Only some assembler files still have \r\n ... Can we move that part to C
completely?
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Interesting enough, console_printk was only used in a single place and
duplicated a large part of console.h which is included in the same place.
Thus, just drop console_printk.c and we're one down with console complexity
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5274 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Some other random warnings.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5268 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
CONFIG_CAR_FAM10 was renamed some time ago to
CONFIG_NORTHBRIDGE_AMD_AMDFAM10, and l3Cache() is actually defined as
l3_cache().
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Boot Tested (bootlog attached)
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5244 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
otherwise it will keeps reboot. The comment was also added in
detail to make less confusing when we debug SB600/SB700.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5240 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Makefile and Kconfig.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* PCIe initialization.
* Internal Graphics initialization.
* HT Link initialization. It works in HT1 or HT3 mode.
Note:
1. I tried to add the description of every step to the code. For example,
if it is made based on rpr, section 2.4.5, I will pasted the words
from 2.4.5 to the c code. But the document I worked with might be
different with the most updated one. A new section has been added and
the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I
correct every comment if I met one. But I have to confess that I am so
reluctant to find out everyone. I believe it will be correct in the long
run.
2. The interanl graphics part is done by Libo Feng <libo.feng@amd.com>.
3. There is a conflict between RPR and our CIM code. Please see the comment in
switching_gppsb_configurations in rs780_pcie.c.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* SATA initialization.
* USB initialization.
* HDA initialization.
* LPC initialization.
* IDE initialization.
* SMBUS initialization.
Note:
1. I tried to add the description of every step to the code. For example,
if it is made based on rpr, section 2.4.5, I will pasted the words
from 2.4.5 to the c code. But the document I worked with might be
different with the most updated one. A new section has been added and
the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I
correct every comment if I met one. But I have to confess that I am so
reluctant to find out everyone. I believe it will be correct in the long
run.
2. I only test the SATA port 0-3. The ports 4, 5 are "PATA emulations".
I am confused about it.
3. This patch is not only about SB700. Actually it should be
SB7x0. But I dont think it is nice to change everything to
SB7x0. It is ugly, isn't it. As far as I know, they all use the
same code with revision checking. If you guys think it is
appropriate, please modify it to sb7x0.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
fix some PCI IDs, enable USB bus mastering, add some license headers, ...
LPC code needs another look, but I think we're getting there.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5207 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Previously the sb600 setup was equivalent to clear_ioapic(), so that is what we will do for now.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Convert all DEBUG_SMBUS, DEBUG_SMI, and DEBUG_RAM_SETUP custom and
local #defines into globally configurable kconfig options (and Options.lb
options for as long as newconfig still exists) which can be enabled
by the user in the "Debugging" menu.
The respective menu items only appear if a board is selected where the
chipset code actually provides such additional DEBUG output.
All three variables default to 0 / off for now.
Also, drop a small chunk of dead/useless code in the
src/northbridge/via/cn700/raminit.c file, which would otherwise break
compilation.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reworked to still apply to trunk, added X86EMU_DEBUG (and make the x86emu/yabel
code only work printf instead of a redefined version of printk and
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is needed on the IP1000T to get VGA output. The VGA option rom will ask
through an SMI for hardware specifics (in form of a VBT, video bios table)
which the SMI handler copies into the VGA option rom.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5177 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
(chipset_bootblock_inc and chipset_bootblock_lds) instead of using
chipset specific rules for "bigbootblock" in the generic i386 Makefile.
It also adds rules for the romstraps of
* southbridge/nvidia/ck804
* southbridge/sis/sis966
* northbridge/via/vx800
for the benefit of both image layouts.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5175 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
cd coreboot/src/southbridge
svn mv i82801ca i82801cx
svn mv i82801dbm i82801dx
svn mv i82801er i82801ex
svn copy i82801xx i82801bx
svn mv i82801xx i82801ax
Plus, fixing up the filenames in these directories and the romstage.c and
Kconfig files of the mainboards using those drivers.
Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver.
There's a lot more to be done, like
- adding device IDs for the ICH3 and newer drivers that have been kept in
i82801xx so far
- drop the additional parts support from the ax and bx drivers.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
PS/2 keyboard API.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5152 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- drop include/part and move files to include/
- get rid lots of warnings
- make resource allocator happy with w83627thg
- trivial cbmem resume fix
- fix payload and log level settings in abuild
- fix kontron mptable for virtual wire mode
- drop some dead includes and dead code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5136 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Consistently use the same wording and formatting for all license headers.
- Remove useless whitespace, add missing whitespace, fix indentation.
- Add missing "This file is part of the coreboot project." where needed.
- Change "(C) Copyright John Doe" to "Copyright (C) John Doe" for consistency.
- Add some missing "(C)" strings and copyright years where needed.
- Move random comments and file descriptions out of the license header.
- Drop incorrect file descriptions completely (e.g. lpc47m10x/Makefile.inc).
There should be no changes in _content_ of the license headers, if you spot
such changes that's a bug, please report!
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Permit early setup of COM2
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
cache_as_ram_auto.c and auto.c are both called "romstage.c" now.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
GPIO lines 4 and 3 are swapped and also incorrectly put in IR mode receive (compound fault).
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Edwin Beasant <edwin_beasant@virtensys.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5060 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add appropriate Kconfig defines to provide 8mb of VGA ram allocation
Add the Kconfig defines to cover TSC calibration from TIMER2 and UDELAY setup
Two small warning removals about excessive prototyping.
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5059 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
from mainboards.
Some adaptations were necessary after the IOAPIC cleanup,
so this should fix the build.
Fix intel/d945gclf build, which was missing some ACPI component.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* change the code to use macros names instead of constants in many places
* SMI/ACPI: rework power-off code to work with old Linux kernels (2.6.12.x)
* SMI: Add support for mainboard GPI handler
* SMI: immediate power-off on power button press, if OSPM is not active
* Add fix for some USB errata
* Some register tweaks for mobile systems
* Enable configure SCI on interrupt 9 correctly.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5026 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
of components. This patch is a rewrite of the generic IOAPIC setup code.
Additionally it drops the other 12 instances of IOAPIC setup code and
makes the components use the generic code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
read32(unsigned long addr) vs readl(void *addr)
and
write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr)
read32 was only available in __PRE_RAM__ stage, while readl was used in stage2.
Some unclean implementations then made readl available to __PRE_RAM__ too which
results in really messy includes and code.
This patch fixes all code to use the read32/write32 variant, so that we can
remove readl/writel in another patch.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* drop debug.c files from 945 mainboards (and share it in the northbridge code)
* adapt the mainboard and auto.c files for above changes.
Rather trivial
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5016 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This patch also aligns the configuration of a couple of
boards more closely to what newconfig does.
Also, the romstrap inc/lds files are declared in the
Makefiles of the southbridges they belong to, instead of
some global file.
AMD CPUs have their own timer functions, so disable UDELAY_IO
for them and set HAVE_INIT_TIMER as appropriate, same for
emulation/qemu-x86.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Set __PRE_RAM__ define per default
- Properly handle ignored (#ifdef'd out) #include lines
amd/serengeti_cheetah_fam10:
- write ACPI files to $(obj) instead of the top dir (alias $(CURDIR))
tinybootblock:
- provide a way to define code that should be added to the bootblock,
to map the entire ROM for use by CBFS
amd/model_fxx, amd/model_10xxx:
- add CONFIG_SSE
walkcbfs.S:
- eliminate the use of two registers, to make space for romcc to wiggle
amd/serengeti_cheetah_fam10:
- use the enable_rom framework. not entirely functional yet
Boot-tested on emulation/qemu-x86
Build-tested on amd/serengeti_cheetah_fam10
amd/serengeti_cheetah_fam10 fails in amdht/ somewhere, but builds
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
which is normally set to 0x10 (the current default) and set to 0x80 (the current alternative)
where necessary (if romstraps get in the way).
For Kconfig, the special case is set per southbridge (as these define the necessity for this
workaround), for newconfig it's added to each single board.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
now handled more generically using CBFS.
Simplify the option ROM code in device/pci_rom.c, since there are only two ways
to get a ROM address now (CBFS and the device) and add an exception for qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Since we have CBFS setting rom_address in board files is no longer
necessary.
Also, drop vga_rom_address from RS690 completely, it was never used
in the code.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4923 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
__ROMCC__ now means "Don't use prototypes, since romcc doesn't support them."
__PRE_RAM__ means "Use simpler versions of functions, and no device tree."
There are probably some places where both are tested, but only one is needed.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Declare superio functions to be static and remove duplicates.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4890 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add static and const where possible.
- Turn some #warning entries into TODO comments.
- Add missing prototypes.
- Remove unused variables.
- Fix printf arguments or cast them as needed.
- Make sconfig output look better. Drop useless "PARSED THE TREE" output.
- Print "(this may take a while)" while building romcc. Add missing "\n".
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watosn <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4874 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
TODO
- x86emu need (imo) some common header with prototypes at least
- clog2, ulzma, hardwaremain prototypes added by this patch probably should
be moved to some header too.
- in src/devices/device_util.c prototype is before function because seems,
it is used only within same file, if not it should be moved to debug
section of prototypes in include/device/device.h
Signed-off-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4871 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- run ACPI code through preprocessor so we get the same values
as the C code
- fix PCIe x16 slot
- fix ICH7 Azalia/HDA driver
- SMI/GNVS update security fix (only allow struct pointer update once)
- ACPI updates
- IDE driver fixes
- add cmos options for disabling onboard ethernet and controlling system fan
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4861 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ppc port, some ambiguous use of CONFIG_IDE and an unused ide driver (we dropped
the filesystems already to be used with it) (somewhat trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Change HAVE_FAN_CTL to be specific to the SuperIO that supports it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4809 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
VGA ROM can not run. After make, run
> ./cbfs/cbfstool ./coreboot.rom add ../vga_bios.rom pci1002,791f.rom optionrom
to make the final image with vga bios.
The macro vga_rom_address is out-of-date when CBFS starts play its role. it also should
be eliminated from rs690/chip.h as below. But it will cause building error on other board, which I
cant make test on.
## Index: src/southbridge/amd/rs690/chip.h
## ===================================================================
## --- src/southbridge/amd/rs690/chip.h (revision 4782)
## +++ src/southbridge/amd/rs690/chip.h (working copy)
## @@ -23,7 +23,6 @@
## /* Member variables are defined in Config.lb. */
## struct southbridge_amd_rs690_config
## {
## - u32 vga_rom_address; /* The location that the VGA rom has been appened. */
## u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */
## u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */
## u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */
##
Don't apply above patch about rs690/chip.h before every board has been fixed.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to build, but by default all the tables that are available are built.
Make PIRQ table build for qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Reset the s2891 so the HT speed gets updated.
Remove some PANTA comments.
Add SATA init from non-CAR version.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
There is an i2c mux out there. We found it using a user level program
that, as usual, began by inverting all gpios until we found out
what we needed to know. In the end, we just set up the GPIOs as
the factory bios does.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4755 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use "default n" for all components that shall be "select"ed.
- Use "0x0" instead of "0" for hex variables for clarity and to reduce
the risk of people passing integer instead of hex values to such variables.
- Add TODO comments for boards that have irq_tables.c but don' set
CONFIG_HAVE_PIRQ_TABLE = 1. Someone with the hardware should test enabling.
- ASUS M2V-MX SE doesn't have irq_tables.c so don't define
IRQ_SLOT_COUNT in its Kconfig file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4749 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
their own vgabios.c
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
in very early stages, otherwise the boot may hang like this because
the CBFS headers cannot be found/accessed:
Uncompressing coreboot to RAM.
Jumping to image.
Check CBFS header at fffedfe0
magic is ffffffff
ERROR: No valid CBFS header found!
CBFS: Could not find file fallback/coreboot_ram
Jumping to image.
This patch enables full ROM access on all 440BX boards right after the
serial init (and before CBFS headers are parsed).
Build-tested and runtime-tested on ASUS P2B-F.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4721 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Both were only really used in pre-cbfs, as the payload's size isn't
relevant for the build process anymore.
Various calculations in {no,}failovercalculation.lb are adapted
accordingly.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- northbridges are done
- southbridges are done
- Intel CPUs are done, with a design that the board only has to specify
the socket it has, and the CPUs are pulled in automatically. There is
some more cleanup possible in that area, but I'll do that later
- a couple more mainboards compile:
- intel/eagleheights
- intel/jarrell
- intel/mtarvon
- intel/truxton
- intel/xe7501devkit
- sunw/ultra40
- supermicro/h8dme
- tyan/s2850
- tyan/s2875
- via/epia
- via/epia-cn
- via/epia-m
- via/epia-m700
- via/epia-n
- via/pc2500e
(PPC not considered, probably overlooked something)
All of them only _build_, but some options are probably completely
wrong. To be fixed later
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE.
src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific.
src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config.
src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config.
src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory.
src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4657 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
kconfig_s2892.dif: Add support for Tyan s2891, s2892, and s2895 to Kconfig.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4656 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
write. It boots the SB/NB V-link performance to full duplex 533MB/s. (in fact x2
for FDX)
The default was 266MB/s but half duplex only. If you encourage any stability
issues we need to look into fine tuning the bus. The values are VIA recommended.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4625 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
tested. I also addressed questions raised by Uwe:
TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
UDELAY_TSC
Are now defined as booleans in src/cpu/x86/Kconfig and can be selected in
the mainboard Kconfig. The remaining question of Uwe's is a deeper
problem:
---
We'll have to check if this works. From a quick glance
the Rumba does not have the mmx related lines (which _are_ in
Makefile.romccboard.inc, though):
crt0-y += ../../../../src/cpu/x86/fpu/enable_fpu.inc
crt0-y += ../../../../src/cpu/x86/mmx/enable_mmx.inc
crt0-y += auto.inc
crt0-y += ../../../../src/cpu/x86/mmx/disable_mmx.inc
---
We're going to need a whole variant of this standard mainboard OR
we're going to have to make (some) of the unconditional includes above
conditional.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4618 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This patch tries to improve the pcie portA configuration.
The Matrox G550e PCIe gfx card shipped along with the dev board is supported.
Signed-off-by: Arnaud Maye <arnaud.maye@4dsp.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It also brings in the vsm from v3, which was a much cleaner cut.
Over time, I hope to bring all the code back from v3. I have
some rumbas at home and want to use them.
I have a patch which comes in next that makes the rumba build.
Note that I am holding the src/*/amd/Kconfig patch until these get merged.
These have no impact on the current system.
Note that this is not complete but I want to fill in the blanks bit
by bit.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4611 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
