GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/soc/intel/skylake/chip.c

412 lines
14 KiB
C
Raw Normal View History

soc/intel/skylake: Use SPDX for GPL-2.0-only files Done with sed and God Lines. Only done for C-like code for now. Change-Id: I7354edb15ca9cbe181739bc2a148f16bb85ab118 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-04-05 15:47:17 +02:00
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
soc/intel/skylake: Use Broadwell as comparision base for Skylake SOC Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-13 03:19:47 +02:00
skylake: Do not pass VBT to FSP if display init not required The FSP 2.0 change broke the logic for determining whether or not to execute the GOP binary. Modify the FSP 2.0 code to do the right thing and check for display_init_required() before passing VBT into FSP and the GOP binary. BUG=chrome-os-partner:61726 TEST=disable developer mode and ensure FSP does not run GOP Change-Id: I7fc8055b6664e0cf231a8de34367406eb049dfe1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18084 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-10 07:23:39 +01:00
#include <bootmode.h>
skylake: Add initial FSP2.0 support Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-23 11:01:23 +02:00
#include <bootstate.h>
{drivers,soc}/intel/fsp2_0: Move chipset specific logo handling to SoC FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which are chipset specific. Create soc_load_logo() which will pass the logo pointer and size. This function will call fsp_load_logo which will load the logo. BUG=NA TEST= Build and verified logo is displayed on Facebook Monolith Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-17 14:10:16 +01:00
#include <cbmem.h>
skylake: Add initial FSP2.0 support Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-23 11:01:23 +02:00
#include <fsp/api.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <arch/acpi.h>
#include <console/console.h>
#include <device/device.h>
soc/intel/skylake: Swap PCI devfn resides in same PCI device After FSP-S, a device on PCI function n will be function swapped to function 0 if there is no device presnet on function 0. It needs some modification for DT and causes mismatches between software configuration and hardware schematic. This patch is from d779605, which swaps the devfn of the first enabled device in DT and function 0 resides in a PCI device. BUG=b:80105785 BRANCH=None TEST=Make sure the device is still enabled after coalescence with device on bus 0 and w/o device on bus 0. Test with suspend and resume and ensure it's consistent. Change-Id: Ibbc5d6e979977011f5904c8bd4b2f1be16bd23dc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/26479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:32:48 +02:00
#include <device/pci_ids.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <fsp/util.h>
soc/intel: Rename <intelblocks/chip.h> The filename chip.h has a special purpose with the generation of static devicetree, where the configuration structure name matches the path to the chip.h file. For example, soc/intel/skylake/chip.h defines struct soc_intel_skylake_config. The renamed file did not follow this convention and the structure it defines would conflict with one defined soc/intel/common/chip.h if such is ever added. Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-27 23:00:30 +02:00
#include <intelblocks/cfg.h>
soc/intel/skylake: Ensure FSP don't override ITSS IPCx registers This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28 16:24:30 +02:00
#include <intelblocks/itss.h>
soc/intel/skylake: Unify serial IRQ options We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-23 19:24:51 +01:00
#include <intelblocks/lpc_lib.h>
soc/intel/common: Remove common chip config use_fsp_mp_init This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-19 13:32:17 +01:00
#include <intelblocks/mp_init.h>
intel/skylake: Use new PCIe RP devicetree update The old code stumbled when the whole first group of root ports was disabled and also made the (sometimes wrong) assumption that FSP would only hide function 0 if we explicitly told it to disable it. Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702 Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-12 15:16:33 +02:00
#include <intelblocks/pcie_rp.h>
soc/intel/skylake: Limit xDCI feature when VBOOT is enabled Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26 11:24:18 +02:00
#include <intelblocks/xdci.h>
soc/intel/skylake/chip: Unhide P2SB device APL unhides the P2SB device in coreboot already. Do the same on SKL/KBL. As the coreboot PCI allocator needs to be able to find the device, unhide it after FSP-S. The device is hidden in the SoC finalize function already and not visible in the OS, as more P2SB device IDs have been added. Other SoCs aren't updated, because they are too broken. Fixes "BUG: XXX requests hidden ...." warnings in coreboot log. Tested on Supermicro X11SSH-TF. Change-Id: I0d14646098c34d3bf5cd49c35dcfcdce2c57431d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner
2019-09-26 14:00:14 +02:00
#include <intelblocks/p2sb.h>
soc/intel/common/pch: Add pch lockdown code pch lockdown functionality can be used by supported PCH. Right now pch lockdown functionality is applied for SPT (Skylake SOC) and CNP(Cannon Lake SOC) PCH. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL and CNL platform. Change-Id: I0b81bbc54f737cb4e7120f44bbe705039b45ccb3 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-28 12:42:03 +02:00
#include <intelpch/lockdown.h>
fsp2_0: implement stage cache for silicon init Stage cache will save ~20ms on S3 resume for apollolake platforms. Implementing the cache in ramstage to save silicon init and reload it on resume. This patch adds passing S3 status to silicon init in order to verify that the wake is from S3 and not for some other reason. This patch also includes changes needed for quark and skylake platforms that require fsp 2.0. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for reef and tested boot and S3 resume path saving 20ms Change-Id: I99dc93c1d7a7d5cf8d8de1aa253a326ec67f05f6 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/17460 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17 21:23:04 +01:00
#include <romstage_handoff.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <soc/acpi.h>
soc/intel/skylake: use locate_vbt directly instead of calling a wrapper Change-Id: I65c423660ab1778f5dd9243e428a4d005bd1699a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05 18:19:29 +02:00
#include <soc/intel/common/vbt.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <soc/interrupt.h>
soc/intel/skylake: Enable VT-d and X2APIC We use the usual static addresses 0xfed90000/0xfed91000 for the GFX IOMMU and the general IOMMU respectively. These addresses have to be configured in MCHBAR registers (maybe, who knows, the blob is undocu- mented), advertised to FSP and reserved from the OS. The new devicetree option `ignore_vtd` allows to retain the old beha- viour (do whatever pre-set UPD values suggest). We also let FSP set up distinct BDFs for messages originating from the I/O-APIC and the HPET. Change-Id: I77f87c385736615c127143760bbd144f97986b37 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-19 09:36:03 +02:00
#include <soc/iomap.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <soc/irq.h>
soc/intel/skylake: Ensure FSP don't override ITSS IPCx registers This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28 16:24:30 +02:00
#include <soc/itss.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
soc/intel/skylake: Enable VT-d and X2APIC We use the usual static addresses 0xfed90000/0xfed91000 for the GFX IOMMU and the general IOMMU respectively. These addresses have to be configured in MCHBAR registers (maybe, who knows, the blob is undocu- mented), advertised to FSP and reserved from the OS. The new devicetree option `ignore_vtd` allows to retain the old beha- viour (do whatever pre-set UPD values suggest). We also let FSP set up distinct BDFs for messages originating from the I/O-APIC and the HPET. Change-Id: I77f87c385736615c127143760bbd144f97986b37 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-19 09:36:03 +02:00
#include <soc/systemagent.h>
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#include <string.h>
soc/{amd,intel}/chip: Use local include for chip.h Change-Id: Ic1fcbf4b54b7d0b5cda04ca9f7fc145050c867b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-21 15:38:06 +01:00
#include "chip.h"
intel/skylake: Use new PCIe RP devicetree update The old code stumbled when the whole first group of root ports was disabled and also made the (sometimes wrong) assumption that FSP would only hide function 0 if we explicitly told it to disable it. Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702 Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-12 15:16:33 +02:00
static const struct pcie_rp_group pch_lp_rp_groups[] = {
{ .slot = PCH_DEV_SLOT_PCIE, .count = 8 },
{ .slot = PCH_DEV_SLOT_PCIE_1, .count = 4 },
{ 0 }
soc/intel/skylake: Swap PCI devfn resides in same PCI device After FSP-S, a device on PCI function n will be function swapped to function 0 if there is no device presnet on function 0. It needs some modification for DT and causes mismatches between software configuration and hardware schematic. This patch is from d779605, which swaps the devfn of the first enabled device in DT and function 0 resides in a PCI device. BUG=b:80105785 BRANCH=None TEST=Make sure the device is still enabled after coalescence with device on bus 0 and w/o device on bus 0. Test with suspend and resume and ensure it's consistent. Change-Id: Ibbc5d6e979977011f5904c8bd4b2f1be16bd23dc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/26479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:32:48 +02:00
};
intel/skylake: Use new PCIe RP devicetree update The old code stumbled when the whole first group of root ports was disabled and also made the (sometimes wrong) assumption that FSP would only hide function 0 if we explicitly told it to disable it. Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702 Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-12 15:16:33 +02:00
static const struct pcie_rp_group pch_h_rp_groups[] = {
{ .slot = PCH_DEV_SLOT_PCIE, .count = 8 },
{ .slot = PCH_DEV_SLOT_PCIE_1, .count = 8 },
/* Sunrise Point PCH-H actually only has 4 ports in the
third group. But that would require a runtime check
and probing 4 non-existent ports shouldn't hurt. */
{ .slot = PCH_DEV_SLOT_PCIE_2, .count = 8 },
{ 0 }
soc/intel/skylake: Swap PCI devfn resides in same PCI device After FSP-S, a device on PCI function n will be function swapped to function 0 if there is no device presnet on function 0. It needs some modification for DT and causes mismatches between software configuration and hardware schematic. This patch is from d779605, which swaps the devfn of the first enabled device in DT and function 0 resides in a PCI device. BUG=b:80105785 BRANCH=None TEST=Make sure the device is still enabled after coalescence with device on bus 0 and w/o device on bus 0. Test with suspend and resume and ensure it's consistent. Change-Id: Ibbc5d6e979977011f5904c8bd4b2f1be16bd23dc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/26479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:32:48 +02:00
};
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
void soc_init_pre_device(void *chip_info)
{
soc/intel/skylake: Ensure FSP don't override ITSS IPCx registers This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28 16:24:30 +02:00
/* Snapshot the current GPIO IRQ polarities. FSP is setting a
* default policy that doesn't honor boards' requirements. */
itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
/* Perform silicon specific init. */
romstage_handoff: add helper to determine resume status Instead of having callers query the romstage handoff resume status by inspecting the object themselves add romstage_handoff_is_resume() so that the same information can be queried easily. Change-Id: I40f3769b7646bf296ee4bc323a9ab1d5e5691e21 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17647 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-30 04:22:42 +01:00
fsp_silicon_init(romstage_handoff_is_resume());
soc/intel/skylake: Ensure FSP don't override ITSS IPCx registers This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28 16:24:30 +02:00
soc/intel/skylake/chip: Unhide P2SB device APL unhides the P2SB device in coreboot already. Do the same on SKL/KBL. As the coreboot PCI allocator needs to be able to find the device, unhide it after FSP-S. The device is hidden in the SoC finalize function already and not visible in the OS, as more P2SB device IDs have been added. Other SoCs aren't updated, because they are too broken. Fixes "BUG: XXX requests hidden ...." warnings in coreboot log. Tested on Supermicro X11SSH-TF. Change-Id: I0d14646098c34d3bf5cd49c35dcfcdce2c57431d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner
2019-09-26 14:00:14 +02:00
/*
* Keep the P2SB device visible so it and the other devices are
* visible in coreboot for driver support and PCI resource allocation.
* There is no UPD setting for this.
*/
p2sb_unhide();
soc/intel/skylake: Ensure FSP don't override ITSS IPCx registers This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28 16:24:30 +02:00
/* Restore GPIO IRQ polarities back to previous settings. */
itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
soc/intel/skylake: Swap PCI devfn resides in same PCI device After FSP-S, a device on PCI function n will be function swapped to function 0 if there is no device presnet on function 0. It needs some modification for DT and causes mismatches between software configuration and hardware schematic. This patch is from d779605, which swaps the devfn of the first enabled device in DT and function 0 resides in a PCI device. BUG=b:80105785 BRANCH=None TEST=Make sure the device is still enabled after coalescence with device on bus 0 and w/o device on bus 0. Test with suspend and resume and ensure it's consistent. Change-Id: Ibbc5d6e979977011f5904c8bd4b2f1be16bd23dc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/26479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:32:48 +02:00
/* swap enabled PCI ports in device tree if needed */
intel/skylake: Use new PCIe RP devicetree update The old code stumbled when the whole first group of root ports was disabled and also made the (sometimes wrong) assumption that FSP would only hide function 0 if we explicitly told it to disable it. Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702 Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-12 15:16:33 +02:00
if (CONFIG(SKYLAKE_SOC_PCH_H))
pcie_rp_update_devicetree(pch_h_rp_groups);
else
pcie_rp_update_devicetree(pch_lp_rp_groups);
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
}
soc/intel/skylake: Fix broken suspend-resume With recent change (a4b11e5c90: soc/intel/skylake: Perform CPU MP Init before FSP-S Init) to perform CPU MP init before FSP-S init, suspend resume is currently broken for all skylake/kabylake boards. All the skylake/kabylake boards store external stage cache in TSEG, which is relocated post MP-init. Thus, if FSP loading and initialization is done after MP-init, then ramstage is not able to: 1. Save FSP component in external stage cache during normal boot, and 2. Load FSP component from external stage cache during resume In order to fix this, ensure that FSP loading happens separately from FSP initialization. Add fsp_load callback for pre_mp_init which ensures that the required FSP component is loaded/saved from/to external stage cache. BUG=chrome-os-partner:63114 BRANCH=None TEST=Verified that 100 cycles of suspend/resume worked fine on poppy. Change-Id: I5b4deaf936a05b9bccf2f30b949674e2ba993488 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18414 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20 22:41:56 +01:00
void soc_fsp_load(void)
{
fsps_load(romstage_handoff_is_resume());
}
soc/intel/skylake: Get rid of device_t Use of device_t has been abandoned in ramstage. Change-Id: Idf00c029331aba30c8bfca71546cad62ff6bb0a7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26541 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25 12:56:45 +02:00
static void pci_domain_set_resources(struct device *dev)
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
{
assign_resources(dev->link_list);
}
static struct device_operations pci_domain_ops = {
.read_resources = &pci_domain_read_resources,
.set_resources = &pci_domain_set_resources,
.scan_bus = &pci_domain_scan_bus,
coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:53:33 +01:00
#if CONFIG(HAVE_ACPI_TABLES)
soc/intel/skylake: Generate ACPI DMAR table If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the GFXVTBAR is only generated if the IGD is enabled. Change-Id: I8176401dd19aee7ad09a8a145b7a3801fe5b2ae1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-18 20:03:46 +02:00
.write_acpi_tables = &northbridge_write_acpi_tables,
.acpi_name = &soc_acpi_name,
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#endif
};
static struct device_operations cpu_bus_ops = {
.read_resources = DEVICE_NOOP,
.set_resources = DEVICE_NOOP,
coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:53:33 +01:00
#if CONFIG(HAVE_ACPI_TABLES)
Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator` These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-31 17:34:52 +02:00
.acpi_fill_ssdt = generate_cpu_entries,
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
#endif
};
soc/intel/skylake: Get rid of device_t Use of device_t has been abandoned in ramstage. Change-Id: Idf00c029331aba30c8bfca71546cad62ff6bb0a7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26541 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25 12:56:45 +02:00
static void soc_enable(struct device *dev)
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
{
/* Set the operations if it is a special bus type */
soc/intel/skylake: Remove pch_enable_dev() from SoC PCI resources MMIO space/bus master enabling is handled inside pch_dev_enable_resources() from common device code. Hence no need to have an explicit soc function to do the same. TEST=lspci from kernel console shows same pci device list without and without this patch. Change-Id: I005e486dd435e9c61ae3f5dfe3ff0e8f688d16e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06 13:44:01 +01:00
if (dev->path.type == DEVICE_PATH_DOMAIN)
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
dev->ops = &pci_domain_ops;
soc/intel/skylake: Remove pch_enable_dev() from SoC PCI resources MMIO space/bus master enabling is handled inside pch_dev_enable_resources() from common device code. Hence no need to have an explicit soc function to do the same. TEST=lspci from kernel console shows same pci device list without and without this patch. Change-Id: I005e486dd435e9c61ae3f5dfe3ff0e8f688d16e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06 13:44:01 +01:00
else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER)
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
dev->ops = &cpu_bus_ops;
}
struct chip_operations soc_intel_skylake_ops = {
CHIP_NAME("Intel 6th Gen")
.enable_dev = &soc_enable,
.init = &soc_init_pre_device,
};
soc/intel/skylake: Use Broadwell as comparision base for Skylake SOC Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-13 03:19:47 +02:00
skylake: Add initial FSP2.0 support Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-23 11:01:23 +02:00
/* UPD parameters to be initialized before SiliconInit */
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
skylake: Add initial FSP2.0 support Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-23 11:01:23 +02:00
{
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
FSP_S_CONFIG *params = &supd->FspsConfig;
FSP_S_TEST_CONFIG *tconfig = &supd->FspsTestConfig;
soc/intel: Fix invalid use of 'static' Just keep the variables on the stack. Change-Id: I36b29d8fb7dac159b29609033cba450bea9adf77 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-14 04:50:20 +02:00
struct soc_intel_skylake_config *config;
soc/intel: Use config_of_path(SA_DEVFN_ROOT) We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I53324603c9ece1334c6e09d51338084166f7a585 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34299 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12 12:10:19 +02:00
struct device *dev;
soc/intel: unify VBT fetching API Skylake used the inner function, wrapping it in the same set of tests as the common code does, but expressed differently. Change-Id: Ifa6912255e7874a6e80301d49128adda6f624209 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/26037 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-03 18:06:15 +02:00
uintptr_t vbt_data = (uintptr_t)vbt_get();
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
int i;
soc/intel: Replace config_of_path() with config_of_soc() The previously provided device path made no difference, all integrated PCI devices point back to the same chip_info structure. Change reduces the exposure of various SA_DEVFN_xx and PCH_DEVFN_xx from (ugly) soc/pci_devs.h. Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-27 23:20:27 +02:00
config = config_of_soc();
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
mainboard_silicon_init_params(params);
soc/intel/skylake: Set PsysPmax value According to doc #543977 Power Architecture Guide, PsysPmax is the maximum platform power. It maps to the full-scale of Psys signal. This patch adds a "psys_pmax" member in chip information which allows boards to set up maximum platform power. BUG=b:71594855 BRANCH=None TEST=Set "psys_pmax" in device tree & "USE=fw_debug emerge-fizz chromeos-mrc coreboot chromeos-bootimage" & ensure correct PsysPmax value is passed to FSP-S through UPD. Verfied on KBL-R and KBL-U SKUs. Change-Id: I44f2e2917a8eb9ce3bb69d9c15899d4c7c5b2883 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-15 08:03:01 +01:00
/* Set PsysPmax if it is available from DT */
if (config->psys_pmax) {
/* PsysPmax is in unit of 1/8 Watt */
tconfig->PsysPmax = config->psys_pmax * 8;
printk(BIOS_DEBUG, "psys_pmax = %d\n", tconfig->PsysPmax);
}
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->GraphicsConfigPtr = (u32) vbt_data;
for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) {
params->PortUsb20Enable[i] =
config->usb2_ports[i].enable;
soc/intel/skylake: Add USB Port Over Current (OC) Pin programming Program USB Overcurrent pins as per board schematics definition. BUG=none BRANCH=none TEST=Build and boot kunimitsu from USB device. Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-22 15:51:49 +01:00
params->Usb2OverCurrentPin[i] =
config->usb2_ports[i].ocpin;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->Usb2AfePetxiset[i] =
config->usb2_ports[i].pre_emp_bias;
params->Usb2AfeTxiset[i] =
config->usb2_ports[i].tx_bias;
params->Usb2AfePredeemp[i] =
config->usb2_ports[i].tx_emp_enable;
params->Usb2AfePehalfbit[i] =
config->usb2_ports[i].pre_emp_bit;
}
for (i = 0; i < ARRAY_SIZE(config->usb3_ports); i++) {
params->PortUsb30Enable[i] = config->usb3_ports[i].enable;
soc/intel/skylake: Add USB Port Over Current (OC) Pin programming Program USB Overcurrent pins as per board schematics definition. BUG=none BRANCH=none TEST=Build and boot kunimitsu from USB device. Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-22 15:51:49 +01:00
params->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
if (config->usb3_ports[i].tx_de_emp) {
params->Usb3HsioTxDeEmphEnable[i] = 1;
params->Usb3HsioTxDeEmph[i] =
config->usb3_ports[i].tx_de_emp;
}
if (config->usb3_ports[i].tx_downscale_amp) {
params->Usb3HsioTxDownscaleAmpEnable[i] = 1;
params->Usb3HsioTxDownscaleAmp[i] =
config->usb3_ports[i].tx_downscale_amp;
}
}
memcpy(params->SataPortsEnable, config->SataPortsEnable,
sizeof(params->SataPortsEnable));
memcpy(params->SataPortsDevSlp, config->SataPortsDevSlp,
sizeof(params->SataPortsDevSlp));
soc/intel/skylake: add some FSP SATA params This adds SATA parameters for SpinUp, HotPlug and TestMode to the Skylake FSP 2.0 interface. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I7ba67879b78c2cb0fd0b0ce832140b213edd5884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35186 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-01 13:53:09 +02:00
memcpy(params->SataPortsHotPlug, config->SataPortsHotPlug,
sizeof(params->SataPortsHotPlug));
memcpy(params->SataPortsSpinUp, config->SataPortsSpinUp,
sizeof(params->SataPortsSpinUp));
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
memcpy(params->PcieRpClkReqSupport, config->PcieRpClkReqSupport,
sizeof(params->PcieRpClkReqSupport));
memcpy(params->PcieRpClkReqNumber, config->PcieRpClkReqNumber,
sizeof(params->PcieRpClkReqNumber));
soc/intel/skylake: Add config for enabling PCIe AER Add a config for enabling/disabling Advanced Error Reporting feature for PCIe root ports. BUG=b:64798078 TEST="lspci" shows that AER is enabled in the capabilities list. Change-Id: Ieb74c3566ded2276e549c98f78813c4f5d4d310a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-05 10:48:25 +02:00
memcpy(params->PcieRpAdvancedErrorReporting,
config->PcieRpAdvancedErrorReporting,
sizeof(params->PcieRpAdvancedErrorReporting));
soc/intel/skylake: Add config for enabling LTR for PCIe Root port There are a lot errors reported by AER driver for root port 0. The erors are being caused by an unsupported request from the device to the upstream port. Enabling LTR on the root port stops these errors, it is because LTR is enabled on the device side but not on the root port and hence root port was logging the LTR messages from the device as unsupported. The PCIe base spec (v3.1a) section 6.18 also states that: LTR support is discovered and enabled through reporting and control registers described in Chapter 7. Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR. Note that it is not required that all Endpoints support LTR to permit enabling LTR in those Endpoints that do support it. When enabling the LTR mechanism in a hierarchy, devices closest to the Root Port must be enabled first. If an LTR Message is received at a Downstream Port that does not support LTR or if LTR is not enabled, the Message must be treated as an Unsupported Request. FSP has a UPD for enabling/disabling LTR on root port, use the same for configuring LTR on PCIe root ports. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: Ica97faa78fcd991dad63ae54d2ada82194b4202a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-15 22:24:20 +02:00
memcpy(params->PcieRpLtrEnable, config->PcieRpLtrEnable,
sizeof(params->PcieRpLtrEnable));
soc/intel/skylake: Add devicetree variable for PCIe HotPlug Add a variable to fill out the FSP UPD variable for PCIe HotPlug, which allows a mainboard to enable HotPlug on individual root ports. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: I6b1f525e41909a3f81984806c4ef20239032c8d6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23511 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-29 21:00:47 +01:00
memcpy(params->PcieRpHotPlug, config->PcieRpHotPlug,
sizeof(params->PcieRpHotPlug));
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure clock source number of PCIe root ports. This UPD array is set to clock source number(0-6) for all the enabled PCIe root ports, invalid(0x1F) is set for disabled PCIe root ports. BUG=b:70252901 BRANCH=None TEST= Perform the following 1. Build and boot soraka 2. Verify PCIe devices list using lspci command 3. Perform Basic Assurance Test(BAT) on soraka Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-19 15:46:50 +01:00
/*
* PcieRpClkSrcNumber UPD is set to clock source number(0-6) for
* all the enabled PCIe root ports, invalid(0x1F) is set for
* disabled PCIe root ports.
*/
for (i = 0; i < CONFIG_MAX_ROOT_PORTS; i++) {
if (config->PcieRpClkReqSupport[i])
params->PcieRpClkSrcNumber[i] =
config->PcieRpClkSrcNumber[i];
else
params->PcieRpClkSrcNumber[i] = 0x1F;
}
soc/intel/skylake: Disable Legacy PME for Root ports Legacy PME are enabled by default in FSP UPD region. When Legacy PME is enabled, then an SCI is generated and should be handled by OS and BIOS/Coreboot in collboration. OS requires some ACPI methods (eg _L69) which help to determine the wake source and also to clear some registers. But this infrastructure is not present as of now in coreboot and also linux handles PMEs natively. Hence the SCI was never handled by OS and the status bits were never cleared i.e., PCI_EXP_STS. For this reason the level triggered SCI will remain active and the system will wake up as soon as it enters S3. To fix this, diabled Legacy PME (PmSci for Root ports). Change-Id: I61317eb45305bdb14be3cc1a54fd9961d6ed593e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17553 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-16 16:57:38 +01:00
/* disable Legacy PME */
memset(params->PcieRpPmSci, 0, sizeof(params->PcieRpPmSci));
soc/intel/common/timer: Move USE_LEGACY_8254_TIMER into common/block/timer This patch moves USE_LEGACY_8254_TIMER Kconfig into common/block/timer for better code sharing. Also ported CB:33512 for SPT and ICP PCH. Change-Id: Ic767ff97aaa3eb7fa35ffa38fa416d006eaa6e78 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-08 11:19:22 +02:00
/* Legacy 8254 timer support */
params->Early8254ClockGatingEnable = !CONFIG_USE_LEGACY_8254_TIMER;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
memcpy(params->SerialIoDevMode, config->SerialIoDevMode,
sizeof(params->SerialIoDevMode));
params->PchCio2Enable = config->Cio2Enable;
soc/intel/skylake: Enable Systemagent IMGU Camera and Imaging device should be enabled for camera usecase, FSP provides a UPD to enable/disable the SA IMGU (Imaging Unit) expose the same as a config option in devicetree.cb Also remove a redundant assignment for PchCio2Enable. BUG=None BRANCH=None TEST=lspci should list 00:05:00 Change-Id: I4cf7daf41bfaf4dcba414921cac2e7e12bf89f37 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18365 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-13 17:34:11 +01:00
params->SaImguEnable = config->SaImguEnable;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->Heci3Enabled = config->Heci3Enabled;
params->LogoPtr = config->LogoPtr;
params->LogoSize = config->LogoSize;
coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:53:33 +01:00
params->CpuConfig.Bits.VmxEnable = CONFIG(ENABLE_VMX);
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->PchPmWoWlanEnable = config->PchPmWoWlanEnable;
params->PchPmWoWlanDeepSxEnable = config->PchPmWoWlanDeepSxEnable;
params->PchPmLanWakeFromDeepSx = config->WakeConfigPcieWakeFromDeepSx;
params->PchLanEnable = config->EnableLan;
soc/intel/skylake: Add integrated LAN config parameters Add parameters to configure the integrated LAN via FSP. Since this takes over a PCI CLKREQ# pin it needs to know which pin it should use, and there are additional parameters for LTR and a "K1 power save" feature. This was tested on a KBL-R board with integrated LAN, verifying that the device is functional under Linux with the e1000e driver. Change-Id: Idb200cec90a3c0d4d9c914bae9983a3bcdafcd06 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22856 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-13 22:58:35 +01:00
if (config->EnableLan) {
params->PchLanLtrEnable = config->EnableLanLtr;
params->PchLanK1OffEnable = config->EnableLanK1Off;
params->PchLanClkReqSupported = config->LanClkReqSupported;
params->PchLanClkReqNumber = config->LanClkReqNumber;
}
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->SataSalpSupport = config->SataSalpSupport;
params->SsicPortEnable = config->SsicPortEnable;
params->ScsEmmcEnabled = config->ScsEmmcEnabled;
params->ScsEmmcHs400Enabled = config->ScsEmmcHs400Enabled;
params->ScsSdCardEnabled = config->ScsSdCardEnabled;
soc/intel/skylake: config ISH in SOC side Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:49:53 +02:00
skylake,kabylake: Add support to set eMMC tuning param from dev tree Add support to set eMMC tuning params from the device tree so that it can be configured per board. BUG=b:112718426,b:112690628 BRANCH=none TEST=Build nocturne image and checked values passed in dev tree is set by FSP. Change-Id: Ic71934dce9a1c380a057e579ca3fda41983b9385 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/28274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-08-23 03:58:38 +02:00
if (!!params->ScsEmmcHs400Enabled && !!config->EmmcHs400DllNeed) {
params->PchScsEmmcHs400DllDataValid =
!!config->EmmcHs400DllNeed;
params->PchScsEmmcHs400RxStrobeDll1 =
config->ScsEmmcHs400RxStrobeDll1;
params->PchScsEmmcHs400TxDataDll =
config->ScsEmmcHs400TxDataDll;
}
soc/intel/skylake: config ISH in SOC side Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:49:53 +02:00
/* If ISH is enabled, enable ISH elements */
soc/intel: Replace uses of dev_find_slot() To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03 06:25:59 +02:00
dev = pcidev_path_on_root(PCH_DEVFN_ISH);
soc/skylake: prevent null pointer dereferences Change-Id: Ide10223e7fc37a6c4bfa408234ef3efe1846236a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-30 22:14:18 +02:00
params->PchIshEnable = dev ? dev->enabled : 0;
soc/intel/skylake: config ISH in SOC side Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22 21:49:53 +02:00
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->PchHdaEnable = config->EnableAzalia;
soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameter Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-09-23 14:38:41 +02:00
params->PchHdaVcType = config->PchHdaVcType;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->PchHdaIoBufferOwnership = config->IoBufferOwnership;
params->PchHdaDspEnable = config->DspEnable;
params->Device4Enable = config->Device4Enable;
params->SataEnable = config->EnableSata;
params->SataMode = config->SataMode;
soc/intel/skylake: pass SataSpeedLimit param to FSP2 The Librem13v2 needs to set this parameter to work around power-related issues with some SATA devices. Change-Id: I7fcef36ec8662e18834394b72427a0633c6b7e92 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22045 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-10 21:03:36 +02:00
params->SataSpeedLimit = config->SataSpeedLimit;
soc/intel/skylake: Add device setting for sata power optimization This change provides option in devicetree and feeds the option to FSP SataPwrOptEnable UPD for power saving purpose BUG=b:70491485 Change-Id: I9099c5c97765a118bdee64da303cb3ba6ceb951b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-27 05:11:23 +01:00
params->SataPwrOptEnable = config->SataPwrOptEnable;
soc/intel/skylake: Prevent disabling of TCO In Skylake/Kabylake, if ACPI PM timer is disabled then TCO also gets disabled & vice versa. FSP default config for EnableTcoTimer is disabled, this caused ACPI PM timer & TCO to be disabled by FSP even when config PmTimerDisable = 0. Thus update FSPS UPD EnableTcoTimer in accordance to devicetree config PmTimerDisable. BUG=None TEST= Build for Soraka with PmTimerDisable=0 & check if TCO caused reboot after running shell command: cat >> /dev/watchdog0 Change-Id: Ia146761036c9dbaef3c02c9a7122ae3dcdef7bdd Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/29108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-10-15 12:07:15 +02:00
params->EnableTcoTimer = !config->PmTimerDisabled;
soc/intel/skylake: pass SataSpeedLimit param to FSP2 The Librem13v2 needs to set this parameter to work around power-related issues with some SATA devices. Change-Id: I7fcef36ec8662e18834394b72427a0633c6b7e92 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22045 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-10 21:03:36 +02:00
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
tconfig->PchLockDownGlobalSmi = config->LockDownConfigGlobalSmi;
tconfig->PchLockDownRtcLock = config->LockDownConfigRtcLock;
soc/intel/skylake: Add device settings for PL4 power limit PL4 is a preemptive CPU package peak power limit,it will never be exceeded. Power is preemptively lowered before limit is reached. This change provides option in devicetree and feeds FSP PowerLimit4 UPD for power limit purpose. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I64b5a029104a102e5741e8b37c7992f2693180e8 Reviewed-on: https://review.coreboot.org/c/29808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-23 10:41:46 +01:00
tconfig->PowerLimit4 = config->PowerLimit4;
soc/intel/skylake: add some FSP SATA params This adds SATA parameters for SpinUp, HotPlug and TestMode to the Skylake FSP 2.0 interface. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I7ba67879b78c2cb0fd0b0ce832140b213edd5884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35186 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-01 13:53:09 +02:00
tconfig->SataTestMode = config->SataTestMode;
soc/intel/skylake: Lock sideband access in coreboot and not in FSP The Sideband Acces locking code is skipped from FSP by setting an FSP-S UPD called PchSbAccessUnlock. This locking is being done in coreboot during finalize.c. This is done because coreboot was failing to disable HECI1 device using Sideband interface during finalize.c if FSP already locks the Sideband access mechanism before that. So, as a solution, coreboot passes an UPD to skip the locking in FSP, and in finalize.c, after disabling HECI, it removes the Sideband access. BUG=b:63877089 BRANCH=none TEST=Build and boot poppy to check lspci not showing Intel ME controller in the PCI device list. Change-Id: I8dba4c97480200507969b0f2873337f97bd2ff6a Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-11 15:08:38 +02:00
/*
* To disable HECI, the Psf needs to be left unlocked
* by FSP till end of post sequence. Based on the devicetree
* setting, we set the appropriate PsfUnlock policy in FSP,
* do the changes and then lock it back in coreboot during finalize.
*/
tconfig->PchSbAccessUnlock = (config->HeciEnabled == 0) ? 1 : 0;
soc/intel/common/block: Add common chip config block Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09 11:25:09 +02:00
if (get_lockdown_config() == CHIPSET_LOCKDOWN_COREBOOT) {
soc/intel/skylake: Add LPC and SPI lock down config option This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-17 12:19:58 +02:00
tconfig->PchLockDownBiosInterface = 0;
params->PchLockDownBiosLock = 0;
params->PchLockDownSpiEiss = 0;
/*
* Skip Spi Flash Lockdown from inside FSP.
* Making this config "0" means FSP won't set the FLOCKDN bit
* of SPIBAR + 0x04 (i.e., Bit 15 of BIOS_HSFSTS_CTL).
* So, it becomes coreboot's responsibility to set this bit
* before end of POST for security concerns.
*/
params->SpiFlashCfgLockDown = 0;
}
soc/intel/skylake: permit Kconfig to set subsystem ID This change permits the subsystem ID to be specified via Kconfig for the devices on the SoC. Some devices are getting zero'ed subsystem IDs because the unset (and thus zero'ed) config options are overwriting the fsp defaults. With this change the fsp defaults will only be overwritten by non-zero config values. Change-Id: I0f7bb8e465f55e5dd6d8e0fad71b9b2a22f089dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-07-23 21:44:15 +02:00
/* only replacing preexisting subsys ID defaults when non-zero */
src: Fix the warning "type 'hex' are always defined" This is spotted using "./util/lint/kconfig_lint" While at it, do the check in C and not the preprocessor. Change-Id: Icfda267936a23d9d14832116d67571f42f685906 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-23 12:04:43 +01:00
if (CONFIG_SUBSYSTEM_VENDOR_ID != 0) {
params->DefaultSvid = CONFIG_SUBSYSTEM_VENDOR_ID;
params->PchSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID;
}
if (CONFIG_SUBSYSTEM_DEVICE_ID != 0) {
params->DefaultSid = CONFIG_SUBSYSTEM_DEVICE_ID;
params->PchSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID;
}
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->PchPmWolEnableOverride = config->WakeConfigWolEnableOverride;
params->PchPmPcieWakeFromDeepSx = config->WakeConfigPcieWakeFromDeepSx;
params->PchPmDeepSxPol = config->PmConfigDeepSxPol;
soc/intel/skylake: Disable s0ix if not enabled in devicetree There is an enable_s0ix config option in the devicetree that should be used to disable it when not set: - do not export C8/C9/C10 C-states in _CST - do not enable SLP_S0 in FSP BUG=chrome-os-partner:58666 TEST=test on eve board to ensure that OS only sees 3 ACPI C-states instead of 6 and that it no longer attempts to enter C10 Change-Id: I90e4dc776d1d17d0b700cda63c8476786cd2e4ff Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18394 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-18 02:16:43 +01:00
params->PchPmSlpS0Enable = config->s0ix_enable;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
params->PchPmSlpS3MinAssert = config->PmConfigSlpS3MinAssert;
params->PchPmSlpS4MinAssert = config->PmConfigSlpS4MinAssert;
params->PchPmSlpSusMinAssert = config->PmConfigSlpSusMinAssert;
params->PchPmSlpAMinAssert = config->PmConfigSlpAMinAssert;
params->PchPmLpcClockRun = config->PmConfigPciClockRun;
params->PchPmSlpStrchSusUp = config->PmConfigSlpStrchSusUp;
params->PchPmPwrBtnOverridePeriod =
config->PmConfigPwrBtnOverridePeriod;
params->PchPmPwrCycDur = config->PmConfigPwrCycDur;
soc/intel/skylake: indicate voltage margining enabled/disabled Support for voltage margining is dependent on the platform. Enabling voltage margining puts additional constraints for the SLP_S0# to be asserted and hence moving to S0ix state. If the platform PMIC/VR supports PCH voltage reduction, voltage marigining can be enabled. Use the UPD provided by FSP to enable/disable voltage margining. Change-Id: Iea214e9d7d6126e8367426485c6446ced63caa66 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18469 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-23 10:13:39 +01:00
/* Indicate whether platform supports Voltage Margining */
params->PchPmSlpS0VmEnable = config->PchPmSlpS0VmEnable;
soc/intel/skylake: Unify serial IRQ options We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-23 19:24:51 +01:00
params->PchSirqEnable = config->serirq_mode != SERIRQ_OFF;
params->PchSirqMode = config->serirq_mode == SERIRQ_CONTINUOUS;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
soc/intel/common: Remove common chip config use_fsp_mp_init This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-19 13:32:17 +01:00
params->CpuConfig.Bits.SkipMpInit = !CONFIG_USE_INTEL_FSP_MP_INIT;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
soc/intel/common/block: Add common chip config block Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09 11:25:09 +02:00
for (i = 0; i < ARRAY_SIZE(config->i2c_voltage); i++)
soc/intel/skylake: move i2c voltage config to own variable In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-10 00:04:15 +01:00
params->SerialIoI2cVoltage[i] = config->i2c_voltage[i];
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
for (i = 0; i < ARRAY_SIZE(config->domain_vr_config); i++)
fill_vr_domain_config(params, i, &config->domain_vr_config[i]);
/* Show SPI controller if enabled in devicetree.cb */
soc/intel: Replace uses of dev_find_slot() To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03 06:25:59 +02:00
dev = pcidev_path_on_root(PCH_DEVFN_SPI);
soc/skylake: prevent null pointer dereferences Change-Id: Ide10223e7fc37a6c4bfa408234ef3efe1846236a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-30 22:14:18 +02:00
params->ShowSpiController = dev ? dev->enabled : 0;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
soc/intel/skylake: Limit xDCI feature when VBOOT is enabled Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26 11:24:18 +02:00
/* Enable xDCI controller if enabled in devicetree and allowed */
soc/intel: Replace uses of dev_find_slot() To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03 06:25:59 +02:00
dev = pcidev_path_on_root(PCH_DEVFN_USBOTG);
soc/skylake: prevent null pointer dereferences Change-Id: Ide10223e7fc37a6c4bfa408234ef3efe1846236a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-30 22:14:18 +02:00
if (dev) {
if (!xdci_can_enable())
dev->enabled = 0;
params->XdciEnable = dev->enabled;
} else {
params->XdciEnable = 0;
}
soc/intel/skylake: Limit xDCI feature when VBOOT is enabled Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26 11:24:18 +02:00
soc/intel/skylake: enable GMM in devicetree Enables Gaussian Mixture Model (GMM) only if the corresponding pci device is enabled in the device tree Tested on Asrock H110M DVS motherboard Change-Id: I21409adf85b70bccc30dd8e12a03ad7921544b3c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-30 17:04:02 +02:00
/* Enable or disable Gaussian Mixture Model in devicetree */
dev = pcidev_path_on_root(SA_DEVFN_GMM);
params->GmmEnable = dev ? dev->enabled : 0;
soc/intel/skylake: Use SendVrMbxCmd1 for FSP 2.0 In FSP 2.0 the UPD to send extra VR Mailbox commands is switched from SendVrMbxCmd to SendVrMbxCmd1. Use the same in silicon initialization. Change-Id: I46bd50c9acc0456e2483f20ccb5e9ec2a0de232a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/17578 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23 10:55:19 +01:00
/*
* Send VR specific mailbox commands:
* 000b - no VR specific command sent
* 001b - VR mailbox command specifically for the MPS IMPV8 VR
soc/intel/skylake: Fix remaining issues detected by checkpatch Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: Macros with complex values should be enclosed in parentheses ERROR: "foo * bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '=' (ctx:VxW) WARNING: space prohibited between function name and open parenthesis '(' WARNING: storage class should be at the beginning of the declaration WARNING: char * array declaration might be better as static const WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks WARNING: else is not generally useful after a break or return WARNING: static const char * array should probably be static const char * const TEST=Build for glados Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18868 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17 01:08:03 +01:00
* will be sent
soc/intel/skylake: Use SendVrMbxCmd1 for FSP 2.0 In FSP 2.0 the UPD to send extra VR Mailbox commands is switched from SendVrMbxCmd to SendVrMbxCmd1. Use the same in silicon initialization. Change-Id: I46bd50c9acc0456e2483f20ccb5e9ec2a0de232a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/17578 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23 10:55:19 +01:00
* 010b - VR specific command sent for PS4 exit issue
* 100b - VR specific command sent for MPS VR decay issue
*/
params->SendVrMbxCmd1 = config->SendVrMbxCmd;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
soc/intel/skylake: Add config for mbx command for Intersil VR C-state issues Config for activating VR mailbox command for Intersil VR C-state issues. 0 - no mailbox command sent. 1 - VR mailbox command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. BUG=b:65499724 BRANCH=none TEST= build and boot soraka. Change-Id: Ibcced31b7ba473ffa7368c90c945d07a81a368d4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21680 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-25 14:05:15 +02:00
/*
* Activates VR mailbox command for Intersil VR C-state issues.
* 0 - no mailbox command sent.
* 1 - VR mailbox command sent for IA/GT rails only.
* 2 - VR mailbox command sent for IA/GT/SA rails.
*/
params->IslVrCmd = config->IslVrCmd;
intel/skylake: Add devicetree settings for acoustic noise mitigation Add options to the skylake chip config that will allow tuning the various settings that can affect acoustics with the CPU and its VRs. These settings are applied inside FSP, and they can adjust the slew slew rate when changing voltages or disable fast C-state ramping on the various CPU VR rails. BUG=b:35581264 BRANCH=none TEST=these are currently unused, but I verified that enabling the options can affect the acoustics of a system at runtime. Change-Id: I6a8ec0b8d3bd38b330cb4836bfa5bbbfc87dc3fb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18662 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-08 04:12:02 +01:00
/* Acoustic Noise Mitigation */
params->AcousticNoiseMitigation = config->AcousticNoiseMitigation;
params->SlowSlewRateForIa = config->SlowSlewRateForIa;
params->SlowSlewRateForGt = config->SlowSlewRateForGt;
params->SlowSlewRateForSa = config->SlowSlewRateForSa;
params->FastPkgCRampDisableIa = config->FastPkgCRampDisableIa;
params->FastPkgCRampDisableGt = config->FastPkgCRampDisableGt;
params->FastPkgCRampDisableSa = config->FastPkgCRampDisableSa;
soc/intel/skylake: Add option to disable host reads to PMC XRAM FSP disables host access to shadowed PMC XRAM registers by default, it also provides a UPD to enable/disable host reads to these regiters. Expose the same in devicetree as a config option. Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-10 11:28:24 +01:00
/* Enable PMC XRAM read */
tconfig->PchPmPmcReadDisable = config->PchPmPmcReadDisable;
soc/intel/skylake: Add option to enable/disable EIST Set MSR 0x1A0 bit[16] based on EIST config option. Default Hardware Managed P-state (HWP) also known as Intel Speed Shift is enabled on SKL hence disable EIST and ACPI P-state table. Change-Id: I2b7374a8a04b596edcc88165b64980b7aa09e2a7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-12 08:13:57 +02:00
/* Enable/Disable EIST */
tconfig->Eist = config->eist_enable;
soc/intel/skylake: make tcc_offset take effect Currently, "tcc_offset" defined in devicetree is overwritten by Intel FSP-S UPD "TccActivationOffset". This patch will make "TccActivationOffset" refer to "tcc_offset". TEST=check if MSR (0x1a2[29:24]) value is updated with "tcc_offset" by iotools (rdmsr 0 0x1a2). Change-Id: Ibc6f33bea19a1d59bc7e407815210942b38f0702 Signed-off-by: marxwang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/22818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-11 07:57:49 +01:00
/* Set TccActivationOffset */
tconfig->TccActivationOffset = config->tcc_offset;
soc/skylake: Write the P2SB IBDF and HBDF registers in coreboot Do it in coreboot code instead of letting FSP do it. Change-Id: Ic5e8a62141608463ade398432253bad460a9a79d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-08-30 20:05:33 +02:00
/* Already handled in coreboot code, so tell FSP to ignore UPDs */
params->PchIoApicBdfValid = 0;
soc/intel/skylake: Enable VT-d and X2APIC We use the usual static addresses 0xfed90000/0xfed91000 for the GFX IOMMU and the general IOMMU respectively. These addresses have to be configured in MCHBAR registers (maybe, who knows, the blob is undocu- mented), advertised to FSP and reserved from the OS. The new devicetree option `ignore_vtd` allows to retain the old beha- viour (do whatever pre-set UPD values suggest). We also let FSP set up distinct BDFs for messages originating from the I/O-APIC and the HPET. Change-Id: I77f87c385736615c127143760bbd144f97986b37 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-19 09:36:03 +02:00
/* Enable VT-d and X2APIC */
if (!config->ignore_vtd && soc_is_vtd_capable()) {
params->VtdBaseAddress[0] = GFXVT_BASE_ADDRESS;
params->VtdBaseAddress[1] = VTVC0_BASE_ADDRESS;
params->X2ApicOptOut = 0;
tconfig->VtdDisable = 0;
}
soc/intel/skylake: set FSP param to enable or skip GOP Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to enable or skip GOP. Change-Id: I5731003c8a094c4d108efbea14d31d335758bbb7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36350 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26 10:44:33 +02:00
dev = pcidev_path_on_root(SA_DEVFN_IGD);
if (CONFIG(RUN_FSP_GOP) && dev && dev->enabled)
params->PeiGraphicsPeimInit = 1;
else
params->PeiGraphicsPeimInit = 0;
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
soc_irq_settings(params);
skylake: Add initial FSP2.0 support Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-23 11:01:23 +02:00
}
soc/intel/skylake: Use Broadwell as comparision base for Skylake SOC Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-13 03:19:47 +02:00
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
/* Mainboard GPIO Configuration */
compiler.h: add __weak macro Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-21 22:45:32 +02:00
__weak void mainboard_silicon_init_params(FSP_S_CONFIG *params)
soc/intel/skylake: Add FSP 2.0 support in ramstage Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-30 17:17:13 +02:00
{
printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__);
}
{drivers,soc}/intel/fsp2_0: Move chipset specific logo handling to SoC FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which are chipset specific. Create soc_load_logo() which will pass the logo pointer and size. This function will call fsp_load_logo which will load the logo. BUG=NA TEST= Build and verified logo is displayed on Facebook Monolith Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-17 14:10:16 +01:00
/* Handle FSP logo params */
const struct cbmem_entry *soc_load_logo(FSPS_UPD *supd)
{
return fsp_load_logo(&supd->FspsConfig.LogoPtr, &supd->FspsConfig.LogoSize);
}
Reference in a new issue Copy permalink