To maintain consistancy with southbridge/amd/agesa/hudson rename
pi/avalon to pi/hudson in advance of adding support for the
base hudson southbridge.
Change-Id: Icff8c4c06aae2d40cbd9e90903754735ac3510c3
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8251
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
These were probably accidentally missed when the move
from southbridge/amd/agesa/hudson to amd/pi/avalon occured.
Change-Id: I4cf6e2f8b25899d6d342452cb1b15e694dae35c8
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Control bits located by changing tristate power
restoration value in proprietary BIOS, booting into
Linux, dumping the entire CK804 configuration space,
then comparing values against those dumped earlier.
"Last state" control bit(s) are unknown at this time.
TEST: Boot ASUS KFSN4-DRE with both coreboot power on
and power off after power failure settings, then
pull power plug / reinsert power plug and verify
mainboard behaviour matches setting.
Change-Id: I737bdd35632fe786968a1cb8458e56c785363cfa
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8258
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Put functions in appropriate pre-processor sections to avoid
false-positive 'unused function' compiler warnings.
Change-Id: Ie4955ee9df6904c38848f46226b53be37d9fa239
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8157
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the southbridge code to use printk() on all non-ROMCC
boards.
Change-Id: I312406257e66bbdc3940e206b5256460559a2c98
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8110
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Somewhere along the line, the sb_cfg parameter name was changed to
config, but this wasn't carried into the documentation or the function
prototypes everywhere.
Change-Id: Iccb0829c2f50370dddb70af915a6759316c4727a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8098
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
These files were trying to document the parameters, but didn't have
the syntax quite right. Change the comments from @varname to
@param varname as required by doxygen.
Change-Id: I63662094d3f1686e3e35b61925b580eb06e72e28
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8100
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These comments are left over and are not relevent in the coreboot
code, but created a new section titled "Release Content" in the
doxygen documentation produced by the coreboot code. In an effort
to clean up the output, I'm removing these doxygen comments.
Change-Id: I4d7be3313a2ab6c140b4f3afe70dffc4abba7bca
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8069
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Cherry-pick from chromium and adjusted for added boards
and changed directory layout for arch/arm.
Timestamp implementation for ARMv7
Abstract the use of rdtsc() and make the timestamps
uint64_t in the generic code.
The ARM implementation uses the monotonic timer.
Original-Signed-off-by: Stefan Reinauer <reinauer@google.com>
BRANCH=none
BUG=chrome-os-partner:18637
TEST=See cbmem print timestamps
Original-Change-Id: Id377ba570094c44e6895ae75f8d6578c8865ea62
Original-Reviewed-on: https://gerrit.chromium.org/gerrit/63793
(cherry-picked from commit cc1a75e059020a39146e25b9198b0d58aa03924c)
Change-Id: Ic51fb78ddd05ba81906d9c3b35043fa14fbbed75
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8020
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Correct the param to match the functions.
Change-Id: Id002c549a6ba6a7be4fa5eee396769eaa2510698
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8074
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This patch has a rather twisted history. It was originally split off
from a chromium patch, which moved ALTCENTURY to Kconfig. However,
since we have no user without ALTCENTURY, we've agreed that the best
way to proceed is to eliminate the non-ALTCENTURY case entirely.
The old commit message and identifiers are kept below for reference:
The availability of "ALTCENTURY" is now set through a kconfig
variable so it can be available to the RTC driver without having to have a
specialized interface.
BUG=None
TEST=Built and booted on Link with the event log code modified to use the RTC
interface. Verified that the event times were accurate.
BRANCH=nyan
Original-Change-Id: Ifa807898e583254e57167fd44932ea86627a02ee
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197795
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
This is the second half the following patch.
(cherry picked from commit 9e0fd75142d29afe34f6c6b9ce0099f478ca5a93)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8e871f31c3d4be7676abf9454ca90808d1ddca03
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7987
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
These are not wrappers for AGESA as they do not enter vendorcode at all.
We expect most of the added fixme.c file to be written without use of AMDLIB.h
and parts relocated as northbridge enable_resources().
Change-Id: Iba6d59e2a7672349208e9a65fcd2cb1094ab7d50
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7815
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The new AMD PSP and SMU BLOBs currently have fixed sizes in the
southbridge Makefile. Future PSP and SMU updates may require more
space and thereby cause the make to fail with cryptic error messages.
Change the makefile to compute CBFS locations and the corresponding
PSP pointer table entry values based on the actual file sizes.
Additionally, the FWM directory has expanded to 4096 bytes. The
Avalon makefile is modified to zero-pad the FWM directory using
the "dd" system command.
There is dead code in the makefile to allow hardware validated boot
ROMs, but the option is hard-coded to be disabled. Remove the HVB
dead code.
Change-Id: I4705cede8ed001a71bb4f49598444255c9609d52
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/7726
Reviewed-by: Marshall Dawson <marshall.dawson@se-eng.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Along with the spelling fixes, it was requested that I correct this
comment. Updating "LocateImage() take minutes" to
"LocateImage() takes minutes" everywhere that comment occurs.
Change-Id: I28cd47476cb42ba3e404e064695a7fd97d581834
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7848
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This one is special because qemu is really far from anything real but
shares some common features.
Change-Id: Ia1631611724a074780e1fece50166730b2ee94ae
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6939
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
.. and also drop the northbridge and southbridge used by the board.
This is one of the last boards to not use ROMCC for romstage. Let's
get rid of it.
Change-Id: I0a864b2c4ce3eeb7d3e199944eedef0cd71a85e6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7853
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There is no Cache As Ram for these boards, let's get rid of them.
Also drop unused dependencies
Change-Id: I94782da521c32ade7891ada29d3013cbab32a48b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7836
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This ensures that SPI is ready when eventlog code is used.
x86 platforms which use eventlog invoke elog_clear() in GSMI and
elog_add_event_raw() when deciding the boot path based on ME status.
For the SMM case spi_init() is called during the finalize stage in
SMM setup. For the boot path case we can call spi_init() at the
beginning of BS_DEV_INIT and it will be ready to use when the boot
path is determined from the ME status.
BUG=none
BRANCH=none
TEST=tested on Link (bd82x6x), Beltino (Lynxpoint), and Rambi
(Baytrail) with follow-up patch
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id3aef0fc7d4df5aaa3c1c2c2383b339430e7a6a1
Original-Reviewed-on: https://chromium-review.googlesource.com/194525
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 173d8f08e867bab8c97a6c733580917f5892a45d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifaed677bbb141377b36bd9910b2b1c3402654aad
Reviewed-on: http://review.coreboot.org/7756
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I5a5af71ea49152accd92dc331a19e57f3717e4ff
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7841
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I5d2d4ba098d2a95f7643f000f4b48b3349a8e6cf
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7839
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: Ice5d8ce9408356c866a9a2ee5a03f704f55ddc2a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7842
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I31333742d9c90cf6d7ae3d2f324880ed53807d7f
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7840
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There is no Cache As Ram for these boards, let's get rid of them.
Change-Id: Ib41f8cd64fc9a440838aea86076d6514aacb301c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7117
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
There is no need to call cbmemc_reinit() exclusively in romstage,
that is done as part of the CAR migration of cbmem_recovery().
CBMEM console for romstage remains disabled for boards flagged with
BROKEN_CAR_MIGRATE, but with this change it is possible to have it for
ramstage.
Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7592
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
It appears the decimal value was used instead of the hexadecimal value.
Apply commit 59919ad1 (southbridge/amd/agesa/hudson: Correct incorrect
#define) to AMD Avalon, whose `pci_devs.h` was copied from AMD Hudson.
The incorrect define was introduced in commit 2093c4f7 (AMD/agesa: Add
functions for AMD PCI IRQ routing).
Change-Id: I7ccc060e8fa032080375259c3b11d39e2deb8e9e
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7800
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
It appears the decimal value was used instead of the hex value.
Change-Id: I04acde9e5b2a9e08ed01b0564c3d561b0385a392
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7799
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
They were only used internal to the SPI drivers and, according to the comment
next to their prototypes, were for when the SPI controller doesn't control the
chip select line directly and needs some help.
BUG=None
TEST=Built for link, falco, and rambi. Built and booted on peach_pit and nyan.
BRANCH=None
Original-Change-Id: If4622819a4437490797d305786e2436e2e70c42b
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/192048
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1e2deecd9d8c6fd690c54f24e902cc7d2bab0521)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ida08cbc2be5ad09b929ca16e483c36c49ac12627
Reviewed-on: http://review.coreboot.org/7708
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
spi_set_speed was never implemented, and spi_cs_is_valid was only implemented
as a stub and never called.
BUG=None
TEST=Built for rambi, falco, and peach_pit.
BRANCH=None
Original-Change-Id: If30c2339f5e0360a5099eb540fab73fb23582905
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/192045
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 98c1f6014c512e75e989df36b48622a7b56d0582)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iebdb2704ee81aee432c83ab182246d31ef52a6b6
Reviewed-on: http://review.coreboot.org/7707
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Correct mask to select bits 4-6 inclusively as per comment and use
bitwise operations while working with bits. Be sure to write back out
the data on the retrain.
See:
commit cab9efb2 southbridge/amd/rsXY0/cmn.c: Fix bitwise logic and mask in loop
Change-Id: I95d1799514157b7849f3e473837aaf2fd9bd59b9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7692
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
- In '-ffreestanding' main() is just as any other function and so
it needs a type-signature. Fixes a clang warning.
- Bay Trail and Rangeley have the updated romstage.c with the code
moved into the chipset, put the prototype in romstage.c.
- The sandybridge code has not been updated, so the prototype
for it goes into chipset_fsp_util.h, next to the prototype for
romstage_main_continue.
- Correct the return value of baytrail main() from void * to void
and remove the unnecessary asmlinkage tag. I'm surprised that this
didn't generate a warning...
Change-Id: I85ac0797d1e55d2b7ffdca039a52820d7827e704
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7724
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Silence some useless Clang warns in this case.
Change-Id: I202a85f7dec52c65d80e2bc56f7d9e4eb3e61d48
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7696
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Don't build in non-essential blobs by default. However, if the user
selected to use the blobs repository, then default to including the
blobs.
Change-Id: Ie90f00d7c18d725f24fe1503fadaf098d3cefa4a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7638
Tested-by: build bot (Jenkins)
Otherwise checksum may not work correctly on early stages.
For compatibility with old bootblocks also enable it early in romstage.
Change-Id: Ie541d71bd76af182e445aa5ef21fe5ba77091159
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7556
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GPP config from devicetree.cb is not implemented for fam15tn/fam16kb.
Also only for asus/f2a85-m the configuration value matched the actual
programming.
Change-Id: Ic7a9aa1360f4ba35d202f3f7dd1fc3c20a52dde0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7600
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Change-Id: I2adb5a8fe2cede988cc6fdef5ff81da86d267175
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7624
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There were instances of unneeded arch/hlt.h includes,
various hlt() calls that weren't supposed to exit (but
might have) and various forms of endless loops around
hlt() calls.
All these are sorted out now: unnecessary includes are
dropped, hlt() is uniformly replaced with halt() (except
in assembly, obviously).
Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7608
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM.
See commit a0b4a8d.
Change-Id: Iae82498ab729df5682d89e66bb9de96457e91619
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7465
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
It's always true for this chipset.
Change-Id: Icd7666ed361c33170b1171da9ec46547685b996e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7571
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
According to spec IRQ1 isn't available for PIRQ assignment.
Has gone unnoticed probably because modern OS use MSI or
at least APIC and even with noapic don't use IRQ1 with PCI
IRQs.
Change-Id: Idc7db249007df629b27e8cae41cc80358d5306f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7478
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
On those chipsets the pins are just a legacy concept. Real interrupts are
messages on corresponding busses or some internal logic of chipset.
Hence interrupt routing isn't anymore board-specific (dependent on layout) but
depends only on configuration.
Rather than attempting to sync real config, ACPI and legacy descriptors, just
use the same interrupt routing per chipset covering all possible devices.
The only part which remains board-specific are LPC and PCI interrupts.
Interrupt balancing may suffer from such merge but:
a) Doesn't seem to be the case of this map on current systems
b) Almost all OS use MSI nowadays bypassing this stuff completely
c) If we want a good balancing we need to take into account that e.g.
wlan card may be placed in a different slot and so would require complicated
balancing on runtime. It's difficult to maintain with almost no benefit.
Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7130
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Avalon support now lives under pi/avalon so we can restore Hudson
to the state before it was added there.
Change-Id: Id96973f3458fae162232c160e602595b58c43027
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7389
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
To backport features introduced with recent Chromebooks and/or Intel
boards in general, heavy work on the AMD AGESA platform infrastructure
is required. With the AGESA PI available in binary form only, community
members have little means to verify, debug and develop for the said
platforms.
Thus it makes sense to fork the existing agesawrapper interfaces, to give
AMD PI platforms a clean and independent sandbox. New directory layout
reflects the separation already taken place under 3rdparty/ and vendorcode/.
Change-Id: Ia730f0e45e7c1bdfc0c91e95eb6729a77773e2b9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7388
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
To backport features introduced with recent Chromebooks and/or Intel
boards in general, heavy work on the AMD AGESA platform infrastructure
is required. With the AGESA PI available in binary form only, community
members have little means to verify, debug and develop for the said
platforms.
Thus it makes sense to fork the existing agesawrapper interfaces, to give
AMD PI platforms a clean and independent sandbox. New directory layout
reflects the separation already taken place under 3rdparty/ and vendorcode/.
Change-Id: Ib60861266f8a70666617dde811663f2d5891a9e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7149
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
As build.h is an auto-generated file it was necessary to add it as
an explicit prerequisite in the Makefiles. When this was forgotten
abuild would sometimes fail with following error:
fatal error: build.h: No such file or directory
Fix this error by compiling version.c into all stages.
Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7510
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This implementation is more compact, unified and works with windows as well.
Tested under windows and under Debian GNU/Linux.
Change-Id: I585dec12e17e22d829baa3f2dc7aecc174f9d3b5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7296
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
There are too many differences, and calculating relatively
large integer using floats might not be the brightest idea
anyway.
Also avoid relying on ls(1) output format to determine file sizes.
Change-Id: I5f96c036737b74e20f525c3dc9edc011ad403662
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7447
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Do all the handling in SB code with few parameters from devicetree.cb
instead of having mobo callbacks.
Change-Id: I8fd02ff05553a3c51ea5f6ae66b8f5502509e2bc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7199
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Correct mask to select bits 4-6 inclusively as per comment and use
bitwise operations while working with bits. Be sure to write back out
the data on the retrain.
Change-Id: I26e7acddbff32e978c2bf984c21d9a63337067f8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Found-by: Clang
Reviewed-on: http://review.coreboot.org/6147
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
IMC fan control should be enabled after OS launched.
I have tested on OliveHill and Parmer with Windows 7 and Ubuntu 13.10.
Change-Id: I16d6ff6b1272d16b840e803e0a95f6e363c79704
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/7165
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The fan can stop but can't run again. "AGESA: Call get_bus_conf() just
once" (commit ef40ca57) results to this problem.
This patch can resolve this problem.
Change-Id: I1b5bf3f6f7a66c60743f78918dc5442cdfc8b6e4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6981
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Most of the code related to the mc146818 is not related to the RTC and is
really for managing the CMOS storage. Since we intend to add a generic API
for RTC drivers it's inconvenient for those functions to have an rtc_ prefix.
This CL renames those functions so they start with cmos_ instead. There are
some places where rtc_init was called with a comment that says something about
starting the RTC. That wasn't correct before (the RTC is always running), but
it looks a little odd now that the function is called cmos_init.
This CL also opportunistically cleans up some style problems in this file.
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197794
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788)
Removed the addition of stdint.h to mc146818rtc.h since
types.h is now included. Changed rtc_init to cmos_init for
fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex.
Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6977
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Just took combined sandybridge per-device ACPI patch and applied it
on FSP flavour to avoid need of separate tests.
Change-Id: I09838cc01ede504416078edcb1c267a11539e714
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
A cast did not work for me, but this variable did.
This is one of the many issues with building e3501 I'm
running into.
Change-Id: Ifb19a17770604f2d63dfef762d08200add77ee34
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7122
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Two issues:
1. without config, there were two NULL derefs
2. output for "Secondary" looked at ide0_enable
Change-Id: I34ddbc0f9b27226981ccbc237e3d59e522076d55
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6989
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Native raminit for sandy/ivybridge was introduced in:
7686a56 sandy/ivybridge: Native raminit.
An additional current level is needed.
Change-Id: Ied73d168045c25d37afa5d9d7073de7f9c6435c7
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7098
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
This patch adjusts the read timeout in order to support flash chips
which needs more than 60ms to complete a spi command.
This problem can be reproduced on a Thinkpad T520 with M25PX64 spi chip ( suspend to ram bug ).
Change-Id: I22b2e59f1855ead6162a292b83b9b854b55c0235
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7105
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.
Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Windows chokes if it's not the case.
Change-Id: I3df15228ed00c3124b8d42fc01d7d63ff3fe07ba
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7017
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
According to ACPI spec all SSDTs should have distinct OEM table ID.
We end up with 2 SSDTs named "COREBOOT". Fix this.
Change-Id: I01bccb72758baf51c6b4263778716f4bb9d438c9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7016
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
We have no good reason to be handling the TCO timeout
as an SMI since we aren't doing anything special with it
and clearing the status in the handler prevents the reboot
from actually happening.
Change-Id: I074ac0cfa7230606690e3f0e4c40ebc2a8713635
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180672
(cherry picked from commit 608a2c5768e9300c81b7c72fb8ab7a0c7c142bec)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6907
Tested-by: build bot (Jenkins)
X230 has 12 MiB flash. SPI controller supports up to 2 x 16 MiB of flash
but address map limits this to 16MiB.
Change-Id: Icc39c3c8d45d2d14e437bdfce920f8b4b039789d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5133
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
SMI1 is being written to but never read from.
Change-Id: I82c0800713e3093eb1317b5e1f6f228771134857
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6808
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
00730F01 contains the Avalon southbridge and a Platform Security
Processor (PSP). Supporting the PSP requires specific binaries to
be included in the ROM. The fletcher utility is used to sign PSP
binaries.
The IMC access routines are not accessible for newer AMD parts that
use pre-compiled AGESA. Change the Hudson code such that the IMC
code is not compiled if IMC is not selected in Kconfig.
Disable compilation of resume.c if HAVE_ACPI_RESUME is disabled.
The newer AMD mainboards will initially be released without ACPI
resume support (S3) due to the use of AGESA internals in the
existing Hudson routines. The Makefile change allows newer
mainboards to avoid the API issues.
Change Kconfig such that the FWM flag is always set for PSP-enabled
parts. This has the side effect of forcing the generation of the
FWM directory in the absence of GEC, IMC, and xHCI.
Change-Id: I6d056f54b60a64300841599490b9fafd561c4a7d
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6677
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
This matches what was done on baytrail in commit bfca984b -
soc/intel/fsp_baytrail: set up for including irqroute.h twice
irq_helper.h intentionally gets included into irqroute.asl twice - once
for pic mode and once for apic mode. Since people are used to seeing
guard statements on the .h files, add the guards to irqroute.h and add
a comment to irq_helper.h explaining why they aren't there.
Change-Id: I709f9370ce7db1b3ffac2297aeaba5cc670ec20c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6606
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Both 'SbSpiSpeedSupport' and 'UsbRxMode' are uninitiated upon return from
a 'sb800_cimx_config()' call.
Change-Id: I32237ff97fafc3e69627d427e54268dcb039e12c
Found-by: Coverity Scan
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6474
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Also move it to NB to be in line with other.
Change-Id: Ibd961d60dcd686899f34f6a494c14ff9d65e618b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6625
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The GPIO controller uses IRQ14 as an active high level triggered
source for GPIOs that are configured to trigger shared interrupt.
This was also tested on bolt by configuring the touchscreen to use
a shared GPIO interrupt:
localhost ~ $ grep atmel_mxt_ts /proc/interrupts
54: 24 188 93 124 LP-GPIO-demux atmel_mxt_ts
Change-Id: I3765120112bae11407e5b2020399d0d0b8e3cef8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171901
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 63a0c80ce5a19410d0608fede5a9fe0ec1c8e5c1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6541
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
As a follow up to #6479 (63e1948643),
fix the remaining faulty loop.
Change-Id: I2c77efe620c71e939f4d74e48f90a166c782e5f5
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6569
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Some copy-pasta snuck in that reintroduced an error
already fixed in #3435 (62f8083dfd)
Change-Id: I47db23e88fa09c73b4cf3e99fe2d0ed2ac30fd80
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6479
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This adds the southbridge initialization pieces for Intel's Atom C2000
processor (formerly Rangeley). It is intended to be used with the Intel
Atom C2000 FSP and does not contain all of the pieces that would
otherwise be required for initialization.
Change-Id: I416e85bd6e9c9dcf79f97785074135902fdd18b7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/6370
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Found by Cppcheck 1.65. Fixes:
(warning) Variable 'processor_name_string' is reassigned a value before the old one has been used. 'break;' missing?
(warning) Variable 'rsize' is reassigned a value before the old one has been used. 'break;' missing?
Change-Id: I4a5c947fd5cc5797eb026475ec7036bc5eaf58db
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6372
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Needed to be able to choose convenient usbdebug port.
Change-Id: I84b304f0f8fa79cc8d4a136ee6d78dc7659601c9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6410
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Based on damo22's work and my X230 tracing.
Works for my X230 in a variety of RAM configs.
Also-By: Damien Zammit <damien@zamaudio.com>
Change-Id: I1aa024c55a8416fc53b25e7123037df0e55a2769
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5786
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Found by Cppcheck 1.65. Fixes:
[src/southbridge/dmp/vortex86ex/southbridge.c:498]: (error) Array 'rtc[7]' accessed at index 7, which is out of bounds.
[src/southbridge/dmp/vortex86ex/southbridge.c:498]: (error) Array 'bin_rtc[7]' accessed at index 7, which is out of bounds.
Change-Id: I8939fe1b326202bbe2784639b0e591f8ee470eeb
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6375
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Andrew Wu <arw@dmp.com.tw>
Control for XHCI was split to handle AMD_INIT_RESET in agesawrapper
while AMD_INIT_ENV was already handled as part of BiosCallouts.
OEM configuration is supposed to be implemented as part of BiosCallouts,
leaving agesawrapper agnostic of platform details.
TODO: S3 resume for XHCI1.
Change-Id: Id5e9c25a227db4d821f1be4b176470547ca4ea84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6241
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Fixed spelling and added empty lines to separate the help
from the text automatically added during make menuconfig.
Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6313
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Currently `IFD_BIN_PATH` is shown twice. Commit 5218e616
(intel/lynxpoint: Allow building without IFD (descripter.bin)) [1]
accidentally added the option another time.
So fix up the commit and remove one of the two options `IFD_BIN_PATH`.
Keep the one which depends on `!HAVE_IFD_BIN` and is around the IFD
options.
[1] http://review.coreboot.org/6046
Change-Id: Id46f01ab8ee2e752e337e687a2ef0dfa374f44a5
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6269
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Only yangtze has longer FIFO in SPI controller. This was overlooked
in commit
9f0a2be AMD SPI: Optimise for longer writes
which broke SPI writes and caused CBFS errors with fam15tn.
Change-Id: I821e3f1fa186d2383b30eab9c5d52797c2ef22c5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6273
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Move SB900 call to match comments and changes already made for
family14 et al.
Change-Id: I22aa0bbeeabf9cff929c49c23014005bc3d53ccb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6238
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Followup deals further with Fam15 case. For unknown reasons calls
were commented out for amd/dinar and they remain that way.
Change-Id: Ie0a25fbb6f5378019fbf0f19a02acf024d79817e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6237
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Leave it to the implementation of flash->write() to split the writes
to match SPI controller and SPI flash part restrictions. This allows
for some optimisation for auto-address-increment (AAI) commands.
Kconfig AMD_SB_SPI_TX_LEN can be kept as local.
Change-Id: I4a8bc55ab7eb0eeda8f25003a8f5ff2a643ab7a7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6164
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
SPI controllers in Intel and AMD bridges have a slightly different
restriction on how long transactions they can handle.
Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6163
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This change makes it possible for vboot to avoid an
exploit that could cause involuntary switch to dev mode.
It gives depthcharge/vboot some information on the
type of input device that generated a key.
BUG=chrome-os-partner:21729
TEST=manually tested for panther
BRANCH=none
CQ-DEPEND=CL:182420,CL:182241,CL:182946
Change-Id: I87bdac34bfc50f3adb0b35a2c57a8f95f4fbc35b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/182357
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
Tested-by: Luigi Semenzato <semenzato@chromium.org>
Commit-Queue: Luigi Semenzato <semenzato@chromium.org>
Reviewed-on: http://review.coreboot.org/6003
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This will make USB keyboards connected to USB3 ports work
in libpayload on Beltino.
BUG=chrome-os-partner:23396
BRANCH=none
TEST=Use USB keyboard on Beltino in dev mode screen
Change-Id: I70b03d733bd9e4c8be5673b48bd2196effa8a5e7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/173640
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
[pm: rebase to master branch of coreboot upstream]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6018
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When USB3 devices are attached while in suspend, or two USB3 devices
that are both plugged in are switched to the other port while in
suspend the kernel does not seem to notice this -- despite the cold
attach status bit. This results in the devices showing up in the USB
list at the old enumerated device numbers and higher layers continuing
to think they are present but not reseponding.
With the kernel workaround to deal with devices that are logically
disconnected it is possible for firmware to send a warm port reset to
devices that are in this state and then the kernel will see them disappear
and handle it properly.
This same issue exists in the EFI firmware on the Whitetip Mountain 2
reference board so it is not specifically a coreboot bug. If this
behavior is fixed in the kernel then this workaround could be removed
since it is in RW firmware.
BUG=chrome-os-partner:22818
BRANCH=falco,peppy,wolf,leon
TEST=manual:
1) attach two USB3 devices
2) suspend system
3) switch the ports that the USB3 devices are attatched to
4) resume system
5) confirm that the devices are re-enumerated and come up properly
Original-Change-Id: Ifba3ffc94a06dc0b2436d7d7d464d824657362af
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 203d200268f4af6445224962190cbc66ad2a83e4)
Change-Id: I54fd2847ee25a60f25c2cefebdc1a3c18455464a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170579
[pm: rebase to master branch of coreboot upstream]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6017
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
I have been attempting to work around USB3 issues that appear in the
kernel with hacks in the firmware, but this is resulting in more
headaches in the kernel.
Instead remove all the work that was being done at resume time and undo
the change that was issuing a warm reset to all ports at suspend time.
The bad device behavior will be dealt with at the kernel level to
handle devices that get stuck in polling state after enable/disable
sequence.
BUG=chrome-os-partner:22754
BRANCH=falco,peppy,wolf,leon
TEST=manual:
suspend/resume with several misbehaving devices:
Kingston USB3 Media Reader
Transcend USB3 Media Reader
Various ADATA USB3 drives
Various Kingston USB3 sticks
Original-Change-Id: I0894454af42d2ced456fe0da921d74c9e74902d0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170107
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c2abb4d0dad6ed00e1e230d604c4c0a76eb4eef7)
Change-Id: Ib215d9c230f90a1c9f34bf29254bb9feec28c67e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170578
[pm: rebase to master branch of coreboot upstream]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Remove some ASCII art past 80 columns.
Change-Id: I00ad79f2e1ddd78935efcfab19d9e166f0349ae3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6155
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
If one commented out HAVE_ACPI_RESUME in Kconfig file for a board
using agesa/hudson the build failed.
Change-Id: Ifbad8f6e23ce4b5431e596bf67e6ab108fedb4ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6253
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Tested-by: build bot (Jenkins)
Whenever spi_xfer is called and whenver it's implemented, the natural unit for
the amount of data being transfered is bytes. The API expected things to be
expressed in bits, however, which led to a lot of multiplying and dividing by
eight, and checkes to make sure things were multiples of eight. All of that
can now be removed.
BUG=None
TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI
errors in the firmware log. Built for rambi.
BRANCH=None
Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192049
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6175
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The spi_flash_probe and and spi_setup_slave functions each took a max_hz
parameter and a spi_mode parameter which were never used.
BUG=None
TEST=Built for link, falco, rambi, nyan.
BRANCH=None
Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192046
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6174
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This is needed to successfully build fox_wtm2 from external repo.
BUG=chrome-os-partner:18638
BRANCH=none
TEST=manual: successfully compile coreboot for fox_wtm2 and
create an image with chromeos-bootimage/cros_bundle_firmware
Change-Id: Iaa4e9983faa1d86c2b29d8fd4f577be035497e38
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48676
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4132
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Some USB3 devices are not showing up after suspend/resume cycles.
In particular if a device uses a lower power state like U2 it may
take longer to come up and the firmware needs to wait after sending
a warm port reset.
In addition skipping port reset to connected ports in the way into
suspend was causing problems so instead send all ports a reset
before suspend.
BUG=chrome-os-partner:22402
BRANCH=falco,peppy,leon,wolf
TEST=manual:
Suspend/resume with ADATA HE720 HDD (and other devices) both
connected at suspend and connecting while in suspend and ensure
that the devices always show up in the kernel.
Change-Id: Ib7b15dc65792742b4ceb7dcfc4b2c83192eafcc2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169548
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6015
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In order to enable a Super I/O in non Chrome EC systems we
need to make pch_enable_lpc() available to the mainboard
romstage.c
BUG=none
BRANCH=none
TEST=boot ChromeOS on Beltino
Change-Id: I34e7d23012e1852c69e82ba7cdc81a05751846de
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172180
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/6019
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Add the chip option to disable SATA DEVSLP. This disables
the SDS bit in the SATA CAP2 register.
BUG=chrome-os-partner:23186
BRANCH=leon
TEST=Manual: System runs without SATA failure for more than 10 hours
Original-Change-Id: I8baa40935421769aeee341a78441fb19ecaa3206
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: https://chromium-review.googlesource.com/174648
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 49d25812b04a983d687a53a39530559ba99fd9b4)
Change-Id: Iac0b32f80958f5ffb571733484dc931bee216f55
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: https://chromium-review.googlesource.com/176352
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/6013
Tested-by: build bot (Jenkins)
This will allow the legacy mode boot path to leave USB
ports routed to EHCI so they can be used by SeaBIOS.
BUG=chrome-os-partner:22085
BRANCH=falco,peppy
TEST=manual: Build and boot from USB and SeaBIOS on falco
Change-Id: I46870eccd1b846dc8a7f8d7948969c8e623e18cd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66547
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6011
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Current build configuration always wants to include an Intel Management Engine
(ME) firmware (`me.bin`) on Intel Lynx Point systems. However, we can have a
working coreboot without it, as long as the factory delivered ME firmware is
kept untouched in the flash ROM. So let the user decide if a ME firmware will
be included in the build by introducing the Kconfig option `HAVE_ME_BIN`.
The same was done in commit 99fd30e4 (sandybridge: Make inclusion of me.bin
optional) [1] for Intel Sandy Bridge (BD82x6x).
[1] http://review.coreboot.org/3522
Change-Id: I7c6048fd0f56288769ad90acbfb67b908ac8d824
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6047
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
On newer Intel systems, like Intel Lynx Point, the flash ROM is shared
between the host processor (BIOS), its Management Engine (ME) and an
integrated Ethernet controller (GbE). The layout of the flash ROM (and
other information) is kept in the so called Intel Firmware Descriptor
(IFD). If we only want to build coreboot to update the BIOS section,
all we need is the flash layout.
So add the option to specify the flash layout in the mainboard’s
Kconfig, and thus, to build without the real IFD. However, with such a
build, one has to make sure that the IFD section on the flash ROM will
not be written over (nor any other section that has not been included
by coreboot). A patch to write selected sections of a flash ROM with
IFD has been sent to the flashrom mailing list [2].
The same was done in commit a15cd66b [1] (sandybridge: Make build
possible without descriptor.bin) for Intel Sandy Bridge (BD82x6x).
[1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
[PATCH] Add option to read ROM layout from IFD
[2] http://review.coreboot.org/3524
Change-Id: I26a604446cdf37a6bbcee2b14a107b7ccf417d5c
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6046
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
To be precise, wakeup from S3 does not involve SPI writing, while
preparing for it on cold power-ons currently does.
For S3DataTypeMtrr storage is changed such that the first 4 bytes
is the length of data stored like with the other two S3DataType.
Change-Id: Id920650474530d4191075da4ef70daa66c904c5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6085
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Port the changes that were made in amd/cimx to amd/agesa
as were done in:
commit c93a75a5ab
Author: Mike Loptien <mike.loptien@se-eng.com>
Date: Fri Jun 6 15:16:29 2014 -0600
AMD/CIMx: Add functions for AMD PCI IRQ routing
This change also moves the PCI INT functions to
southbridge/amd so that they can be used by CIMX and
AGESA. The amd/persimmon board is updated for this
change.
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Change-Id: I525be90f9cf8e825e162d53a7ecd1e69c6e27637
Reviewed-on: http://review.coreboot.org/6065
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Move some __SMM__ functions under the #if preprocessor condition to
avoid warnings about unused functions.
Change-Id: I7f6fbc6a577032bc4e4635d91e8e94aecb517bd3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6127
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
These parameters are not specific to the southbridge device, but
the implementation of S3 storage defined by CPU code.
Change-Id: Ic341cc2b7669cf8e3e920c48473826ec03fc7d8d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6081
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM.
Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Try to 'standardize' the otherwise peculiar method naming to be somewhat
more in-line with other ACPI implementations. This makes it easier to
compare with vendor DSDT dumps for example.
Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5888
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The IMC functions were being called and timing out when the
CONFIG_SB800_IMC_FWM/CONFIG_HUDSON_IMC_FWM were defined as 0.
Changing to a IS_ENABLED will keep the IMC handshake from
occuring if the IMC firmware isn't running.
Tested on a Persimmon platform which makes three calls to
spi_claim_bus() with each call timing out after 500ms.
Change-Id: I5d4bbcecf003b93704553b495a16bcd15f66763b
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5974
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The CIMX sb700/sb800/sb900 and agesa/hudson code was treating
the LPC SPI BAR as a normal PCI BAR. This will set the
resources for a fixed size at a fixed address. This was tested
on hp/abm, amd/persimmon, and gizmosphere/gizmo boards.
Change-Id: I1367efe0bbb53b7727258585963f61f4bd02ea1d
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5947
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The PCI_INTR table is an Index/Data pair of I/O ports
0xC00 and 0xC01. This table is responsible for physically
routing IRQs to the PIC and IOAPIC. The settings given
in this table are chipset and mainboard dependent, so the
table values will reside in the mainboard.c file. This
allows for a system to uniquely set its IRQ routing.
The function to write the PCI_INTR table resides in
cimx_util.c because the indices into the table have
the same definitions for all SBx00 FCH chipsets.
The next piece is a function that will read the PCI_INTR
table and program the INT_LINE and INT_PIN registers in
PCI config space appropriately. This function will read
a devices' INT_PIN register, which is always hardcoded to
a value if it uses hardware interrupts. It then uses this
value, along with the device and function numbers to
determine an index into the PCI_INTR table. It will read
the table and program the corresponding value into the PCI
config space register 0x3C, INT_LINE. Finally, it will set
this IRQ number to LEVEL_TRIGGERED on the PIC because it is
a PCI device interrupt and the must be level triggered.
For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN
value hardcoded to 2. This corresponds to PIN B. On the
Persimmon mainboard, I want the USB device to use IRQ 11. I
will program the PCI_INTR table at index 0x31 (this USB device
index) to 11. This function will then read the INT_PIN register,
read the PCI_INTR table, and then program the INT_LINE register
with the value it read. It will then set the IRQ on the PIC to
LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4.
Also, the SB700 has slightly different register definitions than
the newer SB800 and SB900 so it needs its own set of #defines for
the pci_intr registers.
Only the Persimmon mainboard is adapted to this change as an
example for other mainboards.
Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/5877
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Without this change the IOAPIC memory window would collide
with PCI config space. This was tested on the hp/abm board.
Change-Id: I5dd53463961f75bab80a41dc7beff8d0434b24ae
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5946
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Spotted by Clang.
Change-Id: Ie4bed914ab694f4e96155140b8b54b6eb96d70d7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5819
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Dave Frodin