Commit 2c102232e8 ("mb/amd/chausie,google/skyrim: increase
RW_MRC_CACHE size to 120 kByte") increased the MRC cache size, but with
the change the default AMD_FWM_POSITION_INDEX which is 5 for the 16MByte
flash size, the amdfw part won't be placed on the expected position,
since the cbfs header is in that exact location and cbfstool places the
amdfw part right after that. Change the AMD_FWM_POSITION_INDEX to 4 for
the non-chromeos builds to work around this.
TEST=Non-chromeos chausie build now boots and doesn't fail any more
before releasing the x86 cores from reset
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I89fe1d0672139e04070f05c6c8fa8955edcfc7ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70133
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new audio sku configure for Pujjo board.
BUG=b:260538412
TEST=Boot to OS on pujjo and check that audio are configured
based on fw_config.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ia9ddc683945002a0b19efd67006e1983b2eb9f2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Instead of using a fake lapic device hook up the cpu cluster to chip
cpu/intel/model_206ax.
The lapic device is also not needed as the mp init will allocate it for
the BSP at runtime.
Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Also remove the now unnecessary comments from the devicetree.
Change-Id: Iebbe12fd413b7a2eb1078a579e194eba821ada7c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The patch logs CSE RO's write protection information for Meteor Lake
platform. As part of write protection information, coreboot logs status
on CSE RO write protection and range. Also, logs error message if EOM
is disabled, and write protection for CSE RO is not enabled.
Port of commit abe0d810f0 ("soc/intel/alderlake: Log CSE RO write
protection info for ADL").
BUG=none
TEST=Verify the write protection details on google/rex.
Excerpt from google/rex coreboot log:
[DEBUG] ME: WP for RO is enabled : YES
[DEBUG] ME: RO write protection scope - Start=0x4000, End=0x396FFF
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Idb072a873a8b8323532799f5fc64f995c9f0a604
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
When retrieving the SKU id value through the sku_id() function in
mainboard_needs_pcie_init(), we only want the values in the lower 5
bits as we can only represent SKU id up to 27. Everything in the
higher bits should be masked out because they are not needed.
BUG=b:254281839
BRANCH=None
TEST=Make sure that NVMe is not initialized
Tested on a herobrine board with SKU id 0
Change-Id: I0e786ec392b5e1484cb2ff6d83a8d4fdd698950c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70164
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, we are getting the sku id from the EC every time we call
the sku_id() function. However, this will never change so we only
need to retrieve it once. Inserting exit condition if sku id is
already set, then don't get it from the EC again.
Also, removing the ram_code function, which does nothing right now.
There is already a weak stub_function for this in
src/lib/coreboot_table.c that already does the same thing.
BUG=b:260740438,b:182963902
BRANCH=None
TEST=make sure image still boots to login on herobrine device
Change-Id: Ia787968100baf58a41ccce0cf95ed3ec9ce1758a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
By default clang generates code with neon instructions. These are not
supported on all arm targets so default to fpu=none.
Change-Id: I48fc505107d131466be39f466151df62b2d2bd0b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69745
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang generated code uses this for zero initialized variables.
Change-Id: I460a0096918141c1cf8826bdf1853a3aa3aecff8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
When processing linker scripts clang needs to be set for the proper
target or it gets confused by other options.
Change-Id: I040aa14a06c728269ca1026e0002392e5ac8fef8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69744
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang warns about structs inside a union also needing the packed
attribute.
This files is copied from the chromeec project, so it adds comment next
to the coreboot specific changes as a reference.
TEST: google/vilboz remains the same with BUILD_TIMELESS=1 and gcc.
Change-Id: I8b5233618081db86caedcb2d14870974e109ed9b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
FSP silicon discards the request if the Voltage Regulator or SoC does
not support the feature.
BUG🅱️259057787
TEST:Verify that the feature is enabled by reading from pcode
No PnP regression observed
BRANCH=firmware-brya-14505.B
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e318534f1429af8ec06048430966344ddd346a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69579
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Jeremy Compostella <jeremy.compostella@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This only moves CPU configuration to a common place. Other PCI devices
can be done in follow-ups.
Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch supports multiple camera modules based on FW_CONFIG.
BUG=b:251235140
TEST=Test the changes with ov2740/hi556 camera.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0a4f46d889e9f6c2898efee6825cf2d02252d87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jim Lai <jim.lai@intel.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
This change disables unused PCIE RP8 and CLKSRC4. Without this change
sasukette cannot enter into s0ix properly.
BUG=b:259891452
TEST=Build and verified in sasukette
Change-Id: I61bcefa128d4f39613a760b647048f9e19e262c2
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This reverts commit 095c931cf1.
Previously cpu_info() was implemented with a struct on top of an
aligned stack. As FSP changed the stack value cpu_info() could not be
used in FSP context (which PPI is). Now cpu_info() uses GDT segments,
which FSP does not touch so it can be used.
This also exports cpu_infos from cpu.c as it's a convenient way to get
the struct device * for a certain index.
TESTED on aldrvp: FSP-S works and is able to run code on APs.
Change-Id: I3a40156ba275b572d7d1913d8c17c24b4c8f6d78
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69509
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The coreboot CPU index for a lapic is arbitrary: it depends on which
CPU obtains a spinlock first. Simply using an increasing index will
result in consistent ACPI tables across each boot.
Change-Id: Iaaaef213b32b33e3ec9f4874d576896c2335211c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69510
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ACPI DmaProperty for ethernet devices.
BUG=b:259716145
TEST=Verified SSDT on google/osiris.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I647593fd02644d30cd21b60d8305c0ec55dc64cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70017
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Skyrim devices share a common set of DPTC values to enable booting
with low/no battery. Rather than duplicating them in each variant's
overridetree.cb, move them into the baseboard/devicetree.cb.
BUG=b:217911928
TEST=tast run <IP> power.ShutdownWithCommandBatteryCutoff
Change-Id: I20f0a8259c2fc986da23026da88feadd69942046
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69904
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Name a variable based on its utility. `is_external` variable adds
`ExternalFacingPort` _DSD property to an ACPI device hence
rename it to `add_acpi_external_facing_port`.
BUG=b:259716145
TEST=Build google/rex with this flag and verify it in SSDT at
runtime.
SSDT snippet:
Name (_DSD, Package (0x04) // _DSD: Device-Specific Data
{
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package (0x01)
{
Package (0x02)
{
"HotPlugSupportInD3",
One
}
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package (0x01)
{
Package (0x02)
{
"ExternalFacingPort",
One
}
}
})
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I65100283ed9b65037c9890f28ecab41fcfa25d83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69970
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The message only makes sense if ACPI PM base address is
allowed to be dynamic. If requested, it can be logged
in common code.
Change-Id: Iad7a60098c0391cc23384035af49e373dad90233
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Later soc/intel/common/smbus addresses TCO2_STS as a separate
16-bit register, while baytrail and braswell assumes 32-bit
wide TCO1_STS to extend as TCO2_STS.
In src/soc/intel/denverton_ns:
#define TCO2_STS_SECOND_TO 0x02
In soc/intel/baytrail,braswell:
#define SECOND_TO_STS (1 << 17)
Elsewehere
#define SECOND_TO_STS (1 << 1)
It's expected that we remove the first (1 << 17) case and only
access TCO2_STS as a separate 16-bit register. For now, use
unique names to avoid confusion.
Change-Id: I07cc46a9d600b2bf2f23588b26891268e9ce4de0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tree is inconsistent with the use of TCO register space offsets and
related preprocessor defines. The legacy space was offset from ACPI
PM base by 0x60, but this changed with later platforms. The convenient
way is to define the TCO registers relative to its base address and
subtract 0x60 here, but this change cannot be easily done tree-wide or
in one go.
For the transient period, apply TCO_SPACE_NOT_YET_SPLIT flag until
all platforms use a clean style of tco_{read,write} accessor functions
instead of {read,write}_pmbase16(), or worse, inw/outl().
Change-Id: I16213cdb13f98fccb261004b31e81a9a44cb6e3b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Both SMM_ASEG and SMM_TSEG choices work.
There is periodic TCO timeout occurring.
At least with DEBUG_SMI kernel reports low memory corruption.
Change-Id: If20a7092117612a1a9e25eb6ac480e105acd57d7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This reverts commit 9f0e21a4da.
It should be allowed for i82801gx/early_init.c to have
#include <southbridge/intel/common/pmutil.h>
But there is a conflict:
src/southbridge/intel/common/pmutil.h:
#define TCO1_CNT 0x68
src/southbridge/intel/common/tco.h:
#define TCO1_CNT 0x08
Followup works resolve the difficulties around the offset
0x60 used for TCO register bank, tree-wide.
Change-Id: I827558a0e0ef1c4d1f866756df51cd1b2abfc7a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
mayan is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well. amd/mayan is started
as a copy of amd/birman.
Change-Id: Id6801e6c6e706ae3878ce9e2c3d6452964235148
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70010
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SATA is not supported on google/rex hence disable it.
BUG=none
TEST=Build and boot to google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I35a742ab9782feed86c3af514505d870d181b34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Fix compilation issue due to enum macro redefinition by safeguarding
definitions with DISPLAY_FSP_VERSION_INFO_2 in SoC Kconfig.
Back-ported from commit f7e8adac7b ("edk2-stable202005: Update
MdePkg/Include/IndustryStandard/SmBios.h") to fix compilation issue due
to enum macro redefinition.
BUG=b:260183604
TEST=Verify MTL Rex0 build with the patch
and verify the version output prints no junk data.
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.corp-partner.google.com>
Change-Id: Ibc65d05a8b4bd232b91184ff8cd52a20cd3538ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Enable NVMe GPIOs based on fw_config and add NVMe to devicetree.
Note, eMMC and NVMe are not probed in devicetree. On first boot in
factory, the device needs to boot with unprovisioned fw_config, so all
storage devices should be enabled when unprovisioned. Currently,
devicetree disables all probed devices when unprovisioned. If we want
eMMC and NVMe to be probed, support needs to be added for enabling
probed devices when unprovisioned.
BUG=b:259211172
TEST=Verified by ODM. On craask, LTE and WCAM still work. On craaskneto,
eMMC and NVMe SKUs can both boot.
Change-Id: I76a056cddff2246cfb5bb26ddbdfc333b49d9aaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69958
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch drops the local implementation
`log_me_ro_write_protection_info` and adopts the API from IA common
code (cse_lite.c).
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I087ffb8ac94f14a6bd7f2bf6bb907c4047dc9899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69969
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch creates an API for CSE-Lite specific SKU to retrieve the
Write Protect (WP) information (`cse_log_ro_write_protection_info`)
like WP range and limit, if the region is write-protected or not etc.
BUG=none
TEST=Able to compile the cse_lite.c file for google/kano without
any error.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8f4b7880534ded5401b6f8d601ded88019c636c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69968
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
As for mainboard mc_ehl1, a hard real-time dependency is also required
for this mainboard. The L1 prefetcher on Elkhart Lake is too aggressive
which in the end leads to an increased number of cache misses. Disabling
the L1 prefetcher boosts up the performance (in some cases by more than
10 %) in this specific use case.
Change-Id: I07b27dd672533e693a6c2987d16f54333850760e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Move the chip configuration to the cpu cluster device.
It looks like none of the devicetree were featuring a lapic 0xacac,
nor was tcc_offset ever set, so this remains a NOP.
Change-Id: I296631511b0e31b0ed43ca8193552483bdab4482
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These boards do no fill MADT with useful information.
Change-Id: Ie61e4e4b03c9b7fcd70aba7a2bd71eadd6f4dab1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69777
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Set of boards and platforms did not have LINT1 configured
as NMI source.
Change-Id: I65044125562bda363b3a0d92da6137c77a28b587
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69528
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the broadcast ID to deliver LINT1 as NMI to all CPUs,
instead of listing individual LAPIC IDs.
Change-Id: Iaf714d8c2aabd16c59c3bcebc4a207406fc85ca9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it
makes sense to have a unified name across different device drivers.
BUG=b:259716145
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A previous CL ("Add missing ACPI device path names",
commit d22500f0c61f8c8e10d8f4a24e3e2bf031163c07) caused some errors
from the Kernel on Brya devices (see Tim's comment on patchset 8):
> ACPI Error: AE_NOT_FOUND, While resolving a named reference
> package element - \_SB_.PCI0.FSPI
FSPI is defined in src/soc/intel/alderlake/chipset.cb:
device pci 1f.5 alias fast_spi on end
This CL adds the corresponding FSPI device to the DSDT to prevent
the error mentioned above.
TEST=Built and tested on brya by verifying the error is gone.
BUG=b:231582182
Change-Id: I11e89ad2a5d47f6b579f755b0a41399ee3cb856c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69920
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On a 32-bit host, uintptr_t is defined as 'unsigned int' instead of
'unsigend long int' like on a 64-bit host. When cbfstool is built on a
32-bit host, the printk format specifier '%lx' expects a 'long int'
while new_addr is of type 'uintptr_t', aka 'unsigned int'.
This in the end leads to a build error.
To fix this and make it build on both, 32- and 64-bit hosts, use PRIxPTR
as the format specifier. This macro will be resolved at compile time in
the right way on both, 32- and 64-bit hosts.
Test=Build cbfstool on 32- and 64-bit hosts.
Change-Id: Ia917d2ed31778f3a29c0a6c7368f74c15319b099
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69682
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The current IPU ES entry value is always set to true for RPL and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
On Raptor Lake silicon, the production binaries are backward
compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:258125833
TEST=Verify the Camera functionality by enabling the IPU secure mode
on RPL variants with both ES/QS silicon.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I9fd8ea0dd6ffdb16961bb017ba4388bf99e4d5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Perform a codec reset before configuring to avoid potential issues like
oryp5 had before 86f410479c ("mb/system76/oryp5: Reset HDA before
configuring").
Inspecting proprietary firmware for multiple boards shows that this is
always done as well.
Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
A function declaration without a prototype is deprecated in all versions
of C.
Change-Id: Ie22231908233f2fba25d78f6c5f53940011e8158
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69748
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For the most part, this doesn't change any post codes, simply making the
existing post-codes into macros.
picasso/romstage.c did get a couple of post codes removed to match the
other files.
The POST_ROMSTAGE and POST_BOOTBLOCK codes are intended to become global
at some point, while the POST_AGESA and POST_PSP codes would stay AMD
specific.
Change-Id: I007a09b6a3ed3280bac674cd74e298ec5c408ab7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Taken from Linux which also updated these files.
Clang only works with this syntax, so this fixes builds for arm.
TESTED on qemu vexpress-a9 and verstage on google/vilboz with
BUILD_TIMELESS=1, binaries remain the same.
Change-Id: Ia320dc2c460c99d934b8f17dee7748a9def4e750
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63058
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch decouples HECI disabling interface a.k.a SMM or PCR or PMC
IPC etc. from DISABLE_HECI1_AT_PRE_BOOT kconfig as Intel ME BWG
recommends to disable the CSE PCI device while CSE is in
software temporary disable state.
BUG=b:260183610
TEST=Able to build google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3c9c5a73028cde90af3553093a13d0c05b831bae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69930
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also, use {read,write}_pmbase16() in lpc.c file instead of inw/out.
Change-Id: Id281a3478051c4876ccbe26452d8744769c86654
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69878
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set downshift counter to 2 for all Marvell PHYs on this mainboard before
the PHY downshifts to the next highest speed.
Change-Id: I32b5f25a3e1e0f962dff3110143e236992ef8e7d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69887
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides the functionality to enable downshift on Marvell
PHY. By setting a downshift counter, the PHY is correspondingly often
attempted to establish Gigabit link before the PHY downshifts to the
next highest speed. The range is limited to 8 trials. To activate
downshift, a software reset must follow to take effect.
Change-Id: I4224eab6c1fc13824d53556c80435bc130a13bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69853
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On this mainboard Marvell PHY INTn is routed to LED[2] pin.
Change-Id: I28a78afdcf0599bb998f906ce8056a0586e24f33
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69434
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
INTn on Marvell PHY can be routed to LED[2] pin. This setting must be
made via LED Timer Control Register on page 3.
Change-Id: Ida1efbb604c382676b9d13ac8bf14de768f93637
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69433
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This mainboard has three Marvel PHYs connected to the internal SOC GbE
controllers. The default LED status after HW reset of this PHYs shows a
different mode than what is needed. LED[2] is not connected on this
mainboard.
This patch sets the following LED status:
LED[0] - 7 = On - 1000 Mbps Link, Off - Else
LED[1] - 1 = On - Link, Blink - Activity, Off - No Link
LED[2] - not connected
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides helper functions to read or write a register via the
MDIO bus. They can be used from drivers to easily access registers on
the MDIO bus.
Change-Id: I293d93435d27269a071b4b9b94a1b55307c575a7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This driver enables the usage of an external Marvell PHY 88E1512 which
should be connected to a SOC internal MAC controller. In a first step it
is only the framework of the driver. Functionality will follow with a
second patch.
Change-Id: I24011860caa7bb206770f9779eb34b689293db10
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch refactors the MDIO access for the TSN GbE device by placing
the MDIO read and write functions into mdio_bus_operations struct which
is assigned to the .ops_mdio member of the PCI device struct. In this
way the MDIO interface of the TSN GbE device is exposed and can be used
by other drivers if needed.
Change-Id: I5d1b9dd2f2ba8c18291fff314c13f0c3851784aa
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch extends the available device paths with a new device 'mdio'.
MDIO is the 'Management Data Input/Output' called interface which is
used to access an Ethernet PHY behind a MAC to change settings. The real
payload data path is not handled by this interface.
To address the PHY correctly on the MDIO bus, there is a 5 bit address
needed, which often can be configured via pins on the mainboard.
Therefore, the new introduced device has an 'addr' field to define its
address. If one wants to use a MDIO device in devicetree, the syntax is
straight forward (example):
device mdio 0x2 on end
As the MDIO interface is driven by the MAC, most likely this MDIO device
will be hooked in as a child device of the (PCI attached) MAC device.
With the new introduced ops_mdio a new interface is added to provide an
API for read and write access over MDIO.
Change-Id: I6691f92c4233bc30afc9029840b06f74bb1eb4b2
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69382
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch skips setting D0I3 bit for all HECI devices by FSP.
The learning being made from Alder Lake platform showed that the CSE
EOP cmd response time is highly nondeterministic and letting the EOP
cmd issued by FSP makes the response time even worse.
The idea being pursued during Alder Lake platform is to let FSP skip sending the EOP cmd and coreboot sends it at the last minute
(late sending of EOP) to ensure there is ample time for CSE to come
to a state where the response to the EOP is almost immediate.
There were a number of refactoring being done to ensure the EOP cmd
can be sent at the later stage.
#1: Ensure FSP is not putting those HECI devices into the D0i3. (SoC specific change)
#2: Modify the CSE related boot state based operation to allow a
proper window for sending late EOP cmd. (Common Code Specific change)
The entire refactoring helps us to save ~60ms of boot time.
Without those code change EOP sending timestamp as below:
943:after sending EOP to ME 1,248,328(61,954))
With those code change EOP sending timestamp as below:
943:after sending EOP to ME 1,231,660 (2,754)
Port of commit d6da4ef69e ("soc/intel/alderlake: Skip setting D0I3
bit for HECI devices") to incorporate the #1 which is a SoC specific
code change.
BUG=none
TEST=FSP-S UPD dump suggested `DisableD0I3SettingForHeci` UPD is
set to `1`.
Excerpt from google/rex coreboot log:
[SPEW ] DisableD0I3SettingForHeci : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I1c3765ce41f192ab5f5ff176e0a2b49b312d18d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Adjust SPD ID order
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 2 (0010)
H9JCNNNCP3MLYR-N6E 3 (0011)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3a62cf355508debce387c48d9d089e73763b2bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69784
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The brask doesn't include a real chassis so we don't need to configure
the fan setting in the overridetree.cb. Instead, we can leave the fan
running at full speed after the device boot up.
BUG=b:259643676
BRANCH=firmware-brya-14505.B
TEST=flashed the bios to the device and make sure the fan spinned
at full speed.
Change-Id: I6075b6171ca4d7b907679efd0ce7e355759385bc
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Based on the latest schematic to update the gpio table.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ifaf0629dcd77d21cf09fe84e760f1f22c075467f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Update the fields that need to be updated directly in the local static
usb_phy_config struct instead of dereferencing the pointer written to
the corresponding UPD field. This will allow updating the type of UPD
field in a follow-up commit to enable 64 bit coreboot builds.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44a9fe719e6803fc957fee3db13b261489ed313d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This ports forward part of commit df09680626 ("soc/amd/picasso: Add
support for 64bit builds") to the newer AMD SoCs.
Use -Wl instead of -l to get the output format that the commands in the
Makefile expect to extract the value for PSP_BIOSBIN_SIZE. Without this
change, readelf will split the output into two lines in case of a 64 bit
coreboot build. This results in invalid amdcompress and amdfwtool
command lines which will cause the amdfwtool call to fail with
Error: BIOS binary destination and uncompressed size are required
With the old readelf -l command we get this output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000080 0x0000000002030000 0x0000000002030000
0x0000000000010000 0x0000000000010000 RWE 0x10
while we get the correct output in a 32 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000060 0x02030000 0x02030000 0x10000 0x10000 RWE 0x20
With readelf -Wl we also get the expected output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x0000000002030000 0x0000000002030000 0x010000 0x010000 RWE 0x10
TEST=This fixes the 64 bit build on Cezanne with some follow-up patches
applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I35f9feda4d0da3546592dfac233ca66732bd5464
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69895
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Skip eDP initialization when we failed to get EDID. This prevents the
PLL assertion in dp_intf_config() if the display could not be
initialized properly.
BUG=b:233720142
TEST=boot to depthcharge on MT8188 EVB.
Change-Id: I0fd672b175feb9b813c1d9ec4140e4273079ff07
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69858
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use post_code() instead of 'outb(value, CONFIG_POST_IO_PORT)'.
Change-Id: I1ba6bff810b61a1249cda6e96eb40f4a81381322
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
All parameters of DPTC_INPUT() need to be configured on devicetree
when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without
configurations on devicetree would be 0 when
SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document
#57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA
and vrm_soc_current_limit_mA on devicetree with thermal table config E
as default table for SMT. Since the dynamic thermal table switching
mechanism is still under cooking, after discussing with thermal team,
suggest adopting config E(limit Soc not reach to max power) as default
thermal config to avoidany thermal-related issue during phase build.
Once the dynamic thermal table switching mechanism is finished, will
change the default value to config A.
BUG=b:258572474, b:248976976, b:259167917, b:257394883
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
This patch helps to save 10.200ms of booting time without any issue
seen during MP Init. All cores are out from reset and alive.
Port the Alder Lake 'commit 6526e78967 ("soc/intel/alderlake: Select X86_INIT_NEED_1_SIPI Kconfig for RPL")' also to Meteor Lake.
Additionally, no performance degradation is observed while running
benchmarks.
BUG=b:211770003
TEST=Able to boot Google, Rex to ChromeOS with all cores enabled.
Without this patch:
30:device enumeration 1,480,217 (28,232)
With this patch:
30:device enumeration 1,472,466 (18,334)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iec21470b9b34514169789c39bdc3be4e4ff6c7b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69851
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For the most part, this just moves the existing post codes into macros
so that they're not just bare numbers.
cache_as_ram.S:
Post code 0x28 was previously pointless with just a single jump between
it and post code 0x29, car_init_done. This code was removed, and the
0x28 value was used to differentiate the car_nem_enhanced subroutine
from the other 0x26 post codes used before calling the clear_car
subroutine.
All other post codes remain identical.
POST_BOOTBLOCK and POST_CODE_ZERO are expected to become global, whereas
the POST_SOC codes are expected to be Intel only.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I82a34960ae73fc263359e4519234ee78e7e3daab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69865
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This moves a lot of post code values, but unifies them between
platforms, so that the same value means the same thing as much as
possible.
The P4-netburst code was the most extensive and most different, so that
dictated the majority of the values. Three were two values there that
didn't match the other files, so those two values, 0x22 & 0x29 have
duplicate entries in the table.
The rest of the entries are similar between platforms, though the values
for many of them were moved to match the P4-netburst values.
POST_BOOTBLOCK and POST_POSTCAR values are intended to eventually become
global, while POST_SOC would be specific to the Intel platforms.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If13e40b700a41d56bca85510d68da0ab31a235a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69866
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It shouldn't be assumed that all variants of skyrim will use the same
gpio for TPM interrupts.
Use the PSP's new mailbox command to tell it what gpio the tpm interrupt
comes in on.
BUG=b:248193764
TEST=tast run <ip> hwsec.TPMContest
Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK
Use incorrect GPIO in mailbox cmd and verify TPMContest test
failed.
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For nissa, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
BUG=b:234776154
TEST=Boot to OS on nirwen and yaviks UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Cq-Depend: chrome-internal:5102230
Change-Id: I68f963e17bc0dbf9db9adaaa3f96f06b8737523b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
BUG=b:253387689
Test:Boot to OS on craask and check SAR Proximity Sensor GPIO pin
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I2b2a2516890b68036e96d1a542e6a10a098cb6a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69790
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Move smbios_ec_revision to ocp folder so that all ocp boards
share the same function without implementing again.
TESTED=Execute "dmidecode -t 0" to check corresponding field.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CBFS_MCACHE is currently experiencing overflow with CBFS verification
enabled. Reduce the pre-x86 cbmem console size from ~5.5 KiB to 4 KiB.
This reduction along with the available free space in PSP shared buffer
(32 KiB) helps to increase the CBFS_MCACHE size from 8 KiB to required
14 KiB.
BUG=b:259342909
TEST=Build and boot to OS in Skyrim. Ensure that there are no CBFS
mcache overflows.
FMAP: area COREBOOT found @ 80a000 (8347648 bytes)
VB2:vb2_digest_init() 0 bytes, hash algo 2, HW acceleration unsupported
CBFS: mcache @0x00019a40 built for 67 files, used 0x19a0 of 0x1c00 bytes
CBFS: Found 'apu/amdfw_a' @0x0 size 0x3ff80 in mcache @0x0001b640
VB2:vb2_digest_init() 262016 bytes, hash algo 2, HW acceleration enabled
Ensure that firmware_CbfsMcache FAFT test is successful.
Change-Id: I35e1a8c6d73e0870b6a43aac604f83a0b6c3aabe
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69827
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE is nowadays defined in
vboot/firmware/2lib/include/2constants.h, so update the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7c9a5476ae06d4bac762da1729aff878b7d0965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The patch parses CPU and PCH Trace Hub modes from the debug area in the
Descriptor Region. The modes can be updated in the debug area in order
to configure the CPU and PCH Trace Hub modes. The debug area's offset
starts from the SPI Flash offset:0xf00.
For runtime debugging, the OEM Section in the Descriptor Region is being
used as debug area. The OEM Section details are documented in the SPI
Programmer Guide of CSE Lite kit.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I61241c5c1981ddc4b21581bb3ed9f531da5f41b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
One register configuring multi-pin functions was outside of the Global
Configuration Registers space and skipped in the initial port patches.
Replicate the vendor configuration and set the Super I/O pin for PECI
functionality.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I90f142a1a9ee27dd061fc71b791bd4c7df97da6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68711
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add pcie_find_dsn() to detect and match PCIe device serial
number. In addition, vendor ID is matched when provided.
Change-Id: I54b6dc42c8da47cd7b4447ab23a6a21562c7618
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Add initial CEDT (CXL Early Discovery Table) support based on
CXL spec 2.0 section 9.14.1.
Add functions to create CEDT table (revision 1), and create CEDT
CXL Host Bridge Structure (CHBS) and CXL Fixed Memory Windows
Structure (CFMWS).
TESTED=Create CEDT table on Intel Archer City CRB, dumped the
CEDT table and examined the content.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4fbce78efc86ad9f2468c37b4827a6dadbdc6802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
There is a note about the default I2C speed of this being 400 kHz
despite the logic in rx6110sa.c sets the fallback (correctly) to
100 kHz.
This information originally comes from the fact the dw_i2c bus
controller default speed is 400 kHz. This is irrelevant to
the default speed of this device as it can be used with any
bus controller.
BUG=none
TEST=coreboot builds correctly (no functional changes).
Change-Id: Ic0ffe5667574c59e1c1df952b84b8a3680b53341
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69545
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit doesn't add any new format options, just makes selecting
existing format explicit.
Ticket: https://ticket.coreboot.org/issues/422
Change-Id: I3903aff54e01093bc9ea75862bbf5989cc6e6c55
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
This change enables the DisplayPort detection at preboot for Rex board.
BUG=b:247670186
TEST=Built image and validated DisplayPort feature at preboot on Rex.
Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
After DisplayPort is plugged into type-C port, its hpd signal
instantly presents and EC has mux_info for dp and hpd. This change
fixes the DP detection flow to avoid the 1 second delay while no DP
is connected. If DP is present, there will be requests towards PMC
through the sequence of connect, safe mode, dp and hpd mode.
BUG=b:247670186
TEST=Built image and validated the DisplayPort preboot feature on Rex.
Change-Id: I7cb95ec7fcc7e1a86e86466e6d45390eedcc4531
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Update definitions on glinda used by birman.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I03065011581489b5345c16e225edc341e1d7811c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Update definitions to match morgana FSP.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic893526789c05a298965702114d4a814466a5742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all
references.
BUG=b:216485035,b:258126464
BRANCH=none
TEST=none
Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
BUG=b:235919755
Test=Check error message "Exposing GPIOs in Power Resource and _CRS"
not show in firmware log.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I21a47adde48555098d041b94d483cad308bdb717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Set `EnableTcoTimer=1` in order to keep FSP from
1) enabling ACPI Timer emulation in uCode.
2) disabling the PM ACPI Timer.
Both actions are now done in coreboot.
`EnableTcoTimer=1` makes FSP skip these steps in any possible case
including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP
Multiphase Init. This way full control is left to coreboot.
Port of commit 0e905801f8 ("soc/intel: transition full control over PM
Timer from FSP to coreboot").
NOTE: This will have a huge power impact when it's enabled. If TCO timer
is disabled, uCode ACPI timer emulation must be enabled, and WDAT table
must not be exposed to the OS.
BUG=none
TEST=Boot to OS on google/rex.
Excerpt from google/rex coreboot log:
[SPEW ] EnableTcoTimer = 1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2693f0390e6c9fa92fec366ab87589c3bcea9027
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that
ACPI PM timer remains disabled.
The PM timer (by PMC IP) consumes more power and blocks S0ix so the
timer is emulated by ucode to save power and unblock S0ix.
TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc
BIT 1 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The coreboot build system automatically adds a `config` file to CBFS
that lists the exact Kconfig configuration that this image was built
with. This is useful to reproduce a build after the fact or to check
whether support for a specific feature is enabled in the image.
However, the file is currently generated using the `savedefconfig`
command to Kconfig, which generates the minimal .config file that is
needed to produce the required config in a coreboot build. This is fine
for reproduction, but bad when you want to check if a certain config was
enabled, since many configs get enabled by default or pulled in through
another config's `select` statement and thus don't show up in the
defconfig.
This patch tries to fix that second use case by instead including the
full .config instead. In order to save some space, we can remove all
comments (e.g. `# CONFIG_XXX is not set`) from the file, which still
makes it easy to test for a specific config (if it's in the file you can
extract the right value, if not you can assume it was set to `n`). We
can also LZMA compress it since this file is never read by firmware
itself and only intended for later re-extraction via cbfstool, which
always has LZMA support included.
On a sample Trogdor device the existing (uncompressed) `config` file
takes up 519 bytes in CBFS, whereas the new (compressed) file after this
patch will take up 1832 bytes -- still a small amount that should
hopefully not break the bank for anyone.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Set the logging message prefix to the device name instead of the
device path in order to make the output consistent with other
logging messages in this and other drivers.
Change-Id: Ib63b93d52aad220d17f1f4ee0d47a949933ec26d
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69718
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Instead of creating a dummy I2C device in order to force Linux to
decrease the I2C bus speed, use the own 'bus_speed' field of RV3028
device config structure.
Linux should always set the bus speed to the speed of the slowest
device sitting on the bus. Hence the dummy device is not needed
here anymore.
BUG=none
TEST=See if the RV3028 RTC is visible and working (date/time can
be set/read) in Linux. At the time, a driver modification is needed
to add a match table for the "MCRY3028" ACPI HID. A proper kernel
patch is pending.
Change-Id: I6e269dc67d1fe2a6747fcf3bee224def7b553f08
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69544
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Add ACPI generation callback to the driver after obtaining the
ACPI HID "MCRY3028" for this device from Microcrystal AG (VID: "MCRY").
Also add I2C bus speed field to the device config structure, which
is a required ACPI entry.
BUG=none
TEST=Disassemble the SSDT table and see whether the device entry
"MC28" is generated correctly. Also check whether the RV3028 driver
in Linux (drivers/rtc/rtc-rv-3028.c) is bound correctly after adding
an ACPI match table to it containing the HID. A proper kernel patch
is pending.
Change-Id: I3b8cf5c8dc551439755992ff05b6693e91cc3f21
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: I6e4341555a3b03a531bd94ba5e36cbcadda9c663
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69624
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Update acpigen_write_alib_dptc() to support extra 5 thermal profiles.
User can use these profiles for dynamic thermal table switching support.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9e6d5c0fc6f492340c935899920d9ee7c9396256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68470
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Issue:
Device can't wake up using power key.
Root cause and solution:
EINT event mask register is used to mask EINT wakeup sources. All
wakeup sources are masked by default. So we add a driver here to unmask
all wakeup sources.
BUG=none
TEST=wake the device up by power key on MT8188 EVB.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I94b20909b0b8d77f75c41bc745f892baded7a54b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69688
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
On Herobrine, we will determine if we have an NVMe device based on SKU
id. Basically, if bit 0 is 2 (or Z), then we know that we have an
NVMe device and thus will need to go through PCIe initialization.
Otherwise, we know that we are booting an eMMC device.
BUG=b:254281839
BRANCH=None
TEST=build firmware image and boot and make sure we can boot up Tested
on villager, which does not have NVMe and made sure that it boots
still. Check cbmem dump to make sure that device configuration
entry is still low since it's not initializing PCIe devices:
40:device configuration 730,203 (1,295)
Change-Id: I1fa0ad392ba6320fdbab54b3b5dc83ac28cd20ba
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69690
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement mainboard_needs_pcie_init() for herobrine in order to
determine if we need to initialize the pcie links. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with
NVMe will fail to boot.
BUG=b:254281839
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Modify the chromeos FMD file for nissa variants to redistribute the
buffer in SI_ME region obtained due to CSE size optimizations to SI_BIOS
region.
1. Modify SI_ALL region size to 3712K. SI_DESC remains at 4K and SI_ME
is 3708K.
2. Modify SI_BIOS region to 12672K. This results in an addition of 32K
buffer each to FW_MAIN_A/B regions.
BUG=b:228936671
BRANCH=firmware-nissa-15217.B
TEST=Verify CSE FW update with new FMD and ME RW blobs on craask.
Cq-Depend: chrome-internal:5094491
Change-Id: I5ead2f81850a2aa79e677c7f271db672e235750a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
BUG=b:256754175
TEST=Build test image and use PTAT to check IA and GT value
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ife36655f077bae567bff3c3e33f779c990cf5ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69135
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
No boards now have a missing dependency so remove the workaround.
Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
_PRS only makes sense if _SRS is implemented.
Change-Id: I030bd716215b5ac5738e00ebf6ed991d9d6c5ca0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Simply return the current resource settings in the _PRS method. This
means that coreboot has to correctly set up the resources on the
device. This won't result in any regression as without _PRS the ACPI
OS would not know what resources settings are valid, so it would never
use _SRS.
Change-Id: I2726714cbe076fc7c772c06883d8551400ff2baa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64218
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Read FRU product info of PSU to get Type 39 required information.
Further development needed if multi-record info of PSU FRU is required.
For now, the read_fru_areas() only read product chassis and board info.
Signed-off-by: lichenchen.carl <lichenchen.carl@bytedance.com>
Signed-off-by: ziang <ziang.wang@intel.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I18d056cba1a79b0775c8a42b3a879e819887adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
This patch adds unique device-locators, bank-locators and
asset-tags to the smbios type17 tables by making use of a
DIMMs controller-ID. This way we avoid name clashes when,
for example, two DIMMs share the same channel-ID and DIMM-ID
but have a distinct controller-ID.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I8aef79faa43f2475485f581c675ee152e580f678
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update touchscreen setting.
Change hid as panel team request to fix touchscreen with no function.
The panel team verification result is on b/251378772 comment#17.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
None of the touchscreens (over I2C) used in the rex program requires
exporting GPIOs in the ACPI _CRS method.
This can cause i2c devices to malfunction or cause timing
sequence violations if ACPI exports a PowerResource for the
device that uses GPIOs that are also exported in _CRS.
BUG=none
TEST=Able to build and boot Google, Rex platform.
Without this patch:
[ERROR] I2C: 00:10: Exposing GPIOs in Power Resource and _CRS
With this patch:
None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I578a60eff27f94d6dc94b900604bc7560337d60b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69612
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tune timing between power on and reset on SD device RTD3.
BUG=b:250746988
TEST=Use the value to boot on Pujjo successfully.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I1ea77ec8381000249229653f1c0b9044bdf7866d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
It is no longer necessary to explicitly add "CRIT: " in front of
BIOS_CRIT message.
Change-Id: I506c1d278960c91d1283e9b1936c9c1678a10e17
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
It is no longer necessary to explicitly add "ERROR: " in front of
BIOS_ERR message.
Change-Id: I36e2785ae567d82339212140c1bde0876dfd450d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
default SOC_INTEL_COMMON_BLOCK_SGX_PRMRR_SIZE value is missing by
accident for SOC_INTEL_COMMON_BLOCK_SGX_PRMRR_SIZE_32MB.
Change-Id: Ib3af0a1c509ab2e2eccf3e36ff604a1040995af4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69332
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: If1645180dd98ff5a1661fd568554de5831ef237e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69623
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per Intel doc #627331 Section 3.6.1 "Intel CSME Production Machine
Determination", from ADL onwards there are three criteria which
determine whether a device is in production mode:
1. Fuses are programmed
2. SPI descriptor is locked
3. Manufacturing variables are locked
When logging whether the device is in manufacturing mode, 1 and 2 are
already checked. Add a check for 3 as well.
Also add logs for each individual criteria so it's easy to tell why the
overall Manufacturing Mode is set or not.
BUG=b:255462682
TEST=On a nivviks which has not gone through EOM:
Before:
[DEBUG] ME: Manufacturing Mode : YES
[DEBUG] ME: SPI Protection Mode Enabled : NO
After:
[DEBUG] ME: Manufacturing Mode : YES
[DEBUG] ME: SPI Protection Mode Enabled : NO
[DEBUG] ME: FPFs Committed : NO
[DEBUG] ME: Manufacturing Vars Locked : NO
On an anahera which has gone through EOM:
Before:
[DEBUG] ME: Manufacturing Mode : NO
[DEBUG] ME: SPI Protection Mode Enabled : YES
After:
[DEBUG] ME: Manufacturing Mode : NO
[DEBUG] ME: SPI Protection Mode Enabled : YES
[DEBUG] ME: FPFs Committed : YES
[DEBUG] ME: Manufacturing Vars Locked : YES
Change-Id: Iac605baa291ab5cc5f28464006f4828c12c748fe
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69324
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update Alder Lake CSME HFSTS registers definitions as per Intel
doc #627331 revision 1.0.0, section 3.4.8.
Follow up CLs will use the bit definitions for performing
various checks.
TEST=build and boot nivviks platform
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I9aeee7a3b41ad59c03391207930a253ffff19ae5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69286
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 9bbc039c45 ("soc/intel/skylake:
Hook up FSP hyper-threading setting to option API") already hooks up
the `hyper_threading` CMOS option in SoC code, so there's no need to
do it from mainboard code.
Change-Id: I602452266a8465cced12454f800ea023f382ba6f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69522
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `hyper_threading` CMOS option was hooked up to the wrong enumeration
and lacked a default value in `cmos.default`. Thus, use the correct enum
for the `hyper_threading` option, remove the now-unused "backwards" enum
and provide a default value in `cmos.default`.
Change-Id: I2ee9ced2881ed5e348e84a35e8abd6b7a363d936
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69491
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the implementation more similar to i82801gx, enabling
ACPI PM and GPIO register spaces already in bootblock.
Change-Id: I41ad8622801dbbadafdc37359d521eed42256e63
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
When ACPI GPE0 block was extended to 64 events or 8 bytes,
ACPI PM register space was slightly modified. After
adjustment, PM2_CNT register moved to 0x50 where register
SS_CNT was previously defined to be.
For platforms that have a valid use for PM2_CNT==0x50 in
their FADT, remove overlapping definition of SS_CNT.
On i82801dx/gx ACPI GPE0 supports 32 events, reset_gpe0_status()
incorrectly addressed also GPE0_EN register. For a bit cleaner
implementation, define GPE0_HAS_64_EVENTS.
Change-Id: Iec83e9010146ebd487a61f542ac5c6f4c6a60833
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
If TSEG is not enabled, smm_region() should not reserve the region, so
add a test for T_EN flag in ESMRAMC.
For the SMM_ASEG case this moves CBMEM immediately below top-of-ram.
Change-Id: I2da4b846d0767afe00e98fdee375914c1875ddf5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This reverts commit d164feb726.
Reason for revert: Herobrine program decided that we wanted
to be able to boot from NVMe if one exists.
Change-Id: I2d3217c514734608e2ff049b620f4c7acf86de89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69720
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 1b07797a7b.
Reason for revert: Herobrine program decided that we wanted
to be able to boot from NVMe if one exists.
Change-Id: If675947026095d16b72bdb0f3ec790e583523465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69719
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ALC5682-VS/ALC5682-VD use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682I-VS: _HID = "RTL5682"
ALC5682-VD: _HID = "10EC5682"
BUG=b:246491349
TEST=ALC5682-VD/ALC5682-VS audio codec can work.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I60d5e0af7e2dabd134c8059eaeac388d40ac2073
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
As per Intel doc #729124 Section 3.6.1 "Intel CSME Production Machine
Determination", from ADL onwards there are three criteria which
determine whether a device is in production mode:
1. Fuses are programmed
2. SPI descriptor is locked
3. Manufacturing variables are locked
When logging whether the device is in manufacturing mode, #1 and #2 are
already checked. Add a check for #3 as well.
TEST=Build and boot MTL RVP
Snippet from coreboot log:
[DEBUG] ME: Manufacturing Mode : YES
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I495a7d8730716fc92e8c57b2caef73e8bb44d30b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
The patch updates HFSTS4, HFSTS5 & HFSTS6 register definitions as per
MTL Intel CSME BIOS Specification (doc# 729124). Also, the patch logs
the firmware status details as per the new register definition.
TEST=Build and boot the coreboot on Rex
Snippet from coreboot log with the patch:
[DEBUG] ME: CPU Debug Disabled : NO
[DEBUG] ME: TXT Support : NO
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ibee9a0955efc22ea0d9fdbba2d09e57d8851e22e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69577
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hide these ACPI device so Windows does not warn about missing device
drivers.
Port of commit 907c85ad48 ("soc/intel/alderlake: Hide PMC and IOM
devices").
BUG=none
TEST=Verified _STA method from ACPI tables in OS. USB-C drive is
detected in OS.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic62172bee9120d260a3cd60770ef780cb7dce860
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69576
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update header files for FSP for Meteor Lake platform to
version 2404_00, previous version being 2364_00.
FSPM:
1. Address offset changes
2. Rename `PlatformDebugConsent` to `PlatformDebugOption`
FSPS:
1. Address offset changes
Additionally, incorporate the UPD name change for MTL romstage.
BUG=b:255481471
TEST=Able to build and boot Google, Rex to ChromeOS.
Signed-off-by: vjadeja-intel <vikrant.l.jadeja@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I63ef4ecb6569141542a3b9bf4ee8cbcd2946582e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable ISH driver and set firmware name as "adl_ish_lite.bin"
BUG=b:242291814
TEST=boot into kernel, and check dmesg
"ISH firmware intel/adl_ish_lite.bin loaded"
Change-Id: I4badabba1a0cfceb77fc91f21953496152f19615
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69606
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove TODO comments after reviwing against morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I598daf40a774ec81a956ce8c1aeb1cbbf4b475f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69275
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
