Trustzone needs to be initialized/disabled both on boot and on wake, so it
needs to be done before ramstage which doesn't run on wake. cpu.c isn't
compiled into romstage and fixing that causes other problems, so the trustzone
functions were split out.
Change-Id: I8fc630237ebec1f02a91600f8baf3d4e9ea66d0e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/169817
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 055ed0e28476123b0bd666109af90baf40aadcee)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch adds support for the DesignWare3 USB 3.0 DRD controller and
PHY to the Exynos5250 and Exynos5420 CPUs. It also adds code to the
Google Snow and Pit boards to turn these controllers on where
applicable.
Change-Id: Idcca627363a69f1d65402e1acb9a62b439f077ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169452
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit e9809ae12ef8b8bd6cd61d3f604cb9e4718cf7eb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6642
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Use tab between "COREBOOT", and comment.
This fix was requested in 90957f88 -
"mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000"
Change-Id: If9fb6158cca95341ab57db1125e85648b616b72c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6601
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This header has nothing to do with cache-as-ram. Therefore, 'car'
is the wrong term to use. It is about providing a prototype for
*romstage*.
Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6661
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A recent change to support early firmware selection on ARM broke snow and was
incompletely implemented on pit. This change fixes snow by applying
the remaining part of the change that had been applied to pit,
and also hooks up real values in the get_write_protect_state function.
Change-Id: Ifef7ad1bf399f79353daec3dd46973f2b2022e37
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/169120
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 841773e048cd9cfbb64782059c24e29c467f17c8)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6635
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When passing '-ffreestanding' the 'main' romstage.c may no longer
necessarily be considered the entry point.
From the C specification in 5.1.2.1 Freestanding environment;
"In a freestanding environment (in which C program execution may take
place without any benefit of an operating system), the name and type of
the function called at program startup are implementation-defined."
Clang complains about these being missing as Clang is somewhat more
strict about the spec than GNU/GCC is. An advantage here is that a
different entry-point type-signature shall now be warned about at
compile time.
Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5872
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
All this samsung_get_base_address_of_device_with_a_really_long_name()
boilerplate makes my eyes bleed... I think there are so much cleaner
ways to do this. Unfortunately changing this ends up touching nearly
every Exynos5 file, but I hope you agree that it's worth it (and the
sooner we get it over with, the better... I can't bring myself to make
another device fit into that ugly scheme).
This also removes the redundant EXYNOS5 base address definitions from
the 5420 directory when there are EXYNOS5420 ones, to avoid complete
confusion. The new scheme tries to use EXYNOS5 for base addresses and
exynos5 for types that are common between the two processors, and
EXYNOS5420/exynos5420 for things that have changes (although I probably
didn't catch all differences).
Change-Id: I87e58434490ed55a9bbe743af1f9bf2520dec13f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167579
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 66c87693352c248eec029c1ce83fb295059e6b5b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6632
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
For now using the same gma.c and i915io.c files as for slippy
Change-Id: Ieb09d0152d525aa090eeb86ebfa253d450d22820
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64373
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 3e119c7e22cb82677754413e56a125f4a372ad54)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6603
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
A large portion of documented registers have been initialized using macros. Only a few
undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant
calls. However, some more work is required to correctly identify which calls are not required.
All the io_writes are replaced by gtt_writes.
Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66204
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6600
Tested-by: build bot (Jenkins)
This patch renames the x86 way of doing things to
explicitly mention CMOS (which is not available on
our ARM platforms) and adds an implementation to
get VBNV through the Chrome EC. We might want to
refine this further in the future to allow VBNV
in the EC even on x86 platforms. Will be fixed when
that appears. Also, not all ARM platforms running
ChromeOS might use the Google EC in the future, in
which case this code will need additional work.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ice09d0e277dbb131f9ad763e762e8877007db901
Reviewed-on: https://chromium-review.googlesource.com/167540
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 8df6cdbcacb082af88c069ef8b542b44ff21d97a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6616
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch adds a mechanism to set aside a region of cache-coherent
(i.e. usually uncached) virtual memory, which can be used to communicate
with DMA devices without automatic cache snooping (common on ARM)
without the need of explicit flush/invalidation instructions in the
driver code.
This works by setting aside said region in the (board-specific) page
table setup, as exemplary done in this patch for the Snow and Pit
boards. It uses a new mechanism for adding board-specific Coreboot table
entries to describe this region in an entry with the LB_DMA tag.
Libpayload's memory allocator is enhanced to be able to operate on
distinct types/regions of memory. It provides dma_malloc() and
dma_memalign() functions for use in drivers, which by default just
operate on the same heap as their traditional counterparts. However, if
the Coreboot table parsing code finds a CB_DMA section, further requests
through the dma_xxx() functions will return memory from the region
described therein instead.
Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167155
(cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This cleans up a few minor things (mostly #defines) of the memory code
for exynos5420, pit, and kirby. Specifically:
- CONCONTROL.empty is read-only, so don't try to set it and also
get rid of the unneeded DMC_CONCONTROL_EMPTY_ENABLE #define.
- MEMBASECONFIG* overlaps members of the mem_timings struct and
are mainboard-dependent anyway, so get rid of 'em.
- DMC_MEMCONTROL_TP_DISABLE corresponds to a reserved bit. It may
have been deprecated.
- Same with TIMING* #defines.
- Clarify DDR_MODE_* usage and use mem->mem_type when appropriate.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ideb21efcc97b24f7e115e90051c20daef4480f17
Reviewed-on: https://chromium-review.googlesource.com/167500
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 650dba32cb217414c422907398f68e784e5720e8)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6614
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
membaseconfig0/1 are utterly dependent on the mainboard's particular
DRAM setup. This defines their values in the mem_timings struct for
pit.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ifd782d1229b2418f8ddbf0bcb3f45cc828ac34b0
Reviewed-on: https://chromium-review.googlesource.com/167488
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 80eebd5bc0dbb9fabf81f46c25dcd5c5d5747579)
exynos5420: necessary updates for DRAM
This updates DRAM usage for Exynos5420 so that we can actually
use 3.5GB:
- Memory chips used with Exynos5420 may have 16 row address lines.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I86d1a96d0d1a028587f7655f8de5a2e52165e9d2
Reviewed-on: https://chromium-review.googlesource.com/167489
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 04bbaf5d8e125166dd689f656d5b37776be01fb1)
Squashed two related commits.
Change-Id: I4e45bc8a446715897ec21b0160701152fa6b226b
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6613
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This changes the number of chip selects that we configure from 2 to 1.
On current setups with (x16 memory 4Gbit chips) that means that we're
at 2GByte.
Technically we should add a second setting in the ares_ddr3_timings
and select between the two of the based on board strappings. That
would make the CONFIG_RUN_TIME_BANK_NUMBER work properly. I've
changed the ddr3_mem_ctrl_init() so it should handle that, but I'm not
actually doing the board strapping read right now.
This change means that accesses to 0xA0000000 - 0xFFFFFFFF on 2G
systems will no longer put the system in a messed up state (leading to
a hang). It also prevents some of the weird boot behavior that we've
seen that comes and goes depending on U-Boot alignment. See
<http://crosbug.com/p/20577>.
This patch was ported from: https://gerrit.chromium.org/gerrit/66117
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4cfe420aac30bd817438f06d01e8671afc4a27d
Reviewed-on: https://chromium-review.googlesource.com/167210
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 0ea574243058068702e3f6bc7355098745d16880)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6612
Tested-by: build bot (Jenkins)
Fine tuning DDR timings value for better stability
* Changed Data Driver Strength from 34 ohms to 30 ohms, expected to
enhance signal integrity.
* Changed DQ signal from 0xf to 0x1f000f, to keep default value safe.
* Changed mrs[2] and added new mrs direct command for setting WL/RL
without resetting DLL.
* Added explicit reset value write in phy_con0 instead of just setting
a bit, to ensure that reset happens.
* Added DREX automatic control for ctrl_pd in none read memory state.
This is ported from: https://gerrit.chromium.org/gerrit/61405
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I59e96e6dede7b49c6572548aca664d82ad110bb1
Reviewed-on: https://chromium-review.googlesource.com/66995
Reviewed-by: ron minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ec34b711c6d270672c56d45c370ca14c0aa27ca3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6611
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch moves around some of the existing Exynos5 USB 2.0 PHY code
to make it cleaner in preparation of the 3.0 PHYs. It moves the VBUS
GPIOs (which are completely board-specific) into the mainboard code and
makes sure to only initialize PHYs on the boards that actually need
them. It also removes the USB 3.0 PLL hack that was needed on Snow from
the Pit and Kirby boards (which do not have that PLL anymore).
Change-Id: Ia35f47a765acff60481f0907f7448ec4f78e0937
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66887
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit c3b1a8b687b535f4d5ac1b3bd2a4760151698fdb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6609
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Apparently the IROM doesn't like data caches... the recently added
dcache-in-bootblock makes A-A booting fail, and flushes/invalidations
alone don't seem to fix it. It's pretty fast anyway, so we just disable
the cache again for the duration of the IROM call.
Also removes a superfluous invalidation line from the bootblock code...
dcache_mmu_enable/disable already take care of that.
Old-Change-Id: I35580d15664c7b4197d4ed14028720147adbf918
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66602
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e9c28a6a7a88c8286e62764ee5ad2694da2e822f)
exynos5: Implement booting from SDMMC media
This patch augments the alternative CBFS media source implementation for
Exynos5250 and Exynos5420 to allow booting from SDMMC devices (such as
an SD or uSD card reader, if available). It also moves MMC
initialization for the Snow, Pit and Kirby boards from romstage to
ramstage (mainboard_init) to prevent it from interfering with the IROM
during SDMMC boot.
Old-Change-Id: Ic4adef80c28262d084a53c28ec59aa7ac3af50c8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66154
(cherry picked from commit 08de13b72432c076e3327c048df93d89d52b0ecc)
snow and pit: turn on FET4 (for SD card) at bootup
Explictly enable FET4 on Snow and Pit.
Historically we haven't needed to do this because:
* On snow there's a bypass around FET4 which effectively eliminates
it. Even if we don't turn on FET4 the SD card is still powered.
Turning on FET4 doesn't hurt though and is technically correct.
* On pit the EC turns on FET4 on cold bootup.
On pit we run into a problem if the kernel turns off FET4 like in
<https://gerrit.chromium.org/gerrit/#/c/65332/> and then we get a
software reset or warm reset. In this case the EC won't know to turn
it back on.
This was ported from: https://gerrit.chromium.org/gerrit/#/c/65673
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I57337f12b38889e6afee8577cf8807ec4c41e91c
Reviewed-on: https://gerrit.chromium.org/gerrit/66786
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
(cherry picked from commit e910117047d898b6b1d0dc965ef2ec0237d17646)
Squashed three commits for alternate cbfs SD support.
Change-Id: Idbd1fd4776cbf8cb20d03e6b691104cd8540a1ec
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6530
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This resolves WiFi issues after suspend/resume.
It needs related SPI descriptor soft strap change to
enable SLP_WLAN as a GPIO instead of owned by the ME.
Change-Id: I03f4458d1e52a913770d391061baa6cfa41e8558
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170577
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit cf1fe0524ad4793c8c422dc3fed3007b7fc96038)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6533
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
New SPD and update to the SPD map. Add both a 4GB and 2GB option.
4GB = RAM_ID{1,1,0}
2GB = RAM_ID{1,1,1}
Original-Change-Id: I37318c1b5a6ee84b7c55da00d326f10fe8af6f1e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 7eb5a4ef1062a34e883c3f356ab0dc00ba07910d)
Change-Id: I0f35a7f5191fefeb5910a2d28aea153516d9a11d
Reviewed-on: https://chromium-review.googlesource.com/171693
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit b02fa777aa5935021b2c69f7345dffd111cbd118)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6545
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
gma_fui_init repeats the initializations already performed in gma_setup_panel.
These redundant initializations reset any gtt settings done before this call.
Hence, they had to be done again after call to gma_fui_init. However, the call
gma_fui_init is not required at all. Does not affect the behavior of suspend/resume.
Old-Change-Id: Idfb9f9930624694b878ddc0fe8648b3c8dd80e55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65997
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit c376aea1b89c9a829874d5c657693993a3bb1f13)
Falco/Slippy: Patch to fix garbage on screen during graphics initialization in normal mode
Depending on the init_fb parameter:
1) For normal mode, first page is filled with zeroes and setgtt is used make all GTT entries point to this
same page
2) For developer/recovery mode, we init the gtt to consecutive pages
Old-Change-Id: I281b0b7efe01f7892e98b19ff9a63c04b087bd2c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 97c99dfe52ef3a87d387fdbf27ad3a28ad81c722)
Squashed two graphics related commits for Falco/Slippy.
Change-Id: I7ddb92672c026fe66f9fb0caba9d8fdc3f8a9d0a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6536
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The ALC283 needs a double function reset to ensure that all settings
are reset and the firmware beep is functional.
Original-Change-Id: Id9ddc6f4914957f39c5f9cdfaaac354808929146
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@google.com>
(cherry picked from commit c59865ac464af308baedcd69aa662f46ff3a04d3)
Change-Id: Ie6f3a8179376bc97a6d22712dd965f5e0e6ec5d6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167313
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit b31d7a31b838e67a4b7f33119a3baea049d30a36)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6518
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Change-Id: Ia2e5427fec1bfff9babb9c59a3878323277f4f4c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66555
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2b96235123d55db3ff5ae5c2454b65de831a1c18)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6524
Tested-by: build bot (Jenkins)
This patch ports the USB A-A firmware upload functionality from
exynos5250 over to exynos5420. Essentially just like a conflictless
cherry-pick of 9e69421f5f0eebf88c09913dee90082feab2856c. It also fixes
the exact same bug with SPI initialization for Pit and Kirby.
Old-Change-Id: Ief0ed54c0beb2701e51201041f9bc426b2167747
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65751
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 5dff43f929478f83939221df13b961a69f89b132)
exynos5: Fix trivial style nits
A few curly braces on the wrong line.
Old-Change-Id: I4ddac4476c6509dc1716e8c1915fbdb67d346786
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66153
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
(cherry picked from commit 41e3fd9eaafe36433723f4e96a6d94c04e5fbafb)
Squashed two related commits.
Change-Id: I22d579693b5e7270aacb45bbe3557e40893dd1f8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6500
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This improves firmware boot time substantially. Because cbmem isn't available
yet, we need to allocate some space in sram for the ttb. Doing cache
initialization in the bootblock means we can implement this once per CPU
instead of once per mainboard.
Old-Change-Id: Iad339de24df8ec2e23f91fe7bf57744e4cc766c5
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65938
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c32b9b32ad933e627b9ea98434b392239b1fea73)
exynos5420: flush caches and disable MMU in resume path
This patch flushes the caches and disables the MMU before resuming.
c32b9b3 ("Set up caching in the bootblock.") had a bug where the
dcache and MMU remained enabled in the resume path. This caused
the machine to hang on resume. However, other bugs were preventing
us from testing this properly earlier on so it went unnoticed until
now.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ib1774f09d286a4d659da9fc2dad1d7a6fc1ebe5e
Reviewed-on: https://chromium-review.googlesource.com/67007
Reviewed-by: ron minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4fdf9763d25f70fd1e3591f6ff9785f78dd6170d)
Squashed two related commits.
Change-Id: Ibd42b28bb06930159248130e5ceaddb3b4b6cc2a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6511
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
We set up L2 cache early in romstage now so the old
function is now redundant.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Icec93810ddd7feb48286d4b600cb2d58af38b7ef
Reviewed-on: https://gerrit.chromium.org/gerrit/65428
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit bb91f1078ea55a7c8bdc19336cef2ec9a5f4511f)
exynos: stack size: Increase the stack size to 16KB.
The lzma decoding function in the RAM stage allocates nearly 16KB on the stack
which is shared between the bootblock, rom stage, and ram stage. The stack had
been much too small and needed to be expanded.
Old-Change-Id: I1b74fff9b54e506320d58956b779b3a102e66868
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65937
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 243d8a80f68dd257ecc5b4e19614bc7f0f5d398b)
exynos: gpio: add a bigger delay when reading board strappings
Z-state pins were not reading reliably with a 5us delay, so increase
it to 15us.
This is ported from https://gerrit.chromium.org/gerrit/64338
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ife6ea2ef5989e1a4c17913278ab972f0fd7f7f35
Reviewed-on: https://gerrit.chromium.org/gerrit/65727
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 76f0f8203f1af3f461745cefcc94e97c422d9084)
exynos5420: enable DMC internal clock gating
lets enable memory controller internal clock gating for ddr3.
with these bits enabled we save some power out of ddr3.
This is ported from https://gerrit.chromium.org/gerrit/#/c/60774
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I2f9b0d78483b3ea7441f54a715c7c1e42eda3f7f
Reviewed-on: https://gerrit.chromium.org/gerrit/65728
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 022a81c44e655a9f81e974e730c0cecc1f048781)
exynos5420: Correct the 600MHz PMS value
In UM ver0.02, 600MHz clock PMS values differs from what is programed
currently. Though this also results in 600MHz clock, but it is better to
match what UM says. This patch chnage this as per UM
This is ported from https://gerrit.chromium.org/gerrit/#/c/65106/3
(Note: we already used the correct 600MHz value for KPLL)
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I6786815ab33427a23436e6ee37295f6c37dcd3d5
Reviewed-on: https://gerrit.chromium.org/gerrit/65726
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ceabf57ca78449fa6e9cfd212bdf4774706de92f)
Squashed five commits pertaining to exynos.
Change-Id: I3fd894aed15b8cd161c30904a46dac7e07eb8992
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6425
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
(Clone of Falco change Ie2111e4bb70411aa697dc63c0c11f13fbe66c8d8)
Old-Change-Id: I5feba8fdbafba6d2de9f7d3de6170defc0d45a32
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66536
Reviewed-by: Dave Parker <dparker@chromium.org>
(cherry picked from commit b78a872a6647d7bb82f6c06a75e4075e451a1622)
peppy: Disable unused clocks
CLKOUT for PCIE ports 2-5 and CLKOUT_XDP are not used
and can be disabled.
This change was modled after the change made in Falco:
Falco-Change-Id: I0f996e90f0ae42780de3a0c8dc5db00ec600748b
The only difference per schematic for Peppy was PCIe 1 supports
a NGFF interface. PCIe 0 is connected to WLAN.
Old-Change-Id: Ib4871cb2655316cb260ab33ada6b9d81f271377f
Signed-off-by: Steven Sherk <steven.sherk@se-eng.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66693
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 8f12335013a510dee3c21b55251ab00c0fbac609)
Squashed two related commits.
Change-Id: Ibc5b902018eec07fdccaa8c6cb066ce918f6a6b5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6419
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There seem to be a significant number of shutdowns during suspend resume
tests related to critical temperatures. It is possible that we are getting
a bad reading from PECI and shutting down prematurely in some cases.
If we get a reading that is above critical then wait for the EC to re-poll
and then re-check the temperature in case it was just a bad reading.
Also add some ACPI debug messages when this happens.
Original-Change-Id: I0ab7bdcc50d133981c0f36fc696b06d4a1d939a7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66937
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a39d7b11dd7b2af37fc2658542d56b32e3966ed4)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ib612266511d90749ec6507f8467c71523ee8fb95
Reviewed-on: https://chromium-review.googlesource.com/66939
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit e98da983dca7819490464bddf08b9c53f28d2712)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6457
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change-Id: I9aa3652d1b92cece01d024e19bdc065797896001
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6470
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The SMP on Exynos 5420 requires setting a special page and entry wrappers in
firmware side (SRAM) so kernel can start cores (and to switch clusters).
Change-Id: I77ca98bb6cff5b13e95dd29228e4536302f0aee9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64770
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
(cherry picked from commit 4a11c7ab78cc0811df0f88763b0af8b9f24e5433)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6405
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This moves the call to setup_power() before system_clock_init().
This causes the PMIC to set up the voltage rails earlier so that
the CPU clock can be set up at a faster rate (in the follow-up
patch). After system clock init, we re-initialize the PMIC's I2C
bus since the input clock rate will have changed.
Old-Change-Id: Ieb828ac25daad7ee95bfa4823aaaf161028c9c92
Reviewed-on: https://gerrit.chromium.org/gerrit/64744
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 6c133a84ef4a32c35577a266905e02af8c2d9278)
pit: save setup_power() status and die later if needed
Since system clock and console initialization now happen after power
setup, we cannot print error messages in setup_power(). This patch
re-factors the code a little bit to save the status of setup_power()
so that if we get an error during setup_power() we will wait until
we can actually print something before dying.
Old-Change-Id: Id7ff477224b104b3c7e221c1d2df460ca9125f3b
Reviewed-on: https://gerrit.chromium.org/gerrit/65009
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 0c89f922b20bc1291ac7ba7b2c22bdce911be7a4)
Squashed two closely related commits.
Change-Id: I3efe29412738959e698c89d26e682536ceabdff8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6403
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Remove #include early_serial.c and rename to early_init.c as no actual
UART configuration is done here. Note that this SIO component still
hard codes its base address to 0x2e.
Change-Id: Ieef32ac7285246717f0519ffed4314ba28cd47dc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6271
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This change makes it possible for vboot to avoid an
exploit that could cause involuntary switch to dev mode.
It gives depthcharge/vboot some information on the
type of input device that generated a key.
BUG=chrome-os-partner:21729
TEST=manually tested for panther
BRANCH=none
CQ-DEPEND=CL:182420,CL:182241,CL:182946
Change-Id: I87bdac34bfc50f3adb0b35a2c57a8f95f4fbc35b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/182357
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
Tested-by: Luigi Semenzato <semenzato@chromium.org>
Commit-Queue: Luigi Semenzato <semenzato@chromium.org>
Reviewed-on: http://review.coreboot.org/6003
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Set critical temp to match newer devices
Change-Id: I11f32297a9b8c9a3554821b5d1cd723d8d9e2b69
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/6023
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
BUG=chrome-os-partner:21535
BUG=chrome-os-partner:25990
BRANCH=panther
TEST=manual: Boot on Panther and look in /sys/firmware/log for
the string "PCIe Root Port 4 ASPM is enabled"
Change-Id: I294571c113a8909adb2e97afca92aef9a1af917c
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6007
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
FLVL is used to keep track of which thermal zones are active, but it is
not initialized upon boot / resume. An initial value of zero corresponds
to all zones being active, which causes the fan to spin at max speed
until the OS changes zones. Fix this annoyance by initializing FLVL to
the lowest temperature zone.
Also, fix a related bug where FLVL may jump to an undesired value. For
example, if FLVL=3 (zones 3 + 4 active), and zone 0 is set to off (it's
already off!), FLVL would previously become 1 (zones 1 + 2 + 3 + 4
active!). Fix this by not taking zone ON / OFF actions if our zone is
already ON / OFF.
BUG=chrome-os-partner:25766, chrome-os-partner:24775
TEST=Suspend / resume on Panther 20 times, verify that thermal zone after
resume matches expectation based upon temperature. Also, stress system
and verify thermal zones become active according to temperature
increase.
Change-Id: Ic60686aa5a67bf40c17497832b086ba09d56111a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186455
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186669
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6006
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Without this patch coreboot will always use the read-only version
of ramstage, even if there is a read-write version available.
BRANCH=panther
BUG=chrome-os-partner:25870
TEST=Install different RO and RW version, check in cbmem log that
coreboot's romstage and ramstage have different timestamps
in their banners.
Change-Id: I723a3d4479d59534660728d891a9f40a077b4ef0
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186664
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/6005
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Based on latest thermal report
BUG=chrome-os-partner:24532
TEST=boot tested on panther
BRANCH=panther
Change-Id: I4b8639f926fc3cf57eb5329818b9b912bfbe222d
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186113
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6004
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When the thermal sensor on Panther is unavailable (early on resume)
it will return 0x80 which causes our AML thermal code to overflow,
which causes the system to shut down. Instead, return a reasonable
value in those cases so that the system will continue running until
the sensor gets back on its feet.
BUG=chrome-os-partner:24918
BRANCH=panther
TEST=suspend_resume_test survived more than 100 iterations on Panther
Change-Id: Ib2d714c39d353ce2415361bc6590784a3f6837d2
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182369
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6002
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Sometimes the SuperIO seems to provide wrong readings, especially early
on after a resume from suspend. This will cause the system to power off.
If that happens, wait for 1s and read again, to make sure the high
temperature value was not just a flaky read.
BUG=chrome-os-partner:24918
BRANCH=panther
TEST=Boot tested on Panther.
Change-Id: Ib3768528d90e34448e96ad587b2503d8d8b1a775
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182188
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6001
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
There is no speaker and no builtin microphone in this system,
hence disable them in the verb table.
BRANCH=panther
BUG=chrome-os-partner:24230
TEST=Boot Panther, see Microphone and Speaker disappear
in Audio Settings
Change-Id: I32bacec38ba3ba0c2359a8fc94e12af64f576012
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182006
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6000
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Some SSD modules don't support DEVSLP correctly due to their
firmware. Since the power savings are minimal, don't use
DEVSLP to prevent potential problems. Some of the symptoms
are that sometimes this causes USB devices to not work properly.
BUG=chrome-os-partner:23186,
BRANCH=panther
TEST=Boot tested on Panther
Change-Id: Iba3f721c73e0e760b6a9861ca23480ddb923df40
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181957
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5999
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
There needs to be an ACPI linkage to provide the power resource
needed to wake this device so the kernel will enable the SCI
before going to suspend.
A link is added for both NIC and WLAN, but it is only tested
on the NIC.
This is a forward port from Duncan's beltino patch.
BUG=chrome-os-partner:24657
BRANCH=panther
TEST=build and boot on panther, suspend and wake with etherwake
Change-Id: I2804d2e904e26d6e34f5a177f0dabc1aaa3f0288
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181752
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/5998
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When the system loses AC power, the system will power back on
automatically as soon as the AC power is reapplied.
BUG=chrome-os-partner:24066
BRANCH=firmware-panther-4920.24.B
TEST=boot tested on panther
Change-Id: I37ddc5a162afcce01c2df5f509bfd7f2d0c15ba1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179537
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5996
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
(panther port of Ib980100c648ae7472eac6f97e47f8ef3cbe72c7e)
BUG=none
BRANCH=none
TEST=boot tested on Panther
Change-Id: Iedcc107a43be170762d42d515c7e2a16ec395452
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/177474
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Mohammed Habibulla <moch@google.com>
Tested-by: Mohammed Habibulla <moch@google.com>
Reviewed-on: http://review.coreboot.org/5995
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This writes the default value to the register, but it gets rid of
the error that disturbs some of our tests:
ERROR: PNP: 002e.4 70 irq size: 0x0000000001 not assigned
(panther port of Ieab1c776b553c996a7d06e4059110943aaf41338)
BRANCH=none
BUG=chrome-os-partner:23945
TEST=boot test on Panther
Change-Id: Id45c3bdc0d2feaf6f75d984c41d1f6ffef592d4d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/177468
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Mohammed Habibulla <moch@google.com>
Tested-by: Mohammed Habibulla <moch@google.com>
Reviewed-on: http://review.coreboot.org/5994
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
(panther port of I933c475f693b0271f86b5166eb2c9b3873f1c2c6)
BUG=none
BRANCH=none
TEST=boot test on panther
Change-Id: I5958a8d701901706eaa38df4323120c8352fea5c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/176563
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Mohammed Habibulla <moch@chromium.org>
Tested-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: http://review.coreboot.org/5993
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
There is nothing attached to these devices so we can disable
them as well as the function 0 DMA controller.
Also remove the EC SMI/SCI mappings since there is no EC.
(panther port of Iedfe711058676f7ee118b0b66ab0f8a1e792ea87)
BUG=chrome-os-partner:23563
TEST=none
BRANCH=panther
Change-Id: Ie66f9b66744db98f8638495c05f3a075b6fa6db9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/174944
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Mohammed Habibulla <moch@chromium.org>
Tested-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: http://review.coreboot.org/5992
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Fan is attached to port 2 instead of 3.
(panther port of I9878063a24b0b908c74522580f776a4ce7d03d75)
BUG=chrome-os-partner:23563
TEST=none
BRANCH=panther
Change-Id: I028e0e5a748fa0a20d34e27e870e14ed8c75e4d1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/174984
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Mohammed Habibulla <moch@chromium.org>
Tested-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: http://review.coreboot.org/5991
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In C99 we defined a syntax for this. GCC’s old syntax is deprecated.
Modelled after commit 8089f178 (mainboard/lenovo/x230 Fix usage of GNU field
designator extension) [1].
[1] http://review.coreboot.org/5392
Change-Id: I51c72252800be64b9420d845e330fc0481c66470
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/6024
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
(Panther clone of Ia41af8425ab6c24746253abd025acd3365dd5a18 by reinauer)
BUG=chrome-os-partner:23563
TEST=emerge-panther chromeos-coreboot-panther
[pg: Drop configs/, which is chromeos stuff, adapted
libpayload's config.panther to work with upstream]
[pm: Add HAVE_IFD_BIN and HAVE_ME_BIN Kconfig options]
[pm: rebase to master branch of coreboot upstream]
[md: don't use FMAP to get MAC address if CONFIG_CHROMEOS not set]
Change-Id: I50fd5c02da154e424dfefbe2020f4ce7ef9a4f8f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/174555
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Mohammed Habibulla <moch@chromium.org>
Tested-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: http://review.coreboot.org/5990
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
We have the macro, let us be sure to make use of it.
Change-Id: I8dc5ca580c7485e3cce7ebc29189a452de52b1b1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Like with other more recent boards already using DYNAMIC_CBMEM,
the pointer to TOC is no longer stored in GNVS for ACPI.
Change-Id: If2e11294202c40793ec985e2c0c006bbfcd03d3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6034
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
First of many to remove guarding the inclusion of headers based on
CONFIG_ options. This *potentially* could hide issues such as functions
being swapped from under our feet, since different runtime behaviour
could be declared with the function same name and type-signature. Hence,
depending on the header we happen to get may change runtime behaviour.
Change-Id: Ife56801c783c44e1882abef711e09b85b7f295a4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6055
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
No need for these.
Change-Id: I1df6e2ef06bd5546a66ee05a15fa2f7c3daf8853
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6039
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM.
Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: I219ae74d60fd7211de2edee96e74bbe13130bb94
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5849
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: I31841e7bf578c77d08d452779936fcf5b3026d4f
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5848
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: Id967f6057759cf0603c84514d32b067c3658306f
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5831
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: I4e5f2d7e8e6b76703fccce38fc7e3165d763e97f
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5830
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: Idd7305cb34be77894ca4b6062bc0a2dc61126347
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Following the reasoning in:
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: I5be77fe6670601e103260077fae07a5b9fd41f1d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5821
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Remove use of global variables uma_memory_base and uma_memory_size
from builds with Intel northbridges, as these variables can be kept
within the chipset or even as stack locals.
Intel platforms have no functional implemenation for option GFXUMA.
If we did implement some choice between external and integrated graphics,
it needs to be named in less obscure fashion.
Change-Id: I12f18c4ee6bc89e65a561db6c2b514956f3e2d03
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This defines new board_info entry 'Vendor name' to be displayed in place of, or
in addition to, the CONFIG_VENDOR string 'Google'.
Also flag these as flashrom accessible SPI without socket. Instructions to
disable flash write-protection can be found at Chromium developer documentation.
Change-Id: I69791a091417a80d01e0ba2c6462417730a07be0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5750
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The Codec and ALS both have interrupt sources that can be configured.
The ALS kernel driver currently does not try to use it but the codec
driver does for things like jack detect.
ACPI Devices are added, but as with other ACPI devices the HID may
need to be updated once more official strings are decided.
BUG=chrome-os-partner:24380
BRANCH=baytrail
TEST=manual: build and boot on rambi and check for functional lightsensor
Change-Id: Ib51a2aaf32d5597926fcbe9183947e9ac53e1468
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182366
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5049
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In order to support probing I2C devices when the controller is
in ACPI mode the mainboard needs to decalre them in the proper
scope with the address/interrupt information. The touchpad devices
are ATML0000/ELAN0000 and the touchscreen is ATML0001 so they can
be distinguished in userland scripts based on ID. There is also
a special "ISTP" node that indicates whether the devices is a
touchpad (=1) or touchscreen (=0) in case this is useful to drivers.
These names may not be final but they are a starting point and can
be easily changed.
Atmel devices also have a bootloader mode which needs to be
declared as a separate device. Unfortunately it does not work as
expected to have multiple I2cSerialBus() resources declared in a
single device and have it select properly, even with the use of
StartDependentFn(), so bootloader devices are declared separately.
The original devices are left in \_SB scope and are only enabled
if the I2C controllers are in PCI mode. The new devices are only
enabled if the I2C controllers are in ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=baytrail
TEST=manual
1) Ensure there is no change in functionality by default and that
the devices are still probed by chromeos_laptop in the kernel.
2) Enable lpss_acpi_mode=1 in devicetree.cb and kernel changes to
add _HID entries for devices in appropriate drivers. Ensure that
the devices are probed successfully. Further changes are needed
to the chromeos-touch-firmware scripts to load config and update
firmware based on the new ACPI _HID entries.
3) Put touchpad in bootloader mode (by flashing bad firmware) and
ensure that it is detected at address 0x25 and the firmware is
able to be updated.
Change-Id: I5b9b47ddc94474a677497271e963f62cb09438e0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182259
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5045
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Nothing can actually use this as the EC cannot speak
using baytrail's SERIRQ protocol. Also, the voltage
bridge is going away so nothing will be hooked up to it.
Therefore disable this it.
BUG=chrome-os-partner:24693
BRANCH=rambi
TEST=Built and booted.
Change-Id: I406bb9c227578ec0a75eaf67143b3b27cb7880ae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182082
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5042
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Set critical temperature thresdholds to 70C. This will cause DPTF
framework to shut down the system so it may need to be higher or
lower but will need some testing.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, start DPTF framework and observe it
using specified critical thresholds.
Change-Id: Ibbf6d814295eb5ff006cb879676b7613f5eb56a3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182025
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5038
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The SoC needs to provide a 32k clock signal SUSCLK for
some modems to work properly, so this enables the signal.
BUG=chrome-os-partner:24425
TEST=Manual, check SUSCLK pin with a scope.
Change-Id: Ibc0d5bb38a2c3e16f381dfc256097fdced67fd1c
Reviewed-on: https://chromium-review.googlesource.com/180101
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5722
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
eMMC CLK was incorrectly configured as PULL_UP, but should have been
PULL_DOWN. 2K pulls somehow masked this problem.
BUG=chrome-os-partner:24353
TEST=Verify eMMC is bootable on Rambi on boards that previously failed
with an all-20K, all-PU eMMC pin configuration.
BRANCH=None
Change-Id: I0cbb6ebbb6818f83402b99330728266b09a0f5d6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181034
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5026
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Not used currently on rambi board. Disable in case it
saves power.
BUG=chrome-os-partner:23862
BRANCH=none
TEST=build and boot on rambi
Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180084
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5020
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
With the ACPI GNVS exported and depthcharge changed to
initialize eMMC in ACPI mode we can now put the SCC
devices into ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot on rambi, test eMMC and SD card
Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179901
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5018
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
This enables the DPTF framework, but it doesn't do much
without some sort of kernel+user components to drive it.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: Icb632a6e70c3912bbdfa6ef3f5c87cd79d2b8a3a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5003
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These are the values that are seen with VBIOS and
may need tweaked for derivative panels.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179365
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5001
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Now that the SD card controller is limited to the SD card
2.0 spec it's possible to use 20K pulls for the pads.
BUG=chrome-os-partner:24423
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Able to dd to/from /dev/mmcblk1 without
any errors.
Change-Id: Id5396c55330a84bf7a09d227507d2bfcde66a1a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179423
Reviewed-on: http://review.coreboot.org/4999
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The rambi board can only meet the SD card 2.0 specification.
Therefore, the controller capabilities need to be overridden
to match.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows
high speed as maximum timing as well as 3.3V signal voltage.
Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179415
Reviewed-on: http://review.coreboot.org/4998
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Bay Trail has 3 banks of gpios. Therefore, in order to
properly identify a gpio the specific bank number as well
as the GPIO within that bank is needed. The SPI
write-protect GPIO is GPIO 6 within the SUS bank (offset
0x2000).
BUG=chrome-os-partner:24324
BUG=chrome-os-partner:24408
BRANCH=None
TEST=Built and booted. Looked at GPIO sysfs in the
chromeos_acpi directory.
Change-Id: Ic51b5abe3bacf6cf9b6a90cf666f1a63b098a0e3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179195
Reviewed-on: http://review.coreboot.org/4995
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Leave it under BOOTMODE_STRAPS to control whether these have
any functional meaning on the build.
Change-Id: Ieb59aa7ab4b1e8da6a1002e7a8e5462eb7988d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up
on certain boards.
BUG=chrome-os-partner:24353
TEST=Manual. Burn FW on board that previously failed to boot eMMC,
verify chromeos can now install + boot from eMMC.
BRANCH=none
Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178917
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4991
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Rambi 1.5 boards use the native SD card controller on baytrail.
Therefore, enable those signals. The CLK, D*, and CMD pins use
2K pulls as these were shown to not exhibit any errors when
doing reads or writes to a DDR50 sd card.
Note that if a servo is connected on needs to enable the
sd_vref_sel rail to pp1800 as this causes issues with card
detect if it is not set to pp1800.
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Tested sd card read and write works in kernel.
Also noted that write protect detection works as well.
Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178961
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4990
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Some 1.5 boards have a single channel ram configuration.
Accomodate such configs.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built and booted ChromeOS.
Change-Id: I513327e47b9211d2dd1ea960d7da671a3773cb91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178340
Reviewed-by: Nick Sanders <nsanders@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: http://review.coreboot.org/4983
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The level shifting between 3.3V and 1.8V for the SERIRQ
signal is not working. Instead use the SERIRQ pad as
a gpio which is used as a direct IRQ signal for the
keyboard interupt.
BUG=chrome-os-partner:23965
BRANCH=None
TEST=Built and booted rambi. Keyboard works with associated EC change.
CQ-DEPEND=CL:177189
Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177223
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-on: http://review.coreboot.org/4979
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The romstage code for rambi uses the mmio way of reading
inputs. However, this is a problem is the GPIOs are set up
as legacy mode. Subsequent warm resets mean the ram_id is
read incorrectly. Ensure the ram_id is read consistently
by keeping the GPIOs for ram_id in mmio mode.
BUG=chrome-os-partner:24085
BRANCH=None
TEST=Built and booted. And rebooted. Now seeing consistent ram_id
values on warm resets.
Change-Id: Ieff98c000be80998854f325754f1e819975d2be5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177230
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4977
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Some of the drivers in the kernel were not so happy about
having shared IRQs. Also, sharing IRQs means more code
needs to be run in interrupt context to determine if the IRQ
was meant for a particular device. Fix this.
No more 'mmc1: got irq while runtime suspended' messages.
BUG=chrome-os-partner:24056
BRANCH=None
TEST=Built and booted. Looked at /proc/interrupts and noted no
more sharing between pci devices.
Change-Id: Ie5da102204ffe3156dd55ab17af77df245a57c97
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176792
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4973
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The kernel chromeos_laptop driver nomenclature expects the
board name to not be in all caps. Fix this as well as the i2c
address for the trackpad.
BUG=chrome-os-partner:24307
BRANCH=None
TEST=Built and booted. trackpad device is found. IRQs still not
working yet.
Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176680
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4970
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Also add the relevant info about these pins to the ASL tables + add
SMBIOS type 41 data for these parts.
BUG=chrome-os-partner:22863
TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ
regwrites w/ GPIO_DEBUG look correct.
Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8
Reviewed-on: https://chromium-review.googlesource.com/176299
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4963
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
For some reason HDA can now be disabled. It's unclear what changes
in the baytrail code allowed this to happen, sadly.
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Noted hda is not in lspci.
Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176394
Reviewed-on: http://review.coreboot.org/4961
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Rambi has 3 pins that need to be configured for SCI and SMI:
1. GPIO_CORE[0] - runtime SCI pin
2. GPIO_SUS[7] - SMI for firmware lid events
3. GPIO_SUS[0] - wake pin for S3 wakes from EC.
Configure these pins now that the rest of the infrastructure
is in place. The one thing that is yet to work is runtime SCI
for lid events once booted.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=built and booted. lid close at rec screen works. And wake
from S3 with a keyboard press works.
Change-Id: I5f8e38ec5f4cf1a8ef7aa7fcee9abc344d9b184f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176393
Reviewed-on: http://review.coreboot.org/4960
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
As rambi is a baytrail board it doesn't have a dedicated wake pin.
Therefore, one needs to enable the proper GPIO to wake up the sytem
before going into S3.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Put system into S3. Keyboard press created wake event. Also, typed
'lidclose' on EC console while at recovery screen. Machine properly
shutdown.
Change-Id: Ic67b6bce93d57c620f498505d83197e4ae34a07d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176392
Reviewed-on: http://review.coreboot.org/4959
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The superio.asl file allows for the mainboard to hang
devices off of the LPC bus in ACPI. Include the keyboard
controller, EC memory map, and host interface's resources.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Noted resource reservations in dmesg.
Change-Id: Ida6481cd4c4725b5d3946bc64179ee99c93b0106
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176134
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4950
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Fix the SMI and SCI gpios for Rambi. Also, add in the
EC callbacks for the SMI handler. Note that the handler
for GPI SMIs has not been tested yet as baytrail chipset
code doesn't yet support setting up those configurations
yet.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Noted that SCI was enabled in /sys/firmware/acpi/interrupts
for the EC's SCI GPI. Also was able to see Chrome EC messages
with CONFIG_DEBUG_SMI and powering down at the dev screen.
Change-Id: I67b278fd38e1c09271d2c1e16e42f6e8c49e3a70
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176077
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4948
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Baytrail has a configurable SCI irq. Add support for
properly configuring SCI irq. Note that it is currently
fixed to IRQ9, but the code supports setting it to the
other supported values. The current mainboards using
baytrail defer the madt IRQ override information to the
chipset.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Noted 'SCI is IRQ9' message.
Change-Id: I7b307bd58f9de944f0cb4c116107a15345499f2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176075
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4946
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These changes to the eMMC pads allows the kernel to see the
eMMC device. One is able to install onto the eMMC device, and
the kernel is loaded and booted from eMMC device. Note, that
it may not fully boot because of other issues such as
not-completely working ACPI support.
BUG=chrome-os-partner:22580
BRANCH=None
TEST=booted off of usb drive. can see eMMC device.
Change-Id: I9c088398297a0b559383bdf4a389dd19a1110e0f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176073
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4945
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
For some mysterious reason GPIO_S0_NC22 is making the eDP panel
go entirely white when it is configured with internal pullup.
Since these (supposedly XDP related) pins are unknown functionality
lets set them to GPIO_DEFAULT instead of GPIO_NC.
Additionally the VBIOS is being changed to issue int15 callback
to determine the boot graphics device. If we list both LFP and EFP
then the dev/rec screens will show on the panel when HDMI is not
attached and otherwise will display on HDMI.
BUG=chrome-os-partner:23507
BRANCH=rambi
TEST=build and boot on rambi, see firmware/kernel screens on the panel
when HDMI is not attached, and firmware screens on the panel and
kernel screens on both when HDMI is attached.
Change-Id: Ieb05a591d63c4f8e09fa154eeb76004d32579508
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175952
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4944
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The FADT for baytrail had incorrect offsets leading to
the kernel spewing a huge mess of ACPI errors. Fix these offsets
to be initialized in the chipset code.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted into kernel on rambi. Login screen comes up.
Change-Id: I89fc2a4fd800ff01cedf89b51cfb1369aceb9f03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175663
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4941
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This provides the initial support for interrupt routing
in bay trail. It includes both acpi changes and board changes
to ensure the interdependencies are met with the current ASL
code. The PIRQ routing is handled by the mainboard exporting
an irqroute.h header that describes the per device and PIRQ
PCI settings.
There are still a lot of ACPI errors in the kernel with this
change, though.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted rambi into kernel.
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e
Reviewed-on: https://chromium-review.googlesource.com/175700
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4940
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
CONFIG_ARCH is a property of the cpu or soc rather than a property of the
board. Hence, move ARCH_* from every single board to respective cpu or soc
Kconfigs. Also update abuild to ignore ARCH_ from mainboards.
Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5570
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
A global flag oprom_is_loaded was used to indicate to
U-boot that VGA option ROM was loaded and run, or that
native VGA init was completed on GMA device.
Implement this feature without dependency to CHROMEOS option
and replace use of global variable oprom_is_loaded with call
to gfx_get_init_done().
Change-Id: I7e1afd752f18e5346dabdee62e4f7ea08ada5faf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4309
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently we have no developer or recovery mode switches when
building without ChromeOS.
Change-Id: I49adfcd8408838cf581430970be5efcef11ba06b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5596
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There is a lot of NVS allocated to things that are not really
used. Most of these are removed and some are moved around.
Thermals are expected to be handled with DPTF so I've removed
that bit of code but have not yet cleaned up the thermal zone.
I left in the SIO BARs since I think we will need those still
even though they may need work still.
BUG=chrome-os-partner:23505
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: Id16ee67e6b3709a303c001afd72947147f938127
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175626
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4936
Tested-by: build bot (Jenkins)
Add a length define for all the reserved MMIO regions and
use them in the ACPI code to reserve the regions there.
Add a region for the "abort page" documented in the EDS.
BUG=chrome-os-partner:23505
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: I2060dca0636a2fdc0533ddd0826f94add2c272c3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175624
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4934
Tested-by: build bot (Jenkins)
- a few clock gating bits were set improperly and were preventing
the system from transitioning out of S0 state.
- the XHCC registers were not getting the top byte set properly
which includes things like DMA write request size and request
boundary crossing control. This was causing memory corruption.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot kernel from USB on rambi with XHCI driver
Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4933
Tested-by: build bot (Jenkins)
Correct selection of UART depends of board layout, not the CPU
internals, so default setting should originate from mainboard.
Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5618
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.
Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
There is redundancy in terms of use of init_timer. We have a Kconfig option to
decide whether a board has init_timer as well as we use a stub for init_timer in
places where we do not have any init_timer defined. Thus, remove the Kconfig
option. Henceforth, all boards that do not have init_timer functionality can
include a stub_timer if required.
Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch implements a simple interface between the EC and mainboard
ASL code. This interface does not rely on the preprocessor, and
prevents name conflicts by scoping the interface methods. As this
interface is documented on the coreboot wiki, an in-tree documentation
is not provided.
Change-Id: If0b09be4f5e17cc444539a30f0186590fa0b72b5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5515
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
The GP15 ACPI object was used to get the state of the lid. However
GP15 is specific to certain Intel chipsets, and will not always be in
the ACPI namespace. Instead of hardcoding this object, let the
mainboard define it.
Also, document the ACPI interface for the EC.
Change-Id: I02a2eb3116af61ea5701f84507327aa40218597a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5444
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
This adds the EHCI driver back to libpayload and configures
the devicetree to route ports to EHCI.
This is hopefully just temporary until the issues with XHCI
can be worked out.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot from USB on rambi
Change-Id: I0549661f5e5fd83477f4839a05e7e21175b24b64
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175513
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4931
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This option is used to make uart8250mem option visible in menuconfig.
Showing it for these ARMs is incorrect.
Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The callers of the following functions assume the storage
area provided by the pointers is initialized. That's not the
case as these were just place holders.
- void acpi_create_intel_hpet(acpi_hpet_t * hpet);
- void acpi_create_serialio_ssdt(acpi_header_t *ssdt);
To fix this properly initialize the hpet entry, and just remove
the serialio_ssdt function entirely.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted through depthcharge on rambi. Noted no more
ACPI errors relating to invalid length.
Change-Id: If56ab033562ef2d755e9c9de42f507c95d291aba
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174716
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4917
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The EC LPC init function needs to run to enable the internal keyboard.
I needed this to confirm that it is just USB keyboards that are causing
all sorts of issues.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=boot to recovery screen and hit tab
Change-Id: Iea0fc66ba62ea7da71ef83c26e25ae32bef102bd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175207
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4915
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Enable first SATA port in Rambi device tree.
BUG=chrome-os-partner:23643
TEST=TEST=Manual, in dev mode. Verify on rambi that SATA disk is
detected, and kernel is found + booted.
Change-Id: Ic0cb5f9ff17ca0f6cc7941f203b9338df200811d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174916
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4914
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Add the on-board devices in the SoC to the device tree.
Also, disable the unused devices aside from TXE and HDA.
Those particular devices cause the system to shut down
when they are disabled.
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Built and booted through depthcharge. Noted the calls to the
southcluster disable function.
Change-Id: I482c1c9609833054aeb2948144af54b57d3df086
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174645
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4912
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
With the recent improvement 3d6ffe76f8,
speedup by CACHE_ROM is reduced a lot.
On the other hand this makes coreboot run out of MTRRs depending on
system configuration, hence screwing up I/O access and cache
coherency in worst cases.
CACHE_ROM requires the user to sanity check their boot output because
the feature is brittle. The working configuration is dependent on I/O
hole size, ram size, and chipset. Because of this the current
implementation can leave a system configured in an inconsistent state
leading to unexpected results such as poor performance and/or
inconsistent cache-coherency
Remove this as a buggy feature until we figure out how to do it properly
if necessary.
Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5146
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
As rambi has the ChromeOS EC on it the EC needs to
be configured properly. Do this along with updating the
ChromeOS support for passing on write protect state, recovery
mode and developer mode.
BUG=chrome-os-partner:23387
BRANCH=None
TEST=Built and booted to depthcharge. EC software sync appears to
work correctly. Additionaly, 'mainboard_ec_init' appears in
the console output.
Change-Id: I40c5c9410b4acaba662c2b18b261dd4514a7410a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174714
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4905
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There's some baked in assumptions internal to coreboot
that the BSP's cpu device exists in the device tree. Therefore
provide one in the device tree.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Compiled and booted with other changes.
Change-Id: I22ba10964760ee8efbc5bbd5d4ce65daf31b3839
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173702
Reviewed-on: http://review.coreboot.org/4887
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The ram_id[2:0] signals have stuffing options for pull up/down
with values of 10K. However, the default pulldown values for these
pads are 20K. Therefore, one can't read a high value because of
the high voltage threshold is 0.65 * Vref. Therefore the high
signals are marginal at best.
Fix this issue by disabling the internal pull for the pads connected
to ram_id[2:0].
BUG=chrome-os-partner:23350
BRANCH=None
TEST=Built and checked that ram_id[2:0] is properly read now.
Change-Id: Ib414d5798b472574337d1b71b87a4cf92f40c762
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173211
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-on: http://review.coreboot.org/4885
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
CHROMEOS is the meant to be selected by the user. The correct variable
for a mainboard to select is MAINBOARD_HAS_CHROMEOS. This will then
default to a CHROMEOS build, but when the mainboard selects CHROMEOS,
the user can no longer disable CHROMEOS.
Change-Id: I78fb15a0a9fef733e2de064d6c09cf774b7bce78
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5218
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
spd.bin can reside anywhere in CBFS, and we only use CBFS APIs to
access and read it. As such, there is no need to hardcode it, and it
can collide with mrc.bin or mrc.cache on some boards. Do not use a
specific position for spd.bin, but instead let cbfstool find the
optimal placement.
Change-Id: I496094d3c0de708813494095b7ac4be8addb4112
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5210
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
If the SerialIO devices are put into ACPI mode then it is possible
to use ACPI to instantiate the touchpad in the kernel without
needing to have a platform level driver to do the binding.
This is the "new way" of describing on-board I2C devices and the
upstream kernel is starting to add ACPI IDs to drivers so they can
be used in this fashion. For the Cypress touchpad use a generic
ACPI ID of "CYPA0000" to describe it.
In order to support the proper scoping of the touchpad device under
the appropriate I2C controller device the mainboard.asl file needs
to be included after pch.asl so the I2C device exists.
Change-Id: I81e053d27be478f3a19b6f9b13cd2b4fabcb88c0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5194
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are currently 4 SKUs:
0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz
0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz
0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz
0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz
Add each of the 4 spds to the build, and use the proper
parameters to MRC to use the in-memory SPD information.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built. Noted 1024 bytes of SPD content.
Change-Id: Ife96650f9b0032b6bd0d1bdd63b8970e29868365
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172280
Reviewed-on: http://review.coreboot.org/4872
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The calculations for static allocation are no longer valid.
Change-Id: I6740cdcec789abddf78485a0edaf24882ef8c2a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Based on info from commit messages (most devel/eval boards are mentioned
as such in commit message) and information from vendor sites (mostly based
on form factor).
Classification for siemens/sitemp_g1p1 is based on info by Nico Huber.
For Google boards based on info from ML posted by Aaron Durbin.
Remaining unclassified board is:
google/pit
For which very little info is available publically.
Change-Id: I12dfff4c629811a48cfc77be27bdc5081530b8f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4759
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
The replacement function confirms CBMEM TOC is wiped clean on power
cycles and resets. It also introduces compatibility interface to ease
up transition to DYNAMIC_CBMEM.
Change-Id: Ic5445c5bff4aff22a43821f3064f2df458b9f250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4668
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Do not expose options that are unsupported by the board. I tried for
a couple of days to see why hyperthreading wasn't working. It's not
supported by the CPU. The same applies to the baud_rate option. It
makes no sense to expose it to userspace via nvramtool.
Change-Id: I89b91820616d92fb4db20bf77f4b7f48a70353d5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4697
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
board_info.txt is a file to be used by board-status to add
some useful info to the generated table like flash chip type.
This series is autogenerated from wiki page Supported_Motherboards.
Change-Id: Ie2bda900713ef4883134477163320936c84c34f5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4701
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
One of arguments to cbfs_get_file_content was missing.
Change-Id: Icb4ef26f18d63c133bc32f1c62a524edee0621ea
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4696
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Delay the copying of MRC cache data from CAR to CBMEM until after
sdram_initialize() returns and cbmem_initialize() completes.
Calling cbmem_initialize() twice would complicate the decision logic
of when CBMEM area needs to be wiped clean.
Change-Id: Ic59e94cb2436293efc47b52f7418f5dbf76c714a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4666
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Ability to choose compatibility mode is interesting for testing payloads and
OS for compatibility with older systems.
As per comments
"ide_legacy_combined # TODO: Does nothing since
generations, remove from sb code?"
The "combined" mode was removed. It wasn't used by any mobo and the code for
it is almost identical to IDE one other than few bits relating to interrupt
handling and ISA mode.
Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Number one reason to use cbfs_get_file was to get file length.
With previous patch no more need for this.
Change-Id: I330dda914d800c991757c5967b11963276ba9e00
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4674
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
THis reduces risks of bufer overflows.
Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4279
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The main purpose of option rom is to supply int* handlers.
But supplying those is outside of coreboot scope and if someone needs those
they should run SeaBIOS anyway which runs the option roms wonderfully.
Running VGA oprom is kept because they're needed to init graphics.
This patch still keeps the options to include the option roms to make them
available to SeaBIOS.
Change-Id: I646334cf88094d3bf8f527779a68a07e0b4b93ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Configure the pins for the UART unconditionally in the mainboard code (when we
know which UART to configure) instead of in the UART driver. This also means
the UART will work if later software wants to use it without setting up the
pins.
Built and booted on pit with the serial turned off and some serial init
in the kernel decompression stub fixed.
Change-Id: Icab5755e4f935f52d44b9cb3b43d1cb62acce08f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65299
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4457
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch implements the basic infrastructure required to use the USB
A-A firmware upload feature on Exynos5 processors with Coreboot. It will
require a corresponding host-side script that activates the feature and
uploads the correct image parts in the correct order to harcoded target
addresses, as described in the comments of alternate_cbfs.c.
Also fixes a bug in the Google Snow mainboard where it would not
correctly initialize the pinmux configuration for the SPI flash bus.
During a normal SPI boot the IROM would already do that for you, but
when booting from USB you have to do it yourself.
Change-Id: I40a39f8f5d1d70b58dbf258015c1653a27097d67
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64875
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4456
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: I6729a139091b40d8fd9ba2aa7a8c4e14216d95c5
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64879
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4440
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The memory corruption problem in Exynos suspend/resume process is caused by two
things together: PHY_RESET and MRS command.
After stop sending MRS on resume, we can now remove the workaround of skipping
PHY_RESET.
Change-Id: I64acc27c1d2bb549ae6ad7d32ecda94b0355972c
Reviewed-on: https://gerrit.chromium.org/gerrit/64736
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/4433
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This includes the new dp code, which is better, and the fimd code,
which is changed and improved. We took the chance to remove un-needed
files, and also to remove some foolish u-boot habits, but not all of
them. That will take time.
With these changes we get graphics.
Since the only mainboards we have with 16 bit graphics are 5:6:5,
adjust edid.c to just use that format. If at some future time we need
4:4:4, which seems unlikely, we'll need to add a function to adjust
the lb_framebuffer. Note that you can't just divine this from the EDID,
as the graphics pipe format need not match the actual final format used.
The EDID reading works. We've been requested to support hard-coded
EDIDs and that will come in the next revision. Currently the hard-coded
EDID is ignored for testing.
Change-Id: Ib4d06dc3388ab90c834f94808a51133e5b515a4d
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64240
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This update the PMIC write sequence to be correct for newer board
revisions.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I2210b0d1945fb19c96a674c8fad1b0ff5a4a381e
Reviewed-on: https://gerrit.chromium.org/gerrit/64304
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This corrects a minor typo used for a part number.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I8583cbfc3b4a6c3ad06419f5aab3ba7a8f685575
Reviewed-on: https://gerrit.chromium.org/gerrit/64301
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4424
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In a previous commit the contents of wakeup_need_reset were removed because
the GPIO it referred to wasn't connected to anything on pit. I didn't realize
at that time that that could have been because we hadn't tried getting
suspend/resume working on pit and hadn't updated that file. On snow, the GPIO
is the recovery mode pin. This change updates pit to have the right GPIO,
kirby to read that GPIO, and makes the comments for both pit and kirby more
explicit and spells out the fact that this is the recovery mode GPIO.
Having a check here at all may still be a holdover from snow that isn't
applicable to pit or kirby, but since there is a parallel as far as the
recovery mode GPIO we might as well make them match while waiting for more
information.
Change-Id: Ic1f3f605a0fddf89e8f5668c7a8df30bdfb91d94
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64164
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4421
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Like on kirby, this header had a single constant in it that was actually used.
This change moves that constant inline and gets rid of the header file.
Change-Id: Ibe380396f72fddb121fb6ceb3cee24f1b9a85738
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64163
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4420
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
1. Kirby doesn't have a backlight enable GPIO on the AP since that's handled
entirely by the DP-to-LVDS bridge.
2. There is no tps65090 on the other side of the EC who's settings need to be
adjusted. If we need to turn on the LCD or backlight power manually, it will
have to be done in a different way.
3. The PMIC doesn't provide a 32KHz output for the audio codec.
Change-Id: Iadc5f3aec4818805edf3f2517da9e6fee87085dc
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63883
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4413
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The function in wakeup.c isn't applicable on kirby. The only constant in
exynos5420.h that was used was the speed of the 4th i2c bus. Instead of having
a whole header file for that one constant used in one place, the constant is
just moved inline along with the comment it had in the header.
Change-Id: I5ad50c5eeaecbbf7865d76afb31a12d36c3371ee
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63882
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4412
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: Ic78c65486816015f7574a13affc6e54acbbea73e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63875
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
... In order to do this, the graphics memory has to move into
the resource allocator and out of CBMEM.
Change-Id: I565c3d6dea747822fbabf6f3845232d4adfbf333
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63657
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
... In order to do this, the graphics memory has to move into
the resource allocator and out of CBMEM.
Change-Id: I7396da4a7068404b0d2e4d308becab4dd6ea59bb
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/59326
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4390
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
It's not needed and it's a potential problem source.
Change-Id: Ic4cafe74e7fc3a9031d852895ad7fd5e5cd64d11
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/62279
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4410
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Moved a lot of code from i915io.c to intel_dp.c with specific function calls
Change-Id: Ib2ed52b4f73ee0076e2dd68a26541e5bbe1366bc
Reviewed-on: https://gerrit.chromium.org/gerrit/63950
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/4429
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Depending upon the values decoded from edid, the function decides the appropriate bits to
be set in flags parameter (Important for fastboot to work correctly in kernel)
Change-Id: I3b0f914dc2b0fd887eb6a1f706f87b87c86ff856
Reviewed-on: https://gerrit.chromium.org/gerrit/64265
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/4423
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Also, used this attribute in the calculation of htotal and other registers
Added intel_dp_* functions for m,n registers and dimension register calculations
Change-Id: I99dd7156700d59b0b4c85e34c9aa1c6408c7f31a
Reviewed-on: https://gerrit.chromium.org/gerrit/64001
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/4422
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Works fine with all three panels with the change of 6 bits per color.
Change-Id: Ia47d152e62d1879150d8cf9a6657b62007ef5c0e
Reviewed-on: https://gerrit.chromium.org/gerrit/63762
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/4402
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Empirical testing shows that 0x5 is the optimal setting for DTLE DATA /
EDGE on Peppy.
Change-Id: I273a3a68be97b3eb7c2ee2071e5de1ef7bf7f2d9
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65717
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/4476
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The SMI handler code was setting S3 wake events when going
into S5 and enabling a key press to wake the system.
Change-Id: I6413ef1341e0149187df9f4f7e0c314d4c9e9c6e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65323
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4459
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Boot on falco and look in /sys/firmware/log for
the string "PCIe Root Port 1 ASPM is enabled"
Change-Id: Ie2111e4bb70411aa697dc63c0c11f13fbe66c8d8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65315
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4454
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
CLKOUT for PCIE ports 1-5 and CLKOUT_XDP are not used
and can be disabled.
I couldn't test this directly without a scope so instead I
used a modified commit that also disabled PCIe Port 0 and
saw that that correctly disabled the WLAN port.
Change-Id: I0f996e90f0ae42780de3a0c8dc5db00ec600748b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65251
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4451
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When the EC requests the host to throttle (for charging or thermal
related reasons) the package power consumption will be limited.
Right now this is set at 12W but that is somewhat arbitrary and may
need tuning.
1) define the THRT method in \_TZ scope for EC to call
2) enable SCI events for throttle start and stop
3) define the power limit at 12W and set it in NVS
1) Enable CONFIG_ACPI_DEBUG=y in the kernel
2) Enable the Debug object event in acpi module
acpi.debug_layer=0x7f acpi.debug_level=0x2f
3) Using EC console generate host event for throttle start
> hostevent set 0x20000
4) Check dmesg for throttle start events
ACPI: Execute Method [\_SB_.PCI0.LPCB.EC0_._Q12] (Node ffff8801002c5988)
[ACPI Debug] String [0x12] "EC: THROTTLE START"
[ACPI Debug] String [0x10] "Enable PL1 Limit"
5) Using EC console generate host event for throttle stop
> hostevent set 0x40000
6) Check dmesg for throttle stop events
ACPI: Execute Method [\_SB_.PCI0.LPCB.EC0_._Q13] (Node ffff8801002c59b0)
[ACPI Debug] String [0x11] "EC: THROTTLE STOP"
[ACPI Debug] String [0x11] "Disable PL1 Limit"
Change-Id: I39b53a5e8abc2892846bcd214a333fe204c6da9b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63989
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4416
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When the edid data structure changed a while ago, it caused hangs on snow
which were fixed by adding those missing members. Unfortunately we didn't
realize that pit needed the same fix.
Change-Id: I81780b8135b99b2e24af723e703b9befff7b5ef0
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63646
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4389
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
That speed is used with U-Boot instead of the more conservative 500 KHz.
Change-Id: Ie9d79db3b52b88c1f3bfec1745634ae6bdc9f4ee
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/63193
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4386
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Now that the rtd2132 device has the full settings the
panel timings need to be implemented. Sadly, the Tx timings
in the rtd2132 aren't 1:1 with the panel's Tx timings. Below
is the table equivalent:
RTD2132 | Falco Panel
--------+------------
T1 | T2
--------+------------
T2 | T8+T10+T12
--------+------------
T3 | T14
--------+------------
T4 | T15
--------+------------
T5 | T9+T11+T13
--------+------------
T6 | T3
--------+------------
T7 | T4
--------+------------
Change-Id: I10a3ad475d6b9485a707eb49e31afd197fc8d24d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65858
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The PWM is controlled externally from the APU.
Change-Id: Ia5130d7616991a78dfde44043a60a32cee4f145c
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/61513
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4363
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
What gets written into the parade is highly mainboard-dependent.
So the parade_writes array needs to be there.
Change-Id: Ia382d9bf1929e67b7c14d7a09f5461b71866a16b
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/61486
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4362
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When the board is in S3 and S5 the WLAN_DISABLE_L signal
can leak power into the WLAN power well since the GPIO
controlling WLAN_DISABLE_L is in the suspend well. Therefore,
drive WLAN_DISABLE_L low to avoid the power leak.
This is a clone of a Falco change:
I1a0df80dd47fdbd535aca7a9d49253794c480606.
Change-Id: I625dfbb228d1f293b880a52dfe552842d55a17d1
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63220
Reviewed-by: Dave Parker <dparker@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/4383
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
... based on the EDID detailed timing values for
pixel_clock and link_clock.
Two undocumented registers 0x6f040 and 0x6f044 correspond to link_m and link_n
respectively. Other two undocumented registers 0x6f030 and 0x6f034 correspond
to data_m and data_n respectively.
Calculations are based on the intel_link_compute_m_n from linux kernel.
Currently, the value for 0x6f030 does not come up right with our calculations.
Hence, set to hard-coded value.
Change-Id: I40ff411729d0a61759164c3c1098504973f9cf5e
Reviewed-on: https://gerrit.chromium.org/gerrit/62915
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/4381
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This code is left over from what the VBIOS did; It is redundant.
Change-Id: I321c867c81ec8b4d5e10f8b51b872cecb3082d97
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/62290
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/4380
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Turn on the pei_data flag that will instruct the reference code
binary to route all USB ports to the XHCI controller on resume and
disable the EHCI controller(s).
Change-Id: I2f2ed853a6d17f90ea524bc516f3e78079222739
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63798
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4404
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
SATA is routed to PIRQG which should be interrupt 22
and not interrupt 21. The kernel uses MSI with this
device so this is only seen when booting with pci=nomsi
Change-Id: Ic90ca2c561fc4c53ec1d395c05872222c65ff98a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63796
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4398
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Since these boards do not support C10 we should not bother
advertising that state in the ACPI _CST.
Instead use this map:
ACPI(C1) = MWAIT(C1E)
ACPI(C2) = MWAIT(C3)
ACPI(C3) = MWAIT(C7S)
Change-Id: I37eb02bf9555c74e957316a1ba9778eb2b6ee128
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62898
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/4377
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The management engine is slow, requiring at least 500ms between
when the Dram Init Done message is sent (right after memory training)
to when the MBP will report that it is successfully cleared and
that the ME can finally be sent the EOP message.
Currently this is adding 100-150ms to the boot time. If we defer
waiting for the MBP Clear indicator until the finalize step we
can gain back that lost time.
boot on falco with SMI debugging enabled to
ensure that the ME is locked down in the finalize step:
Finalizing Coreboot
SMI# #0
SMI_STS: PM1 APM
ME: MBP cleared
ME: mkhi_end_of_post
ME: END OF POST message successful (0)
Change-Id: Icab4c8c8e00eea67bed5e8154d91a1eb48a492d1
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4375
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This reverts commit ff81f50f0e4c068b64c4a5c7f5244196ecd24965.
Deferring this step until the finalize stage will allow us
to defer waiting for the MBP clear indicator and speeding
up the boot.
Change-Id: Ib8edffd06689e72875830cd68b5aedb7ac3b0559
Reviewed-on: https://gerrit.chromium.org/gerrit/62631
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4373
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The intel_ddi.c change I thought should be in but I don't see it. It just adds two functions back
that we need.
There are two new files for slippy annotated with comments about how it needs to evolve.
That said, this code has been tested on 3 different panels. Both dev and non-dev usages work.
physbase initialization to static value removed.
Moved spin calls to intel_dp_*
Change-Id: I0480af45c21c7dedcaff7e8be729f0eb554ec78a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/61136
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4370
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Peppy SPD table has 4GB configurations followed by 2GB configurations.
Current implementation does remapping to point 2GB configuration to the
same SPD index as the 4GB. This is different than Falco, which simply
duplicates the SPD data for all configurations. To simplify probing in
mosys, copy the Falco implementation of duplicating SPD data.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Idb185a437f3cf4f40d2dae1ae59c30235df8f489
Reviewed-on: https://gerrit.chromium.org/gerrit/61847
Reviewed-by: Dave Parker <dparker@chromium.org>
Reviewed-by: Jay Kim <yongjaek@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4369
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
The EC temperature sensors were renumbered and now PECI
is at index 0.
1) boot on falco
2) check /sys/class/thermal/thermal_zone0/temp
3) check 'temps' on ec console
Change-Id: Idde1457c42c80850b5b8ac22781060ed9b224d13
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61896
Reviewed-on: http://review.coreboot.org/4367
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
This may need further tuning but will start at 1.0%.
boot on falco and check /sys/firmware/log
localhost ~ # grep RTD2132 /sys/firmware/log
RTD2132: Enable 1.0% Spread Spectrum
I2C: 01:35 (Realtek RTD2132 LVDS Bridge)
Change-Id: I96e1c14dbc6a7bfaf1c8deb1806c48bf2fd3e32a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61895
Reviewed-on: http://review.coreboot.org/4366
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
The drivers in the kernel expect the devices using gpios
to generate interrupts to be edge sensitive. Make it so.
Change-Id: I920ef621682d33ba081f737e97f0239f903db2f7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61678
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4361
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0
which uses the same verb table init sequence as the southbridge.
In order to avoid two copies of the verb table loading code I
separated out the HDA verb table functions into a file that can
be re-used and then added a minihd driver to the haswell northbridge.
The minihd verb table is the same across devices so it can live
within the minihd driver rather than needing to be specified in
each separate mainboard.
I also fixed up the driver for lynxpoint HDA by following the
reference code.
Without HDMI cable plugged in driver does not find any codec,
and it does not seem to re-probe when HDMI is connected. We may
be missing kernel patches for this.
hda-intel 0000:00:03.0: no codecs found!
With a basic kernel patch to add 0x0a0c device ID to HDA driver
and with HDMI cable connected it is much happier:
snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4318
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The drivers are designed to work with an edge triggered interrupt.
Change-Id: I35a121ecfb6409bb9049f4d1e034185bb3bb7557
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61664
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4360
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When the board is in S3 and S5 the WLAN_DISABLE_L signal
can leak power into the WLAN power well since the GPIO
controlling WLAN_DISABLE_L is in the suspend well. Therefore,
drive WLAN_DISABLE_L low to avoid the power leak.
Change-Id: I1a0df80dd47fdbd535aca7a9d49253794c480606
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61421
Reviewed-on: http://review.coreboot.org/4358
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
To configure source clocks on Exynos 5420 for MMC drivers.
Some registers are different from the 5250. FSYS now has two parts
and MMC uses FSYS2. The MMC block uses MPLL as the clock source.
The "high-speed" MMC interface runs as 52MHz, so divider is set
accordingly.
Also, the MMC driver has changed from MSHCI (Mobile Storage Host Controller
Interface) to DWMCI (DesignWare MMC Controller Interface).
Change-Id: I9ba9cf43e2f2dcd9da747888c0c7676bd545177b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60858
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4354
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Make use of google_chromeec_get_board_version to determine board
version, and apply proper RAM_ID table to load correct SPD.
Change-Id: I6a2d54759cf2ce98bf53df0db396c6e09368c714
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61192
Reviewed-by: Dave Parker <dparker@chromium.org>
Reviewed-on: http://review.coreboot.org/4353
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Update peppy's verb tables for the Realtek ALC283 Audio Codec.
ALC283 Configuration:
Digital Mic - NID 12h: Disabled
Speakers - NID 14h: Enabled
Mono out - NID 17h: Disabled
Mic 1 - NID 18h: Disabled
Mic 2 - NID 19h: Headphone Jack
Line1 - NID 1Ah: Internal Mic
Line2 - NID 1Bh: Disabled
PCBEEP - NID 1Dh: Enabled
SPDIF - NID 1Eh: Disabled
HP-OUT - NID 21h: Headphone Jack
Mic 1 doesn't seem to really be available, but the documentation
refers to NID 18h as MIC1, so it's being disabled as it's not
being used. The onboard microphone has been moved to line 1.
I had my peppy modified to attach the mic to line1 and mic1 now
works with this patch. Mic2 looks harder to rework, so I think
that will have to wait for the DVT boards.
Change-Id: I7d6ce6b428806b6aed1d36e7e25302fa5ae14b21
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/58880
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4352
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
USB2 Port A set to 6.4" and Back Panel
USB2 Port B set to 5.2" and Back Panel
USB2 Port C set to 12.3" and Internal
Other devices all set to Internal.
build and boot on falco and check settings.
Based on the config settings all ports end up with
tuning param 1 == 5 and param 2 == 2
U2ECR[0] = 0x00059501
U2ECR[1] = 0x00059501
U2ECR[2] = 0x00059501
U2ECR[3] = 0x00059501
U2ECR[4] = 0x00059501
U2ECR[5] = 0x00059501
U2ECR[6] = 0x00059501
U2ECR[7] = 0x00059e01
Change-Id: I6b9e6df2679036a501355e6b389a486a6f178f99
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61297
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4350
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This CPU does not support Configurable TDP and so far does
not need to use Controllable TDP.
Change-Id: I15599cd4e6890dd5c9d9f99bc4e95307a8dcc827
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60657
Reviewed-on: http://review.coreboot.org/4347
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The is_resume comment is wrong for this board. It only applies
to the older 5250 cpu. In fact, the is_resume parameter
is not needed for ddr init and will likely be removed soon.
Change-Id: I4e3c92fcaaa75d3c9223d90acccf053f61406307
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/60103
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4342
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Some new fields were added to the edid data structure, and the edid code was
changed to put estimated values into those fields which were ultimately passed
into depthcharge or other payloads. On snow we do things different and just
declare an edid structure statically which didn't have those members. The rows
and columns of the graphics console were 0, and that confused the framebuffer
driver and made it loop forever.
Change-Id: I6ca3bd948482b347a6a981e83b82b10dca995e5e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/61057
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4341
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
- Update RAM_ID table.
- Add DEVSLP0 signal to NGFF SATA port.
Note: After this change, old Micron 2GB boards will no longer boot.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Id68a1d6ace2702cca9c37305726cd55a0bde5005
Reviewed-on: https://gerrit.chromium.org/gerrit/60167
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Dave Parker <dparker@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Reviewed-on: http://review.coreboot.org/4340
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Limit power to 12W at 73C and remove limit at 68C.
To have the CPU consume maximum power it is necessary to stress
both the CPU and the GPU. Bastion (chrome.supergiantgames.com)
and/or webglsamples.googlecode.com can be useful for this.
Testing this properly requires a script to report the running
average power readings. The watch_power.sh script is attached
to this issue in the partner tracker.
1) Run watch_power.sh continuously:
localhost ~ # watch -n 0 bash -e /tmp/watch_power.sh
2) Start Bastion (or other stress apps). The power draw should
be close to 15W if under enough load.
3) Watch until temperature climbs above 73C and is caught by
the thermal zone 10 second poll, this can be sped up by blocking
or removing the fan.
4) The ACPI thermal zone states should change to reflect that
active[2] is now enabled and power consumption should drop to 12W.
5) Stop the stress apps and wait until the CPU cools off again,
enable the fan again if it was removed.
6) The ACPI thermal zone state should switch back to active[3].
Change-Id: Ie6714a8543d4f06edf8513086fc9c968273bdb23
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60545
Reviewed-on: http://review.coreboot.org/4335
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Use a file in CBFS for keyboard layout and ethernet MAC instead
of scanning FMAP.
Change-Id: I7658c7c4e389deb20d7d8f57cce8b568efdc575d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4307
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The new edid functions support converting the edid to an lb_framebuffer.
Use them. Also, since panels seem to set bits per color instead of bits
per pixel, just force the right value in the edid struct.
Add helpful comment because people don't always believe we need to set
the pallette.
While we're at it, fix a problem that caused it to not compile.
Change-Id: I645edc4e442d9b96303d9e17f175458dc7ef28b6
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/57619
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald G. Minnich <rminnich@chromium.org>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4327
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Don't force dev mode. Allow users to enter / exit dev mode as normal.
Change-Id: I168eb04a8ac102a8c4a1ca8936f78f62b001e0eb
Reviewed-on: https://gerrit.chromium.org/gerrit/59492
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Dave Parker <dparker@chromium.org>
Reviewed-on: http://review.coreboot.org/4321
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
On some systems there may be 2GB SKU that is the same as the
4GB SKU but just one channel of memory. In that case we need
to ensure that both copies of the same SPD source end up
populated by ensuring that repeated entries are included by
using $+ instead of $^.
Alternatively we could do the check inside romstage, but it
is already set to behave this way if the SPD gets populated
correctly.
I changed spd_index to 3 in falco romstage to force it to
pretend it was a 2GB config of the same memory, then booted
to ensure it was indeed limited to 2GB.
memcfg channel[0] config (00780008):
ECC inactive
enhanced interleave mode on
rank interleave on
DIMMA 2048 MB width x16 single rank, selected
DIMMB 0 MB width x16 single rank
memcfg channel[1] config (00600000):
ECC inactive
enhanced interleave mode on
rank interleave on
DIMMA 0 MB width x8 single rank, selected
DIMMB 0 MB width x8 single rank
Change-Id: Ibfe5051ccda2fe69e8caff3f3c264116e3411c65
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59483
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Jay Kim <yongjaek@chromium.org>
Reviewed-on: http://review.coreboot.org/4319
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The OIPG package needs to have >1 member to make the chromeos_acpi
kernel driver do the right automagic sysfs topology creation.
Additionally an "unimplemented" GPIO should be reported as 0xFF
because 0 is a valid GPIO number.
verify crossystem on slippy
$ sudo crossystem | grep -e recoverysw_cur -e wpsw_cur
recoverysw_cur = (error)
wpsw_cur = 1
Change-Id: I06dff09152bde30a3ffe58b1defe9d299155472c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57471
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4221
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This config option was not enabled which was preventing
the user from enabling developer mode from recovery mode.
With this enabled we can disable the "dev mode by default"
behavior and let people enable it by entering recovery mode.
This will make the firmware behave like a typical chromeos
device.
Peppy is left in "default dev mode" until after bringup.
1) boot slippy in normal mode by default
2) enter recovery mode with servo button
3) Ctrl+D on USB keyboard to enter developer mode
4) boot slippy in developer mode
Change-Id: I414c0d10dd0489e3c89798f75a2872a43297c8d8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57350
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4220
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Those building Chromebook firmware from coreboot git might be more
interested in building without ChromeOS extras.
Change-Id: I2f176d059fd45bf4eb02cc0f3f1dcc353095d0ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3977
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
- Add a new USB location field
- Add a new "ddr_refresh_2x" field, enabled on Falco only
- Fix copy+paste bug in baskingridge
Checked that tREFI is halved during memory setup in the memory
training log:
tREFImin = 6240 << DEFAULT
C(0).tREFI = 0xc30 << MODIFIED (=3120)
C(0).tREFI = 0xc30 << MODIFIED (=3120)
Also ensure that the SD card is detected properly again.
Change-Id: Ie3a82c08df06ada9af56282b5255caefa56487f2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57349
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4219
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These are based on the datasheet and I included the timing
values I used from the docs.
Change-Id: Ib75b2c5e50ac09d1e4cf9dd22229bb0f0a8965a4
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58540
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4234
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Currently, all Peppy boards w/ '000' SPD GPIOs have 2GB DRAM. Disable
the second DRAM channel based upon the GPIOs.
Need to change / confirm this for upcoming builds.
Change-Id: I7085ddecb80626cc0bed99ba7b174c6b80350696
Reviewed-on: https://gerrit.chromium.org/gerrit/58620
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4238
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The EC was disabling flash commands and sysjump was not working
properly. With those two fixed software sync works properly.
(Taken from I63ca00d6c94854f2b395eb736ce20792da5f8de2).
Change-Id: I9c7d1d1f1aaf7de33d0cec5f6daf648576ba8900
Reviewed-on: https://gerrit.chromium.org/gerrit/57289
Reviewed-by: Dave Parker <dparker@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4212
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
A quirk of the Kconfig used in coreboot is that config options
cannot be overriden by local config changes unless they have
a description string.
1) Add CONFIG_MAINBOARD_VENDOR="Custom" to local config
2) Build and flash coreboot
3) cat /sys/class/dmi/id/sys_vendor and look for "Custom"
Change-Id: I1b5f2124cd4a22c056c025143ae5bcaafa6b03f0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59088
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4248
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The wake device input pins are active low and the
GPIOs need to be set as inverted when they are marked
as an input so they are not spuriously logged.
Also sync pin states from Falco initial commit.
Reference change: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323
Change-Id: I66e136d389d53a367436d816fa84dacdc8e86bad
Reviewed-on: https://gerrit.chromium.org/gerrit/58334
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Dave Parker <dparker@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@google.com>
Reviewed-on: http://review.coreboot.org/4247
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Set nid 0x12 instead of nid 0x05. The DMIC is on NIC 0x12.
Change-Id: Ifc883b65a50aeec6a6d3ad02fe8418f124e6241d
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58711
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Jay Kim <yongjaek@chromium.org>
Tested-by: Jay Kim <yongjaek@chromium.org>
Reviewed-on: http://review.coreboot.org/4246
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
SPD GPIOs were being read prior to initialization in romstage_common. To
fix, pass the copy_spd function to romstage_common, to be called at the
appropriate time (after PCH init, before DRAM init).
Change-Id: I2554813e56a58c8c81456f1a53cc8ce9c2030a73
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58608
Reviewed-on: http://review.coreboot.org/4237
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The wake device input pins are active low and the
GPIOs need to be set as inverted when they are marked
as an input so they are not spuriously logged.
suspend/resume on slippy with trackpad wake:
8 | 2013-05-29 07:43:14 | ACPI Enter | S3
9 | 2013-05-29 07:43:18 | ACPI Wake | S3
10 | 2013-05-29 07:43:18 | Wake Source | GPIO | 12
and with power button wake:
11 | 2013-05-29 07:43:35 | ACPI Enter | S3
12 | 2013-05-29 07:43:40 | EC Event | Power Button
13 | 2013-05-29 07:43:40 | ACPI Wake | S3
14 | 2013-05-29 07:43:40 | Wake Source | Power Button | 0
Change-Id: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56940
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4209
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Make the declaration and use of it conditional on the ELOG_GSMI Kconfig variable.
Change-Id: I2ef291d2f3e7d35545014e03ba8e0045da6050e5
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3987
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
