Remove the code which is passing parameters to ARMTF and move external
buck initilizaton from ARMTF to coreboot.
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: I4f4b30acbee9b42a202b326f2fe4517cb4b9d83c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37bec54b4d8a3bce38878e292e4821da3959026a
Original-Change-Id: Ib81709812a064f6daf13c9b4d6525f1858c81393
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332343
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14123
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enable the SPI controllers on the Quark SoC.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Load the SPI driver stack
* Testing is successful when the time is able to be displayed on a
set of seven-segment displays controlled by a Maxim MAX6950 SPI
display controller.
Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14109
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In order to make this work earlymtrr.c needed to be removed
from intel/truxton/romstage.c. It's not a ROMCC board so
there's no reason to be including .c files.
Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14094
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes
IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get
their logic reset over pltrst and hence configuring PADRSTCFG to
PLTRST to prevent IRQ strom after S3 resume.
BRANCH=glados
BUG=chrome-os-partner:50536
TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed
after S3 resume.
Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68
Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329453
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331174
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The two external USB ports and the internal USB header have overcurrent
protection chips with the low-active overcurrent signal connected to the
chipset.
The power-on default for this register disables the software detection
of overcurrent conditions.
After setting the register Linux correctly shows the overcurrent
condition in the kernel log (tested by shorting the 5v and gnd lines on
J14 / the internal USB header):
[ 2015.229921] usb usb1-port3: over-current condition
[ 2015.449925] usb usb1-port4: over-current condition
Simlar for the external ports:
[ 256.237916] usb usb1-port1: over-current condition
[ 256.458084] usb usb1-port5: over-current condition
Note that each signal is shared between two ports:
usboc0#: External ports (port1/5)
usboc1#: Internal ports (port3/4)
Change-Id: I02d498053b8ec61dc206e74a96c4a1dcfd4fae92
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/14084
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix for the T4xx and T5xx series.
It does not apply to X2xx/X6x series as those have only
one GPU, which is always connected to the display.
The T6x series needs special care not handled with this patch.
Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be
deactivated in case a dedicated GPU is found and active,
leaving the system without a working display.
Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14031
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
BRANCH=none
BUG=chrome-os-partner:49229
BUG=chrome-os-partner:50806
TEST=power on to kernel on Oak Rev3 with 4GB dram
Change-Id: I32fa881df12eb9b7f66086904aebde3dd1483fbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275
Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331811
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14089
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This pin is not used anymore since Rev5.
BRANCH=none
BUG=chrome-os-partner:49375
TEST=make and boot on Rev4/5
Change-Id: I3c775eb2b5e05256523bfd8be814e516944a2f90
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a87e3babe28413bd879a2d95d4612a5b6b541419
Original-Change-Id: I87972ff8961309ecdad03639e1b6fac1da119cd7
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331810
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14087
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i3100 boards in the chipset.
Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13786
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i810 boards in the chipset.
Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13784
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i830 boards in the chipset.
Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13783
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable SDHCI runtime PM since the display flicker due to
SCC Power Gatingis addressed by 0x82 microcode
BRANCH=glados
BUG=chrome-os-partner:44663
TEST=Check if display flicker is gone when SCC is power-gated
Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba
Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3
Original-Signed-off-by: Medha Garima <medha.garima@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329651
Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Original-Tested-by: Jenny Tc <jenny.tc@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331172
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13990
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode
has been updated since v76, and it requires an an extra VR mailbox
command should be sent from coreboot to pcode.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
CQ-DEPEND=CL:329393
Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2
Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329480
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13983
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect
the DRAM size at runtime.
BUG=chrome-os-partner:49427
BRANCH=none
TEST=Boot to kernel
Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223
Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327961
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331176
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Runs the LITTLE core at highest freqency to speed up the boot time.
Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward
compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.)
BRANCH=none
BUG=chrome-os-partner:47422
TEST=flash the bootloader and measure the boottime by cbmem result
Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161
Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324685
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13980
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reset pin of USB Hub is connected to GPIO118, it is low active.
Config GPIO118 as GPO and output high.
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df
Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd
Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321054
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Oak introduces a 1.8V to 3.3V level shifter for EC SPI bus after rev5.
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I71868b003fc71dee0532033299afc155a9fbec9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 030b478fedf046a7b818696779299c591415fcbd
Original-Change-Id: Ibff9705832700867279cb1b39b752b8f5f27cf33
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320026
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13970
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=build pass and boot to oak kernel
Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9
Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9
Original-Signed-off-by: jun.gao <jun.gao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319031
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot to shell on Rev3
Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56
Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303207
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13104
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We define a mechanism to pass board specific parameters to BL31. The
idea is BL31 doesn't need to have the board revision knowledge, it
only needs to process the board specific parameters to initialize and
control specific hardware. In this way, we can support different boards
with same BL31 binary.
BRANCH=none
BUG=none
TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got
different board arguments in ARM TF
Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace
Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292678
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I3ed8bad1bdc7d17e334e0136f92a51c8e7ba4e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e
Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6
Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292692
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13106
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot oak to kernel on rev1
Change-Id: I0773c81398df445aec16bcfcd0c5a8fe5a588b5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae15c42c2f7d9c2a716e5b6098d85e17279f5eae
Original-Change-Id: I65abf810d35ae5e7156cf6f5730117e690183d18
Original-Signed-off-by: mtk05962 <bayi.cheng@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292693
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Use UDELAY_IO selected by CPU_VIA_C7, so no manual inclusion
(or secondary UDELAY implementation) is needed
Change-Id: Ib086a1bfe8ffca5757bf553c5a62a45da7a410b6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13782
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i440BX boards in the chipset.
Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13781
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a port of Auron_Paine based on upstream Auron and the Auron_Paine
code originally from commit bd61dfd in Google branch
firmware-paine-6301.58.B .
Change-Id: I3a1faec3195a81bb3a6496b8bd610fc8a89e66aa
Signed-off-by: Georg Wicherski <gwicherski@gmail.com>
Reviewed-on: https://review.coreboot.org/11907
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Pass memory training information to MemoryInit, so memory
training can be completed.
Change-Id: Icb1bf308b77a1c8481313c259c3f3dd1d8379863
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13870
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Nyan is an old board that was committed before several core code
modernizations to timestamp and CBFS code. Not all of those later
patches were correctly integrated with old boards like this, and the
core code has evolved to a point where it doesn't actually boot anymore.
This patch fixes that issue and brings the Nyan boards more in line with
how later ARM platforms look.
BRANCH=None
BUG=None
TEST=My Blaze boots again.
Change-Id: I3277a2f59ad8ed47063f7f6b556685313b1446f8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a1679e342a7adc2b2371b6e3f69a898a7a5c717
Original-Change-Id: I2a0a2abbd79b4b5f756125dcbb6cbd9441016d4e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328543
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13832
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Include the code to add the WRDD method to the existing
WiFi Device in the mainboard ACPI code.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Compile for the other platforms that are modified.
Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516
Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329296
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13840
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Set the UPD values for MemoryInit.
* Update the FspUpdVpd.h file which specifies the parameters for
MemoryInit.
* Add the necessary values to chip.h to enable values to come from
the mainboard's devicetree.cb file
* Add the parameters to the mainboard's devicetree.cb file
* Locate the platform configuration database file (pdat.bin)
* Copy the data values from the chip_info structure into the UPDs
* Display the UPD values
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful when the UPD data is displayed before the call to
MemoryInit
Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13896
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
UDELAY_IO is defined in src/cpu/x86/Kconfig, so it does
not need to be redefined in the AMD cpu or board Kconfigs.
Change-Id: I6676881c0ba5d1634230fc3d3c37da3afbc6fceb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13780
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On Apollo Lake SPI flash is memory mapped. The mapping is different
to previous platforms. Only "BIOS" region is mapped in contrast to
whole flash. Also, the 128 KiB right below 4 GiB are being decoded by
readonly SRAM. Fail accesses to those regions, rather than returning
false data.
Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13706
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove dependency on early_serial.c and instead use the
Super I/O's header to access the functions needed.
Also re-organize some of the superio code in order
to succesfully compile the rom.
Change-Id: I85a6f1352ae3b91c3c98e4d3fa0b90b87e02babc
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13925
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Turn on the SD controller to allow it to claim resources.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when at the UEFI shell prompt:
* After issuing:
* "connect -r"
* "map -r"
* The "dir" command displays the contents of the SD flash card
* The "drivers" command shows an SD host and SD media connection
Change-Id: I883dc87270045786ddb931bea83fc36646a128e6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13894
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove dependency on early_serial.c and instead use the
Super I/O's header to access the functions needed.
Change-Id: I9edf7fc2501aa832106dda9213e702dbcc1200b4
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13887
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Sandy and Ivy Bridge processors use the same socket, and a mainboard
with the socket can support both types of CPUs. However, they use
different native graphics init code for LVDS and cause a crash if
running the wrong code.
This change detects the CPU type and then selects the right code to
run. It will add some more code in ramstage. It also merges the
{SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS.
Tested on a Lenovo T520 with i7-2630qm and i7-3720qm
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91
Reviewed-on: https://review.coreboot.org/12087
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
Update the DPTF configuration for the chell mainboard:
1) Enable DPTF charger control, set max current to 1975mA
according to the battery specification.
2) Enable charger effect on charger temp sensor in TRT
3) Set PL2 to 15W which is the same value configured in the CPU.
BUG=chrome-os-partner:49859,chrome-os-partner:50306
BRANCH=glados
TEST=build and boot on chell
Change-Id: I644256b9596cc5295513c48f5e3a18e6ce8b0a6b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: c19740a227f932bf80e9243341ec81763779719c
Original-Change-Id: Icff5edc9d659bea6370ff8de1334ebf0983340da
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329187
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13842
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add new GPIOs for touchscreen enable and reset pins and define
the one missing unconnected pin for GPP_E10.
BUG=chrome-os-partner:50518
BRANCH=glados
TEST=build and boot on chell DVT1
Change-Id: I565a742ff266ee65a5d33f052606fe77c24b6ac8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 32a890af8c32aa30adac256d2c4ceaeefa30bd0d
Original-Change-Id: I16546d38cc4e926e169f61ae1843106d1e14936b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329297
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13841
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of relying on power-on-reset values provide configuration
for all pads. PAD_CFG_NC() was used for all pads which had no nets
routed on the board. PAD_CFG_GPO(0) was used for pads which had nets
routed on the board in order to terminate them.
BUG=chrome-os-partner:50301
BRANCH=glados
TEST=Built and booted chell. Suspended and resumed on EVT.
Change-Id: I7960442d5c06f58a1b671cdefac71ef0bc3b0cd5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a167cd0a747402bfc3cc9b6fbaaceceda766ee9
Original-Change-Id: I519011b049235dc2a960939c0bed274252dbffa8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/327835
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13831
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enable the EHCI and OHCI controllers.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when at the UEFI shell prompt:
* After issuing:
* "connect -r"
* "map -r"
* The "dir" command displays the contents of the USB flash drive
* A USB keyboard can issue shell commands
* The "drivers" command shows an EHCI and OHCI connection
Change-Id: Iad9abced98d9b645e8b12fa0845c97260cf62a72
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13857
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Now that the SoC is configuring the UART pads there's no need to
implement bootblock_mainboard_early_init(). Remove it and
bootblock.c.
Change-Id: I2ae7ea38351733e1c9757cde20b79e1d19d0c1e5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13794
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The used Baytrail-M SoC on TCU3 tend to have issues
with DisplayPort if the graphic power gate is not set up
in coreboot. To avoid this error, use the graphic init
code on this board.
Change-Id: I973bbaa7d86c1ede1f2884b3a08ccb31f7d85087
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13774
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Use shared gpio code from common folder.
Remove the now unused bd82x6x/gpio.c.
Needs test on real hardware !
Change-Id: Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13616
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Use shared gpio code from common folder, except for
INTEL_LYNXPOINT_LP, which has it's own gpio code.
Needs test on real hardware !
Change-Id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13615
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable the minimal ACPI tables. Initialize the FADT header and provide
an empty DSDT.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful if:
* Outputs multiple lines of debug serial text
Change-Id: I2e30c8af2994c9f56d9ba4fe6bc35e133b1d2d6b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13759
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Old map does not work on recent qemu. New map puts coreboot to ROM, so
it behave more like most real machines would.
For details on this map see comment in memlayout.ld
Change-Id: If1f3328b511daca32ba93da5a6d44402508b37e9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This builds and produces an image.
The next step is to get a 'halt' instruction into the boot block and then attach with qemu.
I can't get the powerpc64le-linux-gnu-ld.bfd to recognize any output arch but
powerpc. That makes no sense to me.
Change-Id: Ia2a5fe07a1457e7b6974ab1473539c7447d7a449
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13704
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable HSUART1 for debug serial output. Specify the fixed resources in
the UART driver. This keeps debug serial output flowing during the rest
of the device initialization.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Debug serial output stays enabled after BS_DEV_RESOURCES state
Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13730
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Use shared gpio code from common folder.
Bd82x6x's gpio.c and gpio.h is used by other southbridges
as well and will be removed once it is unused.
Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13614
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable PCIe root port 0
Testing on Galileo:
* Add a 802.11 wireless card in the mini-PCIe slot
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* After PCI 00:17.0, memory addresses are assigned to the 802.11
wireless card on PCI 01:00.0 during BS_DEV_RESOURCES state
Change-Id: I68ea25b8e594480fe5146ffad75e293e346e9517
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13723
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add additional lines to the devicetree.cb file to disable the PCI
devices in the Quark SoC.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* Devices show up as disabled in BS_DEV_ENUMERATE state or ramstage
Change-Id: I1edbbcb88cef29ce972ef054c82e37bf07c3761d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Otherwise the image is simply unusable.
Change-Id: I1e2562ba17279d14dc73b05e4f8fa493e06fbcd2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13699
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Having two separate memlayouts is an unnecessary complication.
Contributors need to make sure that their code fits into the vboot one
(with smaller stage sizes) either way, and the Tegras have plenty of
SRAM anyway. Let's just make the vboot layout the default (as it was
done on other SoCs) to keep things easier to maintain. The empty SRAM
holes on non-vboot systems where the verstage and work buffer would've
been won't hurt them.
BRANCH=None
BUG=None
TEST=Ran abuild with and without --chromeos on Foster, Rush, Ryu and
Smaug.
Change-Id: If37228facb4de1459cc720dca10bf03e04eb9930
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13667
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some spaces crept in where there should be tabs.
Change-Id: Ie70469f5a16e8a2d5933ac632d13551b19761064
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13698
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
This makes the test IDs the default, taken from depthcharge
master (board/*/fmap.dts, hwid property).
Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13634
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Those aren't used anymore.
Change-Id: If7baf2d03c47bcc6f69d63a349bbf9d5e749aeac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13685
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This was copied from mrc structure despite them having fields in different
order.
Change-Id: If10ffa3316c5fdc538a6fabf2409512bc8c3e676
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13661
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Early UART driver is for bootblock and romstage. It is supposed to be used
when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits
in bootblock requiered for serial to be set up.
Change-Id: I15520d566f107797e68d618885d4379e73d0fa45
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13677
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
veyron_speedy was deduplicated as sub-board into google/veyron, so the
addition of chromeos.fmd (identical btw) wasn't useful.
Change-Id: Ic4eb6f5fefb0812cae1b9c0475e3a296d7fa65b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13646
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In the same time remove few native gfx options which were improperly set
and only added dead code to the binary.
Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13649
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
This is needed for stout EC init.
Change-Id: I5c73499c17763229840152a473a2d820802ee2f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13535
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
For devices with Chrome EC, state the "board" name(s), so they're built
as part of the image.
A number of EC boards aren't supported in the Chrome EC master branch,
they're brought along but commented out, waiting for a port to master
in the Chrome EC code base.
Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Otherwise it triggers a IASL warning with new IASL.
Change-Id: I090ee18df78ea779137ee6797c55b96ea27e6d27
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13623
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Store (HPBA, HPBA) had no effect. Rename one of HPBA to avoid shadowing.
Change-Id: I54bfa7bcb3e05c28fe8a257825af56527dbf663e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13622
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
PBIF is package and so a scalar can't be stored instead of it.
What was meant is probably Index(PBIF, 0)
Change-Id: Iddd18e1f165e0f48fd91124200aba5c6b4a5b4bd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13621
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it
has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the
VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard
directory and setting the VGA_BIOS_ID in Kconfig.
Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-on: https://review.coreboot.org/13594
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Some of the pins are not connected/used on kunimitsu board,
this patch will make them "Not connected".
Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and
GPIO TX/RX will be disabled.
BRANCH=none
BUG=none
TEST=Build and booted in kunimitsu.
Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488
Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316700
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/13629
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
While the board configuration still works without this,
It's nicer to have the device statically defined since
the NIC is hardwired to the board.
Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13455
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
As the audio card needs 1.8V I2C operation. This patch adds
entry into devicetree.cb to set I2C port 4 operate at 1.8V.
TEST=Built & booted lars board. Verified that I2C
port 4 is operating at 1.8V level
Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c
Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321000
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable the option to back up Vboot non-volatile data from CMOS
to flash as these boards have the necessary nvram fmap region
and are using vboot2 which does not backup to the TPM.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45
Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324123
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13601
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The developer mode gpio switch on rialto is always hardcoded (through a
resistor) as developer mode. We need to ignore it to allow transitions to
verified mode with the virtual developer mode stuff.
TEST=We can now exit dev mode on rialto
Change-Id: I94a949f0973132de5fd008224af79cf612151193
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b
Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325861
Original-Commit-Ready: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13626
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
kunimitisu platform updated these two fields if maxim codec
is detected.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10
Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324631
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13603
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work
around Jenkins failures caused by an unmodified clone.
Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13521
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
henryc.chen