Change stop_delay_ms time(T3) from 180 to 150 to meet specification.
T3 min-value of HID-I2C should be 150ms.
BUG=b:267280863
TEST=emerge-skyrim coreboot chromeos-bootimage.
Change-Id: I7ef7db4edaecece1fa5ab07e30a80e556ed35f8b
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This separates the SPL fusing function into a separate C file which can
be excluded if it is not needed. This allows the psp_set_spl_fuse()
function to be made static again as the state of the function will
always match the boot_state entry.
Move the required #defines to the common header file so they can be
used by both psp_gen2.c & spl_fuse.c.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifbc774a370dd35a5c1e82f271816e8a036745ad5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73655
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Even though right now TSEG will always be located below 4GB, better not
make assumptions in the SMM relocation code. Instead of clearing the
higher 32 bits and just assigning the TSEG base and per-core SMM base to
the lower 32 bits of the MSR, assign those two base addresses to the raw
64 bit MSR value to not truncate the base addresses. Since TSEG will
realistically never be larger than 4GB and it needs to be aligned to its
power-of-two size, the TSEG mask still only needs to affect the lower
half of the corresponding MSR value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1004b5e05a7dba83b76b93b3e7152aef7db58f4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5923df84f0eb3a28ba6eda4a06c7421f4459e560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibc5d64c74eaabfc4b7834a34410b48f590f78a12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On IBM/SBP1 with 384 cores it takes a while for all APs
to check in. Use linear scaling instead of hardcoding an
arbitrary limit for the timeout.
Change-Id: If020a3fa985bfc7fd2f0aa836dc04e6647a1a450
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: TangYiwei
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Set DmiMaxLinkSpeed to 4 in FSP to ensure that FSP always supports
PCIe Gen 4 drives.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0e31919122dacfbdc2486fa8216a28b479f3bd00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
There are two versions for lastbus:
Version 1 for MT8186, and version 2 for MT8188.
BUG=b:263753374
TEST=build pass.
Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
For simplicity, OEM devices are given a single codename per build variant. Winterhold was intended to be the lead device and was chosen as the code name for this OEM. Unfortunately, Winterhold was cancelled. We attempted to rename Winterhold to Whiterun to avoid future confusion. Again, unfortunately, since some devices were already built, changing the name requires a manual change to force the firmware to be taken by the DUT. This was not a reasonable path forward, so we're abandoning the naming to Whiterun.
This reverts commit af69de494e.
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idef95f0f4f369b235937e1806ce57c427e441f21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73583
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The get_threads_per_core function isn't specific to the non-CAR CPUs and
also applies for Stoneyridge and even for family 16h model 30h outside
of soc/amd, so move it from the non-CAR-specific cpu.c file to the
common AMD SoC cpu.c file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I05946f163112ff93f33139f6c43fed5820fd0a3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Add a paragraph to the help text for VGA_BIOS_ID to explain which PCI ID
needs to be used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a0f25481e275b7d190f29f5670cc98443dbe719
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73613
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso already uses the Cxxx ACPI CPU device naming scheme, due to it
being what the AGESA reference code uses. We initially relied on the
AGESA/FSP generated SSDT for the P- and C-state support before we had a
native implementation for this in coreboot. The Cxxx naming scheme can
also be used for the other AMD SoCs except Stoneyridge which is pre-Zen
and doesn't select SOC_AMD_COMMON_BLOCK_NONCAR. The main advantage of
using Cxxx instead of CPxx is that the Cxxx scheme supports systems with
more than 256 CPU threads.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I884f5c0f234b5a3942dacd60847b2f095f9c0704
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73620
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For Intel SPR-SP, the SAD device is hidden, so pcidev_path_on_bus()
returns NULL. Therefore use pci_s_write_config32() instead.
Move lock_pam0123() from finalize.c to util.c, to be together with
unlock_pam_regions().
Change-Id: Ib08d423d8c4d482612077b66dab3878018da8f2b
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Intel SPR-SP has its specific way to get the bus number of ubox.
Move the current implementations to CPX-SP and SKX-SP folders.
Change-Id: I2b69be74d140115f9f78bc991fb690e3c90c88db
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This reverts commit b42ca4d0b2.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: I79da9143cc63459e7e29431eff2cb14200424b37
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit 35354583cd.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: Ie82cbafd4bea2416526e2847738802a05ed45582
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Only call cbfs_boot_map_optionrom/cbfs_boot_map_optionrom_revision once
and pass the already remapped PCI ID to it. This avoids the spurious
warning that the CBFS file wasn't found from the first
cbfs_boot_map_optionrom call in cases where the PCI ID needs to be
remapped to get the right ID for which a file in CBFS exists.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If7da78c69dd702280a78996a5823972516e0319b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73612
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPE number used for XHCI has now been defined in AMD's common code
in CB:67936. Change over existing code to use this new definition.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on nipperkin device and verified that XHCI events string use
GPE 31.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I9c2a44f7d2eb47422ae8c585e5e01ea0b420d461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69917
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPE number used for XHCI has now been defined in AMD's common code
in CB:67936. Change over existing code to use this new definition.
BUG=b:186792595
TEST=Ran on skyrim device and verified XHCI GPE setting.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I3bfc2256ea2ca851afe88f2cdb419f39eee76fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69916
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD SoCs currently only log the GPE# when an XHCI controller wakes the
system. Add code to log XHCI wake events to the elog.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: Ic0489e1df55c4e63cb8a306099e3f31c82eebd58
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
- Remove functions that are only called in one place.
- Add warning if user doesn't supply a platform, since that can lead to
dumps/layouts that do not include all IFD regions without the user
even reliazing it.
- Inform the User if IFD or Flashmap is not found.
- Inform the User if there is not a single match between FMAP and IFD
region
- Avoid printing usage if not specifically asked by the user.
It tends to obfuscate the original error message.
- Keep indentation consistent throughout the file.
- Remove typedefs (coreboot coding style)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I7bbce63ecb2e920530394766f58b5ea6f72852e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Winterhold boards populate either NVMe or eMMC, but not both.
This means that there is always one link that is unpopulated. The PCIe
configuration code takes longer to verify that a link is unpopulated
than to just train the link, so this slows down the boot by roughly
80ms vs the case when the device is present. Not training the device
at all lowers boot time by another 20ms, for a total of 100ms saved.
Looking at the NVMe CLKREQ signal before initializing the ports allows
us to identify which device is populated and only initialize that
device.
BUG=b:271569628
TEST=Boot Whiterun and eMMC or NVMe correctly work, boot time is lower.
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0b87f5e968cd1c87e62a1c0fbdee1fc0723f655d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
These ports are not hot pluggable, so drop the parameter, which
will result it in being set to zero / not enabled.
BUG=none
TEST=build boot skyrim, verify all PCIe devices functional.
BRANCH=skyrim
Change-Id: Iaa55cc765e8f073b31f25771633789ac13e2fffa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Enable both L1.1 and L1.2 substates for the WiFi, SD card reader,
and SSD (both NVMe and eMMC). If a given device does not support
a particular substate, then it will not be enabled during PCIe
enumeration by coreboot.
BUG=b:270690572
TEST=build/boot multiple skyrim/whiterun/frostflow SKUs with different
storage configs, verify WiFi/SD card/SSD all functional and have L1
substates enabled insofar as they are supported by the device.
BRANCH=skyrim
Change-Id: Ib84df8b9d97282ae696414e52c4a65cfb0a81194
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This allows variants to override the skyrim port descriptors.
BUG=None
TEST=Tested with following patches
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8cff44f5b39d130a7191a69970cae8a88bb5d475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This fixes the case where a Broadwell CPU is combined with an AMD or
NVIDIA GPU would result in using the Broadwell GPU VBIOS file from CBFS
for the discrete GPU too. A further improvement would be to use a list
of the Intel iGPU PCI IDs like it is done in the Skylake code.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3eb50cb9a0539255d50e5cd8163f10c3a062cc4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73611
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This patch updates PMC API name from `pmc_send_pci_enum_done` to
`pmc_send_bios_reset_pci_enum_done` to inform PMC IPC about BIOS done
is also set along with PMC enumeration being done.
BUG=b:270942083
TEST=Able to build and boot google/rex.
Change-Id: I1cf8cb1ecadeb68c109be6b0e751a3f2c448ae4f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:272173189
TEST=run part_id_gen to generate SPD id
Change-Id: I141bda6eda3f658ca608c86ad0b320d018598514
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73554
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Decrease Touch i2c delay during power-on sequence from 300 ms to
150 ms to make S0ix resume time meet requirement.
BUG=b:264199989
TEST=Run the following test from chroot.
test_that -b {BOARD_NAME} {device IP} f:.*power_UiResume/control
Check seconds_system_resume value less than 500 msec
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ib81a9c1a90589b8b08e6ce6471db2abef96047ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73532
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the onboard Realtek NIC definition to a child device of
PCIe port 6. This makes sure it is advertised as "onboard", such that
it appears as eno0 on systemd/udev-based systems.
This commit is very similar to
https://review.coreboot.org/c/coreboot/+/73516
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The LOGICAL_CPUS Kconfig option is always true and also not user-
configurable, so it can be dropped.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4866de003058ec0f99495b405e26dfd7ba1fa28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Enable whiterun/winterhold platforms to send the fuse SPL (security
patch level) command to the PSP.
BUG=b:254568112
TEST=On a platform that supports SPL fusing, a message indicating
that fusing was requested will appear in the coreboot console log,
followed by a puff of smoke when the fuse is set and the message
"OK" again on the debug console. (Kidding about the smoke.)
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I45578597234ba672c89ac421b4626088faca27d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72914
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This adds checks for three more error bits before requesting that the
SPL fuses are updated.
- While I'm here, I'm adding the include of types.h which was previously
done through other include files, but should be done independently.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I87a7d40850c4e9ddbb2d1913c1588a919fdb29d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Use the presence of an SPL (Software Patch Level) file to trigger the
function that reads and writes the SPL fuses. The current Kconfig
option will be used to decide to write the fuses. This allows us to
see the state of the SPL update bit which determines whether or not
SPL fusing is allowed and needed before enabling the fusing.
- Refactor a bit to prepare for following changes.
- Update phrasing
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7bd2798b984673a4bd3c72f3cab52f1c9a786c67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Now that the code using the ACPI_SSDT_PSD_INDEPENDENT Kconfig symbol is
moved to soc/amd/common/block/acpi/cpu_power_state.c, also move the
Kconfig symbol to the Kconfig file in this directory.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide18111df38d4e9c81f7d183f49107f382385d85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce the get_cstate_io_base helper function that write_cstate_entry
can call directly to get the C state control IO base address instead of
having get_cstate_info pass this Io address to each write_cstate_entry
call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4cc80ded0a2fbc2dee9ca819e86284d9ffd58685
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The bit position of the P state enable bit in the 8 P state MSRs is
identical for all AMD chips including the family 16h model 30h APU that
lives outside of soc/amd. The other bits in those 8 MSRs are more or
less family- and model-specific.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Touchscreen signals were renamed for Rex schematics dated 21st Dec'22.
This CL fixes the comments for those signals.
BUG=b:263411413
TEST=None required (changed comments only)
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Ic40ef943d199d9f4a2bec9c0e6d4820224ef6adc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The implementations of get_pstate_info of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. The SoC-specific get_pstate_core_freq and
get_pstate_core_power functions remain in the SoC-specific code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe0494f1747f381a75b3dd71a8cc38fdc6dce042
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
With the exception of the generate_cppc_entries call, the
implementations of generate_cpu_entries of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. Since all SoCs that support CPPC already select the
SOC_AMD_COMMON_BLOCK_ACPI_CPPC Kconfig option, this can be used to only
call generate_cppc_entries for platforms where it is available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71323d9d071b6f9d82852479b60dc56c24f2b9ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Split the big PSP FW data into two parts, head and body. The head
needs to be located at original specific location. The body address is
more flexible. So the big body will not cover other needed FWs like
EC.
Give the body a specific named AMDFWBODY, which should be defined in
flashmap.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: Ia8b318f71632a2c9b97ce67486374dc24d23e63e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Instead of hoping that the default the C state control IO address in
binaryPI won't interfere with any other IO space usage in coreboot,
assign the ACPI_CSTATE_CONTROL value to the CStateIoBaseAddress platform
config structure element to make sure that binaryPI will use a known
address for the IO port based C state control. binaryPI will write this
address to the MSR_CSTATE_ADDRESS and will then also use these IO ports
in the _CST packages in the PSTATE SSDT, so changing this won't cause
a mismatch between those two.
The default CStateIoBaseAddress in the FT4 Stoneyridge binaryPI used on
Careena is 0x1770, so this didn't collide with any other IO space
registers, but it's still much better to tell binaryPI which exact IO
addresses to use.
TEST=On Careena MSR_CSTATE_ADDRESS now contains the ACPI_CSTATE_CONTROL
IO base address 0x420 and the PSTATE SSDT has the IO address 0x421 in
the _CST package entry for the second C state which are both the
expected values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I207202802427d4bf00f283bcbd83a174ab0a2846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The Realtek RTL8111E NIC is currently not defined as a child device,
resulting in the on_board flag not being set to 1. This means that
Linux / udev will call the device enp3s0 rather than eno0, as is
appropriate for on-board ethernet devices.
Additionally, the comment in devicetree.cb stating that PCIe port 6
is the ethernet controller is incorrect. It's actually port 4.
This patch moves the comment to the right port, and defines the NIC
as a child device of said port, so that it's properly defined as an
on-board device.
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/TFWNW3Y7IWTFD4KIBVNQYW3DODJ6SSC2/
Change-Id: Ie1e3a757a6bd6c7dd1702ced177d13711978dcc4
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73516
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5157fc031c5b19d8633132222520f582620208c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4f5743dd2e4dfdfeb3ffb2e9b964bdc75c84e6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3669c66094f0137081888ebdd1af838e2ea269b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id97fcb74ff3d48994a3181d9c31cbbeb5a76c60a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id6bd8879ce5968b24893b43041be98db55a4c3c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Instead of using a magic constant in the bit_offset field of the C state
resource for the C1 state that's entered via the MWAIT instruction, use
the existing ACPI_FFIXEDHW_CLASS_MWAIT define. This value is checked by
acpi_processor_ffh_cstate_probe in the Linux kernel.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9edc681efab15b5ceba91c8105f7dc6d687d8be8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce the get_cstate_info helper function that populates the caller-
provided cstate_values array with the data returned by the SoC-specific
get_cstate_config_data function. From the array get_cstate_config_data
returns, only the ctype, latency and power fields are used, so the rest
can be left uninitialized. Those 3 fields are compile-time constants.
For each entry, write_cstate_entry will generate the corresponding
resource information from the given data. In the C1 case where ctype is
1, the state is entered via a MWAIT instruction, while the higher C
states are entered by doing an IO read from a specific IO address. This
IO address is x - 1 bytes into the IO region starting at
MSR_CSTATE_ADDRESS for the Cx state. So for example C2 is entered by
reading from the C state IO base address + 1. This resource information
is generated during runtime, since the contents of MSR_CSTATE_ADDRESS
aren't necessarily known at compile-time.
MAX_CSTATE_COUNT is introduced so that the caller can allocate and pass
a buffer with space for the maximum number of C state entries. This
maximum number corresponds to the number of IO addresses the CPU traps
beginning from MSR_CSTATE_ADDRESS. In practice, it's unlikely that more
than 3 or maybe 4 C states will be available though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c36c1d604ced349c609882b9d9fe84d5f726a8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for lenovo boards: t400, t410, t420, t420s, t430,
t430s, t520, t530, x131e, x1_carbon_gen1, x60, x200, x201, x220, x230. A
0x2000 RW_NVRAM region is allocated for them, with the COREBOOT size
reduced by 0x2000.
Also remove the VBOOT_VBNV_OFFSET config, since it's only used for
VBOOT_VBNV_CMOS.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
BUG=b:235293589
TEST=./util/abuild/abuild -t LENOVO_T430S -a # with VBOOT enabled
Change-Id: I7e29db7eeceec499fbbcf902a26bfe9a2076de40
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
EC_HOST_EVENT_GPU was renamed from
EC_HOST_EVENT_USB_CHARGER and thought to no longer
be used. It was subsequently removed in
I9e3e0e9b45385766343489ae2d8fc43fb0954923
Add back the mask for this event as it is infact
required on certain Brya (Agah) and Hades variants.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
BUG=b:216485035,b:258126464,b:266631157
BRANCH=none
TEST=D-notifier events are received again from EC
Change-Id: I9d7bf52efa9572e1bbd2f307420e09a7398a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73217
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add SODIMM support, drop the solderdown based on schematics.
BUG=b:271199379
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I85ec79c3d8f1147a875c4d04017bb50347121ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Raptor Lake i9 CPUs have 8P+16E cores for a total of 32 threads.
Change-Id: I26a729a585e7dc14f38c9092056eb0280726f053
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73514
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The XHCI code does not currently contain a structure that corresponds
to the XHCI capability registers. These registers contain various
useful information about the controller. Create a`xhci_capability_regs`
struct to address this.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: If38bfde726bd4e5dd314456f25a2b08acd3cd20c
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Instead of having binaryPI generate a PSTATE SSDT that uses \_PR_ as the
scope for the CPU objects and patching this SSDT in coreboot to use the
\_SB_ scope in patch_ssdt_processor_scope, request binaryPI to use the
\_SB_ scope instead by setting the late platform configuration option
ProcessorScopeInSb to true.
TEST=Careena still boots and Linux doesn't show any ACPI errors with
this patch applied. With only patch_ssdt_processor_scope removed, but
the ProcessorScopeInSb option not set, Linux will complain that it can't
resolve the \PR.P00x symbols.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If88820a0f5df923f129e2e3b5335f5f0e38ee7f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This patch updates the print msg of mrc_cache size from hex to
decimal for easier understanding while debugging the issue.
TEST=Able to build and boot google/rex.
Without this patch:
[SPEW ] MRC cache found, size ee75
With this patch:
[SPEW ] MRC cache found, size 61045 bytes
Change-Id: I69feeb36423e47a5992c9f27d9a7042803a492cd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
It is necessary to increase the AVDD/AVEE of TPS65132s PMIC to +-5.7V
for powering on BOE_TV110C9M_LL0. So we set the default value to +-5.7V
and program the value to the EEPROM when configuring the display at the
first time. In this way, TPS65132s could load the correct setting from
the EEPROM after booting into kernel.
BUG=b:268292556
TEST=test firmware display pass and AVDD/AVEE is +-5.7V on Geralt.
Change-Id: I29236818444cac84d42386a371cd8934048ff948
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73443
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Move the sustained_power_limit_mW setting from the baseboard
to variants. This setting will be needed before STT is enabled,
but once STT is enabled, this setting should be removed.
BUG=b:265267957
BRANCH=none
TEST=Build/Boot to ChromeOS
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I7b9779600cfa8c7581732e936a714728fd618d20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I82c2016d9dfb39ff7b372815737d4ae62875340c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73373
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
To support an RPL SKU on taeko, taeko must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for taeko so that it will use the RPL
FSP headers for taeko.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot taeko to kernel.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Cq-Depend: chrome-internal:5544049, chromium:4302529
Change-Id: Ic97400555dabb237325e7c4a8d5edcbb4779cdb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This board is based off b75pro3-m, which is very similar. Compared to
it, it just lacks a COM1 header, and the secondary ASMedia SATA3
controller.
Tested with:
CPUs:
- Core i5-3330
- Core i5-3470
- Core i7-3770
RAM:
- single bank 4GB CL11
- two banks 4+4GB CL9
- two banks 8+8GB CL10
OS:
- Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72)
Working:
- GRUB2 payload with embedded default config for boot from USB, disk
- UEFI EDK2 payload
- Intel ME stripped
- Native raminit
- Integrated graphics with libgfxinit (HDMI, DVI and VGA)
- (boot from) SATA2, SATA3, ports
- Rear USB 2 and 3 ports (supports boot)
- Internal USB 3.0 ports
- Realtek GbE NIC
- 2.0 channel audio via lineout jack output
- ACPI (power button triggers OS event)
Untested:
- Internal USB 2.0 ports
- eSATA port
- 7.1 channel audio
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ia6a6eb3e922920f4afbcb7828cd2b779b9caebcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73097
Reviewed-by: Kevin Keijzer
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The legacy ACPI CPU control registers in IO space where the first 4 IO
locations control the CPU throttling value don't exist any more on the
Zen-based CPUs. Instead this IO address is written to MSR_CSTATE_ADDRESS
in set_cstate_io_addr which will cause accesses from the 8 IO addresses
beginning with ACPI_CSTATE_CONTROL to be trapped in the CPU core. Reads
from those IO addresses will cause the CPU to enter low C states.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c34e201cc0add1026edd7a97c70aa57f057782b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Finally figured out why ACPI_GPE0_BLK only being 4 bytes after
ACPI_CPU_CONTROL won't work and its due to the CPU trapping 8 IO
addresses from ACPI_CPU_CONTROL on for C state control. This is set up
in set_cstate_io_addr by writing the ACPI_CPU_CONTROL value into
MSR_CSTATE_ADDRESS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iedf53bbdae6ca65224601aad5cd1163df4b54131
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso and newer don't implement the P_CNT register to control the CPU
duty cycle and also trap the C state control IO addresses directly in
the CPU, so those won't reach the FCH. This register is unused in the
Picasso code and not even defined any more in the Cezanne PPR. The
Picasso PPR does define this register, but since it's useless and might
even just be a leftover form a pre-Zen CPU generation, drop the define.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3820db542c4714a100c7d36de673daa1a06e4a67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the duty_offset and duty_width FADT field in
acpi_fill_fadt for all SoC except Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib63b24891d44298841153dfc500b030619e1a5ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso neither has the corresponding P_CNT register implemented nor
writes a _PTC ACPI object that would specify the P_CNT register. The
Picasso UEFI reference code also sets the duty_width FADT entry to 0.
This also aligns the Picasso code with the Cezanne code in this regard.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I74645e5c4e54a2ad6bc7f9e72f5f656027a79860
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the pstate_cnt FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If3ddb466de1d437361d811e45e328a1dbff02fcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the mon_alrm FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabb5fc7367f1e4e7acea1a58abdb643fc46ca776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The ASRock B75 Pro3-M port was lacking a cmos.default and cmos.layout,
which means nvramtool could not be used to change any nvram values, and
the defaults were always being used.
I have "borrowed" the files from the similar h77pro4-m port, which
work fine for the b75pro3-m. I can now adjust things like gfx_uma_size
and power_on_after_fail, which are quite useful to be able to modify.
Additionally, this board did not have a data.vbt, so I extracted
vbt.bin from the VGABIOS and added it.
Change-Id: I40822f2f7b013b7ac0658d66d7972b447066d593
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73451
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
On the ASRock B75 Pro3-M, resuming from S3 has always been broken;
see commit 928c6c6336 (mainboard/asrock: add ASRock B75 Pro3-M).
This was because 3VSBSW# was not enabled during S3, causing the
board to reboot instead of resume. This change enables 3VSBSW#
during S3, which leads to S3 resume working normally.
Another issue with this board was that hardware monitoring was not
working. The nct6775 Linux kernel module could not be loaded, due to
the device having a base I/O port of 0. This change also enables the
Super I/O properly, so that sensors-detect can find the sensor and
the kernel module can be used.
Change-Id: I6e504fe4b60da1d7b9830bea5029101bb8cebcb5
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73450
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skyrim does not have a cardbus socket, so disable it.
Maybe cardbus support shouldn't be enabled by default?
BUG=None
TEST="PC Card (PCMCIA) is supported" no longer shows up
in dmidecode output.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic941b075e8b5082b5e61e728a77fd79c0ebba35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Only Frostflow supports the stylus, so remove the gpio-keys ACPI node
from Skyrim.
The Kconfig value DRIVERS_GENERIC_GPIO_KEYS is still enabled for all
Skyrim variants, since coreboot will drop the driver from the BIOS image
if there are no references to it (in the devicetree). If some other
design ends up using the stylus in the future we won't have to bring it
back.
BUG: none
TEST: build_packages --board=skyrim chromeos-bootimage --autosetgov
Change-Id: I9ffe215741b72b678d74405769f35167d8ded4b5
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Add a config "USE_NAU8318" to enable NAU8318 support.
NAU8318 is another speaker used in Geralt. NAU8318 supports beep
function via GPIO control. So we configure the GPIO pins and pass them
to the payload.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add a config "USE_MAX98390" to enable MAX98390 support.
MAX98390 is an I2S smart amplifier used in Geralt. It is also the
default speaker for Geralt reference board.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Enable bus protection for display to avoid bus hang and incomplete bus
transaction.
BUG=b:264204465
TEST=test firmware and kernel display pass for MIPI panel on geralt.
Change-Id: Iac61a69f2b84966dd468442daaa59d83eec775aa
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73411
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Bus protection is a HW mechanism to avoid bus hang and incomplete bus
transactions. Bus protection HW must be enabled while the receiver of
the transaction is not able to respond.
BUG=b:264204465
TEST=build pass
Change-Id: I14aa63c4934073a14552cef64f40657d0197bbe1
Signed-off-by: garmin chang <garmin.chang@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73375
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The XHCI device functions currently use functions that require a
access to the device tree. Create variant of these functions that can
operate with a resource* as an argument and refactor the existing
device*-based functions to operate by calling the resource*-based
variants. This is useful for stages like SMM that may not have access to
the device tree.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on skyrim device, verified that XHCI ACPI tables are still
generated correctly.
Change-Id: If5a74f9529d5dc6031ec968ef5f40a9cad5ffbc4
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
In certain cases data within protected memmory areas like SMRAM could
be leaked or modified if an attacker remaps PCI BARs to point within
that area. Add support to the existing SMM runtime to allow storing
PCI resources in SMRAM and then later retrieving them.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I23fb1e935dd1b89f1cc5c834cc2025f0fe5fda37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
According to thermal_table_0215, adjust DPTC and STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Id7df3f9bfa3f0e1337c502bc7db9e09e12cd956a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73081
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add stt settings for dptc tablet mode.
BUG=b:257149501
BRANCH=None
TEST=Check if the STT value matches the clamshell/tablet mode.
Run the WebGL aquarium with 5000 fish and verify that there is
no power drop peak.
Change-Id: Ib4aad3af8761b20084717b15a462edf4704b83cc
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73205
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
The SPL parameter for DPTC settings is not available for STT-enabled
platforms. It needs to be removed to avoid confusing STT calculations.
BUG=b:265267957
BRANCH=none
TEST=Run the WebGL aquarium with 5000 fish and verify that
there are no power drop peaks.
Change-Id: I8e6dad7d24883f8aadce83ebac401ecd4137d61a
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
On platforms with more than 255 cores the ACPI CPU string
would overflow and generate duplicates. Fix that by changing
the string to hex and use 3 digits.
Test:
Able to boot without ACPI errors on IBM/SBP1 which has
384 actives cores.
Change-Id: I1887928da0c049c27e2ec129f49051b24048b33b
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
oryp10 is nearly identical to the oryp9, with the differences being:
- Uses DDR5 RAM instead of DDR4 RAM
- Uses Realtek ALC1306 instead of TI TAS5825M
- Has an option for OLED display
Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Fixes detection of the on-board RAM (Samsung K4AAG165WA-BCWE) on the
System76 Lemur Pro 11 (lemp11).
Change-Id: Ibe56c0f2b81d660303429cd2e21a7bb6cd433da5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
BUG=b:230398487
BRANCH=none
TEST=Verify USB-A device could wake up Moli.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I1c8daf62dabe674a39b1416d886f9e470ae23a5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73174
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Align support for enable wake-on-usb attach/detach as was
introduced in Cannon Lake in commit 811284125f
("soc/intel/cannonlake: Add UWES ASL into xhci.asl").
This adds the USB Wake Enable Setup (UWES) ASL blocks
required to inform the OS about plug wake events bits
being set in the PORTSCN register configured by devicetree.
BUG=b:230398487
BRANCH=none
TEST=Verify USB-A device could wake up Moli.
Signed-off-by: Scott Chao <Scott_Chao@wistron.com>
Change-Id: Icbc427a89413f5fe3a4a533135cc2c39349a9580
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73173
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Used by default for all boards with TPM2 which don't specify log
format explicitly.
Change-Id: I0fac386bebab1b7104378ae3424957c6497e84e1
Ticket: https://ticket.coreboot.org/issues/422
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Used by default for all boards with TPM1 which don't specify log format
explicitly.
Ticket: https://ticket.coreboot.org/issues/423
Change-Id: I89720615a75573d44dd0a39ad3d7faa78f125843
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add custom backlight levels for all models except:
- addw1/addw2: Uses an OLED display
- bonw14: Does not use the iGPU
Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Do not reconfigured LSX0 so that the FSP values are used.
Change-Id: I7ef4af2cde4f3260f2bc2efdbf85569b0eb147fb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Move the implementation of smbios_system_wakeup_type from the mainboards
to the EC for all models that use System76 EC (everything except KBL).
Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The skolas baseboard is no longer needed, so this change removes the
baseboard files for skolas and adjusts the config settings to that
variants that used to select BOARD_GOOGLE_BASEBOARD_SKOLAS now
select BOARD_GOOGLE_BASEBOARD_BRYA and SOC_INTEL_RAPTORLAKE.
BUG=b:271470530
TEST="emerge-brya coreboot chromeos-bootimage", flash image-skolas.bin
onto a skolas and verify it boots to kernel.
Change-Id: I34cae7e471851aa52a64ce3af7bb506dc67f806b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Phoenix' implementation of map_oprom_vendev uses this simplified
implementation, so port this back to Cezanne too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0aa3a0fed37c6cba15a668ada639f5fd0c212d2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73387
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is causing some issues, so disable it until those issues can be
resolved.
BUG=b:271437658, b:271199389, b:270077971
TEST=Screen always lights up on boot & after S0i3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id4aa441e4b4f76168f8243b6abafa1cf1ea08dbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
On the 4 socket IBM/SBP1 platform with 384 cores lots
of space for ACPI tables is required.
Bump MAX_ACPI_TABLE_SIZE_KB to 400 to fix CBMEM corruption.
Change-Id: Ifbd79e84097231b41f900425a2e8750dce71a25a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh Solanki <naresh.solanki.2011@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
As discused earlier, the callback name 'mb_adjust_cfg' was considered
too generic. The new naming is chosen to be consistent with other
drivers' callback names designed to be used at mainboard level.
Also other functions, namely 'mb_get_edid' and 'mb_select_edid_table'
are renamed accordingly.
BUG=none
TEST=Builds for siemens/mc_apl{1,4,5,7} and siemens/mc_ehl boards
complete successfully.
Change-Id: I4cbec0e72e5f03e94df0faa36765d1a6cd873a7a
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch adds base code for the Protectli VP2420. The GPIO
config has been extracted with inteltool from the stock
firmware and then parsed with intelp2m. As of now, the platform
runs with edk2 with no apparent issues.
Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com>
Signed-off-by: Artur Kowalski <artur.kowalski@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: Ia00c27117d48b76db306d3f988f159fc5d50e4a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
CXL (Compute Express Link) [1] is a cache-coherent interconnect
standard for processors, memory expansion and accelerators.
CXL memory is provided through CXL device which is connected
through CXL/PCIe link, while regular system memory is provided
through DIMMs plugged into DIMM slots which are connected to
memory controllers of processor.
With CXL memory, the server's memory capacity is increased.
CXL memory is in its own NUMA domain, with longer latency
and added bandwidth, comparing to regular system memory.
Host firmware may present CXL memory as specific purpose memory.
Linux kernel dax driver provides direct access to such differentiated
memory. In particular, hmem dax driver provides direct access to
specific purpose memory.
Specific purpose memory needs to be represented in e820 table as
soft reserved, as described in [2].
Add IORESOURCE_SOFT_RESERVE resource property to indicate (memory)
resource that needs to be soft reserved.
Add soft_reserved_ram_resource macro to allow soc/mb code to add
memory resource as soft reserved.
[1] https://www.computeexpresslink.org/
[2] https://web.archive.org/web/20230130233752/https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.32&id=262b45ae3ab4bf8e2caf1fcfd0d8307897519630
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ie70795bcb8c97e9dd5fb772adc060e1606f9bab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52585
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
BUG=b:270529665
TEST=Verify the build and boot on Rex board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I0e3d3312c546a2a468fb906a08b8d3ec3e96c46a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
To support 32M flash, the non-vboot also need to split amdfw.
The amdfw.rom is the default filename added to CBFS.
Keep the default filename and then we don't have to change all the
CBFS definition.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: Id77b11422d4549cf57a1cd8980c7a9cf3597d1bc
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Hook up microcode from 3rdparty repo for:
- 06-b7-01 (CPUID signature: 0xb0671)
Verified microcode blob was in CBFS on Clevo PD50SNE (system76/serw13),
which has an i9-13900HX.
Change-Id: If91ff9233a5e1dd1db76edf33a76c55f5dddc9b4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Enable the PchHdaAudioLinkHdaEnable UPD so that the sound works.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie3493af340a42035ee537d83b1542be1b87d8f9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Handle the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE.
Previously, the EC sent the host event EC_HOST_EVENT_MODE_CHANGE when
body detection changed between lap/desk mode. However, that event is a
wake event, which resulted in spurious AP wake events being triggered
when the EC detected lap/desk mode changes while the AP was suspended.
To resolve this, the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE was
added, which will not be a wake event. This CL adds handling for the new
event to acpi/ec.asl to switch DPTC tables when a change is detected.
BRANCH=none
BUG=b:261141172
TEST=bodydetectmode on|off, verify host event is received
Change-Id: Iabeb7891489a209f45504804355f1fa817082976
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73298
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
There were two wrong comments in all mc_ehl gpio.c files. This patch
corrects the incorrect comments.
Change-Id: Iea356db177227d89b91be32a4e2367c612b77350
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72458
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This mainboard does not use security features like TPM.
Change-Id: Ieebbf12fc844573ffadb089da78062dd2033517a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The upcoming mc_ehl4 variant is the first Siemens Elkhart Lake mainboard
without a TPM. For this reason, the corresponding Kconfig switches must
be moved to variant level. To prevent Jenkins build from complaining,
the TPM is removed in the following patch.
Change-Id: Ic73ccd1b52e57c1cf1dd7337b0e28beaadbece8e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Measurements have shown that the automatic calibrated values for RGMII
output impedances are too low. For this reason, set the PMOS value to 16
and the NMOS to 13.
Change-Id: Ic3382889d3281faccb03819f9680a9763703b2a1
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73019
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the configuration of Marvell PHY 88E1512 is finished, then switch
the page back to 0 only once at the end of the Init function.
Change-Id: I9e516870a7c5928724df2bd3ac9c5c8f3249af2e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73017
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This mainboard is based on mc_ehl1. In a first step, it contains a copy
of mc_ehl1 directory with minimum changes. Special adaptations for
mc_ehl4 mainboard will follow in separate commits.
Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The commit fcff39f0ea ("vc/siemens/hwilib: Rename 'maxlen' to
'dstsize'") changed the 'dstsize' input parameter type from uint32_t to
size_t.
This patch changes also the return parameter, which is often directly
compared with the aforementioned input parameter value. This should
introduce no change on 32-bit builds and stay consistent across the
project in the case of 64-bit builds and avoid comparisons of integers
of different width here.
BUG=none
TEST=No changes to hwilib behavior on any of the siemens/mc_apl1 or
siemens/mc_ehl variants.
Change-Id: I0a623f55b596297cdb6e17232828b9536c9a43e6
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Add a new parameter STT_ALPHA_APU' for each DPTC mode.
BUG=b:257149501
BRANCH=None
TEST=Check if the STT value matches the expected setting.
Change-Id: Ib27572712d57585f66030d9e927896a8249e97a7
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
With the latest hardware revision, the two GPIOs GPP_B15 and GPP_E19 are
no longer connected to a native function.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: I266612f041b749aa83b366497b4211fc075c7bd7
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The Common Clock Configuration (CCC) is a PCIe feature for cases where
the upstream and downstream device of a link share the same reference
clock. After a change in this setting a link re-training is mandatory
to make it effective.
On recent Intel platforms (tested on Elkhart Lake) the FSP code which is
executed before coreboot performs the PCI scan already enumerates all
PCI buses for its internal uses. While this is done, all the PCI express
features of a link are configured, which includes CCC. If the link
supports common clock, FSP performs the link re-training already. When the
execution flow is returned to coreboot, the same link treatment is
applied again (coded in 'pciexp_tune_dev()') and CCC is enabled a second
time, just a few milliseconds after FSP did this already.
Because enabling CCC requires a link re-training, there are two link
re-trainings on the PCIe link within a few milliseconds (one from the FSP
code and one from coreboot) which can lead to issues with a connected
PCIe device on this link. In particular, link issues were discovered
with a Pericom PCIe switch (PI7C9X2G608) on mc_ehl1 where the link has
stalled for a while after the second re-training. This in turn leads to
non-initialized PCI devices on the bus after coreboot has finished.
This patch checks if CCC is already enabled on a link and does not
perform the steps to enable it again in coreboot which safes a link
re-training (and thus execution time) and a potential link stability
issue.
Test=Check log output on mc_ehl1 which shows the following lines:
[DEBUG] PCI: pci_scan_bus for bus 09
[DEBUG] PCI: 09:00.0 [8086/1533] enabled
[INFO ] PCIe: Common Clock Configuration already enabled
Change-Id: I747fa406a120a215de189d7252f160c8ea2e3716
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73310
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 3 (0011)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id0925ccec014c9c535178ed3d908e60889df624d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
H58G56BK7BX068 1 (0001)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9eea7e277628992be9b7768a678a50425444002a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The DRAM scramble feature enhances DRAM data protection. When it's
enabled, the written DRAM data will be scrambled and hence can prevent
the data from being hacked.
This feature would make debugging more difficult (for example ramoops
would be lost after reset). Therefore, add a new config to allow
enabling or disabling the feature from coreboot, without having to
maintain two versions of the DRAM calibration blob.
BUG=b:269049451
TEST=build pass and check scramble enable or disable successfully
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ib4279bc1cc960fae9c9f5da39f4448a5627288d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I1e68f708b7740567e24f8a3ddb9832aeec7ee6b5
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73247
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The DC boost bit was intended to be in the Controller Params word rather
than its own byte. Correct this error.
BUG=b:214581372
TEST=build
Change-Id: Ie65e57a351f0fc1f0c80ef320fd87043ee22916c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Server platform doesn't have S4 state so select DISABLE_ACPI_HIBERNATE
to remove S4 state from available sleepstates.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ie5ddb1a98cd5bbd854b915c93694d1ebcb9bddd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
The currently used panel type could work with 500 ms but increasing
the value to 1 second allows to use a wider range of LVDS LCD panels,
as many of them specify the delay of 1 s as minimum.
BUG=none
TEST=Test link stability using a panel with minimum re-power delay of
1 s.
Change-Id: I2dd86e791c1212b67a80d7e6cfc474ad91b26c6b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The comment that the PchHdaAudioLink UPDs only configure GPIOs is
incorrect. Setting this GPIO to 1 or 0 will not change the HDA
GPIO configuration; it will make the sound work when set to 1,
or not work when set to 0.
Remove the incorrect comment and make the UPD configurable from the
devicetree.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6f27f41a4a4b3844a65d45d36aba37c3af1050a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Replace the SOC_INTEL_TIGERLAKE_S3 and SOC_INTEL_ALDERLAKE_S3 with
the D3COLD_SUPPORT symbol, as it allows for more granular control.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I07e8c84e5ad8f390bfbac017dd23736e7a6ced9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Instead of adding the P-state number to the PSTATE_0_MSR number to get
the P-state MSR number for the rdmsr call, provide a macro that directly
calculates the MSR number for a given power state. Also drop the unused
PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs
available in the hardware.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The latency values in the _CST package override the values in the
p_lvl2_lat and p_lvl3_lat FADT fields. In Picasso, Cezanne, Mendocino,
Phoenix and Glinda generate_cpu_entries generates the _CST packages for
each CPU device. The coreboot code for Stoneyridge doesn't generate _CST
packages for the CPU objects, but those are provided via the PSTATE SSDT
binaryPI generates and agesa_write_acpi_tables gets and adds to the ACPI
tables. The AGESA reference code also sets those two FADT entries to the
equivalents of ACPI_FADT_C2_NOT_SUPPORTED and ACPI_FADT_C3_NOT_SUPPORTED
so this also matches the AGESA behavior.
From the ACPI 6.4 spec: "Values provided by the _CST object override
P_LVLx values in P_BLK and P_LVLx_LAT values in the FADT."
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1116a3013576b18b6f521604d6b0a9d75b971e0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Use the ACPI_SCI_IRQ definition for both the PIC and APIC IRQ number in
the fch_irq_map table. Before the PIC mapping was set to PIRQ_NC, but
both mb/google/kahlee and the other amd mainboards using newer SoCs set
both the PIC and APCI IRQ number to ACPI_SCI_IRQ, so change this here to
match the other mainboards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I29dde7ca8d2ecf00d8174c2d793ef1ad55ae3e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73322
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the ACPI_SCI_IRQ definition instead of a magic value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia860668b5c93b1b8882459d9f983cf3a23d16392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73321
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IRQ9 is used as ACPI SCI IRQ, so add a define for that and use it in the
code like it is also done in the other SoCs in soc/amd.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iddb51d70c15ab1d7088f62b61e22510bd1b30b1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73320
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since there's a define for the ACPI_SCI_IRQ 9, use the define instead of
a magic number in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c8f62929f3f66192698e10826d10329ef3d8cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73319
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the res2 FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa69ae61bea82acf66e7210c4103ef48e36dbdd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73318
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use enum cb_err to return an error/success state instead of an int in
get_nv_rdev and get_nv_rdev_rw.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73706a93bc1dbc8556e11885faf7f486c468bea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73317
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The bool type is used although stdbool.h isn't included. Include types.h
which will include both stdint.h and stdbool.h
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5213ddae3ceb36e0b2e09f8ef3f7f414ebdf187f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73316
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The directory holds boards other than ADL-P, such as ADL-U and ADL-H.
Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or
overridden by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Port of commit a182faeb88 ("soc/intel/alderlake: Hook up FSP hyper-threading setting to option API")
Change-Id: I0b3e1a4049312c6b1ec950382c92274e0350001f
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Fix typo in the comment for Common Clock Configuration.
Change-Id: Idd01e787458a9090d53b9a57547b8158480dcc16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Enable HAS_RECOVERY_MRC_CACHE config and add RECOVERY_MRC_CACHE FMAP
section to cache the MRC training data in recovery mode.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the appropriate MRC_CACHE FMAP
section.
Change-Id: I3f0f41c20b61c96473e887521f84f3ad240adc2b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Use fw_config to probe fingerprint.
BUG=b:269986245
TEST=emerge-skyrim coreboot chromeos-bootimage. Test result is pass
with 1000 reboot cycles.
Change-Id: I4b4bca42dd78dfd5b8636ff3cb05406d2d0c94f7
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
To support an RPL SKU on osiris, osiris must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for osiris so that it will use the RPL
FSP headers for osiris.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot osiris to kernel.
Cq-Depend: chromium:4290627, chrome-internal:5516851
Change-Id: If8de42a82fd85ffa8b9836e6024f119bc798f4fc
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
It's sufficient to generate CPU devices for all available CPU cores/
threads instead of for the maximum number of possible CPU cores/threads.
TEST=google/careena with 2 cores still boots and Linux doesn't complain
about ACPI errors due to referenced but not present CPU objects.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6850edfa305304060092cb5480f4296f4f5ddacc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
On boards with RECOVERY_MRC_CACHE FMAP section, populate type 0x63 BIOS
directory entry in RO with that section. If the RECOVERY_MRC_CACHE
section is not present, then fall back to RW_MRC_CACHE.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the base and size of appropriate MRC
cache.
Change-Id: I49ec4f64e33c4d5780a7fe6a5540eab42b6cec9f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
If a mainboard has RECOVERY_MRC_CACHE and the recovery mode is enabled,
then use APOB data from that section and make any updates to that
section. Otherwise continue to use DEFAULT_MRC_CACHE section.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim.
When in normal mode, DEFAULT_MRC_CACHE is used.
Normal Mode Boot1:
------------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[INFO ] APOB RAM hash differs from flash
[SPEW ] Copy APOB from RAM 0x02001000/0x1db18 to flash 0x0/0x1e000
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] SF: Successfully erased 122880 bytes @ 0x0
[INFO ] Updated APOB in flash
Normal Mode Boot2:
-----------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] APOB hash matches flash
When the device is in recovery mode, RECOVERY_MRC_CACHE is used.
Recovery Mode Boot1:
--------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[INFO ] APOB RAM hash differs from flash
[SPEW ] Copy APOB from RAM 0x02001000/0x1db18 to flash 0x650000/0x1e000
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] SF: Successfully erased 122880 bytes @ 0x650000
[INFO ] Updated APOB in flash
Recovery Mode Boot2:
--------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] APOB hash matches flash
Switch from Recovery Mode to Normal Mode:
-----------------------------------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] APOB hash matches flash
Switch from Normal Mode to Recovery Mode:
-----------------------------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] APOB hash matches flash
Change-Id: I93f357e407c98b6e5fca495f4f779fad54a3430f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This commit separates setting FSP debug params from the rest of code and
configures FSP serial port parameters. Other ports (0x3E8 and 0x2E8)
are omitted since Elkhart Lake FSP only supports 0x3F8 and 0x2F8.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I84f7c19a7c2fd5a4db18f5a37e1c667da017aace
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Remove world-facing microphone for xivu360.
Switching to world-facing camera will use the
user-facing microphone to record sound.
BUG=b:263927799
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ibb720974b6488ce4453081e0bc5b4e7f34a6b0f6
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
BUG=b:269786649
TEST=build and test USB2 port function works fine
BRANCH=dedede
Change-Id: I63928a0d8ce6b2365250fd96572f4a2db948c19d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
To support an RPL SKU on constitution, it must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for constitution so that it will use the RPL
FSP headers.
BUG=b:267539938
TEST=emerge-brask intel-rplfsp coreboot
coreboot-private-files-baseboard-brya
Change-Id: Ie4f5eb6ebb372ad07308ff25c9eb69a83793c656
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73246
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove `fixme` from gpio.h since it has been addressed.
BUG=none
TEST=Only a cosmetic change
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I79a2493dba6becd4b8c1ebf37e452a5a173eb396
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Update ec_commands.h from the EC repo at:
"8441cf4 Add host event: EC_HOST_EVENT_BODY_DETECT_CHANGE"
This is an exact copy of the EC repo's ec_commands.h with the
exception of updating the copyright message.
BUG=b:261141172
BRANCH=none
TEST=built coreboot for skyrim
Change-Id: I9892c0c3518f63d357459861e8fa1b7f5f494e68
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Because the ChromeOS boards don't fill a manufacturer in for the memory
SPDs, that information isn't available from the FSP. We can get the
Manufacturer ID based on the memory name from CBI instead. Use this
information to fill in an ID so that the manufacturer name is available
in the SMBIOS information.
BUG=None
TEST=Look at dmidecode output
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I810c3191180dd3b566d7ea64006f29b625b10526
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
There is a Nanya device used on one of the Google Guybrush devices,
so add it to the list of SPD manufacturer names.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia449f4d14385cdd5a2548e2a05e3928ea3602c12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The DMI error correction type was not being filled in, so was reporting
as "Error Correction Type: <OUT OF SPEC>". This patch fixes that.
Since it's now filling in information for both Type 16 & 17, rename
the function to reflect that.
BUG=None
TEST=dmidecode now reports the type correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6b51612d808c63de1acd2be952cb6c152f8a1be5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
SimNow does not support the Birman EC, so skip the EC configuration
steps when building for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6e879a13a119d593674d3403d4e1b32e0e244d9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add option for mainboards to target builds for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id765437b69f1bc3a9f9d7858edcd27e687d5a7f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move 'asmlinkage' before the function type for consistency.
Change-Id: I293590ef917b78c6ed3d151cd0080e42d0f10651
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73259
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch optimizes CPU MP Init related configs being used within
multiple SoC directory and moving essential configs into common code
to let the SoC user to choose as per the requirement.
TEST=Able to build and boot google/kano and google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I12adcc04e84244656a0d2dcf97607bd036320887
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
This reverts commit 363202b435.
Reason for revert: Seeing some bit flips on the SPI bus, but cannot
repro reliably on local builds. Going to downgrade back to 50 MHz
to see if builder builds are more stable on each variant as a result.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I4fe76bac915e3b3c794821cd160a66824e38ea83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73214
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
MT62F1G32D2DS-026 WT:B 2 (0010)
H9JCNNNBK3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 3 (0011)
BUG=b:265190498
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I860f10552e4e4180e09ab805ca82b108fdc8f21a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73049
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 3eb17b91da.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: If4277cb600bfe4e071959dacaf204fe7d3518f68
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73202
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This reverts commit 0e0f9e51c4.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: I13b93747bdb4d39de1ffcfdc020648871fa6e048
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73203
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Elkhartlake based SoCs uses Intel's Management Engine (ME), version 15.
This patch selects ME 15 specification defined at common code and
removes elkhartlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I3186f509c63b3a892c72cb1fa08fc094735d6eeb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73245
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Alderlake based SoCs uses Intel's Management Engine (ME), version 16.
This patch selects ME 16 specification defined at common code and
removes alderlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib94e4662c735b1c31c8dfca1cfa881e6fa4070fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73244
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Cannonlake based SoCs uses Intel's Management Engine (ME), version 12.
This patch selects ME 12 specification defined at common code and
removes cannonlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ifc64cf63736bb730492b1732a22669a0415816a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasperlake based SoCs uses Intel's Management Engine (ME), version 13.
This patch selects ME 13 specification defined at common code and
removes jasperlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Icf4bc651e94d6ec977ed8f2381d7184337dc1ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73139
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tigerlake based SoCs uses Intel's Management Engine (ME), version 15.
This patch selects ME 15 specification defined at common code and
removes tigerlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: If4fbfd7c591794ed945c1e9e8487a9e9723c7551
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73138
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Meteorlake based SoCs uses Intel's Management Engine (ME), version 18.
This patch selects ME 18 specification defined at common code and
removes meteorlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I36ee66f94f0c37ab6a134e79e49da9abc83b93cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73137
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch adds ME specific source code at common location in order to
reduce maintenance efforts at SoC level and improve readability. The
functionality and code are redundant for various SoC platforms and
require more maintenance.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic6622662fd3b8bcc9d9ac8bd6ffa732f5d78801a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73133
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch includes ME specification datastructures for various ME
versions. Including the ME specification in common code will help
current and future SoC platforms to select the correct version based on
the applicable configuration. It might be also beneficial if two
different SoC platforms would like to use the same ME specification and
not necessarily share the same SoC directory.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I83df41d7180d2df419849a0c01c728ff0fe75378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73129
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch includes ME specification configuration for various versions,
which will allow SoCs to get ME support by selecting the correct
version.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I817d14e52b0d353bbb4316d6362fcb80cbec3cda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73128
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Rather than explicitly checking for Recovery or Developer mode via
vboot, use display_init_required() so that vboot is not required, and
other instances where the display is needed pre-OS (such as when
applying a critical system update) are covered as well.
With this change, SoCs implementing selective GOP init will need to
select VBOOT_MUST_REQUEST_DISPLAY in order for display_init_required()
to not assert on compilation.
BUG=b:255812886
TEST=build/boot skyrim
Change-Id: Iac7e06863764a9f21c8a50fc19050cb5a6627df2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Rather than explicitly checking for Recovery or Developer mode via
vboot, use display_init_required() so that vboot is not required, and
other instances where the display is needed pre-OS (such as when
applying a critical system update) are covered as well.
Select VBOOT_MUST_REQUEST_DISPLAY in order for display_init_required()
to function properly (and not assert on compilation).
BUG=b:255812886
TEST=build/boot skyrim
Change-Id: If2fee71bcc11468fd2db0abaafe4ea35e2953993
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The headers added are generated as per FSP v4031.01
BUG=b:270416522
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Cq-Depend: chrome-internal:5513169, chrome-internal:5511170
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ia21807ee71c98489fd96f870c2d61f54e094c3d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Define some actions based on probe results for audio:
- Disable the SoundWire GPIOs when I2S option is selected.
- Disable the I2S GPIOs when SoundWire option is selected.
- Disable all the GPIOs when no audio is enabled.
BUG=b:269497731
TEST=Test that GPIOs are configured based on the current
value of the fw_config field in cbi.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0ed452a0d08e6779add318d9bbd1e97b50b6aea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
In order to improve gpio merge mechanism. Change iteration override
to padbased table override. And the following patch will change fw
config override with ramstage gpio table override.
Port of commit 7aef2b1294 ("mb/google/nissa: Apply gpio padbased
table override")
BUG=none
TEST=Verify devbeep at depthcharge console
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2ee86bbec7d25a35d726f29ad79891f1054bf52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73182
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The reset bit mapping was incorrectly assigned to GPIO groups. The
reset mapping for Community 0 actually reflects the GPD reset mapping.
Change the Community 0 reset mapping to the correct default map and fix
the GPD reset mapping.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2b9d093ca7ea0f5087f49671ca457c0b45927918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control
the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always disabled
for RPL & ADL-N based ChromeOS platforms.
It is not disabled for ADL-P based platforms because ADL-P FSP relies
on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit
sync doesn't occur if no MBP HOB, so it results S0ix issue. This
limitation is addressed in the later platforms so creation of MBP HOB
can be skipped for ADL-N and RPL based platforms.
This made skip_mbp_hob SOC chip config variable redundant which is also
removed as part of this change.
BUG=none
TEST=Build and boot to Google/Taniks.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
In the current Kconfig option MEDIATEK_BLOB_FAST_INIT, the meaning of
"BLOB" is unclear. Add "DRAM" to the name.
BUG=b:204226005
TEST=./util/abuild/abuild -t GOOGLE_STEELIX -x
Change-Id: Ida7bda770f1d1a40cae205b08c8cb22f2329e49f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73155
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MX98357A is not a soundwire codec, so move it out of
drivers/intel/soundwire node.
BUG=none
TEST=Build and boot MTL-P RVP to Chrome OS. Verify I2S audio card
enumeration and no max98357a entry under /sys/bus/soundwire/devices.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I24fc7084ea18445c341eed012cfacde8de126fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
This reverts commit 272c9c07bd.
Reason for revert: Sorry was going to give +2 but pressed the submit
button and accidentally merged this out of train.
Change-Id: I8a2c6407832bdcf3d475209356501f8fc3672f6b
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73213
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Alderlake based SoCs uses Intel's Management Engine (ME), version 16.
This patch selects ME 16 specification defined at common code and
removes alderlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I94cb8a9cbb6167d1a11a012efbd6a135a8692969
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73135
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes MP init on xeon_sp SoCs which was broken by 69cd729 (mb/*:
Remove lapic from devicetree).
Alderlake cpu code was linked in romstage but unused so drop it.
Change-Id: Ia822468a6f15565b97e57612a294a0b80b45b932
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Use the existing IO_APIC2_ADDR definition instead of a magic value.
TEST=Timeless build results in identical image for pcengines/apu2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7ee039e23309fdae0d614bb1fb0610d82564bf3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The coreboot-common acpi_create_fadt writes a pointer to the FACS table
into both firmware_ctrl and x_firmware_ctl_l FADT fields and sets
x_firmware_ctl_h to zero. When x_firmware_ctl_[l,h] is non-zero, the
pointer in firmware_ctrl will be ignored, but that's what is already
done on Cezanne and newer.
TEST=Linux doesn't complain about any new ACPI problem on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9eab4dcf828f28a60c6312ec96872aac4cfb266
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the ARM_boot_arch FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id2d24a9b8d5b04271eb4da6a622b5bba66dbc501
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73188
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the ARM_boot_arch FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ica968db1228a2d63e83f2b6c4ea57c5f02bf1504
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73187
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate
when the state of charge drops to low_battery_shutdown_percent.
BUG=b:255465618
TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898)
Verify system resumes from s0ix and then enter S5 on nivviks with steps:
1. disconnect AC
2. powerd_dbus_suspend --disable_dark_resume=false
3. fakebatt 5
4. fakebatt 4
Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9
Signed-off-by: Ivan Chen <yulunchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Add common device tree used for EGS platform. Also add register
setting shared for all EGS platform.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I812f621ee9d1643fd4fa35df92443d64f7aaabc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The current clock register definition is wrong, which results in wrong
audio sampling rate. Fix it by adjusting the POSTDIV registers of
APLL1-APLL5.
TEST=build pass
BUG=b:250459803, b:250464574
Change-Id: I7a627169593f41906856777d738c6b13ff72d5a0
Signed-off-by: Johnson Wang <johnson.wang@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73134
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
MT8188 supports port0/port1 download. The hardware needs a trapping pin
to select the port to use. When port1 is selected, the phy of port1 will
be switched to port0. That is, port1 connector will be the physical line
of port0. Since port0 phy isn't initialized in coreboot, switch back to
port1 phy.
BUG=b:269059211
TEST=can detect USB2 devices in depthcharge.
Change-Id: Ic97d0bd9d0233883196b2e73ac2a22cd8ea9466b
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the
port.
BUG=b:269690930
TEST=kernel can detect a PL2303 USB device
BRANCH=dedede
Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Add functionality such that the FPMCU is power cycled long enough
on boot to ensure proper reset.
This solution relies solely on coreboot to sequence the power and reset
signals appropriately (150ms on boot).
BUG=b:245954151
TEST=Confirmed FPMCU is still functional on Nami.
Confirmed power is off for 150ms seconds on boot.
Confirmed RCC_CSR of FPMCU indicates power cycle occurred.
Confirmed reset is de-asserted approx 3ms after power application
(target >2.5ms)
Change-Id: I21eb85dc11e0ea0eb5de8a6092b01663d3c3df91
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68820
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Phoenix2 VBIOS PCI DID is 15c8 though the VBIOS image uses a different
PCI ID i.e. 0x1205, so we need to implement map_oprom_vendev for the SoC.
Change-Id: I7eef5eb41b781f02abb9dd4098e92a8652a431f5
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
VGA defineds the extended ASCII set based on CP437, but there is a bug
on printing them: in vga_write_at_offset(), we perform a bitwise or
between 'unsigned short' and 'signed char':
```
p[i] = 0x0F00 | string[i];
```
If we want to show an extended ASCII character, string[i] will be
negative and this bitwise operation will fail due to their implicit
casting rule: convert signed char to unsigned short by adding 65536.
To fix this, we need to cast the string to unsigned char manually
somewhere. Since we still want to leverage the built-in string utilities
which only accepts const char*, we still preserve the original
prototypes before, and cast it until we write into the frame buffer.
BRANCH=brya
BUG=b:264666392
TEST=emerge-brya coreboot chromeos-bootimage
and verify drawing characters with code > 127.
Change-Id: I9cd65fe9794e5b0d338147924f28efd27fc8a1e8
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Based on product spec v1.4, update T3 timing from 180 ms to 150 ms.
BRANCH=none
BUG=b:262734395
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0d8f1e008276fccdfbb8c76cfebaccbe71160b64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73130
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
After first recovery request coreboot would get stuck in bootloop with
VB2_RECOVERY_PREAMBLE as recovery reason due to not checking whether
coreboot is alread in recovery mode, and calling failing code.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Idc947a1d150ff6487cf973b36bf4f0af41daa220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Package C state demotion is now disabled for all RPL SoCs from within
soc/intel/alderlake/fsp_params, so no need to duplicate that in the
skolas devicetree.cb.
BUG=268296760
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The EFS entry at offset 0x14 can point to either the first level PSP
directory table or to the PSP combo directory structure that was used
before the introduction of the AMD A/B recovery scheme. This scheme is
not to be confused with the VBOOT scheme. The PSP verstage code checks
if the header this entry points to begins with the PSP_COOKIE, which
indicates the entry is a first level PSP directory table. Due to that,
the EFS entry at offset 0x14 is always expected to point to a PSP
directory table, so rename combo_psp_directory to new_psp_directory to
match the actual usage. This EFS entry that points to the PSP directory
table is called new_psp_directory, since the entry at EFS offset 0x10
was used on some early AMD chips to point to the older PSP directory
table and that one is already called psp_directory. amdfwtool uses the
same naming scheme for those two PSP directory table pointers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I10f19ee63f8d422433dba64402d84fd6bb9e0f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73083
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select NO_S0IX_SUPPORT for `starlabs/starbook` and `atlas/prodrive`
so their configurations are unchanged.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I718952165daa6471f11e8025e745fe7c249d3b46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72800
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Report `4` in `_S0W` only when D3COLD_SUPPORT is enabled, as if it
is not, it will break S3 exit.
When D3COLD_SUPPORT is not enabled, return `3` (D3Hot).
This fixed S3 exit on both TGL and ADL. Tested on StarBook
Mk V and Mk VI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3a4b89132b594ad568a5851137575f921f8e2a2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72765
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
If BIOS_DONE MSR is supported, set it after ReadyToBoot, because FSP
programs certain registers via Notify phase ReadyToBoot and it cannot
be modified by FSP after coreboot has set BIOS_DONE MSR, therefore we
try to set BIOS_DONE MSR as late as possible to avoid this.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I4f19a7c54818231ebbccd2b6f8b23f47b117eb1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71964
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Add fast_spi_set_vcl() to be called by the SOC lockdown function if SPI
Vendor Specific Component Capabilities are desired.
Change-Id: I6d9b58e90fa16c539b90c6b961862e97e1bf29a2
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72478
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To make MIPI/eDP panel functional on unprovisioned devices, it requires
passing SKU ID and panel ID info to the payload(depthcharge) to load the
corresponded device tree for kernel.
BUG=b:247415660
TEST=cbmem -1 |grep "SKU Code".
Change-Id: Id2254729b7bd621d1e9bc520e8f40916d0f81030
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73076
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch adds enable/disable FSP DisableEnergyReport feature
option to be used in devicetree for power instrument purpose.
BUG=None
Branch=None
Test=Build and boot MTL RVP.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I58d4aea28ee2561d2ed73260c40cb22ce3fdd135
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Replace the magic number with the CPUID_FROM_FMS macro to make it easier
to read.
TEST=Resulting image of timeless build for pcengines/apu2 is identical
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I15480dc883b65b5ffaf0cd38cf4e1f7b2222022e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73069
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of having two entries for two different steppings of the same
family and model combination using the CPUID_EXACT_MATCH_MASK, just have
one entry that uses CPUID_ALL_STEPPINGS_MASK to cover all steppings.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0118bb9b4b0be4d954a657d50789addca08a784e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73068
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The platform supports a discrete LPC TPM module. However, ME firmware
enables PTT by default and descriptor is configured for SPI TPM on the
platform's original firmware. So disabling PTT in ME is not enough,
because it falls back to SPI TPM. Ensure PTT is disabled in ME and SPI
TPM is disabled in descriptor soft straps.
TEST=Boot VP4650 and see LPC TPM is recognized by coreboot.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3764e085f2eb5ae957b9087d150320def7af4fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Based on product spec v1.4, update T3 timing to 150 ms from 300 ms
BRANCH=none
BUG=b:269041202
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Change-Id: Ie5bd4bc2c8be2e43470edd374af0623162067497
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
Some users of MSI Z690-A board reported non-working IGD display
during post using various CPUs. As not all PCI IDs were hooked,
coreboot didn't detect GOP-provided framebuffer nor passed the
framebuffer information to the payload, causing a black screen.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I07584e07182ee56b61b6f751100431589d1cbe83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elias Souza <eliascontato@protonmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
EricKY Cheng