PSP_MAILBOX_BAR is defined as PCI_BASE_ADDRESS_4, so use it instead of
PCI_BASE_ADDRESS_4 in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8658b674b9adea85dfc71d7036ccf3ae17464b58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
PSPV2_STATUS_ERROR and PSPV2_STATUS_RECOVERY aren't used and the bit
definitions are also wrong, so drop those defines. For the PSP mailbox
interface version 2, struct pspv2_mbox is used to access the correct
status bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e2aadfde00e2f7b0f99b462b8e3d6954959a584
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The checking register will be cleared after EC resets, so we move
bustracker dump from ramstage to bootblock, before triggering EC reset.
TEST=bustracker shows status before watchdog resets
BUG=b:207743045
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There will be no log in cbmem if we trigger ec reset on bootblock
stage. Therefore, call dcache_clean_all() before triggering ec
reset to flush cache to store logs on cbmem.
BUG=b:207743045
TEST=show logs on cbmem
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The patch enables cse_fw_sync() before DRAM initialization.
cse_fw_sync() sends HECI commands in order to set CSE's boot partition
and to trigger CSE firmware update.
As part of CSE firmware update, coreboot sends HMRPFO_ENABLE HECI
command. Since CSE supports the command after DRAM Initialization,
cse_fw_sync() is called after DRAM initialization.
Starting from CSE Litev16.0.15.1545, CSE support HMRFPO_ENABLE command
before DRAM initialization too. So, cse_fw_sync() is called before DRAM
initialization.
BUG=b:175516533
TEST=Dependency with CSE Litev16.0.15.1545 integration
Change-Id: Iad7403650df8bc4e40aa6e48ccfeba95a5789a2d
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55364
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage
the same logic (to skip 2nd SIPI and reduce delay between
INIT and SIPI while perform AP initialization) even on
newer Intel platform.
Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Raise little CPU to 2GHz at romstage.
TEST=check little core cpu frequency is 2GHz
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The types of pwrap_read_field()'s return value and pwrap_write_field()'s
`val` argument are u16, so correct the usage in MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com>
Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power
related settings.
Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for
ADL-P 482(28W) and 442(45W).
BUG=b:193864533
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE
clarifies the scope of those definitions. For consistency also add this
prefix to MMIO_DST_FABRIC_ID_SHIFT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register
is bit 12, but that has changed to bit 16 in Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I64c06b84e2c0737b259077e7932f418306638e19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change
the name of the define to FCH_AOAC_REF_CLK_OK_STATE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
There were only definitions for removing low, high or both glitches, but
not to not remove glitches, so add this too for completeness.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so
change it to DEB_GLITCH_REMOVE which should clarify what this will do.
The description for this value in the PPR/BKDG is "Remove glitch". This
also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the
only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Those methods were only in the non-common Stoneyridge GPIO ACPI code
that got dropped, so drop those unused methods too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so
we can use the common AMD SoC GPIO ACPI code.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
De-duplicate the definitions for the pin status bit and use this new
definition in both the C and the ACPI code.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The GPIO_WAKE_* definitions are the ones that are used in the code, so
drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move
the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were
before this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I622673cc72107908b525a65212061062f32e13dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK,
GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code
so use those instead of magic numbers.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and
GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded
line breaks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The corresponding bit is marked as reserved in the following versions of
the documentation for all SoCs using this code:
Mullins: BKDG #52740 Rev 3.05
Stoneyridge: BKDG #55072 Rev 3.04
Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18
Raven2: PPR #55772 Rev 3.08
Cezanne: PPR #56569 Rev 3.03
The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as
PullUpSel, but this is no longer the case in newer versions. It is
unclear if this got de-featured or if it was never present in the
silicon. To be consistent with the current documentation, drop this
define.
This patch also change the definition of GPIO_PULL_MASK to only cover
the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a
default value of 0 for this bit after reset, so the resulting values in
the register aren't expected change. The other PPRs/BKDGs don't specify
a reset value for this bit, but it's likely safe to assume that all SoCs
that use the new GPIO interface use the same GPIO building block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
On ADL, we actually use debug consent 2 for soc debug by DBC
Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update SA table as per latest EDS (Doc no: 601458).
Add extra SKUs accordingly.
Signed-off-by: Rick Lee <rick.lee@intel.com>
Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan
Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
This patch moves common thermal API between chipsets
with thermal device as PCI device and thermal device behind PMC
into common file (thermal_common.c).
Introduce CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV to let SoC
Kconfig to select as applicable for underlying chipset.
+------------------------------------------------------+--------------+
| Thermal Kconfig | SoC |
+------------------------------------------------------+--------------+
| CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV | SKL/KBL, CNL |
| | till ICL |
+------------------------------------------------------+--------------+
| CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC | TGL onwards |
| | ICL |
+------------------------------------------------------+--------------+
Either of these two Kconfig internally selects
CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL to use common thermal APIs.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp platform.
Change-Id: I14df5145629ef03f358b98e824bca6a5b8ebdfc6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
commit e0844636ac (acpi: Move ACPI table
support out of arch/x86 (2/5)) moved the main acpi header file from
arch/x86/include/acpi/acpi.h to include/acpi/acpi.h, so change the
comment in here to point to the current location.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5fddd1cd5eefd83816b1c966b5c7edf53eb2486d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Cezanne already uses a define for this and it's better to define and use
constants instead of magic values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa4b3b3cdb161670128b284a3396fc5a85545608
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Disable PSE loading by default. If left enabled (current default),
the EHL coreboot will end up in endless restart loop, due to FSP
unable to locate PSE FW image and trigger global reset.
However disabling this flag (PchPseEnable) will cause the coreboot
to trigger a single reset due to CSE signal (HECI: CSE does not
meet required prerequisites). The reason behind this is that FSP
need to perform static disabling (power gate) to fully shut down
PSE HW, and to do this will need to global reset entire system
including CSE. Then PMC will power gate PSE from the start.
To avoid this behavior, the best way to disable PSE is to disable
via IFWI FIT softstrap (For specific detail can refer to Intel EHL
coreboot MR2 release notes). With this, PMC will power gate PSE
from the first cold boot and system will boot happily without
single reset behavior.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
When the cpu_cl_discovery is called, coreboot actually assigns a BAR
to cpu crashlog pci device. Hence, we don't need to assign a tmp BAR
for cpu crashlog pci device
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in depthcharge
Change-Id: Ib7e6772be51ec4f26ef31fed6cb2bddef8ffc6be
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add option to initialize the TPM in PSP verstage during s0i3 resume.
This is needed if the TPM is reset in s0i3. FSDL is handling
restoring everything else, so only the minimum TPM initialization is done.
Move aoac and i2c init before psp_verstrage_s0i3_resume becasue i2c
needs to be ready before attempting to restore tpm.
BUG=b:200578885,b:197965075
TEST=Multiple cycles of S0i3 suspend resume. ~66ms of additional delay.
BRANCH=None
Change-Id: Ie511928da6a8b4be62621fd2c4c31a8d1e724d48
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Some weird things happen inside FSP and the routing is not correctly
applied, with PIN D being used but lacking a proper routing in ACPI.
To work around this issue generate _PRT for all 4 INT pins.
Change-Id: I5be6e4514f8c6a47bb887d9f9b95181c9f426a51
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add .enable method that will set the CSME state. The state is based on
the new CMOS option me_state, with values of 0 and 1. The method is very
stable when switching between different firmware platforms.
This method should not be used in combination with USE_ME_CLEANER.
State 1 will result in:
ME: Current Working State : 4
ME: Current Operation State : 1
ME: Current Operation Mode : 3
ME: Error Code : 2
State 0 will result in:
ME: Current Working State : 5
ME: Current Operation State : 1
ME: Current Operation Mode : 0
ME: Error Code : 0
Tested on:
KBL-R: i7-8550u
CML: i3-10110u, i7-10710u
TGL: i3-1110G4, i7-1165G7
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I374db3b7c0ded71cdc18f27970252fec7220cc20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Thermal configuration registers are now located behind PMC PWRMBASE
for Alder Lake Point PCH. Hence, ADL SoC to select
SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold
is being set as per mainboard provided `pch_thermal_trip`.
Note: These thermal configuration registers are RW/O hence, setting
those early prior to FSP-S helps coreboot to set the desired low
thermal threshold for the platform.
BUG=b:193774296
TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior
to FSP-S shows that registers are now programmed based on
'pch_thermal_trip' and lock register BIT31 is set.
Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Thermal configuration has evolved over PCH generations where
latest PCH has provided an option to allow thermal configuration
using PMC PWRMBASE registers.
This patch adds an option for impacted SoC to select the Kconfig
for allowing thermal configuration using PMC PCH MMIO space.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp platform.
Change-Id: I0c6ae72610da39fc18ff252c440d006e83c570a0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59209
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch uses `clrsetbits32` helper function to set thermal
device Low Temp Threshold (LTT) value.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp with this change.
Change-Id: I51fea7bd2146ea29ef476218c006f7350b32c006
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59310
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures IA common thermal block is now able to compile
under romstage with necessary compilation issues fixed.
BUG=b:193774296
Change-Id: I3279f55436977ab9a47e04455d8469e50b5c33c8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59391
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`struct device *dev` as part of the pch_get_ltt_value() argument is
being used hence, replace with `void`.
BUG=b:193774296
Change-Id: Iecdf6f6c3023f896a27e212d7c59b2030a3fd116
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59390
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates the VccIn Aux Imon IccMax for ADL-M
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I21753f2e5e9867f22c05e087cbf1f1e097d28bca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add separate gpio table for TPM i2c and interrupt. Remove TPM gpios from
early_gpio_table. This allows for initializing TPM gpios separately from
other gpios.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I51d087087b166ec3bb3762bc1150b34db5b22f2f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59083
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Related to https://review.coreboot.org/c/coreboot/+/58555
commit-id: 35b7e0a2d82ac
In 58555, we added the SOC ID for Stoneyridge in amdfwtool
command line. But it raised building error because it then called
"set_efs_table" without setting SPI mode. So we skipped calling that.
But in set_efs_table, it has case for Stoneyridge. The boards also
need to have this setting. So we remove the skipping and give the
proper SPI mode in mainboard Kconfig.
Change-Id: I24499ff6daf7878b12b6044496f53379116c598f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This reverts commit 1399442289.
Reason for revert:
Some Cr50 chips with old firmware version (x.y.22) don't support
long pulse interrupt command, requiring dynamic GPIO PM to be disabled
to intercept short pulse interrupt.
Due to this coreboot needs to expose SGPM, RGPM and EGPM ACPI methods
to support power gating of GPIO communities from the kernel when dynamic
GPIO PM is disabled.
BUG=b:204832081
BRANCH=None
Test= S0ix works with dynamic PM disabled.
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Change-Id: I2b5b00878062f8a499641d7a47db54ed078cd6cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Make psp verstage initialization more granular be splitting
verstage_soc_init into separate functions. Specifically, create
soc init functions for espi, i2c spi, and aoac.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I489889a0dfd4016aa4f2b53a2c6a7a1ea4459e60
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This patch adds support for loading SPM firmware from CBFS to SPM SRAM.
SPM needs its own firmware to enable SPM suspend/resume function which
turns off several resources such as DRAM/mainpll/26M clk when linux
system suspend.
TEST=program counter of SPM is correct value(0x250) after booting up
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia13e5a2ecf09561856b7e958128cd2f045c39f33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59341
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I92eb501a1e48dd02d2f94ff392933261e6a42391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Setting of MSDC is defined by soc, so we move them to soc folder.
TEST=emerge-cherry coreboot; emerge-asurada coreboot
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
DCM (dynamic clock management) can dynamically slow down or gate clocks
during CPU or bus idle. Enable DCM settings on the MT8186 platform.
TEST=build pass and check register ok
BUG=b:202871018
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com>
Change-Id: I82add5ae629d59f7d6773e26ac9cba9d54ab8caf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch modifies the pch_get_ltt_value() function return type from
uint16_t to uint32_t to accommodate platforms with more than one thermal
threshold.
For example: Alder Lake PCH Trip Point = T2L | T1L | T0L
where T2L > T1L > T0L.
BUG=b:193774296
Change-Id: I5f46ccb457b9cfebf13a512eabb3fb0fab8adb39
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Now that CBFS has this functionality built in, we no longer need to
manually code it.
payload_preload used to use the payload_preload_cache region to store
the raw payload contents. This region was placed outside the firmware
reserved region, so it was available for use by the OS. This was
possible because the payload isn't loaded again on S3 resume.
cbfs_preload only uses the cbfs_cache region. This region must be
reserved because it gets used on the S3 resume path. Unfortunately this
means that cbfs_cache must be increased to hold the payload. Cezanne is
the only platform currently using payload_preload, and the size of
cbfs_cache has already been adjusted.
In the future we could look into adding an option to cbfs_preload that
would allow it to use a different memory pool for the cache allocation.
BUG=b:179699789
TEST=Boot guybrush and verify preloading the payload was successful
CBFS DEBUG: get_preload_rdev(name='fallback/payload') preload successful
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idc521b238620ff52b8ba481cd3c10e5c4f1394bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
eGPIO is a scheme which allows special power island domain IOs to be
reused as regular chip GPIOs by muxing regular TLMM functions with
Island Domain functions. Allow the eGPIO to be configured via
gpio_configure API to be used as a TLMM gpio.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Change-Id: Ib2598a41ba3bb8a8a2acff8253b5bb78633f89f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to
access eMMC in the very early stage (for example, depthcharge needs it
20ms after started) so we have to start initialization in coreboot.
TEST=boot kernel from eMMC ok
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bc06b1fc506b1d6f54f7f456117d22477a87e29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The Corsola reference design has both eMMC and SD Card interfaces
so we have to configure both in RAM stage.
TEST=build pass
BUG=b:202871018
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Change-Id: I2f26a8a11edd29a80a7195e3a324151d66ecb293
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The _Static_assert without message string is only available
since C++17. Add the message to avoid build fail in the macro.
BUG=b:203145462
BRANCH=cherry
TEST=build pass and boot pass
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ib146ffafc21b9dbb9d383c9343a9ec1d7c478faf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59298
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CPUCP is CPUSS Control Processor. It refers to the firmware for control
CPUSS active power management.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Change-Id: Idac22c8cb231658616999bc577bdf49f9aa7ae74
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
There are currently two users of the SPI hardware, the LPC SPI DMA
controller, and the boot_device_rw device. We need to ensure exclusivity
to the SPI hardware otherwise the SPI DMA controller can be interrupted
and it will silently skip transferring some blocks.
Depending on the SPI speed, this change might add a small delay when
clearing the elog since a DMA transaction might be in flight. I'll
continue optimizing the boot flow to avoid the delay.
BUG=b:179699789
TEST=Hack up the code to interleave SPI transactions and verify this
patch fixes the silent data corruption.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5eee812a6979c8c0fb313dd2fbccc14b73d7d741
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This reverts commit adb393bdd6.
This relands commit 6260bf712a.
Reason for revert:
The original CL did not handle some devices correctly.
With the fixes:
* commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants'
early GPIO tables)
* commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early
GPIO tables)
* commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage
This CL also fix the following platforms:
* Change to always trusted: cyan.
* Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus,
poppy, reef, volteer.
* Add to both Makefile and early GPIO table: zork.
For mb/intel:
* adlrvp: Add support for get_ec_is_trusted().
* glkrvp: Add support for get_ec_is_trusted() with always trusted.
* kblrvp: Add support for get_ec_is_trusted() with always trusted.
* kunimitsu: Add support for get_ec_is_trusted() and initialize it as
early GPIO.
* shadowmountain: Add support for get_ec_is_trusted() and initialize
it as early GPIO.
* tglrvp: Add support for get_ec_is_trusted() with always trusted.
For qemu-q35: Add support for get_ec_is_trusted() with always trusted.
We could attempt another land.
Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
VT-d needs to disabled for early silicons as it results in a
CPU hard hang.
BUG=b:197177091
Test=Boot brya to OS with no hang
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I0b9b76b6527d8b80777cb7588ce6b12282af7882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
For the stoneyridge, soc_name is not set in Makefile, so set_efs_table
is not called. Keep it unchanged.
Change-Id: I0e82188ce64733420a578446e22a077ef789be92
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
None of the *_DEVID defines was used in the code, so drop those. The SoC
code uses the PCI ID defines from include/device/pci_ids.h instead.
Since it might still be useful to have the PCI device IDs as a reference
in the SoC's pci_devs.h, add those as comments instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c77d648dac57b15b56f631bd8b2494676c00a8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add Kconfig option `SOC_INTEL_TIGERLAKE_S3` which will adjust
the ACPI to not offer D3Cold when using S3.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieb1cc3d6a03cb452ff38ae393a993e881d9b5ff4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Software Connection Manager doesn't work with Linux 5.13 or later and
results in TBT ports timing out. Not advertising this results in
Firmware Connection Manager being used and TBT works correctly.
Linux patch:
c6da62a219
Tested on:
* StarBook Mk V
* System76 Oryx Pro 8
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib947c3c9cd843e54d4664509c15336178c0bc99e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Add support for VMCH and VMC of MT6366.
TEST=measure voltage 3.3V for VMCH and VMC
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Id8d98b6d827abd4713ee5c216941a9621422c7eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
1. Enable and setup USB drivers.
2. Pull up to a weak resistor for USB3_HUB_RST_L and we reset
the hub via GPIO149.
TEST=boot kernel from USB ok
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifcc11d51b0c1e495477957111e6021ef8275f629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
1. Turn off L2C SRAM and reconfigure as L2 cache
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
2. Configure DMA buffer in DRAM
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If56d29cdd7d9dfaed05e129754aa1f887a581482
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Move mtk_soc_disable_l2c_sram and mtk_soc_after_dram to common folder
which are the same between MT8192, MT8195 and MT8186.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I8f49214b932a8d28ed2ca0d764dc745fa8ad330d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Change help text to "dual IO read mode" to reduce noun confusion.
Suggestion from this comment:
https://review.coreboot.org/c/coreboot/+/58837/comment/40a98af1_dce6bb2b/
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I54b81cdeba3b693451f66e003fb470c9f8c19ad9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
CONFIG(SMP) was an invalid condition to use in cases where one
stage requires spinlocks and another one does not. The
stage not requiring spinlock still required <smp/spinlock.h>
to be implemented with no-op stubs.
This reverts commit 037ee4b556
soc/amd/picasso: Add dummy spinlock for psp_verstage
Change-Id: Iba52febdeee78294f916775ee9ce8a82d6203570
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add separate gpio table for early eSPI bus init. Remove espi GPIO from
early_gpio_table. This allows for initializing eSPI separately from
other GPIOs. Simplify verstage_mainboard_early_init.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I0cd439f207df7c27575ae363b207293d40485bf8
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This change adds about 30 KiB to FSP-M. When not using the SPI DMA
controller, this change actually has a ~7 ms boot time penalty. When
we use the DMA engine, we end up with about a 5 ms decrease. Once we
switch to 100 MHz SPI this will help even more since we have effectively
eliminated the decompression time.
BUG=b:179699789
TEST=Boot nipperkin to OS and take boot time measurements
fspm.bin 0x2efc0 fsp 90953 LZMA (233472 decompressed)
fspm.bin 0x2cfc0 fsp 121156 LZ4 (233472 decompressed)
- FSP-M / no async -
| 508 - finished loading body | 177.019 | 179.384 Δ( 2.36, 0.16%) |
...
| 970 - loading FSP-M | 0.346 | 0.346 Δ( 0.00, 0.00%) |
| 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.01 Δ( 0.00, 0.00%) |
| 18 - finished LZ4 decompress (ignore for x86) | 53.916 | 59.475 Δ( 5.56, 0.37%) |
- FSP-M / async -
| 508 - finished loading body | 177.185 | 179.689 Δ( 2.50, 0.18%) |
...
| 970 - loading FSP-M | 0.989 | 0.99 Δ( 0.00, 0.00%) |
| 17 - starting LZ4 decompress (ignore for x86) | 9.483 | 12.877 Δ( 3.39, 0.24%) |
| 18 - finished LZ4 decompress (ignore for x86) | 10.833 | 0.312 Δ(-10.52, -0.75%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7d0363d27d98d4ed3afc6f802a13ff7986391921
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Calling reboot_into_recovery with NULL context fails. Initializing ctx
early also fails because the cmos is not ready until after
verstage_soc_early_init. So just reboot and hope for the best.
BUG=None
TEST=Boot guybrush, suspend/resume guybrush
BRANCH=None
Change-Id: I7267a14ab048781b8998d3a6f4220de10e7df250
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The 64-bit compiler x86_64-linux-gnu-gcc-10 aborts the build with the format
warning below:
CC romstage/soc/intel/xeon_sp/memmap.o
src/soc/intel/xeon_sp/memmap.c: In function 'fill_postcar_frame':
src/soc/intel/xeon_sp/memmap.c:39:62: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
39 | printk(BIOS_DEBUG, "cbmem base_ptr: 0x%lx, size: 0x%lx\n", cbmem_base, cbmem_size);
| ~~^ ~~~~~~~~~~
| | |
| long unsigned int size_t {aka unsigned int}
| %x
As `cbmem_size` is of type `size_t` use the appropriate length modifier
`z`.
Change-Id: I1ca77de1ce33ce1e97d7c8895c6e75424f0769f5
Found-by: gcc (Debian 11.2.0-10) 11.2.0
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lance Zhao
List of changes:
1. Add PEG60/10/62 IDs (0x464d/0x460d/0x463d) into device/pci_ids.h
2. Add these new IDs into pcie_device_ids[] in pcie.c
BUG=b:205668996
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: Idc8a09b0579e1e6053ed2e35b7556a180a5f0088
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Add APU device apc driver and set up permissions.
APU has its own device apc for control access by domains.
For Domain 0, the access to the following slaves are restricted to
security read and write:
apusys_ao-2, apusys_ao-4, apusys_ao-5, apu_sctrl_reviser,
apu_iommu0_r1 apu_iommu0_r2, apu_iommu0_r3, apu_iommu0_r4
apu_iommu1_r1, apu_iommu1_r2, apu_iommu1_r3,apu_iommu1_r4
For VPU, D0/D5 are set as no protection, other domains are forbidden.
For other slaves, the D0 is no protection, other domains are forbidden.
BUG=b:203145462
BRANCH=cherry
TEST=boot cherry, check dump log and test permissions
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: If92d3b02ac4966332315b85d68e0f48c6a9fce85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
FSP-S is normally memmapped and then decompressed. There are about 7 ms
between starting ramstage, and loading FSP-S. By preloading we can
ensure the fsps.bin is already in RAM by the time we need it. This
reduces boot time by about 7 ms.
BUG=b:
TEST=Boot nipperkin and see ~7ms reduction in boot time
| 10 - start of ramstage | 0.044 | 0.044 Δ( 0.00, 0.00%) |
| 30 - device enumeration | 1.899 | 2.073 Δ( 0.17, 0.01%) |
| 971 - loading FSP-S | 6.645 | 6.628 Δ( -0.02, -0.00%) |
| 15 - starting LZMA decompress (ignore for x86) | 0.016 | 0.01 Δ( -0.01, -0.00%) |
| 16 - finished LZMA decompress (ignore for x86) | 15.266 | 8.316 Δ( -6.95, -0.47%) |
| 954 - calling FspSiliconInit | 0.08 | 0.09 Δ( 0.01, 0.00%) |
CBFS DEBUG: _cbfs_alloc(name='fsps.bin', alloc=0xc9761e5c(0xc97a3f0c), force_ro=false, type=-1)
CBFS: Found 'fsps.bin' @0x1a1fc0 size 0x102cd in mcache @0xc97dd208
waiting for thread
took 1 us <-- fsps.bin was preloaded
CBFS DEBUG: get_preload_rdev(name='fsps.bin') preload successful
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5a728047b8ad92d70bba8485017579aa3df48d95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
This will enable reading FSP-S/M using the SPI DMA controller.
BUG=B:179699789
TEST=Build guybrush with SPI DMA enabled and verify alignment is set
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I282b9989d8e95c93603c6f69616a8f236a4e2e35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: Id25d2797a91b05264b1a76fa8faec0533dd5ac78
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59120
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: I83cf1a3a1a3854c9283ccac5e254357a32638dda
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59118
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the `azalia_program_verb_table()` function in preparation to
deduplicate Azalia init code.
Change-Id: I22cfee41e001c9ecf4fbac37aadbd12f43ac8aaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59116
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move SGX ACPI code to block/acpi. Also move the register definitions
there, since they are misplaced in intelblocks/msr.h and are used only
once anyways.
Change-Id: I089d0ee97c37df2be060b5996183201bfa9b49ca
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
List of changes:
1. Create Module Type macros as per Memory Type
(i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation
issue due to renaming of existing macros due to scoping the Memory
Type.
2. Use dedicated Memory Type and Module type for `Form Factor`
and `TypeDetail` conversion using `get_spd_info()` function.
3. Create a new API (convert_form_factor_to_module_type()) for
`Form Factor` to 'Module type' conversion as per `Memory Type`.
4. Add new argument as `Memory Type` to
smbios_form_factor_to_spd_mod_type() so that it can internally
call convert_form_factor_to_module_type() for `Module Type`
conversion.
5. Update `test_smbios_form_factor_to_spd_mod_type()` to
accommodate different memory types.
6. Skip fixed module type to form factor conversion using DDR2 SPD4
specification (inside dimm_info_fill()).
Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx.
BUG=b:194659789
TEST=Refer to dmidecode -t 17 output as below:
Without this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Unknown
....
With this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Row Of Chips
....
Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Since the if block contains multiple statements, it uses curly braces
around them, so also add curly braces around the else block even though
it only contains one statement.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia8d6b45ec16916ff77078446414de259cffa1475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59070
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use bitwise or instead of additions to build bit masks with multiple
bits set.
TEST=Timeless build results in identical image on amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42cc6686d8fa3f694a46ba4ca801a822ef1db1d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In both the Picasso PPR (rev 3.16) and the Cezanne PPR (rev 3.03) bit 16
of the misc I2C pad control registers is defined as BiasCrtEn, so rename
I2C_PAD_CTRL_BIOS_CRT_EN to I2C_PAD_CTRL_BIAS_CRT_EN.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If39ac17a433cb90c944fdde038cd246a995e193a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59028
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GNVS should not be used for values that are static at runtime. Thus,
use SSDT for the SGX fields.
Change-Id: Icf9f035e0c2b8617eef82fb043293bcb913e3012
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Avoid indirect <vc/google/chromeos/chromeos.h> as the
files really only need <security/vboot/vboot_common.h>.
Change-Id: Ic02bd5dcdde0bb5c8be0e2c52c20048ed0d4ad94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Technically, it's not depending on the hardware but on the software
(OS/payload), if the PM Timer is optional. OSes with ACPI >= 5.0A
support disabling of the PM Timer, when the respective FADT flag is
unset. Thus, drop this guard.
For platforms without hardware PM Timer (Apollo Lake, Gemini Lake) the
Kconfig `USE_PM_ACPI_TIMER` depends on `!NO_PM_ACPI_TIMER`.
As of this change, new platforms must either implement code for
disabling the hardware PM timer or select `NO_PM_ACPI_TIMER` if no such
is present.
Change-Id: I973ad418ba43cbd80b023abf94d3548edc53a561
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lance Zhao
We no longer need to do this since we relocate at runtime.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibef849d5b3f0290cb7b7c5ff18aabe002bf53344
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The follow up CLs will use CBFS_PRELOAD. The default CBFS_CACHE_SIZE was
derived by examining the `cbfstool print` output and summing the files
we intend to preload.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I208067e6ceec6ffb602a87bee3bf99a0a75c822d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This gives us a knob that can be controlled via a .config to
enable/disable file preloading. I left the option disabled because
there is currently a race condition that can cause data corruption when
using the SPI DMA controller. The fix will actually introduce a
boot time regression because the preloads are happening at the same time
as the elog init. I want to keep preloading disabled for now until
I get all the sequencing worked out.
BUG=b:179699789
TEST=Boot guybrush and verify no preloading happens.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie839e54fa38b81a5d18715f190c0c92467bd9371
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since all other defines for the number of certain things are at the top
of the file, move NUMBER_SMITYPES there as well to keep things
consistent.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfb599531d6cc382ab258bd1eae89e7b35fa9e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SCIMAPS is the total number of SCI to GEVENT mappings. configure_scimap
returns early when the scimap is greater or equal than SCIMAPS, so for
SMITYPE_ACDC_TIMER it returned early without doing what was expected
from it to do despite that being a valid value, so fix this off-by-one.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibaf8c5618ddbf0b8d4cd612a7f1347d8562bbfcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
EINT event mask register is used to mask EINT wakeup source.
All wakeup sources are masked by default. Since most MediaTek SoCs do
not have this design, we can't modify the kernel EINT upstream driver to
solve the issue 'Can't wake using power button (cros_ec) or touchpad'.
So we add a driver here to unmask all wakeup sources.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84946c2c74dd233419cb94f013a42c734363baf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The NOR-Flash can be configured on SPI0 or TDM-RX GPIOs so we have to
provide an init function in SoC for the mainboard to select right
configuration.
TEST=boot to romstage
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I285ec64ace8b72a48ef1d481d366bd67cb9b0337
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Rewrite level type check and use unsigned types. In addition, also use
unsigned types in the `get_cpu_count()` function.
Change-Id: I63f236f0f94f9412ec03ae25781befe619cf7c1f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reduce the visibility of the `get_threads_per_package()` function and
retype its return value to `unsigned int`.
Change-Id: Ie71730d9a89eb7c4bb82d09d140fbcec7a6fe5f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: I2a57ea1c2f5b156afd0724829e5b1880246f351f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Makes it so I can enable SPI debugging without modifying the source.
BUG=b:179699789
TEST=Add CONFIG_SOC_AMD_COMMON_BLOCK_SPI_DEBUG=y to my .config
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie3815e0398b5268874039196a625fc29dd3dc3d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This reduces the number of selects required in the SOC_SPECIFIC_OPTIONS.
BUG=b:179699789
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7f1364fc269ea5ec17982bf750a164a3290adb0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The name looked a bit odd and the Cezanne PPR #56569 Rev 3.03 confirmed
that the native function names don't have the EMMC_ prefix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I917c74afd98f2e2133e160d352f11f08c19a3ec6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This makes this header file consistent with the rest.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice2872b4a24032d3a65777795943602cd2595de7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
MT8186 requires writing speical value to mode register to clear
status register. The flow of clear status is different from other
platforms, so we override mtk_wdt_clr_status() for MT8186.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I290b69573a8e58db76814e16b5c17c23413f1108
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58835
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mtk_wdt_clr_status is different for MT8186 and MT8195,
so we move this function to soc folder.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia8697ffdca1e2d1443f2259713c4ab6fdf1b1a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58834
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Somehow missed renaming those when creating the coreboot support for
Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I13c28f67d32ba987987cfc2b45e248d535ccdca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
When the mp_init_with_smm call returns a failure, coreboot can't just
continue with the initialization and boot process due to the system
being in a bad state. Ignoring the failure here would just cause the
boot process failing elsewhere where it may not be obvious that the
failed multi-processor initialization step was the root cause of that.
I'm not 100% sure if calling do_cold_reset or calling die_with_post_code
is the better option here. Calling do_cold_reset likely here would
likely result in a boot-failure loop, so I call die_with_post_code here.
BUG=b:193809448
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifeadffb3bae749c4bbd7ad2f3f395201e67d9e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The comments are not correct anymore. With AGESA there is no need to
synchronize TOM_MEMx msr's between AP's. It's also not the best place
to do so anyway.
Change-Id: Iecbe1553035680b7c3780338070b852606d74d15
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The line length is no longer limited to 80 characters, so there's no
need for that line break any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7a8fb472f00e039f25a71ee526a3dd0bc6c754f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Disable the PM ACPI timer during PMC init, when `USE_PM_ACPI_TIMER` is
disabled. This is done to bring SKL, CNL, DNV in line with the other
platforms, in order to transition handling of the PM timer from FSP to
coreboot in the follow-up changes.
Disabling is done in `finalize` since FSP makes use of the PMtimer.
Without PM Timer emulation disabling it too early would block.
Change-Id: If85c64ba578991a1b112ceac7dd10276b58b0900
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Allow devicetree override to leave ac_loadline, dc_loadline and icc_max as default.
Test=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I715345d5ea83aed9ee929b2a4e13921c9d8895b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add new folder and basic drivers for Mediatek SoC 'MT8186'.
Difference of modules including in this patch between MT8186 and existing SoCs:
Timer:
Similar to MT8195, MT8186 uses v2 timer.
EMI/PLL/SPI:
Different from existing SoCs.
TEST=boot from SPI-NOR and show uart log on MT8186 EVB
BUG=b:200134633
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I579f79c15f4bf5e1daf6b35c70cfd00a985a0b81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58640
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some enum variables of timer v2 are the same between MT8195 and MT8186,
so we move them to common timer_v2.h.
TEST=emerge-cherry coreboot
BUG=b:200134633
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I89891a19e622aa24783025e73c38c4ffa43aa166
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58829
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCI_DEVICE_ID_AMD_FAM17H_LPC and PCI_DEVICE_ID_AMD_FAM17H_SMBUS redefine
the same values that are already defined by PCI_DEVICE_ID_AMD_CZ_LPC and
PCI_DEVICE_ID_AMD_CZ_SMBUS, so drop PCI_DEVICE_ID_AMD_FAM17H_LPC and
PCI_DEVICE_ID_AMD_FAM17H_SMBUS. Also add some comments to the places in
the code where the defines are used to clarify which ID is used on which
hardware generation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0b3d7b5a886ccc76d82ada6be4145e85fd51ede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change adds the cbfs_cache region into the x86 memlayout. The SoC
or mainboard can decide how big the region should be by specifying
CBFS_CACHE_SIZE.
BUG=b:179699789
TEST=Build guybrush and verify cbfs_cache region wasn't added.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I268b6bc10906932ee94f795684a28cfac247a68c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Addresses in AMD fw table with EFS gen2 are relative addresses, but
PSP doesn't accept relative addresses in update_psp_bios_dir().
Check for EFS gen2 and convert them as needed.
BUG=b:194263115
TEST=build and boot on guybrush and shuboz
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I95813beba7278480e6640599fcf7445923259361
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add DDR5 and LPDDR5 memory type checks while calculating bus width
extension (in bits).
Additionally, update all caller functions of
smbios_bus_width_to_spd_width() to pass `MemoryType` as argument.
Update `test_smbios_bus_width_to_spd_width()` to accommodate
different memory types.
Create new macro to fix incorrect bus width reporting
on platform with DDR5 and LPDDR5 memory.
With this code changes, on DDR5 system with 2 Ch per DIMM, 32 bit
primary bus width per Ch showed the Total width as:
Handle 0x000F, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0009
Error Information Handle: Not Provided
Total Width: 80 bits
Data Width: 64 bits
Size: 16 GB
...
BUG=b:194659789
Tested=On Alder Lake DDR5 RVP, SMBIOS type 17 shows expected `Total Width`.
Change-Id: I79ec64c9d522a34cb44b3f575725571823048380
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
CSE EOP will fail if the CSE is disabled (CB:52800)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic00fdb0d97fefac977c0878d1d5893d07d4481ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Modify print_me_fw_version to get ME firmware version by
calling it.
Tested=On a not yet to be public platform, verified the function
can get ME FW version successfully.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I50d472a413bcaaaa085955657bde6a0e6ec2c1db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make use of `smbios_bus_width_to_spd_width()` for filling DIMM info.
Additionally, ensures dimm_info_util.c file is getting compiled for
romstage.
TEST=dmidecode -t 17 output Total Width and Data Width as expected.
Change-Id: I7fdc19fadc576dec43e12f182fe088707e6654d9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PCI-SIG engineering change requirement provides the ACPI additions
for firmware latency optimization. This change adds additional ACPI DSM
function with both of FW_RESET_TIME and FW_D3HOT_TO_D0_TIME to the
USB4/TBT topology which has the same implementation on Tiger Lake in
commit I5a19118b75ed0a78b7436f2f90295c03928300d7.
BUG=b:199757442
TEST= It was validated that the first connected device waits only 50ms
instead of 100ms and all functions work on Alder Lake platform boards.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I0c8977c96de27ab0e554469eba658660975b8493
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The current check for XDCI enabled uses a static device path to an
internal PCI device at a very late point in the boot flow. At this
time the devicetree has been processed and disabled devices have been
already removed. If this device (00:15.1, XDCI) is disabled in
devicetree this will trigger the message
'BUG: check_xdci_enable requests hidden 00:15.1' in the log.
This looks weird and is wrong since it is not a bug to disable this
device when it is not needed.
To avoid this look up the devicetree by a tree walk instead of using
a static value for the devicetree.
Change-Id: If193be724299c4017e7e10142fac8db9fac44383
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The Intel icelake rvp boards actually rely on this but this failure
was hidden in a runtime error instead of a compile time error, due to
weakly linked functions.
Change-Id: Idbbe774efa1515ce1d34ce2ce8f87953300a3312
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58662
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify IPC sub command to 2 from 0 for reading LPM requirement from PMC.
Reference:
https://github.com/otcshare/CCG-ADL-Generic-Full
ClientOneSiliconPkg\Include\Register\PmcRegs.h
#define V_PMC_PWRM_IPC_SUBCMD_GEN_COMM_READ 2
It is consumed in below.
ClientOneSiliconPkg\IpBlock\Pmc\Library\PeiDxeSmmPmcLib\PmcLib.c
Change-Id: I58509f14f1e67472adda78e65c3a2e3ee9210765
Signed-off-by: Ethan Tsao <ethan.tsao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Since the iGPU PCI device IDs for AMD Renoir (family 17h, model 60h) and
Lucienne (family 17h, model 68h) are already defined in pci_ids.h, also
add them to the pci_device_ids list in the common AMD graphics support
block.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1c554d21eece182ecea7b09b45b7aa8a733425d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since all x86 CPUs in tree have MTRR support, there is no need to guard
the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs
have a display_mtrrs call at least somewhere in their code, so selecting
the DISPLAY_MTRRS option will always have an effect. All SoCs that don't
select RESET_VECTOR_IN_RAM have the postcar stage where it gets called.
The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver
which contains plenty of display_mtrrs calls.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The Intel Quark SoC does have a LAPIC on its x86 CPU core, so we should
select CPU_X86_LAPIC. This will additionally include the Makefile from
cpu/x86/lapic. Since none of AP_IN_SIPI_WAIT, LEGACY_SMP_INIT and
UDELAY_LAPIC gets selected, only the boot_cpu.c and lapic.c targets will
be added to the build. Since SMP isn't set, adding the boot_cpu.c target
won't change the resulting binary of a timeless build, since the only
function inside will be removed by the compiler's pre-processor in the
!SMP case. So the only thing that will change the resulting binary is
the addition of the lapic.c target. From this target only the function
cpu_get_lapic_addr will be used which overrides the weak implementation
in acpi/acpi.c. The call in arch/x86/mpspec.c can be ignored, since
GENERATE_MP_TABLE isn't selected. So this change will result in the
LAPIC address in the MADT being changed from 0 to to LAPIC_DEFAULT_BASE.
Since the documentation of the Quark SoC mentions that it has a LAPIC on
its one x86 core, this should work.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2f163bd608f0548abb0e8de90843d2a796b8ef6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Initialize the pad_cfg_lock_offset field for the various gpio
pad_community structures in the adl_communities.
BUG=b:201430600
TEST='emerge-brya coreboot' and verify it compiles successfully.
Change-Id: I2cd3e43a84b0140bb2aeae5de1e299db714d419b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update api name and comments to be more generic as spi destination
id is not DMI specific.
Update api name as soc_get_spi_psf_destination_id and comments.
And move PSF definition from pcr_ids.h as it's not pcr id.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie338d05649d23bddae5355dc6ce8440dfb183073
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Since all multi-core x86 CPUs need to have LAPICs, this option should be
selected for soc/example/min86.
TEST=The example/min86 mainboard still builds.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5aa6e850f0b4dca27309385ba889b04335fe4f0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
With using a Kconfig option to add the x86 LAPIC support code to the
build, there's no need for adding the corresponding directory to subdirs
in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added
(cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding
MTRR code selection patch and having verified that all platforms
added the MTRR code on that patch shows that soc/example/min86 and
soc/intel/quark are the only platforms that don't end up selecting the
LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y
which gets overridden to n in the Kconfig of the two SoCs mentioned
above.
Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
No SoC uses the ramstage-only x86_enable_cache helper function to call
enable_cache with some added port 0x80 and console output.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I7c5039e1341fd4089078ad7ffb2fe6584a94045c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This change is required as part of HECI Interface initialization in order
to put the host and CSE into a known good state for communication. Please
refer ME BIOS specification for more details. The change adds HECI
interface reset flow in the CSE driver. It enables coreboot to send HECI
commands before DRAM Init.
BUG=b:175516533
TEST=Run 50 cold reset cycles on Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ie078beaa33c6a35ae8f5f460d4354766aa710fba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
MBP Hob is being generated by FSP after getting data from ME.
coreboot does not consume this HOB and FSP provides an option
for bootloader to skip generation of MBP HOB. This will help in
saving ~14 ms of boot time.
Here is the data from Brya P1 Board:
Before: 955 returning from FspSiliconInit 879,432 (99,156)
After: 955 returning from FspSiliconInit 1,177,513 (84,506)
BUG=b:188577893
BRANCH=None
TEST=No functional impact on Brya system and boot time is reduced
with this patch.
Change-Id: Ibb64e4d0f4ae7212defb6704b05a78e754f75cd7
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58289
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the verstage_x86 class for the spi_dma.c target instead of using the
verstage class and guarding it with !VBOOT_STARTS_BEFORE_BOOTBLOCK.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9b8cafd1ef17df8c485f6594bc0928cea88e436b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is
no need to include it in the Makefile of a CPU or SoC, so remove it from
those Makefiles.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
All x86-based CPUs and SoCs in the coreboot tree end up including the
Makefile in cpu/x86/mtrr, so include this directly in the Makefile in
cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new
x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is
selected be default could be added and the new CPU/SoC without MTRR
support can override this option that then will be used in the Makefile
to guard adding the Makefile from the cpu/x86/mtrr sub-directory.
In cpu/intel all models except model 2065X and 206AX are selcted by a
socket and rely on the socket's Makefile.inc to add x86/mtrr to the
subdirs, so those models don't add x86/mtrr themselves. The Intel
Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the
subdirs. The Intel Xeon SP SoC directory contains two sub-folders for
different versions or generations which both add x86/mtrr to the subdirs
in their Makefiles.
Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch fixes regression introduced by commit bee4bb5f0
(soc/intel/common/cse: Late sending EOP msg if !HECI_DISABLE_USING_SMM)
FAFT test case fail when doing `firmware_DevMode` test.
If CSE is already hidden then accessing CSE registers would be wrong
and will receive junk, hence, return as CSE is already disabled.
BUG=b:203061531
TEST=Brya system can boot to OS with recovery mode.
Change-Id: I2046eb19716c397a066c2c41e1b027a256bd6cf9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
After adding code to handle the case of missing the link/bus on the CPU
cluster device in mp_cpu_bus_init, there's no need to have the LAPIC
device in the devicetree any more.
TEST=Mandolin still boots successfully.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icfc4fb61b373129f3bf4f4de09c38076a8f66733
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
After adding the functionality to add a bus/link on the CPU cluster
device in mp_cpu_bus_init if it is missing due to no LAPIC device being
present in the devicetree below the CPU cluster device, we can use
mp_cpu_bus_init as init function in cpu_bus_ops and implement
mp_init_cpus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I76aebeca1b3227cfd310b6c45f506c042b35ae04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Since PSE devices could be initialized as either host owned
(PCI devices) or PSE owned (will be hidden from coreboot and
only visible to PSE interface), add all PSE devices in PCI
list header file for future usage.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Iaa40cdcb021d05e50504dd85f94e9c021e284d00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58466
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For coreboot proper, I/O APIC programming is not really required,
except for the APIC ID field. We generally do not guard the related
set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC).
In practice it's something one cannot leave unselected, but maintain
the Kconfig for the time being.
Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This adds delivery of PIC/i8259 interrupts via ExtNMI on the
affected platfoms.
Change-Id: If99e321fd9b153101d71e1b995b43dba48d8763f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The number of redirection table entries (aka interrupt vectors) inside
an I/O APIC may depend of the SKU, with the related register being of
type read/write-once. Provide support utilities to either lock or set
this registers value.
Change-Id: I8da869ba390dd821b43032e4ccbc9291c39e6bab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Implement mp_init_cpus and use mp_cpu_bus_init as init function in
cpu_bus_ops.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2adcb1e1d79ced804925c81095cc5c0c2e6f9948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
