Instead of sprinkling the pad configuration and pinmux
selection throughout the code allow for a data-driven
initialization sequence. Most of the calls in the
original pinmux functions require 12 bytes per pad
plus the support code. This implementation allows for
4 bytes per pad in addition to the support code.
BUG=chrome-os-partner:29981
TEST=Built and booted into depthcharge on rush.
Change-Id: I22c243a5f9891a97e14b78d8c8064e36adaf50b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9329c17bbadcaab803b38842e38e1704d262817d
Original-Change-Id: I3a119b4068e880b74a0a1597f143d7c4e108a6c1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210833
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8875
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change syncs the i2c driver with the one in depthcharge.
BUG=None
TEST=Booted Veyron Pinky
BRANCH=None
Change-Id: Ic9c7006770bba50fd412e0bcefc52f879b7195ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Id: 95ca6c88061062c0de95a8dd3567a71a372771b0
Original-Change-Id: I0d0fdefa58c5b4cc5c991be40796a800ccf074a5
Original-Reviewed-on: https://chromium-review.googlesource.com/218873
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8872
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The Rk808 PMIC is a part that will probably be used by most Rk3288
boards, so it makes sense to keep it as common code in the the SoC
directory. This patch puts LDO control functions into rk3288/rk808.c, so
that the mainboard only has to call a simple interface to set up the
specific LDOs it requires.
BUG=chrome-os-partner:30167
TEST=Booted both this and the old version with a stubbed-out
i2c_writeb(), ensured that the final values are the same.
Change-Id: I7efa60f8a357ce6be7490e64d2e0e3f72ad16f1c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4df22cd78ee04fefc6f7fa0e5c3d903eb1794422
Original-Change-Id: Ic172f9c402e829995f049726d3cb6dbd637039d1
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217598
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8871
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This patch adds code to read the board ID from Pinky and put it into the
coreboot table.
(Note: This implementation differs slightly from Tegra since it pinmuxes
the GPIOs inside board_id(). That means the pinmuxing might be set more
than once if called in multiple stages, which is perfectly harmless and
in my opinion cleaner than having to (remember to) do it manually in one
of the per-stage files.)
BUG=chrome-os-partner:30167
TEST=With depthcharge patch, select -rev1 device tree for board ID 0.
Change-Id: I265fafcb176a31a46f7792ecf352f1671be7dd41
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9da10ce8b62ec98243fc7c82544b3004316799a8
Original-Change-Id: I5b5689373e1e47b1e0944b5fe5f2e70a285b931f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217675
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
We retroactively decided to use the variant name "pinky" for the Rk3288
board we're currently bringing up, and retcon the unadorned "veyron"
name to refer to the Rockchip evaluation board. Since we currently have
no interest to maintain coreboot support for that board in our tree,
let's rename everything to "veyron_pinky" and forget about "veyron".
CQ-DEPEND=CL:217592
BUG=chrome-os-partner:30167
TEST='emerge-veyron libpayload coreboot' fails but
'emerge-veyron_pinky libpayload coreboot' succeeds.
Change-Id: I88bf5cc2da7c2f969ea184b5f12affaa94045a06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aa8ec24b63d11798fec1993091b113a0c0938c7a
Original-Change-Id: I366391efc8e0a7c610584b50cea331a0164da6f3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217674
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8869
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some files for the veyron project were checked in with execute
permissions where it doesn't make sense. Fix.
BUG=chrome-os-partner:30167
TEST=None
Change-Id: I2a96816d4fd0af3949b0adaf5208fd2862835b5b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d7a408ff273d848b60aaad4f8b27103318e56111
Original-Change-Id: Ia3788abf3755baf028518efb975701cf6cb37e46
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217673
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8868
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Supports DDR3 and LPDDR3.Supports dual channel.ddr max freq is 533mhz.
ddr timing config file in src\mainboard\google\veyron\sdram_inf
Remove dpll init in rk clk_init(), add rkclk_configure_ddr(unsigned int hz).
BUG=chrome-os-partner:29778
TEST=Build coreboot
Change-Id: I429eb0b8c365c6285fb6cfef008b41776cc9c2d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 52838c68fe6963285c974af5dc5837e819efc321
Original-Change-Id: I6ddfe30b8585002b45060fe998c9238cbb611c05
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209465
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8865
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
BUG=chrome-os-partner:29778
TEST=Build coreboot
Change-Id: I23af280764eb28d3f6b215ab32553fe42ee73272
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: abf5c14c8b32573107d2a1c73a752e740264db7e
Original-Change-Id: I46257cc71cc3cd1e867edf589ddf09f7990d6784
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209462
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8863
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
BUG=chrome-os-partner:29778
TEST=Build coreboot
Change-Id: I74b30ecfe40c039855b835db0dfd0cd25adf960e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a30378a3152c930029a5b170cc6bf46180b5c7b8
Original-Change-Id: I5105e5277b8072c06bb41b39479373697ef81c67
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209468
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8860
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
In order to display a "update in progress" screen on devices with
a slow EC or PD chip it may be necessary to also load the VGA
Option ROM when doing EC software sync.
This adds config options for VBOOT_EC_SLOW_UPDATE which simply sets
a flag in the input parameters that is already handled by vboot.
It also adds a config option for VBOOT_OPROM_MATTERS which is a bit
more tricky in that it sets a flag in input parameters, but also
needs to keep track of the option rom being loaded and pass that
flag into VbInit as well.
Since VbInit will clear the NV bit for option rom loaded the check
that is done in vboot_wants_oprom() needs to first compare against
the vboot handoff copy of the input flags.
BUG=chrome-os-partner:32379
BRANCH=samus
TEST=manual testing:
1) in normal mode, with EC/PD in RW, ensure that they are rebooted
to RO and the VGA Option ROM is loaded and the wait screen is
displayed, and then the system is rebooted at the end and the
VGA Option ROM is not loaded.
2) same as #1 with EC/PD in RO already, same result
3) same as #1 with system in developer mode, same result except
there is no reboot at the end of software sync
4) same as #1 with system in developer mode and EC/PD in RO,
ensure that there is no extra reboot at the beginning or end of
software sync.
Original-Change-Id: Ic2b34bf9e7c6cc5498413fa1b8dff6e6207c9d0a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223831
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 7d7aa89238efb5081885f9386c8e872fc96f573f)
Change-Id: Ib7fb24e6e80e1f7e836bc62246ab9b3e056fd73d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8887
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
this change makes coreboot initialize kernel space and backup space in the tpm
when no firmware space is found in the tpm.
BUG=chrome-os-partner:32410
TEST=Forced factory initialization and verified it went through without errors.
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I777e3cb7004870c769163827543c83665d3732b9
Original-Reviewed-on: https://chromium-review.googlesource.com/220412
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit d8c0c407bf0fed60d76441ada7bedd36f6fc3a38)
Change-Id: Icc3779125262b4499e47781991ebbf584abf074a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change makes prevent execution from falling through to unverified
code when hard_reset is not implemented. it also includes a few touch-ups.
BUG=None
TEST=Booted Veyron Pinky. Verified firmware selection in the log.
BRANCH=None
Original-Change-Id: I9b02ab766172a62c98b434c29f310bc4a44f342d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219625
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit d1f5207d83d2247b55f2bb9d02ac843305fc3ded)
Change-Id: I99dd5a2ca3a5369accb14408ea9d266bf60e7132
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With CONFIG_RETURN_FROM_VERSTAGE false, the verstage loads the romstage over
the bootblock, then exits to the romstage. this is necessary for some SOC
(e.g. tegra124) which runs the bootblock on a different architecture.
With CONFIG_RETURN_FROM_VERSTAGE true, the verstage returns to the bootblock.
Then, the bootblock loads the romstage over the verstage and exits to the
romstage. this is probably necessary for some SOC (e.g. rockchip) which does not
have SRAM big enough to fit the verstage and the romstage at the same time.
BUG=none
TEST=Built Blaze with USE=+/-vboot2. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I673945c5e21afc800d523fbb25d49fdc83693544
Original-Reviewed-on: https://chromium-review.googlesource.com/212365
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: This purposefully is probably broken in vendorcode/google/chromeos
as I'm just trying to set a base for dropping more patches in. The vboot
paths will have to change from how they are currently constructed.
(cherry picked from commit 4fa17395113d86445660091413ecb005485f8014)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9117434ce99695f9b7021a06196d864f180df5c9
Reviewed-on: http://review.coreboot.org/8881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change reduces the code duplication of the bootblock and the romstages for
Nyans.
BUG=none
TEST=Built Nyan, Big, and Blaze. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: dnojiri@chromium.org (Daisuke Nojiri)
Original-Change-Id: Ieb9dac3b061a2cf46c63afb2f31eb67ab391ea1a
Original-Reviewed-on: https://chromium-review.googlesource.com/214050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit f3413d39458f03895fe4963a41285f71d81bcf5f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I912f63b12321aa26a7add302fc8a6c4e607330ef
Reviewed-on: http://review.coreboot.org/8880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This introduces a new kconfig variable to select the VBNV backing
store explicitly instead of inferring it from CPU/SoC architecture.
x86 platforms have historically relied only on CMOS to store VBNV
variables, while ARM-based platforms have traditionally relied on
the EC. Neither of those solutions are going to scale well into
the future if/when CMOS disappears and we make ARM-based systems
without an EC.
BUG=chrome-os-partner:29546
BRANCH=none
TEST=compiled for nyan_blaze and samus
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I4a8dadfb6bb666baf1ed4bec98b29c145dc4a1e7
Original-Reviewed-on: https://chromium-review.googlesource.com/213877
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit d088fc71b2e2b45e826d3dedb8e536ad58b8d296)
Change-Id: Iea325a8c4d07055143e993d89b827f86b8312330
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
rmodules ccopts contain information about specific arch like armv4,v7. Hence, it
is important to include them in VBOOT_CFLAGS
BUG=None
BRANCH=None
TEST=Compiles correctly for armv4 in rush
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id:
Original-Change-Id: I8f5509f753e28046678c3782d6f0b6210559f798
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209979
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit ca9f2f86ff1bc445abf5f97f61c04b6eccbd3e25)
Change-Id: I6cd7c47f33cf897d8ee96e7154222b3bfbe5221f
Reviewed-on: http://review.coreboot.org/8775
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to more cleanly apply upcoming changes some files
will need to do a dance.
Change-Id: Ib50670743c10221785447490190ecdbff8c764fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8654
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This code ports antirollback module and tpm library from platform/vboot_reference.
names are modified to conform to coreboot's style.
The rollback_index module is split in a bottom half and top half. The top half
contains generic code which hides the underlying storage implementation.
The bottom half implements the storage abstraction.
With this change, the bottom half is moved to coreboot, while the top half stays
in vboot_reference.
TEST=Built with USE=+/-vboot2 for Blaze. Built Samus, Link.
BUG=none
Branch=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I77e3ae1a029e09d3cdefe8fd297a3b432bbb9e9e
Original-Reviewed-on: https://chromium-review.googlesource.com/206065
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
(cherry picked from commit 6b66140ac979a991237bf1fe25e0a55244a406d0)
Change-Id: Ia3b8f27d6b1c2055e898ce716c4a93782792599c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8615
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
These boards are supposed to be able to determine the board ID at run
time based on GPIO settings.
BUG=chrome-os-partner:30489
TEST=verified that all boards build. Checked that storm proto0 reports
board ID of 0 on the console
Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210119
(cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733
Reviewed-on: http://review.coreboot.org/8722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
storm uses three GPIOs in tertiary mode, such that proto0 returns
value of 8 when the GPIOs are interpreted as a single tertiary number.
Adjust the calculated value to return board ID of 0 on proto0, and
monotonously incrementing values on newer boards.
BUG=chrome-os-partner:30489
TEST=when enabled, the board ID value of zero is reported on the console.
Original-Change-Id: I2ff8fd5cbc8d568877b6f8bf220e146893f1e4be
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210118
(cherry picked from commit 6ba24f31583933f02be111c8767ae9df56537011)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I35ee218df35a0924d4bb8fcbc6c875450a609f24
Reviewed-on: http://review.coreboot.org/8721
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For the majority of Chrome OS boards there is no need to include board
ID calculation in any stage but ramstage, where the ID should be
available for inclusion into the coreboot table.
BUG=chrome-os-partner:30489
TEST=build only, no other tests yet
Change-Id: I1451d52382bc48cc126d40267e0f61712f4a6d4b
Original-Change-Id: Ib9c06698a399d31e79a9b14143343ba2ad46d0fb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210117
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 27dd40e85bfcd0a38f388bad4d79f5fbb77a7566)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Board ID value is usually of interest to bootloaders. Instead of
duplicating the board ID discovery code in different bootloaders let's
determine it in coreboot and publish it through coreboot table, when
configured.
BUG=chrome-os-partner:30489
TEST=none yet
Change-Id: Ia1e36b907ac15b0aafce0711f827cb83622e27bb
Original-Change-Id: Iee247c44a1c91dbcedcc9058e8742c75ff951f43
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210116
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit b2057a02db9391e2085b138eea843e6bb09d3ea2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8719
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add implementation of the GPIO API defined in src/include/gpiolib.h.
Also, clean up the GPIO driver, make it use pointers instead of
integers for register address.
This requires a touch in the SPI driver, where the CS GPIO is toggled
and in the board function where it enables USB interface.
BUG=chrome-os-partner:30489
TEST=tested with the following patches, observed proto0 properly read
the board ID.
Original-Change-Id: I0962947c6bb32a854ca300752d259a48e9e7b4eb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210115
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e951f735001509d135cc61530ed0eecb5fc31a85)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8a612dce000931835054086c1b02ebfc43dc57d2
Reviewed-on: http://review.coreboot.org/8718
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Some platforms use tertiary interpretation of GPIO input state to
increase number of distinct values represented by a limited number of
GPIOs. The three states are
- external pull down (interpreted as 0)
- external pull up (1)
- not connected (2)
This has been required by Nvidia devices so far, but Exynos and
Ipq8086 platforms need this too.
This patch moves the function reading the tertiary state into the
library and exposes the necessary GPIO API functions in a new include
file. The functions are still supposed to be provided by platform
specific modules.
The function interpreting the GPIO states has been modified to allow
to interpret the state either as a true tertiary number or as a set
two bit fields.
Since linker garbage collection is not happening when building x86
targets, a new configuration option is being added to include the new
module only when needed.
BUG=chrome-os-partner:30489
TEST=verified that nyan_big still reports proper revision ID.
Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d
Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209673
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8717
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bootblock stack on Danube should be SRAM and defined separately from
the rest of the coreboot stack. The actual coreboot stack will be
defined later.
The top of the stack should be above the bottom, as the stack grows
towards lower addresses.
BUG=chrome-os-partner:31438
TEST=ran bootblock on simulator under codescape, observed stack
properly initialized.
Change-Id: I43d2bae5f85a09a95ca0103b253399bd92555aef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e02724cb4b30990ebaa631dabb45917af29d6437
Original-Change-Id: I3c37c8b5a1c0e7fd19411558a8f6d899fc283191
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218732
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8767
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add basic board support for the ImgTec Danube Virtual Platform, which
emulates a system built around the Danube SoC.
Run this by loading coreboot.bimg into a flash device connected to SPFI1
chip select 0 & then executing the Danube boot ROM.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: Ia62af62804bab261f3cabf7c2e62f5bb08a4a1a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6cb1017f5e2fec85f7f5c60cd2cfec63cc886b49
Original-Change-Id: I7a2b52f304bcb4b614440ec38975e05f38b0e590
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207976
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Actual timer support is not yet available for Danube, it will be added
soon. For now, just to make the target build, modify it to use
GENERIC_UDELAY and HAVE_MONOTONIC_TIMER configuration option.
BUG=none
TEST=the target builds again
Change-Id: Iad1ceb966d5dbc8687b966be4d2506c8f92eba5a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 261837539fb5a31f96e682edbcbbbc0e588f2750
Original-Change-Id: Ie3289eace9d2baadd01bd641b5dffc635ac80c0f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220395
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8765
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Romstage initialization code does not need to be board specific, keep
it in the SOC directory. Should there be a need for the board specific
code, it can be added later.
BUG=chrome-os-partner:31438
TEST=with upcoming patches, the urara board coreboot builds fine
Change-Id: Ib619fa9313d463ded13e9259e50bb5aeaab4fb05
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c08977aaa5e9b5da29359d1920d7d8b61ce86d3
Original-Change-Id: I27e2d225bd36c42ccd29128d0ea9a970566c02af
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8764
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Iniitialize I2C bus required for TPM operation. Problem observed was that if
frequency is raised above 20KHz, TPM starts responding with NAKs either for
address or for data. Need to look into that.
BUG=None
BRANCH=None
TEST=Compiles successfully and TPM success messages seen while booting.
Original-Change-Id: I9e1b4958d2ec010e31179df12a099277e6ce09e0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210001
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 01e87ae35431147f442e3f3e531537b8f0de1c9d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7dddc39d77f9a726fa51dd58ea9b7712c9a6fae2
Reviewed-on: http://review.coreboot.org/8715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enable L1 Sub-State when both root port and endpoint support it.
[pg: keyed the feature to MMCONF_SUPPORT, otherwise boards
without that capability fail to build.]
Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092
Original-BUG=chrome-os-partner:31424
Original-TEST=Build a image and run on Samus proto boards to check if the
settings are applied correctly. I just only have proto boards and
need someone having EVT boards to confirm the settings.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a
Original-Reviewed-on: https://chromium-review.googlesource.com/221436
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was an empty udelay() implementation result in 0 waits.
Provide an actual implementation.
BUG=None
BRANCH=None
TEST=Built and ran through to depthcharge on rush.
Change-Id: Ia7060566a71c36bb7e4543c2fe4ee49d168518c7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c8832e73de238358ea801ccd7c2330de35a7b40e
Original-Change-Id: I201f2fdc4e4f5c88d48e4002839b03e808a5a1bc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210827
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of using rela_time use the stopwatch API as the
semantics fit perfectly with the expiration usage.
BUG=None
BRANCH=None
TEST=Built, but similar usage tested on tegra132.
Change-Id: I1147f2bed84b93d1b776205df9ae04d1db9c98a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c38e054dd166d5eb53f692833b5ce88a230816e3
Original-Change-Id: I6d3f3da4e035e872890d8b67947b17a981673dba
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8819
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of open coding the monotonic timers use the stopwatch
abstraction.
BUG=None
BRANCH=None
TEST=Booted and noted timings work as expected. Built with software_i2c
and no compilation failures.
Change-Id: Ie5ecdd5bc764c1ab8ba4a923e65a1666aacd22f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7bffb5aeb41e9b88cd2c99edd6abc38f1dc90af
Original-Change-Id: I0170fe4b93d9976957a2dcb00a6ea41ddc0320ce
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219495
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8817
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Simplify the SPI timeout by using the stopwatch.
BUG=None
BRANCH=None
TEST=Built nyan. Confirmed stopwatch works independently.
Change-Id: Ida26a0748d4b5a6a28aa8f6e2b92fe2ee4cbe17f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 900d7ac826b76d49290033c87849bf776684f2c1
Original-Change-Id: I84b7949060326b7c6cc1872420b93bd44604c4d3
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219493
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8816
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's a lot of places where expiration and running time are
open coded. Allow for those places to be simplified by adding
a stopwatch construct. The stopwatch can have an expiration or
just be used to accumulate time.
BUG=None
TEST=Built and verified API works as expected by using implementation.
Change-Id: Ibd636542b16d8554f1ff4512319a53dce81c97e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc623a1b36eb08c5877591c4509cd61131c62617
Original-Change-Id: I53604900fea7d46beeccc17f1dc7900d5f28518b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219492
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8815
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These modules are necessary to resolve external names when building
the board image. These are just skeletons for now which will be filled
later.
BUG=chrome-os-partner:31438
TEST=when config is enabled, emerge-urara coreboot succeeds. more
extensive testing to come later
Change-Id: I0fcb5d33187172ecac77041425402b33e89e8944
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94ec79b0ab872f5c5fe7db5bef5fdabf77d6b3b6
Original-Change-Id: I69cc178976a910ebf8031ed9ac9ad67b4cc0878a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215678
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add build infrastructure and basic support code for the ImgTec Danube
SoC. This support is sufficient to run on a simulator.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: I59e36589765bf06b075fd4850215a0ef71246bb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 881278d7fbb8e6803bc8f6f9e84c64640b097401
Original-Change-Id: Ia7ed7288b13085db7ff37b5ad75d978b6137f958
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8762
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With the proper configuration flags enabled, do_printk is available
from src/console, no need to define it elsewhere.
BUG=chrome-os-partner:31438
TEST=with upcoming patches, the urara board coreboot builds fine
Change-Id: I82071b4ca1686639c0bd39c63a06b61cb5bf5571
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 69c655537c50274a61cf123b7fc387ec60dd29c7
Original-Change-Id: Ib1e3e5750cdc1adc509b4580a4f24d3ff3b105ee
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215862
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8761
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the build infrastructure and basic architectural support required
to build for targets using the MIPS architecture. This is sufficient
to run on a simulator, but will require the addition of some cache
maintenance and timer setup in order to run on real hardware.
BUG=chrome-os-partner:31438, chromium:409082
TEST=none yet
Change-Id: I027902d8408e419b626d0aab7768bc564bd49047
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcc0d934d7223922c878b1f87021cb5c2d7e6f21
Original-Change-Id: If4f99554463bd3760fc142477440326fd16c67cc
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207972
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8760
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As MIPS toolchain does not provide adequate support for 64 bit
division and shift operations, the missing functions are required to
be provided by the user.
This patch brings in the Linux implementation of the 64 bit arithmetic
shift borrowed from arch/mips/lib/ashldi3.c (eg. Linux v3.14).
BUG=chromium:406038
TEST=With the upcoming patches coreboot successfully builds for MIPS
targets in chroot (coming later).
Change-Id: I2168f69352a9b9e3c5d197489f701a442e65703c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8ec616161be8ad3aeb6494e7121615e3329b414d
Original-Change-Id: Ia1ccb29d4c9f3c95e04e06f6af7ce8a00e2e7455
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214156
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8759
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Certain boards need to speak proto v3 over i2c. Leverage the
transport agnostic API to share the logic with other proto v3
impelementations.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=Built and ran on ryu. Can talk to the EC successfully.
Change-Id: I1d0cd6907057af4ded3c4460193bbe1d897a1db7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cb9ac965ad04c9491f40fd9aa595176a28a467b3
Original-Change-Id: Ib699120fd232392e8caa0889c2bf40f4587a8a35
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211139
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Depending on the transport mechanism for proto v3 different bytes
need to be send and/or read before the request and response. Depending
on the software and/or controller interface that requirement leads to
needing to copy data into temporary buffers. Avoid this by allowing
the transport mechanism to provide the request and response
buffers.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=Built for rush and ryu. Ran on ryu with i2c implementation.
Also built for rambi to check x86 systems.
Change-Id: I35d4d69bd1fa900fc0cfe3822496f381405bdcb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7224426e1d0bcf06ed010131a2462a6ca201d8b
Original-Change-Id: Iad6cce566a253ca72e6f5009a97235ece0a6c1b5
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211138
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8827
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The EC doesn't return any data when one performs a write to
VBNV context. Therefore there is a mismatch of expectations.
Correct this by properly setting the expected response length.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=No longer hanging while writing to VBNV on ryu.
Change-Id: I7077a507c3280358dac1f88ece62cacee9b71bea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1735c3377163aeb9e90155cb9f081a1eea919c9
Original-Change-Id: I455724f20f5442bd62a792f09273227417475f07
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211137
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8826
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's helpful to view program size by inspecting the symbols.
_start and _end exist on romstage and ramstage. In order to
be consistent add _end for bootblock too.
BUG=None
BRANCH=None
TEST=Built and noted bootblock has _end symbol.
Change-Id: I06634b317e957e8271bf32530a56b5541c79b9ee
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b4ac926b30749d22e90a6f12ebac52107e241526
Original-Change-Id: I7f0b4dd4078c7d23c70949563b4c3f4df9e66142
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210832
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8824
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In some cases, we need to use 1 common VGA device ID to share
among different VGA devices.
But it will show error when it can't find a specific pci rom
by PCI DID.
in fact, it will find the pci rom with common vga ID.
Without this commit, you may need to skip error check during
suspend_stress_test
BUG=none
BRANCH=none
TEST=build OK, and check no error on Auron and Samus
Change-Id: I2b18347e46c831038f048cfd0b065430c72c6f30
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c32ee21b4c942182e5ffb21b58b93fa7c082223
Original-Change-Id: Ib743e960f772b7e2e73a1feb80790a13bd8c06c7
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217415
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-on: http://review.coreboot.org/8821
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It causes fan top speed due to this bug + our board-specific workaround,
and causes invalid temperature sensor readings.
Therefore, re-configure the register "External Temperature Sensor Host
Control Register" to terminate processes when this issue happens.
BUG=chromium:402204
TEST=ran suspend_stress_test 500 times
Change-Id: I439d5de798fbe999e4eec5497e6969b7b453121b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b82f2922c7fce3ca6b2797a8d9775e9db2817fe9
Original-Change-Id: I6e71b6a46a31b00e541c304f1ed58c1678c1d42e
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219445
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/8820
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When adding gargabe collection to x86 the --gc-sections
flags was inadvertently missed when linking romstage_null.debug.
Fix this omission.
Change-Id: I7d2700755afa78459c6f8707303a0e64936a1a9f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8850
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Instead of sprinkling the cbfs calls around (as well as getting
return values incorrect) use the common run_romstage() to perform
the necessary work to load and run romstage.
Change-Id: Id59f47febf5122cb3ee60f9741cfb58cb60ccab5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8711
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of sprinkling the cbfs calls around (as well as getting
return values incorrect) use the common run_ramstage() to perform
the necessary work to load and run ramstage.
Change-Id: I37b1e94be36ef7a43efe65b2db110742fa105169
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8710
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide a common run_romstage() function to be used by
bootblocks to load and run romstage. This is similar to
run_ramstage() in that it provides a single entry point
for doing the necessary work of loading and running romstage.
Change-Id: Ia9643cc091f97a836cf5caefdff8df4a3443df4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8709
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Miraculously a console is being compiled in for romstage.
However, as no calls were potentially printing to the preram
console this was being ignored. Instead provide the symbol
required so as not to fail the build.
Change-Id: Id8f0b6e6d15b41fa7fe1b63bf2d91f15baa0edda
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8712
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of two headers for payload and ramstage loading
combine the 2 files into one. This also allows for easier
refactoring by keeping header files consistent.
Change-Id: I4a6dffb78ad84c78e6e96c886d361413f9b4a17d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8708
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Vboot2 targets so far did not have COMMON_CBFS_SPI_WRAPPER
configuration option enabled, so the verstage is missing the relevant
files in some Makefiles. This patch fixes the problem.
BRANCH=none
BUG=none
TEST=with the rest of the patches applied cosmos target builds fine
with COMMON_CBFS_SPI_WRAPPER enabled
Change-Id: I3ce78c8afc5f7d8ce822bbf8dd789c0c2ba4b99c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b72693c96f7d8ce94ce6fe12b316d5b88fded579
Original-Change-Id: Iab813b9f5b0156c45b007fe175500ef0de50e65c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223751
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8772
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
GD25LQ64C and GD25LB64C have the same ID and settings.
BUG=chrome-os-partner:25907
BRANCH=baytrail
TEST=Boot with GD25LQ64 and check MRC data save/restore works.
Change-Id: I8a4aa7cabd9a7657c2f0bae255a87341db3f1061
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20b5896adbbbdedcb1b7de435466dcc6bfa703cb
Original-Change-Id: I86d1e69552b6000faa9e0523356e27d7e2a6a6db
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193238
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8770
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This allows us to use the driver before ramstage.
BRANCH=none
BUG=none
TEST=built and booted on Pinky
Change-Id: I0700388b0e4e0562e3c0a52863c8357097bfd8d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd57587dab74de509d5c50cfc1ad337d765af6c8
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I0ce901331e401274254b8889484ffb41359119fa
Original-Reviewed-on: https://chromium-review.googlesource.com/235864
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8774
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When the driver is included in bootblock, malloc() is not available.
Come to think of it, it is perfectly fine to use a statically
allocated structure for the SPI device descriptor - coreboot is
unlikely to require concurrent support of multiple SPI devices of the
same kind.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=bootblock on the FPGA board recognizes the installed Winbond
device:
coreboot-4.0 bootblock Tue Nov 11 07:27:24 PST 2014 starting...
SF: Detected W25Q16 with page size 1000, total 200000
Change-Id: Iea1936a219d38848580a10f75eb8bbcab17e6507
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b4082442aa526d387a80cb5872d78670e6b468b
Original-Change-Id: Iaa69d610ef18e69b1ae5ade2d958f9fe1595a723
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228959
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8771
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
S25FL116K family uses the first 3 bytes in response to a legacy identification
command (9f) while previously supported models use the last 4 bytes. This change
defines identify functions to allow both types to be handled correctly.
BUG=none
BRANCH=tot
TEST=verified romstage is loaded on cosmos development board.
Change-Id: I1970a9af17e81299fada5029724d405de4022156
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65ff436db2355cb68a766a3dedbcd7e2f765e6db
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Icdd2645e356652672c4482e7b805da1bc0f21e71
Original-Reviewed-on: https://chromium-review.googlesource.com/234431
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a macro to check if a value is aligned.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: I0680954eb1b1964a631527f96aa0570a32944fa1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f1717648e0a4b54217d71f8d0a15d496737d156
Original-Change-Id: Ie0bc1374918a7ffaaec5fea62c1193a42edd416c
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246692
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8757
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
mainboards/amd/fam10: Initialize cbmem area after raminit
When GFXUMA is enabled, CBMEM is placed at TOM - UMASIZE
When GFXUMA is disabled, CBMEM is placed at TOM
This matches the behaviour present before conversion to early
CBMEM.
The CBMEM location code implicitly assumes TOM does not change
between romstage and ramstage. TOM is set by romstage raminit,
and is never changed by romstage or ramstage afterward. As
the CBMEM location is positioned at a specific offset from TOM
that is known to both romstage and ramstage early CBMEM is safe
on Fam10h systems.
TEST: Booted ASUS KFSN4-DRE and verified both cbmem timestamp
tables from romstage and cbmem log tables from ramstage.
Change-Id: Idf9e0245fe91185696ff664b06182c26b376c196
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8489
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Our target is to get rid of backup_top_of_ram() and get_top_of_ram()
entirely so only declare these with LATE_CBMEM_INIT=y.
Change-Id: I54f549fe774996f4d803f9ec527e0fac46f6576f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8749
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
The CBMEM memory segment is always placed at TOM - UMASIZE when GFXUMA
is enabled, however when GFXUMA is disabled an attempt was made to locate
the CBMEM memory segment above the I/O hole in certain rare cases.
Removing this special case does not impact functionality, and paves
the way for early CBMEM support.
Change-Id: I98d29ab9d601a4e20f58e2cd0a66abb13b494e74
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8664
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The AMD RS780 early initialization code originally used the
CF8/CFC I/O method for PCI configuration space access. After
the default configuration access method was changed to MMIO
(http://review.coreboot.org/#q,aad07472), booting would hang
at "PCI: pci_scan_bus for bus 01". Fix the problem by changing
function rs780_nb_gfx_dev_table() so that it no longer borrows
the BAR3 address needed for PCIe MMIO config usage.
Change-Id: I8816b94c848e1b50f8c880e5867a96ca2a33a8a7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8394
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The GCC 4.9.2 update showed that the boot_state_init_entry
structures were being padded and assumed to be aligned in to an
increased size. The bootstate scheduler for static entries,
boot_state_schedule_static_entries(), was then calculating the
wrong values within the array. To fix this just use a pointer to
the boot_state_init_entry structure that needs to be scheduled.
In addition to the previous issue noted above, the .bs_init
section was sitting in the read only portion of the image while
the fields within it need to be writable. Also, the
boot_state_schedule_static_entries() was using symbol comparison
to terminate a loop which in C can lead the compiler to always
evaluate the loop at least once since the language spec indicates
no 2 symbols can be the same value.
Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8699
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
SERIRQ_CONTINUOUS_MODE is specific feature of LPC busses.
This fixes a KCONFIG unmet dependency warning on ARM mainboards with
chromeec.
Change-Id: Iae61986219585dcb1124cf3b24fa32a8596d56c8
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8665
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add license header with copyright of the original authors.
Change-Id: I8c55bb38a2a2a387ad2461e11d402c7392fa2497
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8691
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The decode of UART addresses down to the LPC bus needs
to occur early to allow romstage console messages to
be seen. This enables the decode of most of the I/O
ports typically seen in a system.
Change-Id: I6636946af4ad5320a5a46c2920b4f06345b5f806
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8661
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The current spi_xfer() function sets the count in hardware and then
loops while waiting for the requested number of bytes to be sent or
received. However, the number of bytes to be transferred may exceed
the maximum count that can be programmed into the controller.
This patch re-factors spi_xfer() to split the low-level FIFO handling
portions for transmit/receive into their own functions to be called
by loops in spi_xfer() which will break large transfers into smaller
ones.
BUG=chrome-os-partner:30904
BRANCH=storm
TEST=built and booted with a >64KB payload on Storm
Original-Change-Id: I70743487996cf08cfc602449f2181a7fcd99bfa4
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209838
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Tested-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit 5ec28de11f12c2438356f45ce978a17fbb603bf7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0033e0dd96006cfd30a7a4f5e5a052f677e05108
Reviewed-on: http://review.coreboot.org/8676
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Since CCLK_BURST_POLICY and SUPER_CCLK_DIVIDER are not accesible
from AVP, the first place that can change CPU clock is after CPU
has been brought up, ie, ramstage in this case.
CPU initial clock source is set to PLLP by MTS.
BUG=None
TEST=Norrin64 and A44
Original-Change-Id: I525bb2fa2be0afba52837bc0178950541535fd22
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209698
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ba77e26508bb4a50a08d07ad15632ff1ba501bfa)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icf2458c491b4b3a553d3e01f88c6f25b25639e89
Reviewed-on: http://review.coreboot.org/8677
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently, the rmodules inclusion for vboot is dependent on ramstage_arch.
This change adds dependency on romstage_arch, since vboot is associated with
romstage. Inclusion based on ramstage_arch is left as is in case someone needs
it in ramstage.
BUG=chrome-os-partner:30784
BRANCH=None
TEST=Compiles successfully for link, rush and nyan
Original-Change-Id: Ib62415671c26a4a18c7133d98e8c683414def32b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209568
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 00da67cc02c81d7a6160f7336b33bf53b00e1875)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9df02134af4e396c7257a2db2e2c371cfd1a02bc
Reviewed-on: http://review.coreboot.org/8673
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide functionality to create dynamic classes based on program name and the
architecture for which the program needs to be compiled/linked. define_class
takes program_name and arch as its arguments and adds the program_name to
classes-y to create dynamic class and compiler toolset is created for the
specified arch. All the files for this program can then be added to
program_name-y += .. Ensure that define_class is called before any files are
added to the class. Check subdirs-y for order of directory inclusion.
One such example of dynamic class is rmodules. Multiple rmodules can be used
which need to be compiled for different architectures. With dynamic classes,
this is possible.
BUG=chrome-os-partner:30784
BRANCH=None
TEST=Compiles successfully for nyan, rush and link.
Original-Change-Id: I3e3aadbe723d432b9b3500c44bcff578c98f5643
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209379
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 242bb90d7476c2ee47d60c50ee18785edeb1a295)
Some of this cherry-pick had already been committed here:
commit 133096b6dc
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9f5868d704c4b3251ca6f54afa634588108a788c
Reviewed-on: http://review.coreboot.org/8672
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In some previous attempt to enable monotonic timers on all platforms,
the LAPIC monotonic timer was selected for Haswell devices, despite
the fact that LAPIC timers are not used in coreboot on Haswell
(See haswell Kconfig) and there already was a monotonic timer
implementation enabled that just needed to be added for SMM as well.
Change-Id: I6beb2977864e507956636860ed463e1991cea1ed
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/8702
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
When the Intel SPI drivers were refactored, compilation for Chrome OS
devices broke, because ELOG uses the SPI driver in SMM.
Change-Id: If2b2da5d526196ed742e17409b01a381417d0ce8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/8701
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
On ChromeOS devices the ELOG section size and offset are
provided by the FMAP, rather than KConfig. Some upstream
refactoring broke compilation in that case.
Change-Id: I8b08daa327726218815855c7c2be45f44fcffeed
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/8700
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Under certain conditions, e.g. automated testing, it is useful
to have the payload (e.g. Linux) reset the reboot_bits CMOS
value. This allows automated recovery in the case of coreboot
starting properly but the payload failing to start due to bad
configuration data provided by the coreboot image under test.
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Change-Id: Ifc8f565f8292941d90b2e520cc9c5993b41e9cdd
Reviewed-on: http://review.coreboot.org/8698
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
From GCC's documentation:
Optimize debugging experience. -Og enables optimizations that do not interfere
with debugging. It should be the optimization level of choice for the standard
edit-compile-debug cycle, offering a reasonable level of optimization while
maintaining fast compilation and a good debugging experience.
Change-Id: I9a3dadbf8e894cb28e29d7b2f4e9add252e7bbb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8689
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This removes the mainboard agesawrapper.c file from binarypi
based boards and creates a common one.
Change-Id: I900dba914f1c401e4ac732eb93d94b98216e629a
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8671
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This makes the change to the cpu/amd/pi/00730F01 that was
made for the cpu/amd/agesa based boards in:
commit 48518f0d
AGESA: Add amd_initcpuio() and amd_initmmio()
These are not wrappers for AGESA as they do not enter vendorcode at all.
We expect most of the added fixme.c file to be written without use of AMDLIB.h
and parts relocated as northbridge enable_resources().
The equivalent change has already been made for cpu/amd/pi/00630F01.
Change-Id: I591b50ee807436f5a1dee14d2c88a77462024744
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8670
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested on an X60, Native graphics init still works perfectly.
Change-Id: I91be3baa658e0332028c512c5a4cb0aee07d540a
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: http://review.coreboot.org/8696
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Most things still needs to be filled in, but this will allow us to build boards which use this SOC.
BUG=chrome-os-partner:29778
TEST=emerge-veyron coreboot
Original-Change-Id: If643d620c5fb8951faaf1ccde400a8e9ed7db3bc
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205069
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2f72473a8c2b3fe21d77b351338e6209035878fb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I53fd0ced42f6ef191d7bf80d8b823bb880344239
Reviewed-on: http://review.coreboot.org/8653
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I thought this wasn't going to work, and observing the timC detection
failure of early tests, I was getting somewhat discouraged; however,
this works. I've tried it with all possible permutations of the
following memory modules:
* 2 GiB single-rank DDR3-1600
* 4 GiB single-rank DDR3-1600
* 4 GiB dual-rank DDR3-1600
I did notice a limited number of memtest errors during one of the
runs, but they were in an address range that is otherwise marked as
reserved. I wrote that off as "maybe something was doing MMIO there
just when memtest was poking the address range". I was not able to
reproduce that error.
Change-Id: Ibd52e1d52fc8d900591d6a488f9a5b4d1e5e4fd3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8477
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
This brings the KFSN4-DRE in line with other boards in the tree.
Change-Id: I9216130f51ed0576871fd27ca6ae4610c5f5810e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8683
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This was missed in commit bde6d309 as the driver is not enabled
in any configuration by default.
Change-Id: I3d886531f5bcf013fc22ee0a1e8fa250d7c4c1a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8660
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
There is no point in duplicating boardid.h per board - they are all
the same. Let's keep a single instance in the common include directory
and let the linker report a problem if one tries using this function
on a board where it is not supported.
BUG=chrome-os-partner:30489
TEST=verified that coreboot builds fine for nyan_big and nyan_blaze.
Original-Change-Id: Ifbe9c2287a1d828d4db74c637d1d02047ac4da25
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209699
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 589e6415faf18ca6aaf44da343dd33eadc8a53d3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8eef89cb822611a0050e5a50fc4b970eebd8d962
Reviewed-on: http://review.coreboot.org/8666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is useful when the PCB layout of a mainboard does not allow
stable operation at the increased HyperTransport speeds of newer
processors.
Change-Id: Idc93a1294608178ddf38ca72d40e6bad7deb9004
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8464
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patch removes a chunk of romstage code from Tegra and all Nyan
boards that was supposed to enable some LCD power rails early, but never
really worked. The dev_find_slot() function can only find PCI devices,
which the CPU cluster is not. Since we're done with Nyan-RO and the
ramstage display code is fine as it is, there is no point in trying to
fix this... but we should remove it from ToT lest someone uses it as a
blueprint to add more dead code to future boards.
BRANCH=None
BUG=None
TEST=None
Original-Change-Id: I6eee256873299429d4e3934fe7d454120390f34d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207720
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a3df62a3bcefcc20ae59648f5d1f0a01db3c02c6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8deedea5e9787848aae3064509c611bc349313cc
Reviewed-on: http://review.coreboot.org/8638
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This capability means:
FERR messages are sent out on system detected an
unmasked floating point x87 FPU error.
Even though this capability is supported on nehalem it doesn't
make sense to set it in early stage. This MSR
has a core scope which results in an unsync MSR because
it's not set on other cores than the BSP.
Found-by: BITS
Tested-on: lenovo thinkpad x201t
Change-Id: Ief3c04f57ac69e7289fbd37dbc3fd239f9098155
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8659
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BIOS Writer's Guide, rev 1.6.0, June 2012:
This MSR controls whether and FERR message is sent over the system bus
when unmasked x87 exceptions are generated.
This feature is not supported from Sandy Bridge processor onwards.
Change-Id: I19b260ca4b62f57c26989430693b00b9853bc441
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8658
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Stop running AVP at the end of romstage until event conditions are met (JTAG,
GIC_IRQ or LIC_IRQ).
BUG=chrome-os-partner:30831
BRANCH=None
TEST=Compiles successfully and boots till last known good checkpoint.
Original-Change-Id: Ia221f08b27ac0c60a66d588e351677144cc6a322
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209424
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit df4e8b4c8a1002443a936bd0563fbc9e0710f489)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I59f7702bd50a1039b8723e9cb12b8d714e353d37
Reviewed-on: http://review.coreboot.org/8651
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The SPI controller operates on packets which can be variable
length up to 32-bit packets. It also has the ability to be
put in packed or unpacked mode w.r.t each packet. i.e. does
a single fifo register hold >= 1 packet. The current programming
uses 8-bit packets in unpacked mode which means 4 fifo slots
are used for a 32-bit DMA transfter. As the AHB can only operate
on a minimum of 32-bit bursts the triggers need to be programmed
correctly so that there is room for a full 32-bit DMA transaction.
Previously faster SPI clocks just made things magically work.
BUG=chrome-os-partner:30779
BRANCH=None
TEST=Built and booted through coreboot with 20MHz SPI clock.
Original-Change-Id: I3f1cd4dddcea9514327b2363ed450a527db7e1fe
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208862
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d9864228a2479e412d7e0d2221fe536f78329acd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I61c145f35e1f889d4f83f3dfea049bfd347c1196
Reviewed-on: http://review.coreboot.org/8649
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Trust Zone carveout registers are only accessible using
a secure access mode. The AVP runs as non-secure all the time.
In EL3 the CPU is in secure mode, but when the MMU is enabled
the page tables dictate if accesses to certain regions are
secure or not. However, ramstage is currently being loaded
into non-secure memory and the page tables will live in
non-secure memory as well. Therefore, handle all these
cases by providing global state which mirrors the TZ
register.
BUG=chrome-os-partner:30782
BRANCH=None
TEST=Built and ran through ramstage with the MMU enabled
Resources are read and set accordingly.
Original-Change-Id: Ib76b2641497a29ef2adb75934b2df55ecf0b3e78
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209061
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0bcbdc56978f6ebe3e7d1b74ed2fd861e03bb562)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9c1beed443a48870ba190427e87caf90caf4ff6b
Reviewed-on: http://review.coreboot.org/8648
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add support for mmu initialization and enabling caches. mmu_operations provides
functions to add mmap_regions using memrange library and then calls mmu_init for
armv8.
BUG=chrome-os-partner:30688
BRANCH=None
TEST=Compiles rush successfully and boots until depthcharge load. Goes past
all the earlier alignment errors.
Original-Change-Id: I57c2be80427fa77239093c79ece73e31fd319239
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208762
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit a6141d13d40cfa5a493bde44e69c588dda97e8fd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I33bf4b2e28b85a3117b566cb8497f2bd5aabb69b
Reviewed-on: http://review.coreboot.org/8647
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for initializing and enabling mmu for armv8. Using 64KiB granule and
33 bits per VA, thus total VA address space is 6GiB. PA Range is 64GiB. Makes
use of memrange library to get a list of all the mmap regions from the SoC to
initialize XLAT table.
Currently, all calculations in mmu.h are based on the assumptions that max 33
bits are used in VA and granule size is 64KiB. Changes in these assumptions will
have to reflect in the dependent calculations as well.
BUG=chrome-os-partner:30688
BRANCH=None
TEST=Compiles rush successfully and boots until "payload not found". Goes past
all the earlier alignment errors.
Original-Change-Id: Iac1df15f0b81dcf64484a56b94f51357bcd67cc2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208761
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6fe96360c03342115f849074f9e45a2c4e210705)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5360a3be95f198bd0b4f79b62f31228cc7a9c285
Reviewed-on: http://review.coreboot.org/8646
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Other default slams should be added later to the init table
once we know what the kernel touches. But for now, only VDD_CPU
is needed.
Also slipped in a minor name change in mainboard.c
BRANCH=none
BUG=none
TEST=none, no HW here for me to test on yet
Change-Id: Ifbe86192449ed0466085808a0a12a15a7b6a1795
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: https://chromium-review.googlesource.com/208385
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 53b332fb12cd685fbec265695333a70c4064524c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8645
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With this memory resource, the payload loading code should be
able to create a bounce buffer and load the payload successfully.
Adapted from tegra124 soc.c
BUG=None
BRANCH=None
TEST=Built and booted to ramstage on rush.
Original-Change-Id: I2e336ce93c1b0236104e63d3785f0e3d7d76bb01
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208121
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 20765da0b15ee8c35a5bbfe532331fc6b1cef502)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I267ced473ad0773b52f889dfa83c65562444c01f
Reviewed-on: http://review.coreboot.org/8644
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Once LPDDR3 init is supported in the ryu romstage, this can
be reverted. Note that this 528MHz BCT has been pre-qualed
by NVIDIA AE's, but will be updated as more tuning is done.
BUG=none
BRANCH=none
TEST=Builds, BCT is in binary, but I have no HW here to test on
Original-Change-Id: I315a9a5d56290bb5f51863b15053d2171db7b1e4
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208384
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 660e40cb473d47ce763e79d6061367bf381a1c48)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I29ad31fc83f45ca8f92809a7dc252cf984c8c6fe
Reviewed-on: http://review.coreboot.org/8643
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The CCSIDR_EL1 register has cache attribute information
for a given cache selection in CSSELR_EL1. However, the
cache isn't being selected before reading CCSIDR_EL1.
Instead use CTR_EL0 which better fits with the semantics
of dcache_line_bytes(). CTR_EL0 has the minimum data cache
line size of all caches in the system encoded in 19:16 encoded
as lg(line size in words).
BUG=None
TEST=Built.
Original-Change-Id: I2cbf888a93031736e668918de928c3a99c26bedd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208720
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 8d5dfba35d74fc4c6ee14365a2e9d9ed9f43115d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1db47ff5850c276d0246ac67e8b96f7ed19016c0
Reviewed-on: http://review.coreboot.org/8642
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The address map code was originally assuming all carveouts would
be packed together in the upper end of the physical memory
address space. However, the trust zone carveout is always in the
32-bit address space. Therefore, one needs to query memory ranges
by above and below 4GiB with the assumption of carveouts being
packed at the top of *each* resulting range.
BUG=chrome-os-partner:30572
BRANCH=None
TEST=Built and ran through coreboot on rush.
Original-Change-Id: Iab134a049f3726f1ec41fc6626b1a6683d9f5362
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208101
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 8d5795fbff36e91906384e10774a32541d358324)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If15ff48d5a4c81731eb364980b30c8086deb1cca
Reviewed-on: http://review.coreboot.org/8641
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The default CBFS size configuration setting is incorrect in case of
Qualcomm SOC targets, as the coreboot blob is much smaller than the
actual bootprom. Note that this size also must match the board fmap
defined in the appropriate depthcharge board directory.
BUG=chromium:394068
TEST=manual
. previously failing to boot coreboot image does not fail to load
depthcharge anymore.
Original-Change-Id: I1b178970b1deee05705490542e4a0c57500379dd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208146
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 01f3561fdee7b5547534e20d423fbbb1b490532c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If573bbc6254cf6786e75970eae3ad2b327a7ecfe
Reviewed-on: http://review.coreboot.org/8640
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide a default Trust Zone region size of 1MiB, and
correctly account for it in the AVP and the arm64 cores.
The different path between the arm64 cores and the AVP
is because the AVP cannot access the Trust Zone region
registers. Therefore the AVP needs to account for the
Trust Zone region.
BUG=chrome-os-partner:30572
BRANCH=None
TEST=Built and ran. Noted Trust Zone region being accounted for.
Original-Change-Id: Ie0f117ec7a5ff8519c39778d3cdf88c3eee57ea5
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208062
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 22f2fa05c009c58f53b99b9ebe1b6d01fdac5ba7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I28506b4401145d366b56126b2eddc4c3d3db7b44
Reviewed-on: http://review.coreboot.org/8639
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Set correct gpio routing and enable bits for EC SMI gpio and EC WAKE gpio.
Verified with schematics.
Change-Id: Ie3b98c4456a870c881e7663b19eb8ca8e5564c5c
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8358
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Currently on AMD boards no romstage messages can be saved in CBMEM, so
only messages from ramstage on will be stored in CBMEM. Other than
that nothing changes.
Enabling CBMEM console by default does not noticeably decrease boot
time as the messages are directly written to CAR or RAM.
The board status script under `util/board_status/` reads the coreboot
messages from CBMEM, which are then uploaded to the board status
repository. With CBMEM console disabled by default, currently no
coreboot console messages are uploaded to the board status repository,
although it is important to have those.
Enabling CBMEM console by default improves this situation, so that for
all boards at least ramstage messages are stored in the board status
repository.
Change-Id: I8d5a58c078325c43a0317bcfaafc722d039aab0b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5350
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
There is nothing platform specific in retrieving S3 resume state from
romstage_handoff structure. Boards without EARLY_CBMEM_INIT update
acpi_slp_type from ACPI power-management block or scratchpad registers.
Change-Id: Ifc3755f891a0810473b3216c1fec8e45908fc1ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8188
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This was added to handle cases of Intel FSP platforms that had
EARLY_CBMEM_INIT but could not migrate CAR variables to CBMEM.
These boards were recently fixed.
To support combination of EARLY_CBMEM_INIT without CAR migration was
added maintenance effort with little benefits. You had no CBMEM
console for romstage and the few timestamps you could store were
circulated via PCI scratchpads or CMOS nvram.
Change-Id: I5cffb7f2b14c45b67ee70cf48be4d7a4c9e5f761
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8636
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
If it's not supported on a particular board, either the build will fail or
checks within the cbmem console itself should detect the problem. There
shouldn't be random memory corruption any more.
BUG=None
TEST=Built with CONSOLE_CBMEM enabled on nyan and saw that it was actually
enabled.
BRANCH=None
Original-Change-Id: Id6c8c7675daafe07aa4878cfcf13faefe576e520
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193167
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 20b486443bfc2d93d72bbc9e496023a00ab9ab30)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I39fbcdff61f6d8f520f2e9d7612dee78e97898b1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7748
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Commit 2e0cf14 corrected this for pi/00730F01/northbridge.c.
This commit fixes it for pi/00630F01/northbridge.c.
Found-by: Clang
Change-Id: I4eb93a07aacf6ffc5a159222117e7c934d85859e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8289
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Also fix a typo in a config option for SteppeEagle.
Change-Id: Iad51cc917217aa0eac751dc805c304652d20e066
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7247
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The CAR macros and the associated functions are only employed
under the following conditions:
- chipsets which have CAR
- compilation during romstage
Therefore clean up the build-time conditionals to use those 2
constructs.
Change-Id: I2b923feeb68f2b964c5ac57e11391313d9c8ffc5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8634
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Starting with version 2.1 qemu provides a full set of smbios tables
for the virtual hardware emulated, except type 0 (bios information).
This patch adds support for loading those tables to coreboot.
The code is used by both i440fx and q35.
Change-Id: Id034f0c214e8890194145a92f06354201dee7963
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/8608
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
x86 systems run their romstage as execute-in-place from flash, which
prevents them from having writable data segments. In several code pieces
that get linked into both romstage and ramstage, this has been worked
around by using a local variable and having the 'static' storage class
guarded by #ifndef __PRE_RAM__.
However, x86 is the only architecture using execute-in-place (for now),
so it does not make sense to impose the restriction globally. Rather
than fixing the #ifdef at every occurrence, this should really be
wrapped in a way that makes it easier to modify in a single place. The
chromeos/cros_vpd.c file already had a nice approach for a wrapper
macro, but unfortunately restricted it to one file... this patch moves
it to stddef.h and employs it consistently throughout coreboot.
BRANCH=nyan
BUG=None
TEST=Measured boot time on Nyan_Big before and after, confirmed that it
gained 6ms from caching the FMAP in vboot_loader.c.
Original-Change-Id: Ia53b94ab9c6a303b979db7ff20b79e14bc51f9f8
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203033
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit c8127e4ac9811517f6147cf019ba6a948cdaa4a5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I44dacc10214351992b775aca52d6b776a74ee922
Reviewed-on: http://review.coreboot.org/8055
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Make compilation fail if this is included in non-romcc compiles.
I am a bit surprised that this ever compiled.
Change-Id: I8dfc1229681819d2381821a0195a89b44dd76b6a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8420
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
All boards in tree use 0. Looks like this is all work that was
never completed and tested.
We also have static setting sysconf.segbit=0 which would conflict
with PCI_BUS_SEGN_BITS>0.
Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support
to cover over 255 buses.
Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8554
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
They don't contain any useful information and
also block us from having reproducible builds.
Change-Id: Ib03887f6a548230de9f75fb308c73a800e180c48
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8616
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Also drop some more #if UNUSED_CODE.
Change-Id: I1bbe96a65c9240636ff7cfaf70c2ecbfb3aee715
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8551
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There is no requirement that in dev->link_list the last element
would have the highest link->link_num.
Also fix off-by-one error when allocating for more links.
Change-Id: Id8a7db3ffb4111eb31e70ea14fd522b70368dd8c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8550
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Since commit ee894357 (cpu/intel (non-FSP): Use microcode from
blobs repository), selecting the option to generate the
microcode from tree fails without allowing to use the BLOBs/
3rdparty repository, which is the default setting.
Therefore, only show the option, if the user has selected the
option to allow the use of the BLOBs repository.
Change-Id: Ide20da0f946aae43dc2c8cdce54941c704d3d288
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8627
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:31424
BRANCH=none
TEST=build only, due to I don't have broadwell system with wifi to test
need somebody help me to verify
Change-Id: I52360176e135ea7f01cc67a926be4870265f57d1
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/220743
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8448
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Set PCIe "Enable Clock Power Management", if endpoint supports it.
BUG=chrome-os-partner:31424
BRANCH=none
TEST=build and boot on rambi, check Enable Clock Power Management
in link control register is set properly
Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/220742
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
[Edit commit message.]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8447
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
At some point the license text for a file was incorrectly
changed. That license was then copied and pasted. I'm sure it
was myself. Anyhow, fix the bustedness.
Change-Id: I276083d40ea03782e11da7b7518eb708a08ff7cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8620
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
src/include/device/ is the place for include files of the resource
allocator. Hence, drop the i915 include file copies and use the ones
supplied with the i915 driver instead. The only remaining user of this
was the Intel Whitetip Mountain 2 reference board, all other occurences
have been previously fixed already.
Change-Id: Ib9f72df4e8f847597508971e9dbf671f49019767
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8140
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The BKDG for K10 revision D and later processors recommends a smaller
MCT burst write queue depth when using unganged memory.
TEST: Booted ASUS KFSN4-DRE with both Opteron 8356 and Opteron 2431
processors.
Change-Id: I36718d4972c9d2d0bdd3274191503b5fcd803f15
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8500
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This change brings all agesawrappers in a single file to make it
easier to understand the actual execution flow.
Change-Id: Ifbb2b16e4cccfaa17aaf10887a856797be9b6877
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We do not allow platforms to mess around with memory layout.
Change-Id: I316ff522c8833fa3b7ad20f2c5a9cae21f4174d8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to make sharing of the location of MTS microcode easier
provide a Kconfig option that is the path to the files.
BUG=chrome-os-partner:30569
BRANCH=None
TEST=Built rush coreboot.
Original-Change-Id: I36775d0018fc8591d5e77c2943e28a51381713f5
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207839
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6f1de0e7fd312c1d6798e65d4b43d586f0994337)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I660cb9d8bd13c765c89b54b0807b5b3ee836e807
Reviewed-on: http://review.coreboot.org/8614
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The preboot MTS microcode needs to be supplied within the
bct so the BootROM can load it. The size of the bootblock
space in SPI needed to be extended to accomodate the extra
length.
BUG=chrome-os-partner:29059
BUG=chrome-os-partner:29060
BRANCH=None
TEST=Built rush with updated cbootimage with t132 support.
Original-Change-Id: Iafc1837cd81cc1165a9be5da6ec7425cec2e2ffc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204940
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 22e054496465c74fc12afd865d14b87c5858d889)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5e46c408a7215ecc789b0a0f35070ef9036a7d11
Reviewed-on: http://review.coreboot.org/8466
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The former pstates_algorithm() function has two early exit
points now, and so it might never get around to writing
pstates data.
Change-Id: I19ca937375c6d33b78bd5b1859fa5c25473be9b6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8610
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
If a certain register returns crap values, we
determine core_power using an uninitialized variable.
That doesn't sound healthy.
Change-Id: I1e890b78bfcc3bf0255a3d4f6561a783134b1719
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8508
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
With BOARD_VARIANT_AP148 configuration option enabled the image will
be built for 512MB DRAM instead of 1024MB and the
mainboard_part_number field in the lb_mainboard entry will be set to
"AP148" instead of "Storm".
BUG=chrome-os-partner:30440
TEST=manual
. built and booted both AP148 and proto0 all the way to reading the
kernel
. verified that the config file includes correct part number and
memory size
. verified proper machine IDs reportted when starting the kernel
Original-Change-Id: Ie609544a460fc991e66e8b95e8d7a3ed5e845f7b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207427
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a80ab00f27eef9e3aa2f761659d6945d6fce2ef6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I477e672dc4f48fa9c9893bf0759704501ea07b1a
Reviewed-on: http://review.coreboot.org/8590
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Some of the SoC's need an early hook to configure
certain registers. One example of this is on t132
where ramstage is the first thing being ran on the
arm64 core and it is the only entity that can configure
certain registers required for the rest of ramstage.
Therefore, provide the opportunity for the SoC to
implement such requirements.
BUG=chrome-os-partner:30572
BRANCH=None
TEST=Built and ran through coreboot.
Original-Change-Id: Ib352f3788872f888581b398c9b394b7c4e54b02a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208061
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 2c50e2b39e75d1383e8e573c576630a5b7313349)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I38df63e46c5c21b2d319fc9eb42053c3a0d61bc8
Reviewed-on: http://review.coreboot.org/8595
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is a clone of rush for the time being. All the incompatible
bits can be moved later. Additional patches to follow.
BUG=chrome-os-partner:30569
BRANCH=None
TEST=Built coreboot for rush_ryu board
Original-Change-Id: Iae56d016d0c328d83242b95f307fefaa8c68deec
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207838
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit cf2b88963743e40a35d841ef522172cb2448abbf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I92a8b4d31fac4a25e3afa3b6e158e1dba0f80aab
Reviewed-on: http://review.coreboot.org/8594
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The TrustZone carve-out needs to be taken into account when
determining the memory layout. However, things are complicated
by the fact that TZ carve-out registers are not accessible by
the AVP.
BUG=chrome-os-partner:30572
BRANCH=None
TEST=Built and booted to end of ramstage. Noted that denver cores
can read TZ registers while AVP doesn't bother.
Original-Change-Id: I2d2d27e33a334bf639af52260b99d8363906c646
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207835
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit a4d792f4ed6a0c39eab09d90f4454d3d5dc3db26)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8fbef03d5ac42d300e1e41aeba9b86c929e01494
Reviewed-on: http://review.coreboot.org/8593
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Since RES1 and RES0 bits are marked as SBOP(Should-Be-One-or-Preserved) and
SBZP(Should-Be-Zero-or-Preserved) respectively, resetting the SCTLR and SCR
registers should be done with proper bitmask.
BUG=None
BRANCH=None
TEST=Compiles successfully and verified that the RES bits are preserved across
register writes.
Original-Change-Id: I5094ba7e51e8ea6f7d7612ba4d11b10dcbdb1607
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207815
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit dfb196b4063e4f94d1ba9d5e2d19bae624ed46b3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I033a68b723fea83817aaa6402b86c78abd3e1da9
Reviewed-on: http://review.coreboot.org/8592
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
The carve-out regions need to be taken into account when
calculating addressable memory because those regions aren't
accessible from the main cpu. The additional exposed functions
are to accommodate adding resources during ramstage resource
reading. The TZ (trust zone) region is empty for now until
more documentation is provided on determining its location.
BUG=None
TEST=Built and booted through attempting payload loading.
MTS carve-out is taken into account programmatically.
Original-Change-Id: I3301b2a12680ad79047198ada41f32eb1b7fa68b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207585
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 15b9c74dd1ef5bfb1fd7c6dab50624f815658e14)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I46d54dbbb8e102fc70ab34bc4bbd2361ef1ea504
Reviewed-on: http://review.coreboot.org/8591
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Enabled CBMEM support for t132 platforms. Some of the existing
code is moved around to avoid dependencies in the other stages
that need it.
BUG=None
BRANCH=None
TEST=Built and booted a rush with cbmem support.
Original-Change-Id: I78a31b58ab9cc01a7b5d1fffdb6c8ae0c446c7dd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207163
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit f552197dbda06c754b5664c3bed4ed361154229a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8fa2919714b467cc976e5bb5c4716e5b7979694b
Reviewed-on: http://review.coreboot.org/8589
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The startup sequence for cpu0 is implemented while also
providing a trampoline for transitioning to 64-bit mode because
the denver cores on t132 come out of cold reset in 32-bit mode.
Mainboard callbacks are provided for providing the board-specific
bits of the bringup sequence.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and booted through ramstage.
Original-Change-Id: I50755fb6b06db994af8667969d8493f214a70aae
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207263
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 17f09bf4bdb43986c19067ca8fd65d4c5365a7c6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I14d99c24dd6e29a4584c8c548c4b26c92b6ade97
Reviewed-on: http://review.coreboot.org/8586
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This mainboard is based on Intel's Bayleybay
board which uses Bay Trail CPU with Intel FSP.
It has one USB3.0 interface, 4 USB2.0 interfaces,
up to two Ethernet ports and a LVDS connection
for LCD panels. The board is equipped with 512 MB
of DDR3 in a memory down configuration.
This board boots into Ubuntu/Lubuntu 14.10 using SeaBIOS,
but other OSes should work as well (but are not tested).
It has a version.hex file which is needed for
our OS and has no hardware functionality.
Change-Id: I94401bbd1d61ec69703de38ae1bc97969c5d979e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8430
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a driver wich can handle the internal I2C controllers
of Baytrail SoC. This driver is not suitable for the
SMBus controller.
Change-Id: I841c3991a2fb0f8b92b8e59ec02d62f5866f5bdf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8401
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a new microcode for Bay Trail M D0 stepping used
in cpu N2807 silicon.
In addition, a selection of the used CPU type has
been added (I or M/D) which allows to use only the
really needed microcode for a given CPU type.
Change-Id: I373fc9b535f1dc97eaa9f76ae46f0b69b247a8a0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8399
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To align with arm use the RAMSTAGE_BASE Kconfig option
for start of ramstage. Also, use 16-byte alignment for the
start and end of the sections. 4 bytes were previously used, but
it definitely seems more appropriate to at least have the heap
handing out 16-byte aligned pointers.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and booted through attempting to load payload
Original-Change-Id: I39329055696ae21a9ed1d9a64769981ab4dcdddd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207432
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6291f3bed705154743be78a881a26dfc9d041c5e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic280b4c6435c4f8e0e783fe5bd4694832ce9b550
Reviewed-on: http://review.coreboot.org/8588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Inconsistent progress was observed running ramstage.
It was determined that the hand-coded assembly functions
were causing issues. Some of the comments seems suspect about
the hardware taking care of alignment. The prudent thing to do
is to use the C ones. Optimization can come later after maturity.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and booted to attempting to payload
Original-Change-Id: I4137adf9b36b638ed207e4efd57adaac64c6a6c1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207431
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 2762e478c6b59dd30c59aa87a922d0f78c00c0c4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3196b0c2bf41a21db31f999ba437d118875a236
Reviewed-on: http://review.coreboot.org/8587
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Ramstage needs an assembly entry point for setting up
the initial state of the CPU. Therefore, a function is
provided, arm64_el3_startup(), that bootstraps the state
of the processor, initializes the stack pointer, and
branches to a defined entry symbol. To make this work
without adding too much preprocessor macro conditions
provide _stack and _estack for all the stages.
Currently the entry point after initialization is 'main',
however it can be changed/extended to do more work such
as seeding the stack contents with tombstones, etc.
It should be noted that romstage and bootblock weren't
tested. Only ramstage is known to work.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Brought up 64-bit ramstage on rush.
Original-Change-Id: I1f07d5b6656e13e6667b038cdc1f4be8843d1960
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207262
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 7850ee3a7bf48c05f2e64147edb92161f8308f19)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia87697f49638c8c249215d441d95f1ec621e0949
Reviewed-on: http://review.coreboot.org/8585
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The driver structures live in special sections which have no
direct reference to the symbols. Therefore, when garbage
collecting sections in the linker the drivers are tossed out
resulting in no drivers being linked into ramstage. Fix this
by adding the KEEP() directive to those special sections.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and noted console starts working in ramstage.
Original-Change-Id: Iaa0fd428bf975c82d4e6b0e75a17e6fd231fbaa9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207261
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 7c1a3e63e398755de0c77524a0483e6f1019aac0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e30e73be754ec849cb3cfac3bcb12e95b0f60d4
Reviewed-on: http://review.coreboot.org/8584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
1) In order to avoid stack from overflowing during ramstage decompression,
initialize stack right at the beginning of romstage.
2) Declare different Kconfig options for stack at each stage.
3) Provide a macro that does stack seeding if required and calls appropriate
function.
BUG=None
BRANCH=None
TEST=Compiles and runs successfully on rush.
Original-Change-Id: I55d6ce59ea91affba3e86d68406921497c83fb52
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206880
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5e32d73803a2a9d222fcc4ca5f58efd3abe95d34)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib833a1badb170a33cbf20d232019425b59db60cd
Reviewed-on: http://review.coreboot.org/8583
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Still waiting on VDD_CPU value, etc. from board guys, but this is a start.
BUG=None
BRANCH=None
TEST=Built and flashed rush, saw 'PMIC init done' string OK.
Original-Change-Id: I6f8b16c4ebf1e9c159f8175d59262119ef0e498f
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206412
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 96a9ff8f632c2b9bf3f81f5b8fc4f3b6784a02bc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9d3d7ff55f2d6ca88ebdcc8ad1d7de135f5136d2
Reviewed-on: http://review.coreboot.org/8582
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Once the MTS microcode is loaded the core complex can be
directed to decode the MTS and start running. The cores,
however, won't start executing until instructed to do so.
BUG=chrome-os-partner:29222
BRANCH=None
TEST=Built, booted, ran. Noted it took about 920ms for the
core complex to decode and handshake back.
Original-Change-Id: I0a9ed53e596eb65801461b2769d133710a92a48a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206075
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit 6edb6e21a69d84ba5b23137e9e390954159e7887)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I179e561bb3a34b206620eecde6781a1c05a3744e
Reviewed-on: http://review.coreboot.org/8581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The armv8 cores need to have microcode loaded before they can
be taken out of reset. Locate and load the MTS microcode at the
fixed address of 0x82000000. The ccplex, once enabled, will
decode and transfer the microcode to the carveout region.
BUG=chrome-os-partner:29922
BRANCH=None
TEST=Built and ran. Confirmed dump of MTS region after loading code.
Original-Change-Id: Ie5ab72e5363cbdb251d169356f718020d375fce6
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206290
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6726d8862c08b155b9218aa5e2e39428a105089e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I425c2e2fd1eaec49d81bef1ff4bf4f36da9296df
Reviewed-on: http://review.coreboot.org/8580
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As a convenience, print the actual stage name when entering a stage.
Also unify the banner between bootblock / romstage and ramstage. No
reason for two different occurences.
Instead of this:
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 booting...
you will see this:
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 bootblock starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 romstage starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 ramstage starting...
Roughly based on: https://chromium-review.googlesource.com/199671
Change-Id: Id5894535e0551d113c80e4ff0514287391be1bef
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8578
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The recommended settings for the size of the MTS region is 128MiB.
Therefore, provide this region 128MiB below the top of DRAM for
each configuration.
BUG=chrome-os-partner:29922
BRANCH=None
TEST=Built and noted MTS carveout region at expected location.
Original-Change-Id: Iac17f210dfef8e8a36617c7b3dceba8c2134ee9b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206291
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit f1758c74330afe9dd7eaa8ff1fef5e4d18ed14ad)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I369a3897e31f3126d031d3582f52f9892350f658
Reviewed-on: http://review.coreboot.org/8579
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Use the Kconfig value to load the name of the stage instead of the
hard-coded fallback stage.
(cherry picked from commit de4310af6f6dbeedd7432683d1d1fe12ce48f46e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1ac707efe38e29f109dbbe206de74fbfe7cb7b0b
Reviewed-on: http://review.coreboot.org/8576
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
There's no reason to duplicate code in the mainboards. Therefore,
drive the flow of romstage boot in the SoC. This allows for
easier scaling with multiple devices.
BUG=None
BRANCH=None
TEST=Built and booted to same place as before.
Original-Change-Id: I0d4df84034b19353daad0da1f722b820596c4f55
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205992
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit de4310af6f6dbeedd7432683d1d1fe12ce48f46e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie74f0eb1c983aff92d3cbafb7fe7d9d7cb65ae19
Reviewed-on: http://review.coreboot.org/8575
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Add support for initializing dram within romstage. This is an essential before we
move to the armv8 core.
BUG=None
BRANCH=None
TEST=Compiles succesfully for rush. Tried writing to and reading value from the
base of sdram and it worked fine. Also tested with primitive_memtest CL:
https://chromium-review.googlesource.com/#/c/186309/5
Original-Change-Id: I67ec04c766e249c9727b0cf2ba216522c862c2f5
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205823
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 33c468b16e7ccd8cf9266d6a9ca30c02da104821)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4baface2c109ca74f85f43a25508677c46c64159
Reviewed-on: http://review.coreboot.org/8574
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Add basic romstage support for rush. Since, dram init needs to be done before we
can jump to armv8 core, romstage will run on armv4 core as well. Thus,
correcting the compiler selection options.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Prints romstage banner and initial printk
Original-Change-Id: Ie3cd290e56a712b07c1503dab199e4e34cec04d2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205763
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d20b4e66209e902f54a07a17d5ce741f0a0b3a7b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic6b7ef4a2ea01c95d0c7f040bbd079219cf5750a
Reviewed-on: http://review.coreboot.org/8573
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We suspect that the code was stuck on init pllx (PLLX - acts as a clock source
for the CPU cluster). So, remove the init call for pllx. This needs to be added
later when required. Also, add a few more printks to display the progress.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Print messages seen on serial console.
Original-Change-Id: I70e908a9ce1f3598d68bda68c0401a78834597d1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205680
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d557d99edb855fbf7b32231c6746c676041bf62a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iaf56f2d587708c6e9fb01d4ced2edb5931075a81
Reviewed-on: http://review.coreboot.org/8571
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Pull in mainboard specific bootblock_init function from nyan into
rush. Additionally, pull in all files required for proper compilation of rush
after adding the bootblock_init function
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I69c736275f66eca3ad92f97d166e91d4c2301364
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205583
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit e7aac547026717d7380f71593010e3ea34ecea51)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie26f91f8caaa06af3b195246febcdc70b9fe9795
Reviewed-on: http://review.coreboot.org/8570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Moved mctGetLogicalCPUID() to a separate file and made it available in
both romstage and ramstage.
Change-Id: I959c1caa8f796947b627a7b379c37d7307e2898e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8499
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: Ia9420cfec5333dd5477f04cf080bdad8a37db025
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203143
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a1037f203c6a07cb116eeb1632cb7200ad022cd3)
This cherry-pick was modified to match the tegra124 uart.c, which
uses the idx and base address calculations instead of Kconfig settings.
This driver could use the 8250MEM driver when the ARM vs x86 IO
calling convention is worked out.
Change-Id: I6e439359b8bb541db4679ac144c519cf251ffed6
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8517
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
This is just dead code.
Should we decide that we want some of these calls made, they would
be implemented in the mainboard context.
Change-Id: I1f097c8da722f3afab9aa1c80b96590c7ca457d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8532
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that we use the microcode updates in the blobs repository, remove
them from the main repo. Since the microcode updates are blobs, it
makes more sense to ship them in the blobs repo rather than the main
one.
The update-microcodes.sh script is also deleted, as a more current
version resides in 3rdparty.
Change-Id: Iee74a3ede3b5eb684ef0386d270120e70173c1b4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4531
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that microcode has been added to blobs, use that one instead of
the one included in the tree. Microcode from the tree will be
removed in a subsequent patch. Since the microcode updates are blobs,
they belong in the blobs repository.
This change may introduce a build failure if the "Generate from tree"
microcode option is selected, but the blobs repository is not
enabled. We have to live with this for now, until microcode is moved
to blobs for all CPUs, at which point we may adjust Kconfig
accordingly.
Leave the FSP cpu alone for now, as that will need approval from
SAGE.
Change-Id: Ia77ba2e26c083da092449b04ab2323b91a2ca15b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4530
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
During the development of commit bde6d30 (x86: Change MMIO addr
in readN(addr)/writeN(addr, val) to pointer), there were several iterations
and patterns tried. An intermediate pattern was the use of u32 pointers,
and division by sizeof(u32). Some of these did not get properly
changed to pointer types of length 1, causing a regression in
the Intel Ibex Peak SATA driver, fixed in commit 9b5f137
(Intel ibexpeak: Fix SATA configuration).
Other regressions of this pattern are fixed here. I audited all changes
to u32 types, and the other ones are safe.
Change-Id: I9e73ac8f4329df8bf0cdd1a14759f0280f974052
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Reviewed-on: http://review.coreboot.org/8530
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The Winbond W83793 fan controller is not automatically
configured correctly on power application, leading to
abnormal, and in some cases random, fan behaviour.
This commit enables the controller and sets sane default
values.
TEST: Booted mainboard and verified that the correct number
of fan speed sensors were visible from hwmon under Linux.
Also verified that, unlike before, the CPU fans were running
at a high enough speed to properly cool the CPUs. Verified
the 8 fan outputs under direct control of the W83793 device.
Verified voltage and temperature sensors and limits via output
of the 'sensors' command.
Change-Id: Ie3753bd3111d9d9eb46826da410c132caec4d9fe
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8503
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The version field for t132 cpus is 0x00130001. Update it to
the correct version.
BUG=chrome-os-partner:29882
BRANCH=None
TEST=Built and was able to see serial with subsequent changes.
Original-Change-Id: I39d560307261fdfc34e071f5c35a4397c134e03c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205435
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 14916b3ba5545ab2cb35b6a4a7fa231b895ede46)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I785069d3eb82ed24bafd52ef627d53505a35c09a
Reviewed-on: http://review.coreboot.org/8467
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CONFIG_CONSOLE_SERIAL_UART has been updated to
CONFIG_DRIVER_UART. The UART may be used for more than serial console.
Change-Id: Ife6e6861d210126b2b9ba5eee9ff72e8a447c47f
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8516
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The early_console.c file isn't used or built. It has been replaced
by the generic uart and console drivers.
Change-Id: I505b4e48d2369dbbfd92ef1dab364c5f2ed924df
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8529
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Fix up commit ce7ecf9c (baytrail: enable monotonic timer), which
selected `HAVE_MONOTONIC_TIMER` explicitly, although it is already
selected by `TSC_MONOTONIC_TIMER` (cf. `src/cpu/x86/Kconfig`).
Therefore remove the explicit selection of that Kconfig option.
Change-Id: I8964771947a6f7457dcdefe7a17be623ae0ef900
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8471
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
No real harm done (thanks to our free() implementation),
but let's do it right.
Change-Id: Ib98d28aabc043dff5c288728c33490a79f09f35a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8511
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add a new driver for Intel i210 MACPHY with the goal to
update the MAC address in i210 if it is found
during PCI scan.
Change-Id: I4d4e797543a9f278fb649596f63ae8e1f285b3c3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8404
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
DEFAULT_CONSOLE_LOGLEVEL_* is supposed to be selected by the user, and
should not be overriden by any other part of the tree. As such, remove
the selection of DEFAULT_CONSOLE_LOGLEVEL_7 from these two boards.
Change-Id: I194a71b371b184e81a16fec2bd21f1b0deb4ebbf
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8486
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
This option is already defined in console/Kconfig, and is intended
to be controlled by the user. Only six boards in the entire tree
redefined it, so remove the definition from those boards.
Change-Id: I3a65444f63c93c01d78569a9a7eb01158fb290bd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8457
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
SUPPORT_CPU_UCODE_IN_CBFS is a deprecated option now that all CPUs
with updateable microcode (except AGESA) load microcode from CBFS.
CPU_MICROCODE_ADDED_DURING_BUILD is a state variable that is set
based on user's choice in the microcode menu and should not be changed
directly.
Eliminate INCLUDE_MICROCODE_IN_BUILD variable, whose use directly
interferes with the microcode mechanism, remove selection of
CPU_MICROCODE_ADDED_DURING_BUILD, and do not depend
SUPPORT_CPU_UCODE_IN_CBFS on anything. This makes usage of the
microcode mechanism consistent with other CPUs in the tree.
This incorrect usage of the Kconfig variables was hiding the fact that
some of the microcode files present in fsp_baytrail/microcode_blob.c
were not present in the tree.
Change-Id: I71cb3f834c22c0363a20bd469797a9f51c215371
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8484
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Change gpp_configuration to GPP_CFGMODE_X1111 (was X4000), this is done
to only advertise x1 lane width for PCIe link 0:15.0.
Hide functions of PCIe links that have no slots connected. Our PCI
infrastructure does not support bridge devices that are set off
in devicetree but remain visible in the PCI hardware tree.
Change-Id: If90919634995076ab0f029baece3ba9cb8f3f3b2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8388
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Remove functions 0:12.1 and 0:13.1 that do not exist in the hardware.
Disable 0:14.1 IDE controller, as it would only be used with SATA ports
4 and 5 that are not populated with connectors in the hardware.
Disable 0:14.2 HD audio, as it is not implemented in the hardware
Disable 0:14.5 OHCI controller, as ports behind this USB1.1 -only controller
are not populated in the hardware.
Fix some alignment and whitespace.
To my knowledge these changes are not included with SAGE release
pcengines.apu_139_osp.tar.gz, but that tarball does not contain
either devicetree.cb or a pre-compiled static.c file so I cannot tell
for sure.
Change-Id: Idcb8e76645fce7e89a37ff7007531b668f472131
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8328
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Interrupts from USB controllers 0:16.0 and 0:16.2 were not routed
in PIC mode. The only affected peripheral was the SD card reader.
This patch is not included with SAGE release pcengines.apu_139_osp.tar.gz.
Change-Id: Ie7f0fa3751b46cca0132bd6dcada3628c6a45efb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8327
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Some GPIO pins are shared with (disabled) PCI bridge 0:14.4.
As our PCI subsystem currently does not configure PCI bridges that are
marked disabled, but remain visible in the hardware, we cannot mark 0:14.4
disabled in devicetree just yet.
Change-Id: Ibc5d950662d633a07d62fd5a5984a56d8e5f959d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8326
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
While we cannot recreate exact copies of PC Engines APU1 firmware images,
I shall upstream the vital changes for coreboot from the following tarballs
SAGE has published to meet GPL:
SageBios_PCEngines_APU_sources_for_publishing_20140405_GPL_package.tar.gz
md5sum: ce5f54723e4fe3b63a1a3e35586728d4
pcengines.apu_139_osp.tar.gz
md5sum: af6c8ab3b85d1a5a9fbeb41efa30a1ef
The patch here adds Kconfig, Makefile.inc and devicetree.cb files to
match 2014/04/05 release tarball config.h and static.c files.
Change-Id: Id61270b4d484f712a5c0e780a01fc81f1550b9ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8325
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Some GPIO pins are shared with PCI bridge 0:14.4.
As our PCI subsystem currently does not configure PCI bridges that are
marked disabled, but remain visible in the hardware, simply setting 0:14.4
disabled in the devicetree does not work here yet.
Change-Id: Ib9652e12a888e1d797d879d97737ba4101b7029a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8495
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
The goto statement skipped all the code that is necessary
to fill in the data structures that are read right after
the jump.
Since there doesn't seem to be useful data, why write these
ACPI objects in the first place?
Change-Id: I1d06c11a7a31517b81e54159355d5c27e3cc3735
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8507
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
xgifb_probe() doesn't own the object it tries to free
in its error code path, potentially leading to a
double-free in xgi_z9s_init().
Since we don't actually implement free, it doesn't matter
too much, but let's keep things proper.
Change-Id: I70c8f395fd59584664040ca6e07be56e046c80fc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8506
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The change in commit 5636237 allows */cpu/amd/agesa/* to be removed.
TEST: Booted the amd/parmer board.
Change-Id: I8d2d2639f8e5f3b1dd58be96be98db0eff7b268f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8505
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This copies a change made in commit 1cc3338 that allows alloc_cbmem()
to be called only in ramstage. This will allow the */cpu/amd/agesa/*
field to be removed from the list of illegal_globals EXCLUDE_FILEs.
TEST: Booted the amd/parmer board.
Change-Id: I2d4b5352815aae090ffce7b83e487f7c0a4d0c88
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
That's just how we roll.
Change-Id: I47ef62476703fdf2544d9cd77c30ae12452afeae
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8514
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If function cmos_init() was called with parameter invalid
set, this indicates, that the caller has found a power
loss event in the RTC registers. In this case, we need to
load the default date and time because it can be corrupted.
Change-Id: Ib8d58a14da0182ceb8167e67440a0f1ea2a20eb7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8373
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Fan 2 and Fan 3 were inexplicably set to zero after device
setup.
Change-Id: I37945745dbfaf33eb28808d85cdf75dca401e44b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8520
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Without this change the builder would fail with the complaint
that there was a global static variable in romstage. alloc_cbmem()
is only called in ramstage. The alternative was to add
*/cpu/amd/pi/*.romstage.o to the list of illegal_globals
EXCLUDE_FILEs in arch/x86/init/romstage.ld.
TEST: Booted the amd/lamar board.
Change-Id: I5167910ff790a3152a4ad8e5af0a4a3b17894f0f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8256
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds the AMD Family 15h model 30 CPU.
S3 suspend/resume currently is not supported.
Tested on the amd/lamar platform.
Change-Id: Ifef55747a5d715b17937fc75ab9d35945b59f0e6
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The coreboot I²C API was completely reworked in commit
* cdb61a6 i2c: Replace the i2c API.
For the allwinner I²C driver, wrappers to the old API were provided
on a "best guess" basis. Replace these wrappers with proper
transaction handling based on the i2c_seg API.
Change-Id: Ibdda3b022ce4876deb2906e17a5a0ca9e939aada
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8431
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Originally, axp209_(read|write) accessors relied on i2c_(read|write)
to return the number of bytes transferred. This was changed in
* cdb61a6 i2c: Replace the i2c API.
to return an error code or 0 on success. This caused the AXP209 check
to fail. Fix the accessors to account for this new behavior.
Change-Id: Ib0f492bd52260d224d87f8e8f2d3c1244d1507df
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8432
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
We only need one of devx and dev. This function should be called
with dev already adjusted if link_num > 3.
Change-Id: I7166bbb88143bc28802c9530c4da16db67868d8e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8351
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These settings are specific to the SteppeEagle SOC and should
be made in its northbridge code rather than the CPU code.
Change-Id: I1a231f95225e1414b0cbc026a2a7b7797bd91fca
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8254
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
They seem to have been copy-pasted during the backport from sandybridge.
Change-Id: I2277bb90e6da2676b31eb2665b7c15f074e3d4bf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8295
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
It's not very useful to try to link a host tool into
the bootblock image.
Change-Id: Id3b6496c061d41184fbb516d56746855b455b0c3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8473
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Note that the limit is not set in the devicetree.cb which use native
sandybridge raminit, as it is not needed. When that isn't set, it's
automatically set to zero, and when we find that, we automatically
return the default limit. Thus behavior isn't changed for any board.
Change-Id: I447399eea71355612b654710a56f3a0077c2f7f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8476
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We can successfully bring up systems if timC calibration fails, as has
been demonstrated with google/butterfly. As a result, do not die(),
but simply print a message and continue in the hope that we may be
able to boot.
Change-Id: I49ec80324f63b2d45ae8f61c5c26454acb9c232f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8475
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Builds with cbootimage.
BUG=None
BRANCH=None
TEST=build test
Original-Change-Id: I796f171031bacf17106878d4a554e8f1cbfe93f8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203145
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 4778ae4d08a25306407f0fd2fe47976d63463f9d)
Increase the bootblock area for the larger BCT that is generated by
the coreboot version of the cbootimage tool.
Change-Id: I42b8208504bf4936a9fa14f820d665590f6a3754
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8413
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Changes might be required for .bct files as we get to know more.
Pulling in files from mainboard nyan for now
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Change-Id: Iaf81a384af0469c77940cf7309ba68018110b5eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/203144
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d3633f8cf8c01a07b54ceef2dd7bf7a64afd7c76)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8412
Reviewed-by: Aaron Durbin <adurbin@google.com>
This patch is to perform software triggered RAM re-repair in
the warm boot path.
"RAM" actually refers to the CPU cache here (yeah, I know, but that's
how the manuals call it). This is some magic hardware thing that must be
done every time after applying power to the main CPU cores or their
cache may have random failures in some very rare cases.
Also, note that this file isn't built in coreboot proper, but is a
companion binary for kernel. It resides here for safe keeping.
BUG=chrome-os-partner:30430
BRANCH=nyan
TEST=run suspend_stress_test on nyan.
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: I540f8afbffa323d1e378cb6ba6a20be4afd08339
Original-Reviewed-on: https://chromium-review.googlesource.com/207422
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
(cherry picked from commit f06c413c42819f8f75d9b0fecde02b82583f1d2a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I151ce943ce8623e46cc55f890bbd6fc641cc2b98
Reviewed-on: http://review.coreboot.org/8416
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch is to perform software triggered RAM re-repair in
the cold boot path.
"RAM" actually refers to the CPU cache here (yeah, I know, but that's
how the manuals call it). This is some magic hardware thing that must be
done every time after applying power to the main CPU cores or their
cache may have random failures in some very rare cases.
BUG=chrome-os-partner:30430
BRANCH=nyan
TEST=run cold reboot test on nyan.
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: I87869431e80e7bc66948a7f67f35e5b907993765
Original-Reviewed-on: https://chromium-review.googlesource.com/207362
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
(cherry picked from commit d999f5ecc31d90c8dce1dd91533bc34ffd3c03f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iaee1d7f9fa8856f26d7ead70eaeeff9d80dbb181
Reviewed-on: http://review.coreboot.org/8415
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Based on TRM, cpu clock enabling and reset vector setting should
all be done properly before ungating cpu power partition. Otherwise,
with current code, a race condition could occur where cpu starts but
reset vector has not been set.
BUG=chrome-os-partner:30064
BRANCH=none
TEST=run nyan_big reboot test. No issue is experienced.
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: I571e128693bb2763ee673bd183b8cf60921dc475
Original-Reviewed-on: https://chromium-review.googlesource.com/206682
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
(cherry picked from commit 106480ff32406c899a24544fdfab858db5afd1d9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3da6018dd68e4c15d2c58db566a9745b0b26c365
Reviewed-on: http://review.coreboot.org/8414
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
All code must agree on PCI enumeration for the CK804 device,
define these only once. The definition in enable_usbdebug.c was
different and was assumed incorrect.
Change-Id: I7d25c145afbad41db81a6b9b4f3956ad50fcb9f2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8339
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This reverts commit b871687991.
Use of #ifndef here makes it error-prone and hides errors.
Change-Id: I13a999250c80adedb6b3fd4963a862ff106750f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8338
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This patch allows the user to set a maximum HT link frequency in
NVRAM, paralleling a similar option available in the proprietary
BIOS on some mainboards.
Change-Id: Iba3789262eefa52421e76533cbf14d9da2ef1de8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8462
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The existing code generated invalid ACPI processor objects
if the core number was greater than 9. The first invalid
object instance was autocorrected by Linux, but subsequent
instances conflicted with each other, leading to a failure
to boot if more than 10 CPU cores were installed.
The modified code will function with up to 99 cores.
Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8422
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
All settable memory controller options are now controlled by NVRAM,
making the Kconfig options irrelevant.
Change-Id: I9b2c8798d830e5c41bb9a108514e60d784d2ebc5
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8452
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
K10 processors cannot operate at full memory speeds when more than a
certain number of DIMMs are installed on a specific channel. The
allowed DIMM numbers and speeds are listed in the BKDG; this patch
implements the appropriate frequency reduction to ensure stability.
Change-Id: I8ac5b508915e423d262ad36c49de1fe696df2ecd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8435
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These values were originally hard-coded in the AMD MCT wrapper.
Change-Id: I12056d38d5348e70a44c192385e22e715e207792
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8454
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In specific configurations, such as homogeneous supercomputing systems,
changeable NVRAM parameters are more of a liability than a useful tool.
This patch allows a coreboot image to be compiled that will always set
the NVRAM parameters to their default values, reducing maintainance
overhead on large clusters.
Change-Id: Ic03e34211d4a58cd60740f2d9a6b50e11fe85822
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8446
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This fixes errors of the form:
error: 'Dct0MemSize' may be used uninitialized in this function
Change-Id: Ifc853aea9050994f5641c57a081aa0667331c995
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8455
Tested-by: build bot (Jenkins)
TEST: Boot with corrupted CMOS and make sure console level defaults
to SPEW, instead of 0, and that cbmem console is not empty.
Change-Id: I8ab2423e99bbe116f52ad27f4b20427d8557f6ff
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8379
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch allows the following memory controller settings to be overridden in NVRAM:
Memory frequency limit
ECC enable
ECC scrub rate
Change-Id: Ibfde3d888b0f81a29a14af2d142171510b87655e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8438
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Currently the coreboot console log contains messages in the following
form.
Show all devs...Before device enumeration.
[…]
Show all devs...After init.
Add a space after the ellipse, so it’s better readable and it does not
look like a newline is missing.
Show all devs... Before device enumeration.
[…]
Show all devs... After init.
Change-Id: Ifa2a37b8d60c433c219df7533a79fced03b6271a
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8424
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
The default linking behavior of ramstage was changed in commit
* 8f99378 ARMv7/Exynos: Fix memory location assumptions
However, that commit failed to address the issue of maintaining
linking behavior on non-Exynos chips. As a result we ended up
linking ramstage at address 0, which is outside of SDRAM.
Explicitly link ramstage at SDRAM base for A10. This patch does not
address the issue on other chips that were broken by commit 8f99378.
Change-Id: I90fa41d3eabf110b5ab24c31b78ac6d0474e4083
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
PCIe root ports on devices 0:15.0 to 0:15.3 should at first all
appear visible in hardware. The real configuration will be done by
vendorcode once we call sb_Before_Pci_Init().
Change-Id: I01a46c630aa6d55a94af45da6b78c97df7553e4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8387
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This has nothing to do with SATA controller. We only need to
fill the table with defaults before we parse devicetree for
changes to device configuration.
Change-Id: Ic4b28b5992ec9bfdf252f61b1c86b0162243cc95
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If devicetree.cb has GPP port off, really disable it before even
trying to do link training.
Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8385
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
A set of pins can be configured for GPIO or (parallel) PCI bridge use.
When requested configuration is 0:14.4 enabled, register programming
must be done before attempting to enumerate devices behind the bridge.
When requested configuration is 0:14.4 disabled, we must not even
temporarily enable pins for PCI use to avoid spurious GPIO state changes.
As our PCI subsystem currently does not configure visible PCI bridges
that are marked disabled, we cannot mark 0:14.4 disabled just yet but
need to handle pcengines/apu1 as a special case.
Drop related dead code.
Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These sb800_enable() messages without newline mess up the log.
Change-Id: I1689b68702e08e2a287083835f310f52f495c451
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8384
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Kconfig variable is not implemented.
Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Keep the slower HyperTransport configuration for a possible reference
in fam15 boards.
Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Aaron Durbin