Checked with the schematics that all PCIe clocks have a corresponding
clock enable pin.
BUG=b:149970243
BRANCH=zork
Change-Id: If96cdf95e213682217e46a98fc69c5c2ef4a148d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44892
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the general purpose PCIe clock outputs configurable to be either
permanently enabled, permanently disabled or dynamically enabled via
their corresponding external #CLK_REQx pins in the board's devicetree.
BUG=b:149970243
BRANCH=zork
Change-Id: I3f5760c0b869e8a9416ba9b57d182a88a2eb5e44
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The _SHIFT postfix is a bit clearer than the _SHL one and more in line
with the names used for this kind of defines in coreboot. The
documentation on that register is currently wrong and will hopefully be
fixed in the future; the defines should now match the hardware.
BUG=b:149970243
BRANCH=zork
Change-Id: I977f107d466521484ca13fa1f4dd86a50c8150d7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The code using the macro was found not working after finally enabling
the HDA PCI device on the hermes board.
Fix a typo to generate the correct verbs.
Tested on prodrive/hermes.
Change-Id: I953c2e9fbebc1f02bdf71ce868a95f578300c3a1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44900
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replacing the existing defines with macros makes them easier to use in a
function that applies the setting for a certain GPP/GFX clock output.
Also add macros for statically enabling or disabling the clock outputs
and not only for configuring them as controlled by the #CLK_REQx pins.
BUG=b:149970243
BRANCH=zork
Change-Id: I14198f224639721fe6ca71ca3dcd9cb413a587d5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On Picasso MISC_CLK_CNTL1 doesn't contain OSCOUT[12]_CLK_OUTPUT_ENB and
this was probably just copied over from stoneyridge.
BUG=b:149970243
BRANCH=zork
Change-Id: I32f459026c4e8632672123681b20736245f198b2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44886
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Linux kernel drivers bind to "DMI quirks." In this case, the audio
fw_config is added as an OEM string, e.g., "AUDIO-MAX98357_ALC5682I_I2S"
so the audio topology can be correctly discovered.
But add all successfully probed fw_config items as well, because this
makes it easier to view what is selected from userspace.
BUG=b:161963281
TEST=With CBI FW_CONFIG field set to 0x201:
localhost ~ # dmidecode -t 11
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: DB_USB-USB4_GEN2
String 2: AUDIO-MAX98373_ALC5682I_I2S
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7b7586b0ebfe7b2fd888f448a50ae086364fa718
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a backing cache for all successfully probed fw_config fields that
originated as `probe` statements in the devicetree. This allows recall
of the `struct fw_config` which was probed.
BUG=b:161963281
TEST=tested with follower patch
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I0d014206a4ee6cc7592e12e704a7708652330eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPP_F11 was in the early gpio table, but the definition was missing
from the main gpio_table. This change adds GPP_F11 to the gpio_table
array.
BUG=none
TEST="emerge-volteer coreboot" and verify it builds correctly.
Change-Id: I40f887300a9dfd4f8e790031b77bbee8a014f499
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Add Makefile.inc to include six generic DDR4 SPDs for the following
parts for Eldrid:
DRAM Part Name DRAM ID to assign
H5AN8G6NDJR-XNC 0 (0000)
MT40A512M16TB-062E:J 1 (0001)
H5ANAG6NCMR-XNC 2 (0010)
K4A8G165WC-BCWE 0 (0000)
K4AAG165WA-BCWE 3 (0011)
MT40A1G16KD-062E:E 3 (0011)
Add mem_list_variant.txt as a manifest of eldrid's DRAM parts for use
by gen_spd, the generic DD4 SPD generation tool.
Add dram_id_generated.txt to specify DRAM ID strap settings.
NOTE that Eldrid specified DRAM IDs for the first three parts to be 0
though 2 (i.e. no combined DRAM IDs for parts that use the same SPD).
BUG=b:161772961
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds
without error.
Change-Id: Ica62e299ed40e60c2d5928b29ead5d2205b1af66
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44272
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This SuperIO chip is used on the Intel DQ45EK mainboard. Restore the
driver that was deleted in commit d3a1a4171e ("src/superio: Remove
unused superio chips"). Changes from the previous version include:
- Replacing the early serial implementation with Winbond common code,
- Replacing the license boilerplate with SPDX headers, and
- Removing unnecessary header file references.
Change-Id: I0ff1a63c47d5dff2599c83a1cebe1ac5ff2136b1
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable TBT2 setting in overridetree.cb based on schematic.
BUG=b:165175296, b:166060548
BRANCH=none
TEST=Check all USB ports USB2 and USB3 both functional
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I23ecf76a3c2f631211b0ae2898707c68862b374b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Set tcc offset to 5 degree celsius for kaisa and duffy
BUG=b:166696500
BRANCH=puff
TEST=Build, and verify test result by thermal team.
Change-Id: I2bb977b98c0764f0b9cac3543074da56057717cf
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44901
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MODEM_CLKREQ / CNVI_CLKREQ has no external pull-down resistor.
When there is no M.2 card populated, the pin is floating. Thus
enable an internal 20K PD.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I37e0a9d7e9e0a8c8a7ac198abfd3995b8b0f9e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Add CNVi and PCIe wifi devices to the devicetree and enable the wifi
driver and SMBIOS tables in Kconfig.
Test: both CNVi and PCIe wifi devices work fine
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I16e04dbbf5fc3a163ce5a2bb8de646877d5cbc0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43654
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rework the comments:
- fix wrong gpio / net names
- convert all comments to <gpio> / <net name>
- add more information where appropriate
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I51b552fd3255d5627dcc012e677bad51be517cf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43650
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
INTP_OUT can be used as Type-C VBUS sense input/interrupt but is
currently unused in coreboot. It isn't a requirement for PD to work.
Disable it for now.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I233fbb562969487dff095ba6589fb9da3301ae4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43647
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable internal pull-ups for SATAXPCIE pads since there are external
ones at the M.2 slot's PEDET pins.
Test: both, SATA and NVME devices work fine on both slots
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I6be716620695ac38c44a17abe1c4de97b099b8d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43645
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are pads being unused for various reasons:
a) missing board support (DeepSx: SUSWARN#)
b) unneeded feature ID pins
- currently no known device models without keyboard backlight
- currently no known device models without TPM
c) BOARD_ID (L140CU/L140ZU) is fixed and known at build time
d) DDR_TYPE_*: there is only one known ram model
e) strap-only pads
f) unconnected pads
Configure them as NC with appropriate pull-up if no external pull exists.
The latter was checked by schematics and looking at the board.
When any of the unused ID pins is needed in the future, they can be
reactivated easily (configure as GPI).
Further, convert from use of legacy macro PAD_CFG_NC to PAD_NC.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia370c180d5ae6f48360be14af3cbab29e6814e75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43644
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support CSE Lite firmware update, CSE RW partition is extracted from
CSE blob binary and added to FW_MAIN_A and FW_MAIN_B.
CSE RW size for TGL is close to 2.3MB; hence, the size of FW_MAIN_A and
FW_MAIN_B is increased to avoid an overflow.
BUG=b:140448618
TEST=build with me_rw binary blob for volteer and boot to kernel.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ie3c2b657f0426d206dfe3729829ec34ff57812c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43790
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
L140CU has a TPM2 connected via SPI. Add the TPM device to the
devicetree and enable it.
According to Intel doc#615170-001, PIRQ is required for SPI TPM to work.
Since the TPM is connected to GPP_A7, enable NF1 (PIRQA#) and set it as
TPM interrupt in Kconfig.
Note: The PCH maps either LPC TPM or SPI TPM to the same address and
handles either LPC or SPI communication transparently. Thus we can use
MAINBOARD_HAS_LPC_TPM here, which implements TPM via that address.
Tested, but only polling works currently, because there is some upstream
issue with the tpm_tis module in current Linux kernels. [1]
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1770021
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I26d3b396fe1e99368e18fd3a6a9f02e3585b9f6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43641
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows calling GETSEC[CAPABILITIES] during early init, when the MSR
isn't locked yet.
Change-Id: I2253b5f2c8401c9aed8e32671eef1727363d00cc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This is a security lock and is required for TXT, among other things.
Tested on Asrock B85M Pro4, still boots.
Change-Id: I7b2e8a60ce92cbf523c520be0b365f28413b9624
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44884
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix an issue the assembler didn't warn about to fix a crash on real
hardware. qemu didn't catch this issue either.
The linker uses the same address for variables in BSS if they aren't
initialized in the code. This results in %edx being set to the value
of %eax, which causes an exception restoring IA32_EFER on real
hardware.
Tested on qemu with KVM enabled.
Change-Id: Ie36a88a2a11a6d755f06eff9b119e5b9398c6dec
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
We can now factor out the essentially duplicated ME functions.
We include a .c file to preserve reproducibility. This is needed because
there are two different `mei_base_address` global variables, and we have
to access the same variables in order for builds to be reproducible.
The duplicate global in `me.c` and `me_8.x.c` will be completely gone
once this new `me_common.c` file becomes a standalone compilation unit.
We are wrapping some things in static inline functions, as they won't be
directly accessible anymore after moving to a separate compilation unit.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical.
Change-Id: I057809aa039d70c4b5fa9c24fbd26c8f52aca736
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
This PCI ID is required in order for the CML devices to perform
SSDT generation for DPTF.
CML Processor, EDS, Vol 1,
Table 9-5, Section 9.2.
BUG=b:158986928
BRANCH=puff
TEST=builds
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Change-Id: I94aea6b9e0f60656827daada7b2cc2741604b8b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Andrew McRae <amcrae@google.com>
Add vb2ex_hwcrypto_rsa_verify_digest function for verifying rsa
signature against digest using PSP svc.
This function will be later used by vboot to accelerate rsa
verification.
BUG=b:163710320, b:161205813
TEST=build zork firmware with vboot modification, confirm it's booting
and boot time is reduced by ~230ms.
Change-Id: Ic5c1d13092db5a84191642444f3df9c26925e475
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44456
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SATA is currently turned on in the Dalboz and Trembyle base board
variant devicetrees, even though no Google/Zork device uses SATA; for
mass storage they either use eMMC or NVME PCIe SSDs. This patch disables
both the SATA PCIe device and the bus where it was the only enabled
device on. The next patch in this patch train sets a new FSP-M UPD
setting
BUG=b:162302027
Change-Id: Ie7773d9dcb0518c3e01bdd0af23b62268ab64694
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44068
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FSP has recently added support for a UPD switch to power gate SATA. This
change adds the coreboot side of the feature. To avoid having two SATA
enable options, the value of the sata_enable UPD is determined by the
enable state of the AHCI controller in the platform devicetree.
BUG=b:162302027
BRANCH=zork
TEST=Verify AHCI controller can be hidden/disabled.
Change-Id: I48bf94a7e6249db6079a6e3de7456a536d54a242
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44067
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested on OCP Delta Lake, with FSP WW34 DCI can be connected if enabled.
Change-Id: I8e0dff921cef02dfc66467a2b8fa3e196fb36ac2
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Intel CPX-SP FSP ww34 release added some features:
a. change DDR frequency limit.
b. define MRC debug message verbosity level.
c. enable/disablee of PCH DCI.
In addition, there are some changes to HOB data structures.
Update UPD and HOB header files and adapt soc accordingly.
TESTED=booted on YV3 DVT to target OS command line. Also rebooted okay.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iadbf5dc850c445f988bc7f07a24165abed2298c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44685
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These parts have not been used in any woomax devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=woomax
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611555
TEST=none
Change-Id: I651539c2df8e6d817582573d45b9e77156ece7d4
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These parts have not been used in any berknip devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=berknip
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611704
TEST=none
Change-Id: I9020fc9cbbb4a97664b0c969dd841c5696a4d60f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44871
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These parts have not been used in any dirinboz devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=dirinboz
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611271
TEST=none
Change-Id: I605550d44ba57d979df1bd5bef114f8ecc94fa3a
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44846
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch all zork boards to use generated generic SPDs from spd_tools.
HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was
removed.
picasso/Makefile.inc was updated to populate the 2nd APCB channel based
on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd
entires with _x1/_x2.
Command to generate files:
$ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do
n=$(basename ${b});
if [ "${n}" = "baseboard" ]; then
continue
fi
go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \
src/mainboard/google/zork/variants/${n}/spd \
src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt
done
BUG=b:162939176
TEST=Boot ezkinil and dalboz check dmidecod -t17
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add mem_list_variant.txt, a list of memory parts used by elemi SKUs.
Add dram_id.generated.txt, a list of dram id's to use for each memory part.
Add Makefile.inc, to specify DDR4 and build the SPD file list.
BUG=b:165461530
TEST=none
Change-Id: I6dbcccf577161cc0c787775e2ac03e0c7039baef
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44650
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add memory parts needed by zork boards. Attributes are derived from data
sheets.
BUG=b:162939176
TEST=Compared generated SPDs with data sheets and checked in SPDs
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I67f205f9af24bbc5c12656be1f363a15fe975955
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44447
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If a memory part is a x16 part that has two dies and only a single
rank, then the x16 describes the part width (since this solution will
need to be a stacked solution) and as such, we must translate the
DeviceBusWidth to the "die bus width" instead.
Change DeviceBusWidth variable name to PackageBusWidth to be more
descriptive
BUG=b:166645306, b:160157545
TEST=run gen_spd and verify that spds for parts matching description
above changed appropriately.
Change-Id: Ia6f3ca109d344b7a015da28125a94ce10d2bdfb8
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The TS_DONE_LOADING timestamp description had "(ignore for x86)", but
the implementation in vboot_logic.c will read every bytes, so the
timestamp is correct even for devices with memory mapped boot device
(e.g., x86).
To prevent confusion we should remove the 'ignore for x86' message.
BUG=None
TEST=make -j
BRANCH=None
Change-Id: I01d11dd3dd0e65f3a17adf9a472175752c2b62bc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I noticed that re-running the lpddr4x SPD parts id tool that generates
the variants/VARIANT_NAME/memory/Makefile.inc changed the SPD that is
used for the H9HCNNNCPMMLXR-NEE part.
$ go run ./util/spd_tools/lp4x/gen_part_id.go \
src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/delbin/memory
src/mainboard/google/volteer/variants/delbin/memory/mem_list_variant.txt
Based on the currently checked in generic SPDs for LPDDR4x, this
operation changes the Makefile.inc to use lp4x-spd-3.hex for the
H9HCNNNCPMMLXR-NEE part instead of lp4x-spd-2.hex.
This change updates that discrepancy in Delbin's memory Makefile.inc.
BUG=none
TEST=none
Change-Id: I9a19ab7b1bcdc3814fdd9c462ca2f590c8ed2935
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44785
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a SPI-NOR flash controller which supports pio mode.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I1e38672a532dd8234b3ef24c84113888c8795810
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex).
BUG=b:160157545
TEST=run gen_part_id for volteer variants and verify that it changed
spd names to prepend the "lp4x-" to the filename..
Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that generic SPD files have the memory type prepended to the
filename, they can be stored in the same location. This CL moves
the generic SPDs to the new location.
Change the ddr4 gen_part_id.go and gen_spd.go tools to use
"ddr4_spd_manifest.generated" instead of "spd_manifest.generated".
Change the lpddr4x gen_part_id.go and gen_spd.go tools to use
"lp4x_spd_manifest.generated" instead of "spd_manifest.generated".
Move TGL DDR4 and LPDDR4x generic SPDs into a common location.
Move JSL DDR4 and LPDDR4x generic SPDs into a common location.
Change the volteer/spd/Makefile.inc to use the new path for the spds.
Change the dedede/spd/Makefile.inc to use the new path for the spds.
BUG=b:165854055
TEST="emerge-volteer coreboot" and verify all variants build correctly.
Change-Id: I83b088cb718d15ffd3012c84a12b5231ae84a3e4
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44648
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It seems that GCC's LTO doesn't like the way we implement
DECLARE_OPTIONAL_REGION(). This patch changes it so that rather than
having a normal DECLARE_REGION() in <symbols.h> and then an extra
DECLARE_OPTIONAL_REGION() in the C file using it, you just say
DECLARE_OPTIONAL_REGION() directly in <symbols.h> (in place and instead
of the usual DECLARE_REGION()). This basically looks the same way in the
resulting object file but somehow LTO seems to like it better.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I6096207b311d70c8e9956cd9406bec45be04a4a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Enable IPU for Volteer and Volteer2 variants for MIPI camera.
BUG=165340186
BRANCH=None
TEST=IPU is enabled and shows in lspci.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I66d60474e16c7a9aa8006d42b22510c1495dbd84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44628
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set psyspl2 to 97% of adapter rating, based on our experiment results.
BUG=b:160676773
TEST=Built and check firmware log.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4b621a8cc1749ee52a9f16a7ad2ae7a7aa0f7a5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
DRIVERS_WIFI_GENERIC is a dependency for these SAR settings.
However, coreboot.org builders are not failing, but chromium
builders are only for serial configurations. It's not clear as
to why. Either way correct this.
BUG=b:159304570
Change-Id: I978b622a3a5a2490b0e3aaa14c24807d5afdff9a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44825
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The gpio_common.h needs EINT_BASE from addressmap.h.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I20834e38343410526da0a489fed907acbf479d02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Most of the code is generated using autoport.
Working:
* booting Arch Linux from SeaBIOS
* PCIe/SATA/USB ports (see overridetree and early_init for lists)
* LVDS, DisplayPort, VGA, 3.5 mm jacks, RJ-45
* keyboard, touchpad
* C-States, S3 suspend
Not working:
* rfkill hotkey
* color of the mute hotkey
* sleep f-key
Untested:
* internal speakers and microphone (defective on my machine)
* FireWire
* docking station
* TPM (SeaBIOS detects it, no further test done)
Signed-off-by: Pablo Stebler <pablo@stebler.xyz>
Change-Id: I916583fad375f16e5b02388cbcad2e8a993e042f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Rename the pch_init function to bootblock_pch_init and romstage_pch_init
according to the stage it is defined in.
TEST=successfully built and booted TGLRVP
Signed-off-by: Alexey Buyanov <alexey.buyanov@intel.com>
Change-Id: Ib7450fcdc3024dfb5e375a54f9bdcdca9bc373d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Returning a const uint32_t doesn't do anything, and it conflicts with the
declaration of sku_id() in include/boardid.h.
Change-Id: I2719e5782c9977f8ca4ce8f1dd781f092aa73d64
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1428708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44746
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Follow HW schematic to correct DDSP_HPD1/2/3 and USB_OC3 pin.
BUG=b:165175296
BRANCH=none
TEST=Check all USB ports USB2 and USB3 both functional
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I2f941141d761b1b69bc8f9ef0b0c4516062fec4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Removing entry covering root region leads to situation where
num_entries counter is set to 0. This counter is further decremented
in function obtaining address to last entry (see root_last_entry()).
Such negative number may be further used as an index to the table.
Current implementation may lead to crash, when user removes last entry
with imd_entry_remove() and then calls for example imd_entry_add().
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I6ff54cce55bf10c82a5093f47c7f788fd7c12d3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
One of the checks inside imdr_recover() was written with the
assumption that imdr limit is always aligned to LIMIT_ALIGN. This is
true only for large allocations, thus may fail for small regions.
It's not necessary to check if root_pointer is under the limit, since
this is implicitly verified by imdr_get_root_pointer().
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I25d6291301797d10c6a267b5f6e56ac38b995b7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Previously it was allowed to create an imd_entry with size 0, however
algorithm sets the offset of such entry to the exact same address as
the last registered entry.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Ifa2cdc887381fb0d268e2c199e868b038aafff5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Add a check that root_size provided by the caller accounts for one
imd_entry necessary for covering imd_root region. Without this, we
may end up with writing on unallocated memory.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I0a39d56f7a2a6fa026d259c5b5b78def4f115095
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Get rid of the second check whether r is NULL (this is already done by imdr_has_entry()).
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: Ibee1664ee45b29d36e2eaaa7dff4c7cc1942010b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Remove the repetition from the comment.
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: Ibe6e38636b96b6d8af702b05a822995fd576b2fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44662
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Includes changes related to GPIO pad to configure I2C4 required for UFC
Change-Id: Ica3ac31f10214b8aff3bb64a2c3b42ccfa28bdcd
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
This unlocks 1866 MHz frequency for AMD boards of f15tn family.
Tested on ASUS A88XM-E with A10-6700 and Crucial BLT8G3D1869DT1TX0.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I547d7e9ca89524d66ee0ee307de41699d991f9fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40490
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 81066b7ce7.
Reason for revert: The hang observed when not exposing the reset GPIOs was root caused to zork sharing the same I2C bus between touchscreen and touchpad and interleaving of messages during probe which resulted in incorrect information returned back by touchscreen firmware. Exposing the reset GPIO changed the timing of probe and hence helped workaround the hang issue. The touchscreen driver is now fixed to perform I2C transactions in a single transfer and so the hang is no longer observed when reset GPIO isn't exposed.
BUG=b:162596241
BRANCH=zork
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ica11c33d542dd2324bb0b8905c5de06047cee301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This will ensure that the cold reset is performed when CSE Lite jumps
from RO to RW.
BUG=b:162977697
TEST=Verify CSE reset is cold (sits in S5 for PCH Min Slp Duration time)
Change-Id: Ib1173e219ba46ee3275824220c8cf790b1d497fa
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Serial Presence Detect (SPD) data for memory modules is used by Memory
Reference Code (MRC) for training the memory. This SPD data is
typically obtained from part vendors but has to be massaged to format
it correctly as per JEDEC and MRC expectations. There have been
numerous times in the past where the SPD data used is not always
correct.
In order to reduce the manual effort of creating SPDs and generating
DRAM IDs, this change adds tools for generating SPD files for DDR4
memory used in memory down configurations on Intel Tiger Lake (TGL)
based platforms. These tools generate SPDs following JESD79-4C and
Jedec "4.1.2.L-5 R29 v103" specification.
Two tools are provided:
* gen_spd.go: Generates de-duplicated SPD files using a global memory
part list provided by the mainboard in JSON format. Additionally,
generates a SPD manifest file (in CSV format) with information about
what memory part from the global list uses which of the generated
SPD files.
* gen_part_id.go: Allocates DRAM strap IDs for different DDR4
memory parts used by the board. Takes as input list of memory parts
used by the board (with one memory part on each line) and the SPD
manifest file generated by gen_spd.go. Generates Makefile.inc for
integrating the generated SPD files in the coreboot build.
BUG=b:160157545
Change-Id: I263f936b332520753a6791c8d892fc148cb6f103
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If there's already been an error and PSP_verstage is booting to RO,
don't reset the system. It may be that the error is fatal, but if the
system is stuck, don't intentionally force it into a reboot loop.
BUG=None
TEST=Force an error, still boots to RO instead of going into a boot loop
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ibb6794fefe9d482850ca31b1d3b0d145fcd8bb8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Jasper Lake does not have any use case for multiphase SI init so
Disable it.
BUG=b:162184827
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: chrome-internal:3221772
Change-Id: I2d591b46c403e68ff0b41ac8f87c742ae774111e
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
We hit a similar issue on Cereme, so I checked the trembyle base board
which also uses AUX4/HDP4 for the last DDI port, so using AUX3/HDP3 is
wrong there.
Change-Id: I99f9426969488cc5c5a14bd432b38bfd69ae7ef0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Instead of halting if the vboot workbuf is not passed to coreboot by the
PSP, reset and reboot into recovery mode.
This process is made more difficult because if the workbuf isn't
available, we can't reboot directly into recovery - the workbuf is
needed for that process to be done through the regular calls, and we
don't want to go around the vboot API and just write into VBNV directly.
To overcome this, we set a CMOS flag, and reset the system.
PSP_verstage checks for this flag so it will update VBNV and reset the
system after generating the workbuf.
BUG=b:152638343
TEST=Simulate the workbuf not being present and verify the reboot
process.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I049db956a5209904b274747be28ff226ce542316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We need to pull update_mrc_cache into mrc_cache_stash_data, so moving
to end of the file to make sure update_mrc_cache is defined before.
BUG=b:150502246
BRANCH=None
TEST=Testing on a nami (x86) device:
reboot from ec console. Make sure memory training happens.
reboot from ec console. Make sure that we don't do training again.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I9e14fec96e9dabceafc2f6f5663fc6f1023f0395
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Create two new functions to fetch mrc_cache data (replacing
mrc_cache_get_current):
- mrc_cache_load_current: fetches the mrc_cache data and drops it into
the given buffer. This is useful for ARM platforms where the mmap
operation is very expensive.
- mrc_cache_mmap_leak: fetch the mrc_cache data and puts it into a
given buffer. This is useful for platforms where the mmap operation
is a no-op (like x86 platforms). As the name mentions, we are not
freeing the memory that we allocated with the mmap, so it is the
caller's responsibility to do so.
Additionally, we are replacing mrc_cache_latest with
mrc_cache_get_latest_slot_info, which does not check the validity of
the data when retrieving the current mrc_cache slot. This allows the
caller some flexibility in deciding where they want the mrc_cache data
stored (either in an mmaped region or at a given address).
BUG=b:150502246
BRANCH=None
TEST=Testing on a nami (x86) device:
reboot from ec console. Make sure memory training happens.
reboot from ec console. Make sure that we don't do training again.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I259dd4f550719d821bbafa2d445cbae6ea22e988
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44006
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
update telemetry value with the SDLE test result.
BUG=b:158964769
BRANCH=none
TEST=emerge-zork coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic419ca5ca00e4e8602dbc12212a8a63ed3657e02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Move interrupt status and wake status clearing to after GPIO config so
that configuration does not incorrectly set interrupt or wake status.
i.e. when PULL_UP is configured on a pad, it incorrectly sets in the
interrupt status bit. Thus, the interrupt status bit must be cleared
after initial pad configuration is complete.
BUG=b:164892883, b:165342107
TEST=None
BRANCH=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: If4a5db4bfa6a2ee9827f38e9595f487a4dcfac2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Each variant WiFi SAR CBFS will be added with the default name
"wifi_sar_defaults.hex".
so we just need to look up the default CBFS file as the WiFi SAR
source.
BUG=b:159304570
BRANCH=zork
TEST=1. cros-workon-zork start coreboot-private-files-zork
2. emerge-zork chromeos-config coreboot-private-files-zork \
coreboot chromeos-bootimage
Change-Id: Idf859c7bdeb1f41b5144663ba1762e560dcfc789
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44672
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasper Lake SoC had PCI root port mapping swap, thats why we were
using swapped mapping earlier for all the boards
Recently, patch was pushed to handle this swap in PCI enumeration code
for Jasper Lake and we need to correct this mapping. Now this mapping
aligns with actual port mapping in the schematics
BUG=None
BRANCH=None
TEST=NVMe and WLAN are getting detected after this changes
Change-Id: Ide5f8419a15f559cefeb6039f155fabf97c279f8
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
pmc_set_acpi_mode will set EC SMI mask to 1 in the end.
However google_chromeec_events_init will clear EC SMI mask.
If google_chromeec_events_init is ran after pmc_set_acpi_mode, the EC SMI mask
will be 0 in depthcharge and causes lidclose function not working.
So, pmc_set_acpi_mode() should run after google_chromeec_events_init.
This code is mainly from CB:42677
BUG=b:16338215
TEST=Close lid in depthcharge and the dut can be shutdown on waddledoo.
Signed-off-by: Kane Chen <kane.chen@intel.com>
Change-Id: I0f06e8b5da00eb05a34a6ce1de6d713005211c08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Configure gpio settings for FPMCU on Halvor.
BUG=b:153680359
TEST=After flash FP MCU FW, during bootup we see spi id spi-PRP0001:01 in dmesg.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5503cfe0fb9933e98ed01afeef8cad1345593ac6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44575
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Halvor uses TBT 0/1/2 for USB type C. We doesn't use PCIE/USB3 port
therefore disable PCIE/USB3 ports and enable TBT 2.
Follow volteer to set USB2 OC_SKIP.
BUG=b:165175296
BRANCH=none
TEST=Check all USB ports USB2 and USB3 both functional
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifb844ce475f3d58f0c95be0f172fc49edb4cd5fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Create areas for console & timestamp data in psp_verstage and pass it to
the x86 to save for use later.
BUG=b:159220781
TEST=Build & Boot trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I41c8d7a1565e761187e941d7d6021805a9744d06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
- FSP enables IPU (Imaging Processing Unit) by default even if its
disabled in devicetree. We need to fill FSP upd based on the device
enablement in devicetree.
- Enable Vtd IPU and IGD settings only if respective IPs are enabled.
BUG=165340186
BRANCH=None
TEST=IPU is disabled and doesn't show in lspci.
Change-Id: Ieff57fb0ebc8522546d6b34da6ca2f2f845bf61d
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44627
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Reviewed-by: John Zhao <john.zhao@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPP_D16 is routed to the main power enable pin on several PCIe SD card
controllers on SD daughterboards. We should enable the power to these
chips as early as possible so they can participate in PCIe
enumeration.
BUG=b:162722965
TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and
can read SD cards.
Change-Id: Icf5e770f540e5d1e27b40f270bb004f4196bc7be
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
JSL FSP support FSP 2.2. FSP 2.2 introduces Multiphase SI init
support through the FSP-S arch UPD. The FSP-S arch UPD structure
is added in edk2 stable 2020 branch. Switching the support for
JSL to edk2-stable202005 to intercept the FSP2.2 related support.
BUG=b:162184827
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: chrome-internal:3221772
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: Ieed1b58e491d5a89043c418f0f44f2ee9af111f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44576
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move a size of DDR3 SPD memory (always 256 bytes) to a common define.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I80c89ff6e44526e1d75b0e933b21801ed17c98c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Introduce FSPT_ARCH_UPD and FSPS_ARCH_UPD to support debug events
and multi-phase silicon initialization.
For backward compatibility the original structures are kept and
new ARCH_UPD structures will be included only when UPD header
revision equal or greater than 2.
ref:
- https://bugzilla.tianocore.org/show_bug.cgi?id=2781
BUG=b:162184827
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: chrome-internal:3221772
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I728aff1df3d361e21e4617647c4ec0e2d345a8c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Add charger input current throttling for drawcia system
BUG=None
BRANCH=None
TEST=Built and tested on drawcia system
Change-Id: I34fdc23fcd84b5c27c2bada769f7a9049c2a56a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This field eventually gets interpreted as MT/s by SMBIOS instead of MHz. Translate from Mhz to MT/s by multiplying by 2.
BUG=b:154654737
TEST=dmidecode -t 17 matches expected speed
Change-Id: I51b58cb0380f2a2bf000347395ac918ac0717060
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add downgrade support for CSE RW firmware.
When CSE FW is downgraded, CSE may get into data compatibility issues.
To avoid such issues, coreboot sends DATA CLEAR HECI command to CSE to
clear CSE run time data on proactive basis during a downgrade and
when CSE indicates a data mismatch error through GET_BOOT_PARTITION_INFO.
BUG=b:144894771
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I0a3a3036e448e5a743398f6b27e8e62965dbff3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40561
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix compilation under x86_64.
Tested on HP Z220:
* Still boots on x86_32.
Change-Id: I2a3ac3e44a77792eabb6843673fc6d2e14fda846
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The code can only be compiled as x86_32. Mark it as such to fix errors
in the x86_64 assembler. The caller has to make sure to call this code
in protected mode only.
Tested on HP Z220:
* Still boots on x86_32.
Change-Id: I4c0221fb3886b586c22fe05e36109fcdc20b7eed
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Enter long mode on secondary APs.
Tested on Lenovo T410 with additional x86_64 patches.
Tested on HP Z220 with additional x86_64 patches.
Still boots on x86_32.
Change-Id: I916dd8482d56c7509af9ad0d3b9c28bdc48fd0b1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The zork devices use the ACP (audio co-processor) and the I2S interface
for audio and not the HDA (HD audio) device and interface.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=Equivalent change on Mandolin disabled the non-GPU HDA device with
the corresponding FSP change applied.
Change-Id: I6c7de881cff8398fe416151fab219142d4fc904a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP has recently added support for a UPD switch to disable the non-GPU
HD Audio controller. This change adds the coreboot side of the feature.
To avoid having two HD Audio enable options, the value of the
hd_audio_enable UPD is determined by the enable state of the non-GPU HD
Audio controller in the platform devicetree.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=With the corresponding FSP change applied the non-GPU HD Audio
device is hidden when switched off in devicetree and remains present and
functional when switched on in devicetree.
Change-Id: Ib2965e0742f4148e42a44ddad8ee05f0c4c7237e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44680
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 65605276a4.
This patch shouldn't have been merged yet, since the issues on the FSP
side aren't sorted out yet, so the FSP-side changes haven't landed yet.
This byte will be used for an audio-related setting instead to have the
audio settings grouped together.
BRANCH=zork
Change-Id: If79900f3a92fd949d7653001e1ca2faac7061e3c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44678
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since Puff uses CSE Lite SKU that supports in-field CSME
updates an additional reset is triggered when jmp from RO
to RW during boot. However this reset is not detected by
the cr50 running older firmware because the strapping
configuration for EFS2 uses PLT_RST_L to assert to cr50
that a AP reset occured. The older cr50 firmware
version of 0.0.22 only monitors AP resets via SYS_RESET_L
and hence never detects the reset.
To mitigate the issue above a modified reset sequence is
required to be performed to signal the reset occured and
hence a board-specific cse_board_reset() strong symbol is
provided to modify the flow accordingly.
V.2: Select CHROMEOS_CSE_BOARD_RESET_OVERRIDE common
implementation instead of a local variant in mainboard.c
BUG=b:162290856
BRANCH=puff
TEST=none
Change-Id: I27ab9711aedf92b5af7a58f3b5472ce79f78c8fa
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44454
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will ensure that the cold reset is performed when CSE Lite jumps
from RO to RW.
BUG=b:162386991
TEST=Ensure that Drawcia board boots to OS. Ensure that global reset is
triggered when cr50 is running firmware versions newer than 0.0.22. On
cr50 versions 0.0.22 or older, EC triggers cold reset of AP.
Change-Id: I46a390c71e380328cd7fe70214df09553b2db75c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When CSE Lite jumps from RO to RW, certain boards need to request
Embedded Controller (EC) to trigger cold reset of SoC. This change
introduces a helper to override the default global reset.
BUG=None
TEST=Ensure that Drawcia board boots to OS. Ensure that global reset is
triggered when cr50 is running firmware versions newer than 0.0.22. On
cr50 versions 0.0.22 or older, EC triggers cold reset of AP.
Change-Id: I8078e2436d1d58a650bf7b0cf38b5bb89a474187
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Introduce a helper to get the cached cr50 firmware version. This
information is in turn used to identify the strap configuration
supported by Cr50.
BUG=None
TEST=Ensure that Drawcia board boots to OS. Ensure that the version
cached cr50 firmware version is returned.
Change-Id: Id84b152993f253878a6c133cc433a0da2c990cf2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44653
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make GPIO_4 and GPIO_5 PAD_NC in ezkinil/gpio.c. None of the Ezkinil SKUs
use internal stylus and hence pen pads are configured as NC.
BUG=b:164892883, b:165342107
TEST=Verified taht pen detect GPIO does not cause spurious wakes.
BRANCH=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I7557575cf8b8e0f849e05bda1d69acf61e91a157
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44629
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the IT8728F datasheet it is possible to add an extra delay
between 3VSBSW# being set and PWRGD3 being set during resume from
Suspend-to-RAM. This is enabled in the special function selection
register, the default being 0.
This is also useful for the IT8720F although this chip does not have the
PWRGD3 output. On the corresponding pin it has PWROK2, which the setting
then seems to apply to.
The datasheet for the IT8720F marks the corresponding bit as reserved,
but the vendor BIOS of an Acer Aspire M3800 sets it anyway. Without
setting the bit, coreboot fails to resume from S3. Oscilloscope
measurements have shown that setting the bit increases the delay between
3VSBSW# being set and PWROK2 being set from around 1 us to 140 ms. The
actual use of PWROK2 on the board design is unclear - the only
destination it seems to reach is a pin header near the SuperIO marked as
"GPIO1".
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: I51cbf2470dc2b840a647a20090acb5a0cf4f4025
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The assumption was that the fmap cache would be initialized in
bootblock, otherwise an error is shown. This error is showing
up in psp_verstage when the fmap cache is initialized there, so
create a new ENV value for ENV_INITIAL_STAGE.
BUG=None
TEST=Boot, see that error message is gone from psp_verstage
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I142f2092ade7b4327780d423d121728bfbdab247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43488
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When booting from the RO region of a VBOOT enabled ROM, there shouldn't
be a reliance on anything outside of the RO section. This includes the
APOB_NV region (similar to the MRC cache region). By skipping the
region when setting up the BIOS Directory table, the PSP won't try to
use the region when booting.
The APOB_NV region is still used for the VBOOT RW sections.
BUG=b:158363448
TEST=Build RO with no APOB_NV region. Dump the BDT and verify that
it's not in RO, but is in RW_A & RW_B. Boot into recovery.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I13c35ba8a2331492744d2acf257db15e4a53102a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Utilize the SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF option to provide
full range backlight settings to the kernel.
BUG=b:163583825
Change-Id: I3c337fad38e668488800f4d6bc583a82a93659d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
