The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems,
based on a modern Kabylake CPU. It also ships with no firmware protection,
(IFD is fully unlocked, no protected regions are set, no Bootguard),
making it an ideal coreboot target. This port is based on the support for
the Skylake-based Purism Librem 13v3, with the following significant
changes:
* EC firmware is contained within the system SPI flash, and so a blob of
EC firmware must be injected to a defined location during image build.
* GPIO layout is different - this is currently just a raw import of the
GPIO configuration from the vendor firmware
* The system has two DIMMs, so an additional SPD address has been added
* The USB port layout is different
* The EC must be enabled at boot time through SuperIO-style logical device
configuration
* EC register layout is different, necessitating changes in the ACPI tables
* The HDA pins are different
* The genx_dec config is different
All hardware appears to work as expected, although the SD reader is
untested.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:
- Hillel: 32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics
This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.
Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There seems to be no board using this, but some currently under review.
Remove the DSDT, which doesn't work together with the SSDT ACPI
code generation. Also update the documentation pointing to the SSDT
generator.
Change-Id: I8b7daeadaaac93d74ee2fc9eb18f0eff5ef50eb3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
austin-3 was a devel board, retracting
t60 comes in variants with discrete gpu and only intel gpu one
Change-Id: Ic1f7397b8676bdcc15f63d59d87518d35bba5b4d
Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Changes allow to use the integrated panel logic (power sequen-
cing and backlight control) for more connectors. The Kconfigs
GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set
to any port, e.g.
config GFX_GMA_PANEL_1_PORT
default "DP3"
Now that the panel logic is not tied to the `Internal` port
choice anymore, we can properly split it into `LVDS` and `eDP`.
This also adds Comet Lake PCI IDs which should still work the
same as Kaby and Coffee Lake.
Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Add a common page about Montevina ThinkPads.
- Describe how to disable ME and remove its firmware on these models.
- Describe vendor flash layouts.
Thanks to swiftgeek for his help when writing this, especially the last
paragraph and flash layouts.
Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is a port of https://review.coreboot.org/c/coreboot/+/22337 to the
Haswell northbridge. This code is necessary to support the dGPU of the
t440p. Code was cut and pasted from Sandy Bridge with vendor IDs updated
to the correct Haswell values. Tested on t440p with dGPU on Ubuntu
18.04.4 with 5.3.0-28 kernel. Without patches dmesg reports Nouveau is
unable to read the VBIOS of the dGPU as it has an invalid checksum (I
checked that the ROM in CBFS is correct). With this patch DRM works
correctly with both the Nouveau driver and the Nvidia proprietary
driver. Windows 10 1909 also tested but generates bluescreen once GPU
driver is loaded.
Change-Id: Ie5f089fb6fd774e6c61f4f9281e2945bd44edf27
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
It somehow creeps into `make clean`, but is not used at all. Since no
VIA platform remains in coreboot, drop the utility as well.
Change-Id: Ia7e11379a6db650b5190a056226a9101c2be7dec
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add new helper function in the acpigen library, that use the underlying
soc routines.
Change-Id: I8d65699d3c806007a50adcb51c5d84567ce451b7
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Add a small description about Heads.
Change-Id: I2e768a640751fee1b1b5df4401205e24cde0607c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a tutorial how to use ME cleaner, and give some basic steps to
strip the ME. Update the Lenovo Sandy Bridge documentation that no
issues could be observed on X220 and give an example flash layout.
Tested on Lenovo X220 with stripped ME and found no issues:
commit: cbc5b99ac9
* Displayport
* VGA
* USB
* Bluetooth
* Wifi
* Wifi-kill switch
* libgfxinit
* SATA
* Audio
* SD-card
* Ethernet
* Keyboard
* Fn-Keys
* Display brightness
* ACPI S3 resume
* Battery events
* CPU temperature reporting
* FAN managment
* Stress test stable
* Youtube videos over Wifi
* stress -c 2 -m 1 -d 1
* glxgears
Change-Id: I0b1d04f00b5dbb38cf04333f2b345749b740a375
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39129
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The coverity project is done, for the most part, so drop it. Expand
a bit on the scope of the toolchain binary project, and point out
that the Ghidra project already has code from GSoC 2019 but could be
developed further.
Change-Id: I7342cc3133494f69b175b11b1f8342a0f40840e7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Currently, tables on this page are formatted as code blocks with
ASCII tables. Make it real beautiful tables.
Change-Id: I3c46477352b8151f3b0fb0616f909531a0a15c34
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
- Fix lists markup
- Some minor fixes in the text (e.g. lowercases)
Change-Id: I812bdbeed6609c31f3428a3020fa4b32ebbb3445
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38948
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Latest Sphinx supports up path traversal in markdown. Replace old
RST code that's no longer needed to prevent it being copy and pasted.
Change-Id: Ieec5cc1f8d91a7fbc003efae465f61e6b72b39dc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Replace xx30 with Ivy_Bridge and xx20 with Sandy_Bridge.
Also add a note that the Ivy_Bridge tutorial doesn't covert T430s and T431s.
Change-Id: I0b65bca83195ec22cc139130e7cb6183c0972484
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Id12ec4d5f11f4285a1379cf32a5d0f6cd2ce9e70
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38519
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add additional information on non-debian cli tools
* Improve spellings and descriptions to the best of my knowledge
Adding info about needed tools in other distribution's package
managers was requested at the coreboot beginner's workshop at 36C3.
Change-Id: Ifff3c8354b4bec9f195f075eb6b2f377195fc237
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The Picasso no longer intends to implement a hybrid romstage,
opting instead for a more traditional bootblock/romstage/ramstage.
Update the documentation to reflect this. Clarify additional
details that have come to light since the last revision.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I6c98c007ddb8a4a05810f19e4215bde719de7bb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This has been implemented last year.
Change-Id: I24e40a7a9a9d7238b8c9d34656d5b62a26b8252b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38533
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both versions are correct, but especially for one liners indenting them
with four spaces instead of using ``` blocks helps readability of the
source file.
Change-Id: Ie2543c8c4cccefd74e966f784e651ed7dc3a9252
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38720
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the security document to reflect the current state of the
coreboot implementation.
Add more detail and document the change to the public vboot API.
BUG=N/A
TEST=build
Change-Id: I228d0faae0efde70039680a981fea9a436d2384f
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38591
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update to reflect the beta status of the code.
BUG=N/A
TEST=build
Change-Id: I9d1c42d24578c9420569da7e294d5c723da3c772
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add description of the procedure to create the flash components for this
system.
BUG=N/A
TEST=N/A
Change-Id: I2690dfbe715fa120f840d98c57fdc3fd7e8b45b1
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support
in coreboot is developed by System76 and provided as the default
firmware option. Testing is done on a pre-production model expected to
be identical from a firmware perspective to the production model.
Working:
- Payload
- Tianocore
- CPU
- Intel i7-10510U
- Intel i5-10210U
- EC
- ITE IT5570E running https://github.com/system76/ec
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend/resume
- Touchpad
- GPU
- Intel UHD Graphics 620
- GOP driver is recommended, VBT is provided
- eDP 14-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD
- Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM
- Networking
- M.2 PCIe/CNVi WiFi/Bluetooth
- Sound
- Realtek ALC293D
- Internal speaker
- Internal microphone
- Combined headphone/microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe/SATA SSD-1
- M.2 PCIe/SATA SSD-2
- RTS5227S MicroSD card reader
- USB
- 1280x720 CCD camera
- USB 3.1 Gen 2 Type-C (left)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
Not working:
- TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0
are not currently supported by the intel fast_spi driver.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The new documentation describes typical ways that mainboards will
set up their GPIOs, as well as the distinction between "early"
and "normal" GPIOs. It also describes the typical properties
that GPIO configuration will cover.
Change-Id: I279eec4ed2bb0248a2bdb363fb73b40b8272267f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Also update the known-good versions of the needed tools.
Change-Id: I0f63860beb0a8a00360752318236e302c7170977
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37952
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add function to generate unique _UID using CRC32
* Add function to write the _UID based on a device's ACPI path
ACPI devices that have the same _HID must use different _UID.
Linux doesn't care about _UID if it's not used.
Windows 10 verifies the ACPI code on boot and BSODs if two devices
with the same _HID share the same _UID.
Fixes BSOD seen on Windows 10.
Change-Id: I47cd5396060d325f9ce338afced6af021e7ff2b4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The BMC and tools interacting with it depend on metadata placed inside
the ROM in order the flash the BIOS.
Add a new tool smcbiosinfo, integrate it into the build system, and
generate a 128byte metadata file called smcbiosinfo.bin on build.
You need to provide the BoardID for every SMC mainboard through a new
Kconfig symbol: SUPERMICRO_BOARDID
Some fields are unknown, but it's sufficient to flash it using SMC
vendor tools.
Tested on Supermicro X11SSH:
* Flashing using the WebUI works
* Flashing using SMCIPMITool works
No further validation is done on the firmware.
Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Substitute `Part` with `Step` on this file's headings and use present
tense instead of gerund.
Change-Id: Ic130ed9865be43716e7de3121534761d9fc2ae8d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Make sure all titles are capitalized, and add a missing period.
Change-Id: I48b8d6c85b915cc422bdfa3a89804f92f46800ba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Use periods on every element of a list, and make `IRC` uppercase.
Also, correct a grammar mistake that slipped through.
Change-Id: Id05865719c7c845265416e89bfd9b02b6d22ca6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
* Make use of introduced SSDT config mode access
* Make use of introduced SSDT mutex
* Provide ACPI functions to safely access SIO config space
* Implement method to query LDN enable state
* Implement method to set LDN enable state
* Use introduced functions to implement _DIS and _STA in the device
* Update documentation
Tested on Aspeed AST2500 and Linux 5.2.
Manually verified ACPI code that generates no errors in Linux.
Change-Id: I520b29de925f368cd71ff8f1f58d2d57d72eff8d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make it part of the release process to note not only what config flags /
code properties etc will be deprecated, but to also spell out which
boards would be affected at the time of the release.
Change-Id: I0ef1404e75182ea4bacae31edb0a843e7a359545
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37702
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The table wasn't pretty enough so sphinx complained, while the second
paragraph had trailing whitespace, could be wrapped differently and
also came with a typo.
Change-Id: I6c16a3a1fcc306d0b12043ebec7d4e69e9339d7d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Disabling SSL verification is far from optimal, but depending on the
circumstances may be the most practical way, so describe how to do
that instead of leaving users confused.
It's also not _that_ bad because git's hashing scheme should uncover
most attempts to tamper with code, either when checking signed tags
or when people push (and see lots of modified commits).
State the command in a way that isn't conductive to careless
copy & paste.
Change-Id: Idbd52ba5d6e8b0f0e891fca16e4159ccef10771a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We are already in documentation so it should be obvious that other
links point to other documentation.
Change-Id: I7a021a09bdb88418ec85dbf433465f26445057d0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The board is booting Linux and has been briefly tested.
SeaBIOS, TianoCore payload and Linux as payload all seem to work fine.
BUG=N/A
TEST=tested on Facebook Monolith
Change-Id: I65a2e03334af65cfb3f825d43fa0daa6e6c75913
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
This documents the smmstore API.
Change-Id: I992c04c0cf9b3f03755cf3fede2c82c6471a5ef4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch does two things:
- The CLI and Git Cola sections contained some duplicated information
about pushing patches, which is now factored out into its own section.
- The draft workflow is now disabled, so that part has been reworded to
describe how to submit a private patch.
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Change-Id: I562c101ab2ee78d901be7e99165daba7473dc3c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Having the release notes mostly ready one week before the release
allows for better review.
Some statistics, the actual release date and commit ID can only be
filled in on release day, but there's a tried & true technique for
that: placeholders.
It's also a nice touch to have the release notes of a release within
its source tarballs, so push them right before creating the release
(since changes in Documentation/releases won't break coreboot in
any way).
Change-Id: Iad7ba1ba4fc841bf437f2a997428b7f636e15422
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36957
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MIPS architecture port has been added 5+ years ago in order to
support a Chrome OS project that ended up going nowhere. No other board
has used it since and nobody is still willing or has the expertise and
hardware to maintain it. We have decided that it has become too much of
a mainenance burden and the chance of anyone ever reviving it seems too
slim at this point. This patch eliminates all MIPS code and
MIPS-specific hacks.
Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After removing urara no board still uses this SoC, and there are no
plans to add any in the future (I'm not sure if the chip really exists
tbh...).
Change-Id: Ic4628fdfacc9fb19b6210394d96431fdb5f8e8f1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36491
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fill in some stats using our repo analysis scripts in
util/release/, thank the contributors, add some prose
about notable achievements since 4.10.
Also start a new doc for 4.12.
Change-Id: I10a39081762d6e01f4040f717d36662975e4c8e9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36948
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The mainboard was accidently added due to bad rebase.
Change-Id: Ie7215e551651dbbc8d92316c48e455405923a30b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36077
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The microcode is available in 3rdparty microcode now.
This ucode can be used.
BUG=N/A
TEST=build
Change-Id: I52a04c7dc97608f868ee0b415bbbb328937f18f7
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The microcode is available in 3rdparty microcode now.
This ucode can be used.
BUG=N/A
TEST=build
Change-Id: I1d83a58e9051fa9402666f05e4f2c43e76026dfb
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36854
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this change cbfs_boot_locate will check the RO (COREBOOT) region if
a file can not be found in the active RW region. By doing so it is not
required to duplicate static files that are not intended to be updated
to the RW regions.
The coreboot image can still be updated by adding the file to the RW
region.
This change is intended to support VBOOT on systems with a small flash
device.
BUG=N/A
TEST=tested on facebook fbg1701
Change-Id: I81ceaf927280cef9a3f09621c796c451e9115211
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36545
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for x86_64 bootblock on qemu.
Introduce a new approach to long mode support. The previous patch set
generated page tables at runtime and placed them in heap. The new
approach places the page tables in memory mapped ROM.
Introduce a new tool called pgtblgen that creates x86 long mode compatible
page tables and writes those to a file. The file is included into the CBFS
and placed at a predefined offset.
Add assembly code to load the page tables, based on a Kconfig symbol and
enter long in bootblock.
The code can be easily ported to real hardware bootblock.
Tested on qemu q35.
Change-Id: Iec92c6cea464c97c18a0811e2e91bc22133ace42
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The document isn't included in any toc-tree due to a typo.
Change-Id: Ic1491dde2d48b5d004fc28c743bbee6de12f433c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36540
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD has generated a simpler and more flexible license agreement for
using proprietary precompiled binary images. The new agreement is
intended to cover all blobs in the directory structure below where
the license resides and eliminates any unique agreements previously
provided for individual products.
Add a description of the repo, as well as the license agreement it
contains.
Change-Id: Ia3dbc1a5259a2512281ea87b7e55fb3134b3b3c5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The code is based on autoport.
This port is tested on a T440p without a dGPU and can boot Arch Linux
from SATA disk with SeaBIOS payload. The tested components and issues
are in the documentation.
Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Using docker to build to documentation eases the process of building
the documentation. Given that some versions of sphinx are
incompatible, the option to use docker is presented first.
Change-Id: I6c18f81a829364ada1859c04ba2dc4f886934bcc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36105
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- This port should be Reclaim Your Freedom compliant
(not certified yet).
- Untested on boards with external Radeon graphics adapter.
- Some columns on the left-most side of display are completely
black on 1400x1050 IPS display[1]. Display works fine on Linux.
I don't know why it appears like that. So far it has been observed
only with native graphics initialization.
- Only GRUB2 and SeaBIOS payloads tested for now.
- 2504 docking station USB doesn't work under Linux.
Can detect pendrive in GRUB2 payload.
- Sometimes it takes 20s of "pretending it's powered off" to run
coreboot code. Issue is payload agnostic.
Probably caused by missing one capacitor on my unit.
[1] https://imgur.com/a/0wpMGsm
Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The manifest example has to be marked as code. The Manifest parsing
section header should be L2 and finally # is a special character in
markdown.
Change-Id: I38cb1a508ec9ccb39cb39048de3742a5cb595f7b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This adds another x11 series board, the X11SSM-F, which is similiar to
X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and
Ethernet interfaces.
Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
I originally put up this document for discussion in 2015
(mailing list: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/FXX4V2OSXAQC4B2VUENSFZEWRPPOVRH2/)
(doc: https://docs.google.com/document/d/1o2bFl5HCHDFPccQsOwa-75A8TWojjFiGK3r0yeIc7Vo/edit)
It may be time to revisit the way we define our image layouts now that
there are new fmap schemes for new vboot uses. The approach outlined in
this document may or may not be the right one, but it's something we
have, so let's discuss.
Compared to the doc, this will
* be updated (things changed in the last 3.5 yearws)
* integrate feedback to the doc and on the mailing list back then
Change-Id: Ib40d286e2c9b817f55e58ecc5c9bc8b832ac5783
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iddcef560c1987486436b73ca1d5fc83cee2f713c
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
It is similar to X200s, with U-series CPU, slightly different gpio
setup, no docking support, and no superio chip.
Tested:
- CPU Core 2 Duo U9400
- Slotted DIMM 4GiB*2 from samsung
- Camera
- pci-e slots
- sata and usb2
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from
Linux payload (Heads) and Seabios.
TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in
CB:4294 ) for h8-using devices without a dock.
Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It turned on some SKUs FSP hangs in Notify stage if IIO root ports are
disabled after MemoryInit. To address that hide IIO root ports earlier
in romstage.
TEST=the patch was ran on affected HW and success was reported
Change-Id: I6a2a405f729df14f46bcf34a24e66e8ba9415f9d
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written
when already locked by the sibling thread. In addition it loads microcode
updates on all threads.
To prevent such race conditions only call the code on one thread, such
that the MSRs are only written once per core and the microcode is only
loaded once for each core.
Also add comments that describe the scope of the MSR that is being
written to and mention the Intel documents used for reference.
Fixes crash in SGX MP init.
Tested on Supermicro X11SSH-TF.
Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The port is based on the x201 / t410s.
2537-vg5 / i5, no discrete gpu
Tested and working:
* Native raminit
* Native gfxinit
* Booting Seabios 1.12.1
* Booting from EHCI
* Running GNU/Linux 5.0.0
* No errors in dmesg
* EHCI debug on the devices left side, bottom-right
* Keyboard
* Fn keys (Mute, Volume, Mic)
* Touchpad
* TPM
* Wifi
* Sound
* USB
* Ethernet
* S3 resume
* VBOOT
Testing in progress.
Untested:
* VGA
* Displayport
* Docking station
Bugs:
* AC adapter can't be read from ACPI
* TPM not working with VBOOT and C_ENV BB
Details for flashing externally:
1. Disconnect all power
2. Connect the external flasher
3. Connect the power cord (This fixes internal power control)
4. Remove the power cord
Change-Id: Id9d872e643dd242e925bfb46d18076e6ad100995
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/11791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Also get rid of some manual hyphenation.
Change-Id: Ibeb4eceeae48cf375171d0261ed9475010b0d5b1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The format was retired 10 years ago when we moved to the new build
system, kconfig and sconfig. Retire the doc as well.
Change-Id: Ica1c353a80d411845b92038521d85ad5f3d359bc
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Fixes an issue with amd/index.md not being part of a toctree
Change-Id: Id419695d24a49951afb844c81cc0951d6920e0d2
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This splits the x11-lga1151-series' documentation into a generic and a
board specific section as a preparation for CB:35427.
Additionally this adds some more information on the x11ssh board.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add an option to ifdtool which validates that the flash regions defined
in the descriptor match the coresponding areas in the FMAP.
BUG=chromium:992215
TEST=Ran 'ifdtool -t' with a good bios image and verify no issues
run 'ifdtool -t' with a bad bios image and verify expected issues
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: Idebf105dee1b8f829d54bd65c82867af7aa4aded
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Create documentation on padmelon, including how to program the SPI. Also
include an index.md pointing to the documentation, as currently there's no
maiboard documentation folder for AMD.
BUG=none.
TEST=none.
Change-Id: I1a684c1acd3fb9441df71e2bc0fffa6131148b98
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most of the X11 boards with socket LGA1151 are basically the same boards
with just some minor differences like different NICs (1 GbE, 10 GbE),
number of NICs / PCIe ports etc.
There are about 20 boards that can be added, if there is a community for
testing.
To be able to add more x11 boards easily like x11ssm (see CB:35427) this
restructures the x11ssh tree to represent a "X11 LGA1151 series". There
were multiple suggestions for the structure like grouping by series
(x10, x11, x...), grouping by chipset or by cpu family.
It turned out that there are some "X11 series" boards that are
completely different. Grouping by chipset or cpu family suffers from the
same problem. This is why finally we agreed on grouping by series and
socket ("X11 LGA1151 series").
The structure uses the common baseboard scheme, while there is no "real"
baseboard we know of. By checking images, comparing logs etc. we came to
the conclusion that Supermicro does have some base layout which is only
modified a bit for the different boards.
X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we
expect the other boards to have mostly the same device tree, there is a
common devicetree that gets overridden by each variant's overridetree.
Besides that some very minor modifications happened (formatting, fixing
comments, ...) but not much.
Documentation is reworked in CB:35547
Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Eltan is missing in the vendor index.
Documentation of the eltan vendorcode is availlabe already.
Add eltan to vendor index.
BUG=N/A
TEST=N/A
Change-Id: I51fe64da91499f0ea7bf97fc240f4e263470c146
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Remove duplicate headings, move vendor sections that were placed
amidst other vendor hierarchies, and while we are at it, sort it
alphabetically.
Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We generally try to stay away from ascribing attributes to (future)
devs. "Rookie guide" refers to the reader, while "tutorial" refers
to the material.
In the same spirit, move from "lessons" to "parts". It's not school :-)
Change-Id: I11a69a2a05ba9a0bc48f8bf62463d9585da043ec
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add a generic SuperIO ACPI generator, dropping the need to include
additional code in DSDT for SuperIO.
It generates a device HID based on the decoded I/O range.
Tested on Supermicro X11SSH-TF using AST2400.
The SSDT contains no errors and all devices are present.
Possible TODOs:
* Add "enter config" and "exit config" bytes
* Generate support methods to enter and exit config mode
* Generate support methods to query, change or disable current
resource settings on specific LDNs
Change-Id: I2716ae0580d68e5d4fcc484cb1648a2cdc1f4ca0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Line length limit was bumped to 96 characters, but the coding style did
not reflect such a change.
Change-Id: Ifdbb8bc04e49e1fbe9b0c8a642ae814d5a60004a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
* Add Kconfig to enable TXT
* Add possibility to add BIOS and SINIT ACMs
* Set default BIOS ACM alignment
* Increase FIT space if TXT is enabled
The following commits depend on the basic Kconfig infrastructure.
Intel TXT isn't supported until all following commits are merged.
Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Add support for the X11SSH-TF which is based on Intel KBL.
Working:
* SeaBIOS payload
* LinuxBoot payload
* IPMI of BMC
* PCIe, SATA, USB and M.2 ports
* RS232 serial
* Native graphics init
Not working:
* TianoCore doesn't work yet as the Aspeed NGI is text mode only.
* Intel SGX, due to random crashes in soc/intel/common
For more details have a look at the documentation.
Please apply those patches as well for good user experience:
Ica0c20255f661dd61edc3a7d15646b7447c4658e
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This removes the need for COREBOOT_BUILD_DIR in Kconfig. Since the
original files will be replaced with the tmp file, the parent directory
already needs to be writable.
Before this change, the tmp files would be created in the CWD (src) if
COREBOOT_BUILD_DIR was not specified.
BUG=b:112267918
TEST=emerge-grunt coreboot and verified no tmp files were created in the
src directory.
Change-Id: Icdaf2ff3dd1ec98813b75ef55b96e38e1ca19ec7
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34244
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DRAM_SIZE_MB should be the maximum size (255GiB / -m 261120M)
that’s possible with QEMU on AArch64 virt because it tries to search
the DRAM_SIZE_MB range to find the true memory size.
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Change-Id: Id479c0b18d1e1adceecdcca13e36119b95617e6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested on qemu-riscv.
Depends on OpenSBI integration and proper memory detection in qemu.
Boots into Linux until initrd should be loaded.
Tested on SiFive/unleashed:
Boots into Linux until earlycon terminates.
Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This CL adds a new board, QEMU/AArch64, for ARMv8. The machine supported
is virt which is a QEMU 2.8 ARM virtual machine. The default CPU of
qemu-system-aarch64 is Cortex-a15, so you need to specify a 64-bit cpu
via a flag.
To execute:
$ qemu-system-aarch64 -M virt,secure=on,virtualization=on \
-cpu cortex-a53 -bios build/coreboot.rom -m 8192M -nographic
Change-Id: Id7c0831b1ecf08785b4ec8139d809bad9b3e1eec
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
John Lewis has updated his homepage to indicate he is no longer
producing coreboot images, nor supporting existing ones, so
remove the entry from the list.
Change-Id: I9b07cc4cb4adeb36eff1f904b23fb25da2c89c68
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We keep a mirror in case any of the originals disappear, but we also
have to remember to update it.
Change-Id: Ib4be91d1d508d3d5dba7ace1d167d8e528d58b3d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
We plan to retire that symbol after 4.11 as well, with relocatable
ramstage becoming the normal mode of operation.
Change-Id: I36029215e5c8726f7dcc268bddc0d2b0161e3c40
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Marc found more interesting things to do (yay, Marc!) and Martin
offered to volunteer on the arbitration board in his place.
Change-Id: Ic5bf00735afdf8942e543043238890011a82c890
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The paragraph starts talking about community organizers. By making
their definition a separate paragraph it's hopefully easier to find
what this means.
Change-Id: Icb9abbbd05b59bd4ee741d10f4c9c1a8c321b430
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Make it a separate section, emphasize that people should get support
early, note that personal interaction and email are the two best
ways to seek help.
Change-Id: I8cb613fefe1a7b4db1ee948fb9927a38f0421011
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
"Always assume" is rather final and (in some readings) invalidates the
need for the rest of the text.
Change-Id: Ibf6f776494367d012ce69a64fa928c1dd4206c0e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Initial support for Portwell PQ7-M107 (Q7) module.
Code based on Intel Strago mainboard.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107
Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Make the title for lesson 1 match the format used for lesson 2 and the
lessons index, for consistency purposes.
Change-Id: I133d758ddf4974096cbf9f10ae96c148fc859efc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
As Intel doesn't even document known bugs add a list of
FSP bugs here.
Change-Id: I07819b83fb0c9437fc237472dfe943f78738347a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34239
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Only CONFIG_USE_INTEL_FSP_MP_INIT makes a difference whether native MP
init is used or not.
Also make USE_INTEL_FSP_MP_INIT mutually exclusive with
USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI as this option requires
coreboot to set up AP and publish PPI based on it.
Change-Id: I65b80805d3cd7b66f8c9f878d3c741b98f24288d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33357
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To clear all DRAM on x86_32, add a new method that uses PAE to access
more than 32bit of address space.
Add Documentation as well.
Required for clearing all system memory as part of security API.
Tested on wedge100s:
Takes less than 2 seconds to clear 8GiB of DRAM.
Tested on P8H61M-Pro:
Takes less than 1 second to clear 4GiB of DRAM.
Change-Id: I00f7ecf87b5c9227a9d58a0b61eecc38007e1a57
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31549
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add files to introduce a memory clearing framework.
Introduce Kconfig PLATFORM_HAS_DRAM_CLEAR that is to be selected by
platforms, that are able to clear all DRAM.
Introduce Kconfig SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT that is user
selectable to always clear DRAM on non S3 boot.
The function security_clear_dram_request tells the calling platform when
to wipe all DRAM. Will be extended by TEE frameworks.
Add Documentation for the new security API.
Change-Id: Ifba25bfdd1057049f5cbae8968501bd9be487110
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Describe how to run coreboot on the PC Engines apu2 mainboard.
Change-Id: Id1d553c7f7485358960d92e714d50ba0f75b3581
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Describe how to run coreboot on the PC Engines apu1 mainboard.
Change-Id: If79693e893c4afe52bf1c9aa8017ac6f650a96e4
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
* Add chips ops for IPMI KCS.
* Get IPMI version over KCS.
* Generates ACPI SPMI table for IPMI KCS.
* Generates SMBIOS type 38 for IPMI KCS.
* Generates ACPI SPMI device for IPMI KCS on LPC device.
* Add documentation
To use this driver on BMC that support KCS on I/O:
1. Add an entry to the devicetree.cb:
chip drivers/ipmi
device pnp ca2.0 on end # IPMI KCS
end
2. Select IPMI_KCS in Kconfig.
3. (Optional) enable LPC I/O decode for the given address.
Tested on Wedge100s.
Change-Id: I73cbd2058ccdc5395baf244f31345a85eb0047d7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch adds documentation about the UP² mainboard
and the IFWI used by Apollolake platform.
Change-Id: Ic708ddbd2616eee4e5ec2740b3eac18b408bde38
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Begin a directory for AMD soc devices and add an explanation of
how Family 17h works. Newer AMD systems use a unique paradign
for initializing the x86 processors.
Change-Id: I7bd8649996add80747f6a60b9dfd35a94a560be1
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
* Add initial board commit based on HP8200 SFF.
* Add documentation.
* Serial and PCIe slot are working.
Tested on HP Z220.
Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initial support for Facebook FBG-1701 system.
coreboot implementation based on Intel Strago mainboard.
Configure 'Onboard memory manufacturer' which must match HW.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701
Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
We keep its definition in libpayload, though, to maintain compatibility
with existing payload code. For now.
Change-Id: I8fc0d0136ba2316ef393c5c17f2b3ac3a9c6328d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch contains the general files for the vendorcode/eltan that has
been uploaded recently:
- Add eltan directory to vendorcode.
- Add documentation about the support in the vendorcode directories.
- Add the Makefile.inc and Kconfig for the vendorcode/eltan and
vendorcode/eltan/security.
BUG=N/A
TEST=Created verified binary and verify logging on Portwell PQ-M107
Change-Id: Ic1d5a21d40b6a31886777e8e9fe7b28c860f1a80
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Document known issues with 'disabled' ME.
Change-Id: I364f3ed49341523c781eb2f3b41e866f33632a7e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32889
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also add the HP EliteBook document from wiki.
Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new post code POST_VIDEO_FAILURE used when the Intel FSP silicon
initialization returns an error when graphics was also initialized.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: Ibc7f7defbed34038f445949010a37c8e368aae20
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to
detect or initialize a required hardware component.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a new post code POST_RAM_FAILURE, used when the Intel FSP code fails
to initialize RAM.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: Ibafefa0fc0b1c525f923929cc91731fbcc1e7533
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a new post code POST_INVALID_VENDOR_BINARY, used when coreboot fails
to locate or validate a vendor supplied binary.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: Ib1e359d4e8772c37922b1b779135e58c73bff6b4
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add a new post code POST_INVALID_CBFS, used when coreboot fails to
locate or validate a resource that is stored in CBFS.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: If1c8b92889040f9acd6250f847db02626809a987
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a new post code, POST_INVALID_ROM, used when coreboot fails to
locate or validate a resource that is stored in ROM.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: Ie6de6590595d8fcdc57ad156237fffa03d5ead38
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Works:
- bootblock, romstage, ramstage
- Serial console UART0, UART1
- SPI flash console
- iGPU init with libgfxinit
- LAN1, LAN2
- USB2, USB3
- HDMI, DisplayPort
- eMMC
- flashing with flashrom externally
WIP:
- Documentation
- VGA
For some reason Seabios can not find the CBFS region
and therefore it can't load seavgabios, but generally
it is working as soon as Linux is booted.
- ACPI
Works not:
- Devices needs proper configuration
- Seabios can't find CBFS region
Untested:
- GPIO pin header
- 60 pin EXHAT
- Camera interface
- MIPI-CSI2 2-lane (2MP)
- MIPI-CSI2 4-lane (8MP)
- SATA3
- USB3 OTG
- embedded DisplayPort
- M.2 slot
- mini PCIe
- flashing with flashrom internally using Linux
Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add information about flash and programming header.
Change-Id: If34016e20dd580f92695bef5b67dd0c282b0b421
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
- The link to create an account is now "Sign in" and not "Register"
- Use monospace formatting for terminal commands and file names
- Properly escape less-than and greater-than
- Correct the 'make lint' example command
- Reformat example commit messages
- Add formatting for website links
- Other whitespace fixes
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I9931bef8c30387d1c08b59973d6de9b5c0419814
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If username is not set, then the ssh option is not available.
This was initially confusing for me.
Signed-off-by: Alan Green <avg@google.com>
Change-Id: I731c29a1daa9f8c298710471c7d1fe758b059d08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Convert the HTML document to markdown and place it under security section.
Change-Id: I212c6d0c977fd6772371ff6676478d48cc215d6e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32610
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Flashmap (FMAP) was not clearly documented. The new flashmap.md
explains where to find more details about that and how / why it was used
in coreboot. Also explained what is FMD and how to use it (based on
original README.fmaptool).
BUG=None
TEST=None (only documentation)
Change-Id: Ia389e56c632096d7c905ed221fd4f140dec382e6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Use rst parser to convert the csv to markdown tables.
Change-Id: I7fd61bd7a4e8818901520311332ae4027e7a7d02
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Allow the use of CSV files if properly referenced from markdown.
Sphinx will parse the file and create a human readable table,
allowing easy integration of autogenerated files.
Change-Id: I6fa13acf67ff1c6c9e3985054405c5446808da03
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Describe the coreboot stages, given a short introduction what is done
and add a chart for coreboot's vs EDK II bootflow as well as the source
for the SVG.
TODO: Describe stages in detail in a separate commit.
Change-Id: I98cb61b1d0d29ac9d03f5ef3644d51a8e14bad74
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
- Now there is no need to additionally configure the FSP
before building;
- PEG works with high link speed 8 GT/s (Gen 3);
- external GPU supported, but dynamic switching between iGPU and PEG
is not yet supported.
Change-Id: Ie0f9db47c0b88052b090cba139f0ae821758935d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31949
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove word splitting '-' at line breaks, since they show up within the
lines of the rendered html.
Change-Id: Ifbd43628f60057a0666fe221de1fe85f0a29cd2d
Signed-off-by: Philipp Bartsch <phil@grmr.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32147
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Patrick Rudolph