This patch adds a new configuration option to allow the compression
algorithm for the logo cbfs file to be specified. By default, the logo
cbfs file is compressed using LZMA. However, enabling LZ4 compression
can save ~2ms of boot time when the BMP_LOGO config is enabled.
This patch verified that the logo cbfs file can be booted using either
LZMA or LZ4 compression.
BUG=b:284799726
TEST=Able to boot google/rex and verified firmware splash screen using
either LZMA or LZ4 compression.
Change-Id: Ib0aa5320632ae3f734004d2b1d495af11c2e1928
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Intel has rebranded ESE as ISSE (Intel Silicon Security Engine),so all
references to ESE is updated to ISSE in the current coreboot code.
BUG=None
TEST=Build all the variants based on Intel Meteor Lake SoC
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I1f8785704706d56a35e94a0f3386bc551cd1f263
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77241
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Change the order of enabling EC and GPE wake sources, so it comes more
obvious we can use existing chromeec handlers without changes.
Change-Id: I5a10afa2b816dc8c01074be68a63114ee027c1e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74604
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Early Chromebook generations stored the information about
USB port power control for S3/S5 sleepstates in GNVS, although
the configuration is static.
Reduce code duplication and react to ACPI S4 as if it was ACPI
S5 request.
Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Increase VBT_DATA_SIZE_KB to 10 since pirrha uses bigger VBT file.
It includes MIPI power sequence data for panel.
BUG=b:295112773
BRANCH=nissa
TEST=FW_NAME=pirrha emerge-nissa coreboot
Change-Id: Ib6c293ccb4a8df3ebbd2271e7db2de4e7bd9cc3e
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77163
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:292134655
BRANCH=nissa
TEST=Boot to OS on pirrha ADV board
Change-Id: I65429ec8d30b4458511f7c0138652528aadfde25
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76892
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Implement support for elan i2c touchscreen and use fw_config
to pick between i2c or HID-over-i2c touchscreen.
BUG=b:294456574
BRANCH=firmware-nissa-15217.B
TEST=build and verified touchscreen work
Change-Id: I32ba97f5e5f6d280d1ae47da22360fde421a26c0
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This makefile had a 3-clause BSD license. Swap the full license text with an SPDX header.
Looking through the history determined that it had copyright lines,
so those were added back as the license required.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I53a746de6d2e6b60c41415531b7f261e02908b28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77151
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Update DPTF thermal settings from thermal team suggestion:
1. Modify CPU passive policy to 95.
2. Modify TS0/TS1/TS2 passive policy to 90 for CPU.
3. Modify TS1 passtve policy watt to 6w.
4. Modify TS0/TS1/TS2 critical policy to 100.
BUG=b:294479707
TEST=Build and verify DPTF value by thermal team on Boxy system
Change-Id: Ic34e44f218ff980c54bf93841880fab5e21b3fca
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77108
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of open coding this, use the mmio_range helper function to tell
the resource allocator about the northbridge's IOAPIC's MMIO. This
change sets the IORESOURCE_RESERVE and IORESOURCE_STORED bits in the
resource flags that weren't set before, but mmio_range is already used
elsewhere for similar purposes.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id66a73cdb22fd551e4359914ba5513313dcc3193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Disable NULL breakpoints in setup_realmode_idt before calling
write_idt_stub in a loop.
TEST=No more spurious Null dereference errors in the console output.
Before Mandolin showed these two errors before running the VBIOS:
[ERROR] Null dereference at eip: 0x4e6f1a35
[ERROR] Null dereference at eip: 0x4e6f1a4f
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2255d85030e41192ae8a3a7f0f6576c0d373eead
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Instead of open coding the same functionality, use fixed_io_range_flags
to tell the resource allocator about the FCH subtractively decoding the
first 0x1000 bytes of I/O space. Also update the comment to match the
code.
TEST=On Mandolin the flags of this resource stay the same (0xc0040100).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia30a87a4e37c98248568476b74af2730a3c0e88d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77170
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The resource allocator's setup_resource_ranges will make sure that the
memory resources are 4KiB-aligned. The resource allocator doesn't
enforce any alignment requirements on IO regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c148ce2acbe284b40126e331d8f372839817e73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77167
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use get_iohc_fabric_id() to translate the coreboot domain's number into
the destination data fabric ID of the PCI root. This allows using the
coreboot domain 0 as primary domain of the SoC in all cases, so it's
still possible to use config_of_soc(). This allows dropping the
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN_MULTI_PCI_ROOT Kconfig option
and do the check if the destination fabric ID in the PCI bus number,
MMIO, and IO decode registers is the correct one for the domain without
the need to use a non-zero number for the primary PCI root domain.
TEST=Mandolin still boots and the PCI bus, IO and MMIO resources still
get reported correctly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I880ee0bf5c185cfe4af7de0d39581eb951ee603a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77169
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement get_iohc_fabric_id for each SoC that translates the coreboot
domain number to the fabric ID of the corresponding PCI root. This
allows the primary domain to have the number 0 even though the
destination data fabric ID will be non-zero. Keeping the primary domain
number 0 allows to use config_of_soc() which can be resolved at link
time and not need to dynamically find the SoC device to get the config.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6538a777619eed974b449fc70d3fe3084ba447dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the commonlib, console, northbridge, security, and
southbridge directories that don't already have an SPDX license line
at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I02804a10d0b0355e41271a035613d9f3dfb122f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Rewrite them to more accurately describe what they are about.
Change-Id: Icb0ac1e592b662bbb81da431ff97af1a00f952c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
In the case of SoCs hat have more than one PCI root, we need to check to
which PCI root the PCI bus number, IO and MMIO regions configured in the
data fabric registers get routed to and only tell the resource allocator
about the resources that get routed to the current PCI root domain. For
this the numbers of the domains need to match the PCI root's destination
data fabric ID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib6a6412f733d321044678d2b064c33418a53861c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Intel Platform Service Record (PSR) provides on-platform persistent and
tamper resistant ledgers and counters.
Key events captured within the Intel PSR Event Ledger, e.g., Chassis
Intrusion Detection, can be observed over the life cycle of the platform
to help assess confidence.
Counters for platform S0 operational use and power state transitions can
be assessed to aid in the determination of general wear or correlations
of other platform events when determining platform decommission plans
(repurpose, resell, recycle).
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost.
CSE Lite SKU firmware supports a command to backup PSR data before
initiating a firmware downgrade. Add a config to support this PSR data
backup flow.
BRANCH=None
BUG=b:273207144
Change-Id: Iad1ce2906177081c103ef4d4bcef78fa2c95026f
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
With this change TPERST_HIGH could met spec.
Before
160ms
After
460ms(met spec min=400ms)
BUG=b:295277868
TEST=emerge coreboot
EE measured power sequence met spec
boot to system and check wifi connection is fine
Change-Id: Ifb909a55b36f2366132c3e20021c4bde4bc87a05
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Allows cbmem console log and timestamps to be read from Windows.
TEST=build/boot Win11 on google/eve, read cbmem log
Change-Id: I545ce43d4337dd71afedda6bc9208a8c3bf158ee
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77139
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The data fabric also controls which PCI bus numbers get decoded to the
PCI root. In order for the resource allocator to know how the hardware
is configured, read the corresponding data fabric registers to get the
information that then gets passed to the allocator.
Picasso, Cezanne, Mendocino and Rembrandt only support one PCI segment
with 256 buses while the Phoenix and Glinda data fabric hardware has
support for more PCI segments. Due to this change, the register layout
is different and incompatible between those two, so introduce the
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT Kconfig option for a
SoC to specify which implementation is needed. At the moment, coreboot
doesn't have support for multiple PCI segments and the code doesn't
support PCI segments other than segment 0.
On Picasso the PCI bus number limit read back from the data fabric
register is 255 even though CONFIG_ECAM_MMCONF_BUS_NUMBER is set to 64,
so also make sure that the bus and limit returned by
data_fabric_get_pci_bus_numbers is within the expected limits.
TEST=PCI bus allocation still works on Mandolin (Picasso) and Birman
(Phoenix). Picasso has 64 PCI buses. coreboot puts this info into the
resource producer in _SB\PCI0\_CRS which the Linux kernel reads:
* coreboot: PCI0 _CRS: adding busses [0-3f]
* Linux: pci_bus 0000:00: root bus resource [bus 00-3f]
This matches the information in the ACPI MCFG table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide5fa9b3e95cfd59232048910cc8feacb6dbdb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77080
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The fixed I/O resource descriptor macro implies that the device will
only decode 10 of the 16 IO port bits causing aliasing. Use an I/O port
descriptor instead and use Decode16 to tell the OS that this I/O
resource will decode all I/O address bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2df260cea6f12f5a3a6cbae3c7b99bab244a556b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The fixed I/O resource descriptor macro implies that the device will
only decode 10 of the 16 IO port bits causing aliasing. Use an I/O port
descriptor instead and use Decode16 to tell the OS that this I/O
resource will decode all I/O address bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6183d625fb7968fb33caf396f19feef8917ba4fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The SOC_AMD_REMBRANDT_BASE comment at the end of Glinda's Kconfig is
probably a leftover from the Mendocino/Rembrandt SoC this file was
copied from. Change it to SOC_AMD_GLINDA to match the corresponding
'if SOC_AMD_GLINDA' in the file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85132e4840c1bc713cfc2f3493f800d66edd10ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 22.04
* Manjaro 22
No known issues.
https://starlabs.systems/pages/starbook-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7c92bf92ab4de546c3633fae7e19a302409508ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Neither Windows nor mainline Linux make use of IOSF on the Braswell
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/edgar
Change-Id: Ic51624ffd816d48c007c13d510601cf8cbf1edc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Neither Windows nor mainline Linux make use of IOSF on the Baytrail
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/swanky
Change-Id: I249028c57cc704955cf5a11e2088780ef58e16cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77141
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Neither Windows nor mainline Linux make use of DPTF on the Baytrail
platform, so guard its inclusion with CONFIG(CHROMEOS) to prevent an
unknown device being listed in Windows device manager.
TEST=build/boot Win11, Linux 6.2 on google/swanky
Change-Id: Ifc4d349691b647fe2d70c92bd20d1b1128b1e10a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77140
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
VBOOT_CBFS_INTEGRATION needs board_reset in its logic. Otherwise, it
will cause a build failure.
BUG=b:294643742
TEST=build coreboot
Change-Id: Ia4b81d8add71e62707f6b5a747d270caba502174
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77118
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
After enabling VBOOT_CBFS_INTEGRATION, bootblock exceeds allocated size
(60K) by 3.5K. Since TPM and EC won't be accessed in bootblock, we move
I2C and SPI initializaion to verstage to reduce bootblock size. The GSC
interrupt pin configuration is also moved to verstage to save more
spaces for bootblock.
The size of bootblock.raw.bin is reduced from 64,040 bytes to 60,808
bytes.
BUG=b:294643742
TEST=boot to kernel
Change-Id: I5f6855d5a1a0fce6e739d44652c88e406f6f7b89
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Set the ACPI device status to hidden, since no driver is necessary or
available under Windows.
Linux is unaffected as it does not use the ACPI device status.
TEST=build/boot Win11 on google/akemi
Change-Id: Ib1e274084400fa47e483267d331e632ceb5be757
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75178
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If the variable `mirror_flag_attempts` isn't accessible, or doesn't
have a value, don't attempt to mirror the EC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia39b2ce4ffcb8db3a335449c8bdb0d5c8a28a52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The EC should be mirrored (if it's out of date) unconditionally if
the board support Thunderbolt. Use DRIVERS_INTEL_USB4_RETIMER instead
of SOC_INTEL_COMMON_BLOCK_TCSS as it's more suitable.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I27b238d4d404746c9a70bacf8e60d9e0b0e1ccca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76579
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This variant was inadvertently missed when upstreaming other rambi
variants, so add it here for completeness. Add ACPI for the light
sensor to common code to match all other i2c devices.
Sourced from downstream Google branch firmware-expresso-5216.223.B,
commit 6f4073c0e8c8 ("baytrail: implement baytrail technical advisory
556192").
Change-Id: Ia507f95f6af85344e1ab8452f7b3c2cc61526699
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Set the maximum subordinate bus number of the domain to the last PCI bus
number that is decoded to this PCI root. This makes sure that the
resource allocator knows the maximum number of PCI buses on this PCI
root to not assign bus numbers to buses below this PCI root that aren't
routed to that PCI root.
Now that we have this info in the link list structure or the domain
device, we can pass the max_subordinate field to the
acpigen_resource_producer_bus_number call and can leave the subordinate
number after pci_domain_scan_bus is done unchanged instead of setting it
to the limit.
TEST=On Mandolin both the bus resource producer in _SB\PCI0\_CRS and the
PCI bus number allocation remain unchanged.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2ee75b2a7054a306b0c7d98c5357391c029187bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77112
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the ability to show a pre-boot splash screen on
Meteor Lake systems using FSP-S.
The patch calls into `fsp_convert_bmp_to_gop_blt()` when the
`BMP_LOGO` config is enabled. This function converts a BMP
file to a BLT buffer, which is then used by FSP-S to render the splash
screen.
Additionally, increase the heap size (malloc'able size) upto 512KB
(when BMP_LOGO config is enabled) to accommodate high
resolution logo file.
BUG=b:284799726
TEST=Able to see pre-boot splash screen while booting google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3608bfacc21574e12cde0e2012a16e6388ce54df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch adds an API to convert BMP images into GOP BLT buffers for
Intel FSP-S. This is required to display the OEM splash screen at
pre-boot phase.
Previously, Intel FSP-S had provision to consume the *.BMP file as is.
However, starting with the Alder Lake platform, Intel FSP has dropped
this conversion logic and expects the boot firmware to pass the BLT
buffer directly.
This patch implements the conversion logic in coreboot.
BUG=b:284799726
TEST=Able to build and boot google/rex
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I992b45d65374f09498ff0cab497f7091e1e7a350
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch adds BMP image header and BLT header macros in
`efi_datatype.h` to implement a converter inside coreboot FSP 2.0
driver that converts any input *.BMP image into the BLT buffer.
The output BLT buffer is used by FSP-S to render any pre-boot display.
Added `Bmp.h` and `GraphicsOutput.h` files for `UDK base >= 2017`,
as these files were added with the UDK version 2017.
Note: BLT in UEFI BMP implementation stands for `Bit-block transfer`.
It is a method of copying graphis data (specifically images and fonts)
from one location to another (framebuffer), where the data is stored
in blocks of bits.
BUG=b:284799726
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e282d135007d288aadb5996a662524f76428874
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I7a775838358e7abe3f03d0ae65fb619c15dbad6f
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76875
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel requires that all enabled PCIe PCH ports have a CLK_REQ signal
connected. The CLK_REQ is used to wake the silicon when link entered
L1 link-state. L1 link-state is also entered on PCI-PM D3, even with
ASPM L1 disabled. When no CLK_REQ signal is used, for example when
it's using a free running clock the silicon will never wake from L1
link state. This will trigger a MCE.
Starting with FSP MR4 the UPD 'PchPcieClockGating' allows to work
around this issue by disabling ClockGating. Disabling ClockGating
should be avoided as the silicon draws more power when it is idle.
TEST: Verified on two boards, one with missing CLK_REQ on a PCH
root port, that the code does the right decision to disable
UPD PchPcieClockGating and PchPciePowerGating when necessary.
Change-Id: I673bbdbadc9afbed6a7bd5ce9f35dc70716d875b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It makes no sense to expose these symbols to the user in the menu.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6eb78d12afdc0828bf5e2d305f033d2f0cf4622a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Rembrandt has different data fabric component IDs compared to Mendocino.
PPR #56558 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c840a3e071a289d9e02143ee790c26faeda029d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Split the signed AMDFW binaries into their own section and enable PSP
verstage.
BUG=b:284984667
TEST=Build Myst BIOS image with PSP Verstage. Boot to OS successfully
with PSP verstage and a separate section for signed AMDFW binaries.
Change-Id: Ie0a54c157ebdebf9a0c95933c96865e0782a0f90
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
With reference to the Picasso PPR 55570 Rev 3.18, LegacyIoEn bit is 0 on
reset and setting it will enable the decoding of the following legacy IO
ports:
0x20, 0x21, 0xA0, 0xA1 (PIC);
0x40, 0x41, 0x42, 0x43, 0x61 (8254 timer);
0x70, 0x71, 0x72, 0x73 (RTC);
0x92.
Verstage does not use those legacy IO ports. Also newer SoCs like
Phoenix do not support Legacy I/O registers to access Power Management
registers and accessing them from PSP verstage causes a hang. Hence
enable legacy IO only on platforms that support it.
BUG=b::284984667
TEST=Build Myst BIOS image with PSP Verstage. Boot to OS successfully
with PSP verstage.
Change-Id: I5e74b4cd1fa7e942770976e5e2197ded47503660
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76692
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I20fe63e93121b3b791e6d475e948b6ada648293b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77073
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Neither cap, hcdn_reg, disable_relaxed_ordering nor ht_link_up are used,
so drop the fields from struct bus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I655b028107da7ddcb5caa03dab55b022387e7cb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77072
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add the required files to support VBOOT for when it is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I842b79d8e144414ce42b3d0d9dfd2b5180ecf70d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74230
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the Type-C output ports to "Integrated Displayport" to comply
with FSP 4221.
Change-Id: Ifcb4a086106f90c70926f44a7566330efd185544
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Disable PSR in the VBT to avoid flickering on kernels later than 5.15.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3640fcea73e278e6c8968a4b0c9ba7cf04a2361f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Disable PSR in the VBT to avoid flickering on kernels later than 5.15.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5b58f4d26fa0032a5aed3af0db71a5daf41fdd8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76941
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable "CnviBtCore" and "CnviBtAudioOffload" to increase
bluetooth performance.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibafabfaa39ba46620a2e06b288c457267f041ab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
If the version of the EC firmware in coreboot doesn't match
the firmware that the EC is running, print the versions.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I55c09b8d5ffe8ca9135384c823d005b55cfd83d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76380
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch the TGL variant to use the "merlin" EC variant, and delete the
no longer needed "TGL" EC variant.
This is not a functional change.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id4d305490b48c1c79ea52b0bbaa79b675412e0b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76332
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch the ADL variant to use the "merlin" EC variant, and delete the
no longer needed "ADL" EC variant.
This is not a functional change.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I61e56cc95a26be60d7f10c89d26bce2d857ae81a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The UCSI mailbox isn't used, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I03587a2322b1f34fa26a5c2ba7906a4e1ae82ae0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Merlin was the name for the open-source variant of the EC. It
ended up getting entirely rewritten to work with SDCC, and is
currently being used on starbook/adl. The source code isn't
available at the time of this commit due to some old ITE XLT
code being used.
Add the latest version of the code, replacing the old code, so
the boards can be migrated over.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib8384fc9322058297e8219ac8e483ac37a70bd33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Recent ChromeOS devices use Ti50 instead of Cr50. Therefore, some
strings or comments are not accurate anymore. When applicable, rename
Cr50 to GSC (Google security chip).
BUG=b:275544927
TEST=./util/abuild/abuild -x -t GOOGLE_TOMATO -a
BRANCH=none
Cq-Depend: chromium:4756700
Change-Id: Ie5b9267191a5588830ed99a8382ba1a01933028f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Width of registers are always dwords on pl011, not bytes.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I955319d31bba5c0cd4d50f2b34111d51fea653ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The use of a separate _PRW is not necessary when the _CRS interrupt
already has the Wake flag set (as these all do). Additionally, Windows
does not allow the use of a gpioint for the _PRW source, which results
in an ACPI_BIOS_ERROR BSOD.
Since ChromeOS builds for CYAN devices use an older kernel and may not
make use of _CRS interrupt Wake flag, keep the _PRW around when
CONFIG_CHROMEOS is selected.
TEST=build/boot Win11 on google/{cyan,edgar}
Change-Id: I7d0883e4de9572a14c8bad0ac086370bd00eeb1a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76798
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Specify the size of the ME region so that it matches the IFD.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I51ba0a7646ab72d4dd22b99519708649c78b25b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This patch creates a new variant karis4es.
The new variant will support only ESx samples. The existing karis
variant will support the QS samples.
BUG=b:293326312
TEST=Image built properly
Change-Id: I854fee7206528a235f027ff8ec98593a02be4806
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76761
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Add configs for USB 3.1 Gen2 electrical validation (EV) settings
so that people can set the EV settings per board in device tree.
BUG=b:285811345
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to taranza and checked the log.
All usb configs were set correctly.
Change-Id: Iecd12d3db76b63ad99887dee5991d94d47f138fd
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76246
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This is unused - other references were removed long ago.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia7a65f54c736db20a5440795fdfaa8be31ef971f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
´config´ is removed from measure list (CB:74750)
Add 'config' to ram_stage_additional_list[] to have it measured and
verified.
BUG=NA
TEST=boot and verify coreboot logs on facebook FBG1701
Change-Id: Id4119bc3a01e11f14a091facf81964d1a71092c1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie54fd6c5a82f368018d0b5fb811a6c9220c2c70b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77079
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0fe478a710ecc1f2c8b36347aaf2d1634ebba9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77078
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PPRs #57243 Rev 3.02 and #56558 Rev 3.04 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibabe8faa79e3dcd02f4c885d29b9634645947b98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77077
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfac7d996c6de9ea7c6adf2760de0ad97ffb9ec0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
PPR #55570 Rev 3.18 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide492f4479b85cd885044bbf74d8bf18c12e552b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
device/device.h provides struct device.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie03f6d15d94f2858e293b9f57505034263c03bbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77074
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Prior to commit d1c0f958d1 ("acpi: Call acpi_fill_ssdt() only for
enabled devices"), uart_inject_ssdt() was used to set the ACPI status
(_STA) for both enabled and disabled devices. The aforementioned commit
limited it to being called only on enabled devices, which left disabled
devices without any _STA method at all -- which the OS assumes means
that the device is present and enabled.
To fix this, create the _STA method in the UART asl code for each port,
and set the return value to a name variable (STAT) which defaults to
0 (not present/disabled). Then, have uart_inject_ssdt() set STAT to
present and enabled (0xF) for UARTs actually present on the board.
TEST=build/boot google/skyrim (frostflow), dump ACPI tables, and verify
that _STA returns 0xF only for UARTs enabled in devicetree.
Change-Id: Id89e74c3ea7f53280935898ee35311b7cf3b152a
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kahlee selects AMD_SOC_CONSOLE_UART causing UART0 to be used as console,
so enable uart_0 in the devicetree to make sure that the UART will be
marked as enabled in the SSDT that will be generated with the next patch
applied. This also matches the other AMD SoC based Chromebooks.
Change-Id: Ibe18f87d8bf63603fb2eb87728395e45e9a9ef69
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77094
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the UARTs as MMIO devices in the chipset devicetrees. Drop ACPI
_STA in asl since now handled by common SSDT generator. Implement
wait_for_aoac_enabled() since required by SoC common code, and ensure
compiled during all stages necessary.
TEST=build/boot google/liara, verify console UART still functional.
Change-Id: Ibecafdfa189d9c63a29b63759c5b965d03719009
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 5dfec71829.
Reason for revert: This change made it impossible to disable ASPM by
FSP parameter. ASPM_DISABLE would result in the FSP parameter not
being programmed, causing it to be the FSP default value instead.
This additionally fixes MTL to match ADL.
Change-Id: I60c0ea08513fcb0035449ea3fef1681de528c545
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75280
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: I56ee0d4a26931fe05d2d35046325901930086e35
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76344
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TESTED=On Intel AC, after seleting DISPLAY_UPD_IIO_DATA to compare
IIO UPD data are expected. lspci -vvv result is also normal.
Change-Id: Icfc2a22cb2e1f95be6bfc1d712e620e19a23ce27
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
To deduplicate mainboard mainboard_config_iio since there are a few
SPR-SP mainboards now.
The flow would be soc function initialize_iio_upd initializes the table
with the default values which are mostly zero, then mainboard can
overwrite it by soc_config_iio.
Change-Id: I72d74241fcad4c85a95f6d14587418f544caadd9
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76185
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Generate RAM ID for CXMT CXDB4ABAM-ML
DRAM Part Name ID to assign
CXDB4ABAM-ML 1 (0001)
BUG=b:290154780
BRANCH=dedede
TEST=FW_NAME=boxy emerge-dedede coreboot chromeos-bootimage
Change-Id: Ide44acf6bb8e5d5023c76d9e5e48ef113f7c6ec6
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76825
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This has two noticeable effects:
1. Devices populate the list much quicker while scanning.
2. Devices do not disappear and reappear from the list while scanning.
Tested on system76/lemp10.
Change-Id: I598c53805785914b4e9ae7f620e724eadbe643d4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Daniel Sutton <daniel@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77047
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
NVM has 8KB to store camera module related settings and
parameters. According to NVM hardware spec, the NVM size should be
0x400 and the width size should be 0x08.
Re-set the right NVM format and ensure camera related configs can
get the correct module information.
BUG=b:294155898
TEST=none
Change-Id: I58932bc0f3dd935aa0ea8e68b2a4b0ae4907b316
Signed-off-by: Serin Yeh <serin.yeh@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76893
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
TEST=build/boot Windows/linux on redrix?, verify touchscreen functional
in OS, dump ACPI and verify only i2c devices actually present on the
board have entries in the SSDT.
Change-Id: I0273014b2d164f67f503da7b968a09256bffb43c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74929
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For brya variants with a touchscreen, drive the enable GPIO high
starting in romstage while holding in reset, then disable the reset
GPIO in ramstage (done in the baseboard). This will allow coreboot
to detect the presence of i2c touchscreens during ACPI SSDT generation
(implemented in a subsequent commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I8e56ac4834ce69de18bef2d34f5c361a7fda1aab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
TEST=APU2 still boots and doesn't show any new errors in dmesg.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia9f0eb3df8fd2dfe395f616da981cc3a0cd3b29d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Before add_io_regions only reported one fixed IO range to the resource
allocator that covered the whole IO range from 0x0000 to 0xffff. Instead
read the data fabric IO space decode base and limit address register
pairs to get the actual IO port decoding from the data fabric registers.
This will also help with adding support for multiple PCI root domains to
the common data fabric domain code so that Genoa can use it. In that
case each PCI root domain will only decode a part of the whole IO port
range.
Beware that the data fabric IO base and limit fields can contain values
that correspond to IO port addresses far outside of the addressable IO
port range. In case of Picasso, the IO limit read from the only enabled
DF IO range register would be 0x1ffffff after converting the raw data to
an IO port address. To not give the resource allocator wrong constraints
make sure that the IO limit we report will be at maximum 0xffff.
TEST=On Mandolin (Picasso) and Birman (Phoenix) the full range of IO
port addresses still gets reported as a domain IO resource producer like
before the patch:
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I087d96f7bdaae0d7b53089f6abaf0500a4b064e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia58e26caa1ba910b41911991b176a1ac8c4e0065
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I769dc317115981391cf0f4e0b743c600407a6eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76958
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PPRs #57243 Rev 3.02 and #56558 Rev 3.04 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic68e73e28362abc5d812839b40282114c7ba25ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifcae9c9ad664d50100cd40692fd9631845f76671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPR #55570 Rev 3.18 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I61d4fca48d71010bbc4bd94a2fb8889bad08f1cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Rename add_io_regions to add_data_fabric_io_regions to be consistent
with add_data_fabric_mmio_regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia990cc14dd6dc162ad614a6e9e0b36426cb04670
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
As a preparation to read the IO decode ranges from the data fabric
registers instead of having it hard-coded, factor out the
report_data_fabric_io function to report one IO producer region from
add_io_regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c3f8cd6749623f1a4bad14873d53b8a52be737
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76933
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename the fabric_id struct field in the df_mmio_control union to
dst_fabric_id to both better match the register definitions and also be
a bit clearer about what this is doing. Also use tabs for indentation in
the struct inside the df_mmio_control union.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0a17d82a5d7b66a8f84854f21fbbb319da81ac43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Order the data fabric register definitions by function number and
register offset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia3066ad0f564520cb322a3e41a413eb3bf51260d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a26402b8078d288a7e32c1668591d001fa3ede9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76889
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia0355838ac1d513ba562fd6fb4672342dd383498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76888
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Instead of open coding the broadcast data fabric PCI register access in
the functions for indirect non-broadcast data fabric register access,
just use the existing data_fabric_broadcast_[read,write]32 functions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I174c1e6ee4856d97c5ec6d07bb8c217d6df9425f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
To have both the PCI function number and the register offset into the
config space of that function of the data fabric device in the data
fabric register definitions, introduce and use the DF_REG_ID, DF_REG_FN
and DF_REG_REG macros. The DF_REG_ID macro is used for register
definitions where both the function number and the register offset are
specified, and the DF_REG_FN and DF_REG_REG macros are used to extract
the function number and the register offset from the register defines.
This will allow having one define for accessing an indexed group of
registers that are on different functions of the data fabric device.
TEST=MMIO resources read from the data fabric's MMIO decode registers
don't change on Mandolin and the ACPI CRAT table is also identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63a284b26081c170a217b082b100c482f6158e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76886
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Debug messages shown during IDE initialization are streamlined as
follows:
"Primary IDE interface" (and similar) are shortened to
"Primary interface".
We don't need to see "IDE" twice as messages are already prefixed.
Refactor "IDE: (Primary) IDE interface: (on)" into
"IDE: (Primary interface): (on)" to allow compiler to deduplicate
component strings, also used later in messages re UDMA/33.
This reduces uncompressed string size by 32 bytes and allows ramstage
to compress a wee bit better.
Change-Id: I16f5c2b3775c5a73b83d83817d7075e944089a12
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73331
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since it was the only super I/O in the serverengines folder, also drop
the parent folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I610c94bc100c9d5558da442b2847d8f26de07820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77064
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix ethernet MAC address configuration. Currently, coreboot would
use ethernet_mac0 for both ports when setting the system's MAC
address. Instead, set the right device_index for the second controller
to pick up ethernet_mac1.
BUG=b:294856127
TEST=boot device and observe two different MAC addresses on the ethernet
ports.
Change-Id: I5ff6d62d2f837a120f7095f9b9aed487e6c5aee4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77044
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the RPL CPU power limits and system power limits based on
the suggestion of the thermal team for RPL SKUs.
The PL4 value suggested by the thermal team which is different from the reference document 686872.
BUG=b:292471206
BRANCH=firmware-brya-14505.B
TEST=built and booted into OS.
Change-Id: Ia030d13ca276c5e8340ae3b20d6e169bb162751d
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76769
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Without setting these GPIO bits, you /can/ power on your board after
powering it down again. This includes after cutting the power.
The only way to recover from this is to pull the CMOS battery and cut
the power for 15mins. Then make sure you don't do this GPIO trickery or
you end up with the same state of basically an unresponsive "dead"
mainboard. So flash the chip before you pull the battery.
One small workaround I found when you like to flash from the system, is
to press the power button with 1 second after you enable power to the
board. In this small timeframe, apparently the superio chip didn't
intialise/restore/gets set with the settings that make it never want to
power on again. The other workaround is to connect the appriopriate
pins on the ATX power connector to force power to the mainboard.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I4c9df200ba3ec5f315ad3d184588551d29fa68ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I19c029968584fedbb6749e66c7ea2f74a7d580f4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Copy jack detect GPIO config of NAMI variant, which uses the same
codec for the external jack/mic. The internal pull-up isn't needed,
and fixes issue of high CPU usage under Windows.
TEST=build/boot google/rammus, verify jack detect functional under
both Win11 and Linux 6.x, no high CPU usage from excessive interrupts.
Change-Id: Ifbe23a6b33343e54b43879a8971c7cb6475cf1f0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76947
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Once platform code has filled in the (legacy) ACPI PM register
map, added function will fill in the extended entries in FADT.
TEST=samsung/lumpy and amd/mandolin FADT stays unchanged.
Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The first platform samples came with IT8786E. The production units
switched to IT8784E in the final design.
Change the code to use IT8784E and reflect the proprietary firmware
configuration of the SIO chip.
TEST=Boot Ubuntu 22.04 on Protectli VP4670 (vault_cml) and dump the
configuration with superiotool and compare the configuration with
proprietary firmware.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5dc6669b592484e445c8c4bbe95d73f0a9f0392e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74175
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
IT8784E is basically a IT8786E stripped from serial ports 3-6.
The patch creates a chip directory for IT8784E used by
protectli/vault_cml platforms.
TEST=Boot Ubuntu 22.04 on Protectli VP4670 (vault_cml) and dump the
configuration with superiotool and compare the configuration with
proprietary firmware.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibe01358611f3ce3f155ddb01a7d177a3ff75765e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Add ramstage.c in Makefile.inc and update boxy power limits in
Boxy ramstage.c.
BUG=b:290293153
TEST=emerge-dedede coreboot and check psys and PLx value on boxy
Change-Id: I4257dab358f066ebd13b6f251e8a5258a72fbd39
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76877
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use ARM architectual timer by initializing frequency to 13 MHz. Since
system timer is the source of the architectual timer, we also call
`timer_prepare` in `init_timer`.
BUG=b:229800119
TEST=run `suite:faft_bios` to verify the firmware stability.
check timestamps by cbmem.
Cq-Depend: chromium:4747539
Change-Id: I8b1348044e4c92984510604b7f61611e13284d86
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76919
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All boards based on brya will have GFX devices to represent DRM
connectors in the kernel's /sys/class/drm/.
There should be no functional impact with or without this patch.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I11afa9e8a1c8bf9f57bf6d195f07531182bd36f1
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the device and soc directories that don't already have an
SPDX license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I89c05c7c1c39424de2e3547c10661c7e3f58b8f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the mainboard directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the drivers directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8442bc18ce228eca88a084660be84bcd1c5de928
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68980
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the cpu directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3033f2a9eebc75220f7666325857b3ddd60c8f75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68979
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Select ENABLE_TCSS_USB_DETECTION for non-ChromeOS builds, to enable
booting from TCSS USB-C ports.
TEST=build/boot google/banshee, verify able to boot from all USB ports
using edk2 payload.
Change-Id: I998cc4a40950f43b4c511ead93ccc02c56c8367c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76945
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select ENABLE_TCSS_USB_DETECTION for non-ChromeOS builds, to enable
booting from TCSS USB-C ports.
TEST=build/boot google/drobit, verify able to boot from USB ports using
edk2 payload.
Change-Id: Ic6ab84dd5d1b980296eac043917d2cc7f14a5536
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Inspect all type-C USB ports, check if there is a USB device attached,
and if so, send the connection request to the PMC. This allows for any
attached USB2/USB3 devices to be used for booting by the payload.
Since this functionality is only needed by ChromeOS devices with TCSS
running upstream coreboot, introduce a new Kconfig to guard its use.
Boards needing it will select it in subsequent commits.
TEST=tested with rest of patch train
Change-Id: I69522dbcc8cae6bbf41659ae653107d0e031c812
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72909
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Variable 'i' is unsigned, so use %zu vs %zd.
Change-Id: I5f5b28796b30285e81a94c37e686a9e763cab204
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76943
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Similarly to te_relocate(), on success pe_relocate() should return 0.
It has never been an issue so far as pe_relocate() return value is not
tested.
Change-Id: I8e531662952d12e1f0ffa34042dab778ea602bfc
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76891
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Report CPU C10 state over eSPI so that the EC can use Virtual Wires to
detect if PECI can be used.
Change-Id: I301361f35caee8ba1c3fd9227219603897add92b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76910
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When lemp9 was converted to a variant in CB:64528, the Makefile was not
updated to handle the variant-specific `romstage.c`. This, as would be
expected, caused memory init errors and broke boot on CML-U boards.
Tested lemp9 boots to payload again.
Fixes: 5b7b04c938 ("mb/system76/cml-u: Convert lemp9 to a variant")
Change-Id: Ibc11d69a1662df653e6553421d67a9cd1b1d03e2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
BUG=b:279097356
TEST=On dibbi:
- flash OS 15449.0.0 (where suspend is broken due to b:274531972)
- run `suspend_stress_test --count=1 --suspend_max=30 --suspend_min=28`
- check the AP wakes up immediately when the EC detects a sleep hang
Change-Id: I24a2aa5de1f76e6dd1c1ce726b648583756e5e55
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76938
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add PLx from JSL PDG(ID: 613095) in boxy devicetree.
BUG=b:290293153
TEST=emerge-dedede coreboot and read correct value on boxy CPU log:
CPU TDP = 6 Watts, CPU PL4 = 60 Watts
Change-Id: I7b063dc235fb714ba47eb620b914f2f9e92a2715
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76876
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
_DSD "StorageD3Enable" property is needs to be set under the root
port in the DSDT or SSDT. The ACPI _DSD method is the preferred way
to opt D3hot support for storage devices.
This also bypasses the low LTR from SSD that blocking S0i2.2
LTR/latency SoC requirement.
Name (_DSD, Package () {
ToUUID("5025030F-842F-4AB4-A561-99A5189762D0"),
Package () {
Package (2) {"StorageD3Enable", 1},
// 1 - Enable; 0 - Disable
}
}
)
BUG=b:289028958
TEST=Check code compiles & boot rex, and verify the "StorageD3Enable"
SSDT entry.
Change-Id: I19decc2706954e73bc28fc2d9c3c4d18d2c384b7
Signed-off-by: Kangheui Won <khwon@chromium.org>
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76835
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch configures external V1p05/Vnn/VnnSx rails for Craaskov
to follow best practices for power savings – untested though.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
BUG=b:290165011
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ibaf6a285788e26688d3d42691ab40052ef6d6cdb
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76926
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DPTF parameters were verified by the thermal team.
Based on thermal table in 290705146#comment11.
Set "tcc_offset" = "8"
BUG=b:290705146
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I2d9e1ad2e2fa98757d76578956101a482073885e
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76712
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
To be consistent with other boards setting the keyboard backlight at
boot.
Change-Id: I40d8ebe468a967f0dfe1e82bff9c63f1986699c7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This feature was originally present and then dropped, but turns out
that users prefer it. Set the backlight to 50% in romstage, back to
zero in ramstage; skip enabling on the S3 resume path.
TEST=build/boot google/eve, verify keyboard backlight turns on/off
as expected.
Change-Id: I33af888d614010538f69512bbd052ed2b83fcaa5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move the jack detect GpioInt resources under the codec (where they
belong), but also leave a copy under LPEA for since the Linux drivers
(incorrectly) require them there. Add pin list for Windows' SST driver.
Adapted from the Intel ValleyView edk2 ACPI reference code.
TEST=build/boot Win11, Linux on google/swanky; verify audio functional
OOTB under Linux, under Windows with coolstar's drivers.
Change-Id: I51c07013fc20f07d2fd3639f7fbc2af0e0e490a0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76795
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
- add HRV and GpioIO for coolstar's windows drivers
- fix interrupt type for TI jack detect switch
TEST=build/boot Win11, Linux on google/cyan; verify audio working
OOTB under Linux, under Windows with coolstar's audio drivers.
Change-Id: I6bf6bb9e9989ca8f42436800666d95dd05799838
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76800
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Most of the components of this laptop are tested to work,
which is listed in the documentation.
Change-Id: Id8b3b7f735460c5e76a2dc9ab2d10154e6606ad6
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46630
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The JPEG decoder, that was added many years ago to display a boot-
splash in coreboot, has a few quirks. People used to do some voodoo
with GIMP to convert images to the right format, but we can also
achieve the same with ImageMagick's `convert`. The currently known
constraints are:
* The framebuffer's color format is ignored,
* only YCC 4:2:0 color sampling is supported, and
* width and height have to be a multiple of 16 pixels.
Beside that, we can only display the bootsplash if it completely
fits into the framebuffer. As the latter's size is often decided
at runtime, we can't do much more than offering an option to set
a specific size.
Change-Id: I564e0d89fb46503ff4c11e095726616700009968
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Include multiple hash tables into relevant CBFS.
BUG=b:277292697
TEST=Ensure that all multiple hash tables are part of Myst BIOS image
with PSP verstage enabled.
Change-Id: I1601f4a01db5b2bbf8b5636ef9e69e41c1d9a980
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76589
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On mainboards using Phoenix SoC with PSP verstage enabled, to
accommodate growing number of PSP binaries, multiple smaller hash tables
are introduced. Also some hash tables are in V2 format identifying the
concerned PSP binaries using UUID. Add SVC calls to support multiple
hash tables with different versions.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Ensure that
all the hash tables are injected successfully. Ensure that PSP validated
all the signed PSP binaries using the injected hash tables successfully.
Change-Id: I64e1b1af55cb95067403e89da4fb31bec704cd4f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76588
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently PSP verstage updates PSP bootloader with one unified hash
table containing hashes for all the signed PSP binaries to be validated.
With growing number of PSP binaries to validate and memory constraints
in PSP, there is a requirement to split and update the hash table into
multiple smaller chunks. Hence change the update_psp_fw_hash_table()
signature such that the hash tables are updated in a chipset specific
way.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Build the
Skyrim BIOS image and confirm that the hash table is identical before
and after this change.
Change-Id: I75aac5bc5e7f61069be25d801d0838fdf565d3d1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76587
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As of OS/FW: 15276.0.0 - Skyrim is not able to wake from S1/standby.
The wake issue either needs to be fixed, or S1 should not be advertised
as a capability in the ACPI table.
Select ACPI_S1_NOT_SUPPORTED to indicate that ACPI state S1 is not
supported on Skyrim devices. This results in 'standby' being removed
from /sys/power/state.
BUG=b:263981434
TEST=suspend_stress_test
TEST=frostflow-rev2 ~ # cat /sys/power/state
freeze mem
Change-Id: I85fcdca34187a8c275cf5a93beb931dfb27a7c87
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
C1-state auto demotion feature allows hardware to determine C1-state
as per platform policy. Since platform sets performance policy to
balanced from hardware, auto demotion can be disabled without
performance impact.
Also, disabling this feature results soc to enter PC2 and lower
state in camera preview case and save platform power.
Note: C1 demotion heuristics used EPB parameter to balance between power
and performance, i.e. low threshold when EPB is low in-order to get C1
demotion faster and vice-versa. ChromeOS operates at default EPB=0x7
(low EPB) in both AC/DC, so in DC mode it gets more C1 demotion hits
than expected (similar to AC mode) and losing power respectively.
BUG=b:286328295
TEST=Code compiles and correct value of c1-state auto demotion is
passed to FSP. Also verified PC residency improvement ~10% in
camera preview case.
Change-Id: I548e0e5340dec537d05718dd2f4652e10fb36ac0
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Since all indirect data fabric register accesses will be non-broadcast
accesses that target a specific data fabric instance, the
cfg_inst_acc_en bit in the DF_FICAA_BIOS register will always be set
since that makes the indirect access target only a specific data fabric
instance.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9aff01750c2c1e3506141b3ed293a980a64f8fac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
FSP has a parameter to enable/disable c1-state autodemotion feature.
Boards/Baseboard can choose to use this feature as per requirement.
This patch hooks up this parameter to devicetree.
BUG=b:286328295
TEST=Check code compiles & boot google/rex, and correct value has been
passed to FSP.
Change-Id: I2cc60bd297271fcb3000c0298af71208e3be60fc
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76826
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
USB DBC is very helpful for SoC debug. TraceHub needs to be enabled in
coreboot if debug consent == 2 or 4. Debug consent == 6 enables USB DBC without TraceHub enabled.
This patch updates the Kconfig help text to meet PlatformDebugOption in
MTL and changes debug consent to 6 in default to provide basic SoC
debug capability.
TEST=Boot to OS on screebo and DBC connection is OK.
Change-Id: Ic12528bdd8b1feda7f1b65045c863341f932d3a2
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76880
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit 9a7a677 from opensbi project moved the fu540 platform to generic
code and commit 26998f3 from opensbi removed the old non generic
platform. Therefore opensbi platform needs to change to generic.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I76aa3d386936b331785a23edb8deb0d73609be47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tablet motion control is a function of the EC, and under Windows, the
TBMC device needs to be initialized after CREC, or driver init will
fail. The only way to ensure this happens is for TBMC to be a child
device under CREC.
TEST=build/boot Win11, Linux on google/eve, verify tablet mode drivers
loaded and orientation switching functional under both OSes.
Change-Id: I5e9eab9ae277b5a04dc2666960a727e5680bf6f4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76792
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
cse_prep_for_rw_update() should return CB_ERR when
cse_data_clear_request fails. It was modified to CB_SUCCESS in this
commit ad6d3128f8 ("soc/intel/common: Use enum cb_err values")
BRANCH=None
BUG=None
TEST=Verify the system goes to recovery during downgrade when
cse_data_clear_request() fails.
Change-Id: Ibbccb827765afa54e5ab1b386fa46093b803977a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Enable config TME_KEY_REGENERATION_ON_WARM_BOOT for Intel Meteor
Lake SOCs. This config allows Intel FSP to programs TME engine to
generate a new key for each warm boot and exclude CBMEM region
from being encrypted by TME.
Bug=b:276120526
TEST= Boot up the system, generate kernel crash using following
commands:
$ echo 1 > /proc/sys/kernel/sysrq
$ echo "c" > /proc/sysrq-trigger
System performs warm boot automatically. Once it is booted,
execute following commands in linux console of the DUT and confirm
ramoops can be read.
$ cat /sys/fs/pstore/console-ramoops-0
S0ix also tested and found working.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I3161ab99b83fb7765646be31978942f271ba1f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Set UPD params GenerateNewTmeKey, TmeExcludeBase, and TmeExcludeSize
when TME_KEY_REGENERATION_ON_WARM_BOOT config is enabled. These UPDs
are programmed only when INTEL_TME is enabled.
Bug=b:276120526
TEST=Able to build REX platform.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Ib8d33f470977ce8db2fd137bab9c63e325b4a32d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75626
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Merge TME_KEY_REGENERATION_ON_WARM_BOOT and
TME_EXCLUDE_CBMEM_ENCRYPTION config options under new config option
named TME_KEY_REGENERATION_ON_WARM_BOOT.
Program Intel TME to generate a new key for each warm boot. TME always
generates a new key on each cold boot. With this option enabled TME
generates a new key even in warm boot. Without this option TME reuses
the key for warm boot.
If a new key is generated on warm boot, DRAM contents from previous
warm boot will not get decrypted. This creates issue in accessing
CBMEM region from previous warm boot. To mitigate the issue coreboot
also programs exclusion range. Intel TME does not encrypt physical
memory range set in exclusion range. Current coreboot implementation
programs TME to exclude CBMEM region. When this config option is
enabled, coreboot instructs Intel FSP to program TME to generate
a new key on every warm boot and also exclude CBMEM region from being
encrypted by TME.
BUG=b:276120526
TEST=Able to build rex.
Change-Id: I19d9504229adb1abff2ef394c4ca113c335099c2
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76879
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add more details to instruct future boards/models implementers regarding
how GFX devices should be added.
If HDMI and DP connectors are enumerated by the kernel in
/sys/class/drm/ then corresponding GFX device should be added to ACPI.
It is possible that some connectors do not have dedicated ports, but
still enumerated.
The order of GFX devices is DDIA -> DDIB -> TCPX.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I59e82ee954a7d502e419046c1c2d7a20ea8a9224
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76776
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Build issue introduced by patch CB:76418 (commit hash
01025d3ae7) for Google boards.
Patch has not been rebased to latest master and tested before
submission causing the Jenkins jobs to fail.
Change-Id: I95bd2485b98be4ab3a39eaaebb9efb34db93bbe8
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76915
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce new symbol SOC_INTEL_RAPTORLAKE_PCH_S that can be selected
by board with RPL-S PCH.
For now only the IoT variant of RPL-S FSP is available for use with
700 series chipsets. Boards with 600 series chipsets can still use
RPL CPUs with the ADL-S C.0.75.10, which contains minimal RPL-S CPU
support.
Change-Id: I303fac78dac1ed7ccc9d531a6c3c10262f7273ee
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Only the headers on Intel FSP repository have the CnviWifiCore
present. Options guarded for RPL like: DisableDynamicTccoldHandshake
or EnableFastVmode and IccLimit is also supported by all public FSPs
(except ADL-N for the handshake).
Options like LowerBasicMemTestSize and DisableSagvReorder have to be
guarded when FSP_USE_REPO is not selected, as publci FSPs do not have
these options.
Use FSP_USE_REPO instead of/in addition to SOC_INTEL_RAPTORLAKE
as dependency on the guarded UPDs to make them available for FSPs
that support them as well. Also prioritize the headers from FSP repo
over vendorcode headers if FSP_USE_REPO is selected.
Change-Id: Id5a2da463a74f4ac80dcb407a39fc45b0b6a10a8
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
If ACPI is above 4G it's not possible to have a valid RSDT pointer in
RSDP, therefore swap RSDT and XSDT. Both are always generated on x86.
On other architectures RSDT is often skipped, e.g. aarch64. On top of
that the OS looks at XSDT first. So unconditionally using XSDT and not
RSDT is fine.
This also deal with the ACPI pointer being above 4G. This currently
never happens with x86 platforms.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6588676186faa896b6076f871d7f8f633db21e70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This makes sure google/ovis don't get a random mac address on boot.
Additionally, program the LAN WAKE GPIO properly as per the Ovis
schematics dated July'23.
BUG=b:293905992
TEST=Verified on google/ovis that able to get the fixed MAC address across the power cycles.
Change-Id: I699e52e25f851de325f96ef885e04d15ca64badd
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76872
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
TESTED acpixtract -a is able to extract all the dumped tables including
FACS and DSDT.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7fad86ead3b43b6819a2da030a72322b7e259376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Arm needs very little of FADT. Just a HW reduced model bit and low power
idle bit set.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I197975f91cd47e418c8583cb0e7b7ea2330363b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76180
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for Samsung K4U6E3S4AB-MGCL.
BUG=b:293240969
TEST=emerge-dedede coreboot
Change-Id: I92a1f2110e74b5d25572e0e86e04b5b32112c1f5
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Configure GPIOs based on schematics and confirm with EE.
BUG=b:290248526
BRANCH=None
TEST=emerge-nissa coreboot
Change-Id: I17fc9333a0ef592ea36b196b3fd417be47fb82bb
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
It's not expected that non-x86 arch implement x86 style sleep states and
resume.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7a1f36616e7f6adb021625e62e0fdf81864c7ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76178
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select this Kconfig to ensure the PSP_ADD_MSR is properly programmed
across all cores.
This resolves a Windows BSOD "CRYPTO_LIBRARY_INTERNAL_ERROR."
BUG=b:293571109
BRANCH=skyrim
TEST=build/boot google/skyrim, use rdmsr to verify MSR value identical
across all cores.
Change-Id: I67391b49496d767912f5d81c1758a52a70fca6f6
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76809
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Ideed4b333632df5068b88dde6f89d3831e3046d1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
In the datasheet of ILI9882T [1] section 3.11 Power On/Off Sequence,
the TReset-CMD (Reset to First Command in Display Sleep In Mode) should
be larger than 10ms, but it's 1.1ms now. This may cause abnormal
display as some commands may be lost during power on. Fix this and
leave some margins by increasing TReset-CMD to 20ms. Also, to align
with the kernel driver structure starry_ili9882t_init_cmd, add 20ms
delay at the end of command.
[1] ILI9882T_Datasheet_20220428.pdf
BUG=b:293380212
TEST=Boot and display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ifdcaf0e34753fc906817c763f1c8e7389448d1dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76766
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iad9cbe16a2d1881d74edcc702be843168df8a4ff
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I16ac584781214350355e0625f8a2eca39a37cf85
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I81ae8acb0365af102e513b3d7cfa1a824636eb06
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76812
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3d5838b825c6ac2a2959388381004993024081c3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76813
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I2d65e9dbefc8fa5d8288151995a587f76049c65a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Id19193b960935eeffca8e8db60073321592368fe
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76836
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iab55c57ee5cac60911c9fe4cee8d86a252bde372
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76839
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3ab3538b276fee5ed135bb4e88d9ef2cd6a00bb9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76843
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I79e4b34fe682f5f21415cb93cf65394881173b34
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76842
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Ibd1e4bc96a2f5eea746328a09d123629c20b272c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The EFS_OFFSET is the relative address to flash base. We can not
assume the flash size is 16M.
The change will affect only Gardenia and Pademelon whose flash size
are 8M.
Change-Id: Ia68032db05264c55d333deec588ad9690a4ed2c1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76764
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. H54G56CYRBX247
2. H9HCNNNCPMMLXR-NEE
3. MT53E1G32D2NP-046 WT:B
4. K4UBE3D4AB-MGCL
5. K4UBE3D4AA-MGCR
BUG=b:290811418
BRANCH=dedede
TEST=FW_NAME=cret emerge-dedede coreboot chromeos-bootimage
Change-Id: Ib7f23dc3604fe1869772d92c9d7b8cc32ed9bbb9
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The PSP_ADDR_MSR is programmed into the BSP by FSP, but not always
propagated to the other cores/APs. Add a hook to run a function
which will read the MSR value from the BSP, and program it into the
APs, guarded by a Kconfig. SoCs which wish to utilize this feature
can select the Kconfig.
BUG=b:293571109
BRANCH=skyrim
TEST=tested with rest of patch train
Change-Id: I14af1a092965254979df404d8d7d9a28a15b44b8
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch chooses to show the early splash screen which is an
OEM feature. The current implementation is relying on the Intel
FSP GFX PEIM to perform the display initialization.
Having this feature allows the platform to show the user notification
with 500ms since boot compared to traditional scenarios where first
user notification is coming from kernel (typically ~3sec+ after cpu
reset). Eventually this feature will help to improve the user
experience while booting Intel SoC platform based chromeos devices.
BUG=b:284799726
TEST=Able to see the early splash screen on google/rex.
Change-Id: I399ddb6618e774302200e8a87629647ba070d080
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76361
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These devices are not present/used on CYAN boards.
Change-Id: I012b49562c2b932822823537032e2265901ddc81
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76799
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Set the ACPI status (_STA) for the PD device enabled+visible, to allow
coolstar's Windows drivers for USB4/Thunderbolt to attach.
TEST=build/boot Win11 on google/drobit, install USB4/TB drivers, verify
USB4/TB ports are functional for PD and data at USB4 speeds.
Change-Id: I84a20cfaf7e077469f8361b3da3b031d9fd84134
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Set the ACPI status (_STA) for the EC ACPI to enabled+visible, to allow
coolstar's Windows drivers for the EC and keyboard backlight to attach.
TEST=build/boot Win11 on google/samus, install EC/kblight drivers,
verify keyboard backlight control functional.
Change-Id: I3e9578f1ef18b3bebb93a9ae2ae4e27bc38f648d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76790
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
No drivers are needed/available, so hide the device to prevent
an unknown device from showing under Device Manager.
Linux does not use the ACPI _STA so no effect there.
Change-Id: I02efb64a845edc6e4fc559e7e99a7825abf4c2aa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
While FSP programs the VmxEnable UPD per CONFIG_ENABLE_VMX, it doesn't
set the lock bit, which prevents Windows from enabling virtualization
on devices which support it. Call set_vmx_and_lock() to ensure the
lock bit is properly set.
TEST=build/boot Win11 on google/ampton,reef; verify virtualization
enabled.
Change-Id: I54ea0adb0a6d10f2df18f604b1f1e5a7a145dfb3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76804
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Typically we set SaOcSupport to allow overclocking RAM, but addw2 saw a
high rate of errors when using the provided 3200 MHz DIMMs. Disable OC
so modules run at the standard 2933 MHz.
Change-Id: I469b9c73d2e6bfa0b3c9175bcc87584aeaa95f75
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Perform a codec reset to match all other System76 boards.
This applies commit 705ebbea04 ("mb/system76: Reset Realtek codec
before configuring") to boards that were added later.
Change-Id: I618cc042f1803d07bfc067d1999e1c44ab4a1fa9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Users report having the touchscreen as a wake device causes many
spurious wakeups due to proximity to the keyboard when the lid is
closed, so remove it as a wake source.
TEST=build/boot google/glimmer, observe no unintended wakeups when
the lid is closed.
Change-Id: Id16cabcd21afa0b373ecddd9eb3b0b8befb71576
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76794
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This matches the change done for DDR4 in commit 8509c25eec
("soc/intel/alderlake: Allow channel 0 for memory-down").
Fixes detection of the on-board RAM (Samsung M425R1GB4BB0-CQKOD) on the
System76 Lemur Pro 12 (Clevo L140AU). The Clevo L140*U are the only
boards in the tree using mixed memory topology.
Change-Id: I395f898472a9a8f857fd6b0564b95c787b96080b
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Set the ACPI SSID using Google's project campfire ID for EVE, to allow
coolstar's Windows drivers to identify the device (since it uses a
generic ACPI _HID). Custom drivers are necessary under Windows since
the touchpad firmware is not fully I2C-HID compliant.
TEST=build/boot Win11 on google/eve, verify touchpad fully functional.
Change-Id: I3b8d56ff01d4cca7ba5c02f1aaab1a7049607dbc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
CB:73353 switched ADL boards from using S0ix to S3. DevSlp can be
reenabled now as it no longer breaks suspend.
Change-Id: I618696833b7ed02e49c35d06021b730be91d879e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
System76 EC since system76/ec@99dfbeaec3 sets PL4 values through PECI
based on AC state for all boards. Remove the static PL4 value from
coreboot since it won't be used.
Change-Id: I2bc37f12aab11910b4fe029efcee891a93257529
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Do not reconfigured LSX0 so that the FSP values are used.
Change-Id: I76e2ab01a5e853e3c1ac78b471ea0aa87d703d52
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76751
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EAPD pin needs to be enabled and set in order for the headphone
jack to work properly. It's already done for the speaker in the
beep verbs, but needs to be done for the HP jack as well in order
for output to work properly under Windows.
TEST=build/boot Win11 on LINK, verify headphone output functional
when headphones plugged in.
Change-Id: I411d7317aefc1154635c4c17ca0dc1e37c9f40f4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76746
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
