com>
Change-Id: I9046fa63dcd4d192836417efac68ca7587ac1c91
Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with
kernel 4.9.
This board works quite well under coreboot. A list of what works and
what doesn't can be found in the documentation part of this commit.
The file `data.vbt` matches the VBT in the latest stable version of the
vendor firmware (version 2.20).
Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
* Remove dead code
* Add support for types 2504 and 2505
* Print dock info at romstage entry
* Improve dock disconnect for type 2505
* Move defines into dock.h for future ACPI code
* Reduce timeouts according to spec to decrease boot time on error
* Fix no docking detection (reduces boot time by 1 second)
* Configure GPIO LDN before reading GPIOs
* Use Kconfig values instead of fixed defines
* Add documentation
Tested on Lenovo T500 with docking 2504 and 2505.
Change-Id: Ic4510ffadc67da95961cecd51a6d8ed856b3ac99
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/29418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move the usage instructions from their ad-hoc place in Kconfig.name to
the Documentation directory, and expand them a bit.
Change-Id: Id6c7bbca40a21ecba00cab736af2f2662a985106
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
* Convert PNG to JPG and reduce image quality.
* Mark flash IC and USB serial connector.
* Mark SPI programming header.
* Add programming header pinout.
Change-Id: Ica5958545ed23573a0d48dfa422ad1a822d06b47
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
SiFive's website was reorganized, which broke our links to PDF files.
Update these links to the current ones, obtained by browsing
https://sifive.com/documentation/.
Change-Id: I312de84bf12abb0789bdd971c40033f1e4ea0dd1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Uniformize the Yes/No in the tables, expand the internal programming
section and explain how to patch a defective flash descriptor.
Change-Id: I972bb8948c29ce0eba46daa92ce6b6052db7b063
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This heading should not be a top-level heading, because it's not at the
top of the file.
Also remove the trailing colon, because it's unnecessary in a heading.
Change-Id: I0685bb8734ad899c29618d24c0497e4fb8c0d01c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
* Add basic flashing tutorial
** Describe internal and external flashing
** Describe flash supply diode protection
** Gives general advices on flashing
** Describe how to use flashrom --ifd
* Describe basic flashing on Lenovo T4xx devices
** Describe how to disassemble and access the flash IC on T4xx
** Describe flash layout on Sandy Bridge and Ivy Bridge series.
Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add "j pc + 0x0800" at the beginning of the MBR to jump to bootblock.
Tested on hardware:
boot mode 15: works as before
boot mode 1: jump to bootblock works, but bootblock needs to be modified to
move the stack to L2LIM. This will be in a separate commit.
Further changes are needed in the bootblock
Change-Id: I16e762d9f027346b124412f1f7ee6ff37f431d86
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/27397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Provides minimal functionality to read the SOC s/n from the NeoFuse
one time programmable memory.
Change-Id: I14b010ad9958931e0a98a76f76090fd7c66f19a0
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/27435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
This supports the Foxconn d41s, d42s, d51s, d52s.
The following is tested (SeaBIOS 1.12 + Linux 4.9) and works:
- COM1
- S3 resume (with SeaBIOS needs sercon disabled)
- Native graphic init on VGA output
- SATA
- USB
- Ethernet
- PS2 keyboard
The base for this mainboard port was the Intel D510MO port.
Change-Id: Ie4ec9cbf70adcdddbc2e5d805e4806825c320072
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28227
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with
kernel 4.9. This code is based on the output of autoport.
The file `data.vbt` matches the VBT in the latest version of the vendor
firmware (version 4601).
This board works well under coreboot. A list of what works and what
doesn't can be found in the documentation part of this commit. To
summarise: the only known issues are that S3 suspend/resume doesn't
work, and that there is no automatic fan control via the super I/O.
Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/27798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Gigabyte was not in the list of vendors in the mainboard-specific
documentation. This made a newly added mainboard page difficult to
locate. This commit adds Gigabyte and links said mainboard in the
mainboard-specific documentation main page.
Change-Id: I8839e1c1176fbdc3dd9da616f68c58e8e1cf1b16
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
* Add more subdirectories and index.mds.
* Move "getting started" and "lessons" into sub-directories.
* Move "NativeRaminit" into northbridge/intel/sandybridge folder.
* Move "MultiProcessorInit" into soc/intel/icelake folder.
* Reference new files
Change-Id: I78c3ec0e8bcc342686277ae141a88d0486680978
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26262
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Matthew Garrett