Typically we set SaOcSupport to allow overclocking RAM, but addw2 saw a
high rate of errors when using the provided 3200 MHz DIMMs. Disable OC
so modules run at the standard 2933 MHz.
Change-Id: I469b9c73d2e6bfa0b3c9175bcc87584aeaa95f75
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Perform a codec reset to match all other System76 boards.
This applies commit 705ebbea04 ("mb/system76: Reset Realtek codec
before configuring") to boards that were added later.
Change-Id: I618cc042f1803d07bfc067d1999e1c44ab4a1fa9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Users report having the touchscreen as a wake device causes many
spurious wakeups due to proximity to the keyboard when the lid is
closed, so remove it as a wake source.
TEST=build/boot google/glimmer, observe no unintended wakeups when
the lid is closed.
Change-Id: Id16cabcd21afa0b373ecddd9eb3b0b8befb71576
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76794
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This matches the change done for DDR4 in commit 8509c25eec
("soc/intel/alderlake: Allow channel 0 for memory-down").
Fixes detection of the on-board RAM (Samsung M425R1GB4BB0-CQKOD) on the
System76 Lemur Pro 12 (Clevo L140AU). The Clevo L140*U are the only
boards in the tree using mixed memory topology.
Change-Id: I395f898472a9a8f857fd6b0564b95c787b96080b
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Set the ACPI SSID using Google's project campfire ID for EVE, to allow
coolstar's Windows drivers to identify the device (since it uses a
generic ACPI _HID). Custom drivers are necessary under Windows since
the touchpad firmware is not fully I2C-HID compliant.
TEST=build/boot Win11 on google/eve, verify touchpad fully functional.
Change-Id: I3b8d56ff01d4cca7ba5c02f1aaab1a7049607dbc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
CB:73353 switched ADL boards from using S0ix to S3. DevSlp can be
reenabled now as it no longer breaks suspend.
Change-Id: I618696833b7ed02e49c35d06021b730be91d879e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
System76 EC since system76/ec@99dfbeaec3 sets PL4 values through PECI
based on AC state for all boards. Remove the static PL4 value from
coreboot since it won't be used.
Change-Id: I2bc37f12aab11910b4fe029efcee891a93257529
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Do not reconfigured LSX0 so that the FSP values are used.
Change-Id: I76e2ab01a5e853e3c1ac78b471ea0aa87d703d52
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76751
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EAPD pin needs to be enabled and set in order for the headphone
jack to work properly. It's already done for the speaker in the
beep verbs, but needs to be done for the HP jack as well in order
for output to work properly under Windows.
TEST=build/boot Win11 on LINK, verify headphone output functional
when headphones plugged in.
Change-Id: I411d7317aefc1154635c4c17ca0dc1e37c9f40f4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76746
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the pirrha variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:292134655
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_PIRRHA
Change-Id: Idc0a4dbb467cbdb91a5ed55c5e0a9e898e775b11
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76768
Reviewed-by: SH Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EC serial port on these devices is not accessible to the end user
and exposing it to the OS via ACPI serves no purpose. Debugging over
the EC serial port (via the servo interface) does not require the
ACPI exist. Drop it since it's not needed and serves no purpose.
TEST=build/boot Win11 on auron/link/slippy, verify Windows Device
Manager no longer shows an unusable COM port.
Change-Id: If453bfca8e094aa06043293bdf91a40c38cc7866
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76793
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Id0baf970dbe94a8ebf75f8dbabc6abe345d1c454
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I03c21e180e9e399e5cb451bf3b9cfb6484cab68b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76778
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I00807a435a21e078c89f797cfd0b00d03604ea0e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76786
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The non-PCI resources added to the domain device are resource consumers,
so they mustn't be reported as resource producers. To make sure that
this is the case, skip all resources that have the IORESOURCE_RESERVE
flag set in amd_pci_domain_fill_ssdt.
Commit 7a5dd781d1 ("soc/amd/common/data_fabric/domain: provide
amd_pci_domain_fill_ssdt") that introduced amd_pci_domain_fill_ssdt
already contained the bug, but since no MMIO range consumers were added
back then, the bug only became visible when commit 32169720bb
("soc/amd/common/data_fabric/domain: report non-PCI MMIO resources")
added the reserved non-PCI MMIO resources to the domain device's
resources resulting in MMIO producer objects being generated for MMIO
consumers. Those producers that should have been consumers then
overlapped with the actual MMIO resource producers which caused Windows
to BSOD with an ACPI_BIOS_ERROR.
TEST=The non-PCI MMIO resources are no longer added as resource
producers and Windows boots again on google/frostflow.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: Ib099675bc5bea93bf7c2a80f741bef067fd37a58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
When iterating over the resource list in amd_pci_domain_fill_ssdt, don't
return when a resource is unassigned, but just continue to the next loop
iteration so the resulting SSDT will be complete and not broken due to
a missing resource template footer and the scope not being closed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I39fe516f27a6d971fb9c57a1e64ead79d23aff08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I80b4b2df4a38dcbb28d928018446e91acae90ee6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3d716b29d8e28584a0c9e4056d4c93dca2873114
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76780
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: If31cbc5ae184c4eb66011666c1bb655fa16afba0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Ia1d597c0e3e86db8c13829e58a8a27d9de1480b4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76788
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I52b5a83e7e484889bfef5a4e45a0279fadd58890
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I495605190b2c6cd11c7f78727ab4611e10b4d9d3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I53ffa4b35d35d4f8b0170377041b258d4bd2eeeb
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76777
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iea63e7ce165b1c8129725136e39bff45765023e6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I688bef264ff41b2a9755133698880fa397f652d4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76755
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 49d8aa7043 ("soc/amd/common/block/psp: Unmap EFS region after
use") removed the 'efs_is_valid' function but left the function
signature in the header file.
TEST=stoney/picasso/cezanne/mendocino/phoenix builds
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib596946679b50be63868af57e3428b4d65845419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76750
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Introduce new parsing rules for ux_locales.c:ux_locales_get_text():
* Add a version byte: PRERAM_LOCALES_VERSION_BYTE in the beginning. This
provides more flexibility if we want to change the format of
preram_locales region.
* Add a new delimiter 0x01 between two string_names. This could fix the
issue that 'string_name' and 'localized_string' might be the same.
Also fix two bugs:
1. We would search for the language ID exceeding the range of current
string_name.
2. In 'move_next()', we would exceed the 'size' due to the unconditional
increase of offset.
Finally, make some minor improvements to some existing comments.
BUG=b:264666392, b:289995591
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: Ic0916a0badd7071fa2c43ee9cfc76ca5e79dbf8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Lower the TCC Offset by 10 degress.
Change-Id: Ib80d3b73c41ec1196d8294c35b43333e0df218d5
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76374
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the SSID to allow the correct Creative Labs Windows audio drivers
to attach (vs generic HDA audio ones) and provide full functionality.
Linux doesn't care about the SSID, so changing it has no effect there.
TEST=build/boot Windows, Linux on google/link, verify the correct
audio drivers attach under Windows, no regressions under Linux.
Change-Id: Ib5e523b07583289b0222ef156245fb0771ad1f1c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76745
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1e75f29a52179b72b25092f0ffdfd91a182d6648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This address is more certain to not collide with other symbols.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I02eddf43a00c443a1193d6db77d6fad3715216f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Without FSP we assume TSEG is right above CBMEM.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8700803617c3fe4890e497c6d7b94f1d36e21cb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76472
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Factor out the common FSP-specific code to get the location and size of
the SMM region from the HOB that FSP has put into memory. This moves
FSP-specific code out of the common AMD SoC code into the FSP-specific
common AMD SoC code folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie137bb0f4e7438a1694810ae71592a34f9d8c86e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76760
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Factor out the common FSP-specific code to report the usable and
reserved memory resources read from the HOBs that FSP has put into
memory. This both reduces code duplication and also moves FSP-specific
code out of the SoC code into the FSP-specific common AMD SoC code
folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib373c52030209235559c9cd383f48ee1b3f8f79b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76759
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Set GPP_C6(TCHSCR_REPORT_EN) and GPP_C7(TCHSCR_INT_ODL) to NC for
non-touchscreen sku.
BUG=b:283199751
BRANCH=firmware-nissa-15217.B
TEST=build and boot to ChromeOS
Change-Id: Ie062eef24f640c3d6c4a0b4c77792e57ac3a722c
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Uldren will support internal fivr in next phase and using fw_config to
decide the board with internal or external fivr.
BUG=b:287379760
BRANCH=firmware-nissa-15217.B
TEST=boot to ChromeOS, cold reboot/suspend/recovery mode/install OS
work normally.
Change-Id: I8a1ac60f599f2895654946d9fa1c4e1f2657fd10
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1) LP5 Memory - 2GB Micron MT62F512M32D2DR-031 WT:B
2) LP5 Memory - 2GB Hynix H9JCNNNBK3MLYR-N6E
3) LP5 Memory - 4GB Samsung K3LKBKB0BM-MGCP
4) LP5 Memory - 4GB Hynix H9JCNNNCP3MLYR-N6E
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 1 (0001)
H9JCNNNCP3MLYR-N6E 2 (0010)
BUG=b:292461498
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I02e49d60e43c4fed8356556ec194d726c30cd609
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
The patch disables PCH USB2 Phy power gating to fix display flicker
BUG=b:292403156
TEST=Verified on the defeat board
Change-Id: If0c0e655c5d32f39b90635bb3c1d13d8b6993b59
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Update Touchscreen GPIO to use the correct GPIO 90. GPIO 32 was a
copy/paste from dalboz and corresponds to the FP PWR EN on trembyle
platforms.
BUG=b:292656388
TEST=build/boot morphius
Change-Id: Ia6cdbe9195535093e68dbafedaddb70aaf73da88
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76747
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Set the cs_pi_start_high_in_ect if the DUT is using one of the two
following Hynix parts: H54G56CYRBX247 and H54G46CYRBX267. Failure to
set cs_pi_start_high_in_ect when using these parts will result in an
MRC cache failure and DUT will fail to boot.
BUG=b:292153199
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot brya
variant to kernel.
Change-Id: I36040139b959c85c3ac220a34574caa12ca6c5fe
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
With currently set default PSP_SOFTFUSE_BITS for phoenix SoC,
the non-serial build does not boot on Myst.
Override PSP_SOFTFUSE_BITS by disabling SPIConfig to also get
the non-serial build booting.
The documentation of PSP_SOFTFUSE_BITS is available in #55758 doc (NDA).
BUG=b:292489356
TEST=Flash image-myst.bin, verify that it's able to boot on Myst
proto0.
Change-Id: Id4472fd85fdefcafb8378199dbaa054fab8b3274
Signed-off-by: Konrad Adamczyk <konrada@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76713
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Necessary to allow coolstar's Windows touchpad driver for this board,
since the touchpad is attached to the SMBus. The VID/DID combo used is
not registered/doesn't conflict with any currently in use, and would
be difficult to change at this point since the Windows drivers have
already been signed.
TEST=build/boot Win11, Linux on butterfly/lumpy/parrot, verify
touchpad driver works properly.
Change-Id: Ica3756e117fc58166958f37e7b007abb79d9d350
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76744
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Necessary to allow coolstar's Windows touchpad driver for this board,
since the touchpad is attached to the SMBus. The VID/DID combo used is
not registered/doesn't conflict with any currently in use, and would
be difficult to change at this point since the Windows drivers have
already been signed.
TEST=build/boot Win11, Linux on butterfly/lumpy/parrot, verify
touchpad driver works properly.
Change-Id: Ie1d882cac90211541a636d2dab297c343a12d66d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76743
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Necessary to allow coolstar's Windows touchpad driver for this board,
since the touchpad is attached to the SMBus. The VID/DID combo used is
not registered/doesn't conflict with any currently in use, and would
be difficult to change at this point since the Windows drivers have
already been signed.
TEST=build/boot Win11, Linux on butterfly/lumpy/parrot, verify
touchpad driver works properly.
Change-Id: I61912fd6db9eb4b8d202ab633b8c7ca5913e759f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for redrix board. Please refer Intel doc#723158 for
more information.
BUG=b:292435264
TEST=build and boot redrix
Change-Id: I34d10c763f4710d2c5678704320fd1cc8d8b6287
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76670
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Camera LED will blink several times as sensor is being probed during
kernel boot.
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
BUG=b:292173903
TEST=Build and boot on Yavilly EVT unit. Verify & observe Camera LED
blinking behavior.
Change-Id: Ic3e3439dc9313325189761b277e1a3bd1c1d9418
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76671
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On the mobile SoCs, SMN_IOHC_MISC_BASE_13B1 is the only IOHC misc base
address, but on for example Genoa it's the address of the IOHC misc base
of the second IOHC. Due to it not being the first one on Genoa, use 13B1
as part of the name instead of using an index of 0 which would look odd
in the Genoa case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1db28ec03a3ba1c2040d8a1500ae17aa9705f6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76756
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
These boards do not actually support RTD3. The power GPIOs for
components are connected to 3.3V and the reset GPIO is connected to
`PLT_RST#`.
Change-Id: Id5e318c388f669d6b2935dc98ae29485955e6e72
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
After switching to S3, it was found that drives on the SATA port do not
exit D3cold on S3 exit. Disable RTD3 on the port until the issue can be
resolved.
Avoids the following error in Linux:
pcieport 0000:00:1d.0: Unable to change power state from D3cold to D0, device inaccessible
Tested on darp8 with a Samsung 970 EVO or Crucial P5 in J_SSD1.
Change-Id: Ib26f59db61acfbf9248cea379c197765d3d9c470
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76593
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the per PCI root IOAPIC is now reported as domain MMIO resource
and the IVRS code now again probes for the IOAPIC resource on the domain
device, the IOAPIC resource doesn't need to be reported as resource of
the northbridge PCI device any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8604bd321ec4239076b1be99dca095e47f8b75a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76600
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This reverts commit e33d253793 ("soc/amd/common/block/acpi/ivrs: fix
missing IOAPIC[1] error").
Now that the per PCI root domain IOAPIC MMIO resource is reported on the
domain device, we can again probe the resource on the domain device
instead of the northbridge PCI device in that domain. This will make the
IVRS code compatible again with the work in progress Genoa SoC support.
TEST=Linux doesn't complain about the IOAPIC[1] missing in the IVRS on
Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib861b19d798fc8ee6603e8803d8d1939be08d275
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76659
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Call read_non_pci_resources from amd_pci_domain_read_resources to tell
the resource allocator about the non-PCI MMIO regions within the data
fabric MMIO regions so that the allocator won't place any PCI MMIO in
the same areas.
TEST=On Mandolin 3 new non-PCI resources get reported to the allocator:
avoid_fixed_resources: DOMAIN: 0000 04 base fd100000 limit fd1fffff mem (fixed)
avoid_fixed_resources: DOMAIN: 0000 05 base fd000000 limit fd0fffff mem (fixed)
avoid_fixed_resources: DOMAIN: 0000 20000120 base fec01000 limit fec01fff mem (fixed)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7f69b86e376e3368d4f156ccf93791cc00886489
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add the SoC-specific non-PCI MMIO register list. PPR #57254 Rev 1.52 was
used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I29b4ef947776ab8a6c215c1a5204769a9f61e6fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add the SoC-specific non-PCI MMIO register list. PPR #57019 Rev 3.05 was
used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6f57df6ca09f1583409f6c4e68177b05b9f31def
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76597
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the SoC-specific non-PCI MMIO register list. PPR #57243 Rev 3.02 was
used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c5173e596f3f3f1c63165871178dbbd0e9641be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76596
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add the SoC-specific non-PCI MMIO register list. PPR #56569 Rev 3.04 was
used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id99c64c172481984306814980a1ddf0b2d535413
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add the SoC-specific non-PCI MMIO register list. PPR #55570 Rev 3.18 was
used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If7bfcdd9b70b71fe6aedcab3694698967d48e18e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Introduce the common read_non_pci_resources function to read the base
address of the non-PCI resources within the MMIO regions configured in
the data fabric registers and pass that info to the resource allocator.
Each SoC will need to provide implementations for get_iohc_misc_smn_base
and get_iohc_non_pci_mmio_regs in order for read_non_pci_resources to
know the SoC-specific base addresses, register offsets and MMIO region
sizes. In case of SoCs with only one PCI root domain, the domain
parameter of get_iohc_misc_smn_base will be unused, but in the case of
SoCs with more than one PCI root domains, this parameter will be used by
the SoC-specific code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If9aca67fa0f5a0d504371367aaae5908bcb17dd9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add bank locator and slot existance to the mainboard code.
TEST: Verified on Linux that all slots show in dmidecode -t 17.
Change-Id: I4ced36e26368d3f99a7341cb55a8deb118b2d1a4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Set AllowedSocketsInParallel to 1 for RMT builds.
This help in associating any failures encountered during RMT run
with the corresponding Socket/MC/DIMM.
Intel recommended setting EnforcePopulationPor to 1 for RMT runs
for debugging failures if any.
Change-Id: Ie2301368e9470cc23171c3c4eca9fe978e1513d4
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76679
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The SuperIO is not used so don't enable decoding of 0xE2 and
drop all code using it. It's not even required for the virtual
UART on 0x3f8 to work.
Add the virtual UART on 0x3f8 as ACPI device.
TEST: Verified on SBP1 that serial still works.
Change-Id: I8e431a0c8417435cc6e3ba16f97ff080e1656a7b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add pujjo new supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Hynix H58G56BK7BX068
2. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT
3. Micron MT62F1G32D2DS-026 WT:B
BUG=b:292452868
TEST=Use part_id_gen to generate related settings
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ia123a1cfd93a5e08ab0ba65f1d9be240d60ff356
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76672
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch creates a new variant screebo4es.
The new variant will support only ESx samples. The existing rex
variant will support the QS samples.
BUG=b:292280656
TEST=Able to build google/screebo4es board and boot on target
hardware.
Change-Id: If77b4a773bee3633008d39c1886b61869c9618de
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Do not add type 0x63 entry to amdfw.rom when APOB_NV cache is disabled.
BUG=b:290763369
TEST=boot birman multiple times with/without APOB_NV cache enabled
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iefe6f56d7dbedd289680f25a5f372eaa12e967b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76568
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable the APOB cache for only Myst, and re-enable APOB for other
Phoenix SOC mainboards.
BUG=b:290763369
TEST=verify APOB cache is disabled
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie611e0b84611b2f50c989c75612fc2186b2dbfdf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76567
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add Kconfig option to disable the non-volatile APOB cache for a
mainboard using an SOC that supports APOB.
BUG=b:290763369
TEST=verify APOB cache is disabled when selected
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I0170355bbf29ea6386fa69a318e61f057b9a9a3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76566
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Mapping to the fw_config of AUDIO_AMP in dedede,
and set new AUDIO_AMP configuration of ALC5650 as value 4.
BUG=b:284060672
BRANCH=dedede
TEST=build pass
Change-Id: Ic3dccd09d3ba1619cce2ac0d5f123badbeeaccdc
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch increases the `tcc_offset` to reduce the TCC
(Thermal Control Circuit) activation temperature to avoid running
into abrupt power off during power cycle tests.
On Intel processors, the core frequency can be by an HW agent when
the current temperature reaches the TCC activation temperature.
The default TCC activation temperature is specified by MSR_IA32_TEMPERATURE_TARGET (which is 90°C for google/rex variants).
However, this patch adjusted the TCC by specifying an offset in
degrees C (i.e., using `tcc_offset` from variant override device tree).
Note: The bigger the TCC offset is, the lower the effective TCC activation temperature would be, to ensure that processors can be throttled earlier before the system critical overheats.
BUG=b:283008762
TEST=Able to perform power cycle on google/screebo w/o any crash/shutdown.
Change-Id: Ib19703877dbbfc26b2d9f538dda4f10c27cf872d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76658
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Hook the PchHdaSdiEnable UPD so that mainboard can change the
settings via devicetree. PchHdaSdiEnable UPD enable HDA SDI lanes.
BUG=b:268546941
TEST=Verified the settings on google/brya using debug FSP logs.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I82bbfa5442936aefa53f8826e395b7ce75c895a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:290985698
BRANCH=firmware-volteer-13672.B
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I87173f93d0e47baa816d15dad0777007342b4fdb
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Choose BOARD_GOOGLE_MODEL_REX while setting up the default config value
for variants created using google/rex model.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I107f4e375b5c9e9c0fb80c4d396164c10c1fc1e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch creates a new variant rex4es. The new variant will support ESx samples. The existing rex variant will support the QS samples.
BUG=b:290732344
TEST=Able to build google/rex4es board and boot on target hardware.
Change-Id: I25dd1f42ee812f47289da0c2ef7aa79d6f340d48
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch creates a rex model so that other variants developed using
`rex` baseboard are easy to land without duplicating the config
selection.
So far, `rex0` and `rex_ec_ish` are developed using the `rex` model.
The plan is to extend the support for `rex4es` and `rex4es_ec_ish`
variants.
TEST=Able to build and boot google/rex.
Change-Id: Id4e8d1162da93b7266ee1108f870e89b6d884ab9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76608
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
acpi.c contains architectural specific things like IOAPIC, legacy IRQ,
DMAR, HPET, ... all which require the presence of architectural headers.
Instead of littering the code with #if ENV_X86 move the functions to
different compilation units.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I5083b26c0d4cc6764b4e3cb0ff586797cae7e3af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
With arm64 -Wstack-usage= is enabled which is triggered on any use of
alloca(). Since this function basically works on x86 without wrecking
things and causing massive stack consumption it's unlikely to cause
problems on arm64.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I5d445d151db5e6cc7b6e13bf74ce81007d819f1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76007
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
SoC family is able to provide SoC-specific information
via amd/fsp/<soc_family>/soc_dmi_info.h.
Use common amd/fsp/common/dmi_info.h for all AMD platforms.
This way, duplicated dmi_info.h files in
vendorcode/amd/fsp/<soc_family>/ can be removed.
BUG=b:288520486
TEST=Dump `dmidecode -t 17`.
Change-Id: I5e0109af51b78360f7038b20a2975aceb721a7d5
Signed-off-by: Konrad Adamczyk <konrada@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76107
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AGESA S3 restore needs to occur before SMM finalization/locking,
but it's a crapshoot as to which runs first since both use the same
BS_OS_RESUME/BS_ON_ENTRY boot state callback, and there's no way
to prioritize/force ordering.
To work around this, move the AGESA S3 resume call to the preceding
boot state (BS_OS_RESUME_CHECK) to ensure it runs first, and guard it
to ensure it only runs on the S3 resume path.
BUG=none
TEST=build/boot google/liara, verify S3 resume successful.
Change-Id: I765db140c6708a0b129f79fb7d3dc8a4ab3095bd
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76592
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Follow baseboard Rex to make GPIO changes
BUG=b:286187821
TEST=Ability to enable and disable WIFI function in OS.
Change-Id: I805ce859c42c7c0a9d117418a80555658f844e09
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76551
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Add smn_read64 which calls smn_read32 twice to read two adjacent 32 bit
SMN registers and merges the results into a 64 bit value which it then
returns.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib2d58ec9818559cbefd7b819ae311ad02fafa18f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This supports a brand new I2C driver that is designed specifically
for the Pixel 2013 chromebook (LINK). The GMBus interface on the IGPU
is an i2c-compatible interface, but AFAIK only Link has touch devices
attached in this way.
On Windows, the PCIe device for the IGP is owned by the Intel
proprietary driver, hence a separate ACPI device has to be added for
the I2C driver arbitrator to attach to. The MMIO method is used instead
of _CRS so that Windows does not try to assign ownership of the
resource to our device (even though we're using the MMIO registers at
the same time as the IGP driver).
Even though in theory 2 drivers accessing the same MMIO may cause
problems, in testing, there has been no issues with
sleep/wake/hibernate, updating/installing/uninstalling the IGP driver,
or changing display resolutions with the i2c driver attached.
The arbitrator is necessary as well, since even though there are
multiple i2c buses, the MMIO registers are shared. Hence a shared lock
is required for i2c access across the buses.
The original Sleep Button devices are preserved for Linux due to the
completely custom and non-standard implementation of the Windows driver
in order to work around the non-standard nature of Link's hardware.
Change-Id: If7ee05d15bc17d335cf8c1a8e80bea62800de475
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Now that we have x86 architecture specific VGA_MMIO_* defines in
arch/vga.h, use those instead of having SoC-specific defines for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77b914d563bdc83e7fad7d7fccd5cf7777cb4918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
From the Linux documentation (Documentation/PCI/acpi-info.rst):
[6] PCI Firmware 3.2, sec 4.1.2:
If the operating system does not natively comprehend reserving the
MMCFG region, the MMCFG region must be reserved by firmware. The
address range reported in the MCFG table or by _CBA method (see Section
4.1.3) must be reserved by declaring a motherboard resource. For most
systems, the motherboard resource would appear at the root of the ACPI
namespace (under \_SB) in a node with a _HID of EISAID (PNP0C02), and
the resources in this case should not be claimed in the root PCI bus’s
_CRS. The resources can optionally be returned in Int15 E820 or
EFIGetMemoryMap as reserved memory but must always be reported through
ACPI as a motherboard resource.
So in order for the OS to use ECAM MMCONF over legacy PCI IO
configuration, a PNP0C02 HID device needs to reserve this region.
As no AMD platform has this defined in DSDT this fixes Linux using
legacy PCI IO configuration over MMCONF. Tianocore messes with e820
table in such a way that it prevents Linux from using PCIe ECAM. This
change fixes that problem.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I852e393726a1b086cf582f4d2d707e7cde05cbf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75729
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to reduce S0ix resume time, decrease stop_delay_ms from
300ms to 200ms for Goodix GT7996F. The value source is from
https://partnerissuetracker.corp.google.com/issues/285999032#comment16.
BUG=b:285999032
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and touchscreen is workable.
Change-Id: I2f0adadbd3d0774da03338cc0abd1639104876d9
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76577
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There is a problem of screen shake on the old panel[1]. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code is
mainly adjusted for GOP timing. When Display sleep in, raise all GOP
signals to VGHO and then drop to GND. In order to be consistent with
the current panel model, let's rename this file.
[1]: INX old panel product number is HJ110IZ-01A-B1, and the new
panel product number is HJ110IZ-01A-B2. We have recalled the shipment
old panel.
BUG=b:270276344
BRANCH=trogdor
TEST= test firmware display pass
Change-Id: I2b2534afee1ed700c39d3c360aafd685b63ccbfb
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch updates the Type-C USB2/3 port mapping to reflect the mux
connection change as mentioned in previous patch
commit ee3f796200 (mb/google/rex/var/ovis: Fix mux
change as per schematics).
Here is the correct port mapping after considering the mux swap:
+--------------------------------+-------------+---------------+
| TCSS-USB Mapping | Port C0 | Port C1 | Port C2 |
+------------------+-------------+-------------+---------------+
| USB2-Port | 2 | 3 | 1 |
| USB3-Port | 0 | 2 | 1 |
+------------------+-------------+-------------+---------------+
BUG=b:289300284
TEST=Able to build and boot google/ovis to get display over Type-C1
and Type-C2 port.
Change-Id: I460004842dd8fcdc03fca6639d03e422259380ca
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76464
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Patch to increase CONSOLE_CBMEM_BUFFER_SIZE to contain FSP debug serial log.
The existing implementation uses larger cbmem size irrespective of FSP debug is enabled or
not. Ideally. larger cbmem size is required only if FSP debug is enabled.
Bug=b:284124701
TEST=Able to build and boot google/marasov.
Change-Id: I9a9e660f2738813808e0dd65d2783424b49f9a5e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reduces the CAR (Cache-as-RAM) variable usage while using FSP debug binaries, which can prevent the CAR from becoming too full and unable
to integrate other CAR global variables.
This change has the following downsides:
- FSP debug output into the cbmem buffer will be partial.
To test this change, you can:
Build and boot google/rex without any function impact with non-serial
and serial FSP debug image (unless what has been documented here).
Bug=b:284124701
TEST=Able to build and boot google/rex.
Change-Id: I16a1aa25fd32327d03a37381a696c86c95014ba0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add and use a define for the total number of P-state MSRs to avoid magic
constants in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I37a89faa0f216790b3404fc03edc62408684cc24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
There are 8 P-state MSRs and not only 7.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic2899b6e454233c6cbb8fc1e439ff069c4d3d3a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.
BUG=b:284192689
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.
Change-Id: Ic177c5ffcb6a3d3f76292a0d99ab0e806d43fc11
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76549
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.
BUG=b:281643325
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.
Change-Id: I95702e675fa3b73c7e8ee0c8625c7828d8129ea8
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76355
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit provides option for board to set CsPiStartHighinEct
FSP UPD using a new cs_pi_start_high_in_ect mb_cfg field.
BUG=b:279835630
BRANCH=none
TEST=CsPiStartHighinEct UPD is set properly
Change-Id: I7d0d5f3c782e29fb047ea421e1a5fdfc30bcc26d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Intel SPR supports up to 64 DIMMs on a 4 socket board.
Bump DIMM_INFO struct to 64 slots to properly present all
of them to the OS.
Change-Id: I52d77c4e9bff96adba6d265a272e0e425dbdb791
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73367
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Disable the CSME by default now that S3 is used instead of S0ix.
The CSME will not go into a low power state during S0ix when it is
disabled. This prevents the CPU from reaching C10 and so increases the
power usage during suspend compared to leaving CSME enabled. (This was
measured to be a ~2W different on TGL-U.) In S3, the state of the CSME
doesn't matter because the CPU will be off.
Change-Id: I88c0aebdcc977f3ba9dd8f46a6abfaa7a4ae8eb6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73354
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
System76 EC since system76/ec@9ac513128a detects if the keyboard is
white or RGB backlit via `RGBKB-DET#` at runtime. Remove the Kconfig for
the selection and update the ACPI methods for the new functionality.
Change-Id: I60d3d165a58e30d2afc8736c0eb64dd90c8227ca
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76152
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After fixing TPM logs clobbering other regions in CB:73297, S3 no longer
causes cache issues resulting in power off after multiple suspends.
This is required for disabling Intel CSME by default.
Change-Id: I7eef4c883fd65db93dae81adabd895b2de90496a
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The preram TPM log was being copied to the end of the CBMEM TPM log no
matter what the size of the CBMEM TPM log was. Eventually, it would
overwrite anything else in CBMEM beyond the TPM log.
This can currently be reproduced by enabling TPM_MEASURED_BOOT and
performing multiple S3 suspends, as coreboot is incorrectly performing
TPM measurements on S3 resume.
Change-Id: If76299e68eb5ed2ed20c947be35cea46c51fcdec
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73297
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current Sapphire Rapids code assumes that all sockets have working
CPUs. On multi-socket platforms a CPU might be missing or was disabled
due to an error. The variable PlatformData.numofIIO and the variable
SystemStatus.numCpus reflect the working CPUs, but not the actual
socket count.
Update the code to iterate over sockets until PlatformData.numofIIO
IIOs have been found. This is required as FSP doesn't sort IIOs by
working/non working status.
This resolves invalid ACPI table generation and it fixes a crash
as commands were sent to a disabled CPU.
TEST: Disabled Socket1 on IBM/SBP1.
Change-Id: I237b6392764bbdb3b96013f577a10a4394ba9c6e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76559
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:290876132
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Change-Id: Id5e0ba7a4ca57e311465ba8e74105f5ee7b8ee8a
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76435
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the actual SocketID instead of the running index.
Change-Id: I9128909756d0dbb0c4dabc52acdc98cb2a4f7baa
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76558
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The comment is only true if all sockets have working CPUs installed.
Change-Id: I8c3376c9233c33fb770082573e07e9d96abb7855
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76557
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a function to check if the CPU placed at the specified socket was
found usable during QPI init. This is useful for multi-socket
platforms were a CPU is missing or has been disabled due to an error.
Change-Id: I135968fcc905928b9bc6511e3ddbd7d12bad0096
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use the FSP define to iterate over all sockets as the runtime value of
numofIIO is the detected number of sockets, not the highest working
socket.
This fixes printing the HOB on multi-socket platforms where a CPU has
been removed or has been disabled (4S system running as 3S).
Change-Id: Ieed67cd48d26c7634636c0aae6a56f3b6fbdf640
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76492
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Intel Meteor Lake (MTL), PCIe CLK control register is accessed by
P2SB on IOE/SOC die.
So this patch does:
1. Enable PCIE_CLOCK_CONTROL_THROUGH_P2SB
2. Include pcie_clk.asl
3. Set the correct IOE_DIE_CLOCK_START for MTL-U/H.
BUG=b:288976547, b:289461604
TEST=Test on google/screebo and found the pcie clock is on/off properly
and sdcard PCIe port doesn't block S0ix with RTD3 cold enabled.
Change-Id: I6788ae766f36c9a0d4910fda1d6700f20ce73ea8
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76356
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the older platform such as Raptor Lake (RPL), Tiger Lake (TGL), it
needs PMC IPC cmd to turn on/off the corresponding clock.
Now on Meteor Lake (MTL), it control pcie clock registers on P2SB on
IOE or SoC die.
BUG=b:288976547, b:289461604
TEST=Test on google/screebo and found the pcie clock is on/off properly
and sdcard pcie port doesn't block S0ix with RTD3 cold enabled.
Change-Id: Ia729444b561daafc2dca0ed86c797eb98ce1f165
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76347
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch includes the ioe_pcr.asl file as Intel Meteor Lake has
support for IOE die.
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: Ia534dbc0db5e54e173da9cdf475a7eb2bfda9e2f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76410
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch introduces a new config named IOE_PCR_BASE_ADDRESS to define
P2SB base address.
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: I289358f9c53b557a397bd7186e6b7419c5d8c954
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76411
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch creates a helper library to migrate all the common P2SB
access routines. The PCH P2SB ACPI implementation will now rely on the
common library to perform PCR read/write operations. This will make the
code more modular and easier to maintain.
The helper library provides a single interface for accessing P2SB
registers. This makes it easier to port the code to different platforms,
for example: adding support for PS2B belongs to the IOE die for
Meteor Lake SoC generation.
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: I0b2e7ea416ca7082f68d0b822ebb9a87025b4a8b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76408
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Use newer functions and avoid the * / KiB dance
- Use existing functions for figuring out TSEG and UMA
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I73549b23bd1bfd4009e6467a5bdfeef7de81a0cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76272
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the JPEG decoder, use `bytes_per_line` instead of `width` for
address calculations, to allow for bigger framebuffers. When
calling jpeg_decode(), add an offset to the framebuffer address
so the picture gets centered.
Change-Id: I0174bdccfaad425e708a5fa50bcb28a1b98a23f7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Factor out all functions that use the indirect IO port based access to
the PM registers into a new compilation unit and only select it on
platforms that support this interface.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If9c059e450e2137f7e05441ab89c1f0e7077be9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
In all SoC pm_set_power_failure_state gets called either after a call to
enable_acpimmio_decode_pm04() or the ACPIMMIO mapping is already enabled
after reset on the SoC. This allows to use pm_read8 and pm_write8 that
use the ACPIMMIO mapping of the PM registers instead of pm_io_read8 and
pm_io_write8 which won't work on Phoenix and Glinda due to the IO ports
used on older generations to access to the PM registers not being
implemented any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0d0523d2c4920da41b3fb73cf62f22a60f1643a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Use pm_io_write8 instead of open coding the same functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d9397f2d85e48883f961adbbca0e1e71e825ce0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
In all SoC lpc_early_init gets called either after a call to
enable_acpimmio_decode_pm04() or the ACPIMMIO mapping is already enabled
after reset on the SoC. This allows to use pm_read8 and pm_write8 that
use the ACPIMMIO mapping of the PM registers to set the PM_LPC_ENABLE
bit in the PM_LPC_GATING register instead of pm_io_read8 and
pm_io_write8 which won't work on Phoenix and Glinda due to the IO ports
used on older generations to access to the PM registers not being
implemented any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b31ec4e03a06796502c89e3c2cfaac2d41b0ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76461
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
None of the platforms that used enable_acpimmio_decode_pm24 is in the
tree any more, so drop this function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iea345a825c4581bf2acb932692ebcad2a7a5b4ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The enable_acpimmio_decode_pm04 function uses the IO port based indirect
access of the PM register space. The PM_INDEX and PM_DATA registers
don't exist any more on Glinda, so the code shouldn't access those.
Since the PM_04_ACPIMMIO_DECODE_EN bit in the
ACPIMMIO_DECODE_REGISTER_04 register is 1 after reset, the ACPIMMIO
space is still accessible.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic6bc0479ea4ea2b9fe3629a6e15940b31b2864d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The enable_acpimmio_decode_pm04 function uses the IO port based indirect
access of the PM register space. The PM_INDEX and PM_DATA registers
don't exist any more on Phoenix, so the code shouldn't access those.
Since the PM_04_ACPIMMIO_DECODE_EN bit in the
ACPIMMIO_DECODE_REGISTER_04 register is 1 after reset, the ACPIMMIO
space is still accessible.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia41f239b023edc094f5cbae63ed7c079649c74da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76437
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch disables early EC sync to avoid an idle delay (~3sec)
without a provision to notify the user about some critical task
in progress.
Doing EC sync at later stage allows us to notify using graphical msg
on screen to make user aware of the WIP task.
BUG=b:279944831
TEST=Able to perform EC sync from depthcharge on google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I03ed40827c50e75ceaaf94e30d675014ebf22dac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Disable DMI link ASPM which can degrade performance of overall system.
Desktop does not need to be concerned that much about idle power
consumption.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I60af9d2ab2913db449059e1e007999fa2f307f5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69826
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allows the new Infineon TPM chip used on Clevo laptops to be recognized.
Change-Id: I2ee31b787d80c0b9c24c748b1b28906a22a1dee7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Create the craaskov variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:290248526
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CRAASKOV
Change-Id: I1d12f7c3d0ef7067f4530c1c69c560f9a83561f6
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Add support for AP initiated mode entry. The code flow has been
optimized as below -
Code flow when AP initiated mode entry is disabled:
+-------+
| Start |
+---+---+
|
|
+---------+---------+
|wait_for_connection|
| Is DP ALT mode |
| available? |
+---------+---------+
|
+--------------->-------+
Yes| No |
+---------+---------+ |
|Skip enter_dp_mode | |
+---------+---------+ |
| |
| |
+-----------+----------+ |
|wait_for_dp_mode_entry| |
| Is DP flag set? | |
+-----------+----------+ |
| |
+--------------->--------
Yes| No |
+-----------+----------+ |
| wait_for_hpd | |
| Is HPD_LVL flag set? | |
+-----------+----------+ |
| |
+--------------->--------
Yes| No |
+-----------+----------+ |
| Rest of the code | |
+-----------+----------+ |
| |
+---------------<-------+
|
+---+---+
| End |
+-------+
Code flow when AP initiated mode entry is enabled:
+-------+
| Start |
+---+---+
|
+------------+-----------+
|Skip wait_for_connection|
+------------+-----------+
|
+--------+-------+
| enter_dp_mode |
| Is USB device? |
+--------+-------+
|
+--------------->-------+
Yes| No |
+---------+---------+ |
| enter_dp_mode | |
| Send DP mode | |
| entry command | |
+---------+---------+ |
| |
+-----------+----------+ |
|wait_for_dp_mode_entry| |
| Is DP flag set? | |
| (If not, loop wait | |
| until timed out) | |
+-----------+----------+ |
| |
+--------------->--------
Yes| No |
+-----------+----------+ |
| wait_for_hpd | |
| Is HPD_LVL flag set? | |
| (If not, loop wait | |
| until timed out) | |
+-----------+----------+ |
| |
+--------------->--------
Yes| No |
+-----------+----------+ |
| Rest of the code | |
+-----------+----------+ |
| |
+---------------<-------+
|
+---+---+
| End |
+-------+
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Time taken by enter_dp_mode / wait_for_dp+hpd / MultiPhaseSiInit
functions with this patch train:
1. When AP Mode entry is enabled
- With type-c display on C1 and SuzyQ on C0: 6.9ms / 420ms / 616ms
- With USB key on C1 and SuzyQ on C0 : 6.0ms / 505ms / 666ms
- Without any device on C1 and SuzyQ on C0 : 3.7ms / 0ms / 178ms
2. When AP Mode entry is disabled
- With type-c display on C1 and SuzyQ on C0: 1.7ms / 2.5ms / 213ms
- With USB key on C1 and SuzyQ on C0 : 0.9ms / 3.3ms / 177ms
- Without any device on C1 and SuzyQ on C0 : 0.8ms / 1.8ms / 165ms
Without this patch train, wait_for_hpd would cause a constant delay of
WAIT_FOR_HPD_TIMEOUT_MS (i.e. 3 seconds) per type-c port when there is
no device connected.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I514ccbdbaf905c49585dc00746d047554d7c7a58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Split wait-loop for DP and HPD flags as below -
- google_chromeec_wait_for_hpd
- google_chromeec_wait_for_dp_mode_entry
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3e565d6134f6433930916071e94d56d92dc6cb06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76370
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Wait for DP/HPD flags only in AP initiated mode entry
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5137c346fbf1edabc60a53e0978e32f54885c330
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76369
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skip TCSS `wait_for_connection` for AP initiated mode entry.
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia04ff470961831237fe851f7ae3feaa5623d4b4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76368
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Skip TCSS `enter_dp_mode` command when there is no USB device detected
on the port.
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ie6cd84cab3631596d4d7178dae2040e25c621f63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The PRESERVE flag in the FMD file tells futility not to erase the
fmap partition when updating the firmware. Because of an issue on
myst right now, we want the RW_MRC_CACHE partition to be erased
when the firmware is updated.
BUG=b:290763369
TEST=None
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id586ae057b2fd6d513ddbba5e1284dea39467d95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76478
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Phoenix doesn't have an eMMC controller and those UPDs were carried over
from Picasso. The SoC's fsp_m_params.c didn't write to any of those
fields, so this doesn't change any behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie3640c1493a92c1effba3ce42103d022bd8399ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Because of the way that the CBFS filename is generated from the contents
of the microcode patch, if a duplicate microcode patch is included in
the build, the makefile would create a second copy of the name, which
doesn't work. This led to "odd" results where the other attributes of
the first copy were erased, causing cbfstool to fail. The cause of the
failure is not immediately obvious, and is a little difficult to track
down.
This patch causes an immediate failure and gives a reason as to the
cause of the issue.
When a failure is seen, this is the result:
File1: 3rdparty/amd_blobs/phoenix/psp/TypeId0x66_UcodePatch_PHXn4_A0.bin
File2: 3rdparty/amd_blobs/phoenix/psp/TypeId0x66_UcodePatch_PHX4_A0.bin
src/soc/amd/common/block/cpu/Makefile.inc:25: *** Error: The cbfs
filename "cpu_microcode_a740.bin" is used for both above files. Check
your microcode patches for duplicates.. Stop.
TEST=Now checked for both positive and negative failures.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3d34dc5585182545bdcbfa6370ebc34aa767cae2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76423
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
System76 boards use the VBT data file, not the VGA optionrom.
Change-Id: Ie4100e09221ae4f301a621e7aac62e38ac04a444
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
There is a data abort in ABL when the memory training data is used from
APOB Cache. Disable APOB Cache until the cause is identified. The
downside of this change is that the memory training happens in every
boot cycle.
BUG=b:290763369
TEST=Build BIOS image and boot to OS in Myst. Trigger a reboot from AP
console and ensure that the system boots to OS.
Change-Id: I20f4f40cdaac68bca6e121e3a238d13fe80d0d3c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The dxio_port_param_type enum was copied over from Cezanne, but the enum
on the AGESA/FSP side changed between the generations. Add a TODO as a
reminder that this needs to be updated.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8063ab00a508b045265bab73197c8ca117622800
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76448
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the proper dxio_link_hotplug_type enum values for the link_hotplug
field in the DXIO descriptors to replace the magic values in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieb1513737e6022a668287dc80a39d96cda2b18d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76439
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the dxio_link_hotplug_type enum definition for the link_hotplug
field in the DXIO descriptor struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieeb3e3edaed2c689707edc4df7d25c777005fde2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The dxio_port_param_type enum was copied over from Cezanne to Mendocino
to Phoenix, but the enum on the AGESA/FSP side changed between the
generations. Update the definition to match the definition used in the
Phoenix FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c87fdc8bf0849d797c2af74c1d1495c7d85019f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76447
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The dxio_port_param_type enum was copied over from Cezanne to Mendocino,
but the enum on the AGESA/FSP side changed between the two generations.
Update the definition to match the definition used in the Mendocino FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4c4d7e4e3eaf7af9a43007363135412633c7440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76446
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Use newer functions and avoid the * / KiB dance
- Use existing functions for figuring out TSEG and UMA
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic6f42053b5303151906360d8512b9d63dd297854
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76249
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The OxPCIe952 serial cards currently fails after entering
postcar, since the state of oxpcie_present is not maintained
from previous stage.
As a quick work-around test the expected UART register space
to see if anyone decodes the address.
Change-Id: I5601034be6e413616fb3433c894fb008a3e02138
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74597
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change `CBFS_SIZE` to match the actual BIOS region size, as specified in
the FIT XML config.
Fixes building with `VALIDATE_INTEL_DESCRIPTOR` selected.
Change-Id: I91a46b3ed6cc3161df27eed19d8cdf2820e90d7e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76326
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It moves cr50_plat_irq_status() to common code and adds Kconfig
option to specify GPIO used for interrupt.
BUG=b:277787305
TEST=Build all affected platform and confirm using right GPIO
number. Tested on Skyrim.
Change-Id: I775c4e24cffee99b6ac3e05b58a75425029a86c8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75621
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The file for Mendocino and Phoenix still used Cezanne in the comment and
from the file it's already clear to which SoC generation this belongs,
so just drop the SoC name from the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73e8b01e46904578226bb64e5e4659016c491880
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76440
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot logs the error below, since the value of hporch is too small. Increasing hbl from 80 to 174, and hso from 40 to 72 to revise the HBP(Horizontal Back Porch) and HFP(Horizontal Front Porch). After revising this, the actual measurement frame rate is 60.1Hz.
[ERROR]HFP plus HBP is not greater than d_phy, the panel may not work
properly.
BUG=b:284812193
TEST=cbmem -c | grep "ERROR" and measure frame rate
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I7de5984ce8aec12d8ebe292974e05776835330d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76218
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates the MemInfoHob header file as per Meteor Lake
version 3251.81.
Changes include:
1. Drop DimmDFE structure variable
2. Drop unused macro MAX_COPY_DIMM_DFE_TAPS
BUG=b:290898626
TEST=Able to build and boot google/rex.
w/o this patch:
cbmem -c -1 | grep DIMM
[ERROR] No DIMMs found
w/ this patch:
cbmem -c -1 | grep DIMM
[DEBUG] 8 DIMMs found
Change-Id: I8eed410831399bb4835244f48c14d5ed9e701e68
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76433
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Per the suggestion in CB:76218, print actual values to the error
messages, which may be helpful for debugging.
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Id3a7a8c76b6ad15e7cf71225d8529f3e034935ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76442
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
When set to 1, the link_compliance_mode element of the DXIO port
descriptor will cause the corresponding PCIe port to not be trained but
to output a compliance testing pattern instead. Update the comment to
point out that this is only a testing mode.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaabb16c51a0c08391cd2d63b8064c524a748ccb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76441
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=b:286803481
TEST=Make screebo suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: I7fd342e52fa0f9126eab4c857a5adc04c26e49c6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76406
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCR (Private Configuration Register) is applicable to access the
P2SB register space starting with the Intel SkyLake generation of SoC.
Prior to Intel Meteor Lake SoC generation, the only P2SB existed inside
the PCH die. Starting with Meteor Lake SoC, there are two P2SB, one in
SoC die (same as PCH die for U/H SoC) and another in IOE die.
This patch renames pcr.asl to pch_pcr.asl to reflect the actual source
of the P2SB IP in the die (i.e., SoC die or PCH die).
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: Idb66293eaab01e1d4bcd4e9482157575fb0adf04
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76407
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
GMBus is an I2C compatible link on Intel IGPUs. Most non-Linux OS's
don't support accessing this ordinarily, so a custom driver is
needed with a bit of ACPI hackery. Reserve 2 IDs from the
coreboot namespace so that the 2 devices required can be populated
in Windows device manager
Change-Id: I389612441e96ce2fc5e006051e523661953eba6e
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Pujjo support WWAN EM060 device, use FW_CONFIG to handle the
power on sequence.
BUG=b:290709711
TEST=Build and check WWAN EM060 power on sequence.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I66800c75274e8e1e55d4314c82b7fcdf2a4477bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76403
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With the latest hardware revision, the polarity of GPP_B5 has been
changed. For a full-populated DRAM configuration, the input signal is
now connected to 3.3 V and for a half-populated configuration it is
connected to ground.
BUG=none
TEST=Use different populated mainboards and check coreboot log
GPP_B5 = 0:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
GPP_B5 = 1:
[DEBUG] 2 DIMMs found
Change-Id: Iaa3a63fa52c802d8f5d8c6cc11dd6edfac117e88
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76434
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify reset_delay_ms from 300ms to 6ms for ELAN EKTH7D18.
BUG=b:285999032
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and touchscreen is workable.
Change-Id: Iffcddbe7735b7a837887dec68e1270c2af5f4556
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76417
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Disable scalability tracking for autonomous frequency control in
order to improve power and performance.
BUG=b:280021171
TEST=Boot to OS on brya0
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: If71ee5374c67611b32691bbec4effdf828b3e566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74723
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Hook the newly exposed EnableHwpScalabilityTracking UPD up so that
boards can configure is via devicetree.
BUG=b:280021171
TEST=Verified by enabling/disabling the UPD on google/brya
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I4c8845c445d46caa30a0245386ab9cd690d2623f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74722
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Hook the newly exposed DisableSagvReorder UPD up so that
boards can configure is via devicetree.
BUG=b:268546941
TEST=Verified by enabling/disabling the UPD on google/brya
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I89235d9384b67f03e68425aadd3458e1c77ff555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Disable re-ordering SaGv point on warm reset so that most
performant SaGv point is picked after memory training and
boot time is reduced.
BUG=b:268546941
TEST=Observe boot time improvement with these two UPDs set
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I44a1c054d52bb8585a320bb8a52a8f137e639804
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74721
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable upd to reduce size of the memory test.
BUG=b:268546941
TEST=Observe boot time improvement with these two UPDs set
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I95c7d8503596c2712d7abe123ed1f911ac4abacf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
