Open coding bitfields is really annoying as no one knows
what they are unless you have a doc in front of you.
Fill in the bitfields for the GEN_PMCON_A and GEN_PMCON_B
registers.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Id48de68eaa3896c17d5da2ffb0bcf17062f73e5e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290336
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I968be9736419e26a771e0a0c3c964d540fbb1efe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11182
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
FSP was setting up the TCO registers to be mapped at 0x400.
However, the SMBus initialization in romstage was mapping
its I/O BAR to 0x400 as well. The result seemed to cause the
TCO register to be hidden. However, the board was rebooting in
depthcharge when the SMBus device was enabled from a TCO timeout.
As the TCO timer was halted before the double resource assignment
it's not clear how the TCO was getting re-enabled. In either case,
the current behavior is wrong.
BUG=chrome-os-partner:42407
BRANCH=None
TEST=Built and booted glados w/ SMBus enabled.
Original-Change-Id: I43c0d67a76abac51ccfd5105245792981fbcd04c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290363
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I3839290768c27626c3fd2d67d5de94c291c1386e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's important to be able to configure the gpio pads at
various stages instead of a single place using FSP. Without
this support there is a lot of duplicated open-coded pad
configuration taking place both within the SoC code and
mainboards.
Current limitation is that all GPIOs are in ACPI mode. i.e.
The HostSW ownership register sets the pad configuration to
only update GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS. The
GPI_STS update is masked within the GPIO community registers.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Id8a00e99c7a4c3912de2feaff9cea12b402f2c68
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289789
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I4c86b47ac5ab004f2bfd7cb07dd23c458f7dbb7c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11174
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Many Kconfig options changed in coreboot.org since
skylake was first started. Fix Kconfig option name
changes, and also provide a common option, UART_DEBUG
that can be selected to select all the necessary
options.
Note: It's still a requirement to manually unset the
8250IO option because that's unconditionally set.
BUG=chrome-os-partner:43419
BUG=chrome-os-partner:43463
BRANCH=None
TEST=Built glados. Booted into kernel. Kernel reboots somewhere.
Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289951
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11172
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for enabling various pins in Deep Sx by setting
a register in the mainboard devicetree.
BUG=chrome-os-partner:43079
BRANCH=none
TEST=build and boot on glados
Original-Change-Id: I1b4fb51f72b88bdc49096268bdd781750dcd089d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7555a92fecc6e78b579ec0bc18da202cb0c824e2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CBFS_SIZE is living as a mainboard attribute. Because
of the Kconfig include ordering the SoC *cannot* set
the default. Remove from the soc Kconfig and add a
default Kconfig for SOC_INTEL_SKYLAKE.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=built glados
Original-Change-Id: I8808177b573ce8e2158c9e598dbfea9ff84b97c7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289833
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: Icf52d7861eee016a35be899e5486deb0924a0f3c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11168
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In the review process for http://review.coreboot.org/#/c/11052/
the code was mangled and the result was unbuildable code. Fix this.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Can actually build bootblock.
Original-Change-Id: I5bc63b8c435dbf025f1c334e9a1bc4a9da2b4902
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289788
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: Id0f67d8b74fa9146bf01990f599d538222f7e0e2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11167
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Remove dependency of common reset code on FSP
BRANCH=none
BUG=None
TEST=Build and run on Braswell and Skylake
Original-Change-Id: I00052f29326f691b6d56d2349f99815cafff5848
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286932
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7f59f0aad7dfae92df28cf20fff2d5a684795d22
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11165
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
For Skylake, Microcode is being loaded from FIT, Skylake supports
the PRMRR/SGX feature. If This is supported the FIT microcode
load will set the msr (0x08b) with the Patch id one less than the
id in the microcode binary. This results in Microcode getting
reloaded again in bootclock and ramstage (MP init).
Avoid the microcode reload by checking for PRMRR support.
BUG=chrome-os-partner:42046
BRANCH=None TEST=Built for glados and tested on RVP3
CQ-DEPEND=CL:287513
Change-Id: Ic5dbf4d14dc1441e5b5acead589a418687df7dca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c599714b2aef476297eeaad5da8975731b12785a
Original-Change-Id: Id3a387aa2d8fd2fd69052bfc7b4e88a7ec277a72
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287674
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11056
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
If Skylake microcode is being loaded from FIT, Skylake supports
the PRMRR/SGX feature. If this is supported the FIT microcode
load will set the msr (0x08b) with the patch ID one less than the
ID in the microcode binary. This results in microcode getting
reloaded again in the bootblock cpu init.
Avoid the microcode reload by checking for PRMRR support.
BUG=chrome-os-partner:42046
BRANCH=None
TEST=Built for glados and tested on RVP3
Change-Id: I06e59f5cad549098c7ba2dfa608cd94a0b3f0ae1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6242b9dea283149bd0c968af1ba186647d37162d
Original-Change-Id: Iea5a223aa625be3fc451e8ee5d3510f548b07f8b
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286054
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11052
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Remove the items that are obviously broadwell left or become no-need
with fsp.
BUG=chrome-os-partner:43186
BRANCH=None
TEST=build and boot on sklrvp3.
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Change-Id: I5dfd62363eecc514e45a7b7ba0961ec7fe0499ee
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 570920cdc9e9c08ee85dcb08998069f1cae2d3cd
Original-Change-Id: I63176584042516c4d28f1bb6403e7bbe5de61010
Original-Reviewed-on: https://chromium-review.googlesource.com/288833
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: http://review.coreboot.org/11072
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some of the field and register names in the power management
code were not reflecting current chipset documentation. While
in there fix 0-sized array in the power_state structure. Lastly,
log the entire STD GPE register for visibility in elog. It reports
as an extension of other GPIO wake events.
BUG=None
BRANCH=None
TEST=Built and booted.
Change-Id: I57a621a418f90103ff92ddbf747e71a11d517c9a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: ed15cc7d0aeee8070e134ed03e28fced9361c00e
Original-Change-Id: I19f9463c87e9472608e69d143932e66ea2b3c3e1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288296
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11070
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to aid users of the PCR register space provide
pcr_port_regs().
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built glados.
Change-Id: Ibfcffbfd4304a59dd80a88dc18404d3a5dfa2f5d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 5f796319ba1d00557e32bf18309fc3cc772ccae0
Original-Change-Id: I21243d18c1bbd19468f8f279b2daa4e40a8f0699
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288193
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11068
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide more clarity on what some of the gpio
functions are doing add a 'gpio_' prefix to the globally
visible functions.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built glados.
Change-Id: I4cf48558c1eb9986ed52b160b6564ceaa3cb94b4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: f79ef113797884063621fe6cd5cc374c53390ebd
Original-Change-Id: I0d8003efff77b92802e0caf8125046203f315ae4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288192
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11067
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These types and definitions were carried over from a previous
platform. However, they are not used. Remove them.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built on glados
Change-Id: Ib3d20222df34a32865aac6b6cf13517c208e17c6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: be2d0d273a6c02483a944edac95ab48c433b29cd
Original-Change-Id: I56a0d549f5733eec8f405f2024ced8c153fa545c
Original-Signed-off-by: Aaron Durbin <adurbin@chormium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288191
Original-Trybot-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Commit "BCRD2: Enable LPDDR3" with the Change-Id listed below contained
additions to braswell's chip.h which were lost during merging.
BRANCH=None
BUG=None
TEST=google/strago builds
Change-Id: I995b788b6a308cefa23228544127bb1e384bbcc7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 561edf23ab696772fd0a6af34cb435db9d96e912
Original-Change-Id: Ie08900bc62d517394412cc597274fb8f5b6b0f51
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Original-Change-Id: I1cb5a03b77baf2df125b648dd75c9f8166f5571e
Original-Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Original-Reviewed-on: https://chromium-review.googlesource.com/282155
Original-Reviewed-on: https://chromium-review.googlesource.com/288880
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11065
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enable PMIC SVID config for BCRD2 based
on board id. UPD parameter is used to
select the SVID config and PMIC I2C bus
number
BRANCH=None
BUG=None
TEST=Build and boot the system
Change-Id: I3c4c06bd25c241abdf46aa14af74eecf77cf77a6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 10bb8d4ad96d1187f6e135ca1535d70ae45ee887
Original-Change-Id: I9191db7bace4f4840e3c32381093c6c0806f7c32
Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282156
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The fspNotify(EnumInitPhaseAfterPciEnumeration) is already
registered in fsp_util.c as a generic callback, this is some code
left from early development.
Also I don't see a need for the chip_final function, although we
could keep it as a placeholder but i decided to remove it.
BUG=chrome-os-partner:42979
BRANCH=None
TEST=build with current fsp and the coming fsp 1.3.0, boot on sklrvp3.
Change-Id: Ia892f2021be324859c344b4cb8cdeaf75f7ee32f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae22ad57ddbab787da000ae99f85fd2b3d4092e7
Original-Change-Id: I41be566da71f80451ff70ddd8ada77bf9b8d5b1d
Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287991
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11054
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In order to build without CONFIG_CONSOLE_SERIAL the Skylake
SOC Kconfig should not be enabling serial console by default.
Also fix other compile issues when serial console is disabled.
BUG=chrome-os-partner:40857
BRANCH=none
TEST=build glados without serial console enabled
Change-Id: I2b20d9d9cd66e79587525f7bb458782eeeac4a95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f40fbea8d5dade560c08e4abf15a2a1cc28b9e55
Original-Change-Id: I6c5da8a5eee4090c89deb8feba676479cd834292
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287438
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11043
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Since the FSP memory info HOB does not return all the data that we
need about a DIMM add a weak function that will allow the mainboard
to supplement the generated memory_info structure.
Ideally this would not be necessary but until FSP returns the
module part number we need this.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=run "mosys memory spd print all" on glados
Change-Id: Ic6d0ee0a31d23efcf7e7d7f18a74e944e09e7b46
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34ad7f1906ba526e52d38d5a6bce7b88b83f0c13
Original-Change-Id: I8509c5c627c1605894473fdea567e7f7ede08cf9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286876
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11033
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add SMBIOS symbols to define the memory width. Update the Intel common
code to display the memory width and provide the memory width to SMBIOS.
Also display the memory frequency, size and bus width in decimal.
BRANCH=none
BUG=None
TEST=None
Change-Id: I67b814d79fdbbf6ce65ac6b4a8282ab15fb91369
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e59c7260afd180f3adcbeda7cef1b9eca3ed846
Original-Change-Id: Ibd26812c2aad4deaab62111b1e018be69c4faa7b
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282115
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the C types and functions from PCR so that pcr.h
can be included from assembly and ACPI. While in there
make the PCR reg caclulation using a C function and
place the P2SB (PCH_PCR_BASE_ADDRESS) address in iomap.h.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I9cde178bcdbf49327ef7892393fc277f6c74f34b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fdf5c77ecfa0ca8d3c45604d15b9dec9a6e85193
Original-Change-Id: I5996efaa9869f8f412e4d45c13f30233384a38b2
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286901
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11030
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The current primary to sideband (P2SB) code for private configuration
register (PCR) access weren't very clear with the naming or
reasoning for some of the code. Provide more verbiage surrounding
this interface.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I5b2e84444a29b2fc2f527502e8c9f26eb60e687a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 06345ba1abd893059a6584856851f92f43289247
Original-Change-Id: If57a4bbc90365c1135b4986dce328b5dbabe483b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286900
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11029
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Baytrail FSP Gold4 release added 5 PCD options. Update UPD_DATA_REGION
structure to include these new PCD options and initialized the setting
when given in devicetree.cb.
Change-Id: Ic343e79479464972455e42f9352b3bb116c6f80f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/10838
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Log the global reset causes in the power state structure.
While working in there pack the struct and use width-specific
types as this struct crosses the romstate <-> ramstage boundary.
Lastly, remove hsio version as it wasn't being written or read.
After global reset induced:
PM1_STS: 0000
PM1_EN: 0000
PM1_CNT: 00000000
TCO_STS: 0000 0000
GPE0_STS: 00000000 00000000 00000000 00000000
GPE0_EN: 00000000 00000000 00000000 00000000
GEN_PMCON: d8010200 00003808
GBLRST_CAUSE: 00000000 00040004
Previous Sleep State: S0
BUG=None
BRANCH=None
TEST=Induced global reset on glados using ETR3 register and write
to cf9.
Change-Id: I97b93de336e74c0e02199241376e74340612f0a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bbc8f1d62131c0381e9d401f3281ee7a17fc2a47
Original-Change-Id: I1a8e5d07c6c0e09c163effe27491d8f198823617
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286640
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11011
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
If a resume from S3 is occuring one needs to take into account
deep S3 in order to check the proper power failure bits.
When deep S3 is enabled the suspend well will be turned off.
Therefore don't look for that bit when determining a power
failure.
BUG=chrome-os-partner:42847
BRANCH=None
TEST=Suspend and resumed with deep s3 enabled and disabled.
Change-Id: I2b3372a40b3d8295ee881a283b31ca7704e6764a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3ba22be37d8700f4e8a4a0f5c05fb9290cfc9b2
Original-Change-Id: I890f71a7cbea65f1db942fe2229a220cf0e721b0
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286271
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11007
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
GEN_PMCON_A and GEN_PMCON_B are 32-bits wide. Read out and
save the full 32 bits for completeness.
BUG=chrome-os-partner:42847
BRANCH=None
TEST=Built and booted. Noted output on terminal.
Change-Id: I24e589271d49c8cfc3fab327cfe4999c24fb95d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5a419b2538dc45b1bd0d19b7e6afd45fff9dd4a0
Original-Change-Id: Ie587e886ea34e36d106ff4670781467266a51ddb
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286270
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11006
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch updates the Serial IO modes for UART2 to PCI mode
in devicetree for glados board.
Also we switch over to CONSOLE_SERIAL8250MEM_32 here. 8-bit
legacy UART will stop working after devicetree change.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for glados and tested LPSS logs on glados.
CQ-DEPEND=CL:284881 CL:284882 CL:284883
Change-Id: I433979c852c80848c006ef089b43d75a17e761c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c37519e0762801cbb9b547b538b385c84299189
Original-Change-Id: I2faec08d089e407c5ab9838bea980553f49821c4
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
printk called before console init causes sluggish execution because
of Rx timeout.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for sklrvp and tested LPSS logs on RVP3 and Kunimitsu.
Change-Id: I61d5c0f5a4e93695bcba90b7ac7d4f68e2d625be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 77c58702c8279c6d9c6ae1c946bf1b76df20714d
Original-Change-Id: Ib85029456059248cc2c88aaccba4fa12cc5a76be
Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284823
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10996
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
FSP will initialize GPIOs during TempRamInit.
So configure LPSS UART2 GPIOs in native mode
after TempRamInit.
BRANCH=none
BUG=chrome-os-partner:41374
EST=Build and boot on RVP3. Check LPSS logs on UART2
Change-Id: I8016dd76a5bc06e90f9460273be7e83c5e8f8bb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb72e715ef3f566e900727ac8b9494bca1d5971c
Original-Change-Id: If1b1a1047ebd5e5f170d91972d11c51aa6fd84a9
Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281604
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10995
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On Skylake, only UART2 is supported as debug port and the macros
INTEL_PCH_UART_CONSOLE_NUMBER, INTEL_PCH_UART_CONSOLE and the partial
code for UART0, 1 are cleaned up for Skylake and Sklrvp, Kunimitsu and
Glados boards.
BRANCH=none
BUG=chrome-os-partner:40857
TEST=Built for kunimitsu, checked the coreboot logs on LPSS UART2
Change-Id: I2fbcfb1d1ca6f59309a77c67d022cf4f5da7f7c0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e714c18d462bc7bdd7068309fb6be77da6973642
Original-Change-Id: I9343abd90ce685ea2d676047dccbefad7457b69f
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10994
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
FSP 1.1 platforms should be conforming to the spec. In order
to ensure following specification remove the crutch that allows
FSP to no conform.
BUG=chrome-os-partner:41961
BRANCH=None
TEST=Built.
Change-Id: I28b876773a3b6f07223d60a5133129d8f2c75bf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c3fe08c5af41867782e422f27b0aed1b762ff34a
Original-Change-Id: Ib97027a35cdb914aca1eec0eeb225a55f51a4b4b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285187
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10993
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Removing GOP initialization in normal mode since we don't need to
show splash screen in normal mode. GOP will get initialized in dev
and recovery mode.
BRANCH=none
BUG=None
TEST=Splash screen will come only in dev or recovery mode.
Change-Id: Ia5e12cf45d723f2f14c447e29b78119552d5e1ea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 79d1c877343704ea51143b922d9ac9209be4d4b5
Original-Change-Id: Id5ca99757427206413483d07b4f422b4c0abfa5d
Original-Signed-off-by: Abhay <abhay.kumar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285300
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10990
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
All boards should have their L1 sub states working now so
re-enable the defaults.
BUG=chrome-os-partner:41861
BRANCH=None
TEST=Built and booted glados into OS. PCIe devices show up still.
Change-Id: Ic040fa108a662e15bb97cf8b0961f0f56683e146
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 380491f8267e60c3c6bc62486aaf21e201fcfd36
Original-Change-Id: Idc6923b1fdd1c20d463eb7782be112f90b9adbfd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285170
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10989
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For some unkonwn reason the pcie root port settings weren't
being honored in the device tree. Fix that omission.
BUG=chrome-os-partner:41861
BRANCH=None
TEST=Built with CONFIG_DISPLAY_UPD_DATA and noted devicetree
settings were being honored.
Change-Id: Id880eca57544efb13f5cbbc06b2634c86b7c5d29
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2d00e68ce6cfcb3d63d69848f4a8ce232f6c1257
Original-Change-Id: Idd37d65374842294f4b0c91eb841c6d1d93e92ee
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285027
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10987
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Unhide the SPI controller PCI device if it is enabled in
devicetree.cb so flashrom can do its job.
BUG=chrome-os-partner:37711
BRANCH=none
TEST=run flashrom -r on glados
Change-Id: Ie567f970149700d29df0ae09db4962f36cf24219
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 172eac55ad6134fe5e347e37c055b383e3b03245
Original-Change-Id: Ia77b559cc607794aecc25d6d469224d855199568
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/284948
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10986
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
All \_PR entries needs to be changed from CPU# to CP##
so that it can support more cores.
BRANCH=none
BUG=chrome-os-partner:38734
TEST=build and boot cyan/strago boards.
Change-Id: I80a79ec8edbce46826140470645b7532ae361f91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca269a7ffcd2ef16fcef93851e68c2d91104e3e1
Original-Change-Id: I48e73742dc3b11ee6e96f70bcd2d10d01609ad7c
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285700
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10991
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
They have been removed in the rest of the code already.
http://review.coreboot.org/#/c/4506/
Change-Id: I232cc2ccd4dd90359de4ab710486db65667500f4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10964
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Found by the commit hooks.
Change-Id: I9baa90ca0111ddc9cb69cbb7dd17f63e8a98a04f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10965
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the files to support the Skylake SOC.
Matches chromium tree at 927026db
BRANCH=none
BUG=None
TEST=Build and run on a Skylake platform
Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use the Broadwell implementation as the comparison base for Skylake.
BRANCH=none
BUG=None
TEST=None
Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10340
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use the simplified CBFS image type name in Makefile.inc.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Idb62de7fce36fde38a6fbeeefdfc2dd0d75bd493
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Should fix regression in HDA verb setup on nvidia mcp55 and intel sch
southbridges. The mcp55 code could not find the mainboard's verb table
because the table was not even being compiled in. The sch boards appeared
to have the same issue.
Intel broadwell and fsp_bd82x6x seemed to have not gotten the boilerplate
shrink, so apply it to those too.
Followup-to: Ib3e09644c0ee71aacb067adaa85653d151b52078
(azalia: Shrink boilerplate)
Change-Id: If7aae69f5171db67055ffe220bdff392caaa5d9f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10826
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Include the microcode files from the microcode subdirectory.
BRANCH=none
BUG=None
TEST=Build and run on cyan.
Change-Id: I4c8bf64d221d9ead18f1b7d6e1f01f61d88c9b25
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10873
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Fix a cut and paste error in the warranty statement.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: If64b02f2c0fc2970932f23b99ad64beab5ab754e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10835
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Fix up all the code that is using / to use >> for divisions instead.
Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10819
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove some CamelCase in acpi.c
Add FSP PcdDvfsEnable configuration parameter.
Add lpc_init and lpc_set_low_power routines.
Remove Braswell reference to make code easier to port to another SOC.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: I5063215fc5d19b4a07f3161f76bf3d58e30f6f02
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10768
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Build the GNVS pointer and add it to the DSDT.
Add the opregion for GOP support.
Build the SSDT entry and add it to the RSDP.
The arch/x86/boot/acpi.c module adds the HPET entry, remove the
acpi_create_intel_hpet routine.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: I8c7ae36b24da583928ad2532f611a855268b51f9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10748
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are all Kconfig symbols that have been removed or renamed.
USE_PRINTK_IN_CAR was removed in commit 8c4f31b3
Drop the USE_PRINTK_IN_CAR option. It's a bogus decision...
DYNAMIC_CBMEM was removed in commit e2b0affd
Remove Kconfig variable that has no effect
MAINBOARD_HAS_BOOTBLOCK_INIT was removed in commit 342535cc
Remove Kconfig variable that has no effect
CACHE_ROM was removed in commit 4337020b
Remove CACHE_ROM.
SMM_MODULES was removed in commit 44cbe10f
smm: Merge configs SMM_MODULES and SMM_TSEG
INCLUDE_MICROCODE_IN_BUILD was removed in commit eb73a218
soc/fsp_baytrail: Fix use of microcode-related Kconfig variables
CAR_MIGRATION was removed in commit cbf5bdfe
CBMEM: Always select CAR_MIGRATION
REQUIRES_BLOB was removed in commit 70c85eab
build system: Retire REQUIRES_BLOB
CPU_MICROCODE_IN_CBFS was renamed to SUPPORT_CPU_UCODE_IN_CBFS in commit
66e0c4c8 - cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFS
CONSOLE_SERIAL_UART was renamed to CONSOLE_SERIAL in commit afa7b13b
uart: Redefine Kconfig options
CONSOLE_SERIAL8250MEM was renamed to DRIVERS_UART_8250MEM in commit
afa7b13b - uart: Redefine Kconfig options
Change-Id: I8952ca8c53ac2e6cec5f9c77d2f413f086bfab9d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10766
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add the common/firmware subdir to the baytrail & fsp_baytrail
makefiles and remove the code it replaces.
- Update baytrail & fsp_baytrail Kconfigs to use the common code.
- Update the IFD Kconfig help and prompts for the TXE vs ME.
- Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail
platforms have their own defaults.
Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10647
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Restrict the use of the common romstage/ramstage code to FSP 1.1
BRANCH=none
BUG=None
TEST=Build and run on cyan/sklrvp
Change-Id: Ifbdb6b4c201560a97617e83d69bf9974f9411994
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10653
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the copyright address from all of the files.
BRANCH=none
BUG=None
TEST=None
Change-Id: I7190e34e165e5652d33902440fa08253b77f4af2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10337
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the files to support the Braswell SOC.
BRANCH=none
BUG=None
TEST=Build for a Braswell platform
Change-Id: I968da68733e57647d0a08e4040ff0378b4d59004
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10051
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Because of a missing close quote, we have the warning:
src/soc/intel/common/Kconfig:52:warning:multi-line strings not supported
This was added in commit 0946ec37 -Intel Common SOC:Add romstage support
The whitespace issue - using spaces instead of a leading tab was added
in the same commit.
Change-Id: I429c66afb5a7e10ca0e0ef619ac46722c63fb376
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10654
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Provide a common romstage implementation for the Intel SOCs.
BRANCH=none
BUG=None
TEST=Build for Braswell
Change-Id: I80f5f8f0f36e9023117b07d4af5c806fff8157b6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10050
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CAR_MIGRATION was removed in commit:
cbf5bdfe - CBMEM: Always select CAR_MIGRATION
ALT_CBFS_LOAD_PAYLOAD was removed in commit:
cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD
MARK_GRAPHICS_MEM_WRCOMB was removed in commit:
30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB.
EXTERNAL_MRC_BLOB was removed in commit:
0aede118 - Drop unused EXTERNAL_MRC_BLOB
CACHE_ROM is only in Google's codebase.
LID_SWITCH is only in Google's codebase.
DEFAULT_POST_DEVICE_LPC is only in Sage's codebase.
ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used.
HUDSON_NOT_LEGACY_FREE never existed as far as I can tell.
MAINBOARD_DO_EDID never existed as far as I can tell.
Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10616
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The CBFS size is really mainboard specific, since it really depends on
size of the chip on the mainboard, so it makes sense to have it in
the mainboard menu along with the ROM-chip size.
- Move the CBFS_SIZE definition up in src/kconfig
- Move the Mainboard Menu markers out of src/mainboard/kconfig into
src/Kconfig so CBFS_SIZE can live in the mainboard menu.
- Add a long list setting default values to do what the chipset
directories were previously defaulting the values to. This will
be trimmed down in a following patch that creates a common set of
IFD routines. (Who knew that kconfig supported line wrapping?)
- Update the help text.
Change-Id: I2b9eb5a6f7d543f57d9f3b9d0aa44a5462e8b718
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10610
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Allow adding and executing a refcode binary.
Change-Id: I00e91a088a5695b42528e246d0ed642d988603e3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/10638
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's guarded by a non-standard configuration option, so didn't trigger.
Change-Id: Ib7a9a45befcb7857edde37e20de7d65a60970882
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10623
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The symbols used in these expressions were not correct and would never
evaluate as true.
Change-Id: Ia20177f41505473b14bc7b8e4b6fb16de36cc295
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10437
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The HAVE_UART_MEMORY_MAPPED symbol is no longer present, so these
don't actually select anything.
Change-Id: I6d0eb610e48a4506ac7449ac677ee67981d0ff0d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10608
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of having the chipset code make the approrpiate
calls at the appropriate places use the cbmem init hooks
to take the appropriate action. That way no chipset code
needs to be changed in order to support the external
stage cache.
Change-Id: If74e6155ae86646bde02b2e1b550ade92b8ba9bb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It can be helpful to certain users of the cbmem init hooks
to know if recovery was done or not. Therefore, add this
as a parameter to the hooks.
Change-Id: I049fc191059cfdb8095986d3dc4eee9e25cf5452
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Squashed and adjusted two changes from chromium.git. Covers
CBMEM init for ROMTAGE and RAMSTAGE.
cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API
There are several use cases for performing a certain task when CBMEM is
first set up (usually to migrate some data into it that was previously
kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them
differently: timestamp migration is called explicitly from
cbmem_initialize(), certain x86-chipset-specific tasks use the
CAR_MIGRATION() macro to register a hook, and the CBMEM console is
migrated through a direct call from romstage (on non-x86 and SandyBridge
boards).
This patch decouples the CAR_MIGRATION() hook mechanism from
cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer
description of what it really does. All of the above use cases are
ported to this new, consistent model, allowing us to have one less line
of boilerplate in non-CAR romstages.
BRANCH=None
BUG=None
TEST=Built and booted on Nyan_Blaze and Falco with and without
CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after
boot (and the resume log after S3 resume on Falco). Compiled for Parrot,
Stout and Lumpy.
Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbmem: Extend hooks to ramstage, fix timestamp synching
Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common
CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since
timestamp_sync() was no longer called there. Oops.
This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism
to the cbmem_initialize() call in ramstage. The macro is split into
explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as
possible and prevent surprises (although just using a single macro and
relying on the Makefiles to link an object into all appropriate stages
would also work).
This allows us to get rid of the explicit cbmemc_reinit() in ramstage
(which I somehow accounted for in the last patch without realizing that
timestamps work exactly the same way...), and replace the older and less
flexible cbmem_arch_init() mechanism.
Also added a size assertion for the pre-RAM CBMEM console to memlayout
that could prevent a very unlikely buffer overflow I just noticed.
BRANCH=None
BUG=None
TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once
again show up. Compile-tested for Rambi and Samus.
Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7878
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9599
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9597
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The input/output value max is no longer used for tracking the
bus enumeration sequence, everything is handled in the context
of devicetree bus objects.
Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8541
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use of scan_static_bus() and tree traversals is somewhat convoluted.
Start cleaning this up by assigning each path type with separate
static scan_bus() function.
For ME, SMBus and LPC paths a bus cannot expose bridges, as those would
add to the number of encountered PCI buses.
Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
As there can be more than one source of firmware assets this
patch generalizes the notion of locating a particular asset.
struct asset is added along with some helper functions for
working on assets as a first class citizen.
Change-Id: I2ce575d1e5259aed4c34c3dcfd438abe9db1d7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10264
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Timestamps should not be forced on by a subset of chipsets.
However, they are a requirement on Chrome OS platforms, so
have CONFIG_CHROMEOS select it.
Change-Id: I408c6b17aa8721a3abec69020084174e414a8940
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/10357
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG
Remove some newly dead code while on it.
Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10355
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10322
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This code is not specific to ChromeOS and is useful outside of it.
Like with small modifications it can be used to disable TPM altogether.
Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10269
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of being pointer based use the region infrastrucutre.
Additionally, this removes the need for arch-specific compilation
paths. The users of the new API can use the region APIs to memory
map or read the region provided by the new fmap API.
Change-Id: Ie36e9ff9cb554234ec394b921f029eeed6845aee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
SLIT and SRAT are created this way only on amdk8 and amdfam10.
This saves the need of having a lot of dummies.
Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7052
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
I messed up the conditionals on loading the reference code.
The bug used || instead of && causing 2 reference codes to
be loaded.
Change-Id: I29a046bf0e8dc29a9efdb636ebfd04e11eb73f82
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10185
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
There's now room for other repositories under 3rdparty.
Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10109
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To move 3rdparty to 3rdparty/blobs (ie. below itself
from git's broken perspective), we need to work around
it - since some git implementations don't like the direct
approach.
Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix compiler error's due to type mismatch. This is broken since commit
bde6d309 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to
pointer).
TEST=Build with CONFIG_DEBUG_SPI_FLASH=y and booted on Minnowboard Max
Change-Id: Id3d448e219716135897f381a73d416ff34036118
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10075
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Several of the intel platforms define the region reserved
for PCI memory resources in a location where it overlaps
with the MMIO (MCFG) region.
Using the memory map from mohon_peak as an example:
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000009ffff: RAM
2. 00000000000a0000-00000000000fffff: RESERVED
3. 0000000000100000-000000007fbcffff: RAM
4. 000000007fbd0000-000000007fbfffff: CONFIGURATION TABLES
5. 000000007fc00000-000000007fdfffff: RESERVED
6. 00000000e0000000-00000000efffffff: RESERVED
7. 00000000fee00000-00000000fee00fff: RESERVED
8. 0000000100000000-000000017fffffff: RAM
The ACPI table describing the space set aside for PCI memory
(not to be confused with the MMIO config space) is defined
as the region from BMBOUND (the top of DRAM below 4GB) to
a hardcoded value of 0xfebfffff. That region would overlap
the MMIO region at 0xe0000000-0xefffffff. For rangeley
the upper bound of the PCI memory space should be set
to 0xe0000000 - 1.
The MCFG regions for several of the affected chipsets are:
rangeley 0xe0000000-0xefffffff
baytrail 0xe0000000-0xefffffff
haswell 0xf0000000-0xf3ffffff
sandybridge 0xf8000000-0xfbffffff
TEST = intel/mohonpeak and intel/bayleybay.
Change-Id: Ic188a4f575494f04930dea4d0aaaeaad95df9f90
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/9972
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
So don't try to use it elsewhere.
Change-Id: Ia600ba654bde36d3ea8a0f3185afae00fe50bfe9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10030
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
That's a Haswell exclusive, used nowhere else, but confusing
when hunting for the monotonic timer used on that SoC.
Change-Id: I60ec523e54e5af0d2a418bcb9145de452a3a4ea9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10034
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SPI flash drivers need it.
Change-Id: I63d79472d70d75f7907e7620755c228d5a4918e1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10033
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Builds with CHROMEOS fail due to missing includes.
Change-Id: I8c88bca8f8cc3247d3f3311777f794c4fdfee3c1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10029
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In the true spirit of separating components more strictly
and allowing to add new components to coreboot without touching
existing code, move Intel common code selection to the soc
Kconfig and out of src/soc/intel/common/Makefile.inc
Change-Id: I0a70656bb9f4550b6088e9f45e68b5106c0eb9af
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10031
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change switches all SOC vendors and southbridges
to be autoincluded by Makefile.inc, rather than having to be
mentioned explicitly in soc/Makefile.inc or in
soc/<vendor>/Makefile.inc.
This means, vendor and SOC directories are now "drop
in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree components to be
built with a given coreboot version (given that the API did not
change).
Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9799
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Consolidate the FspNotify calls into the FSP driver directory,
using BOOT_STATE_INIT_ENTRY to set up the call times.
Change-Id: I184ab234ebb9dcdeb8eece1537c12d03f227c25e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/9780
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The value of SMM_TSEG_SIZE was equal to SMM_RESERVED_SIZE. This caused
the install_permanent_handler() function to fail. Changed the value to
0x800000, which is already used as default in smm_region_size() in case
SMM_TSEG_SIZE is 0.
Change-Id: I4ff3568aefd4729a98c1777a2cae2a4715afbc2f
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/9961
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Prepare for FSP 1.1 integration by moving the FSP to a FSP 1.0 specific
directory. See follow-on patches for sharing of common code.
Change-Id: Ic58cb4074c65b91d119909132a012876d7ee7b74
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9970
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since CHROMEOS_VBNV_* are selected by mainboards, they
may be active without CHROMEOS being selected. In this
case, they should be a no-op.
Change-Id: I3b84e2a919ffaa809d713e72e5e4df7a7575e6b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9954
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Many chipsets were using a stage cache for reference code
or when using a relocatable ramstage. Provide a common
API for the chipsets to use while reducing code duplication.
Change-Id: Ia36efa169fe6bd8a3dbe07bf57a9729c7edbdd46
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8625
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Found that any non-USB3.0 devices connected to type-C ports
(displayPort dongles) cause XHCI port to see connection which in turn
leads us to enter USB compliance mode.
That in turn causes the port to wake the system for a yet-to-be
determined reason. Clearing the PORTSC status bits (actually just
CSC) seems to remedy the wake.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35320
TEST=manual,
1. Plug hoho into type-C port on samus and remove
2. powerd_dbus_suspend
Device stays asleep.
Change-Id: Id3a291579ffca0152a7ef32e37ecae80ca08a82b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0be5cba4916681dceb0372e76d9643e6c7175db5
Original-Change-Id: I1396b9f8013dbbb31286c1d8958af592b3da7475
Original-Reviewed-on: https://chromium-review.googlesource.com/247410
Original-Commit-Queue: Todd Broch <tbroch@chromium.org>
Original-Tested-by: Todd Broch <tbroch@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9814
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I97920e7eb64c05034184f9a4e1c8f2dfa44d3fdd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9813
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the board is configured with a pre-graphics delay it should
be skipped in the resume path.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=measure resume time in dev mode to be same as normal mode
Change-Id: I5a4ad5bba9e5316c89f7935d8811759b041429d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b44a7167532410fc44ca9df1c91c91aaf541ae49
Original-Change-Id: Ic9f2cda71d8a567f57e863409f0f3fb98ab68bcf
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245116
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9812
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch fixes the use of the recovery button, and the value is stored
in a SATA controller scratch register.
BUG=chrome-os-partner:35241
BRANCH=none
TEST=Use recovery button and run firmware_RecoveryButton
Change-Id: Ia06f147c7e44d6c4eea2c2e4f502c233c956ee9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34c7ee922a9602b3448a72cd669fd68feeed1bba
Original-Change-Id: I1667c7f188b0f87c4bc7caa82f9c977b2b4c0611
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241772
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9811
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To avoid entries with Type-C alternate mode devices disable
compliance mode entry. This needs to be set on both boot
and resume.
BUG=chrome-os-partner:35320
BRANCH=samus
TEST=manual:
1) boot on samus with USB keyboard plugged in -> controller in D0 at boot
2) iotools mmio_read32 0xe12080ec == 0x18010c01
3) suspend and resume
4) iotools mmio_read32 0xe12080ec == 0x18010c01
5) remove USB keyboard -> controller in D3
6) iotools mmio_read32 0xe12080ec == 0xffffffff
7) plug in USB keyboard -> controller in D0
8) iotools mmio_read32 0xe12080ec == 0x18010c01
9) boot with no external USB devices -> controller in D3 at boot
10) iotools mmio_read32 0xe12080ec == 0xffffffff
11) plug in USB keyboard -> controller in D0
12) iotools mmio_read32 0xe12080ec == 0x18010c01
Change-Id: I4d566112b3c188bafdf9a4bbd92944c89500e3e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db8c8ab8ff25f6a39cd50dcc91b5ba9fd7d05059
Original-Change-Id: I8b68ba75e254a7e236c869f4470207eb5290053d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/251361
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9782
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Move reset support into the Intel common branch. Prevent breaking of
existing platforms by using a Kconfig value to select use of the common
reset code.
BRANCH=none
BUG=None
TEST=Build and run on Glados
Change-Id: I5ba86ef585dde3ef4ecdcc198ab615b5c056d985
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 85d8a6d9628a66cc8d73176d460cd6c5bf6bd6b2
Original-Change-Id: I5048ccf3eb593d59301ad8e808c4e281b9a0aa98
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/248301
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9505
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for applying write protection to the MRC cache
region in SPI flash.
This is only enabled if there is write protect GPIO that is
set, and the flash status register reports that the flash
chip is currently write protected.
Then it will call out to a SOC specific function that will
enable write protection on the RW_MRC_CACHE region of flash.
The implementation is not quite as clean as I would like because
there is not a common flash protect interface across SOCs so
instead it relies on a new Kconfig variable to be set that will
indicate a SOC implements the function to protect a region of
SPI flash.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
1) with either WPSW=0 or SRP0=0 the PRR is not applied
2) with both WPSW=1 and SRP0=1 the PRR is applied
Change-Id: If5907b7ddf3f966c546ae32dc99aa815beb27587
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a3e0e71dfd7339aab171a26b67aec465a3f332d6
Original-Change-Id: I94e54e4723b1dcdacbb6a05f047d0c0ebc7d8711
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241170
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9494
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Serial port on ITE 8772 SuperIO must be initialized before
console_init is called. So the pre console init callback
is added to let mainboard code do proper initialization.
Change-Id: Iaa3e4b9c6e7ce77a7b9a6b9ecedd8ea54f3141dc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 71ee2fd470e19fa4854f895678445b05c17761c1
Original-Change-Id: I594e6e4a72f65744deca5cad666eb3b227adeb24
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/227933
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- These should be 64bit values so when they try to return -1
it is interpreted properly by the kernel.
- The GPE value needs to be reset at the start so it does not
return stale data from a previous resume.
- If a GPE register is zero the value should only be updated
if it has not yet found a set bit.
BUG=chrome-os-partner:34532
BRANCH=samus,auron
TEST=build and boot on samus, suspend/resume with various
wake sources and ensure the reported _SWS values are correct
in every case.
Original-Change-Id: Ic6897f20ad2f321f3566694c032b75a3db120556
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/235012
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit be3c79b87b81563f744eb885708a52730debaccb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I801c6e4f90dde0f5f69685f987a9831ee5e99e4a
Reviewed-on: http://review.coreboot.org/9699
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This code that stores the initial timestamp is not being used,
instead the timestamp is passed to romstage_main().
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Original-Change-Id: I0e0fa1ba74ab93d4454fdfa12208e712d2ae913c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234402
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 838112cf79e2b4d51e5dc87d5ac9cd7e03807f29)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8fd7ba72c14c1e39f7bfa3a1ae8d03289a2abf73
Reviewed-on: http://review.coreboot.org/9698
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to avoid a 300ms timeout waiting for mbp_cleared flag
to be set there is a new flow for the ME10 1.5MB firwmare that
we can follow which will save significant boot time.
This requires sending new commands that do not generate an ACK
message, and ensuring an HMRFPO LOCK message is sent.
In addition now that the delay is removed clean up the ME path
to do the work in init() step and add a final() step that does
the disabling of the PCI device.
BUG=chrome-os-partner:30637,chrome-os-partner:34134
BRANCH=samus,auron
TEST=build and boot on samus, measure ~300ms speedup in boot time
Original-Change-Id: I753087ecd65f6ebed9f812318a359f893e01da9f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234400
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 25aff4b188dc94a99af30869a162e01e3fa8dee7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia35373548a902a718155a1a57057f55067d2f3ac
Reviewed-on: http://review.coreboot.org/9697
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the blobs from the coreboot tree and get them from
3rdparty.
Change-Id: I0798091530be9654d7e073839b4efeb3f9c0302c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9694
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Remove the blobs from the coreboot tree and get them from
3rdparty.
Change-Id: I4938b5c47e6ae7059eda144b664aeafdd674f0fb
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9693
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This is not a standard feature so it should be included by the
mainboard if it is actually present in a system.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=build and boot on samus
CQ-DEPEND=CL:226663, CL:226664
Change-Id: Id4d0e5ed243dcb95e64fb8c848667f651b75aa4e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8909913f5c11c5805c77a3373859634b02a301e2
Original-Change-Id: Ib7c171a5a007a2dddfb3d80341c6dc488e383e99
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226662
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The first 64 bytes of the framebuffer contain garbage after running
the option rom and after calling the VBE mode set with the flag to
clear the framebuffer.
Work around this issue by clearing the first 64 bytes in the framebuffer
in the broadwell graphics setup code after it executes the VBIOS.
BUG=chrome-os-partner:32771
BRANCH=samus,auron
TEST=build and boot on samus in dev mode, check for graphical corruption
Change-Id: I0381e32a5ea17e13c4ed598835999c12136418cf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f29c1b0b7c100cf290f82de671042823032f71c9
Original-Change-Id: I072bc913f7daea16e4861a7549e1b4ec85cde4cd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222676
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9464
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
WPT-LP has 4 SATA ports. Current code assumes 6 SATA ports and as a result,
some reserved bits are written with 1. No specific issue has been observed
so far.
BUG=None
BRANCH=None
TEST=Verify SATA PCI configure space dump on Auron
Change-Id: I737719b3d5cd788158cd5b6991405ba098be4078
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2b55587a74ac5d45354dc123937b562290468855
Original-Change-Id: I9c53ac86e2bf72901647bd2cfa48ac0ce31abea0
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233661
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9479
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Rather than enable this in every mainboard just enable
it by default for all broadwell devices and let a
specific mainboard disable it if needed.
BUG=chrome-os-partner:34420
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I6e47c20abf29abfbd1f4b7905914b4c9fadb0ae7
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 25d3a685893e1c85f7b78e302da3187947a1f84f
Original-Change-Id: I26d9f2e2a12d3f2f888ecb5af0d949eec5928f57
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238400
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9590
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
According to BYT platform design guide chap 14.2.2, the NC GPIOs
need to be configured to GPO.
BRANCH=none
BUG=none
TEST=Test on rambi, boot to OS, and make sure NC pins config to GPO
Change-Id: Ida5ea89ee66e39b4fddea242dc918b314756d94f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 998493566f5cf7abd9375583e12fe631b226e591
Original-Change-Id: Ieaf346d1c7bf3ecb47a71a6ee4afaa805235cc37
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/249060
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9509
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Looks like Intel has added two more USB 2.0 ports from LynxPoint to
Broadwell, which shifted the port offsets of the USB 3.0 ports behind
them. The USB 2.0 ports are now 0x480 to 0x520 and the 3.0 ones 0x530 to
0x560 (at least according to what my kernel seems to think). The offset
of the first USB 3.0 port is hardcoded and seems to have been copied
over without accounting for this, meaning when we try to operate on all
USB 3.0 ports we actually operate on the last two 2.0 and the first two
3.0 ports instead.
This patch should fix the bug for now. In the future, we might want to
consider dynamically detecting port locations through the Protocol
Capability structures at the end of the XHCI register set instead.
BRANCH=samus
BUG=chrome-os-partner:35320
TEST=TODO
Change-Id: Ifab6e484980fd4cd0daf80ceb292ddced2ab1aea
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 525f359c0b6b95b260add2b4617fd86119d69397
Original-Change-Id: Ic2becf2b043612270909ceef66e7d58efc8fcbe1
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/247351
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: http://review.coreboot.org/9502
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This changes the PCIe replay timeout value in the root ports
to be 0xD to fix correctable AER replay timer timeout errors.
BUG=chrome-os-partner:31551
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I3084cc633da6e9f9a783d923a3fe2c1097e711fd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a64897efc26731fa3896e6d9a413941807296a28
Original-Change-Id: I53d87ad38856fd7de7f3f06a805c9342373bc968
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245359
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9501
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
this code change provides a way to enable 2x refresh rate
in RW image
In baytrail, it enables 2x refresh rate by default
BUG=chrome-os-partner:35210
BRANCH=none
TEST=check the register is set properly on rambi
Change-Id: I2a935b570c564986898b6c2064fc7ad43506dcba
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c740d403708862514be9fa24f56b2764328979eb
Original-Change-Id: I84f33d75ea7ebfea180b304e8ff683884f0dbe8a
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241754
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9498
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add some configuration options that allow tuning the VR for C-state
settings that may be able to reduce noise.
- Add option to enable slow VR ramp rate for C-state exit
- Add variable to configure the minimum C6/C7 voltage
BUG=chrome-os-partner:34771
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I01445d62fbfcf200b787b924d8d72685819a4715
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ed8f355e60292c82791817ae31bff58ac2390a72
Original-Change-Id: I8af75b69c8b55d3e210170ee96f8e22c2fd76374
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241950
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9497
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To ensure that boot flags (legacy, usb, signed-only) are
properly restored from CMOS and used in the first boot after
a battery removal or RTC reset then the VbNv region needs to
be preserved around the cmos_init call.
When using vboot firmware selection and VbNv is stored in CMOS
then that region of CMOS will have been re-initialized by the
time we call cmos_init and reset CMOS if the chipset flag was
set indicating a problem.
BUG=chrome-os-partner:35240
BRANCH=broadwell
TEST=manual testing on samus:
1) boot in dev mode, enable dev_boot_legacy and ensure it works
2) on EC console pulse PCH_RTCRST_L low for a second
3) ensure first boot after RTC reset will still boot legacy mode
4) remove battery for a time
5) ensure first boot after battery is re-inserted will still
boot legacy mode
Change-Id: Ica256bbdcba6d4616957ff38e63914dd15f645c6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 881c7841c95dec392a66eef38a7112c1f385fdfa
Original-Change-Id: I4c33f183ba4b301d68ae31c41fc6663f3be857b0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241529
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9495
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This function will use the next available/free protected range
register to cover the specified region of flash and write
protect it until the next reset.
This will be used by the common MRC cache code to protect the
RW_MRC_CACHE region after it is updated.
In order to communicate to the common NVM code that this function
is defined also enable CONFIG_MRC_SETTINGS_PROTECT variable.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I710c6a69f725479411ed978cc615e1bb78fb42b8
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 25365433be0f190e10a96d9946b8ea90c883b78a
Original-Change-Id: I4a4cd27f9f4a94b9134dcba623f33b114299818f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241129
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9493
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order for some panels to meet spec when the system is put
into S5 by way of power button during firmware (i.e. not by
the OS) then it needs to turn off the backlight and give it
time to turn off before going into S5.
If the OS properly sequences the panel down then the backlight
enable bit will not be set in this step and nothing will happen.
BUG=chrome-os-partner:33994
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: Ic86f388218f889b1fe690cc1bfc5c3e233e95115
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e3c9c131a87bae380e1fd3f96c9ad780441add56
Original-Change-Id: I43c5aee8e32768fc9e82790c9f7ceda0ed17ed13
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240852
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9490
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When disabling PCIe ports skip steps if no card is detected.
This prevents the loop from timing out on each empty slot.
BUG=chrome-os-partner:31424
BRANCH=broadwell
TEST=build and boot on samus, check that this code is
no longer timing out when disabling PCIe ports
Change-Id: I84ee0e0e325784b3af06abe70420c07cf6e13ed2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4d759e2350dd00ceb7df196ac7008729dc1e4cef
Original-Change-Id: Idd88f0f1191a5465a0d8dcca07b5c3a5c5ca8855
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240851
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9489
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The workarounds in ACPI methods for D0/D3 transition that are
used on haswell/LPT do not all apply to broadwell/WPT.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus, test USB functionality and wake
and ensure the device still does into D3 state
Change-Id: Ic3a75f5bf50e826ade7d942b48cfebb75cf976e6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1b54d105957ee80ca34048c42fb8f241731281cf
Original-Change-Id: I877afd51fc6c9b7906e923b893fc31bdf2cd1090
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240850
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9488
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This changes the broadwell graphics init path to only do the delay
before initializing graphics when running chromeos if we are also
going to execute the option rom.
BUG=chrome-os-partner:33671
BRANCH=samus
TEST=build and boot on samus
Change-Id: Idb7d39b22f7f6dc3be6dfbd2fa3cc2e33d78a397
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f7ed93504a74760f16acb8fb3c6c57ac514b7260
Original-Change-Id: I350f85738efe3d17152de4f025adbfd52ae15b95
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228882
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9474
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
HSIOPC/GPIO71 is used to control power to VCCHSIO, VCCUSB3PLL and
VCCSATA3PLL in S0. PCH will drive HSIOPC low when all the high
speed I/O controllers (xHCI, SATA, GbE and PCIe) are idle.
This patch added a few additional PCIe programming steps as required
in 535127 BIOS Writer Guide Rev 2.3.0 to enable this power saving mode.
BUG=none
BRANCH=none
TEST=tested on Paine watching GPIO71 toggling as expected
Change-Id: Ica6954c125ec3129e2659168f1f23dc861ce5708
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e38f9ef57c480ca5ee420020eb80a1adb3c381d3
Original-Change-Id: I88ef125c681c8631e8b887f7ccf017b90b8c0f10
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238580
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9482
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The registers that were used here are for CPT/PPT and not
for HSW/BDW chips.
Update this to update just the Gen3 TX Output Voltage Downscale
Amplitude Adjustment field in the SATA ECR T88.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I94b702dc4a3c98678ba048ff9cfa4a85cc5b1eed
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4c5816cc647b84266751e8a591eb85d7735fee12
Original-Change-Id: I98ec9678938a6675828721d5b57683077f555d21
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238800
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9484
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Added a few bits to set in finalize step from scrubbing BWG
and reference code.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I7b0c4dd3f14c06175c973561760ad1bdafd46fbb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3802aef908849fe6ea2bb0034d884064154ae9da
Original-Change-Id: Ia62055b32be039eef84a0f60f0ba307eb5dce6a1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239958
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9485
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The original code uses L1EXIT_MASK to shift the bit for
PCIe L1 exit latency, the code should use L1EXIT_SHIFT
for bit shifting.
BUG=chrome-os-partner:34037
BRANCH=None
TEST=build and boot on candy, verify B0:D28:F0 + 4Ch [17:15]
set to 010b. Correspond WIFI device performance got improvement.
Signed-off-by: Kevin L Lee <kevin.l.lee@intel.com>
Change-Id: I3ac5b6319b726aa16cdb9678face89022d979517
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 381827e3d92c9e786cd8ebe412586968662fb4be
Original-Change-Id: I8171f80720830cfa76f26778ae31c7590a723b92
Original-Reviewed-on: https://chromium-review.googlesource.com/234673
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using REG_PCI_POLL32 to check if the LINK is active with 50ms timeout.
BRANCH=none
BUG=chromium:431169
TEST=Test on Enguarde, compile ok and boot OS
Change-Id: If98ab4e31d17ec4e62d68b93edcec6d9aee87367
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: cf692ae9aebb43ab46cb07d36b62b300b16be1dc
Original-Change-Id: I490e6ffa40979628edf52a7444808b6d25a6e83d
Original-Signed-off-by: Kevin Hsieh <kevin.hsieh@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/231777
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9478
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some actions are needed and some are not on the way resume from S3.
BRANCH=master
BUG=chrome-os-partner:33025,chrome-os-partner:33796
TEST=Built the image and confimed the boot_mode is correctly
configured.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: If400df94f970a55f3921a5a2df24038d28beb489
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 40e719618ec101235cdb1755933e719abd873239
Original-Change-Id: Ia042ea8c63c2306e9d6a80d8efa66c4fc0722d85
Original-Reviewed-on: https://chromium-review.googlesource.com/229615
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9475
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
I2C bus SDA hold time can be marginal with 60ns value, especially
when there is level shifter on the bus. So program it to 300ns
based on Fast-mode specification, which is between 0 to 900ns.
Apply the same timing for Standard-mode as well.
Refer to original bug on BayTrail chrome-os-partner:28092, this
is to carry forward the fix to Broadwell.
BRANCH=chromeos-2013.04
BUG=chrome-os-partner:33378
TEST=suspend resume test, watch for I2C errors
Change-Id: I93200b141602163903f5c9f52b94013bcf3382a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 72b82a1d5d836594e7d0f95972cc0dc91ae7ff8c
Original-Change-Id: I995d6868a44f2578a6d0b18dd5e8548f3c3cd494
Original-Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226386
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9467
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MEI PCI device has internal logic to flush out the posted writes
before returning completion for non-posted request. When doing a RCBA
write to function disable and then using the PCI CFG RD cycle, need
to do RCBA posting read after writing to it to make sure the write
went through.
As Aaron sugegsted, abstracted function disable path to a common
function.
BUG=chrome-os-partner:33048
TEST=run warm and cold reboot testing
Change-Id: I40d374f1712a9137b3b1eac6bbf2d71078840406
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f10b368e01aae1fc5dda63f7ac0641dd2636c949
Original-Change-Id: I87aa8ccd604446263fc3621c9a01839a5a75b644
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9462
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:31424
TEST=Build a image and run on Samus proto boards to confirm if the
settings are applied correctly.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I9147da86ce26ce7ef1c7034bc3dde0b27b63befa
Original-Commit-Id: 1717505a3fdf41c5972b1c929872577247f9e3b5
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I8138507506771148420a585fd12897a3bfe91916
Original-Reviewed-on: https://chromium-review.googlesource.com/221387
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9463
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
DDI-A should not need re-enabled in the resume path, just
the resume path when we did not execute VBIOS.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus, test suspend+resume
Change-Id: I29d67591ac903bc1d712a956462bcf4a764ef2eb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c3fbeac10f3834a6d848154aa3449672871b13df
Original-Change-Id: Iaf7d083c5c92c42b7a117e2d2c9546ada6bf5f76
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221988
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9461
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to report the GPE that woke the system to the kernel
coreboot needs to keep track of the first GPE wake source and
save it in NVS so it can be returned in \_GPE._SWS method.
This is similar to the saving of PM1 status but needs to go
through all the GPE0_STS registers and check for enabled and
triggered events.
A bit of cleanup is done for areas that were touched:
- platform.asl was not formatted correctly
BUG=chrome-os-partner:8127
BRANCH=samus,auron
TEST=manual:
- suspend/resume and wake from EC event like keyboard:
ACPI _SWS is PM1 Index -1 GPE Index 112 ("special" GPIO27)
- suspend/resume and wake from RTC event:
ACPI _SWS is PM1 Index 10 GPE Index -1 (RTC)
- suspend/resume and wake from power button:
ACPI _SWS is PM1 Index 8 GPE Index -1
- suspend/resume and wake from touchpad:
ACPI _SWS is PM1 Index -1 GPE Index 13
- suspend/resume and wake from WLAN:
ACPI _SWS is PM1 Index -1 GPE Index 10
Change-Id: I574f8cd83c8bb42f420e1a00e71a23aa23195f53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d4e06c7dfc73f2952ce8f81263e316980aa9760f
Original-Change-Id: I9bfbbe4385f2acc2a50f41ae321b4bae262b7078
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220324
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most Baytrail based devices MMIO registers are reported in ACPI
space and the device's PCI config space is disabled. The PCI config
space is required for many "legacy" OSs that don't have the ACPI
driver loading mechanism. Depthcharge signals the legacy boot
path via the SMI 0xCC and the coreboot SMI handler can switch the
device specific registers to re-enable PCI config space.
BUG=chrome-os-partner:30836
BRANCH=None
TEST=Build and boot Rambi SeaBIOS.
Change-Id: I87248936e2a7e026f38c147bdf0df378e605e370
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: dbb9205ee22ffce44e965be51ae0bc62d4ca5dd4
Original-Change-Id: Ia5e54f4330eda10a01ce3de5aa4d86779d6e1bf9
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219801
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
Original-Tested-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/9459
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While upstreaming, some old (or downstream) names sneaked in.
Change-Id: I148fd8f46bc88c38ce1f62efe5771555bd5dcc5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9350
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch aligns broadwell to the new SoC header include scheme.
BUG=None
TEST=Tested with whole series. Compiled Auron and Samus.
Change-Id: I0cb6aa3d17ce28890e586be1c2c7ad16d91dd925
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 23bcaa8110c4b63999c6ebf370045e9bef87ce6e
Original-Change-Id: I613ec0e2b970c75d1f8f7d9bb454bcf11abc78f0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224507
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
This patch aligns baytrail to the new SoC header include scheme.
BUG=None
TEST=Tested with whole series. Compiled Rambi.
Change-Id: I0f0a894f6f33449756582eefa0b50bae545220db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1216a86538517c03a7e5bca547d08ff3dbcaa083
Original-Change-Id: If5d2a609354b3d773aa3d482e682ab97422fd9d5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9363
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
