This check verifies that all mainboard vendors
and boards have a Kconfig.name entry.
Change-Id: I3ed3bfa0d3f78e55a8d54918f5f3f29f51068e48
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9707
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that we have timestamps in pre-RAM stages, let's actually make use
of them. This patch adds several timestamps to both the bootblock and
especially the verstage to allow more fine-grained boot time tracking.
Some of the introduced timestamps can appear more than once per boot.
This doesn't seem to be a problem for both coreboot and the cbmem
utility, and the context makes it clear which operation was timestamped
at what point.
Also simplifies cbmem's timestamp printing routine a bit, fixing a
display bug when a timestamp had a section of exactly ",000," in it
(e.g. 1,000,185).
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Falco, confirmed that all timestamps show
up and contained sane values. Booted Storm (no timestamps here since it
doesn't support pre-RAM timestamps yet).
Change-Id: I7f4d6aba3ebe3db0d003c7bcb2954431b74961b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a2ce81722aba85beefcc6c81f9908422b8da8fa
Original-Change-Id: I5979bfa9445a9e0aba98ffdf8006c21096743456
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234063
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9608
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Non-x86 boards currently need to hardcode the position of their CBFS
master header in a Kconfig. This is very brittle because it is usually
put in between the bootblock and the first CBFS entry, without any
checks to guarantee that it won't overlap either of those. It is not fun
to debug random failures that move and disappear with tiny alignment
changes because someone decided to write "ORBC1112" over some part of
your data section (in a way that is not visible in the symbolized .elf
binaries, only in the final image). This patch seeks to prevent those
issues and reduce the need for manual configuration by making the image
layout a completely automated part of cbfstool.
Since automated placement of the CBFS header means we can no longer
hardcode its position into coreboot, this patch takes the existing x86
solution of placing a pointer to the header at the very end of the
CBFS-managed section of the ROM and generalizes it to all architectures.
This is now even possible with the read-only/read-write split in
ChromeOS, since coreboot knows how large that section is from the
CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be
changed on systems that place other data next to coreboot/CBFS in ROM).
Also adds a feature to cbfstool that makes the -B (bootblock file name)
argument on image creation optional, since we have recently found valid
use cases for CBFS images that are not the first boot medium of the
device (instead opened by an earlier bootloader that can already
interpret CBFS) and therefore don't really need a bootblock.
BRANCH=None
BUG=None
TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco.
Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c
Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229975
Reviewed-on: http://review.coreboot.org/9620
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With the Storm image layout reworked, the very first blob read out of
NOR SPI flash by the IPQ8064 maskrom is supposed to be a concatenation
of three binaries: one to run on RPM, another one to run on AP, and
the third one - the actual coreboot bootblock.
This layout allows to greatly reduce the size and complexity of the
two first blobs, as they do not need to include the SPI driver.
The first binary in the input file list starts with the combined
header, describing the rest of the blob. This utility copies the first
input file into output, updating the combined header with the total
size of the concatenated binaries.
The second and third binaries in the combined image are required to be
aligned at 256 byte offsets in the file as counted from the end of
the combined header. The new utility allows to concatenate two or
three files, always expecting the first file to be prepended by the
combined header.
For further reference below is the utility's help message:
mbncat.py: [-v] [-h] [-o Output MBN] sbl1 sbl2 [bootblock]
Concatenates up to three mbn files: two SBLs and a coreboot bootblock
-h This message
-v verbose
-o Output file name, (default: sbl-ro.mbn)
BRANCH=none
BUG=chrome-os-partner:34161
TEST=run the new utility and compare the result with the output of
the vendor provided tool. The output files are exactly the same.
Change-Id: I1d3b3634ecc3f46ea88adb9b6c4fbfc017cc06ac
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 94008340bc5eaf19d286b3feaa4091e5c5e285aa
Original-Change-Id: I00724f7c75703fc90d7971c3cb337c33ca96f2b5
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232047
Original-Reviewed-by: Manoj Juneja <mjuneja@qti.qualcomm.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9572
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When only one argument is passed on the command line, consider this
argument the name of the BIMG formatted file, and verify its
integrity.
Update the help/usage text to match new behavior.
BRANCH=none
BUG=none
TEST=when the corrupted coreboot BIMG image is passed as the only
argument, this utility reports the problem. With the build fixed,
the check passes without errors (the second invocation below).
$ build/util/bimgtool/bimgtool /build/urara/firmware/coreboot.rom.serial
Data header CRC mismatch at 0
$ build/util/bimgtool/bimgtool /build/urara/firmware/coreboot.rom.serial
$
Change-Id: I9f0672caa38e3d27917471fc5137ede4ca466e9a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e631c311dbf2fb04714e437f95c41629155527f
Original-Change-Id: Ie56f87f99838891d8e341d7989c614efbcabe0cd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227522
Original-Reviewed-by: Zdenko Pulitika <zdenko.pulitika@imgtec.com>
Original-Tested-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/9452
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Switched to CRC 16 as it's 40% faster than CRC x25.
Both CRC 16 and CRC x25 are supported and either can be selected through
define directives.
BUG=chrome-os-partner:31438
TEST=built urara bootblock and verified content of bootblock.bin, observed
expected content; ran it on Pistachio FPGA and observed that its
content is read properly by bootrom.
BRANCH=none
Change-Id: I36dec6ec2d6616343f97cc8b6486c0a3e4ea49ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d9318097ca9270bc245e7de4aff5f78dfbc1606
Original-Change-Id: If1a78350e0b48d91bfe64ead45f852f44ba3cf9a
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226840
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9415
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This is a script we have been using to rewrite commit messages when
upstreaming coreboot patches from the Chromium OS tree into coreboot
upstream.
Change-Id: I5442279c099dafe55cc97ccf09ee2bc2df4eca5f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9299
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We have another stage which we need to test for. Not a problem
right now, because it always matches either bootblock or romstage,
but future proof the test.
Change-Id: Id0a16d9bc1270516f2c00f9f8fd049420c9ba354
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9380
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This moves the ram dump behind an argument, but
it's still called by default when no other arguments given.
To hold backward compatibility -i also prints out RAM.
Change-Id: I82648e8cf1eac455e9937bd3669a0e91a3ee87cf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8381
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Peter Stuge <peter@stuge.se>
Kconfig's include directive "source" does not support
wildcards (e.g. source src/mainboard/*/Kconfig) which
makes automatic inclusion of all boards a tedious task
and prevents us from implementing "drop in" boards.
In our Makefile.inc files we already include mainboard
directories per wildcard, so let's add the infrastructure
to do the same with Kconfig.
Change-Id: I1988ff6ce3e167e86bb5cb65fc04a13748599dad
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9294
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
make failed while executing "OPTION option_table.h" by printing
nvramtool's usage message when crosscompiling coreboot on the BBB.
The reason is the usage of char for the return value of getopt instead
of int and comparing it to -1 later... although char might be unsigned
as it is usually on ARM.
Change-Id: Ib20fd5ef174d484bbb35f80150b8f898d95d0fe4
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/9307
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's no such thing as "list_struct".
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Change-Id: Ida39beb7b81801b277b623ff5a40291d643706ee
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9314
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The calloc() and xcalloc() functions takes @nmemb first and then @size. Fix all w/
pattern "calloc\s*(\s*sizeof".
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change-Id: I8b51cc59b3f3631b93b7e215fec5bf140cc2cbf9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9313
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Warning:
In file included from scripts/kconfig/zconf.tab.c:2537:0:
scripts/kconfig/menu.c: In function ‘get_symbol_str’:
scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized]
jump->offset = strlen(r->s);
Simplifies the test logic because (head && local) means (jump != 0)
and makes GCC happy when checking if the jump pointer was initialized.
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Change-Id: I43de391c9573a28c66d17e7dc535033be39060de
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9312
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Change-Id: I033338a4a3f3a20944feace46b679c85ee32d14e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9310
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Although on some systems va_end is a no-op, it is good practice
to use va_end, especially since the manual states:
"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Change-Id: Ia08a57c37a6294e002cb6ce4c0a010c0d2edf973
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9309
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Imported from upstream linux kernel kconfig.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ieed948c6b9c5fc40c1f3d652df11fa70ec6e93a0
Original-Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Original-Signed-off-by: Michal Marek <mmarek@suse.cz>
Reviewed-on: http://review.coreboot.org/9308
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).
This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Change-Id: Ie2372ca35546c1fc2d6cf603614683312ee4ea4c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9315
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds a few new file types to cbfstool. Currently these
files are being added using bare hex values in the coreboot
makefiles. This patch is just to make the values official and
to help get rid of some confusion in the values used within the
makefiles.
All of these new types are roughly equivalent to raw.
Change-Id: I37c4180a247136cd98080f6f7609d3cf905a62f5
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8977
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Copy $0 contains the path, and we cd into that early.
Change-Id: If4124d16dea97b5eee4996bdfa3eae3d5d94c5d1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9145
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Confirmed to work on FreeBSD using sh from base and bash from ports.
Verified to not break M.O. on Linux.
Change-Id: I3bce724c889c7fb760b30b25e9fc0b74620e2c53
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/9056
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The build system expects mipsel, and it's the more
precise name, too.
Change-Id: I9e1135385b3f1374b3179ecf5e11a1d60bc17ef7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9144
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Danube has become Pistachio, let's rename all instances where this SOC
is mentioned.
BUG=none
TEST=board urara still builds
Change-Id: Iea91419121eb6ab5665c2f9f95e82f461905268e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58696cc7c77a70dca2bfd512d695d143e1097a78
Original-Change-Id: Ie5ede401c4f69ed5d832a9eabac008eeac6db62d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220401
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: http://review.coreboot.org/9048
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This script produces a "minimal" configuration from a full coreboot
configuration, e.g. a configuration file that only contains the differences
between the default configuration of a board and the input configuration
file.
Usage: util/kconfig/miniconfig config.big config.mini
This will read config.big and produce config.mini. If you omit config.mini,
config.big will be changed in place.
Minimal configurations are easier to read and more robust when reusing
them among different versions of coreboot as they reflect exactly the
changes made to the default configuration instead of a full snapshot
of all configuration options.
Change-Id: Ifbee49e0192c2c557b18bcc1a92fe2a5d5164a3a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8974
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Instead of repeating the ok/failed test all the time,
move it into a function.
Change-Id: I7496dfb5d3d2385316c577e1cf0901950b0e7083
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8987
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The first problem for crossgcc users that encounter build errors is
figuring out what is wrong with the build. Point out where the logs
reside.
Change-Id: I0300ecf6356c1a4ce18ae1e37fe0a56f46210d13
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8982
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ie002c69ab23cfc961b77771c4f2c20e5ae6bea60
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8633
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Fix up tree detection to work in a coreboot tree
* Switch C99_COMMENT from ERR to CHK
Change-Id: Ie8d6d1407853b77a4b3e9763f23481bd9402bc61
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8418
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MIPS targets should be compiled with no position independent code
allowed, as the generated image often does not support short range
components reference.
BUG=chrome-os-partner:31438
TEST=with the rest of the patches included MIPS board urara builds
successfully
Change-Id: I8ac2a2f6979d3b468159c9e29d07e022f48ab18a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e932b203db3e7cb510a7bf862d4538d55b6c7271
Original-Change-Id: I637dd44eb565447c18b2c3cdb022d0933c52fd20
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215677
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8822
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The upcoming MIPS toolchain inside chroot generates elf images of
elf32-tradlittlemips format, whereas readily available tools outside
of chroot generate images of elf32-littlemips format. Both of these
formats are perfectly fine, but xcompile accepts only one format per
CPU architecture.
This patch allows to specify multiple formats per architecture, any
matching format will suffice.
BUG=chrome-os-partner:31438
TEST=emerged arm, x86 and mips targets inside chroot
Change-Id: I2c6b8e46b9299059b8e099b93c8c3dcf0a569899
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7f2f1d51643f33b72ac5e4091669f38662e5b9ce
Original-Change-Id: I22405e71ac72b985fad51e2f5d7cc014107b8a9e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214599
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8823
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a new utility named bimgtool, a simple tool which generates boot
images in the BIMG format. This is the format the Danube boot ROM
expects the user supplied code to be wrapped in, it is described by
struct bimg_header in the code.
This utility will be used to wrap the coreboot bootblock when building
Danube targets.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: I08ddb1b70d0b1feb1ffb3d62c4e5e6f07f4acdb7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7fe6a9f383b79120f9ae231453d4b3a0f85b4fa7
Original-Change-Id: I63b9f5e09cd1f12765317b38e2a0dd033cdd6d39
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8768
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The default mapping size is 1MiB of ram. However, not
all systems allow 1MiB of memory to mapped depending on
the kernel's memory map. Therefore, be explicit about
the sizes to mmap().
The only path that wasn't cleaned up was the coverage path
as that needs to handle dynamic cbmem. The correct way to
fix that is to add a global like the timestamps that is set
while parsing cbtable.
BUG=chrome-os-partner:31355
BRANCH=None
TEST=Can cbmem -ltc on ryu.
Change-Id: I548afa5ddbe0a859f52bc2ab2d0931186ee378a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: df4991ce1da7f0c25e99d84222cbc8d3189d0d66
Original-Change-Id: I27b70ae8a8fba168d1c1829bbef0135c7b651eac
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221971
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=None
BUG=None
TEST=Manual
Change-Id: I8b31a0b194d353ea3e7863513f2e36f3e032fad8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7ccba49a7c2372cdfff6e2947e417d4d4f5436c2
Original-Change-Id: I9beebdf29e4fc4aa645581146fdc61c659de72df
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229973
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/8808
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built secmon which had this type of relocation.
Change-Id: Ie367c348fbf59465e238e5fa60f217f5373501b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a754bc1fe39c19ab8b2f7be9648cccb06156b0ef
Original-Change-Id: If170d9e270daf3153e92d16c06516915c727e930
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218843
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8807
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
uio_usbdebug enables you to debug coreboot's usbdebug driver inside a
running operating system (only Linux at this time). This comes very
handy if you're hacking the usbdebug driver and don't have any other
debug output from coreboot itself.
Currently, only Intel chipsets are supported.
Change-Id: Iaf0bcd4b4c01ae0b099d1206d553344054a62f31
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/4695
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We use paths relative to that in the buildgcc script.
Change-Id: I2b79c3d2c75088af7e8e362d18a38274352eb965
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8713
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
You can build your new toolchain with:
$ cd util/crossgcc/
$ ./buildgcc -d /opt/cross -p x86_64-elf -j 16
or
$ make crossgcc-x64
Change-Id: I8eb584166294578d2b33c63e94ed3aca9b5de4f4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8668
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Ia90f967a4988214c719f374a49233bb6fade11b0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8481
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If not derived it's possible it defines
inconsistent timestamps which differ from each other.
Change-Id: I090fdce4c4c1c24135ec72818eecb69e168df565
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8617
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
They don't contain any useful information and
also block us from having reproducible builds.
Change-Id: Ib03887f6a548230de9f75fb308c73a800e180c48
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8616
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Moving the routines that create build.h into a script offers
several advantages. We can create more complex functions to
run and we don't have to deal with both bash and Make at the same
time.
This script combines what is currently in Makefile.inc with a
couple of updates.
- Update how it determines whether to use git for the timestamp
- Move the git revision string generation inside the routine
that checks to see if we have git.
- Add a timeout for the domain name check.
Change-Id: I93c131e8d01a0099eb13db720fa865c627985750
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8428
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Our Mediawiki instance doesn't accept the old txt format anymore.
Change-Id: I94b9f5366900ec8e192abab3ed716dbced4fc4f7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfstool has diverged between coreboot upstream and the chromium tree.
Bring in some of the chromium changes, in particular the useful remainders
of cbf37fe (https://chromium-review.googlesource.com/176710)
- fix coding style
- mark unused variables explicitly unused
- remove some dead code
Change-Id: I354aaede8ce425ebe99d4c60c232feea62bf8a11
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/8577
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Specify a CBFS architecture value for MIPS and allow cbfstool to make
use of it.
Original-Change-Id: I604d61004596b65c9903d444e030241f712202bd
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207971
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 7c4df61715df3767673841789d02fe5d1bd1d4a0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib30524f5e7e8c7891cb69fc8ed8f6a7e44ac3325
Reviewed-on: http://review.coreboot.org/8519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GCC's build system is sometimes confused by our build system's
configuration: make crossgcc failed, while
util/crossgcc/buildgcc -p armv7-a-eabi didn't.
Make sure the GCC build system runs independently from
ours by breaking any ties.
Change-Id: I563e17b22127bc8c83ebfb17252184a3b6e0e58b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8545
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch introduces support for building a MIPS cross compiler
targetting little endian machines by default.
Original-Change-Id: I116f6f431cdf80f5f5f58d2743357a9f70a7347d
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207970
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d6c9603c41b3d11400cee7b5b409203af0632aa2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I543cd2276d2f63ed2036a1c1259c9a07cb8a4ba8
Reviewed-on: http://review.coreboot.org/8518
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The following changes are included.
Changes in version 1.0.3:
- Fixed mpc_pow, see
http://lists.gforge.inria.fr/pipermail/mpc-discuss/2014-October/001315.html
- #18257: Switched to libtool 2.4.5.
Changes in version 1.0.2:
- Fixed mpc_atan, mpc_atanh for (+-0, +-1), see
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57994#c7
- Fixed mpc_log10 for purely imaginary argument, see
http://lists.gforge.inria.fr/pipermail/mpc-discuss/2012-September/001208.html
Upgrading also fixes the issue, where for example running `make crossgcc-arm`
ails as MPC cannot be built.
Building MPC 1.0.1 ... failed
As it worked for others, it turns out that I had a release archive for
MPC 1.0.1 cached from October 2014, which was generated incorrectly, so
that `./configure` and `Makefile` are missing.
$ LANG=C ls -l util/crossgcc/tarballs/mpc-1.0.1.tar.gz
-rw-r--r-- 1 joey joey 224232 Oct 19 2013 util/crossgcc/tarballs/mpc-1.0.1.tar.gz
$ md5sum util/crossgcc/tarballs/mpc-1.0.1.tar.gz
22a27bee89616dca4d654fc579a816e5 util/crossgcc/tarballs/mpc-1.0.1.tar.gz
$ md5sum mpc-1.0.1.tar.gz # downloaded today
b32a2e1a3daa392372fbd586d1ed3679 mpc-1.0.1.tar.gz
So upgrade to MPC 1.0.3 as the release archive as of today contains the
needed files.
$ md5sum util/crossgcc/tarballs/mpc-1.0.3.tar.gz
d6a1d5f8ddea3abd2cc3e98f58352d26 util/crossgcc/tarballs/mpc-1.0.3.tar.gz
Change-Id: Ibfd02a9b362b12361b210d512420b87caebb0fdf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
TEST:Run `make crossgcc-arm` and observe `Building MPC 1.0.3 ... ok`.
Reviewed-on: http://review.coreboot.org/8521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix up commit 1b6e7a67 (Updates to the board status script) adding this
comment before running `cbfstool` by moving it to a more appropriate place.
Change-Id: Iff79ed44e8e5ced55f2345407d1668858098ebe4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8491
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This tells abuild that it can in fact build arm64
images.
Change-Id: I47695372053513ca039e118776aa904ea0afa21d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8474
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Add the flags used by the Nvidia makefile and use HOSTCC
to build cbootimage. Note that adding -g makes the BCT
very large, so leave that flag out.
Change-Id: I4431efffdfdcbd030665b26f5b799352e38d1f95
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If one needs raw binary files, .bin extension cannot
be used due to settings in .gitignore. This patch
allows to use .hex files. To avoid lint checks on these
files, exclude the .hex extension from the test.
Change-Id: I4b503229d63694c48cce12ca8cd33ea58172af01
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8403
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
From git's point of view submodules are a weird third thing between file
and directory. Avoid trying to apply file handling on a directory.
Change-Id: Ibbc9c28e1657d96413c5fb08705d30e25171254d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8372
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Carefully staging to enable checkpatch for coreboot contributions.
The biggest offender of the rules enforced by checkpatch I have found so
far is ... Oh, you guessed it? It's checkpatch itself.
Change-Id: Iaacbcd52c3bc22b083a24127a3ea17a7cc706245
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8417
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It doesn't provide any useful information.
Change-Id: I13e68d443bbcadea45b8fbcc262ceb9deb3e2e61
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8380
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Peter Stuge <peter@stuge.se>
coreboot toolchain.inc uses the ARCH_SUPPORTED variable set
by xcompile. This change allows for consistent naming in the
toolchain.inc generated variables.
Change-Id: Iafed06cf2d19a533f99e10b76aca82adc3e09fa8
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8235
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
This patch brings the cbmem utility in line with the recent change to
coreboot's device tree binding. Since trying to find the right node to
place this binding has been so hard (and still isn't quite agreed upon),
and because it's really the more correct thing to do, this code searches
through the device tree for the 'coreboot' compatible property instead
of looking up a hardcoded path. It also provides bullet-proof
'#address-cells' handling that should work for any endianness and size.
BUG=chrome-os-partner:29311
TEST=Ran cbmem -c and cbmem -t on Nyan_Big. Also straced the to make
sure everything looks as expected. 'time cbmem -t' = ~35ms shows that
there is no serious performance problem from the more thorough lookup
code.
Original-Change-Id: I806a21270ba6cec6e81232075749016eaf18508b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204274
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit 3e64e28f684e60e8b300906c1abffee75ec6a5c2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0a0a4f69330d3d8c5c3ea92b55f5dde4d43fca65
Reviewed-on: http://review.coreboot.org/8141
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the arch check for each stage as the arch for different stages can be
different based on the SoC. e.g.: Rush has arm32-based romstage whereas
arm64-based ramstage
BUG=None
BRANCH=None
TEST=Compiles successfully for nyan, link and rush
Original-Change-Id: I561dab5a5d87c6b93b8d667857d5e181ff72e35d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205761
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 6a6a87b65fcab5a7e8163258c7e8d704fa8d97c3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic412d60d8a72dac4f9807cae5d8c89499a157f96
Reviewed-on: http://review.coreboot.org/8179
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For arm64, the machine type is arm64 in cbfstool, however it was displayed as
aarch64 in help message. This patch corrects it.
BUG=None
BRANCH=None
TEST=None
Original-Change-Id: I0319907d6c9d136707ed35d6e9686ba67da7dfb2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204379
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 1f5f4c853efac5d842147ca0373cf9b5dd9f0ad0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I00f51f1d4a9e336367f0619910fd8eb965b69bab
Reviewed-on: http://review.coreboot.org/8144
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change-Id: I3bb5dc23885af8c992456ee5e4bd374cd4b813bf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8049
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In https://chromium-review.googlesource.com/181272 the payload->type has been
changed to big-endian (network ordering) but the cbfs_image is still parsing
type as host ordering, which caused printing cbfs image verbosely
(cbfstool imge print -v) to fail to find entry field and print numerous
garbage output.
Payload fields should be always parsed in big-endian (network ordering).
BUG=none
TEST=make; cbfstool image.bin print -v -v -v # see payloads correctly
Original-Change-Id: If1ac355b8847fb54988069f694bd2f317ce49a1a
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/200158
Original-Reviewed-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 423f7dd28f8b071692d57401e144232d5ee2e479)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5a4694e887c7ff48d8d0713bb5808c29256141a9
Reviewed-on: http://review.coreboot.org/8005
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
CBMEM IDs are converted to symbolic names by both target and host
code. Keep the conversion table in one place to avoid getting out of
sync.
BUG=none
TEST=manual
. the new firmware still displays proper CBMEM table entry descriptions:
coreboot table: 276 bytes.
CBMEM ROOT 0. 5ffff000 00001000
COREBOOT 1. 5fffd000 00002000
. running make in util/cbmem still succeeds
Original-Change-Id: I0bd9d288f9e6432b531cea2ae011a6935a228c7a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199791
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5217446a536bb1ba874e162c6e2e16643caa592a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d839316e9697bd3afa0b60490a840d39902dfb3
Reviewed-on: http://review.coreboot.org/7938
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
make called within make prints 'Entering directory'
cruft which confuses the architecture support test.
Silence it.
Change-Id: I7ce7e0ff49e9317fe736ed80f5f18186d416ae63
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7968
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
They create output in an obsolete form, are not actively maintained,
and the quality of the output is not better than randomly copy
pasting from other boards. These tools are no longer of any practical
value. remove them.
Change-Id: I49d7c5c86b908e08a3d79a06f5cb5b28cea1c806
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5158
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
nct6776f and nct6776d are just two package variants containing the same die
Change-Id: I4d319fa0e791e66ad04857dede2fdfc8e42dd45a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/7806
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
change default values according to the datasheet in revision 1.2
Change-Id: Iec1d55dd7b906a7a41940f3f8e42413922883efd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/7805
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Windows requires O_BINARY when opening a binary file. Otherwise
\n characters get expanded to \r\n and <ctrl>z is treated as
end of file. For compatibility with non-Windows hosts, the patch
defines O_BINARY if it is not already defined.
Change-Id: I04cd609b644b1edbe9104153b43b9996811ffd38
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/7789
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Windows requires the 'b' (binary) flag when using fopen to open a
binary file. Otherwise \n characters get expanded to \r\n and <ctrl>z
is treated as end of file.
Change-Id: I3b85e4f9a8f7749801a39154881fe2eedd33f9b8
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/7790
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Scott Duplichan provided a win32 related fix that
we want to use.
Change-Id: I791b470f9f6c5bf140fc190d290741f35f05d254
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7827
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
A leading double slash can result when $DESTDIR/$TARGETDIR is expanded
in the libelf portion of buildgcc. The leading double slash causes buildgcc to fail when run from Windows/Msys2. Replace $DESTDIR/$TARGETDIR
with $DESTDIR$TARGETDIR to avoid the problem.
Change-Id: Ide2bae41c07c1566f80104c3a2e2acab53de0d17
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/7788
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
It's not useful in quiet mode, and is very distracting.
Change-Id: I59dc8caa22b66980560d5afb76eae801efaa29ad
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/124
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
We already have aarch64 targets. Extend the "all" target.
Change-Id: I74d9bf5123695318c15b73c89f170f3ebb20aa80
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7729
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
- add a 'quiet' mode that only prints important messages
- add vendor/mainboard to all strings printed
With quiet on, multithreaded looks like this:
skipping google/storm because we're missing compilers for (arm armv4 armv7)
iwill/dk8_htx built successfully. (took 5s)
jetway/j7f2 built successfully. (took 6s)
iwill/dk8x built successfully. (took 8s)
iwill/dk8s2 built successfully. (took 8s)
jetway/j7f4k1g5d built successfully. (took 10s)
With quiet off, single threaded now looks like this:
Building intel/emeraldlake2
Creating config file for intel/emeraldlake2...
intel/emeraldlake2 (blobs, ccache)
intel/emeraldlake2 config created.
Compiling intel/emeraldlake2 image...
intel/emeraldlake2 built successfully. (took 5s)
And quiet off multithreaded looks like this:
Building iwill/dk8_htx
Creating config file for iwill/dk8_htx...
iwill/dk8_htx (blobs, ccache)
intel/mohonpeak config created.
Compiling intel/mohonpeak image on 1 cpu...
intel/minnowmax config created.
--- snip ---
intel/mtarvon built successfully. (took 4s)
Building iwill/dk8s2
Creating config file for iwill/dk8s2...
iwill/dk8s2 (blobs, ccache)
intel/mohonpeak built successfully. (took 5s)
Building iwill/dk8x
Change-Id: Ib7b9a625d77bb8e0663afc00d7133e415866ecec
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7716
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
abuild, inteltool, and superiotool's manpages still referenced reporting
bugs to tracker.coreboot.org. Remove that url and change the message
to point to the coreboot mailing list instead.
Change-Id: I7a85bc2b36ccdb7f3798a39a08345c1a02a67e65
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7712
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
While it may not be the best way theoretically as theoretically only one
of clones may fail if clones are not perfect, in practice there is more
variance between e.g. different X60 variants than between most of the clones,
yet we put all X60 variants together.
Also in most cases we don't even have a way to tell the clones apart.
Change-Id: I786aeed55300026fae0d9f0497d0c830a9f5e452
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7564
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Commit b4b9eb39 (x86: provide infrastructure to backup default SMM
region) introduced the new CBMEM type `CBMEM_ID_SMM_SAVE_SPACE`, but
did not add its name `SMM BACKUP` to the utility `cbmem`, causing the
following output, when running `cbmem` on a system making
use of `BACKUP_DEFAULT_SMM_REGION`.
7. 07e9acee 7f7e5000 00010000
Fix that by adding the name `SMM BACKUP` to the struct
`cbmem_id_to_name`.
Change-Id: Ib24088c07af4daf6b7d8d5854283b5faa2ad6503
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7176
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The call site expects them to be.
Change-Id: Ic05fc5831f5743d94fe617dfb3b9e329f01866d1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7621
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Fixes crash occurring when 'nvramtool -a' tried to free a prematurely
freed pointer. (Tested on x60)
malloc() is correct because the pointer is accessed outside the calling
function. The pointer is freed in the parent function list_cmos_entry().
Change-Id: I1723f09740657f0f0d9e6954bd6d11c0a3820a42
Signed-off-by: Andrew Engelbrecht <sudoman@ninthfloor.org>
Reviewed-on: http://review.coreboot.org/7620
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The libelf build system doesn't support the
DESTDIR variable. Work around by mangling prefix
when installing.
Change-Id: I3a56eb2bf919bcb9b586b945dce26a02dbaff931
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7613
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There isn't a history of broken clang compilers yet
so let's give it a chance.
Change-Id: Iddb63700e3850116313c1ddee69111f936191055
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7607
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This allows easy creation of redistribuable binary.
Change-Id: I12a82d509cd4bd46baeb4f4066e509c69301ab95
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7565
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
.bin is the most convenient format for storing SPDs and since it's
not text format, whitespace check is useless and gives false positives.
Change-Id: I8a7569eac8a1dfbffabe166a38e4dd3e895fdef1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7567
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Fixes regression caused by commit 405304ac
(cbfstool: Add option to ignore section in add-stage)
Change-Id: If9e3eea9ab2c05027f660d0057a635abf981b901
Signed-off-by: Francis Rowe <info@gluglug.org.uk>
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7545
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds the crosstools-aarch64 and crossgcc-aarch64
make rules to create a toolchain (with or without gdb)
for AArch64 targets.
Also adapt xcompile, since it's aarch64-elf.
Change-Id: I6fbe09d44ee8b8493d3cd8dbbba869b409e311f7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7527
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
gcc 4.9.2 fails on our tree right now. We should clean that
up and test before we make it the reference version.
Also, the AMD K8/Fam10 issue we had last year, for which
Vladimir provided an "untested" fix (which is in,
commit a6c29fe684), isn't
reproducible: I boot-tested an unpublished AMD K8 board
with coreboot built with gcc 4.8.3.
(Disclaimer: since the old issue depended on compiler
decisions on register allocation, any change to code
or compiler could mix up things in semi-random ways.)
Change-Id: I8f1460a8da2c9e2d581482b22a4824b10b8987fa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7526
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Otherwise rename() fails when used across filesystem
boundaries.
Change-Id: I22a62310f0e46ac9cfee50b7e9eeed93536ed409
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7504
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
It contains a number of fixes to bugs found
by Coverity Scan.
Change-Id: I362a069afd37783f59d8831e44ae885e8490819e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7392
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is required to run abuild parallely with clang
without the canonical coreboot toolchain installed.
Change-Id: Iea56d3f552d50ab6e762afa134091b0d8e38792c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7369
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add IDs of some SNB and Haswell chips; use more descriptive names.
Add PCIEXBAR and PXPEPBAR read support for SNB/IVB/Haswell.
Change-Id: I16753bf90061fc2065b813b1c2169e7b7bcc89e8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/7360
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Mathias Krause <minipli@googlemail.com>
If we find multiple LPC controllers, we want to tell the user that we'll
ignore all but the first. However, we use 'dev' in the message (the
current device found) instead of 'sb' (the one we want to use).
Fix the message by using 'sb' and break the loop right away in this
case. It's sufficient to tell the user once which LPC controller we'll
use.
Change-Id: Ibd27e40525fabe8c63b112691ad49fd994c70a48
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/7342
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Change-Id: I408614e743ab6f0f447b327c01d8f4dacf787124
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6692
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
It never worked.
Change-Id: Ic68614bb8ed481babf54b4f9d8db00635755f4d1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7324
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Actually abort if a cross compiler is missing, but also handle
subarchitectures (currently: armv4 and armv7 for arm)
properly.
Change-Id: Idf37fb029178df6f2ac029466c66aaa2010bdbd2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7297
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Allow add-stage to have an optional parameter for ignoring any section. This is
required to ensure proper operation of elf_to_stage in case of loadable segments
with zero filesize.
Change-Id: I49ad62c2a4260ab9cec173c80c0f16923fc66c79
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/7304
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Change cbfs-mkstage to use parsed elf instead of calling elf_headers. That
allows us to have access to the complete elf including the string table.
Change-Id: Ie767d28bdf41af38d1df0bce54bc0ada45123136
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/7303
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Nicolas Reinecke was noticing that in my Lenovo T410s logs the GPIO*3
settings were missing. This led to some investigation and this patch, thanks!
Change-Id: I7ba28aa00d10f988a7fe81e61d2e216b54a11006
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/7239
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is a copy of the tool provided by the vendor. It adds a
header which tells the early stage loader where to load the next phase
blob for execution. It is going to be used to encapsulate the
bootblock.
Usage of this tool is as follows:
ipqheader.py <base-addr> <input-file> <output-file>
Old-Change-Id: I448c006719f4f3dd5a6716ff2e47f7fc275c805e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193494
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 201630f8637eb627f0894ecd7bceb31017244ad4)
Make ipqheader.py executable
Modify the utility to become a Linux executable. While at it, fix the
program name reported by error messages.
Old-Change-Id: I25061d43fdea72655a696deb9e494e9c7382f670
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193495
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit bbbf69c754aa3b6a1bf17ab3ced1c739c3ee0688)
ipq8064: SBL headers must have 4 byte aligned blob sizes
It turns out that for SBL3 to load the next phase, the sizes in the
MBN header must be 4 byres aligned. This change makes sure that this
requirement is enforced.
Old-Change-Id: Ia64f04bb281ae772b060d2f7713c98dd348972ba
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196167
(cherry picked from commit fa6a52a07cb87ecf2538a6b0d47605d79104e4cc)
Add proper license to the ipqheader tool
This patch adds a vanilla BSD 3-Clause license.
Original-Change-Id: I9da7176e670b598808ef5be2461b6105a4c5f6c5
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225783
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Tested-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a0c47a8d74f1ac131c91e978b6d68bbcfaa52c37)
Squashed 4 commits for the ipqheader util.
Change-Id: I144c01947a89e1348a06aa82590e972e2ec31247
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6976
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Add support for creating ARM rmodules. There are 3 expected
relocations for an ARM rmodule:
- R_ARM_ABS32
- R_ARM_THM_PC22
- R_ARM_THM_JUMP24
R_ARM_ABS32 is the only type that needs to emitted for relocation
as the other 2 are relative relocations.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built vbootstub for ARM device.
Original-Change-Id: I0c22d4abca970e82ccd60b33fed700b96e3e52fb
Original-Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190922
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a642102ba7ace5c1829abe7732199eda6646950a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib3b3c90ebb672d8d6a537df896b97dc82c6186cc
Reviewed-on: http://review.coreboot.org/7204
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The LZMA compression algorithm, currently the only one available, will fail
if you ask it to write more data to the output than you've given it space for.
The code that calls into LZMA allocates an output buffer the same size as the
input, so if compression increases the size of the output the call will fail.
The caller(s) were written to assume that the call succeeded and check the
returned length to see if the size would have increased, but that will never
happen with LZMA.
Rather than try to rework the LZMA library to dynamically resize the output
buffer or try to guess what the maximal size the data could expand to is, this
change makes the caller simply print a warning and disable compression if the
call failed for some reason.
This may lead to images that are larger than necessary if compression fails
for some other reason and the user doesn't notice, but since compression
errors were ignored entirely until very recently that will hopefully not be
a problem in practice, and we should be guaranteed to at least produce a
correct image.
Original-Change-Id: I5f59529c2d48e9c4c2e011018b40ec336c4fcca8
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/187365
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit b9f622a554d5fb9a9aff839c64e11acb27785f13)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Change-Id: I5f59529c2d48e9c4c2e011018b40ec336c4fcca8
Reviewed-on: http://review.coreboot.org/6958
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
sizeof(char[]-type+1) isn't very useful. Since one of
the strings is constant, we also don't need to use
strncmp that string's length. While at it, str*cmp don't
return booleans, so check for value instead of faux bools.
Change-Id: Iebb194a60eac454dafeade75f135df92068cf4ab
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6988
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
We don't support them, they won't ever pass the build test,
so no need to report an error.
Change-Id: I2409a79f3c0d66a79b0e065e6b9ebf62d0359b3e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7121
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This didn't work for a while, and we don't _really_ need it.
Change-Id: I952243f30e985e7577cd511f40957066db6dd3c5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7120
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Since commit c0199078 (cbmem utility: Find actual CBMEM area) [1], at least on
the Lenovo X201, X230 and X60, printing the CBMEM table of contents did
not work. It still worked on the ASRock E350M1 though.
$ sudo /src/coreboot/util/cbmem/cbmem -l --verbose # Lenovo X60t
Looking for coreboot table at 0
Mapping 1MB of physical memory at 0x0.
Found!
coreboot table entry 0x11
Found forwarding entry.
Unmapping 1MB of virtual memory at 0xb74dc000.
Looking for coreboot table at 7f6c4000
Mapping 1MB of physical memory at 0x7f6c4000.
Found!
coreboot table entry 0xc8
coreboot table entry 0x01
Found memory map.
coreboot table entry 0x03
coreboot table entry 0x04
coreboot table entry 0x05
coreboot table entry 0x06
coreboot table entry 0x07
coreboot table entry 0x08
coreboot table entry 0x09
coreboot table entry 0x0a
coreboot table entry 0x16
Found timestamp table.
cbmem_addr = 7f7dd000
coreboot table entry 0x17
Found cbmem console.
cbmem_addr = 7f7de000
Unmapping 1MB of virtual memory at 0xb74dc000.
No coreboot CBMEM area found!
The address of the boot info record has to be used for checking, that reading
takes place in the bounds of the boot info record.
$ sudo ~/src/coreboot/util/cbmem/cbmem -l # Lenovo X60
CBMEM table of contents:
ID START LENGTH
[…]
Big thanks to David and Stefan for their help.
[1] http://review.coreboot.org/2117
Change-Id: I1eb09a6445d9ea17e1e16b6866dece74315d3c73
Found-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7093
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Originally the utility cbmem was just used for reading out the time
stamps and was later extented. The removed comment is currently at the
wrong place and `cbmem` does much more now, so that the comment is just
removed.
Change-Id: Ief1d7aef38a4b439e3e224e6e6c65f7aa57f821f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7091
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
RISCV is a new architecture. This change simply setups up xcompile
to detect and use RISCV compilers if they are found.
Change-Id: Iad1a88ef2e3c8dd1e601549aeca26fb29b2bc7ae
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7023
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
It's not been needed for years, is definitely not needed now
that cbfstool parses bzImages, and its presence keeps confusing
people.
Also, rewrite history. We never mentioned mkelfimage in the
documentation. Never, ever, ever.
Change-Id: Id96a57906ba6a423b06a8f4140d2efde6f280d55
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7021
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In order to enumerate CPU devices that are non-x86 (read: no lapic)
provide a generic 'cpu' device.
Change-Id: Ifeafdad8076935c3448784e6958117002509acbf
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6824
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It brings in useless dependencies, a weird autotools
configuration, and tons of pain everywhere.
Instead just build things ourselves.
Change-Id: I67f06e711cb9dcd594363bc1a4f99d3273074549
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6986
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When compression fails for whatever reason, the caller should know about it
rather than blindly assuming it worked correctly. That can prevent half
compressed data from ending up in the image.
This is currently happening for a segment of depthcharge which is triggering
a failure in LZMA. The size of the "compressed" data is never set and is
recorded as zero, and that segment effectively isn't loaded during boot.
Change-Id: Idbff01f5413d030bbf5382712780bbd0b9e83bc7
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/187364
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit be48f3e41eaf0eaf6686c61c439095fc56883cec)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6960
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently, rmodules with 0 relocations are not allowed. Fix this by skipping
addition of .rmodules section on 0 relocs.
Change-Id: I7a39cf409a5f2bc808967d2b5334a15891c4748e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/6774
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Add support for enabling different coreboot stages (bootblock, romstage and
ramstage) to have arm64 architecture. Most of the files have been copied over
from arm/ or arm64-generic work.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197397
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 033ba96516805502673ac7404bc97e6ce4e2a934)
This patch is essentially a squash of aarch64 changes made by
these patches:
d955885 coreboot: Rename coreboot_ram stage to ramstage
a492761 cbmem console: Locate the preram console with a symbol instead of a sect
96e7f0e aarch64: Enable early icache and migrate SCTLR from EL3
3f854dc aarch64: Pass coreboot table in jmp_to_elf_entry
ab3ecaf aarch64/foundation-armv8: Set up RAM area and enter ramstage
25fd2e9 aarch64: Remove CAR definitions from early_variables.h
65bf77d aarch64/foundation-armv8: Enable DYNAMIC_CBMEM
9484873 aarch64: Change default exception level to EL2
7a152c3 aarch64: Fix formatting of exception registers dump
6946464 aarch64: Implement basic exception handling
c732a9d aarch64/foundation-armv8: Basic bootblock implementation
3bc412c aarch64: Comment out some parts of code to allow build
ab5be71 Add initial aarch64 support
The ramstage support is the only portion that has been tested
on actual hardware. Bootblock and romstage support may require
modifications to run on hardware.
Change-Id: Icd59bec55c963a471a50e30972a8092e4c9d2fb2
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6915
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The aarch64 is not really an arm variant, it's sufficiently
different that it can be considered (for purposes of cbfs, certainly)
to be a new architecture.
Add a constant in cbfs.h and strings to correspond to it.
Note that with the new cbfstool support that we added earlier,
the actual use of aarch64 ELF files actually "just works" (at
least when tested earlier).
Change-Id: Ib4900900d99c9aae6eef858d8ee097709368c4d4
Reviewed-on: https://chromium-review.googlesource.com/180221
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f836e14695827b2667804bc1058e08ec7b297921)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6896
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In the process of rewriting cbfstool for ARM and using
a new internal API a regression was introduced that would
silently let you add an ARM payload into an x86 CBFS image
and the other way around. This patch fixes cbfstool to
produce an error in that case again.
Change-Id: I37ee65a467d9658d0846c2cf43b582e285f1a8f8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176711
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8f74f3f5227e440ae46b59f8fd692f679f3ada2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6879
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Install the BL1 and set up the checksum in the Makefile instead of relying on
post processing. Import the exynos checksum script, split it in two and
simplify it significantly. Stop putting the CBFS header in the midst of the
bootblock so that it can be checksummed before CBFS is put together. Stop
saving space for it and leaving an anchor in the bootblock which nobody looks
for.
Change-Id: Icbb5a5914ece60b2827433b6dc29d80db996ea6c
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179229
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit aa3a416705517c0a6ddfdeb19905ac8cafb33df1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
Change-Id: I3ad8eed42255db426987065190c197baead40673
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6836
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Windows bugchecks on this for a while, so we ifndef'd the free() call out.
Now some Linuxes (depending on their glibc) also fail on it, so just
remove the call altogether at the cost of some leaked memory (couple
hundred kilobytes) because tracking down the precise fix is too hard.
In case someone wants to fix it, valgrind sees the issues, so
revert this change and work on romcc's memory management until valgrind
is happy.
To get a fix in, provide a good explanation why your change is actually
the right way to fix it - for silencing valgrind, this change will do.
Change-Id: Iae3f847e09a0d7bcb8bb4f50983a1b0727570b23
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6846
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The Linux trampoline code does not set up the segment descriptors for
__BOOT_CS and __BOOT_DS as described in the Linux kernel
documentation:
... a GDT must be loaded with the descriptors for selectors
__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G
flat segment; __BOOT_CS must have execute/read permission, and
__BOOT_DS must have read/write permission;
This is not a problem when launching a Linux payload from coreboot, as
coreboot configures the segment descriptors at selectors 0x10 and
0x18. Coreboot configures these selectors in the ramstage to match
what the Linux kernel expects (see
coreboot/src/arch/x86/lib/c_start.S).
When the cbfs payload is launched in other environments, SeaBIOS for
example, the segment descriptors are configured differently and the
cbfs Linux payload does not work.
If the cbfs Linux payload is to be used in multiple environments
should the trampoline needs to take care of the descriptors that Linux
requires.
This patch updates the Linux trampoline code to configure the 4G flat
descriptors that Linux expects. The configuration is borrowed from
the descriptor configs in coreboot/src/arch/x86/lib/c_start.S for
selectors 0x10 and 0x18.
The linux_trampoline code is slightly refractored by defining the
trampoline entry address, 0x40000, as TRAMPOLINE_ENTRY_LOC. This
definition is moved into a separate header file, linux_trampoline.h.
This header file is now included by both the trampoline assembly
language code and the trampoline loader C code.
The trampoline assembly language code can now use TRAMPOLINE_ENTRY_LOC
as scratch space for the sgdt CPU instruction.
Testing Done:
Verified the Linux payload is booted correctly in the following
environments:
1. Coreboot -> Linux Payload
2. Coreboot -> SeaBIOS -> Linux Payload: (previously did not work)
Change-Id: I888f74ff43073a6b7318f6713a8d4ecb804c0162
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Reviewed-on: http://review.coreboot.org/6796
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
git can do lots of things by itself, no need to parse
its output and redo that.
Change-Id: Id2cdd2ea8d34c1ba2b0abddc88e1f3260d74f47d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6798
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The AMD Platform Security Processor (PSP) requires a Fletcher's
Checksum at the end of the PSP directory. This code implements
a Fletcher's Checksum by reading bytes from stdin and writes the
bytes back to stdout with a checksum inserted into the byte stream
at the appropriate offset.
This utility is used on PSP binaries during coreboot build.
Include a runtime debug option such that the command:
fletcher --print <file.bin >file_with_cksum.bin
will print out the computed checksum value for debugging. The
compile-time debug option is retained that allows -DDEBUG to
be added to the compilation line. This option has the same
effect as "--print".
Change-Id: I506a479d8204ca4f8267d53aa152ac4b473dbc75
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6676
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Apparently when I originally wrote this I confused myself to no end.
The code/data of an rmodule has a set memory size which is associated
with the .payload section. The relocation entries may increase the
overall footprint of the memory size if the rmodule has no bss but
a lot of relocations. Therefore, just compare relocation entries size
plus the file size of the .payload section with the memory size of the
paylod section. The .empty section is added only when we have not met
the final target size.
Change-Id: I5521dff048ae64a9b6e3c8f84a390eba37c7d0f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6767
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
When compiling coreboot for x86 on gcc the compiler is
free to pick whatever defaults it is using at the time of
gcc's compile/configuration when no -march is specified.
Not properly specifying -march then opens up the use of SSE
instructions for compilation units it should not be used such
as the SMM module as this module doesn't save/restore SSE
registers.
Change-Id: I64d4a6c5fa9fadb4b35bc7097458e992a094dcba
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172640
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit d49358f7959bb52c3e7ff67d37c21a1b294adf72)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6716
Tested-by: build bot (Jenkins)
The GPIO offset of '0x44 - GP_IO_SEL3' as specified in the pch.h header
is incorrectly reported as 'GPIO_SEL3'.
Change-Id: I56dcdda109d5f57ed45938d60b995807bdfb46b1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6459
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It's a more direct approach to get the file size.
Change-Id: If49df26bf4996bd556c675f3a673d0003b4adf89
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6594
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Generate the board-status repo URL by replacing the
last occurrence of "/coreboot" by "/board-status",
which works across repo URL schemes (gerrit provides
several).
Change-Id: Iccb53bde994be619c1436815e13741d63738edf7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6574
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Accept only one command line argument (the input file name); close input
stream both on error and on success; print more informative error messages
when files could not be opened.
Change-Id: Ib2f0622a332317d7a13f33f1e5787381804c43a9
Found-by: missing fclose()'s found by Cppcheck 1.65
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6573
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Still not lint-stable due to too many open issues, but
at least it doesn't try to touch files that aren't part
of the repository anymore.
Change-Id: I654b15480094c7731a7d0d17fa1622a0b41ac34a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6584
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The whitespace test only trips on files that are part
of the git index - in particular not temporary editor
files or other cruft that doesn't hurt anyone.
Change-Id: I793fcc773845ee02281d8614b07e9c5958126a5a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6582
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
[ $3 -eq 1 ] fails if no third argument is given.
[ "$3" -eq 1 ] still fails.
Doing a string comparison is robust across shells.
Change-Id: I3ee388fdbe51b7ab9344d86e67827654714d3191
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6576
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change-Id: I76ae5e294c157e73d07fd30cdb1c191d78efd5eb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6581
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
While the result will not be pretty (ie. ifdtool will
mis-parse string components longer than 255 characters),
at least it doesn't overflow stack variables anymore.
Change-Id: I263c5cf823a2d8a863dcece7c4ee0b26475f9fc4
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6562
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
The process probably terminates not much later, but in
case anyone reuses the function in something with
longer life-time, free unused resources.
Change-Id: I10c471ee3d9dc9a3ebf08fe4605f223ea59b990e
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6559
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Otherwise the following write might end up anywhere.
Change-Id: Ie42d984824e9308bd58b8bb905b6ea823543adf0
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6560
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Testing if an unsigned long is greater than ULONG_T_MAX isn't very
useful. The second half of the test checked for too small values
(ie. <= -ULONG_T_MAX).
In both cases errno is set to ERANGE, so just check for that.
Change-Id: I92bad9d1715673531bef5d5d5756feddeb7674b4
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6568
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
"cbfstool create -B bootblock -s size" (in this order)
would break bootblock selection.
Change-Id: I9a9f5660827c8bf60dae81b519c6f026f3aaa0f3
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6564
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The printing routines of the cbfs_payload_segment assumed the type
could be accessed in host order. Each of the fields need to be
converted to the host order before inspecting the fields. In addition,
this removes all the ntoh*() calls while processing the
cbfs_payload_segment structures.
cbfstool would crash adding entries or just printing entries
containing a payload when -v was passed on the command line.
Change-Id: Iff41c64a99001b9e3920e2e26828c5fd6e671239
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6498
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Running sconfig with four arguments where the third
does not match /-./ made sconfig use uninitialized
memory to build the output filename.
Change-Id: If4a147ff23771ca9b6a913605af60249be1ca3d0
Found-By: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6483
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Cppcheck 1.65 report the style style issue below.
[main.c:434]: (style) Variable 'link' is assigned a value that is never used.
So remove the variable `link` as it is not needed.
Change-Id: Ib77b80b74a70985a76eaa3247c4a43832ef23a59
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6488
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
When parsing a string to numbers, we don't need to copy it.
And when creating strings, we should eventually free them.
Change-Id: I9023fef6e97a1830bc68502be32e79879c1617d4
Found-By: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6484
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Check if the new file could in fact be opened before
writing to it.
Change-Id: I6b2d31bf5c18f657fca4dc14fee2f2d5a2e33080
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6477
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Filenames of 4091 bytes or more lead to a buffer overflow.
Change-Id: I1b4b3932af096f0fcbfb783ab708ed273d3a844e
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6476
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
mmap builds a new reference to the file, so the file
descriptor isn't necessary anymore. Close it.
Change-Id: I639fd13ff8f13cbdfce1d199d75744e56f2b19b3
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6475
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Let xcompile pass the list of architectures, given
that it already has it.
Change-Id: I565512d3bef987c9a4e48a39bfd88bacf0b65de9
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6254
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Valid invocations are when -s|b|k outputfile is missing (argc == 3)
and when it is followed by the file name (argc == 5); it's an error
when "outputfile" is missing (argc == 4) or when there are more
arguments than expected (argc > 5).
Fixes "Uninitialized argument value" error found by scan-build from
clang version 3.2-11.
Change-Id: I8c489863323eb60cbaa5e82a80f5d78a6ca893c2
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6378
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Change-Id: I92f816aa1351a295287ebbcc78665ac87c318c23
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
If the cbmem console buffer isn't zero filled before it's used, there won't be
a terminator at the end. We need to put one at the cursor position manually.
Change-Id: I69870c2b24b67ce3cbcd402b62f3574acb4c2a8f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65300
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8ec61e52a6a27ed518d0abb5a19d6261edf9dab1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6404
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Fix memory leak found by scan-build from clang version 3.2-11.
Change-Id: Id8f9db46cf42012a0eb0a632c9d83a4eec1989a2
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6379
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The cbfstool binary in util/ doesn't exist as often as build/cbfstool does.
Since cbfstool obtains details from coreboot.rom, use the binary in build/
Change-Id: Id7d5632f4e5cbd5ede58cd136c37b0dacee9ff93
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/6299
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
- Update some comments
- Whitespace fixes
- change from backticks to $() format for getting command data.
Change-Id: Iaf424224abfd30a3581d0e43a1689cc7c887beec
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6261
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
- Read the boot log from a serial device.
Change-Id: I9daf97fd9b7fc55d0d56d815b185f9b4e3ef9f5a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6260
Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
Tested-by: build bot (Jenkins)
- give a template to the temp dir so they're recognizable.
- show the location of the temp files again at the end of the script.
Change-Id: Ieb031ee249043697f6a75e42284c23d0b9bad1b3
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6259
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
- allow for cmd() to be run, but not pipe to a file.
Change-Id: I3e1650e421a49a06218e082ceb5a60b7b4808ce8
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6258
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
It just doesn't work to have files depend on their parent
directory: As soon as the files are written, the time stamp
of the directory changes, too.
This led to spurious updates of cbfstool and rmodtool, and
related "permission denied" errors when linker and build
system ran into each other.
Change-Id: I44a7d7b4b1d47a1567ece1f57dfd6745d05ee651
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6276
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
It's probably safe to say that .xcompile needs an update if
util/xcompile/xcompile changed, so tell make about this
dependency.
Updates are honored immediately due to GNU make's feature of
reinterpreting everything when an included file changes. See "How
Makefiles Are Remade" in the GNU make documentation for details.
Change-Id: Ide2f028eaddcee66028c6403688cc83e1622fa6b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6255
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This uses die() which was previously unused.
Before this change an unhelpful error message was printed when make tried
to parse English text as if it was part of the makefile:
.xcompile:1: *** missing separator (did you mean TAB instead of 8 spaces?). Stop.
After this change the first error message at least mentions that iasl is
missing:
ERROR: no iasl found
make: -print-libgcc-file-name: Command not found
make: -print-libgcc-file-name: Command not found
make: -print-libgcc-file-name: Command not found
/bin/sh: 0: Illegal option -
Makefile.inc:36: *** Please use the coreboot toolchain (or prove that your toolchain works). Stop.
Change-Id: I79d5de5993e3828460130192df376daa55f32aa0
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6272
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Spotted by building with Clang.
Change-Id: I7ab97278d8bd586a71e453c8cc9d26dd6938c8d2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Our include files reference CONFIG_xxx declarations, which we should
ignore for utility build.
We cannot include kconfig.h to get IS_ENABLED() as that file
would require build/config.h and we do not want to enforce a build
of the firmware to be able to build the utility.
Since we do not include build/config.h each occurence of CONFIG_xxx
in the included header files is undefined and will be treated as
disabled.
Change-Id: I74f1627fc3f294410db8ce486ab553dac9e967f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6066
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch supports northbridges: 0x0150 0x0154 0x0158 0x015c as 3rd gen core.
Tested on 0x0150 (0x0154 previously only model).
Change-Id: I53a33d864494dd4ac1cb9e8330450f56001ed92c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5873
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Commit 40e936a1 [1]
util/board_status/board_status.sh: Save ROM contents in `cbfs.txt`
creates `cbfs.txt` in `${tmpdir}` but does not move it to the results
directory `${tmpdir}/${results}`. So move it to the correct place.
[1] http://review.coreboot.org/5867
Change-Id: Ibca691ccf72b56b6271a611d92deaed7d377773b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5883
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The ROM content (CBFS content) captured with
cbfstool build/coreboot.rom print
is useful for two reasons.
1. With the used configuration for the build in `.config`, it can be
compared how the size for romstage and ramstage change over time. To
make that reproducible the used toolchain should also be stored
somewhere in the future.
2. With the CBFS content the time stamps can be better interpreted.
For example, the size of the payload file is needed to interpret the
time stamp for loading the payload.
Change-Id: If77ca6412b1710e560f405f9a48df613c1819d36
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5867
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
cbfstool fails to built under 32-bit platforms since commit
aa2f739a cbfs: fix issues with word size and endianness.
due to the use of '%ld' format specifier on size_t, which on these
platforms is only 32-bit.
No error is seen though, when cbfstool is built, when building a coreboot
image, where it is put in `build/cbfstool`.
Use the length modifier `z` for size_t arguments, and cast to size_t where
appropriate.
Change-Id: Id84a20fbf237376a31f7e4816bd139463800c977
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5388
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Allow overriding the build directly (default: coreboot-builds)
using the COREBOOT_BUILD_DIR variable, in addition to setting
it through the -o parameter.
This helps with build nodes where jenkins wants to run the
same command everywhere but allows different environment
variables.
Change-Id: If907897cf6ac01caa7d1e4b51aad4c005356bc5b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4543
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enough changed to warrant a new version, date,
and copyright.
Change-Id: Ia099cd4fec3b05efc3f8bac09d38baede1c719e0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5806
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A reasonable configuration that minimizes disk traffic
could be
$ abuild -o /tmp/abuild-$$ -z
Change-Id: Ic91798af7e799a40a77025e09a6078ea6758cdac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5805
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is useful on pure build nodes that don't care for
object files, just for a build log and success flag.
Change-Id: Ida65d4e41652af0f1b7255309aec2eeb6ef5c9ef
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5804
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have dupes in the tree for aliases,
board variants and the like,
for board-status reporting purposes.
But we don't need to build all of them.
Change-Id: Ic1c6415568800350bdc0db97471e3875d9eac98c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5776
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This drops the scan-build related Kconfig options
since it's now possible to simply run
scan-build [-o outdir] make
and get coreboot built with its report.
There's also no inner make process anymore, and the way
things work should be clearer now.
Also adapt abuild to this new reality.
Change-Id: I03e03334761ec83f718b3235ebf811834cd2e3e3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5774
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Some coreboot-builds/ and makes made their way into
abuild. Stop them.
Change-Id: I5784e1fd623ada30e2fadcc74a7da3ee75c5ee96
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5772
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Having more than the executable in $(CC) only leads to
trouble in a number of situations.
Change-Id: I7642ca4068b3a3bd5798219d74de9e0eb85bb4e5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5769
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Don't call things in xcompile i386 and in the
buildsystem x86_32 and then bridge things so
they match. just call it the same everywhere.
Change-Id: Ieef5f03f7aafb0b0a606fbe5a2386e310d2b0e94
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5766
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
no need to test for i386-eabi or armv7a-elf
Change-Id: Icbef5a64f5b793092ca0f94ee8f54bc896bf39ad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Change-Id: Id98afa956a2af7113a6ef848b436d661a1fa39f2
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5745
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
xcompile used to test for special ARM flags - that were
empty.
Meanwhile, -Wa,--divide, which is only useful on i386-elf
was tested for on arm and aarch64, too
Change-Id: I1a5a1bc40fa1040d0939038b073aef31c72d0c6f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5743
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
No need to test all the cross compiler things if
there's no host compiler or iasl.
Also test that the alternatives work, instead of
assuming iasl or cc are in the path.
Change-Id: I1d2293873f4bf1bb525d794851ec20adddb05ac6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5742
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I don't think all /bin/sh implement all features used
in xcompile.
Change-Id: Ida2a166242201ed0221316b123888127c83bf3c1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5740
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I11053456fd90cda07143b76de49c2804e38f06e0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5739
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For bzImages the trampoline segment is added unconditionally.
However, that segment wasn't properly being accounted for.
Explicitly add the trampoline segments like the other ones.
Change-Id: I74f6fcc2a65615bb87578a8a3a76cecf858fe856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5702
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This might break a bunch of stuff (eg. win32 support),
but otherwise introduces nconfig (ncurses based configuration
frontend), partial configuration headers for improved dependency
tracking (which requires some more build system support) and
various bug fixes.
Change-Id: I5d8a280810c6a26fc3fd056d5d94cb9e591a0ff5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5487
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
CONFIG_ARCH is a property of the cpu or soc rather than a property of the
board. Hence, move ARCH_* from every single board to respective cpu or soc
Kconfigs. Also update abuild to ignore ARCH_ from mainboards.
Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5570
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
It is not easy to see that there are two links,
one to coreboot wiki and second to the vendor page.
This change moves the vendor page link to the vendor
column, separating it nicely.
Change-Id: I3063be476231d04f833350043010a6e0001697e7
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/5593
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Unlike OSX 10.8, OSX 10.9 doesn't provide GNU tar program, and built-in
tar program is bsdtar 2.8.3. bsdtar can build crossgcc toolchain.
Modify buildgcc to support tar in OSX 10.9 (uname = Darwin).
Change-Id: I093898f8f99e29918387f9b275a30af461a7e1be
Signed-off-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-on: http://review.coreboot.org/5598
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.
Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The magic number mismatch was introduced by commit a8a133
(Add section header parsing and use it in the mk-payload step).
Change-Id: I73b0adb969816e9d130f19f48e175c57124e2f3a
Signed-off-by: Wei Hu <wei@aristanetworks.com>
Reviewed-on: http://review.coreboot.org/5528
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In some cases the build system tried to build main.c before
copying the various "shipped" files (lex/yacc output) where
the place the compiler expects them.
Make the dependency explicit.
Change-Id: Iacef5292aadb9fe7bc967aa4ab5ee6c9fe4df3d7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5510
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Also pass V=1 to the configuration step, if requested.
Change-Id: If8b413d65d6bac34efab63614d039d74d920c8db
Reviewed-on: http://review.coreboot.org/5492
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes a double free crash that occurs when a call to
cbfs_image_from_file() fails in cbfs_extract() and falls though to
cbfs_image_delete() with a NULL-pointer.
To reproduce the crash pass the following arguments where the files
passed, in fact, do not exist. As follows:
./cbfstool build/coreboot.rom extract -n config -f /tmp/config.txt
Change-Id: I2213ff175d0703705a0ec10271b30bb26b6f8d0a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5353
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In some cases the cbmem console can be larger than the default
mapping size of 1MiB. Therefore, add the ability to do a mapping
that is larger than the default mapping using map_memory_size().
The console printing code will unconditionally map the console based
on the size it finds in the cbmem entry.
Change-Id: I016420576b9523ce81195160ae86ad16952b761c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5440
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This change started with tracking down a bug where the trampoline
size was not being taken into account for sizing the output buffer
leading to a heap corruption. I was having a hard time keeping
track of what num_segments actually tracked as well as what parts
were being placed in the output buffer. Here's my attempt at
hopefully providing more clarity.
This change doesn't crash when adding a bzImage:
$ dd if=/dev/zero of=bb.bin bs=64 count=1
$ ./cbfstool tmp.rom create -s 4M -B bb.bin -m x86 -a 64
$ ./cbfstool tmp.rom add-payload -f ~/Downloads/bzImage -C "1" -n
"fallback"/payload
Change-Id: Ib1de1ddfec3c7102facffc5815c52b340fcdc628
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5408
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Datasheet: http://www.fintek.com.tw/files/productfiles/F71869_V1.1.pdf
Practically the same as F71869AD, just another ID (0x1408).
Tested on actual hardware, Jetway NC9C-550-LF.
Update:
Fixed F71869ED based on the proper datasheet:
http://www.alldatasheet.com/datasheet-pdf/pdf/459075/FINTEK/F71869ED.html
Change-Id: I5da858565ca16ba4d73b47b42fadd31dabbc290b
Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com>
Reviewed-on: http://review.coreboot.org/5380
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Fixed F71869AD based on the proper datasheet:
http://www.alldatasheet.com/datasheet-pdf/pdf/459074/FINTEK/F71869AD.html
Change-Id: If22341551c6a1a9bbae088801a6194f7b5b6bf4d
Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com>
Reviewed-on: http://review.coreboot.org/5405
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
The current implementation of creating rmodules relies
on invoking the linker in a certain manner with the
relocations overlaid on the BSS section. It's not really
surprising that the linker doesn't always behave the way
one wants depending on the linker used and the architecture.
Instead, introduce rmodtool which takes an ELF file as an
input, parses it, and creates a new ELF file in the format
the rmodule loader expects.
Change-Id: I31ac2d327d450ef841c3a7d9740b787278382bef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5378
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to generate rmodules in the format of ELF files
there needs to be support for writing out ELF files. The
ELF writer is fairly simple. It accpets sections that can
be associated with an optional buffer (file data). For each
section flagged with SHF_ALLOC a PT_LOAD segment is generated.
There isn't smart merging of the sections into a single PT_LOAD
segment.
Change-Id: I4d1a11f2e65be2369fb3f8bff350cbb28e14c89d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5377
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
GCC suppresses warnings about unused static functions if they are
inline, however Clang only does this for header files. None of these
MASK_ declarations are used, so just remove them.
Change-Id: Ia230beba3f6367237838d9b3d90536459e1d52cb
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5273
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Optionally parse the symbol table contained within an ELF
file. It currently assumes there is only one symbol table present,
and it errors out if more than one is found.
Change-Id: I4ac4ad03184a319562576d8ab24fa620e701672a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5376
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Optionally parse the string tables within an ELF file.
Change-Id: I89f9da50b4fcf1fed7ac44f00c60b495c35555ef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5375
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Optionally parse the relocation entries found within an ELF
file.
Change-Id: I343647f104901eb8a6a997ddf44aa5d36c31b44b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5374
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
In order to make the ELF parsing more flexible introduce
a parse_elf() function which takes a struct parsed_elf
parameter. In addition take a flags parameter which instructs
the ELF parser as to what data within the ELF file should be
parsed.
Change-Id: I3e30e84bf8043c3df96a6ab56cd077eef2632173
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5373
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
I was overzealous in checking the section size with respect
to the file size. That check makes no sense as the section only
deals with link sizes -- not on-disk sizes. Remove the check as
it doesn't make any sense.
Change-Id: I348e7847ae3a50badc22693439614f813462445a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5384
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
While parsing the section and program headers ensure the
locations of their contents are within the elf file proper.
Change-Id: I856f7de45f82ac15977abc06e51bedb51c58dde1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5372
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Though the result doesn't matter much, the callers of calloc()
should order the parameters correctly. i.e. the first paramter
is the number of elements in an array and the second is the
size of each element.
Change-Id: Ic7c2910d623d96f380feb4e5f6fa432376f49e9b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5371
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
elfparsing.h serves as the header to working with the elf
parser. Additionally, only include what is needed by the other
files. Many had no reason to be including elf.h aside from fixing
compilation problems when including cbfs.h.
Change-Id: I9eb5f09f3122aa18beeca52d2e4dc2102d70fb9d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5370
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The only user of iself() was in elfheaders.c. Move it there,
and make it local to the compilation unit.
Change-Id: I0d919ce372f6e2fce75885fb4fcba20d985979b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5369
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The elfheaders code was manipulating struct buffers. Use
the introduced buffer helper functions. Additionally fix
up offset and size checks for the program headers and section
headers by using common code paths.
Change-Id: I279c77f77aaa1860a0be43fb111df890dd1d84d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5368
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This reverts commit b845636ce6.
This commit changed the board status script to describe all boards in
terms of x86 terminology, such as CPU->southbridge->northbridge.
This terminology does not apply to a number of SoCs, in which the
buses are not connected via successive bridges, and as such it is
misleading and misguided to describe ideas of southbridge and
northbridge for these devices.
Change-Id: I98ba24ee00b816bf20d507c6d313ec2946acaedf
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5177
Tested-by: build bot (Jenkins)
There are some open-coded manipulation of the struct buffer
innards in the elf parsing code. Add helper functions to avoid
reaching into the struct itself.
Change-Id: I0d5300afa1a3549f87f588f976184e880d071682
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5367
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was already a bgets() function which operates on a buffer to
copy a byte stream. Provide bputs() to store a byte stream to a
buffer, thus making the API symmetrical.
Change-Id: I6166f6b68eacb822da38c9da61a3e44f4c67136d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5366
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide consistent usage provide the get8()
and put8() callbacks to xdr operations. That way no futzing
needs to be done to handle 8-bit reads and writes.
Change-Id: I1233d25df67134dc5c3bbd1a84206be77f0da417
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5365
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order for multiple tools to use the common code found
in common.c place the verbose variable within common.c's
compilation unit.
Change-Id: I71660a5fd4d186ddee81b0da8b57ce2abddf178a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5364
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Recent coreboot puts real tables in high memory and only pointer
is remaining at traditional location.
This patch makes lbtdump work with recent coreboot.
Change-Id: I1c4945909da16c0ec81e59c2d94d9a7d27e2aba5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4830
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Clang warns about comparisons of unsigned integers with being below
zero. Remove spurious logic checks that are always false.
Change-Id: I70c4d5331df81e48bf7ef27ff98400c4218f7edc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5275
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Remove a bunch of dead code which depends either on commented out
#defines, or compiler definitions. Use this opportunity to remove the
need for "-D_7ZIP_ST" in the compiler flags.
Change-Id: Ib6629002be7bf4cee6d95d7baa724893b5e8ba32
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5083
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There are five firmware regions that are (currently) defined. This
was assumed throughout the ifdtool code with many literal 4s and
5s. This patch changes them to refer to a new #define NUM_REGIONS.
Change-Id: I523d3763942f875025ebc4b9ba8b2ccf1db5b2f5
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5313
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The new option "--newlayout <file>" will read <file> in flashrom's
layout format and copy flash regions from the current flash image
file to a new flash image file.
If a region grows, the padding is added at the beginning of the target
region in the new file so that the data is "right-aligned" to the
end of the region.
If a region shrinks, a warning is given and the tail end of existing
data is copied to the target region in the new file.
Regions of zero or negative size are ignored. (In the example below
00fff000:00000fff regions are an artifact of the address encoding
in the register fields.)
Example Usage:
Given a flash image for a board with a Sandy Bridge processor and
Intel 6-Series chipset in the file vpx7654.bin
ifdtool --layout layout.txt vpx7564.bin
will yield the file layout.txt:
00000000:00000fff fd
00180000:003fffff bios
00001000:0017ffff me
00fff000:00000fff gbe
00fff000:00000fff pd
Notice that the "bios" portion extends to the end of the 4MB flash.
It may be edited to extend the bios portion to consume to the extent
of an 8MB flash. like layout2.txt:
00000000:00000fff fd
00180000:007fffff bios
00001000:0017ffff me
00fff000:00000fff gbe
00fff000:00000fff pd
ifdtool --newlayout layout.txt vpx7654.bin
will create a file vpx7654.bin.new that is 8MB.
Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5312
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Dump the Intel Flash Descriptor map in the format expected
by flashrom's "layout" option.
Example usage:
Given a 4MB flash image vpx7654.bin that was generated by Intel's
FITC tool for a 6-Series chipset...
./ifdtool --layout l.txt vpx7654.bin
cat l.txt
00000000:00000fff fd
00180000:003fffff bios
00001000:0017ffff me
00fff000:00000fff gbe
00fff000:00000fff pd
Change-Id: Ib740178ed6935b5f6e1dba1be674303f9f980429
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5306
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Refactor Makefile build system as decompartmentalise armv7a and i386
targets from crossgcc.
Change-Id: If93f62050810ba594c9925a9eb8ba9d04bc76459
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4008
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
These options seem to control the behavior of the encoder/decoder,
with comments citing a trade-off between memory usage and performance.
I removed these in a separate patch to make reverting in the future
easier, if we find these options are useful.
Change-Id: I24cb7101b89e60f4fb96777e3681c03d2a62e3d5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Rather than using [hn]to[nh] whenever accessing a member of the CBFS
header, deserialize the header when opening the CBFS image. The header
is no longer a pointer inside the CBFS buffer, but a separate struct,
a copy of the original header in a host-friendly format. This kills
more of the ntohl usage.
Change-Id: I5f8a5818b9d5a2d1152b1906249c4a5847d02bac
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5121
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This was designed as a micro-optimization for x86, but it is only used
once. Let the compiler decide if optimizing this is worth the effort.
Change-Id: I5939efa34f0e9d16643893ca04675247842e7db5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5085
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
LzmaEnc.c was full of shadow definitions. Luckily, shadow definitions
were not used after the scope in which they were redefined, so it is
possible to just remove them.
Tested by successfully booting qemu i440fx to grub2 payload.
Change-Id: I01d44db59882114ffe64434b655b931f3beec8e2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5082
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that we can set CC to an arbitrary compiler, fix issues that clang
finds. Luckily, there were only two trivial errors.
Change-Id: I0fd1f0f263a8ab7004f39cd36ed42d1a1cba5c04
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5081
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It was a typo.
Change-Id: I82964b5ed7e7749ba141aeb3ee8dc4c107bcd7a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5127
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
And use it in fit.c and remove one more use of htonl.
Change-Id: Ibf18dcc0a7f08d75c2374115de0db7a4bf64ec1e
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/5120
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When I changed mkpayload, I did not realize we had a duplicate
block of code in the linux payload code. Have it use the same
header generator as the standard payload code does.
Change-Id: Ie39540089ce89b704290c89127da4c7b051ecb0e
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/5115
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Now that unused functions have been removed, the global "arch" is only
used in very few places. We can pack "arch" in the "param" structure
and pass it down to where it is actually used.
Change-Id: I255d1e2bc6b5ead91b6b4e94a0202523c4ab53dc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5105
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
A lot of the early functions have been re-implemented in a context-
centric mode, rather than relying on global variables. Removing these
has the nice side-effect of allowing us to remove more global
variables.
Change-Id: Iee716ef38729705432dd10d12758c886d38701a8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5104
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is part of a larger effort to reduce global variable usage in
cbfstool. cbfstool_offset is particularly easy to hide since it's only
used in common.c .
Change-Id: Ic45349b5148d4407f31e12682ea0ad4b68136711
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5102
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It's not used anymore. Instead, we have the better replacements
cbfs_image_create() and cbfs_image_from_file().
Change-Id: I7835f339805f6b41527fe3550028b29f79e35d13
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5103
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This change adds a header serialization function. Programmers can thus just
set up a header as needed, without worrying about forgetting if and how to
use the [hn]to[hn]* functions.
In the long term, we will work to remove swab.h, i.e. we need to get to the
point where programmers don't have to try to remember [hn]to[nh]* and where
it goes. To date, even the best programmers we have have made an error with
those functions, and those errors have persisted for 6 or 7 years now. It's
very easy to make that mistake.
BUG=None
TEST=Build a peppy image and verify that it's bit for bit the same. All
chromebooks use this code and build and boot correctly.
BRANCH=None
Change-Id: I0f9b8e7cac5f52d0ea330ba948650fa0803aa0d5
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/181552
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/5100
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This completes the improvements to the ELF file parsing code. We can
now parse section headers too, across all 4 combinations of word size
and endianness. I had hoped to completely remove the use of htonl
until I found it in cbfs_image.c. That's a battle for another day.
There's now a handy macro to create magic numbers in host byte order.
I'm using it for all the PAYLOAD_SEGMENT_* constants and maybe
we can use it for the others too, but this is sensitive code and
I'd rather change one thing at a time.
To maximize the ease of use for users, elf parsing is accomplished with
just one function:
int
elf_headers(const struct buffer *pinput,
Elf64_Ehdr *ehdr,
Elf64_Phdr **pphdr,
Elf64_Shdr **pshdr)
which requires the ehdr and pphdr pointers to be non-NULL, but allows
the pshdr to be NULL. If pshdr is NULL, the code will not try to read
in section headers.
To satisfy our powerful scripts, I had to remove the ^M from an unrelated
microcode file.
BUG=None
TEST=Build a peppy image (known to boot) with old and new versions and verify they are bit-for-bit the same. This was also fully tested across all chromebooks for building and booting and running chromeos.
BRANCH=None
Change-Id: I54dad887d922428b6175fdb6a9cdfadd8a6bb889
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/181272
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/5098
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
When typedef is used with structs, enums, and to create new typenames,
readability suffers. As such, restrict use of typedefs only to
creating new data types.
The 80 character limit is intentionally ignored in this patch in order
to make reviewing easier.
Change-Id: I62660b19bccf234128930a047c754bce3ebb6cf8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5070
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Remove checks for MSVC version and references to windows types and
calling conventions. Calling conventions are not needed as functions
are not exported, like in a library.
Change-Id: I884a1502cf56b193de254f017a97275c8612c670
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4836
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The original lzma code was probably designed as a library, and had
tons of checks for __cplusplus and extern "C". They were not removed
when imported, but remove them now.
Change-Id: I4ae6e7739d191093c57130de8ae40da835e81bd1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4835
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is the first patch on a long road to refactor and fix the lzma
code in cbfstool. I want to submit it in small atomic patches, so that
any potential errors are easy to spot before it's too late.
Change-Id: Ib557f8c83f49f18488639f38bf98d3ce849e61af
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4834
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Add XDR functions and use them to convert the ELF headers
to native headers, using the Elf64 structs to ensure we accomodate
all word sizes. Also, use these XDR functions for output.
This may seem overly complex but it turned out to be much the easiest
way to do this. Note that the basic elf parsing function
in cbfs-mkstage.c now works over all ELF files, for all architectures,
endian, and word size combinations. At the same time, the basic elf
parsing in cbfs-mkstage.c is a loop that has no architecture-specific
conditionals.
Add -g to the LDFLAGS while we're here. It's on the CFLAGS so there is
no harm done.
This code has been tested on all chromebooks that use coreboot to date.
I added most of the extra checks from ChromeOS and they triggered a
lot of warnings, hence the other changes. I had to take -Wshadow back
out due to the many errors it triggers in LZMA.
BUG=None
TEST=Build and boot for Peppy; works fine. Build and boot for nyan,
works fine. Build for qemu targets and armv8 targets.
BRANCH=None
Change-Id: I5a4cee9854799189115ac701e22efc406a8d902f
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/178606
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/4817
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
After removing a file sandwiched between two other files, that file
could no longer be re-added at the same location. cbfstool tried to
add the file, and a new "empty" entry, which, together, would no
longer fit, so it continued checking for the next available space.
Change the behavior to add the file if there is enough space for the
file alone, then only add the "empty" entry if there is enough space
for it.
Change-Id: Iad3897dd28cf12f12ae877cfd83e1990fa7d2f0f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4772
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The LARCHIVE header isn't a string (not null terminated).
It confused coverity, and while it should be obvious that
we're not aiming for any null bytes after the header, we
can also just not pretend it's a string.
Change-Id: Ibd5333a27d8920b8a97de554f1cd27e28f4f7d0a
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4088
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
[[ is a bashism.
Change-Id: Ief7c43fc1740db32ed97850a415b0c256b5bb35a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4764
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
It's useless and makes clang unhappy.
Change-Id: If256b99aebabd87df30a3a078c5804330b82989b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4713
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The unusual construction ls + grep + while read fails
for unknown reason. Use standard for x in * consruction
instead.
Change-Id: Ibcdf5e18543587f71a605bae2d0df72b6a286a5b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4757
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
On bot, stderr is unmonitored, so it make no sense to stop with an error.
Instead use some sensible guesses.
Change-Id: I6292e9fbf446b751471b95f86e7515c6680bddf3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4748
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Up until now, we relied on mksunxiboot to prepend the header which
makes coreboot.rom bootable on Allwinner SoCs. If that tool was not
present, the build silently failed.
Integrate this tool into our util/ package, so that we do not have to
rely on mksunxiboot being in PATH.
Our version of mksunxiboot also eliminates some limitations of the
original tool, so we no longer have to use 'dd' to limit the file
size.
Change-Id: Id5a4b1e2a3cb00cd1d6c70e6cbc3cfd8587e8a24
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4656
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The rule has the target `junit.xml` and runs `make clean` and `make` and
logs the result in the file `junit.xml` suitable for consumption by
Jenkins.
Change-Id: I42a31f6c7a45fa9c3773969d78f745fcc4e09dbd
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4611
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This should probably propagate to the other lint checks.
The idea: only enforce style on files that were at least touched
by the developer.
Change-Id: I5ac690ee726e27e80e790fa9a41cd14b84ad2161
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4644
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The last few days of the year might belong to the first
week of the new year in the ISO week numbering scheme.
GNU date accounts for that with different-than-usual
notation.
Change-Id: I8047c197971077a845d6c1fdc9da6eb9f3741539
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4610
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cleanup() uses BUILDDIRPREFIX, which is set after the
getopt loop.
Change-Id: I8a904781ee4fefc42681d31e94b64008cf03750a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4544
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Make abuild -r work in more sitations (eg. xargs parallelization),
and make it not break junit output.
Also tell Kconfig to just overwrite the config file, instead of
atomically updating it, which help if coreboot-builds is on a
different filesystem (eg. tmpfs).
Change-Id: I2f4eedfd34ea6771732a60b38f1856056089be23
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4542
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: I9791beff44535a0a130292414fcd9875b497b1ca
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4492
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
During the update_fit step, 'file_length' is used to determine how many
bytes are left in the CBFS file. It was decremented in a loop from an
array 'mcus[num_mcus].size', but 'num_mcus' was incremented right before.
Since 'mcus' is memset(0) externally, 'file_length' was never decremented.
The loop exited when it reached a dummy terminator, usually 48 bytes of 0
which are internationally added to microcode blobs in coreboot. However,
if that terminator is removed, the loop doesn't stop and continues until
it segfaults.
Change-Id: I840727add69379ffef75b694d90402ed89769e3b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4508
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
If the unpacking was interrupt by Ctrl-C, probably part of
an archive is unpacked. If we run buildgcc again, the
incomplete folder would be and skipped.
We can create a file to tell the script the unpacking is done.
Change-Id: Id9eb74d119e22b62c70dca9b38a92c3dbdf0f64c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/4512
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Make boards take less vertical space, and link to board pages
Change-Id: Ifdd062a15191809b75422416c874161d9114363d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4493
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These were terribly under-documented
Change-Id: I285ea083110d87076281e81065f5f38d0c688358
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4491
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
We use junit style output these days.
Change-Id: I4110ec10bf0e9f4354ee08e7e1c5a81ae605fee0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4484
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
USE_XARGS mode builds n boards in parallel (with 1 CPU each) instead of
building 1 board with n CPUs.
This requires the main build system to work under such circumstances.
Change-Id: Ib4571a78dfe78fd61ae5b26c18be9745bd8b3d52
Reviewed-on: http://review.coreboot.org/4485
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This makes USE_XARGS-abuild unhappy due to races
Change-Id: I1237468366c7f8af7eacd572c2bd32df9a3d58ca
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4486
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The numbers alone are hard to parse, so add
some timestamp names to make it easier to read.
Change-Id: Ie32d3e7ca759bd15e7c160bdd829dec19943e6cb
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65333
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4314
Tested-by: build bot (Jenkins)
On ARM the timestamps are already in micro seconds, so
no need to convert them.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: If7363b0703e144bde62d9dab4ba845e1ace5bd18
Reviewed-on: https://gerrit.chromium.org/gerrit/63991
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4313
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It's a start...
Change-Id: Ibdb0b64ab0349df58bcad5ce553bf0dbec636925
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4483
Tested-by: build bot (Jenkins)
This also adds an option -x/--hexdump to dump the whole
CBMEM area for debugging.
Change-Id: I244955394c6a2199acf7af78ae4b8b0a6f3bfe33
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/62287
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4312
Tested-by: build bot (Jenkins)
on ARM the CBMEM utility requires the procfs entry
/proc/device-tree/firmware/coreboot/coreboot-table
provided by the FDT (dynamically created by depthcharge
at the moment)
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: If5f961afb23791af6f32dd4fc9a837a1aa41b70e
Reviewed-on: https://gerrit.chromium.org/gerrit/59322
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/4311
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The update-fit command takes in a parameter for number of slots
in the FIT table. It then processes the microcobe blob in cbfs
adding those entries to the FIT table. However, the tracking of
the number of mircocode updates was incremented before validating
the update. Therefore, move the sanity checking before an increment
of the number of updates.
Change-Id: Ie8290f53316b251e500b88829fdcf9b5735c1b0e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50319
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4161
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Commit b8ad224 changed the memory address in lb_cbmem_ref coreboot
table entries from a pointer to a uint64_t. This change was introduced
to make the cbmem utility work on both 32bit and 64bit userland.
Unfortunately, this broke the cbmem utility running on older versions
of coreboot because they were still providing a 32bit only field for
the address while the cbmem utility would now take the following 4
bytes as upper 32bits of a pointer that can obviously not be
mmapped. This change checks if the size of the lb_cbmem_ref structure
provided by coreboot is smaller than expected, and if so, ignore the
upper 32bit of the address read.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: If4c8e9b72b2a38c961c11d7071b728e61e5f1d18
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4139
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The field wasn't initialized in RAM first and later overwritten in a somewhat
twisted way (that relied on the size field coming after the tag field in the
struct).
Change-Id: Ibe931b297df51e3c46ae163e059338781f5a27e2
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4087
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This moves an ugly comment closer to where it is applicable and also
adds a visual break between the commands which gather data and the
part of the script that finishes up. I'm usually not fan of banner
comments, but it seemed to help in my totally subjective opinion.
I was thinking about how to break the part that uploads results into
a separate function, but there are enough variables that are re-used
from earlier parts that the tradeoff probably isn't worth it.
Change-Id: If888329911c4de3b907cdf5973695c707bbb02fe
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4051
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This allows the command wrappers to delete files if the command
fails. In particular, it delets empty or otherwise useless files
that are generated if a non-fatal command fails.
Change-Id: If26d7b4d7500f160edd1cc2a8b6218792fefae8b
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4050
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds cmd_nonfatal() for commands which are considered
non-essential and can be expected to fail safely. This can be used,
for example, to gather data that is generated when using non-standard
utilities or coreboot config options.
Change-Id: Ie43944d2eb73f9aae1c30c3a204cfc413e11d286
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4049
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is really only a cosmetic change, but is intended to make it
slightly easier to remember to update the help menu whenever
options change.
Change-Id: I58b5012309229d08da138a01c7cd1c5096423179
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4048
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Clobbering output is only really useful when debugging the script.
Since we're only using short options, let's save 'c' for something
more important.
Change-Id: If87a70fdc0cd006818d1736c40f9984dfec663a9
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4047
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is the first major re-work for the board status script.
Summary:
- Added a command to the getrevision.sh script to retrieve tagged
revision.
- Results are placed in a dynamically generated temporary location.
This makes it easy to do multiple trial runs and avoids polluting
the coreboot directory.
- Results are stored in a directory with the following form:
<vendor>/<mainboard>/<tagged_revision>/<timestamp>/
Vendor and mainboard are obtained from CONFIG_MAINBOARD_DIR so that
hierarchy is consistent between coreboot and board-status.
- The results directory is used as the commit message.
- board-status repository is checked out automatically if results are
to be uploaded.
TODO:
- Add ability to run commands which may fail. Currently we assume
any failure should terminate the script, but some commands can be
made optional.
Successfully uploaded first result to board-status repository. See
http://review.coreboot.org/gitweb?p=board-status.git;a=summary .
Change-Id: Icba41ccad4e6e6ee829b8092a2459c2d72a3365b
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4039
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Arrays are indexed 0..(number_of_element-1).
Change-Id: I2157e74340568636d588113d1d2d8cae50082da2
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4089
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This just moves stuff to be more clear about the purpose of
the script. Other suggestions are welcome.
Change-Id: Ic6095fd4eb347daa5a03eff21b5952d2d42a6bfd
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4038
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The tools for aarch64 on ubuntu are called
aarch64-linux-gnu-*
The type is
elf64-littleaarch64
This now finds the right files for building on aarch64
This has only been tested on ubuntu saucy; the aarch64 toolchain
is in a very ill-defined state on most distros.
Change-Id: Ic1bbd40f0d72384d6e80287b850686292a252918
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/4035
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The whitespaces make "git commit" failed.
lint-stable-003-whitespace
Check for superfluous whitespace in the tree
========
test failed:
File util/status/status.sh has lines ending with whitespace.
========
Change-Id: I52fc5ae3e5aa81dac098b36d2479e4d10325a09b
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/4032
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This reports relevant bits of information about a machine which is
running coreboot. This also includes a script to get revision info
from git, which we may want to split out into another patch.
A remote target can be specified since it is likely that the machine
used to develop the code is not the same machine being developed for.
The remote host must be set up for non-interactive root login.
Example: sh util/status/status.sh -r gizmoboard -u
Change-Id: Ief0a85faca2ec9ce2d270e1e5b09e74836ab0c97
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4021
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Some editors like gedit create auxiliary files ending with a
tilde '~'. As these are not checked into the Git repository, do
not check these for whitespace errors.
Change-Id: I2c4cf00f9d623be73ea3bbb7b2da4f1e1900c8e9
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3952
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
SeaBIOS’ Makefile requires cpp (C Preprocessor) to build. Modify
the xcompile script to search for cpp program path, and pass it to
SeaBIOS’ `Makefile.inc`. Also pass the program path for as (GNU assembler).
This is needed, so the crossgcc toolchain to build the SeaBIOS payload
under Mac OSX. OSX ships a cpp program, but it works differently
from GNU CPP, so we need to override it.
Change-Id: If996ffbb76ec4bd16079b54b41f3fac07bfe25be
Signed-off-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-on: http://review.coreboot.org/3896
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
`util/lint/lint-stable-002-build-dir-handling` always overwrites your
current `config.h` and `auto.conf` when the pre-commit hook is run. It
can be very confusing when your configuration is suddenly broken. So fix
it by not using the default build directory.
Change-Id: If2bbc97ac2f12a8203a3769d813386a023f93dd6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3593
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
gcc 4.8.x has issues with using ebp, which broke some builds,
so downgrade. The problem also manifested elsewhere, so it's
not necessarily our fault.
While at it, gcc complained about "armv7a" where it seems to
expect "armv7-a".
Change-Id: I6f0c35f49709cb41022475bb47116c12ab1c7ee3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/3930
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This simplifies debugging and also fixes an issue when build directories
are kept between buildgcc runs for different architectures.
Change-Id: I5badccd3368e3014680da3eedb607119fff8fa7f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3929
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Clean whitespace errors that have gotten past lint-stable-003-whitespace
and gerrit review.
Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3920
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The rule "-perm +111 -prune" matched any searchable directory
and did not recursively find files in them. The use of "+mode"
for -perm is deprecated.
Change-Id: I1b43f89ee9ab37928e56104b0f07241ff84b84c0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3921
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
It wasn't even hooked up to the build system anymore.
Change-Id: I4b962ffd945b39451e19da3ec2f7b8e0eecf2e53
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3892
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
In the great tradition of LinuxBIOS this allows adding
a kernel as payload. add-payload is extended to also
allow adding an initial ramdisk (-I filename) and a
command line (-C console=ttyS0).
Change-Id: Iaca499a98b0adf0134e78d6bf020b6531a626aaa
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3302
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
acpica-unix-20130626 doesn't use bin32 and bin64 to save the objects
any more.
Change-Id: I419ecc987e2adcd860a8ad1bf2f6b5c4dd40fd8a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/3885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This simplifies storing SeaBIOS parameters in CBFS.
Change-Id: I301644ba0d7a9cb5917c37a3b4ceddfa59e34e77
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/3733
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The raw CPUID is useful for matching the directories under 'src/cpu/intel'
and is not easy to find out otherwise because it is most often decoded
already. The decoded values are not obviously hexadecimal so prepend
them with 0x to make sure they are unambiguous.
The output differences look like this:
- CPU: Processor Type: 0, Family 6, Model 25, Stepping 2
+ CPU: ID 0x20652, Processor Type 0x0, Family 0x6, Model 0x25, Stepping 0x2
Change-Id: Id47f0b00f8db931f0000451c8f63ac1e966442c4
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3788
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Tested-by: build bot (Jenkins)
This is a trivial patch moving cpuid() call after reading argv
so that verbose is set.
Change-Id: Ic621191ef650495614a041413c1a0f707d4469e6
Signed-off-by: Benoît Legat <benoit.legat@gmail.com>
Reviewed-on: http://review.coreboot.org/3627
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The .dependencies rule did not use the CPPFLAGS variable which led
to funny behavior: a spurious termination message the first time
(after checkout/make distclean) one executes make. Afterwards the
(wrongly) empty .dependencies file hides the problem and the binary
is created anyway.
$ make
cbmem.c:37:34: fatal error: boot/coreboot_tables.h: No such file or directory
compilation terminated.
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cc cbmem.o -o cbmem
$ make
make: Nothing to be done for `all'.
$ make clean
rm -f cbmem *.o *~
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cc cbmem.o -o cbmem
$ make distclean
rm -f cbmem *.o *~
rm -f .dependencies
$ make
cbmem.c:37:34: fatal error: boot/coreboot_tables.h: No such file or directory
compilation terminated.
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cc cbmem.o -o cbmem
I fixed that by adding the CPPFLAGS variable to the .dependencies recipe, just
like Stefan Reinauer did in Chromium (Ia9d2e10a3ef122f30d681d16c2291eb108ead835),
hence the split sign-off for this tiny change. :)
Change-Id: Icd11b146ad762cbdf9774630b950f70e1253a072
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3548
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
abuild checks the path for toolchains prior to building a
mainboard. It didn't check xgcc/, which would be picked up
by the coreboot make, and fail to build when it shouldn't.
Change-Id: If0ca4238e8c57a6b015fdad623ccdbf237ef1ba6
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/3350
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This new tool called `ifdfake` just creates an empty Intel Firmware
Descriptor (IFD) and writes the IFD signature plus the section layout
given on the command line.
usage: ifdfake [(-b|-m|-g|-p) <start>:<end>]... <output file>
-b | --bios <start>:<end> BIOS region
-m | --me <start>:<end> Intel ME region
-g | --gbe <start>:<end> Gigabit Ethernet region
-p | --platform <start>:<end> Platform Data region
-h | --help print this help
<start> and <end> bounds are given in Bytes, the <end> bound is inclusive.
All regions must be multiples of 4K in size and 4K aligned.
The descriptor region always resides in the first 4K.
An IFD created with ifdfake won't work as a replacement for a real IFD.
Never try to flash such an IFD to your board!
The output of ifdfake can be utilized to build an image with just the
later added sections (like coreboot itself) being valid. The resulting
image can then be partially written to a machines flash ROM to just
update coreboot (i.e. the BIOS section).
Change-Id: I925b47cab5c6d490a79d684bdd7a7a45ac442640
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3523
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There are no files to build left under AMD nortbridge/x/root_complex
directories. For some cases, even the Kconfig file was no longer sourced.
Remove all such references and empty files.
For devicetree.cb treat component paths with "/root_complex" in them valid
even when the directory does not exists. This is because AMD boards us this
dummy chip component as the root node in their devicetree.cb.
The generated devicetree file static.c remains unchanged.
Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3434
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Also, add pretty printing of Westmere's DMI registers (tested on my t410s
by staring at non-zero output values :)
Apparently Nehalem does not have a MEMBAR? But there are some
documented memory controller control registers in PCI configuration
space... left out for now.
The PCIEXBAR is not documented publicly AFAICT, but there is
a similar register on a device on bus 0xFF. phcoder might know more...
Change-Id: I5faadb6e4f701728f5290276c02809b4993bd86d
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3505
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
e4e8e090fa does add support for QM57,
but there are many more that should work with that code(?).
Does not explode on...
CPU: Processor Type: 0, Family 6, Model 25, Stepping 2
Northbridge: 8086:0044 (1st generation (Westmere family) Core Processor)
Southbridge: 8086:3b0f (QS57)
Change-Id: I85e15ba45678a5bd635415a7a8d69c05bff8f7ef
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3321
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
This is spkmodem receiver counterpart.
Change-Id: Id27d32608502029fb6fcc8154f508811bf5ca77b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/3411
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
While some of the case .. break statement actually weren't needed,
too are, since otherwise the option parsing loop hangs.
Exit conditions for that endless loop: "--" or no more arguments,
in line with GNU command line parsing rules.
Change-Id: I0dbc35e530fb8c93a0f7de05ac47f325555ad4a4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3418
Tested-by: build bot (Jenkins)
Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Added support for Intel Atom cpu to msrtool
Fixed a cut&paste error in nehalem msr bits definition
It has been tested with a N455 cpu and msrtool output can be review at:
http://www.trillion01.com/coreboot/msrtool_atom.txt
Change-Id: I0ecf455b559185e2d16fa1a655bf021efc2ef537
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
Reviewed-on: http://review.coreboot.org/3351
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
viatool is a utility for extracting useful for extracting certain configuration
bits on VIA chipsets and CPUs. It is a fork of inteltool.
viatool is currently focused on "quirks". Quirks are device configurations that
cannot be accessed directly. They are implemented as hierarchical configurations
in the PCI or memory address spaces (index/data register pairs). Such
configurations refer to hardware parameters that are board specific. Those
parameters would otherwise be difficult to extract from a system running the
vendor's firmware.
viatool also preserves inteltool's MSR dumps. VIA CPU and Intel CPU MSRs are
nearly identical.
Change-Id: Icbd39eaf7c7da5568732d77dbf2aed135f835754
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/1430
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Bash case statements are terminated with ';;'.
Unlike C, bash case statements will not continue to the next case. No 'break' is needed.
Change-Id: I62e7e91f3223ac4052728a1ca12a4681af0dc036
Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Reviewed-on: http://review.coreboot.org/3330
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use PRIx64 to print a u64 instead of "llx". Fixes the following error:
cbmem.c: In function 'parse_cbtable':
cbmem.c:135:2: error: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'u64' [-Werror=format=]
Change-Id: Ibc2bf8597cb86db5b2e71fba77ec837a08c5e3d4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3301
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc has many wrong choices, and two right ones,
but you would never guess that. It's even more
frustrating when it spends lots of time building a
full tool chain and you find out it's not the one you
wanted and, still worse, you've forgotten what it does want
and, even worse, it won't f-ing tell you what the two
right choices are!.
Have it tell you when you've done something wrong, and have it
make reasonable decisions when you say things like
-p arm
instead of
-p armv7a-eabi
This change lowers my blood pressure 10 points.
Change-Id: I44a59d7cb7a6260894d8bcb692a693ed25681ff8
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3292
Tested-by: build bot (Jenkins)
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
=======
Cherry-picked from the Linux kernel.
Change-Id: I0c98760dd0f55cf2ff70c53e0b014288b59574c8
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3290
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box()
Makes the inputbox look like expected
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
=======
Cherry-picked from the Linux kernel.
Change-Id: I596915aab0204ef0e392fefa56fad8e25204e207
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3289
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
=======
Cherry-picked from the Linux kernel.
Change-Id: If0f00d1783907d606220cda5307b8960d3bfc38d
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3291
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
right now this is just a fake option to get rid of ifdefs in
coreboot's code.
Change-Id: I59233f3c1d266b4e716a5921e9db298c7f96751d
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3225
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
This option has never had much if any use. It solved a problem over 10
years ago that resulted from an argument over the value or lack thereof
of including all the debug strings in a coreboot image. The answer is
in: it's a good idea to maintain the capability to print all messages,
for many reasons.
This option is also misleading people, as in a recent discussion, to
believe that log messges are controlled at build time in a way they are
not. For the record, from this day forward, we can print messages at all
log levels and the default log level is set at boot time, as directed by
DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and
if you are having trouble override it in CMOS and get more messages.
Besides, a quick glance shows it's always set to max (9 in this case) in
the very few cases (1) in which it is set.
Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3188
Tested-by: build bot (Jenkins)
We write CMOS data to 128 byte files, which is a problem
when using them later-on (eg. as part of a coreboot image)
where nvramtool assumes them to be 256 byte, and so data
corruption occurs.
Change-Id: Ibc919c95f6d522866b21fd313ceb023e73d09fb9
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/3186
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update crossgcc to use gcc 4.7.3
The resulting coreboot.rom is not runtime tested (any volunteers?).
Drop the texinfo patch, rename the armv7a patch.
Some Linux distributions have moved on to gcc 4.8,
under certain circumstances this version can't (cross-)compile gcc 4.7.2
Bug report: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=56927
Change-Id: Id8ce5f86c34e1a0900d44dc6ae4e81cb9548ecc2
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3112
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
cbmem currently fails to build due to `-Werror` and the following
warning.
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cbmem.c: In function ‘map_memory’:
cbmem.c:87:2: error: format ‘%zx’ expects argument of type ‘size_t’, but argument 2 has type ‘off_t’ [-Werror=format]
[…]
Casting the argument of type `off_t` to `intmax_t` and using the
length modifier `j`
$ man 3 printf
[…]
j A following integer conversion corresponds to an intmax_t or uintmax_t argument.
[…]
instead of `z` as suggested in [1] and confirmed by stefanct and
segher in #coreboot on <irc.freenode.net>, gets rid of this warning
and should work an 32-bit and 64-bit systems, as an `off_t` fits
into `intmax_t`.
[1] http://www.pixelbeat.org/programming/gcc/int_types/
Change-Id: I1360abbc47aa1662e1edfbe337cf7911695c532f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3083
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When building inteltool with Clang, it warns about the following.
$ clang --version
Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2)
Target: i386-pc-linux-gnu
Thread model: posix
$ CC=clang make
[…]
clang -O2 -g -Wall -W -c -o pcie.o pcie.c
pcie.c:297:40: warning: signed shift result (0xFF0000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
pciexbar_phys = pciexbar_reg & (0xff << 28);
~~~~ ^ ~~
pcie.c:301:41: warning: signed shift result (0xFF8000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
pciexbar_phys = pciexbar_reg & (0x1ff << 27);
~~~~~ ^ ~~
pcie.c:305:41: warning: signed shift result (0xFFC000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
pciexbar_phys = pciexbar_reg & (0x3ff << 26);
~~~~~ ^ ~~
3 warnings generated.
[…]
Specifying the length by using the suffix `0xffULL` fixes these issues
as now enough bits are available.
These issues were introduced in commit 1162f25a [1].
commit 1162f25a49
Author: Stefan Reinauer <stepan@coresystems.de>
Date: Thu Dec 4 15:18:20 2008 +0000
Patch to util/inteltool:
* PMBASE dumping now knows the registers.
* Add support for i965, i975, ICH8M
* Add support for Darwin OS using DirectIO
[1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=1162f25a49e8f39822123d664cda10fef466b351
Change-Id: I7b9a15b04ef3bcae64e06266667597d0f9f07b79
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3015
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now users can use a different compiler from GCC like Clang by for example
doing `CC=clang make`.
Change-Id: I664a36df79f7496a56d89bdb61948b2eda33a6b4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3082
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In [1] Idwer Vollering noted, that the type `u64` is not portable so
on his FreeBSD system, the following warning is shown.
$ clang -O2 -Wall -W -I/usr/local/include -c -o amb.o amb.c
amb.c:441:22: error: use of undeclared identifier 'u64'
ambconfig_phys = ((u64)pci_read_long(dev16, 0x4c) << 32) |
The type `uint64_t` seems to be defined also on FreeBSD, so using this
fixes the warning.
Note, this warning is not reproducable with Debian Sid/unstable for
example. I have no idea why though.
[1] http://review.coreboot.org/#/c/3015/
Change-Id: Ic22f4371114b68ae8221d84a01fef6888d43f365
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3086
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Currently on a 32-bit system cbmem fails to build due to `-Werror`
and the following warning.
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
[…]
cbmem.c: In function ‘parse_cbtable’:
cbmem.c:135:2: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘u64’ [-Werror=format]
cc1: all warnings being treated as errors
[…]
Using the length modifier `ll` instead of `l` gets rid of this
warning.
Change-Id: Ib2656e27594c7aaa687aa84bf07042933f840e46
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Cppcheck warns about a memory leak, present since adding romtool,
which was renamed to cbfstool, in commit 5d01ec0f.
$ cppcheck --version
Cppcheck 1.59
[…]
[cbfs-mkstage.c:170]: (error) Memory leak: buffer
[…]
Indeed the memory pointed to by `buffer` is not freed on the error path,
so add `free(buffer)` to fix this.
Change-Id: I6cbf82479027747c800c5fe847f20b779e261ef4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3069
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The URL to acpica-unix-20121114 has changed, update the URL.
Change-Id: I1c8c228094f19455af3682f36f1990586fe3934c
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3070
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Current code outputs the whole cbmemc buffer even if only part of
it is really used. Fix it to output only the used part and notify
the user if the buffer was too small for the required data.
Change-Id: I68c1970cf84d49b2d7d6007dae0679d7a7a0cb99
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/2991
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The LZMA glue code in cbfstool was recently rewritten from C++
to plain C code in:
commit aa3f7ba36e
Author: Stefan Reinauer <reinauer@chromium.org>
Date: Thu Mar 28 16:51:45 2013 -0700
cbfstool: Replace C++ code with C code
Reviewed-on: http://review.coreboot.org/3010
In the progress of doing so, the stream position for the
input stream and output stream was not reset properly. This
would cause LZMA producing corrupt data when running the
compression function multiple times.
Change-Id: I096e08f263aaa1931517885be4610bbd1de8331e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3040
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This fixes at least one warning on my machine where "llx" is replaced by PRIx64.
Change-Id: Iee3e5027d327d4d5f8e6d8b2d53d051f74bfc354
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3024
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Cppcheck [1], a static code analysis tool, warns about the
following.
$ cppcheck --version
Cppcheck 1.59
$ cppcheck --enable=all .
[…]
Checking cpu.c...
[cpu.c:951]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list.
[cpu.c:962]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list.
[…]
And indeed, `core` is an unsigned integer and `man 3 printf` tells
the following about conversion specifiers.
d, i The int argument is converted to signed decimal notation. […]
o, u, x, X
The unsigned int argument is converted to unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal (x and X)
notation.
So use `u` and Cppcheck does not complain anymore.
[1] http://cppcheck.sourceforge.net/
Change-Id: If8dd8d0efe75fcb4af2502ae5100e3f2062649e4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3026
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Nico Huber spotted [1], that commit (4d6ab4e2) [1] updating
superiotools’s `README` with the Git command line
superiotool: Update README with Git repository URL and directory location
missed, that after `git clone` one sitll has to change into
the cloned directory.
So prepend the path with `coreboot/` to fix that. The same error
happened in the commit (e1ea5151) for libpayload [2]
libpayload: Update README with Git repository URL and directory location
and is fixed in this patch too.
[1] http://review.coreboot.org/#/c/3019/
[2] http://review.coreboot.org/2228
Change-Id: Ib6e8b678af6276556a40ccfd52ae35ca7e674455
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3021
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
When building inteltool under x86-32, the following warnings are
shown.
$ gcc --version
gcc-4.7.real (Debian 4.7.2-15) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
[…]
amb.c: In function ‘amb_read_config32’:
amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config16’:
amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config8’:
amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
[…]
Nico Huber commented the following [1].
I don't see those warnings because I build for x86-64. I guess
they could be fixed by casting to `ptrdiff_t` (from stddef.h)
instead of `uint64_t`.
And indeed, using `ptrdiff_t` fixes the warning. But as Stefan
Reinauer commented in [2], `intptr_t` is more appropriate as this
is just a pointer and no pointer difference.
So `intptr_t` is taken, which fixes these issues warned about too.
These warnings were introduced in commit »inteltool: Add support for
dumping AMB registers« (4b7b320f) [3].
[1] http://review.coreboot.org/#/c/2996/1//COMMIT_MSG
[2] http://review.coreboot.org/#/c/3002/1/util/inteltool/amb.c
[3] http://review.coreboot.org/525
Change-Id: I2ea1a31dc1e3db129e767d6a9e0433fd75a77d0f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3002
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
When buidling inteltool with GCC, the following warning is printed.
$ make
[…]
gcc -O2 -g -Wall -W -c -o memory.o memory.c
memory.c: In function ‘print_mchbar’:
memory.c:287:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ [-Wformat]
[…]
This was introduced in commit »inteltool: Add support for H65 Express
chipset« (c7fc4422) [1].
Address this warning, by using `%llx` instead of `%lx`.
[1] http://review.coreboot.org/1258
Change-Id: I4f714edce7e8b405e1a7a417d02fa498322c88a8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2994
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
cbfstool was using a C++ wrapper around the C written LZMA functions.
And a C wrapper around those C++ functions. Drop the mess and rewrite
the functions to be all C.
Change-Id: Ieb6645a42f19efcc857be323ed8bdfcd9f48ee7c
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3010
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The help text says --machine, but the code
actually checked for --arch. Fix it!
Change-Id: Ib9bbf758b82ef070550348e897419513495f154b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3009
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Allow to override the variables `CC`, `INSTALL`, `PREFIX`,
`CFLAGS` and `LDFLAGS`. Though append `-lpci -lz` to `LDFLAGS`.
This way for example a different compiler can easily be used.
CC=clang make
As a side note, Clang in contrast to GCC does *not* issue the
following warnings.
$ clang --version
Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2)
Target: i386-pc-linux-gnu
Thread model: posix
$ gcc --version
gcc-4.7.real (Debian 4.7.2-15) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
[…]
amb.c: In function ‘amb_read_config32’:
amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config16’:
amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config8’:
amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
[…]
These are only shown under 32-bit and not 64-bit
$ uname -m
i686
and are going to be fixed in a separate patch.
Change-Id: Id75dea081ecb35390f283520a7e5dce520f4c98d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2996
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds the power management register definitions for Intel's Cougar
Point and Panther Point platform controller hubs (PCH). The definitions
are actually a subset of the older ICH10R registers: I've added just
those that are mentioned in the public specifications in [1] and [2].
I've tested dumping with an H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: Ia6945fe96cd96b568ed5191e91dbba5556e1ee95
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds the PCI IDs of Intel's Cougar Point and Panther Point platform
controller hubs (PCH) to the dumping of the root complex configuration
under the root complex base address (RCBA). Those PCHs are handled exactly
as the older ICHs which can be seen in [1] and [2]. I've tested dumping
with an H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: I2296caae57e614171300362d41715deecec77762
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2986
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This way for example a different compiler can easily be used.
CC=clang make
Change-Id: I50b83554fd4826d00d87e60a30eb1f6a88834397
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2935
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds the GPIO register definitions for Intel's Cougar Point and
Panther Point platform controller hubs (PCH). All information is taken
from the public specifications in [1] and [2]. I've tested it with an
H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: I31711e24f852e68b3c113e3bd9243dc7e89ac197
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2961
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds correspondings #defines for the PCI IDs of the LPC device on
Intel's Cougar Point and Panther Point platform controller hubs. Those
will be used more in later commits.
I've checked all those IDs against the specification updates [1] and [2].
[1] Intel 6 Series Chipset and Intel C200 Series Chipset Specification
Update
Document-Number: 324646-019
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH)
Family - Datasheet Specification Update
Document-Number: 326777-010
Change-Id: Ibef5a30d283c568c345eb8d8149723e7a3049272
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2960
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If you have a recent version of texinfo installed, building the reference
toolchain fails with the following error:
(in util/crossgcc/build-gcc/crossgcc-build.log)
[...]/gcc-4.7.2/gcc/doc/cppopts.texi:806: @itemx must follow @item
Looks like a warning-became-an-error problem in texinfo, to me. Fix that by
making every erroneous @itemx an @item.
Change-Id: I685ae1ecfee889b7c857b148cfab7411a10e7ecd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2939
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Add support for filling in the Firmware Interface Table.
For now it only supports adding microcode entries.
It takes 2 options:
1. Name of file in cbfs where the mircocode is located
2. The number of empty entries in the table.
Verified with go firmware tools. Also commented out updating
microcode in the bootblock. When romstage runs, the CPUs indicate
their microcode is already loaded.
Change-Id: Iaccaa9c226ee24868a5f4c0ba79729015d15bbef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2712
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
- The read-only structures are const now
- cosmetic fixes
- put { on a new line for functions
- move code after structures
Change-Id: Ib9131b80242b91bd5105feaebdf8306a844da1cc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2922
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
In commit e820e5cb3a titled
"Make xcompile support multiple architectures" the LINKER_SUFFIX
variable was introduced to bypass gold if the bfd linker was
available. However, the LINKER_SUFFIX wasn't honored when
the compiler evironment variables were set. Fix the original
intention.
Change-Id: I608f1e0cc3d0bea3ba1e51b167d88c66d266bceb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When calculating initial CBFS empty entry space, the size of header itself must
be not included (with the reserved space for entry name). This is a regression
of the old cbfstool size bug.
Before this fix, in build process we see:
OBJCOPY cbfs/fallback/romstage_null.bin
W: CBFS image was created with old cbfstool with size bug.
Fixing size in last entry...
And checking the output binary:
cbfstool build/coreboot.pre1 print -v -v
DEBUG: read_cbfs_image: build/coreboot.pre1 (262144 bytes)
DEBUG: x86sig: 0xfffffd30, offset: 0x3fd30
W: CBFS image was created with old cbfstool with size bug.
Fixing size in last entry...
DEBUG: Last entry has been changed from 0x3fd40 to 0x3fd00.
coreboot.pre1: 256 kB, bootblksz 688, romsize 262144, offset 0x0 align: 64
Name Offset Type Size
(empty) 0x0 null 261296
DEBUG: cbfs_file=0x0, offset=0x28, content_address=0x28+0x3fcb0
After this fix, no more alerts in build process.
Verified to build successfully on x86/qemu and arm/snow configurations.
Change-Id: I35c96f4c10a41bae671148a0e08988fa3bf6b7d3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfstool usage change:
"-a" for "cbfstool locate" can specify base address alignment.
To support putting a blob in aligned location (ex, microcode needs to be aligned
in 0x10), alignment (-a) is implemented into "locate" command.
Verified by manually testing a file (324 bytes) with alignment=0x10:
cbfstool coreboot.rom locate -f test -n test -a 0x10
# output: 0x71fdd0
cbfstool coreboot.rom add -f test -n test -t raw -b 0x71fdd0
cbfstool coreboot.rom print -v -v
# output: test 0x71fd80 raw 324
# output: cbfs_file=0x71fd80, offset=0x50, content_address=0x71fdd0+0x144
Also verified to be compatible with old behavior by building i386/axus/tc320
(with page limitation 0x40000):
cbfstool coreboot.rom locate -f romstage_null.bin -n romstage -P 0x40000
# output: 0x44
cbfstool coreboot.rom locate -f x.bin -n romstage -P 0x40000 -a 0x30
# output: 0x60
Change-Id: I78b549fe6097ce5cb6162b09f064853827069637
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2824
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
cbfstool usage change:
The "-a" parameter for "cbfstool locate" is switched to "-P/--page-size".
The "locate" command was used to find a place to store ELF stage image in one
memory page. Its argument "-a (alignment)" was actually specifying the page size
instead of doing memory address alignment. This can be confusing when people are
trying to put a blob in aligned location (ex, microcode needs to be aligned in
0x10), and see this:
cbfstool coreboot.rom locate -f test.bin -n test -a 0x40000
# output: 0x44, which does not look like aligned to 0x40000.
To prevent confusion, it's now switched to "-P/--page-size".
Verified by building i386/axus/tc320 (with page limitation 0x40000):
cbfstool coreboot.rom locate -f romstage_null.bin -n romstage -P 0x40000
# output: 0x44
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Change-Id: I0893adde51ebf46da1c34913f9c35507ed8ff731
Reviewed-on: http://review.coreboot.org/2730
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
This is a bit of a hack but it's very handy. It compiles in your static.c
and then shows what coreboot would see when it is run. It uses your static.c
and functions pulled from src/device/device_util.c.
I've already used it to debug problems with the snow device tree.
I'm waiting someone to tell me this is already written :-)
Change-Id: Ia8c8a5d08d8757bec49eaf70473efa701bc56581
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2767
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Instead of trying to map the first megabyte, only map what is
required to read the tables.
Change-Id: I9139dbc8fd1dd768bef7ab85c27cd4c18e2931b3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2485
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Instead, ignore them. One is as non-standard as the other
and ignoring is more convenient since we don't need to
guard prototypes with #ifndef __ROMCC_ all the time.
Change-Id: I7be93a2ed0966ba1a86f0294132a204e6c8bf24f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2424
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
The "offset" in cbfs-mkpayload should be printed as type %lu
instead of %d as `gcc` rightfully warns about.
gcc -g -Wall -D_7ZIP_ST -c -o /srv/filme/src/coreboot/util/cbfstool/cbfs-mkpayload.o cbfs-mkpayload.c
cbfs-mkpayload.c: In function ‘parse_fv_to_payload’:
cbfs-mkpayload.c:284:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
cbfs-mkpayload.c:296:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
This warning was introduced in the following commit.
commit 4610247ef1
Author: Patrick Georgi <patrick@georgi-clan.de>
Date: Sat Feb 9 13:26:19 2013 +0100
cbfstool: Handle alignment in UEFI payloads
Reviewed-on: http://review.coreboot.org/2334
Change-Id: I50c26a314723d45fcc6ff9ae2f08266cb7969a12
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2440
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The name lapic_cluster is a bit misleading, since the construct is not local
APIC specific by concept. As implementations and hardware change, be more
generic about our naming. This will allow us to support non-x86 systems without
adding new keywords.
Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2377
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The name pci_domain was a bit misleading, since the construct is only
PCI specific in a particular (northbridge/cpu) implementation, but not
by concept. As implementations and hardware change, be more generic
about our naming. This will allow us to support non-PCI systems without
adding new keywords.
Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2376
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
On hosts using non-GNU make as default make program (ex, FreeBSD's default is
BSD make and having GNU make as "gmake"), building acpica will fail. We should
use the correct path of make $(MAKE).
Verified to build on FreeBSD 9.0 with gcc 4.7 from ports. Note, the shipped gcc
in FreeBSD 9.0 is 4.2.1 and needs more patches to remove -Wbad-function-case and
-Wempty-body. That should be fixed in a future patch.
Change-Id: Iacbf5a05e84a8a53d9d3e783a10131de603282c9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tiano for X64 is much cleaner to start up when using higher alignments in
firmware volumes. These are implemented using padding files and sections
that cbfstool knew nothing about. Skip these.
Change-Id: Ibc433070ae6f822d00af2f187018ed8b358e2018
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2334
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On platforms with CBFS data filling end of ROM image without bootblock in the
end (ex, ARM), calculation of "next valid entry" may exceed ROM image buffer in
memory and raise segmentation fault when we try to compare its magic value.
To fix this, always check if the entry address is inside ROM image buffer.
Verified to build and boot successfully on qemu/x86 and armv7/snow.
Change-Id: I117d6767a5403be636eea2b23be1dcf2e1c88839
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2330
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In case that the new toolchains don't work well, we can trace back
and reproduce the old tools by checking the xgcc folder. It is useful
when my team members need to get my old toolchains on their own host
machines.
Change-Id: I54e4bc6afcfbbf622165af6eae27bbb6efc2e8cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2247
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
For arm/snow, current bootblock is larger than previously assigned CBFS offset
and will fail to boot. To prevent this happening again in future, cbfstool now
checks if CBFS will overlap bootblock.
A sample error message:
E: Bootblock (0x0+0x71d4) overlap CBFS data (0x5000)
E: Failed to create build/coreboot.pre1.tmp.
arm/snow offset is also enlarged and moved to Kconfig variable.
Change-Id: I4556aef27ff716556040312ae8ccb78078abc82d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2295
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Right now cbfstool only accepts firmware volumes with
a x86 SEC core and refuses an x86-64 SEC core because
some magic values and the extended PE header are
different. With this patch, both IA32/x64 images are
supported. (No check is done whether the mainboard
actually supports 64bit CPUs, so careful!)
This needs another patch to Tiano Core that switches
to long mode after jumping to the 64bit entry point.
Right now that code assumes we're already in 64bit code
and the machine crashes.
Change-Id: I1e55f1ce1a31682f182f58a9c791ad69b2a1c536
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2283
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This removes the hack implemented in http://review.coreboot.org/#/c/2280
(and should make using 64bit Tiano easier, but that's not yet supported)
Change-Id: Ie30129c4102dfbd41584177f39057b31f5a937fd
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
add-payload, add-stage, and add-flat-binary are now all using cbfs_image API.
To test:
cbfstool coreboot.rom add-stage -f FILE -n fallback/romstage -b 0xXXXX
cbfstool coreboot.rom add-payload -f FILE -n fallback/pyload
And compare with old cbfstool.
Verified to boot on ARM(snow) and X86(qemu-i386).
Change-Id: If65cb495c476ef6f9d90c778531f0c3caf178281
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2220
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The "add" command is compatible with all legacy usage. Also, to support
platforms without top-aligned address, all address-type params (-b, -H, -l) can
now be ROM offset (address < 0x8000000) or x86 top-aligned address (address >
0x80000000).
Example:
cbfstool coreboot.rom add -f config -n config -t raw -b 0x2000
cbfstool coreboot.rom add -f stage -n newstage -b 0xffffd1c0
Verified boot-able on both ARM(snow) and x86(QEMU) system.
Change-Id: I485e4e88b5e269494a4b138e0a83f793ffc5a084
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2216
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Usage Changes: To support platforms with different memory layout, "create" takes
two extra optional parameters:
"-b": base address (or offset) for bootblock. When omitted, put bootblock in
end of ROM (x86 style).
"-H": header offset. When omitted, put header right before bootblock,
and update a top-aligned virtual address reference in end of ROM.
Example: (can be found in ARM MAkefile):
cbfstool coreboot.rom create -m armv7 -s 4096K -B bootblock.bin \
-a 64 -b 0x0000 -H 0x2040 -o 0x5000
Verified to boot on ARM (Snow) and X86 (QEMU).
Change-Id: Ida2a9e32f9a459787b577db5e6581550d9d7017b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2214
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To support platforms without top-aligned address mapping like ARM, "locate"
command now outputs platform independent ROM offset by default. To retrieve x86
style top-aligned virtual address, add "-T".
To test:
cbfstool coreboot.rom locate -f stage -n stage -a 0x100000 -T
# Example output: 0xffffdc10
Change-Id: I474703c4197b36524b75407a91faab1194edc64d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2213
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Old cbfstool may produce CBFS image with calculation error in size of last empty
entry, and then corrupts master header data when you really use every bit in
last entry. This fix will correct free space size when you load ROM images with
cbfs_image_from_file.
Change-Id: I2ada319728ef69ab9296ae446c77d37e05d05fce
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2211
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To delete a component (file) from existing CBFS ROM image.
To test:
cbfstool coreboot.rom remove -n fallback/romstage
# and compare with old cbfstool output result.
Change-Id: If39ef9be0b34d8e3df77afb6c9f944e02f08bc4e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2208
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change the "extract" command to use cbfs_export_entry API. Nothing changed in
its usage.
To verify, run "cbfstool coreboot.rom extract -f blah -n blah" and check if the
raw type file is correctly extracted.
Change-Id: I1ed280d47a2224a9d1213709f6b459b403ce5055
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2207
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Process CBFS ROM image by new cbfs_image API.
To verify, run "cbfstool coreboot.rom print -v" and compare with old cbfstool.
Change-Id: I3a5a9ef176596d825e6cdba28a8ad732f69f5600
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2206
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Current cbfstool implementation is relying on global variables to pass processed
data, and the calculation of address is based on x86 architecture (ex, always
assuming 0x0000 as invalid address), not easy to be used on platforms without
top-aligned memory mapping. This CL is a first step to start a new cbfstool
without global variables, and to prevent assuming memory layout in x86 mode.
The first published APIs are for reading and writing existing CBFS ROM image
files (and to find file entries in a ROM file).
Read cbfs_image.h for detail usage of each API function.
Change-Id: I28c737c8f290e51332119188248ac9e28042024c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2194
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Many functions in cbfstool need to deal with a memory buffer - both location and
size. Right now it's made by different ways: for ROM image using global variable
(romsize, master_header); and in cbfs-* using return value for size and char**
to return memory location.
This may cause bugs like assuming incorrect return types, ex:
uint32_t file_size = parse(); // which returns "-1" on error
if (file_size <= 0) { ...
And the parse error will never be caught.
We can simplify this by introducing a buffer API, to change
unsigned int do_something(char *input, size_t len, char **output, ...)
into
int do_something(struct buffer *input, struct buffer *output, ...)
The buffer API will be used by further commits.
Change-Id: Iaddaeb109f08be6be84c6728d72c6a043b0e7a9f
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2205
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The syntax of cbfstool has been changed for a while (using getopt). Updated
EXAMPLE file to show the right way to test cbfstool.
Change-Id: I5cb41b76712d8c2403fffc9fdad83c61fb2af98c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2215
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
The 'host_bigendian' variable (and functions relying on it like ntohl/htonl)
requires host detection by calling static which_endian() first -- which may be
easily forgotten by developers. It's now a public function in common.c and
doesn't need initialization anymore.
Change-Id: I13dabd1ad15d2d6657137d29138e0878040cb205
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2199
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The ELF parsing and payload building in add-flat-binary command should be
isolated just like mkpayload and mkstage.
Since the add-flat-binary command creates a payload in the end , move payload
processing to cbfs-mkpayload.c.
To test:
cbfstool coreboot.rom add-flat-binary -f u-boot.bin -n fallback/payload \
-l 0x100000 -e 0x100020
To verify, get output from "cbfstool coreboot.rom print -v":
fallback/payload 0x73ccc0 payload 124920
INFO: code (no compression, offset: 0x38, load: 0x1110000, length:..)
Change-Id: Ia7bd2e6160507c0a1e8e20bc1d08397ce9826e0d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2197
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Add -v (verbose) to every command, and allow printing debug messages.
Revise logging and debugging functions (fprintf(stderr,...), dprintf...)
and verbose message printing with following macros:
ERROR(xxx): E: xxx
WARN(xxx) W: xxx
LOG(xxx) xxx
INFO(...) INFO: xxx (only when runs with -v )
DEBUG(...) DEBUG: xxx (only when runs with more than one -v)
Example:
cbfstool coreboot.rom print -v
cbfstool coreboot.rom add -f file -n file -t raw -v -v
Normal output (especially for parsing) should use printf, not any of these
macros (see usage() and cbfs_locate(), cbfs_print_directory() for example).
Change-Id: I167617da1a6eea2b07075b0eb38e3c9d85ea75dc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2196
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
It's just good hygiene.
Change-Id: Ie7d4557c1d0dcf7fc015852c4c9b2eae29c4acfc
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2232
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Calling basename(3) may modify content. We should allocate another buffer to
prevent corrupting input buffer (full file path names).
Change-Id: Ib4827f887542596feef16e7829b00444220b9922
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2203
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently "cbfstool locate" outputs a hex number without "0x" prefix.
This makes extra step (prefix 0x, and then generate another temp file) in build
process, and may be a problem when we want to allow changing its output format
(ex, using decimal). Adding the "0x" in cbfstool itself should be better.
Change-Id: I639bb8f192a756883c9c4b2d11af6bc166c7811d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2201
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
cbfs-mk*.c does not work with real files / command line so header files with
file I/O and getopt can be removed.
Change-Id: I9d93152982fd4abdc98017c983dd240b81c965f5
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2200
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
cbfstool.c uses lots of global variables for command line options and all named
as "rom*". This may be confusing when other global variables also start with
rom, ex: int size = rom_size + romsize;
(rom_size is from command line and romsize is the size of last loaded ROM image).
If we pack all rom_* into a struct it may be more clear, ex:
do_something(param.cbfs_name, param.size, &romsize);
Change-Id: I5a298f4d67e712f90e998bcb70f2a68b8c0db6ac
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2195
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Added bits/bitfields descriptions and decoding values
into intel_core2_later.c file, which describe
MSRs for Intel processors, based on later Core 2
architecture.
Change-Id: If577c8ed944afe34f86944cc03a780fba6b3dbba
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1171
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
reference for Atom MSRs are from
Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3C: System Programming Guide, Part 3
Order Number 326019, January 2013, Table 35-4, 35-5
Has been successfully tested on the targeted cpu.
Change-Id: If94279caeab27121c63ec43c258dc962c167ad51
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2192
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
$ git stripspace < util/runfw/googlesnow.c > /tmp/bla
$ mv /tmp/bla util/runfw/googlesnow.c
Introduced with original commit.
commit b867281a07
Author: Ronald G. Minnich <rminnich@gmail.com>
Date: Wed Jan 16 11:59:34 2013 -0600
Utility to run the snow bios in user mode
Change-Id: I146c07a918ef99e8ae3c0dd72cf28fae22312e43
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2183
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This program lets you test run a snow coreboot image in user mode
on a properly equipped arm system (usually an ARM chromebook).
This is a real time saver as you don't have to flash each time.
We've found and fixed some nasty bugs with this one.
Anyway, the instructions on how to use this are in the binary.
Change-Id: Ib555ef51fd7e930905a2ee5cbfda1cc6f068278e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2159
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Show what's in a stage or payload. This will let people better understand
what's in a stage or payload.
Change-Id: If6d9a877b4aedd5cece76774e41f0daadb20c008
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2176
Tested-by: build bot (Jenkins)
The ARMv7 toolchain is now also needed for abuild (at least
if you want to be able to compile ARM images)
Change-Id: If1253203a2198f7dea632ba45540222ba3361932
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2147
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
This replaces hard-coded bootblock offsets using the new scheme.
The assembler will place the initial branch instruction after BL1,
skip 2 aligned chunks, and place the remaining bootblock code after.
It will also leave an anchor string, currently 0xdeadbeef which
cbfstool will find. Once found, cbfstool will place the master CBFS
header at the next aligned offset.
Here is how it looks:
0x0000 |--------------|
| BL1 |
0x2000 |--------------|
| branch |
0x2000 + align |--------------|
| CBFS header |
0x2000 + align * 2 |--------------|
| bootblock |
|--------------|
TODO: The option for alignment passed into cbfstool has always been
64. Can we set it to 16 instead?
Change-Id: Icbe817cbd8a37f11990aaf060aab77d2dc113cb1
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2148
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The current path doesn't make much sense (unless you're Sven)
and may also incur a very long access penalty if /home happens
to be on a network mounted filesystem.
Change-Id: I8cfceb3cf237757ce9ea8f1953bce5a72691838a
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2153
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In order to provide some insight on what code is executed during
coreboot's run time and how well our test scenarios work, this
adds code coverage support to coreboot's ram stage. This should
be easily adaptable for payloads, and maybe even romstage.
See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for
more information.
To instrument coreboot, select CONFIG_COVERAGE ("Code coverage
support") in Kconfig, and recompile coreboot. coreboot will then
store its code coverage information into CBMEM, if possible.
Then, run "cbmem -CV" as root on the target system running the
instrumented coreboot binary. This will create a whole bunch of
.gcda files that contain coverage information. Tar them up, copy
them to your build system machine, and untar them. Then you can
use your favorite coverage utility (gcov, lcov, ...) to visualize
code coverage.
For a sneak peak of what will expect you, please take a look
at http://www.coreboot.org/~stepan/coreboot-coverage/
Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2052
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Martin Roth <martin@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This tidies up the ARMV7 case when creating cbfs:
- Calculate the offset using the size of the master header and offsets
rather than using a magic constant.
- Re-order some assignments so things happen in a logical order.
Change-Id: Id9cdbc3389c8bb504fa99436c9771936cc4c1c23
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2125
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
... without the need for a coreboot table entry for each of them.
Change-Id: I2917710fb9d00c4533d81331a362bf0c40a30353
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2117
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
... and indent it to make output more comprehensible.
Change-Id: If321f3233b31be14b2723175b781e5dd60dd72b6
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2116
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
From index(3):
CONFORMING TO 4.3BSD; marked as LEGACY in POSIX.1-2001. POSIX.1-2008
removes the specifications of index() and rindex(), recommending
strchr(3) and strrchr(3) instead.
Change-Id: I3899b9ca9196dbbf2d147a38dacd7e742a3873fe
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/2112
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds an option to the cbmem utility to dump the cbmem console.
To keep the utility backwards compatible, specifying -c disables
printing of time stamps. To print both console and time stamps, run
the utility with -ct
Change-Id: Idd2dbf32c3c44f857c2f41e6c817c5ab13155d6f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2114
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
The first version of the cbmem utility was written in python,
but it had issues with 64bit systems and other little hick ups.
Since the C version has much fewer dependencies (no python needed
on target system), and it works in all corner cases, drop the
python version.
Change-Id: Ida3d6c9bb46f6d826f45538e4ceaa4fc1e771ff5
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2115
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Most hton and noth functions are already available
through the system headers we include on OS X, causing
the compiler to warn about duplicate definitions.
Change-Id: Id81852dfc028cf0c48155048c54d431436889c0e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2106
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
The kernel on Ubuntu 12.04LTS does not allow to use
fseek/fread to read the coreboot table at the end of
memory but will instead abort cbmem with a "Bad Address"
error.
Whether that is a security feature (some variation of
CONFIG_STRICT_DEVMEM) or a kernel bug is not yet clear,
however using mmap works nicely.
Change-Id: I796b4cd2096fcdcc65c1361ba990cd467f13877e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2097
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The 'VERSION' in CBFS header file is confusing and may conflict when being used
in libpayload.
Change-Id: I24cce0cd73540e38d96f222df0a65414b16f6260
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2098
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This updates $CFLAGS used for armv7. Most of them were just added
to be consistent with what u-boot does. The important ones here
are -march=armv7-a and -mthumb (to allow 16-bit Thumb instructions).
I removed the hard float support because it got errors and
coreboot should never use floats anyway. We're still having trouble
with enums but I want to see how far it gets with this patch.
Also, put the flags in a form that makes diffs easier to read. It's
almost impossible otherwise.
Finally, move some flags to the architecture Makefile, and
rely on the fact that some are set for all architectures.
Depends-On: I6f730d017391f9ec4401cdfd34931c869df10a9e
Change-Id: Ia8a1ae22959933e06f7b996d1832cea40819f1ff
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2075
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The "offs" provided on the command-line was not taken into account
when creating an image for armv7...
Change-Id: I1781bd636f60c00581f3bd1d54506f0f50bb8ad0
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2092
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The tool could print much more useful information than
just time stamps, for example the cbmem console on systems
that don't have a kernel patched to support /sys/firmware/log.
Hence, add command line option parsing to make adding such
features easier in the future.
Change-Id: Ib2b2584970f8a4e4187da803fcc5a95469f23a6a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2091
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
This fixes a minor bug that could cause testcc to fail unexpectedly.
Change-Id: Ib75d343104b6937682c05acf5232596aac83f105
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2068
Tested-by: build bot (Jenkins)
Otherwise cbfstool will segfault if you try to add an x86
payload to an ARM image.
Change-Id: Ie468005ce9325a4f17c4f206c59f48e39d9338df
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2028
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Various of the build scripts used upstream can't cope with
multilib library paths (eg. lib64), so move things to a place
where they can find them, if such paths are used.
Change-Id: I0dd9bba9a9eadd92d8704157e868fb37c715ee91
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2013
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This puts our installed binaries first in the search path, which is what we
really want.
... and remove some dead code
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I91725af6b0fc486bd943d8e25cdce8d3e2503b3c
Reviewed-on: http://review.coreboot.org/1998
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The focus of the script is to create a supported cross toolchain,
and with GOLD and LTO being released features, we don't need this
anymore.
Change-Id: Ieb7752ce6e143d93414aba5887190f853cbd5a4b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1997
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
After patching them to be more flexible, an even better approach was found:
With this change libgcc isn't built at all on mingw32 platforms, so the
system headers aren't necessary anymore.
Now x86_64-pc-mingw32 builds, too.
Change-Id: Ic1406588669d87aee1bcf40ff67af77f2a6ac283
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Raymond Danks <ray.danks@se-eng.com>
If no valid cross compiler is found, the junit file produced
by abuild is invalid, missing the closing </testcase> tag.
This breaks proper reporting in Jenkins of our ARM board at
this moment.
Change-Id: I94bfc7f334d33ceeb53451a7c5125058c1f33bd4
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1992
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
With this change, i686-pc-mingw32 is acceptable, too.
Change-Id: I924f7ece84e77dc751e5e0318bac1ebc72d39d21
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1972
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After cherry-picking change 1679 it became apparent that there was a small
typo in my last xcompile change. With this patch applied, I can now compile
the first few files in the tree before GCC dies with
In file included from src/arch/armv7/lib/romstage_console.c:23:0:
src/include/uart.h:31:6: error: redundant redeclaration of 'uart_init' [-Werror=redundant-decls]
Now for some fun...
Change-Id: Idbb07f609e4a240238964cc16714639f5ef09914
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1970
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The naming of architectures is highly inconsistent between
the different components of the toolchain. In binutils, the
file architecture is elf32-littlearch. In GCC it's armv7a-eabi.
This patch adds support for different BFD / GCC names
Change-Id: Ib644f71e8d8b4964adec73eed23921d3838e8aa7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1969
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Once again, the compiler we use on Mac OS X had trouble compiling GCC.
Switch to llvm-gcc because that one works with Xcode 4.5.2 and gcc 4.7.2.
Also drop the -W flags not known to Xcode from the iasl Makefile, and
drop the --remove-destination option from the copy, because that does not
exist on Darwin.
Change-Id: I9f978f65b5ae7edee2ecdcab337772e7a692bd9b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1967
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
!#%$@ autotools don't support all the platforms gcc and binutils
support. If you try to update to the latest autoconf, it will complain
that you have to use the older one. If I had a penny for every time
autotools broke portability...
Change-Id: I479b6c5f64f1def8dca889884e6a2b0e2ffc1fb8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1966
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
to match src/include/device
Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1960
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The output of cbfstool is a little inconsistent in some places.
This patch fixes it.
Change-Id: Ieb643cb769ebfa2a307bd286ae2c46f75ac5e1c1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1955
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is an initial re-factoring of CBFS code to enable multiple
architectures. To achieve a clean solution, an additional field
describing the architecture has to be added to the master header.
Hence we also increase the version number in the master header.
Change-Id: Icda681673221f8c27efbc46f16c2c5682b16a265
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/1944
Tested-by: build bot (Jenkins)
Other acpica's modules are not needed.
Change-Id: I16846caa922aded8db7c1d9e64c007fb2772ff98
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1935
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This provides weak empty declaration for mainboard_ops.
The struct chip_operations is not defined for __PRE_RAM__ so
the declaration is also moved upwards in the output.
Change-Id: I101f0b8b9f0a55fb51a7c6475d53cc588c84026d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1931
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After collecting dependencies for ramstage, add an intermediate step
in which object files are linked per directory. The results are then
linked into the final binary.
This reduces the maximum command line length and might also help with
future use of LTO linking.
Also adapt the lint test for build dir handling, since printall
doesn't provide individual object files for ramstage anymore.
Change-Id: Ie40febd8c1eaf4609944eedeab46d870639e53df
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
sconfig creates empty defaults for all chip_ops, which can be overridden
by drivers simply by providing a concrete implementation.
Change-Id: Ib37515f0b0747bdbf4da780d28690a1e719944b2
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1567
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
That used to be the behaviour, and it's quite useful to incrementally
fix bugs across the tree.
Change-Id: I3e30cbdcf01631bc29f892054caa3babb0969beb
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
XGCCPATH is missing in new xcompile.
Change-Id: I177f54189be445404a4a61419064d3c414b8a30c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1921
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
With this change the the xcompile script now creates environment variables
for more than one architecture.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Change-Id: I349a1fd1d865ef16979f1dfd6aeca12b1ee2eed6
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/1915
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Update acpica to release 20121114 and
update patches/ to build with this version of acpica.
Correct the creation of crossgcc-build.log
Bump CROSSGCC_VERSION.
Change-Id: I269454ebc3c78b5852e4a67e55bb5642edad191d
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1861
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This is no GNU tool, so testing for "GNU" in the version string
is bound to fail.
We now accept everything that returns success on "flex --version"
and then hope for the best.
I tested both cases
Change-Id: If325f613fde1648847b998b7e8e5782d0f22b484
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1884
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix side-effects of name translation, treat original name as const.
Change-Id: Iae26be8cefe7db11eeb8e62fce6f3b8bc9c1f4ed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/799
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
flex is needed by acpica. This patch makes the build fail early
instead of after gcc has been compiled, if flex is not there.
Change-Id: Idfd71bdf704ab25de655f1a72c266c5220b15048
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1860
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
- Adding more and more optional and non-optional parameters
bloated cbfstool and made the code hard to read with a lot
of parsing in the actual cbfs handling functions. This change
switches over to use getopt style options for everything but
command and cbfs file name.
- This allows us to simplify the coreboot Makefiles a bit
- Also, add guards to include files
- Fix some 80+ character lines
- Add more detailed error reporting
- Free memory we're allocating
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ia9137942deb8d26bbb30068e6de72466afe9b0a7
Reviewed-on: http://review.coreboot.org/1800
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This removes almost all C++ code (except the wrapper)
Change-Id: I0f84070e3b6dc57c98d49a53150a140479b3221f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1799
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The appropriate compiler (provided by the build system) is used to
ensure proper toolchain options are used.
cbmem.c is being modified to suppress pointer to integer typecast
warnings.
Change-Id: Ibab2faacbd7bdfcf617ce9ea4296ebe7d7b64562
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1791
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Coreboot and u-boot create a table of timestamps which allows to see
the boot process performance. The util/cbmem/cbmem.py script allows to
access the table after ChromeOS boots up and display its contents on
the console. The problem is that shipping images do not include Python
interpreter, so there is no way to access the table on a production
machine.
This change introduces a utility which is a Linux app displaying the
timestamp table. Conceivably the output of this utility might be
included in one of the ChromeOS :/system sections, so it was attempted
to write this procedure 'fail safe', namely reporting errors and not
continuing processing if something goes wrong.
Including of coreboot/src .h files will allow to keep the firmware
timestamp implementation and this utility in sync in the future.
Test:
. build the utility (run 'make' while in chroot in util/cbmem)
. copy `cbmem' and 'cbmem.py' to the target
. run both utilities (limiting cbmem.py output to 25 lines or so)
. observe that the generated tables are identical (modulo rounding
up of int division, resulting in 1 ns discrepancies in some
cases)
localhost var # ./cbmem
18 entries total:
1:62,080
2:64,569 (2,489)
3:82,520 (17,951)
4:82,695 (174)
8:84,384 (1,688)
9:131,731 (47,347)
10:131,821 (89)
30:131,849 (27)
40:132,618 (769)
50:134,594 (1,975)
60:134,729 (134)
70:363,440 (228,710)
75:363,453 (13)
80:368,165 (4,711)
90:370,018 (1,852)
99:488,217 (118,199)
1000:491,324 (3,107)
1100:760,475 (269,150)
localhost var # ./cbmem.py | head -25
time base 4249800, total entries 18
1:62,080
2:64,569 (2,489)
3:82,520 (17,951)
4:82,695 (174)
8:84,384 (1,688)
9:131,731 (47,347)
10:131,821 (89)
30:131,849 (27)
40:132,618 (769)
50:134,594 (1,975)
60:134,729 (134)
70:363,440 (228,710)
75:363,453 (13)
80:368,165 (4,711)
90:370,018 (1,852)
99:488,217 (118,199)
1000:491,324 (3,107)
1100:760,475 (269,150)
Change-Id: I013e594d4afe323106d88e7938dd40b17760621c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Example:
cbfstool image-link.bin add-flat-binary u-boot.bin fallback/payload \
0x100000 0x100020
will add u-boot.bin as fallback/payload with a load address of 0x100000
and an entry-point of 0x10002.
Change-Id: I6cd04a65eee9f66162f822e168b0e96dbf75a2a7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
ifdtool will now dump access permissions of system comonents to
certain IFD sections:
Found Master Section
FLMSTR1: 0xffff0000 (Host CPU/BIOS)
Platform Data Region Write Access: enabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: enabled
Platform Data Region Read Access: enabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR2: 0x0c0d0000 (Intel ME)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR3: 0x08080118 (GbE)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: disabled
Requester ID: 0x0118
Also, ifdtool -u /path/to/image will unlock the host's
access to the firmware descriptor and ME region.
ifdtool -l /path/to/image will lock down the host's
access to the firmware descriptor and ME region.
Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1755
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
If a section is bigger than the FD file it is injected into, and the FD
lies about the size of the FD file, ifdtool would crash because reading
in the section writes beyound the FD file in memory.
Change-Id: Idcfac2b1e2b5907fad34799e44a8abfd89190fcc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1754
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Detailed timing descriptor (DTD) is an 18 byte array describing video
mode (screen resolution, display properties, etc.) in Intel Option
ROM. Option ROM can support multiple video modes, specific mode is
picked by the BIOS through the appropriate Option ROM callback
function.
The new utility allows to interpret the 18 byte hex DTD dump, and/or
modify certain values, and generate a new DTD.
To parse the DTD contents just pass the 18 bytes to the utility in the
command line. To modify the existing contents and generate a new dump
precede the 18 bytes with '-m' and follow prompts.
Change-Id: Ib00bdaf42c350b98b5a48d08e6bb347b5ec25a8b
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1711
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is a cosmetic change which formats timestamp information
retrieved by cbmem.py.
Instead of printing timestamps in a single line, print them one per
line and add time (in us) elapsed since the previous timestamp.
time base 4149594, total entries 18
1:56,928
2:58,851 (1,923)
3:175,230 (116,378)
4:175,340 (109)
8:177,199 (1,859)
9:214,368 (37,168)
10:214,450 (81)
30:214,462 (11)
40:215,205 (743)
50:217,180 (1,974)
60:217,312 (132)
70:436,984 (219,671)
75:436,993 (8)
80:441,424 (4,431)
90:442,487 (1,062)
99:553,777 (111,289)
1000:556,513 (2,736)
1100:824,621 (268,107)
Change-Id: I0d25cafe766c10377017697e6b206276e1a92992
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1716
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
For some reason which I fail to understand, specifying endiannes using
'@' (which means 'native' and should be the same as '<' on x86
platforms) causes cbmem.py to crash the machine on 64 bit systems.
What happens is that the addresses read from various table headers'
struct representations do not make sense, when bogus address gets
passed to get_phys_mem, the crash happens while that function is
executed.
dlaurie@ found out that replacing "@" with "<" in fact fixes the
issue. After some investigation I am just submitting this fix without
much understanding of the root cause.
Change-Id: Iaba9bc72a3f6b1d0407a5f1e3b459ccf5063969d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1715
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
CBFS allows coreboot rom images that are only partially covered
by the filesystem itself. The intention of this feature was to
allow EC / ME / IMC firmware to be inserted easily at the beginning
of the image. However, this was never implemented in cbfstool.
This patch implements an additional parameter for cbfstool.
If you call cbfstool like this:
cbfstool coreboot.rom create 8192K bootblock.bin 64 0x700000
it will now create an 8M image with CBFS covering the last 1M of
that image.
Test:
cbfstool coreboot.rom create 8192K bootblock.bin 64 0x700000
creates an 8M image that is 7M of 0xff and 1M of CBFS.
Change-Id: I5c016b4bf32433f160b43f4df2dd768276f4c70b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1708
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
cbfstool was not looking at any dependencies when building
by running make in util/cbfstool. By fixing this it's not
required to make clean every time you edit a file in there.
Change-Id: I544fd54d4b9dd3b277996c21ade56dc086b84800
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1707
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
Compose the name from Kconfig strings instead.
As the field is for debug print use only, a minor change in the output
should do no harm. The strings no longer include word "Mainboard".
Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1635
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't let expat and/or python show the compile process on stdout.
Instead direct this output to crossgcc-build.log.
Fix the logfile path for python.
Change-Id: I431dabf6955d7eef3e54c96d0fb11b92d1cee96d
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1667
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I7cd63248eb8abb711cecce41e3f8a282b34aa126
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1548
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Update crossgcc to use gcc 4.7.2.
This requires a minor change to util/crossgcc/buildgcc as well.
Tested on hardware with asus/p2b and lenovo/x60.
Change-Id: Ia3921844670ca99741e5715def14dd969f305ab7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1609
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Compilation of acpica-20120420 is broken (and old, but I'll take care
of that in a future patch),
let's fix that ("Building IASL 20120420 ... failed").
Change-Id: If5fd5cd93d748f78b7c059323f9f810666e32cc7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1607
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
regex, pdcurses, wsock(for itohl) are seperated libraries. mmap and unmmap are
ported from git.
Issues:
1. The length of command line is limited. That makes the Thather can not be built
because too many obj.o need to be built.
Change-Id: I1d60ec5c7720c1e712e246c4cd12e4b718fed05f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The default gcc on mingw will process the __attribute__ ((packed)) in
a different way other than non-win system.
Change-Id: Iac9f4476c922472d0b447f1c3ef60e8e13bd902f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1603
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Use the verbatim variable method to define and export test code and
the actual libpci test from flashrom. This improves readability and
will work with stricter compiler (settings).
Change-Id: Iace7d53b0b992c4fde596ce1d606ad715d6dfc2a
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1575
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Separate host bridges/DRAM controllers from LPC controllers in supported_chips_list[].
- Refine some names and macros.
- Clean up some whitespace errors.
- Add IDs and names of 5, 6 and 7 Series southbridges and the three
latest Core CPU families with integrated memory controllers but do
not implement any pretty printing routines for them yet.
The first generation Core family is already supported, although it
was wrongly named after the PCH and used the wrong ID. Also, the BAR
values have been mangled to 32b instead of 64b. Both errors have been
fixed and most basic support for the other two generations was added.
Change-Id: Ief81e57f7c065cafac52e48b6364b57c72fcdf95
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1574
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
&> is a bashism to redirect both outward streams (stdout and stderr), but
with other shells this introduces a race condition with the rm command
after it, because the compiler execution is done in the background/
in parallel. Found and tested with dash.
Change-Id: I08516494828c9f7af168f954f2df027372657867
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1573
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
For BSD, patch and tar are not default GNU. Add a work around
to let the non-gun patch and tar work.
Change-Id: I0a9d0bb0e535aa5e0dde146db330c3c8d7b4d8cb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1502
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Forcing this rule, chip_ops can be added in the static devicetree
regardless of the existence of the chip.h files.
Change-Id: Iec1c23484e85cab3f80a34f2b082088f38ac4de9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1472
Tested-by: build bot (Jenkins)
The classes in $(top)/Makefile uses $(abspath) to get the path.
The $(abspath) can not resolve symlink. If the coreboot is located
in a symlink directory, the run_printall produces the absolute
path while the $PWD just produces the path with symlink. Use
`pwd -P` to get the abs path.
Change-Id: Icf6b364d030c14a9c78991767b17dafc701baf3c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1551
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After make 3.81 is copied to /usr/local/bin, the old make 3.80, which
doesn't work for coreboot, will replace $MAKE with gnumake. That is not
we want.
Change-Id: I87fbe95c70228a22f2c233ff071df29639b63726
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Makefile still used SVNDEF on FreeBSD.
Change-Id: I45c7fbc66c33e82a2146ef7df87b63bc7edea4cd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1554
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
see the Netbsd manual:
http://netbsd.gw.com/cgi-bin/man-cgi?uname++NetBSD-current
Error output needs to be redirected.
Change-Id: I1853a0162e14be0ee9d7971466499af6c72b2427
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The Makefile.inc is integraged into coreboot Makefile. It doesn't
need to access to HW like cmos. It doesn't include cmos-hw-unix.c,
which is only for individual tools running seperatedly.
Change-Id: Ib00b5c3da63acb4120cb23eb7d661c5bc75d7c86
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1544
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: I86cecf6aee1fcb682cb32bd0f03e014fd1afe594
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1549
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
With this chance it becomes practical to have payload.sh build/update
the payload, and abort abuild if something bad happened.
Change-Id: Iee25de2e8b62153c477b8e5d32e097b59797523c
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1536
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Only relevant on windows (and nvramtool currently fails there), but
it doesn't hurt.
Change-Id: I5d6420c1f9dc49cf3af31e75088e51a90f729e01
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1535
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Change-Id: I6a7852eef32a3440c9d29e45420cb21d2db8c404
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1528
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Sometimes we like to make grep auto-highlight the match text by
setting the GREP_OPTIONS. This will make the compare_output
in lint-002 catch the difference between 2 strings which text are
same but color are different. Override the GREP_OPTIONS.
Change-Id: Ia257214fe5149e084e8eac3fb551a494eaa46ae6
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This reverts commit 645f2dd5d9.
Instead of adding a special case to nvramtool to avoid it
picking up Kconfig's regex.h, have the host compiler only
consider util/kconfig for includes (ie. -Iutil/kconfig)
for kconfig related object files.
Change-Id: Ie4f97ce38cb3e911f6e6c1e5b6f86f6998d93f69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1509
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
The ramstage location has been changed. Reflect this in the script.
Change-Id: I76c9b38a8ffe2188e94146e845d23536625c0979
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/1504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Set HOSTCFLAGS as nil to make the nvramtool include the regex.h
in system. Otherwise it will include the regex.h in kconfig, which
will cause building error in FreeBSD.
Change-Id: I95292e23e1716da1260842be9597119a4e26c8ed
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1500
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
Some older gcc requires the default entry in switch, otherwise
build warning "enumeration value not handled in switch" will come
up.
Change-Id: Ic8ea9960e4aca599e0ea62ec345122c9df57e766
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1501
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf
The code was done by Juha Tuomala <Juha.Tuomala@iki.fi> but he refused
to sign it off, or commit it for review. I'll commit it anyway with my sign-off
because it does not exceed threshold of originality for any copyright.
Change-Id: Id86267f5add539b99229f20bbe339bfb5eb20f8b
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1496
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
libgen.h dont have to be included.
Change-Id: I46a6a23a310b20784de956a577f1ab3c7931e34d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1470
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The name is derived directly from the device path.
Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Dropping mainboard's chip.h broke execution of the mainboard's enable
function and the addition of mainboard specific smbios tables.
The former was fixed by Kyosti in http://review.coreboot.org/1374
This patch fixes the breakage in static.c and also backs out a small
portion of Kyosti's patch (because it's not needed anymore)
Change-Id: I6fdea9cbb8c6041663bd36f68f1cae4b435c1f9b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1421
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
We thought about two ways to do this change. The way we decided to try
was to
1. drop all ops from devices in romstage
2. constify all devices in romstage (make them read-only) so we can
compile static.c into romstage
3. the device tree "devices" can be used to read configuration from
the device tree (and nothing else, really)
4. the device tree devices are accessed through struct device * in
romstage only. device_t stays the typedef to int in romstage
5. Use the same static.c file in ramstage and romstage
We declare structs as follows:
ROMSTAGE_CONST struct bus dev_root_links[];
ROMSTAGE_CONST is const in romstage and empty in ramstage; This
forces all of the device tree into the text area.
So a struct looks like this:
static ROMSTAGE_CONST struct device _dev21 = {
#ifndef __PRE_RAM__
.ops = 0,
#endif
.bus = &_dev7_links[0],
.path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}},
.enabled = 0,
.on_mainboard = 1,
.subsystem_vendor = 0x1ae0,
.subsystem_device = 0xc000,
.link_list = NULL,
.sibling = &_dev22,
#ifndef __PRE_RAM__
.chip_ops = &southbridge_intel_bd82x6x_ops,
#endif
.chip_info = &southbridge_intel_bd82x6x_info_10,
.next=&_dev22
};
Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727
Signed-off-by: Ronald G. Minnich <rminnich@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1398
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
mainboard_config never worked right, at least not since we've had sconfig.
Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that
tried to use it anyways.
Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1359
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The "Error while writing." error messages did not output a new line
which made the output look weird. With this patch, it should look like
this:
$ ifdtool -x 3rdparty/mainboard/google/parrot/descriptor.bin
File 3rdparty/mainboard/google/parrot/descriptor.bin is 4096 bytes
Found Flash Descriptor signature at 0x00000010
Flash Region 0 (Flash Descriptor): 00000000 - 00000fff
Flash Region 1 (BIOS): 00200000 - 007fffff
Error while writing: Bad address
Flash Region 2 (Intel ME): 00001000 - 001fffff
Error while writing: Bad address
Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)
Change-Id: I784ff72d0673f167dbf0bd10921406abd685ce72
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1299
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Almost all probe functions called cpuid(). Those calls are replaced
by a single cpuid() call in main() and a new parameter to the target
probe functions with the cpuid() result.
The vendor_t and struct cpuid_t definitions are moved closer to the
top of msrtool.h and the vendor_t enum is reformatted to simplify
addition of further values.
Change-Id: Icd615636207499cfa46b8b99bf819ef8ca2d97c0
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/1259
Tested-by: build bot (Jenkins)
Added few MCH and DMI registers for H65E.
Description of them can be found at
"2nd Generation Intel Core Processors
Family datasheet"
Change-Id: If4fee35bb5a09b04ea0684be9cbd3c1e9084b934
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1258
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
eliminate printf format warning.
Change-Id: I51f75a259d28c5de788f57c3d720b76ca638e330
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1248
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Use the right data types to fix compiler warnings.
Change-Id: Id23739421ba9e4a35599355fac9a17300ae4bda9
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/1236
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
To complement commit e1bb49e (Add a "remove" command to cbfstool) and
fix a compiler warning provide a prototype for remove_file_from_cbfs.
Change-Id: Ied8eac956de5fed3f9d82ce1e911ee1fec52db15
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/1235
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Accessing the memory of a char array through a uint32_t pointer breaks
strict-aliasing rules as it dereferences memory with lower alignment
requirements than the type of the pointer requires. It's no problem on
x86 as the architecture is able to handle unaligned memory access but
other architectures are not.
Fix this by doing the test the other way around -- accessing the first
byte of a uint32_t variable though a uint8_t pointer.
Change-Id: Id340b406597014232741c98a4fd0b7c159f164c2
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/1234
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The lex compile wasn't current (or something) and so INTA wasn't lexed
properly.
Change-Id: I5a760430788792f54c4e1e0d419b8dd525079d15
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1226
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This register is helpful for porting new mainboards based on
cs5536 southbridge.
Change-Id: Iff3adc2c2fbc672c8541096756f95b3322f6ab19
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/1211
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch adds support for autogenerating the MPTABLE from
devicetree.cb. This is done by a write_smp_table() declared
weak in mpspec.c. If the mainboard doesn't provide it's own
function, this generic implementation is called.
Syntax in devicetree.cb:
ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN>
The ioapic_irq directive can be used in pci and pci_domain
devices. If there's no directive, the autogen code traverses
the tree back to the pci_domain and stops at the first device
which such a directive, and use that information to generate the
entry according to PCI IRQ routing rules.
Change-Id: I4df5b198e8430f939d477c14c798414e398a2027
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1138
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Add support to dump all data registers for Nuvoton chips (NCT6775F, NCT6776F,
and NCT6779D). Register contents will be dumped if the -e option is provided on
the command line.
Change-Id: I2b425b48c1f28a10ff3c1ca1d7f21c501eff74ad
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1150
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Add new function dump_data() to dump a bank of superio data registers.
Change-Id: I13a58d87c14d319cfcdea1ec1d54c2b110d90f9f
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1149
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Remove superfluous pkg* definitions and installation of a target
directory directory that is never used.
Change-Id: I2addf3f316230cdd428def5889fd3beb7c40f422
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/1195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The superiotool Makefile extracts a version string from SVN. This does not work
with a git repository, and results in an empty version string. Use the output of
'git describe' as version string instead.
Change-Id: Idf92c02753b28ef5bcdd3b6df4a08d79ae974434
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1151
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
commit 57cd1dd296 added this attribute,
but with wrong length, so it actually never matched.
Change-Id: Ibcc7816b5fa895faa66710cc29de38f129be6a2b
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1133
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Mathias Krause <minipli@googlemail.com>
This makes it easier to use the same code on romcc and gcc.
Specifying attribute((unused)) on romcc does nothing.
Change-Id: If9a6900cad12900e499c4b8c91586511eb801987
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1132
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
and increase the busses size to 32, as 16 isn't enough one some
systems (i5000 for example)
Change-Id: Ie09f451dd82ac25b0de85fd47807136e01da737b
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1114
Tested-by: build bot (Jenkins)
make it more readable by adding INT defines and a left shift.
Change-Id: I7db4d8c71ab4d705833019aa4cc2f11cef7d4fee
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1113
Tested-by: build bot (Jenkins)
Print IOAPIC entry based on actual data, instead of giving the user
the feeling that the generated ioapic entry has any relation to reality.
If the IOAPIC entry in the MPTABLE is incorrect, the user will notice
it anyways. But adding a static entry (which might be also incorrect)
is even worse.
Change-Id: I6d0012324a9e6c7d22436ada36cbd3a4f7166f5c
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1108
Tested-by: build bot (Jenkins)
It was renamed in coreboot, so have mptable generate correct code.
Change-Id: I9579209f9f47b756d8ccab63b6f942d22d53d79d
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1107
Tested-by: build bot (Jenkins)
* -c "" need never be tested if getopt params are handled; fail abuild script when getopt parsing fails
* use expr to resolve numeric test fails with -c max
* cpus variable may be being passed in the environment. Don't overwrite MAKEFLAGS if it is not.
Change-Id: I96236ef719a1a9f942b8e15bfcf015d60068e58a
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/1068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
clang complained about a missing include and wrong fprintf use.
Change-Id: Idc023b653e694147c624d5f8f9ed3b797c462e9f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1067
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In printf/printk, using %lld or %ld for uint64_t will warn on either
64bit or 32bit machines. However, C99 defines PRIx64 / PRId64 to
provide the right modifiers for printing uint64_t variables. Use them
instead.
Change-Id: I68df5d069a1e99d1a75885173ddfd7815197afea
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1053
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
To avoid having two copies for every firmware descriptor (one for
EM100 use and one for real SPI flash use), add an EM100 mode to
ifdtool that allows to "dumb down" a fast image to the settings
required for the EM100 to work.
Change-Id: I0ed989f0a49316bc63d8627cb5d4bd988ae7a103
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1039
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The ChromeOS build system provides a set of CXXFLAGS, however those do
not contain -DCOMPACT. This breaks the compilation of cbfstool in
coreboot-utils.
This fix overrides CXXFLAGS so that coreboot-utils compiles again.
Change-Id: If9495bdd815fe2cdaeba5386afa953558742467b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1038
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It still failed because make touches files it isn't
supposed to touch.
Change-Id: I5a6ceaa9d5da212c1e34b121cf39fa9d27964747
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1037
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Happened way too often that crossgcc failed
because m4 or bison wasn't installed already.
Change-Id: Ibcca2183edd5db20608015e3898f8fff9a6d11e8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1026
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Update GNU project versions, download GNU project tarballs
using ftpmirror.gnu.org (http, picking close servers).
Update ACPICA tarballs, ignore https certificates for all
downloads. Not very useful, but breaks ACPICA download.
Change-Id: I4aa8b08836346d031793a006b20b741d86e48988
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1025
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Raymond Danks <ray.danks@se-eng.com>
Handling user options was spread out across the code.
Collect as much as possible in the getopt loop.
Change-Id: I4979a14988da000c008e155023b960535b529b41
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1028
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
abuild used to allow boards to override certain environment
variables using a file called abuild.info.
This isn't used, this isn't needed. Drop it.
Change-Id: Ic93748f602bf0c354ff1f3be25a050e1cb469256
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1027
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Determine if xargs -P works. If yes, use that to build multiple
boards in parallel, instead of relying on make -j X, when doing
a full abuild run (instead of single boards).
make -j X isn't able to make use of several cores at various
serialization points in our build process, so this change results
in a >25% speed up for a full abuild run in my tests.
Change-Id: Id484a4211c84a3a24115278e0fbe92345f346596
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/409
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is the beginning of a tool that transforms the i9x5 code to user
mode code. Consider this a very early stage although it does produce
two programs. Requires spatch 1.0 or greater.
To try it out, assuming you have an up-to-date spatch,
sh transform
make
make broken
Please don't fall to the temptation to auto-magicize this process.
It's primitive for a reason. That said, suggestions welcome of course.
Change-Id: I0188e36637b198b06c17f6d3c714d990e88bd57d
Signed-off-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/1003
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When bringing in nvramtool as build_opt_tbl replacement,
various platforms where left in the cold that don't
provide direct IO support from userland (or at least not
in a way we support).
Build nvramtool without CMOS support when done as part of
a coreboot build. We don't need to touch CMOS in this case.
Change-Id: Icc88d1d32f10384867a5d44b065f9aa119bb0d50
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/983
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The stable lint test "build-dir-handling" ran the build system
in a way that made it download the blobs repository. Since this
is part of the pre-commit hook, this might have kicked in with
users desiring not to have them.
Change-Id: I44a00137352c5966ff7fe2a030673276f6803908
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/999
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
abuild -B enables the use of the blob repository.
Change-Id: I2dd823d3b024ad249d72d668657bf6a6e92145cf
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/958
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
To build under Cygwin, nvramtool depends upon the package ioperm:
http://openwince.sourceforge.net/ioperm/
for sys/io.h and sys/perm.h. This change causes the nvramtool make to correctly include and link against these headers and libraries.
Change-Id: If6cd9d324de7bc19830e0018844f42761b28ddd3
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/940
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To build under Cygwin, ectool depends upon the package ioperm:
http://openwince.sourceforge.net/ioperm/
for sys/io.h and sys/perm.h. This change causes the ectool make to correctly include and link against these headers and libraries.
Change-Id: I7d54ab5110c2bb1fd21dfa48d56031f3f29cd54e
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/941
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It's gone from the build. Drop the code as well.
Change-Id: Ice6fcb39565273360a576bda4826f16088f4666c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/914
Tested-by: build bot (Jenkins)
Reviewed-by: Vikram Narayanan <vikram186@gmail.com>
As cmos.layout parsing capabilities are already there in nvramtool,
use those than using build_opt_tbl.c. Add binary and header file
generation in nvramtool. Make appropriate changes to Makefile.inc.
Change-Id: Iaf3f5d4f51451aeb33c92800a0c895045f2388cf
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/898
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Don't test executable files nor object files, even if the former might
render the test useless on win32 (executable bit isn't well defined there).
Change-Id: Ifb6fc83243289d266f439316c14b6b009f8da5fc
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While at it, also make the array static - no need to export this symbol.
Change-Id: I7fdcda2b80150b6f32b5bc3e0957998a4fd43fce
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/892
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Fixed "warning: format not a string literal and no format arguments"
Change-Id: If752a37f268c90f782c6e831e5477ea804e48026
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/878
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On windows, we sometimes require getopt executables, which end up
in the source tree. These shouldn't break the whitespace test.
Change-Id: Iaf86e38b94605bebb69a317e00f932eefcf468b9
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/863
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Similar to buildgcc, abuild requires getopt(1). Provide an
implementation for platforms without it (Win32)
Change-Id: I2ae4d84e06dd34135c97b18819da2b49a89706ce
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/862
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This way we can depend on it during build.
Change-Id: I7e773c6a029e376e3d70d0a8c9e96ffe0c2cf82e
Signed-off-by: Patrick Georgi <Patrick.Georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/845
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change partially addresses the problem with attempting to
generate coreboot image out of tree. The configuration step fails when
in cheroot, if the destination directory is placed in /tmp.
The problem is that the mconf package tries renaming the temporary
file created in the local directory into the destination config file.
If the destination root and the local directory are located on
different file systems, the rename operation fails.
The proper fix (still upcoming) would be to identify all places where
mconf creates temp files, and make sure that all temp files get
created in the destination tree.
This change modifies just one location, which prevents building out of
tree in the most common case.
Test:
run the following in the coreboot directory in chroot:
(coreboot) cp config.lumpy .config
(coreboot) /bin/rm -rf /tmp/cb
(coreboot) CROSS_COMPILE=i686-pc-linux-gnu- make obj=/tmp/cb oldconfig
(coreboot) CROSS_COMPILE=i686-pc-linux-gnu- make obj=/tmp/cb
Observe the build succeed (it was failing during the config phase
before this change)
Change-Id: If4506e984b8afc192a1689c7b0aa956dd35f66c6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This command removes the first file it finds with the given name by changing
its type to CBFS_COMPONENT_NULL and setting the first character of its name to
a null terminator. If the "files" immediately before or after the target file
are already marked as empty, they're all merged together into one large file.
Change-Id: Idc6b2a4c355c3f039c2ccae81866e3ed6035539b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/814
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds detection of x86_64 gcc toolchain (which buildgcc can build
if provided the option).
Change-Id: I8b12f3e705157741279c7347f4847fb50ccc2b0e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/673
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: build bot (Jenkins)
... and remove some dead code.
Change-Id: Id959bdf57af09db2a1f5742555c2dcabca38ac9a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/818
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
- Fix some poor programming practice (breaks of strict aliasing as well
as not checking the return value of read)
- Use PRIx64 instead of %llx to prevent compilation warnings with both
32bit and 64bit compilers
- Use same compiler command options when linking inteltool and when
detecting libpci for inteltool
Change-Id: I08b2e8d1bbc908f6b1f26d25cb3a4b03d818e124
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/752
Tested-by: build bot (Jenkins)
Reviewed-by: Mathias Krause <minipli@googlemail.com>
idftool was failing to add the ME blobs into the output image in case
the blob size does not exactly match the size allocated for it in the
flashrom structure.
It is difficult to set the field in the structure to exactly match the
size (for some reason Intel flash tool fails to insert the correct
size even when given the exact ME blob). On the other hand there is no
harm in using am ME blob smaller than the allocated size, this change
modifies the tool building the image to allow for smaller components.
Change-Id: I1b04f90051b91157391943c9bad0eb06dd297431
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/751
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change makes significant changes to cbmem.py to make it use the
coreboot tables to find the memory console and timestamp areas instead
of looking for the in memory table TOC structure. That appears to be
more robust and gets cbmem.py working again after some unrelated
changes that affected memory layout.
It also introduces some small infrastructure to make accessing C style
structures in physical memory easier and more transparent.
Change-Id: I51833055a50c2d76423520ba6e059bf8fc50adea
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/762
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is a python script which is supposed to run on a target
which is controlled by coreboot. The script examines top of
memory looking for the CBMEM signature at addresses aligned at
128K boundary. Once the script finds the CBMEM, it iterates
through the CBMEM table of contents and parses two entries: the
timestamps and the console log.
This submission is just a template to build upon to create a
utility for displaying CBMEM information while running Linux on
the target.
BUG=chrome-os-partner:4200
TEST=manual
See test description of d81e6b8c8d41f2d6 for test procedure.
Change-Id: Id863a8598eaadc2d20d728f9186843e65cbe6f37
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://gerrit-int.chromium.org/5942
Tested-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/723
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There was some corner case where commit-msg failed. Update to
latest upstream version.
Change-Id: I822d6c3f64728de7356401465e00575ac5af8196
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/798
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
no dumping yet
Change-Id: I4e687ca816c8d6d1c95255b0abf6a19513e23f86
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/734
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
- wc adds a number of leading spaces which broke cut
- sed can't replace spaces with new lines, so use tr for that.
- make sure directories are created if they're not there.
Change-Id: Ia0db059683abe3d97b0ab6feaece660a1f4e5079
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/774
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Also mark the corresponding lint test stable.
Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some attempt at enforcing style
Change-Id: Ibbfb86402ecc57e8db6c3857c8e0193085ed4fc2
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/771
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In bios_log, find that the first segment of the payload is shown
as code rather than data.
Sample:
Got a payload
Loading segment from rom address 0xfff29378
code (compression=1)
...
Change-Id: I82eaad23f08c02f4ed75744affa8835255cf5c17
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/767
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The offending part that made coreboot crash with some toolchains
was that gcc emits SSE instructions but coreboot did not enable SSE at
that point.
Since the gain for coreboot using SSE instructions is not measurable,
let's not use SSE instructions rather than enabling SSE early on.
One rationale behind this is that other parts of coreboot, like the
SMM handler would need fixing because the XMM registers are not saved
on SMM entry. Thus keep it simple.
Change-Id: I14f0942f300085767ece44cec570fb15c761e88d
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/694
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When configuring the tree with "make gitconfig", a pre-commit hook
is installed that runs the stable lint tests.
If any of these fail, the log is visible (on stdout) and the
commit is aborted.
Change-Id: Ie2a26e87f466c63b24db8dca8827057a18ac7f3e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have tests that pass (and should be enforced soonish) and those
that don't pass yet (and thus shouldn't break the build).
The plan is simple: As soon as a test passes, it's marked stable so
things remain that way.
"make lint" runs all tests,
"make lint-stable" runs only those that shouldn't fail.
Change-Id: Iaa85d71141606d9756e29b37c7a34c2a15e573ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/681
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
config files are rename()d, which fails across filesystem borders.
So force temporary config files in current directory.
Change-Id: I583c2ab9a822a6f99f838778aa17ffd2d47eaed1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We used to support marking boards broken. We don't need that anymore.
Change-Id: I9d21fdf22c9a8e0e69488fc7896f2a81bf629201
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/675
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix issues reported by new lint test.
Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/646
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
So far it tests for trailing whitespace.
"Upstream" files (bison/flex's .?_shipped, kconfig, vendorcode) are ignored.
Change-Id: I7af1954d537fd05f06cd210ac130dac87892159b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/645
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When the romstage.bin becomes bigger than the size of XIP, the
cbfstool can not allocate the romstage in the CBFS. But it doesn't
report an error. It will take quite a while to find out the root
cause.
Change-Id: I5be2a46a8b57934f14c5a0d4596f3bec4251e0aa
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/650
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
don't remove calls to `flatten()' and `correct_coalesce_conflicts()',
since they (probably) have side effects.
Change-Id: I78fc4163b3f5f1f5f3c5153f9559c22e11e8344d
Signed-off-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-on: http://review.coreboot.org/605
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To simplify installation on mingw a bit (even though git remains a pain),
drop the perl dependency the commit-msg hook introduced to the coreboot
development environment.
It's replaced by awk which we use elsewhere already (and is a more lightweight
utility in any case)
Change-Id: I67adfe1ec43c898735d4bae4819ceb53e83c303b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/78
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Mainboard and chip Kconfig files have several build options that
are redundant with information in devicetree.cb. This patch enables
sconfig to auto-generate equivalent configuration.
sconfig -s
Generates mainboard's static.c file, as before.
sconfig -b
This operation creates mainboard's bootblock init code. By default,
for every chip listed in mainboard/devicetree.cb, if there is a
chip/bootblock.c file, the init function is called.
A mainboard/bootblock.c file can be added to override default
behaviour.
sconfig -k
This operation generates select -options for component paths.
Change-Id: I808d44af552dbc5e0565d6a0f4f72c7be9f5740e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Linking fails when using -Wl,--as-needed and/or esp. when forcing --as-needed
through a compiler specs file.
A proper compile/link command would look like: $(CC) $(CFLAGS) $(LDFLAGS) -o foo
$(OBJS) $(LIBS). So the *FLAGS must be passed *before* the objects while the
libraries/dependencies must be passed *after* the objects.
For more details see: http://www.gentoo.org/proj/en/qa/asneeded.xml
Change-Id: I5a5b05e1cab8a2d88ce56c92d9b2f991ca1ee6c0
Signed-off-by: Christian Ruppert <idl0r@qasl.de>
Reviewed-on: http://review.coreboot.org/494
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Collecting per-board abuild.xml is bound to fail if there
are no such files.
Change-Id: I6bd6b4389beda51654005e0380f0e52f006642db
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/422
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This should fix issues with the iasl Makefile on Debian and
prepares ccache support for buildgcc.
Change-Id: Id9e6b2044b159b19bf013ec5c47b60ca1c2f2991
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
kconfig creates reasonably safe filenames for its temporary files
except for two of them.
Change-Id: I6861f55ae2a5311e3fb7919333ce9af1e39ce78b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Write them per-board and merge them after everything is done.
This prepares for build parallelization.
Change-Id: Ia4e7ce03473bcf8861fb9ae06e9c1270292401ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/407
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use MAKEFLAGS to propagate the parallelization configuration to
the build
Change-Id: If90ed446edd8e6dc679d284ee9db7a24269edd36
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/406
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
By moving the just-created file away, parallel runs of abuild might break.
Change-Id: I03368f00e9b11dad4c80d41279970e28debc7ed5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/405
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc moved from building gdb by default (with opt-out) to
gdb being optional. Adapt Makefile so it works again
Change-Id: I663a8c70db4f7b5d07456fb67a223dbb2de2c133
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/417
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current code exits config mode of the NCT6776F immediately after
detection, so the register dump shows all 0xffs. This patch adds code to
re-enter config mode for the register dump so that the register contents
can be read.
Change-Id: I4ad0c108b6411a665e31f55dea4b91ca77d1a5f7
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In addition:
- drop some unneeded patches
- make the scripting support depend on SKIPPYTHON not SKIPGDB
so it is possible to build GDB with and without scripting support
- rename the repository checkout version of GCC trunk, not X+1
so we don't have to change it on every version upgrade.
Change-Id: I1b7d5b8921187c1c1d39b04f20bb715ddba72fe8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/367
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This allows GDB to run Python scripts. The Python build is dependant on the GDB
build flag.
Changes by Stefan Reinauer:
- update to latest buildgcc script
- disable GDB per default
- disable python scripting, if GDB is not enabled
- bump version number to 1.06
Change-Id: Ie7fc8706deec41c804870415d3c79d225c98cd31
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/153
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The previous fix broke buildgcc colors on MacOS X.
This uses an encoding that should be more universal.
Change-Id: I31ac6090ffb7c04784cf6566823652f229aebbb5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/361
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Ubuntu (and probably other distros) have dash as /bin/sh, which
doesn't display colors by itself. If /usr/bin/printf is found, it's
used instead of the internal printf to re-enable colors.
Change-Id: I3e6d413cd0c8a46ef91821d8c07e88166de58af4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/352
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Tested on Mac OS X 10.7.1
- Tested on Ubuntu 10.04 LTS (Lucid Lynx)
- Tested on Ubuntu 11.10 (Oneiric Ocelot)
Please test on Windows and other Linux distributions
Change-Id: I132c01293fc0cff0cfb84556a93c0b8de8e57230
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/250
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
This patch adds support to dump SIO like interface of AMD Embedded Controller
in the SB7xx and SB8xxx southbridges. Parts of the register interface are
documented in SBxxx RRG BDG.
Change-Id: Ib2ccaa3dfe33cfa8e7cba19d8ab0798286ad2f92
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/343
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
If -Werror is not specified, tests for certain compiler flags
will emit a warning, which makes the build break since we compile
with -Werror.
Change-Id: I7be56530ff9f94e5500bad226c83e47145a808d7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/336
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The xgcc toolchain may be moved by the user and passed in on the commandline. Updates the Makefile and the xcompile script.
Change-Id: I05797b2cabce39bdd7868c2515f30d34043fc8cc
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/318
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
and add drivers/generic/generic back (empty), since it is used by many
devicetree.cb files.
Without this patch typos in component names in devicetree.cb cause
the component to be silently ignored.
Change-Id: I3cfca2725816f0cd7d72139ae53af815009e8ab4
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/270
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
If a file can't be added by cbfstool, print the type and name of the file
in the error message.
Change-Id: I369d6f5be09ec53ee5beea2cfea65a80407f0ba3
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/271
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
newer gcc versions generate ".section .text" instead of just ".text"
in their assembler output. This patch makes sure that we don't end up
with a superfluous ".section" that makes the build fail.
Add -Wno-unused-but-set-variable to CFLAGS if the flag exists.
Change-Id: I7f24c987433cc5886dde2af27498d3331cbda303
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/252
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Gcc 4.1 comes with an SSP https://wiki.ubuntu.com/GccSsp
This is disabled to work around '__stack_chk_fail' symbol not found failures
http://www.coreboot.org/FAQ/Obsolete#How_do_I_fix_stack_chk_fail_errors.3F
The presence of -fno-stack-protector is tested for automatically by configure.
Change-Id: I28ef158829f5935f985cfd5a5440733685cf479a
Reported-by: Raymond Danks <raymonddanks@gmail.com>
Signed-off-by: Raymond Danks <raymonddanks@gmail.com>
Reviewed-on: http://review.coreboot.org/112
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Older libpci version have headers using 'long long' which isn't allowed
in ANSI C. Since we cannot control the libpci version installed in the
system nor in generall have complete control over system headers, simply
skip using -Werror in our makefile.
Change-Id: Ibc1e57bef033bf4971f4108d078222dcf168d5e3
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/210
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The inline assembly for cpuid() was 32 bit specific. Additionally a
format string referencing a size_t argument wasn't using the %z length
modifier.
Change-Id: Iac4a4d5ca81f9bf67bb7b8772013bf6c289e4301
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/211
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
When building a position independent executable (PIE) EBX is used
internally by the compiler to generate position independent address
references so it cannot be used in the clobber list. Use the already
existing code for the Darwin plattform for that case, too -- it'll
preserve the EBX value.
Change-Id: Ief6d4872b8cd990856a0e8227a88bb228782aced
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/209
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The previous version is no longer available.
Change-Id: I8126617cfe9addeb4778f002398abbcb4c73d2c7
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/214
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
Following patch adds a userspace util genprof
which is able to convert the console printed
traces to gmon.out file used by gprof & friends.
The log2dress will replace the adresses in logfile
with a line numbers.
Change-Id: I9f716f3ff2522a24fbc844a1dd5e32ef49b540c5
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/179
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use sed instead of ${variable:start:length} and ${#variable}
Use single = in string comparisons
Use `eval echo '$'$variable` instead of ${!variable}
Use > file 2>&1 instead of &> file
Use readlink -f to expand the path of GCC configure
Change-Id: Idc7dfcea3922f55630a6855acdb19e36582708bd
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/165
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Change-Id: I09192e57e2535b2f8f98cabeb755f10c5520c499
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/151
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
`cp --remove-destination` isn't as portable as `rm -f` and `cp`.
Change-Id: Ib05bfc121f7a0b467f8104920e14fbd02191585f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/150
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
crossgcc also needs lzma support as w32api is distributed in .tar.lzma
Change-Id: Ia1938fa30262fe0c8bd655a08f9dc731a02e46ba
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/120
Tested-by: build bot (Jenkins)
We test for the presence of a couple of tools and even print an error.
But the tool didn't stop there.
Change-Id: I40dcf7894408ea7b24d5f68c76df4b7541f469bd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/111
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
That lint test requires some Kconfig defaults and uses allyesconfig
for that. Unfortunately that also draws in ccache and scanbuild support,
which significantly change the behaviour of the toplevel Makefile.
Notably, the ccache support breaks if no ccache is installed.
Change-Id: I17cbb7974be33fc077e5cbd5fb616a5b00a47d97
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/80
Tested-by: build bot (Jenkins)
To avoid using untrusted network to download code, copy the
relevant file to the repo and adapt "make gitconfig" to copy
from there.
Change-Id: I21f0b58d59250aa5d795cf289267ad93bd8d74db
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/73
Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested-by: build bot (Jenkins)
This has been tested on a Aaeon PFM-540I RevB PC104 SBC.
Change-Id: Ie02875a1fa2d90d7cc843ce745f727312f7b7aec
Signed-off-by: Mark Norman <mpnorman@gmail.com>
Reviewed-on: http://review.coreboot.org/43
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Jenkins can produce reports from JUnit test cases, so we fake testcases
for each board.
Change-Id: I34d46d15c83f4f04d2228f302eb626b261ac098d
Reviewed-on: http://review.coreboot.org/1
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
A couple of scenarios that were fixed in the last few revisions are
tested to ensure that it's easy to determine breakage.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This means that a simple:
$ make crossgcc
creates the reference toolchain in the correct directory. Thanks to the
dependency on the clean-for-update target, an existing .xcompile along
with any compiled objects in build/ will be cleaned out, so the next
build will automatically use the newly created reference toolchain.
Signed-off-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6598 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Windows, Mac and *nix type line endings are now taken care of.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6563 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
#if defined(CONFIG_FOO) && CONFIG_FOO anymore. This was partially implemented
but didn't work for symbols that were unset because of a missing dependency.
Patch taken from SeaBIOS.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6511 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Note that the registers and their defaults are mostly based on educated
guessing, due to the lack of datasheet.
Signed-off-by: Ruud Schramp <schramp@holmes.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6484 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html
It's about time we follow this advice.
Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and
drop unused CPP define
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add support for detecting/dumping the registers of Nuvoton W83627DHG-P/-PT.
This is a different chip than the Winbond W83627DHG (different IDs).
Signed-off-by: Prakash Punnoor <prakash@punnoor.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6468 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
See http://www.coreboot.org/DirectHW for more information
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6454 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
nvramtool couldn't handle certain combinations of sources for CMOS
layout and CMOS data. This change allows for nearly all combinations.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6437 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
i is a leftover from debugging, no longer needed. So just remove it.
Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com>
Acked-by: Sven Schnelle <svens@stackframe.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6424 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
lex.yy.c_shipped wasn't committed in r6420, which breaks the build
if you don't have the expert option checked that rebuilds those files.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6422 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Allow user to add 'subsystemid <vendor> <device> [inherit]' to devicetree.cb for
PCI and PCI domain devices.
Example:
device pci 00.0 on
subsystemid dead beef
end
If the user wants to have this ID inherited to all subdevices/functions,
he can add 'inherit', like in the following example:
device pci 00.0 on
subsystemid dead beef inherit
end
If the user don't want to inherit a Subsystem for a single device, he can
specify 'subsystemid 0 0' on this particular device.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6420 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This patch also disables FDC37M81x since it has a conflicting device ID
and is not supported very well anyway.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <reinauer@google.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: <jakllsch@kollasch.net>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It is a rather small 'Super I/O' device, containing a serial port, IR,
GPIO, and a Docking LPC switch. It is used in various Thinkpads.
Add 0x164e/0x16ef to the list of probed ports for NSC chips, as
Thinkpads are using this address pair.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6327 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The undocumented config argument for the -t option implicitly assumes
the config file is within the mainboard directory but fails to honor
this assumption when it comes to copying the file.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6314 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6313 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6312 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also: update one regex wrapper user.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6310 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6309 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6308 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6294 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
a plain binary file. Overrides using cmos.default in CBFS
if both -C and -D are given.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6286 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
When using this option, nvramtool looks for a cmos_layout.bin
and cmos.default in the image and uses these for layout information
and CMOS data.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6285 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
as loaded from a file).
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
files for CMOS data.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6283 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the CMOS checksum specification.
When using nvramtool on files (instead of CMOS and runtime firmware)
it's the only place.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6282 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to CBFS and adapt coreboot to use it.
Comments by Stefan and Mathias taken into account (except for
the build time failure if the table is missing when it should
exist and the "memory leak" in build_opt_tbl)
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6268 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6267 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
If a file "cmos.default", type "cmos default"(0xaa) is in CBFS,
a wrong checksum leads to coreboot rewriting the first 128 bytes
(except for clock data) with the data in cmos.default, then
reboots the system so every component of coreboot works with the
same set of values.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It dumps everything you ask for, but you might not
get what you expect if the file is compressed or
otherwise converted (eg. payloads in SELF format).
(Originally it would only extract "raw" files.
This is a change by me, as filetypes are commonly used
to differentiate raw data files --Patrick)
Signed-off-by: Aurelien Guillaume <aurelien@iwi.me>
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware by me.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add choice to use stable or master version of seabios repository
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Only skip probing if chip was found on the same port already to avoid
duplicates.
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Hence drop the FALLBACK_ prefix
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add support for dumping the MSRs on model_f2x and dumping GPIOs and PM
registers on ICH5. Add ICH5 and i865 to the supported chips list.
Enable the dumping of BAR6 on i865.
Sample output:
Disabling memory access:
$ sudo setpci -s 6.0 0x04.b=0x0
$ sudo ./inteltool -m | head -n 9
Intel CPU: Processor Type: 0, Family f, Model 2, Stepping 7
Intel Northbridge: 8086:2570 (i865)
Intel Southbridge: 8086:24d0 (ICH5)
============= MCHBAR ============
Access to BAR6 is currently disabled, attempting to enable.
Enabled successfully.
BAR6 = 0xfecf0000 (MEM)
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Update coreboot crossgcc toolchain, GDB 4.5.1, MPFR 3.0.0, GDB 7.2.
Add libelf_cv_elf_h_works=no to produce a libelf.h for Cygwin.
Add GDB patch to handle #pragma pack in the i386-elf gcc target.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6193 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Mostly done according to initial file creator.
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6192 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The datasheet is available on nuvoton's website.
http://www.nuvoton.com/NuvotonMOSS/Community/ProductInfo.aspx?
tp_GUID=cf73485c-9e0a-4218-9bee-89dfe9a7bb87
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6179 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Running result.
superiotool r6131
Found Winbond W83527HG (id=0xb0, rev=0x73) at 0x2e
The documentation is not available yet.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6169 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
broken them again. Instead rely on coreboot's dependencies to figure out
what to rebuild.
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6162 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
DOTCONFIG make variable (defaults to .config).
Let abuild use that.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6152 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add libelf_cv_elf_h_works=no to produce a libelf.h for Cygwin.
Add GDB patch to handle #pragma pack in the i386-elf gcc target.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6137 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The patch was tested by a user on IRC who had the F71889FG. I
wrote it using documentation from Fintek's website available here:
http://www.fintek.com.tw/files/productfiles/F71889_V0.28P.pdf
This patch also seems to work for the F71889ED, which uses 0x09 and 0x09 for
chip ID bytes 1 & 2. However, I have not been able to find documentation to
verify that the two chips are identical from superiotool's perspective.
Signed-off-by: David Hendricks <dhendrix@google.com>
Signed-off-by: Alec Ari <neotheuser@ymail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6131 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- pmbase is on southbridge function 3 on I82371XX
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6128 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
then left in because USBDEBUG was actively worked on.
This isn't true anymore, so drop it
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6119 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
"make lint" should not stop after first failed test.
Improve "make lint" output.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
make lint users)
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
sequences.
Increase scanning speed.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6090 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This isn't hooked up anywhere, so won't affect anything, except for
developers trying to remove configuration #defines.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6065 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- via/epia-n/mptable.c
- intel/eagleheights/mptable.c (commented out anyway)
- asus/p2b-d/mptable.c
- asus/p2b-ds/mptable.c
Some files still incorrectly contain some smp_write_ioapic() lines from
the original mptable utility target (Supermicro P4DPE), which has one
IOAPIC in the southbridge (Intel ICH3-S), two IOAPICs contained in
the first P64H2, and two more in the second P64H2, i.e. 5 IOAPICs in total.
However, none of the boards where this chunk of code is present has
multiple IOAPICs (and even if they had, the PCI devices where those are
located would probably be different anyway), so drop the incorrect
mptable.c contents.
Also drop the lines from the mptable utility, so that future mptable.c files
don't incorrectly inherit any of this stuff.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jonathan Kollasch <jakllsch@kollasch.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6006 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
local ints. This is wrong in most coreboot mptables, probably all
generated by util/mptable/mptable.c.
After fixing this now XP can boot in MPS mode on my M2V.
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop sig[], oem[], and productid[] fields in all mptable.c files, no
longer needed. The sig[] is always the same ("PCMP"), the oem[] is
currently also always the same ("COREBOOT"), and productid is being
passed into mptable_init() directly as string now.
- LAPIC_ADDR is passed in as parameter, too. While at the moment it's
always the same value that is passed in, the LAPIC base address could
also be relocated theoretically, so keep it as parameter for now.
- Fix a few productid entries, they were (partially) incorrect:
- DK8S2 (was "DK8X", copypaste)
- 939A785GMH (was "MAHOGANY", copypaste)
- X6DHE-G (was "X6DHE", incomplete board name)
- H8DME-2 (was "H8DMR", copypaste)
- H8QME-2+ (was "H8QME", incomplete board name)
- X6DHE-G2 (was "X6DHE", incomplete board name)
- X6DHR-iG2 (was "X6DHR-iG", incomplete board name)
- GA-M57SLI-S4 (was "M57SLI", incomplete board name)
- KINO-780AM2 (was "KINO", incomplete board name)
- DL145 G1 (was "DL145G1", small fix as per vendor website)
- DL145 G3 (was "TREX", wrong board name)
- DL165 G6 (was "HP DL165 G6", drop vendor)
- S2912 (was "S2895", copypaste)
- VT8454c (was "VIA VT8454C", drop vendor, lower-case "c")
- EPIA-N (was "P4DPE", copypaste)
- pc2500e (was "PC2500", incorrect name)
- S1850 (was "S2850", copy-paste)
- MS-7135 (was "MS7135")
- MS-9282 (was "MS9282")
- MS-9185 (was "MS9185")
- MS-9652 (was "K9ND MS-9652")
- Ultra 40 (was "ultra40")
- E326 (was "E325", copypaste)
- M4A785-M (was "TILAPIA", copypaste)
- P2B-D (was "ASUS P2B-D", drop vendor)
- P2B-DS (was "ASUS P2B-DS", drop vendor)
- Adapt the mptable utility to use mptable_init() too.
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5979 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
As both ioapic.h and acpi.h define a macro named "NMI", rename one
of them (NMI -> NMIType in acpi.h).
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The kernel initialization code as of boot protocol 2.10 is now reading the
kernel_alignment field. With the field left unset the kernel attempts to
align things to 4GB which is unlikely to work, so change the alignment to
the kernel's normal value of 16MB so newer kernels processed by mkelfImage
will boot.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5914 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Remove many more .c-includes from i945 based boards.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Long options of the form --opt=arg were not having the arg stripped
off into a another argument in the output. As a result, all long
options with args had to be written like "--opt arg" on the command
line to be recognized.
* The --remove option was shifting too many times.
As a bonus, I also added some logic to make "make distclean" cleanup
the default abuild build dir.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
statement to those files that actually need it. This significantly
reduces the number of dependencies, so it's no longer extremely ugly to
specify them manually (see the src/pc80/Makefile.inc portion)
- Add double include guards around option_table.h defines
- Also, drop the AMD DBM690T work around for the issue
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5838 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
While we're at it, improve DESTDIR handling
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5768 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
boards were specified in Kconfig, and abuild depended on that. Since that rev
it has only built qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Clubbering CFLAGS is never a good idea.
Signed-off-by: Anders Juel Jensen <andersjjensen@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5725 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
when adding for example build/coreboot_ram as parameter
it looks in the file for the PIRQ table prints it to stdout
and shows if the checksum is correct.
getpir works as before without any commandline parameters.
This is very handy for developing a PIRQ table.
Signed-off-by: Marc Bertens <mbertens@xs4all.nl>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5716 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Both are tested and appear to be working, however I'm not 100% clear
on if the NM10 has any other PCI IDs.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5709 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
supported Nuvoton chip, but identical to a Winbond, and Nuvoton is a subsidary
of Winbond, so for simplicity's sake I've added it to the Winbond file.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5706 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- print erroneous string in error message
- print line numbers starting from 1 instead of 0
- exit with return code 1 on errors
- check return values of fopen operations
- only create output file if input file was parsed without errors
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5701 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
detected and printed multiple times in probe_idregs_* functions where a
simple series of enter --> probe/print --> exit calls are made.
This patch adds a simple check after each set of those calls to make the
functions quit after a chip is found.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5689 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
aliased_name was a compatibility hack to match the output of the C rewrite
with the python version's results. It seems that we carried these
useless symbols with us for years, just without any impact good or bad.
By declaring devices static and tightening the screws (-Werror), the
compiler now knows that these declarations are useless - and stops.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stefan.reinauer@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5687 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
walking the tree.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5686 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
northbridge. Also add support for the very similar Q963/965 northbridge.
Tested:
D510: confirmed working, with MCHBAR enable code
Q965: writes to bit 0 to enable MCHBAR access are ignored, all other functions work
Untested:
D410/D525/N400: should be the same northbridge
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5665 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It matters for multifunction devices who don't have siblings.
The error in the rumba device tree created that situation.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5628 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
there is no free list.
Converting resource arrays to lists reduced the size of each device
struct from 1092 to 228 bytes.
Converting link arrays to lists reduced the size of each device struct
from 228 to 68 bytes.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5626 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Potentially caused by reordering. Going back to 4.4.4 which is known working on
Fam10 until gcc or the Fam10 code is fixed.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5570 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5568 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- IT8671F/IT8687R:
- Fix typo: Parallel port register 0x60 value is 0x03 (not 0x01).
- Fix typo: APC register 0xf6 is 0x00.
- Drop register 0x07 (LDN 0 / none), that's not useful and not listed in
any of the other Super I/Os either, it always contains the LDN number
selected "last time", which is useless.
- Fix indentation and other cosmetics.
- Cosmetics, and consistency fixes in LDN names of various Super I/Os.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Anders Jenbo <anders@jenbo.dk>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5535 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- The device tree must start with a chip (not a device)
- It's more clearly visible at which places chip, device, register and resource can be used.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5526 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
in device trees. Adapt sconfig as necessary.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5525 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Instead of accessing them globally, pass them as arguments where necessary.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5524 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Update generated parser files.
Add proper include path for utils.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5523 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5510 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ICH6 Southbridge,
82915 Series Northbridge,
P4 6xx Series CPU
to inteltool
Tested on my Clevo D900T, based on ICH6 and i915P, with a p4 630
installed.
Signed-off-by: Pat Erley <pat-lkml@erley.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Stefan Reinauer