Set up External Temperature to read via thermal diode/resistor
into TMPINx register by setting thermal_mode switch.
Original-Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>
Change-Id: I0e8621b92faa5c6246e009d2f852c8d4db484034
Original-Reviewed-on: https://chromium-review.googlesource.com/260545
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Original-(cherry picked from commit 973e2d393f2595b756f8aa20f6fbe3b6e045621a)
Original-Reviewed-on: https://chromium-review.googlesource.com/262340
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12798
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The RPU Clock register defaults to on for all clocks.
This is modified to OFF, and the MIPS clock control modified to ON,
by default. This is because the linux kernel will manage the
clocks at all times, but the RPU can only disable clocks if the WIFI
module has been loaded.
Change-Id: I155fb37afd585ca3436a77b97c99ca6e582cbb4f
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
GRAM is 421056 bytes. The end of the SRAM region (GRAM plays the role
of SRAM) was placed at a 4K aligned address, resulting in a size of
408KB.
Change-Id: I9fa32ab818d600e7447bcac895e4b8c438f2f99d
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The base address for the I2C dividers (DIV1 and CLOCKOUT)
was erroneously set to the toplevel clock controller base
address and not to the correct peripherals clock controller
base address.
Change-Id: I66bbc1e741bcf6251babee7ddd6376d49d7cb3d1
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12771
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This region must be mapped uncached. This is necesary for an
U-boot payload which will obtain all register base addresses
as physical addresses from the device tree and will use them
as such.
Change-Id: Ib5041df7d90c6ef61b7448a18dd732afbd9489ca
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12770
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When used with a U-boot payload it will need this region
identity mapped also, so we're defining it in preparation
for that functionality.
Change-Id: I27cee5b58cb899433b52bd06df07b5f2105212af
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12768
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Use SYS PLL in integer mode by default to reduce jitter.
DSMPD_MASK is defined and can be used to switch to fractional mode.
Tested on pistachio bring up board.
Change-Id: Ie6d2aca71c7af86b0993c804329e6d03e26ff754
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12767
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Board uses x4x native raminit
Board boots into Debian 8 with full graphics
IRQ9: nobody cared, gets disabled
(PIC needs IRQ settings?)
VGA:
- VGA native init works in grub with analog connector
- Fails to boot with both channels of ram populated
Change-Id: I7417813456817529b8cbaace45cefe47467d0a82
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/11306
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Passes memtest86+ with either one or two sticks of 2GB ram
but memory map needs a hole at 0xa0000000 to 0xc0000000
Change-Id: Ib34d862cb48b49c054a505fffcba1c17aeb39436
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/11307
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This code looks like it was created from a disassembly of some
other driver. Attempt to fix it, without hardware or documentation.
CID 142909: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
Change-Id: I9b9cadf2acdba73913aad6bbe0d14ad64a652915
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12774
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
The FMD is board-specific, so it makes sense to have it in the
mainboard menu.
Change-Id: I52fba5ced869d51d10065f8c9ebd258d3a1d4156
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/12805
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Non-code flow assembly stubs do not have to be included in
bootblock.S, now that we have more freedom in bootblock linking.
Rather than bringing these stubs to the config system, just link them
in the bootblock.
Note that we cannot fully remove CHIPSET_BOOTBLOCK_INCLUDE at this
point, as some intel SOCs use this stub for code flow.
objdump -h build/cbfs/fallback/bootblock.debug on a few random boards
confirms that the appropriate sections are still included in the
final binary.
Change-Id: Id3f9ece14e399c1cc83090f407780c4a05a076f0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/11856
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Since the introduction of the new (interim?) master header, coreboot
searches the whole ROM for CBFS entries. Fix that by aligning it on top
of the ROM.
Change-Id: I080cd4b746169a36462a49baff5e114b1f6f224a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/12810
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
According to the PNP ISA v1.0a spec, config registers in the range of
0xf0 up to 0xfe are vendor defined and may be used for any purpose.
Config register 0xff is reserved and is defined as such.
Currently, only vendor specific registers 0xf0, 0xf1, 0xf4, and 0xfa
are able to be set using the PNP_MSCx bit flag masks.
This patch adds support for all 15 vendor specific config registers,
and updates the existing superio pnp_info to use them where appropriate.
Change-Id: Id43b85f74e3192b17dbd7e54c4c6136a2e59ad55
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/12808
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Boots to console on Gigabyte GA-G41M-ES2L
Ram initialization *not* included in this patch
VGA native init works on analog connector
Change-Id: I5262f73fd03d5e5c12e9f11d027bdfbbf0ddde82
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/11305
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In order for a U-boot payload to work properly the soc_registers
region (device registers) needs to be mapped as uncached.
Therefore, add a coherency argument to the identity mapping funcion
which will establish the type of mapping.
Change-Id: I26fc546378acda4f4f8f4757fbc0adb03ac7db9f
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12769
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This requires changes the interface that sets up the system
PLL to support a given reference devider value and given
feedback value.
Also, this requires a change in the dividers used for UART,
USB, I2C setup.
Change-Id: I98cf7c655dbb3e95b8fcee3c7f468122021c70b5
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12765
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The EHCI debug device setup code was removed from broadwell in
commit 49ee5ef: http://review.coreboot.org/11874
However the generic device setup code is in the southbridge/common/intel
directory while broadwell is in the soc directory so this is not used.
Add it back to the broadwell soc to fix undefined reference compile
errors with 'pci_ehci_dbg_dev' and 'pci_ehci_dbg_enable'.
This was tested to compile and produce romstage and ramstage output on a
google/samus board.
Change-Id: Ia93825a1e21a770f6c82d0989cb97980a5c700d6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/12794
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The port0 and port1 registers were swapped, which meant it did
not work to apply the DTLE settings to the correct SATA port.
This was tested on an unreleased mainboard but is verified with
the documentation to be the correct register addresses now.
Change-Id: Ifb8890a563a741129ec8ddf72e73ab021c7d33da
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/12793
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Locking down the SPI controller with a specific opcode menu kills
the SPI console. Skip this when the SPI console config option is
enabled.
This was tested using an em100 and google/samus board to ensure
the console output does not stop at the finalize step.
Change-Id: Ie460f583214b47544e92d4afa8ef862563a11e36
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/12792
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Upcoming versions of IASL give a warning about unused methods. This
adds an operation after the read to use the local variable and avoid
the warning.
The warning can be completely disabled on the command line, but as it
can find real issues, my preference is to not do that.
Fixes warnings:
dsdt.aml 640: Store (CTMP, Local0)
Warning 3144 - Method Local is set but never used ^ (Local0)
Change-Id: If55bb8e03abb8861e1f2f08a8bcb1be8c9783afe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Remove it8772f c includes
- Add a new LED API, it8772f_gpio_led
- Stumpy: using it8772f_gpio_led
BUG=chrome-os-partner:28232
BRANCH=Guado
TEST=emerge-guado coreboot chromeos-bootimage
Change-Id: I08de52515d3c1e7e85d1761c09a0cebffda7dda3
Signed-off-by: David Wu <David_Wu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/241813
Tested-by: David Wu <david_wu@quantatw.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: David Wu <david_wu@quantatw.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12797
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Looking at the A10 datasheet, N should go in bits 2:0, but
was being cleared by shifting it left by three bits, then
anding it with 7.
Fixes coverity warning:
CID 1241888 (#1 of 1): Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: (n << 3) & (7U /* 7 << 0 */) is always 0 regardless
of the values of its operands. This occurs as the bitwise second operand
of '|'.
Change-Id: I17e71a73adf37a62607e8e5865b1da749d7278aa
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12779
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Baytrail has I2c Busses 0 to 6, so is supposed to error out
if the I2c driver is called with 7 or greater. Due to an off-by-one
error it could be called with bus 7.
Fixes coverity warning:
CID 1287074 (#1 of 1): Out-of-bounds read (OVERRUN)
3. overrun-local: Overrunning array base_adr of 7 4-byte elements at
element index 7 (byte offset 28) using index bus (which evaluates to 7).
Change-Id: I7caec60298cf27bd669796e0e05e4a896f92befd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12781
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
- Also update post code comment to keep under 80 characters.
Change-Id: Id0fd0ee5660f2628fe33188855bebb6e3eea8d2e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12780
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Bit 8 of the MR register is automatically set by the PHY
during memory initilization but having it set in the
register leads to a more clear understanding.
Tested on Pistachio bring up board; DDR2 and DDR3 are
initialized properly.
Change-Id: Ie6953e2a96ba2961521b372d280f362ee1c52b94
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12764
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Switching on DQS Gate Early and DQS Gate Extension with
500R DQS/DSQN Resistors. This setup was recommended by
Synopsys.
Tested on Pistachio bring up board; DDR2 and DDR3 are
initialized properly.
Change-Id: I6cd3888d506effe71f5d535367525af2e51f6ba3
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
root_port_init_config() pcie.c wasn't initializing a variable before
passing its pointer to pch_iobp_exec(). pch_iobp_exec() wrote the
uninitialized value into a register.
In theory, the register would only be used if data was being written,
and pch_iobp_exec() was being used to read the data, not write it, so
this change shouldn't have any practical effect.
Fixes coverity error:
CID 1293134 (#1 of 1): Uninitialized scalar variable (UNINIT)
Change-Id: I5d17863d904c6b1ceb30d72b94cd7a40c8fbb437
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12778
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
As the southbridge largely controls the PCI[e] configuration space
this patch moves the resource allocation from the northbridge
to the southbridge when the extended configuration space region
is enabled.
Change-Id: I0c4ba74ddcc727cd92b848d5d3240e6f9f392101
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12050
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
When enabling the IOMMU on certain systems dmesg is spammed with I/O page faults like the following:
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.0 domain=0x000a address=0x000000fdf9103300 flags=0x0030]
Decoding the faulting address:
0x000000fdf9103300
fdf91x Hypertransport system management region
33 SysMgtCmd (System Management Command) = 0x33
3 Base Command Type = 0x3: STPCLK (Stop Clock request)
3 SMAF (System Management Action Field) = [3:1] = 0x1
1 Signal State Bit Map = [0] = 0x1
Therefore, the error appears to be triggered by an upstream C1E request.
This was eventually traced to concurrent access to the SP5100's SPI Flash controller by
multiple APs during startup. Calls to the nvram read functions get_option and read_option
call CBFS functions, which in turn make near-simultaneous requests to the SPI Flash
controller, thus placing the SP5100 in an invalid state. This limitation is not documented
in any public AMD errata, and was only discovered through considerable debugging effort.
Change-Id: I4e61b1ab767b1b7958ac7c1cf20eee41d2261bef
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12061
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The binary is taken from blobs, so the script should live over
there, too.
Change-Id: I3cc0aabc846c352ccf5cb348132b320a37f273a6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12725
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The usage of the pin has changed and therefore this pin needs
to be set up as output and drive low initially.
Change-Id: Ie3eb9cc703f7f73d59fad52ea9e514997d84606a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12754
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
If we select CONFIG_GDB_STUB without CONFIG_SERIAL:
build/console/console.romstage.o: In function `__gdb_hw_init':
[...]src/include/console/uart.h:74: undefined reference to `uart_init'
build/console/console.romstage.o: In function `__gdb_tx_byte':
[...]/src/include/console/uart.h:75: undefined reference to `uart_tx_byte'
build/console/console.romstage.o: In function `__gdb_tx_flush':
[...]/src/include/console/uart.h:76: undefined reference to `uart_tx_flush'
build/console/console.romstage.o: In function `__gdb_rx_byte':
[...]/src/include/console/uart.h:77: undefined reference to `uart_rx_byte'
Note that CONFIG_GDB_STUB should also work trough usbdebug,
But due to the lack of testing, it has been disabled when added.
This commit gives more information on the issue:
f2f7f03 console: Add console for GDB
Change-Id: I9accf8189dfd2c4ae379c03649d2e5863183457b
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12708
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is to make towiki pick that information, to make
these boards end up in the laptop list at:
http://www.coreboot.org/Supported_Motherboards
Change-Id: Ibf8bf4bf6566080a34687e36675d4c4c8b89f334
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12716
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Implement system reset by calling the watchdog soft reset.
Following the soft reset, the SoC will reset to the same logic
state and therefore have the same effect as a hard (power-on)
reset except for:
- watchdog scratch registers will be unaffected (hard reset
will clear them)
- the real time clock will be unaffected
BUG=none
TEST=tested on Pistachio bring up board
Change-Id: I1332c2249c756f6d8574fc5c407de52f88e60f08
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12755
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Verified boot needs hard_reset() now, so offer a dummy implementation
for the Imagination chip. Sorry, I don't have the specs for this chip
anymore to make a real implementation, but I would like to keep this
code from bit rotting.
Change-Id: I15aa47f7d248b99901a2ac0e65a46b43d7718717
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12723
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This file became obsolete when FMAP code moved to src/lib/ and is no
longer built by any Makefile. Let's remove it to avoid confusing people.
Change-Id: I55639af28f9f3d4c4cb0429b805e3f120ecc374e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12753
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The remainder of the divide operation was being placed into a Local,
but was never being used, causing an IASL warning. Since this
field is optional, just remove the Local.
Fixes IASL warning:
dsdt.aml 640:Divide (Multiply (CTDN, 125), 100, Local0, PL2V)
Warning 3144 - Method Local is set but never used ^ (Local0)
Change-Id: I0b43ef638b1bc3e1163c45f31f8da57aa0d39e22
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12706
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Section 6.1.3 (Text Strings) of the SMBIOS specification states:
If a string field references no string, a null (0) is placed in that
string field.
Change smbios_add_string() to do that.
Change-Id: I9c28cb89dcfe2c8ef2366c23ee6203e15b7c2513
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12697
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
strncmp continues to compare the characters in the input strings past any
null termination it may encounter. Null termination check is added.
Reviewed-on: https://chromium-review.googlesource.com/314815
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Tested-by: Hannah Williams <hannah.williams@intel.com>
(cherry picked from commit ca7022752115eddbcb776f0c0d778249555ddf32)
Reviewed-on: https://chromium-review.googlesource.com/315130
Change-Id: Ifc378966dcf6023efe3d32b026cc89d69b0bb990
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12721
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is to match the layout of the non-fsp baytrail to make comparisons
easier and possibly remove duplicate files.
Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12686
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The SB600 code had the base address of the HPET hardcoded throughout.
It looks like the plan was to have it be updated in ACPI if needed,
but this wasn't ever implemented. The variable names being used to
do this update were the same, causing an IASL warning. Because of
this, the operation to update the HPET address actually did nothing.
This was fine, because it didn't actually need to be updated.
- Replace all that code with a #define.
- Add and update some comments in the same area.
Fixes IASL warning:
dsdt.aml 1505: Store(HPBA, HPBA)
Warning 3023 - ^ Duplicate value in list (Source is the
same as Target)
Change-Id: I9ba5fe226a4a464e0045ce7d3406898760df5e5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12705
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
The macro PCI_DEV_PIRQ_ROUTE ends with a comma and escaped newline.
Ending a macro with an escaped newline is always wrong.
The final comma is not necessary, as all uses of PCI_DEV_PIRQ_ROUTE()
properly separate calls with a comma.
I haven't investigated whether this is causing a real issue, but it should
be leaving gaps in struct baytrail_irq_route.pcidev.
The non-FSP baytrail does not have this issue.
Change-Id: If6782176068b07cb3bc819c00d1cdb1b618bcea8
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12696
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
$(objgenerated)/empty would touch files before the directory
is created on parallel builds.
Thanks to reproducible-builds.org for hitting this bug.
Change-Id: I7565e9fe130b4e9deaf1c7b9d568ff90b00dda52
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/12717
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Implement hard_reset() as power_reset() to make
vboot happy.
Change-Id: I16831055bd6ba8a8c95836fcf31f29c068153fcc
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12722
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
On Skylake systems, the bootblock fails to compile with the following
error message:
bootblock_simple.c:6.1:
0x13930e0 copy Internal compiler error: non dominated rhs use point
0x13a3f70?
Aborted (core dumped)
The option -fno-simplify-phi works around the issue, but will cause the
code to use more registers, hence we also need to enable -mcpu=p4 (see
intel/truxton mainboard for another example of where this has been done
in the past)
Change-Id: Iea1a1ba18d76c7323bb626c5f4b0032e4ee04a86
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12719
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The ALIGN_CURRENT macro relied on a local variable name
as well as being defined in numerous compilation units.
Replace those instances with an acpi_align_current()
inline function.
Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12707
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This paves the way for AP printk spinlock on AMD platforms
Change-Id: Ice42a0d3177736bf6e1bc601092e413601866f20
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/11958
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The symbols CHROMEOS_VBNV_EC, EC_SOFTWARE_SYNC, and VIRTUAL_DEV_SWITCH
should only be selected if CHROMEOS is selected.
Change-Id: I07ef631d63be53cf99a6bf61d0e91b88728dbba3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12659
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We still add a master header for compatibility purposes, and the default
layouts don't cover anything non-coreboot (eg. IFD regions) yet.
The default layouts can be overridden by specifying an fmd file, from
which the fmap is generated.
Future work:
- map IFD regions to fmap regions
- non-x86: build minimalistic trampolines that jump into the first cbfs
file, so the bootblock can be part of CBFS instead of reserving a
whole 64K for it.
- teach coreboot's cbfs code to work without the master header
- teach coreboot's cbfs code to work on different fmap regions
Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/11692
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The memory init code needs to match the saved mrc data. To
ensure that invariant holds supply the FSP version when
using the mrc cache API.
BUG=chrome-os-partner:46050
BRANCH=None
TEST=Built and booted on glados. Verified version mismatch checking
works.
Change-Id: I3f6dd19cb15a18761d34509749adafc89a72ed2d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12701
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to allow for updateable memory init code on intel x86
platforms one needs to ensure the saved mrc data matches the code
consuming the data. To that end add a version field to the saved
data structure.
BUG=chrome-os-partner:46050
BRANCH=None
TEST=Built and booted on glados. Suspended and resumed. Also verified
version mismatch path.
Change-Id: Ie86db1750af5d9bff6446999b0d04b60612f8d29
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12700
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The CONFIG_ prefix should be reserved for Kconfig symbols.
Change-Id: I1d3141e0f5f9e1161bc7f88158af8a5d5780829c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12564
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Don't select SPI_ATOMIC_SEQUENCING unless SPI_FLASH is being used.
warning: (... SOC_MEDIATEK_MT8173) selects SPI_ATOMIC_SEQUENCING
which has unmet direct dependencies (SPI_FLASH)
Change-Id: I93e9a7102d1d0ef62565110b5b3b677da8d0c72b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12657
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These had typos ARM_STAGE_ARM7 instead of ARCH_STAGE_ARM7
Change-Id: Iffe8fecb3e52a50ff02b774478a10c353093688b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12660
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
According to the ACPI Spec for CondRefOf, the result argument is
optional. In all of these locations, it was getting set but not
used, creating a warning in new versions of IASL. Since it's
an optional argument, just remove it.
dsdt.aml 640: If (CondRefOf (\_S3, Local0))
Warning 3144 - Method Local is set but never used ^ (Local0)
Change-Id: I758d198c33e585a6a4ad2c1c70f2370a01af5138
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12693
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The newer versions of IASL are unhappy when an operator
has the same object as both source and destination.
The warning can be completely disabled with a command
line argument, but in general, I'd really rather not
just disable warnings.
The bits in this register are write 1 to clear, so reading and
writing the same register is what we want to do. Instead, store
it in a temporary register then write it in a second operation.
Fixes warning:
dsdt.aml 1396: Store(PWST, PWST)
Warning 3023 - ^ Duplicate value in list
(Source is the same as Target)
Change-Id: I52d73d4431db237be83016d67cd397f31b53d9c6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
According to the ACPI Spec for CondRefOf, the result argument is
optional. In all of these locations, it was getting set but not
used, creating a warning in new versions of IASL. Since it's
an optional argument, just remove it.
dsdt.aml 22: if(CondRefOf(\_OSI,Local1))
Warning 3144 - ^
Method Local is set but never used (Local1)
Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12692
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
According to the ACPI Spec for CondRefOf, the result argument is
optional. In all of these locations, it was getting set but not
used, creating a warning in new versions of IASL. Since it's
an optional argument, just remove it.
dsdt.aml 640: If (CondRefOf (^GBUF, Local0)) {
Warning 3144 - Method Local is set but never used ^ (Local0)
Change-Id: Iddf46a4faab19019882847917397eee0614302b9
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12695
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
According to the ACPI Spec for CondRefOf, the result argument is
optional. In all of these locations, it was getting set but not
used, creating a warning in new versions of IASL. Since it's
an optional argument, just remove it.
dsdt.aml 640: If (CondRefOf (^GBUF, Local0)) {
Warning 3144 - Method Local is set but never used ^ (Local0)
Change-Id: Ie2f46808e92c309a63ba7661bcbd77402a08366a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12694
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The BBAR register (BIOS Base Address Configuration Register) defined in
the ICH9 datasheet does not exist in the Bay Trail E3800 datasheet.
Accessing it seems harmless, but should likely be avoided.
Change-Id: I5d9a6a1ccead84c8996796f516a2bdc5f248cfef
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that only CBFS access is supported for finding resources
within the boot media the assets infrastructure can be removed.
Remove it.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Auto-indent did me wrong, and I didn't notice it.
Change-Id: I5a736cf53a3bdbe57b28b2d6a55befd341d8dfd8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12655
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
We never defined the flash size for this board, so the (too small)
default was used. Instead, adopt the size given in depthcharge's fmap
description.
Change-Id: I63782922ee05a9595d6c0de56750460ebb67aec6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12674
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Make the definitions of rules compliant with
others.
Change-Id: Ieef3a9c3fae5beaa1ea3e14e890cfb9145090c3b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12685
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
At some point in the past disconnected PCIe bridges were completely
disabled to work around a hang on bridge probe. This hang was
resolved at some point, and the disconnected PCIe bridges should
be enabled to receive a bus number per the RPR.
This resolves a slew of warnings in the Linux boot log regarding
invalid bridge configurations for disconnected bridge devices.
Change-Id: Ic26e2d62ec5ddb9f22275c2afec7d560326263c7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12673
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
ELOG requires SPI_FLASH, so don't bother selecting if if SPI_FLASH isn't
available.
Change-Id: I080ac47e74aba820c94409d4913647abee215076
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The CONFIG_ is only used for Kconfig symbols outside of Kconfig. If
used inside Kconfig, you'd end up with CONFIG_CONFIG_GOP_SUPPORT when
it was used in the C code.
Change-Id: I572323ef08fdd937d33ded1c27a418b3ad856147
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12664
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The USE_FMAP Kconfig symbol doesn't exist, so remove things that are
depending on it not being enabled.
Change-Id: I1946f5d13a762ab07744a1d9a6cb754433e6701d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12663
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The existing code for the Lenovo T400 works without changes on the
Lenovo T500. Same HDA verbs are provided by Lenovo BIOS on both
laptops.
Change-Id: I300408a8a0ed00476aee6061925befc2822fb505
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-on: https://review.coreboot.org/10545
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
CPU_MICROCODE_IN_CBFS was renamed to SUPPORT_CPU_UCODE_IN_CBFS in commit
66e0c4c8 (cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFS)
Both CPU_MICROCODE_IN_CBFS and SUPPORT_CPU_UCODE_IN_CBFS were present,
so just remove CPU_MICROCODE_IN_CBFS.
SMM_MODULES was removed in
commit 44cbe10f (smm: Merge configs SMM_MODULES and SMM_TSEG)
Change-Id: Icdd4fcc5a3a97aee443742aaab3df92b53ff4589
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
QEMU can do this for a while now.
Change-Id: I3a5027a7afc9dd18463d26cb42fe68747a89f6b0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/12656
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The Kconfig symbols were missing an underscore, so were not getting
evaluated properly.
Change-Id: I619cf3f44f44f9c9699482d64164d3db28cd4c8f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12559
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It seems that no one add period in Kconfig.
Change-Id: Ie9c585a8e6f1a73036b92b2873dc19284d82dc39
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12668
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Add a Kconfig option to set the firmware descriptor to allow EM100 use.
Change-Id: If5d7cd6ad671f0328ee5be0b5e660dbc837fcac3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12637
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The existing code incorrectly used standard PCI access
calls in the bootblock. Use the I/O PCI access calls
as the normal PCI access mechanisms have not yet been
set up.
Also ensure the recovery jumper GPIO has been set to
input mode before reading it.
Change-Id: Id626d01526427004b2404e4d9b44d7c987d172d1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12651
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The _HID was present for the top level BTNS and LEDS Devices, but
was missing in the individual devices.
The alternative would be to supply the GPIO being used as an _ADR
object, but since it looks like the driver already has another
method of handling that, it isn't required.
Fixes these IASL warnings:
dsdt.aml 1522: Device (BTN1)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 1567: Device (LED1)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 1576: Device (LED2)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 1587: Device (LED3)
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
Change-Id: I67c48084a6ee2a104ffff2b5a986d24a51ee49e1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12582
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Kconfig symbols CONFIG_ACPI_INCLUDE_PMIO and CONFIG_ACPI_INCLUDE_GPIO
were never added to the coreboot codebase when the Rangeley code was
brought in from Sage. These symbols disabled ACPI code that was unused
because it caused dmesg warnings due to conflicts with drivers trying to
claim the same addresses as the ACPI code. Because it could be used on
some other platforms, it was left in instead of being completely
removed.
- Change the Kconfig symbol names to simple #defines in the mainboard
code.
- Add the #defines along with comments to the reference platform.
- Hook everything together in dsdt.asl
- Update new mainboard littleplains the same way.
Change-Id: I1f62157c6e447ea9b7207699572930e4711fc3e0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12552
Reviewed-by: David Guckian <david.guckian@intel.com>
Tested-by: build bot (Jenkins)
In coreboot, bool, hex, and int type symbols are ALWAYS defined.
Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12560
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PER_DEVICE_ACPI_TABLES Kconfig symbol is no longer used as it was
removed in commit 83f81cad (acpi: Remove monolithic ACPI)
Change-Id: Ie6ba252f6e7d33da9d4500f1201367f116e4c505
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12554
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Devices that have their interrupt routing set to A, A, A, A don't get
any interrupt values assigned because that series evaluates to 0. The
code that sets the interrupt values checks to make sure a value is set
by verifying that it's not 0. On Bay Trail, these are all
single-function graphics devices, so by changing one of the unused
interrupt lines from A to any other value, it assigns the values
correctly.
This issue did not affect ACPI interrupt routing.
This is just a workaround, and the root issue still needs to be fixed.
Change-Id: I4e6fe56084cbe86b309da15d61b296f1936458ec
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12630
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Devices that have their interrupt routing set to A, A, A, A don't get
any interrupt values assigned because that series evaluates to 0. The
code that sets the interrupt values checks to make sure a value is set
by verifying that it's not 0. On Bay Trail, these are all
single-function graphics devices, so by changing one of the unused
interrupt lines from A to any other value, it assigns the values
correctly.
This issue did not affect ACPI interrupt routing.
This is just a workaround, and the root issue still needs to be fixed.
Change-Id: I78866e3e0079435037e457a4fb04979254b56ee2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12629
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The folder southbridge/intel/common/firmware is already being included
so does not need to be added a second time here.
Change-Id: I60d795a60c772547278a5a5e0c9a023a93f90417
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12636
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The microcode for the Rangeley chip is supplied as .h files in the
Rangeley FSP POSTGOLD4 package.
When the rangeley microcode gets put into the blobs directory, this
can be reverted and the binary file put into the makefile.
Change-Id: I30e7436f26a247bc9431f249becfa5fe8c581be7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12335
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The eagleheights platform had 3 warnings:
The SIO device needs an _ADR object to specify the address in addition
to the operating region.
Not all the paths through the _OSC method returned a value. According
to the ACPI spec (5.0 & 6.0), bit 2 needs to be set for an unrecognized
GUID.
dsdt.aml 341: Device(SIO) {
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
dsdt.aml 140: Method (_OSC, 4)
Warning 3115 - ^ Not all control paths return a value (_OSC)
dsdt.aml 140: Method (_OSC, 4)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _OSC)
- Remove Kconfig default disabling IASL warnings as errors.
Change-Id: Iab52f19b96468e142b06430d99ba1d9f367d126e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12522
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=chromeos-2015.07
BUG=none
TEST=verified on Oak rev3
Change-Id: Ied991f13b73e70b91cc267222f351b588df8df66
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4bc08ce28611d8b940642483c09614d2b8205c1f
Original-Change-Id: If78e154ff7f553f65aa44d370820cc8c7f829c96
Original-Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297224
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12609
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The E38xx legacy uart fires IRQ4, not IRQ3.
PCI based IRQ A is switched from IRQ4 to IRQ3,
to get a working IRQ for the legacy uart.
Change-Id: Ibc8e824c92bf1b9a92594ddc5d8a06726c9f1744
Signed-off-by: Michael Tasche <michael.tasche@esd.eu>
Reviewed-on: https://review.coreboot.org/12622
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
- Move initialization of entry to later in main.
- Make boot_mode an unsigned char - no need to use int.
- Remove unnecessary variable filenames.
- Only get and try to boot fallback once.
Change-Id: I823092c60dd8c2de0a36ec7fdbba3e68f6b7567a
Test: compiled.
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12574
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The proper return value to signal an error from cbfs_prog_stage_load()
is -1, not 0.
Change-Id: Ie53b0359c7c036e3f809d1f941dab53f090b84ab
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This patch force AGESA to use basic SPI read mode.
Without it board hangs during spi configure if W25Q32 chip is used.
Change-Id: I3e17cd21702626be5061d2fc14adc0c22f167efb
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: https://review.coreboot.org/12580
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of the SEABIOS_MALLOC_UPPERMEMORY option, use a saved SeaBIOS
.config file to do the same thing.
Change-Id: I29110a382b7770329ef938876426e571fbbbb339
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12569
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
BRANCH=none
BUG=none
TEST=Oak build pass
Change-Id: Ic2fd9b2ec0592d1f7195d72c60dab15961de0a9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d0b00a779b87b0b625cc2bccd8f7470b79e6410
Original-Change-Id: Id9f17d64e9e30946817b86ec8cdfe67ea3dbc798
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292675
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12607
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
update dptf TSR1 & TSR2 critial points from 70 to 75
TSR1 & TSR2 are reach 68 degree that is close to 70 degree afer SVPT
test, change the point will avoid to trigger critial in our factory
run in test
BRANCH=none
BUG=none
TEST=build and boot chell DUT
Change-Id: Ie5b8b24d82e929a7bd254967b70b61fda2c8bd0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf29fee19edf425010cc76af95b7a8e73a3d82bb
Original-Change-Id: Idb9dd77432cfd246c1c612e52c6f945352e265ca
Original-Signed-off-by: Wisley Chen <Wisley.Chen@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313967
Original-Commit-Ready: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Chen Wisley <wisley.chen@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Chen Wisley <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/12604
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
L2C will be released after DRAM is initialized. Move PRERAM_CBFS_CACHE
from SRAM_L2C to ensure that it can be switched correctly.
BRANCH=none
BUG=chrome-os-partner47952
TEST=none
Change-Id: I255a0116148777d384dda43682365a5e2375cb5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 19fcc170e57da514aee9e22289619729ddc2f792
Original-Change-Id: If3d9c1ef05dee0a10ee9151b63b8fd92cc9def51
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313888
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12602
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Most devices do not use SPI before they initialize CBMEM. This change
initializes spi_flash in the CBMEM_INIT_HOOK to initialize the postram
cbfs cache so it is not overwritten when boot_device_init is called
later.
BUG=chromium:210230
BRANCH=none
TEST=confirm that the first cbfs access can occur before RAM initialized
and after on panther and jerry.
Change-Id: If3b6efc04082190e81c3773c0d3ce116bb12421f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ab242786a16eba7fb423694f6b266e27d7660ec
Original-Change-Id: I5f884b473e51e6813fdd726bba06b56baf3841b0
Original-Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/314311
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12601
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds GPIO mappings for PCH_BUZZER, AUDIO_DB_ID,
AUDIO_IRQ and BOOT_BEEP.
BUG=chrome-os-partner:47513
BRANCH=none
TEST=Built for kunimitsu but not verified on Fab 4.
Change-Id: I0172df3aa2a5c4bfc24422aa0bfb7e5f677d37c9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ba66bef6d402a1040f0f13bc828de400bc6371b7
Original-Change-Id: I1f2ed8fc283883a523a77e07de14ed90057b719b
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311806
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12600
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Disable the kepler device to save power and enable S0ix testing.
It has been disabled in the ME image and was not working anyway..
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Change-Id: I6640c7a09d418ba4b4de6f16138c124436dd8758
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6490769a32539cb6ef429717f021519c152a4a54
Original-Change-Id: If6e384dd2218c6a110747a489329a59fa6433c02
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313827
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12599
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
- Disable kepler device, it is removed and was not used on proto anyway.
- Enable GPP_D22 as GPO to control I2S2 buffer for bit-bang PDM.
- Disable HS400, this is breaking some devices on proto boards and
is being disabled to reduce risk for EVT build.
- Change Type-C USB2 port drive strength.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=build and boot on chell proto
Change-Id: Icf31f08302c89b2e66735f7036df914c0a0b9e8c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d00abc12efa69a99e6b0272228f52fb29e6b9180
Original-Change-Id: I63bda0b06c7523df9af9aed9b82280133b01d010
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313825
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the audio controller device to ACPI and define the _DSM handler
to return the address of the NHLT table, if it has been set in NVS.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=build and boot on glados and chell
Change-Id: I8dc186a8bb79407b69ef32fb224a7c0f85c05bc4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6b73fba375f83f175d0b73e5e70a058a6c259e0d
Original-Change-Id: Ia9bedbae198e53fe415adc086a44b8b29b7f611d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313824
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12597
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This code is doing nothing and is not needed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Change-Id: I910d443f09a94de1ee0de03cda0577b8847b2de8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ac09fdd7673e5fceb8bfaf1076a8a91e54fc31af
Original-Change-Id: Id989c82853d5a5d5b750def073d34c39816a48d5
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313823
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12596
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add post codes for the various FSP phases and use them as appropriate
in FSP 1.0 and 1.1 implementations.
This will make it more consistent to debug FSP hangs and resets.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados and chell
Change-Id: I32f8dde80a0c6c117fe0fa48cdfe2f9a83b9dbdf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3b616ff3c9d8b6d05c8bfe7f456f5c189e523547
Original-Change-Id: I081745dcc45b3e9e066ade2227e675801d6f669a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313822
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adding print for full fsp revision which includes:
0:7 - Build number
8:15 - Revision
16:23 - Minor version
24:31 - Major version
BRANCH=NONE
BUG=chrome-os-partner:46050
TEST=Built for kunimitsu and tested fsp revision is printed properly.
Change-Id: If2739e7cccd97e4b39da503a9d61222cde03bc95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c49be46f8d2085a620abac74126de5c3b634e649
Original-Change-Id: I2223cce22fb3d39faa37902d415d5fdbe321add6
Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310173
Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12594
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update Memory ID for Proto board
Update detection of single/dual channel memory to use SPD Index (Memory ID)
Remove boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Build and Boot Lars (Proto)
Change-Id: I100b0fec4bf555c261e30140109cb0f36576130c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a4fddf4f1a4441fca8783cfa451e220ff986d8
Original-Change-Id: I636e881cb3fb9a0056edea2bc34a861a59b91c8f
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313903
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12593
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Updated Micron SPD data to correct values
BUG=none
BRANCH=none
TEST=Tested on FAB 4 with Micron Dimm
CQ-DEPEND=CL:312546
Change-Id: Iffe2917f083e4de7944c7f249cbf55bd199f6282
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00234d81df38139312145c89cbf38d8ac3af5735
Original-Change-Id: Ifcc85cd1aae61e02b820cb25733dfb0680410107
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313003
Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com>
Original-Tested-by: Freddy Paul <freddy.paul@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12592
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Changed index 3 to be an exception of the default Rcomp Value
BUG=None
BRANCH=None
TEST=Tested on FAB 4 SKU 1
Change-Id: I154c254835c4f6995183840cc241feeb9a448cdb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f08eba3cf623b5869a7bb03fb3b6ba084cdd1622
Original-Change-Id: I0fbcff2c3526c4ed7cf90088ca23b43774cb9f8f
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/12591
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Updated Memory IDs and SKU IDs for FAB 4
Updated detection of single/dual channel memory to use SPD Index (Memory ID)
Added spd files for new dimms
Removed boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Tested on FAB4 SKU1 and SKU3
Change-Id: I60403c0e636ea28797d94cff9431af921631323e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce39dc3b0b9448635f878ce8c1aea5b4743594c4
Original-Change-Id: I870b3dfa2c4f358defb9263e759de477bb32e620
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312546
Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com>
Original-Tested-by: Freddy Paul <freddy.paul@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12590
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently the CBFS mmap cannot be accessed at the beginning of romstage
because it waits until DRAM is initialized. This change first loads CBFS
into SRAM and then switches to using DRAM as the backing once it is
initialized.
BUG=chromium:210230
BRANCH=none
TEST=confirm that the cbfs can be access at the beginning and end of
romstage on different boards.
Change-Id: I9fdaef392349c27ba1c19d4cd07e8ee0ac92dddc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ccaaba266386c7d5cc62de63bdca81a0cc7c4d83
Original-Change-Id: Idabfab99765b52069755e1d1aa61bbee39501796
Original-Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312577
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12586
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We need mmu interfaces in these two stages for,
1. bootblock: to support mmu initialization in bootblock
2. romstage: to be able to add dram range to mmu table
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I56dea5f958a48b875579f546ba17a5dd6eaf159c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf72736bda2233f8e0bdd7a8ca3245f1d941ee86
Original-Change-Id: I1e27c0a0a878f7bc0ff8712bee640ec3fd8dbb8b
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292665
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12585
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The right thing to do is to hide them behind PLATFORM_USES_FSP1_1.
The only things that should depend on HAVE_FSP_BIN is the code
that actually adds the file to CBFS, and the path to the file in Kconfig.
Removing the HAVE_FSP_BIN check requires some default values
for two Kconfig variables.
Change-Id: I9b6c3ed0cdfb0e02421d7b98c488a66e39add947
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12465
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
verstage, romstage, and payload can be added through infrastructure now.
Change-Id: Ib9e612ae35fb8c0230175f5b8bca1b129f366f4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Not all the paths through the _OSC method returned a value. According
to the ACPI spec (5.0 & 6.0), bit 2 needs to be set for an unrecognized
GUID.
Fixes warnings for both platforms:
dsdt.aml 1143: Method(_OSC,4)
Warning 3115 - ^ Not all control paths return a value (_OSC)
dsdt.aml 1143: Method(_OSC,4)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _OSC)
Change-Id: Ibaf27c5244b1242b4fc1de474c371f54f930dcb6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12530
Tested-by: build bot (Jenkins)
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We currently race in SMM init on Atom 230 (and potentially
other CPUs). At least on the 230, this leads to a hang on
RSM, likely because both hyperthreads mess around with
SMBASE and other SMM state variables in parallel without
coordination. The same behaviour occurs with Atom D5xx.
Change it so first APs are spun up and sent to sleep, then
BSP initializes SMM, then every CPU, one after another.
Only do this when SERIALIZE_SMM_INITIALIZATION is set.
Set the flag for Atom CPUs.
Change-Id: I1ae864e37546298ea222e81349c27cf774ed251f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/6311
Tested-by: build bot (Jenkins)
Tested-by: BSI firmware lab <coreboot-labor@bsi.bund.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Does native ram init for Intel Atom D5xx 8086:a000 northbridge
Tested on Intel D510MO mainboard, board boots linux kernel
- Works fully with both dimms populated (2x2GB), memtest passes 100%
- Almost boots with only one dimm in one of the slots
(suspect bad memory map with one dimm?)
- Reads garbage with only one dimm in other slot
Change-Id: Ibd22be2a959045e0a83aae2a3a0e877013f80711
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/12501
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Existence of requested PCI device was not checked when enabling
IDE mode on the SP5100. Fix incorrect PCI device ID and check
for device existence before attempting setup.
Change-Id: I726c355571b5c67c9a13995be2352601c03ab1e4
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12572
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Decision Feedback Equalization (DFE) is a form of dynamic
link training used to lower the overall error rate within
the coherent fabric. Enable it on all capable HT links.
Change-Id: I5e719984ddd723f9e375ff1a9d4fa1ef042cf3eb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12072
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The existing code did not properly detect various link attributes
on Family 10h/15h processors. With the addition of new HT3- and
IOMMU-specific code, proper detection has become critical to avoid
system deadlocks.
Fix and streamline link attribute detection.
Change-Id: If63dd97f070df4aab25a1e1a34df4b1112fff4b1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The existing code re-used the Family 10h XCS buffer setup on
Family 15h CPUs, which set incorrect values leading to random
system lockups.
Use the Family 15h XCS buffer setup shown in the BKDG.
Change-Id: Ie4bc8b3ea6b110bc507beda025de53d828118f55
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12070
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Minor change to be more explicit about the binary state
of the iolink detect variable.
Change-Id: Ifd8f5f1ab28588d100e9e4b1fb0ec2525ad2f552
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12069
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The secondary bus number set code incorrectly overwrote the link
buffer settings in F0x[F4,D4,B4,94]. Constrain the secondary
bus number set to the appropriate bits of the registers.
Change-Id: If70825449f298aa66f7f8b76dbd7367455a6deb1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12068
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Ted Kuo