It's necessary to call spi_init() prior to calling spi_flash_probe()
such that the SPI drivers can do any work required prior to performing
SPI transactions. It could be argued that the drivers should handle
such situations, however the SPI API implementations seem to assume the
callers ensured spi_init() was called before any SPI transactions.
This fixes systems that failed to boot introduced by [1]. Issue tracked
in https://ticket.coreboot.org/issues/67.
[1] I2aa75f88409309e3f9b9bd79b52d27c0061139c8
https://review.coreboot.org/16200
BUG=chrome-os-partner:56151
Change-Id: I2d8d5ac685833521f1efe212b07a4b61ba0d9bc3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16297
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
On many x86 platforms the boot device is SPI which is memory
mapped. However, in order to write to the boot device one needs
to use the SPI api. Therefore, provide a common implementation
of boot_device_rw() which has no mmap() functionality. It only
reads, writes, and erases. This will be used in the existing
infrastructure but in a SPI agnostic way.
Two options are added:
1. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP
2. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY
The former is auto-selected when COMMON_CBFS_SPI_WRAPPER is not
selected. The latter can be used to include the implementation
in the early stages such as bootblock, verstage, and romstage.
BUG=chrome-os-partner:56151
Change-Id: I2aa75f88409309e3f9b9bd79b52d27c0061139c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16200
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
It shouldn't matter if COMMON_CBFS_SPI_WRAPPER is selected to
include the SPI flash support in all stages. Therefore, include
the SPI flash support files in all the stages. While there include
the same set of files for all stages. They were out of sync for
some reason.
BUG=chrome-os-partner:56151
Change-Id: I933335104203315cbbcf965185a7c176974e6356
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16198
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The spi_flash_probe() routine was setting a global varible
unconditonally regardless if the probe was for the boot device
or even if the boot devcie was flash. Moreover, there's no need
to report the SPI information if the boot device isn't even SPI.
Lastly, it's possible that the boot device is a SPI flash, but
the platform may never probe (selecting SPI_FLASH) for the
actual device connected. In that situation don't fill anything
in as no correct information is known.
BUG=chrome-os-partner:56151
Change-Id: Ib0eba601df4d77bede313c358c92b0536355bbd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16197
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Provide the RW boot device operations for the common cbfs
SPI wrapper. The RW region_device is the same as the read-only
one. As noted in the boot_device_rw() introduction patch the
mmap() support should not be used in conjuction with writing
as that results in incoherent operations. That's fine as the
current mmap() support is only used in the cbfs layer which
does not support writing, i.e. no cbfs regions would be
written to with any previous or outstanding mmap() calls.
BUG=chrome-os-partner:56151
Change-Id: I7cc7309a68ad23b30208ac961b1999a79626b307
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16199
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Indicate to the build system that a platform provides support
for a writable boot device. The following will provide the
necessary support:
COMMON_CBFS_SPI_WRAPPER users
soc/intel/apollolake
soc/intel/baytrail
soc/intel/braswell
soc/intel/broadwell
soc/intel/skylake
The SPI_FLASH option is auto-selected if the platform provides
write supoprt for the boot device and SPI flash is the boot
device.
Other platforms may provide similar support, but they do that
in a device specific manner such as selecting SPI_FLASH
explicitly. This provides clearance against build failures
where chipsets don't provide SPI API implementations even
though the platform may use a SPI flash to boot.
BUG=chrome-os-partner:56151
Change-Id: If78160f231c8312a313f9b9753607d044345d274
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16211
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The common boot device spi implementation is very much
specific to SPI flash. As such it should be moved into
that subdirectory. It's still a high-level option but
it correctly depends on BOOT_DEVICE_SPI_FLASH. Additionally
that allows the auto-selection of SPI_FLASH by a platform
selecting COMMON_CBFS_SPI_WRAPPER which allows for culling
of SPI_FLASH selections everywhere.
BUG=chrome-os-partner:56151
Change-Id: Ia2ccfdc9e1a4348cd91b381f9712d8853b7d2a79
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16212
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Make the indication of the boot device being memory mapped
separate from SPI. However, retain the same defaults that
previously existed.
BUG=chrome-os-partner:56151
Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16228
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Almost all boards and chipsets within the codebase assume or
use SPI flash as the boot device. Therefore, provide an option
for the boards/chipsets which don't currently support SPI flash
as the boot device. The default is to assume SPI flash is the
boot device unless otherwise instructed. This falls in line
with the current assumptions, but it also allows one to
differentiate a platform desiring SPI flash support while it not
being the actual boot device.
One thing to note is that while google/daisy does boot with SPI
flash part no SPI API interfaces were ever implemented. Therefore,
mark that board as not having a SPI boot device.
BUG=chrome-os-partner:56151
Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16191
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
This reverts commit a83bbf5854.
This was submitted out of order.
Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16226
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
All flash drivers are automatically included in the build unless
COMMON_CBFS_SPI_WRAPPER was selected. However, there are cases
where these drivers are unnecessary such as certain intel platforms
where spi controller uses hardware sequencing without any ability
to manually probe the device. Therefore, provide an option that the
SoC can set the default value for. The COMMON_CBFS_SPI_WRAPPER
option is still honored by not including all drivers when that
is selected.
BUG=chrome-os-partner:56151
Change-Id: Ie9aa447da450f7c8717545f05cff800139a9e2dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16187
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Make the indication of the boot device being memory mapped
separate from SPI. However, retain the same defaults that
previously existed.
BUG=chrome-os-partner:56151
Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16193
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide more informative messages when CONFIG_ELOG_DEBUG is enabled
as well as more informative error messages in the case of
elog_scan_flash() failing. In the sync path the in-memory buffer is
dumped in before the contents are read back from the non-volatile
backing store and dumped again if the subsequent parsing fails.
BUG=chrome-os-partner:55932
Change-Id: I716adfb246ef6fbefc0de89cd94b3c1310468896
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16184
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Don't verify HOB list pointer or HOBs when FSP returns a reset request.
BRANCH=none
BUG=chrome-os-partner:56159
TEST=Build and run on Galileo Gen2.
Change-Id: I6382f5ff92092623955806ebff340608c4ee156a
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16162
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It cooperates better with the file sorting heuristic.
Change-Id: I1c071243720352970dd2c4c2afed12451f91dcaa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16141
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add fsp_write_line function which may be called by FSP to output debug
serial data to the console.
TEST=Build and run on Galileo Gen2
Change-Id: If7bfcea1af82209dcdc5a9f9f2d9334842c1595e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16129
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add fsp_write_line function which may be called by FSP to output debug
serial data to the console.
TEST=Build and run on Galileo Gen2
Change-Id: Ib01aef448798e47ac613b38eb20bf25537b9221f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16128
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Commit 0d9cd92e (chromeos: Clean up elog handling) removed the
individual elog_init() calls from mainboards that did them and automated
adding certain events through the boot state machine. Unfortunately,
the new code would sometimes not log any specific event at all, and
thereby also never call elog_init() (through elog_add_event()) which
adds the "System boot" event.
We can assume that any board that configures the eventlog at all
actually wants to use it, so let's just add another call to elog_init()
to the boot state machine so we can ensure it gets called at least once.
BRANCH=None
BUG=chrome-os-partner:56001
TEST=Booted Kevin, confirmed that eventlog code runs again.
Change-Id: Ibe7bfc94b3e3d11ba881399a39f9915991c89d8c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16118
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Instead of relying on global state to determine if an error
occurred provide the ability to know if an add or shrink
operation is successful. Now the call chains report the
error back up the stack and out to the callers.
BUG=chrome-os-partner:55932
Change-Id: Id4ed4d93e331f1bf16e038df69ef067446d00102
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16104
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Don't conditionally compile parts of the code. The unused pieces
get culled by the linker, and the #if's just clutter things up.
BUG=chrome-os-partner:55932
Change-Id: Ic18b2deb0cfef7167c05f0a641eae2f4cdc848ee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16102
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There were checks against global variables trying to determine
failing cases of elog_find_flash(). Instead move the checks
into elog_find_flash() and return value indicating failure.
A minimum 4KiB check was added to ensure the eventlog is at
least that size which makes the heuristic checks cleaner.
BUG=chrome-os-partner:55932
Change-Id: I4d9d13148555e05d4f217a10f995831a0e437fc3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16101
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
There were 3 variables indicating the state of the event log
region. However, there's no need to keep track of those
individually. The only thing required is to know is if
elog_scan_flash() failed. There's no other tracking required
beyond that.
BUG=chrome-os-partner:55932
Change-Id: I88ad32091d3c37966a2ac6272f8ad95bcc8c4270
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16100
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
There were multiple paths where writes and erases of the flash
were being done. Instead provide a single place for synchronizing
the non-volatile storage from the mirrored event log. This
synchronization point resides as the very last thing done when
adding an event to the log. The shrinking check happens before
committing the event to non-volatile storage so there's no need
to attempt a shrink in elog_init() because any previous events
committed already honored the full threshold.
BUG=chrome-os-partner:55932
Change-Id: Iaec9480eb3116fdc2f823c25d028a4cfb65a6eaf
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16099
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of treating offsets relative to after the header make
the offsets relative to the in-memory mirror buffer. This
simplifies the logic in that all offsets are treated the same.
It also allows one to remove a global variable.
BUG=chrome-os-partner:55932
Change-Id: I42491e05755d414562b02b6f9ae47f5c357d2f8a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16098
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
A region_device can be used to represent the in-memory mirror
of the event log. The region_device infrastructure has builtin
bounds checking so there's no need to duplicate that. In addition,
it allows for removing much of the math juggling for the buffer
size, etc.
BUG=chrome-os-partner:55932
Change-Id: Ic7fe9466019640b449257c5905ed919ac522bb58
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16097
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
There's only 2 users of checking if the event buffer is cleared
to the EOL value. Each were passing pointers of the in-memory
mirror while also doing calculations for the size to check. Since
the in-memory mirror is one big buffer the only thing required
to know is the offset to start checking from. The check is always
done through the end of the buffer.
BUG=chrome-os-partner:55932
Change-Id: Icd4a7edc74407d6578fc93e9eb533abd3aa17277
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16096
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Instead of taking pointers and back-calculating the
proper offset perform writes in terms of the offsets
within the elog region in flash.
BUG=chrome-os-partner:55932
Change-Id: I5fd65423f5a6e03825c788bc36417f509b58f64d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16095
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
The elog_flash_erase() was only called to erase the entire
elog region in flash. Therefore, drop the parameters and
perform the full erase.
BUG=chrome-os-partner:55932
Change-Id: I6590347ae60d407bc0df141e9196eb70532f8585
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16094
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
There was a check against the next event offset against
the shrink size in elog_shrink(). However, all calls
to elog_shrink() were conditionalized on the next
event offset exceeding the full threshold. The shrink
size is set to the minimum of the full threshold and
a percentage of the elog region size. Therefore, it's
impossible for the next event offset to be less than
the shrink size because full threshold is always greater
than or equal to the shrink size.
BUG=chrome-os-partner:55932
Change-Id: Ie6ff106f1c53c15aa36a82223a235a7ac97fd8c7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16093
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
For the elog shrink case we log the number of bytes shrunk
from the event log. However, when clearing the log the
size recorded was the entire region size including the header
as well as the event region space. To be more consistent
mark the clearing event with the number of bytes actually
cleared out (excluding the header size).
BUG=chrome-os-partner:55932
Change-Id: I7c33da97bd29a90bfe975b1c6f148f181016f13f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16092
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The -b FSP_LOC argument to cbfstool is only valid for the COREBOOT
CBFS. Don't pass that value for all other CBFS regions.
Change-Id: Ib5321e7a7dbee8d26eb558933c8ce3fea50b11fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14641
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If EC_GOOGLE_CHROMEEC is enabled, ensure that the EC is in correct mode
before running memory init. This saves additional memory training
required in recovery path because of reboot later in ramstage.
BUG=chrome-os-partner:54245
Change-Id: Ic71c054afdcd0001cea95563fe513783b56f3e60
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16034
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Although we have already support for the flash chip N25Q128 there is a
similar type available which has the same geometry and opcodes but
unfortunately a slightly different device type ID. While the already
supported N25Q128 has the ID 0xbb18 this one has the ID 0xba18.
To make both types available in the flash support table, use N25Q128A as
the flash name. This name can be found in the datasheet which can be
found here:
https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf
TEST=Booted and verified that MRC cache could be written
Change-Id: I02a47692efb23a9a06a289c367488abd256b8e0c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16061
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the Kconfig value to point to the checklist data files.
TEST=Build and run on Galileo Gen2
Change-Id: I3737b46162214fad139382193de944ec5d175645
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16039
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The TPM version string has become much longer recently, and the
TPM_FW_VER register available on VID 1ae0 devices supports reading in
arbitrary size quantities.
Let's read 50 bytes at a time to reduce the SPI register read wrapper
overhead, and increase the length limit to 300 bytes to accommodate
longer version strings.
TEST=verified on the Kevin device:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: RO_A: 0.0.1/84e2dde7 RO_B:* 0.0.2/13eda43f RW_A:* cr50_v1.1.5005-444ddb7 RW_B: cr50_v1.1.5005-5aac83c
cr50_v1.1.5005-444ddb7 private-cr51:v0.0.66-bd9a0fe tpm2:v0.0.259-8f3d735 cryptoc:v0.0.4-5319e83 2016-07-31 10:58:05 vbendeb@kvasha
Change-Id: Ifaf28c1a9a3990372a9cec108c098edbe50d3243
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/16000
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Choose appropriate debug levels for the various messages in the FSP
driver. Change:
* BIOS_DEBUG --> BIOS_SPEW: Normal FSP driver output level, allows
builder to disable FSP driver output by selecting
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7
* BIOS_ERROR --> BIOS_CRIT: These errors will prevent coreboot and the
payload from successfully booting
TEST=Build and run on Galileo Gen2
Change-Id: Ic3352de2022e16482bf47fc953aedeef8f0c2880
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16003
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a Kconfig value to enable display of FSP header. Move the display
code into a separate module to remove it entirely from the final image.
TEST=Build and run on Galileo Gen2
Change-Id: I7047a9e58e6a6481c8453dbfebfbfe69dc8823d8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16002
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Other SOC platforms need to handle the FspNotify calls in the same way
as Apollo Lake. Migrate the FspNotify calls into the FSP 2.0 driver.
Provide a platform callback to handle anything else that needs to be
done after the FspNotify call.
Display the MTRRs before the first call to fsp_notify.
TEST=Build and run on Galileo Gen2
Change-Id: I1ff327d77516d4ea212740c16c2514c2908758a2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15855
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move all FSP error handling into the FSP 2.0 driver. This removes the
need to implement error handling within the SOC code.
TEST=Build and run on Galileo Gen2
Change-Id: I4d548b4c90d369d3857c24f50f93e7db7e9d3028
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15853
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support to display the HOBs returned by FSP:
* Add Kconfig value to enable HOB display
* Move hob_header, hob_resource and uuid_name structures into util.h
* Move hob_type enum into util.h
* Remove static from the debug utility functions
* Add fsp_ prefix to the debug utility functions
* Declare the debug utility functions in debug.h
* Add HOB type name table
* Add more GUID values
* Add new GUID name table for additional GUIDs
* Add routine to convert EDK-II GUID into a name
* Add SOC specific routine to handle unknown GUID types
* Add routine to convert HOB type into a name
* Add SOC specific routine to handle unknown HOB types
* Add routine to display the hobs
TEST=Build and run on Galileo Gen2
Change-Id: I10606d752859fff0f4f08a5ac03ab129b2c96d1f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15851
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add UPD display support:
* Add a Kconfig value to enable UPD value display
* Add a routine to display a UPD value
* Add a call before MemoryInit to display the UPD parameters
* Add a routine to display the architectural parameters for MemoryInit
* Add a weak routine to display the other UPD parameters for MemoryInit
* Add a call before SiliconInit to display the UPD parameters
* Add a weak routine to display the UPD parameters for SiliconInit
TEST=Build and run on Galileo Gen2.
Change-Id: I35fb8410c0bccf217b32af4b8bbe5ad6671f81f6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15847
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Display the MTRR values in the following locations:
* Before the call to FspMemoryInit to document coreboot settings
* After the call to FspMemoryInit
* Before the call to FspSiliconInit
* After the call to FspSiliconInit
* After the call to FspNotify
* Before the call to FspNotify added in patch 15855
TEST=Build and run on Galileo Gen2
Change-Id: I8942ef4ca4677501a5c38abaff1c3489eebea53c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15849
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If ELOG_BOOT_COUNT is enabled and the boot is not s3 resume, then
increment boot count.
BUG=chrome-os-partner:55473
Change-Id: Ib3e77180bd640ec0424978e73034d7c99cdcba95
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15948
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Disable the chatty FSP behavior for normal builds. Use a Kconfig value
to enable the display of the FSP call entry points, the call parameters
and the returned status for MemoryInit, SiliconInit and FspNotify. The
debug code is placed into drivers/intel/fsp2_0/debug.c.
TEST=Build and run on Galileo Gen2
Change-Id: Iacae66f72bc5b4ba1469f53fcce4669726234441
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15989
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(val & 4) == 1 is always false. Since val & 4 is either zero or
non-zero, just drop the second test (for "== 1").
Validated against the data sheet that this is really the right register,
bit and value.
Change-Id: I627df9a9b4fddfff486689e405f52a3b54135eef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1241864
Reviewed-on: https://review.coreboot.org/16009
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Keep this enabled by default as most x86 platforms could have PCI-e
slots equipped with one of these Intel WiFi adapters.
The Kconfig entries under google boards had no function previously,
the variable was never referenced.
Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15931
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Update the copyright dates in the FSP 2.0 files.
Add a copyright to Kconfig.
TEST=Build and run on Galileo Gen2
Change-Id: I0ad0c5650bde0e31d01a04bcc7d22a19273fe29b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15852
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These files are required by storm and gale boards for enabling elog
support in ramstage.
BUG=chrome-os-partner:55639
Change-Id: I2bbfee2acf2bfe2f896a8619b1276dcea1b87f16
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15893
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If the system is in recovery, store the newly generated MRC data using a
dummy version which is not legit. This ensures that on next normal boot,
new MRC data will be generated and stored.
BUG=chrome-os-partner:55699
Change-Id: Ib13e8c978dc1b4fc8817fab16d0e606f210f2586
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15828
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Quark does not support the rdmsr and wrmsr instructions. In this case
use a SOC specific routine to support the setting of the MTRRs. Migrate
the code from FSP 1.1 to be x86 CPU common.
Since all rdmsr/wrmsr accesses are being converted, fix the build
failure for quark in lib/reg_script.c. Move the soc_msr_x routines and
their depencies from romstage/mtrr.c to reg_access.c.
TEST=Build and run on Galileo Gen2
Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15839
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The removal of ELOG_FLASH_BASE and ELOG_FLASH_SIZE resulted
in the FMAP region for the eventlog to be honored. However,
certain systems seem to have a large eventlog region that
wasn't being used in practice. Because of the malloc() in the
eventlog init sequence a large allocation was now being requested
that can exhaust the heap. Put back the 4KiB capacity until
the resource usage is fixed.
BUG=chrome-os-partner:55593
Change-Id: Ib54b396b48e5be80f737fc3feb0d58348c0d2844
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15835
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Separate NO_XIP_EARLY_STAGES from loading FSP-M into cache-as-RAM.
Quark executes romstage directly from the SPI flash part (in-place),
but loads FSP-M into ESRAM. This split occurs because ESRAM is too
small to hold everything while debugging.
Platforms executing FSP-M directly from the SPI flash need to select
FSP_M_XIP.
TEST=Build and run on Galileo Gen2.
Change-Id: Ib5313ae96dcec101510e82438b1889d315569696
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15848
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build the UART drivers for the postcar stage.
TEST=Build and run on Galileo Gen2
Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15843
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Now that FMAP is a first class citizen in coreboot
there's no reason to have alternate locations for ELOG.
If one wants eventlog support they need to specify the
ELOG entry in the FMAP. The one side effect is that
the code was previously limiting the size to 4KiB
because the default ELOG_AREA_SIZE was 4KiB. However,
that's no longer the case as the FMAP region size is
honored.
Change-Id: I4ce5f15032387155d2f56f0de61f2d85271ba606
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15814
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
FSP 2.0 spec only defines 2 reset request (COLD, WARM) exit codes. The
rest 6 codes are platform-specific and may vary. Modify helper function
so that only basic resets are handled and let SoC deal with the rest.
Change-Id: Ib2f446e0449301407b135933a2088bcffc3ac32a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15730
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Ensure that the stack provided to FSPM doesn't overlap the current
program which is loading the FSPM component. If there is a conflict
that's an error since it could cause the current program to crash.
BUG=chrome-os-partner:52679
Change-Id: Ifff465266e5bb3cb3cf9b616d322a46199f802c7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15746
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
If the system is in recovery mode force a full retrain.
BUG=chrome-os-partner:52679
Change-Id: I4e87685600880d815fe3198b820a10aa269baf37
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15745
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Utilizing the FSP revision while saving the memory training data is
important because it means when the FSP is updated the memory training
is redone. The previous implementation was just using '0' as a revision.
Because of that behavior a retrain would not have been done on an FSP
upgrade.
BUG=chrome-os-partner:52679
Change-Id: I1430bd78c770a840d2deff2476f47150c02cf27d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15744
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The FSPS component loading was just loading to any memory address
listed in the header. That could be anywhere in the address space
including ramstage itself -- let alone corrupting the OS memory on
S3 resume. Remedy this by loading and relocating FSPS into cbmem.
The UEFI 2.4 header files include path are selected to provide the
types necessary for FSP relocation.
BUG=chrome-os-partner:52679
Change-Id: Iaba103190731fc229566a3b0231cf967522040db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15742
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: John Zhao <john.zhao@intel.com>
The previously implementation for loading the FSPM component didn't
handle platforms which expects FSPM to be XIP. For the non-XIP case,
romstage's address space wasn't fully being checked for overlaps.
Lastly, fixup the API as the range_entry isn't needed any longer.
This API change requires a apollolake to be updated as well.
BUG=chrome-os-partner:52679
Change-Id: I24d0c7d123d12f15a8477e1025bf0901e2d702e7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15741
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The current FSP component loading mechanism doesn't handle all the
requirements actually needed. Two things need to be added:
1. XIP support for MemoryInit component
2. Relocating SiliconInit component to not corrupt OS memory.
In order to accommodate those requirements the validation
and header initialization needs to be a separate function.
Therefore, provide fsp_validate_component() to help achieve those
requirements.
BUG=chrome-os-partner:52679
Change-Id: I53525498b250033f3187c05db248e07b00cc934d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15740
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Instead of performing the same tasks in the chipset code move
the common sequences into the FSP 2.0 driver. This handles the
S3 paths as well as saving and restoring the memory data. The
chipset code can always override the settings if needed.
BUG=chrome-os-partner:52679
Change-Id: I098bf95139a0360f028a50aa50d16d264bede386
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15739
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The amount of reserved memory just below the DRAM limit in
32-bit space is defined in the FSP 2.0 specification within
the FSPM_ARCH_UPD structure. There's no need to make the
chipset code set the same value as needed for coreboot.
The chipset code can always change the value if it needs
after the common setting being applied.
Remove the call in soc/intel/apollolake as it's no longer
needed.
BUG=chrome-os-partner:52679
Change-Id: I69a1fee7a7b53c109afd8ee0f03cb8506584d571
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15738
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The gcc compiler treats sizeof(void) == 1. Therefore requesting
a 1 byte reservation in cbmem and writing a pointer into the
buffer returned is wrong. Fix the size of the request to be
32-bits because FSP 2.0 is in 32-bit space by definition. Also,
since the access to the field happens across stage boundaries
it's important to ensure fixed widths are used in case a later
stage has a different pointer bit width.
BUG=chrome-os-partner:52679
Change-Id: Ib4efc7d5369d44a995318aac6c4a7cfdc73e4a8c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15737
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In case of elog not being stored in CBMEM, calculate flash offset by
using rdev_mmap instead of assuming that the entire flash is mapped just
below 4GiB. This allows custom mappings of flash to correctly convert
the flash offset to mmap address.
BUG=chrome-os-partner:54186
TEST=Verified behavior on reef. mosys able to read out the elog correctly.
Change-Id: I3eacd2c9266ecc3da1bd45c86ff9d0e8153ca3f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15722
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The SLEEP_STATE_x definitions in the chipsets utilizing
FSP 1.1. driver have the exact same values as the ACPI_Sx
definitions. The chipsets will be moved over subsequently,
but updating this first allows the per-chipset patches
to be isolated.
BUG=chrome-os-partner:54977
Change-Id: I383a9a732ef68bf2276f6149ffa5360bcdfb70b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15665
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
This driver enables the usage of an external RTC chip PCF8523 which is
connected to the I2C bus. The I2C address of this device is fixed.
One can change parameters in device tree so that the used setup can be
adapted in device tree to match the configuration of the device on the
mainboard.
Change-Id: I2d7e161c9e12b720ec4925f1acfd1dd8ee6ee5f5
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15641
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Some devices allow to retrieve firmware version by reading the same 4
byte register repeatedly until the entire version string is read.
Let's print out TPM firmware version when available. Just in case
something goes wrong limit the version string length to 200 bytes.
CQ-DEPEND=CL:355701
BRANCH=none
BUG=chrome-os-partner:54723
TEST=built the new firmware and ran it on Gru, observed the following
in the coreboot console log:
Connected to device vid:did:rid of 1ae0:0028:00
Firmware version: cr50_v1.1.4792-7a44484
Original-Commit-Id: 1f54a30cebe808abf1b09478b47924bb722a0ca6
Original-Change-Id: Idb069dabb80d34a0efdf04c3c40a42ab0c8a3f94
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355704
Original-Reviewed-by: Scott Collyer <scollyer@chromium.org>
Squashed with:
tpm: use 4 byte quantities when retrieving firmware version
The CR50 device is capable of reporting its firmware version in 4 byte
quantities, but the recently introduced code retrieves the version one
byte at a time.
With this fix the version is retrieved in 4 byte chunks.
BRANCH=none
BUG=none
TEST=the version is still reported properly, as reported by the AP
firmware console log:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: cr50_v1.1.4804-c64cf24
localhost ~ #
Original-Commit-Id: 3111537e7b66d8507b6608ef665e4cde76403818
Original-Change-Id: I04116881a30001e35e989e51ec1567263f9149a6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356542
Original-Reviewed-by: Andrey Pronin <apronin@chromium.org>
Change-Id: Ia9f13a5bf1c34292b866f57c0d14470fe6ca9853
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15573
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The "PC Client Protection Profile for TPM 2.0" document defines SPI
bus addresses for different localities. That definition is not honored
in the cr50 implementation, this patch fixes it: locality zero
register file is based off 0xd40000.
BRANCH=none
BUG=chrome-os-partner:54720
TEST=with the fixed cr50 image and the rest of TPM2 initialization
patches applied factory initialization sequence on Gru succeeds.
Change-Id: I49b7ed55f0360448b9a6602ebd31a3a531608da3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 43344fff5d58ec235e50030413fc38c98dd0a9a1
Original-Change-Id: I2de6fa6c05d3eca989d6785228d5adde1f2a7ab7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355620
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://review.coreboot.org/15568
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Add a device driver to generate the device and required properties
into the SSDT.
This driver uses the ACPI Device Property interface to generate the
required parameters into the _DSD table format expected by the kernel.
This was tested on the reef mainboard to ensure that the SSDT contained
the equivalent parameters that are provided by the current DSDT object.
Change-Id: Ia809e953932a7e127352a7ef193974d95e511565
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15538
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There is a second ACPI _DSD document from the UEFI Forum that details
how _DSD style tables can be nested, creating a tree of similarly
formatted tables. This document is linked from acpi_device.h.
In order to support this the device property interface needs to be
more flexible and build up a tree of properties to write all entries
at once instead of writing each entry as it is generated.
In the end this is a more flexible solution that can support drivers
that need child tables like the DA7219 codec, while only requiring
minor changes to the existing drivers that use the device property
interface.
This was tested on reef (apollolake) and chell (skylake) boards to
ensure that there was no change in the generated SSDT AML.
Change-Id: Ia22e3a5fd3982ffa7c324bee1a8d190d49f853dd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15537
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add driver code to initialize Siemens NC FPGA as PCI device.
Beside some glue logic it contains a FAN controller and
temperature monitor.
Change-Id: I2cb722a60081028ee5a8251f51125f12ed38d824
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15543
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The function mainboard_get_mac_address() is used to get a MAC address
for a given i210 PCI device. Instead of passing pure numbers for PCI
bus, device and function pass the device pointer to this function. In
this way the function can retrieve the needed values itself as well as
have the pointer to the device tree so that PCI path can be evaluated
there.
Change-Id: I2335d995651baa5e23a0448f5f32310dcd394f9b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15516
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The upstream kernel driver is not using the of-style naming for
sdmode-gpio so remove the maxim prefix, and remove the duplicate
entry for the sdmode-delay value as well.
Also fix the usage of the path variable, since the device path uses
a static variable it can't be assigned that early or it will be
overwritten by later calls.
This results in the following output for the _DSD when tested on
reef mainboard:
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package (0x02)
{
Package (0x02)
{
"sdmode-gpio",
Package (0x04)
{
\_SB.PCI0.HDAS.MAXM,
Zero,
Zero,
Zero
}
},
Package (0x02)
{
"sdmode-delay",
Zero
}
}
})
Change-Id: Iab33182a5f64c89151966f5e79f4f7c30840c46f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15514
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Any FSP API call may request a reset. This is indicated in API function
return code. Add trivial reset handler code.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: Ieb5e2d52ffdaf3c3ed416603f6dbb4f9c25a1a7b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15334
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To fully define TPM attachment to a SPI interface both bus and CS
(chip select) settings are required. Add the missing CS configuration
option.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to compile in
and run TPM2 SPI driver.
Change-Id: If297df8e5b9526f156ed1414eb9db317d6af5b33
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353913
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15299
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This introduces a SPI TPM driver compliant with the TCG issued "TPM
Profile (PTP) Specification Revision 00.43" which can be found by
googling its title.
The driver implements both the hardware flow control protocol and the
TPM state machine.
The hardware flow control allows to map SPI based TPM devices to the
LPC address space on x86 platforms, on all other platforms it needs to
be implemented in the driver software.
The tis layer is somewhat superficial, it might have to be expanded
later.
A lot more implementation details can be found in the code comments.
Also, it is worth mentioning that this is not a complete version of
the driver: its robustness needs to be improved, delay loops need to
be bound, error conditions need to propagate up the call stack.
BRANCH=none
BUG=chrome-os-partner:52132, chrome-os-partner:50645, chrome-os-partner:54141
TEST=with the rest of the patches applied coreboot is able complete
Chrome OS factory initialization of the TPM2 device.
Change-Id: I967bc5c689f6e6f345755f08cb088ad37abd5d1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5611c6f7d7fe6d37da668f337f0e70263913d63e
Original-Change-Id: I17d732e66bd231c2289ec289994dd819c6276855
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/350124
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15298
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Tested-by: build bot (Jenkins)
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1
Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349850
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15294
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
This variable name was changed in chip.h but not the consumer
and it was submitted before it was caught.
Change-Id: I7c492b588b2fd854a9eeac36029a46da324a7b1b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15109
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Without RELOCATABLE_RAMSTAGE have WB cache large enough
to cover the greatest ramstage needs, as there is no benefit
of trying to accurately match the actual need. Choose
this to be bottom 16MiB.
With RELOCATABLE_RAMSTAGE write-back cache of low ram is
only useful for bottom 1MiB of RAM as a small part of this gets used
during SMP initialisation before proper MTRR setup.
Change-Id: Icd5f8461f81ed0e671130f1142641a48d1304f30
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15249
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP methods may require reset under certain conditions. That is indicated
by returning specific return code. Add the missing return status codes.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I460353c5f835548a98255bd3e11dbfd08260ea52
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15185
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Previous FSP implementations in coreboot have included FspUpdVpd.h
directly, along with with efi headers. Instead of taking that
approach in FSP 2.0, we provide a semantic patch that, with minimal
modifications, makes FspUpdVpd.h easier to include in coreboot, and
eliminates reliance on external headers and definitions.
Change-Id: I0c2a6f7baf6fb50ae22b64e08e653cfe1aefdaf9
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13331
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Now that there is a better way of finding optional routines, make the
weak routines quiet so that it may be used for the optional
implementation.
TEST=Build and run on Galileo Gen2
Change-Id: Ic58c7de216394f80aee3a78dd08bd4682783be42
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15043
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot. This processing builds a set of implemented
(done) routines which are marked green in the table. The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table. The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).
Add some Kconfig values:
* CREATE_BOARD_CHECKLIST - When selected creates the checklist file
* MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
Documenation directory
* CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
* <stage>_complete.dat - Lists all of the weak routines
* <stage>_optional.dat - Lists weak routines which may be optionally
implemented
TEST=Build with Galileo Gen2.
Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Update the weak functions for the MRC cache.
TEST=Build and run on Galileo Gen2
Change-Id: I54a1252cfff1a2f68b163f0feb65e2bceb37f6a9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15042
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The Maxim Integrated 98357A codec is an I2S slave device that has no
control channel for configuration and instead provides a GPIO that is
used for channel selection and power down. This means it does not fit
into a bus hierarchy easily and is instead represented as a generic
device and found with a static bus scan using the devicetree.
This driver provides configuration options for passing the "sdmode" GPIO
descriptor as well as a second option for "sdmode delay" which can
configure the timing of the sdmode toggling in relation to the I2S
channel output.
In addition an GPIO can be provided to indicate to the driver whether
this device is present or not. This can be used for board designs that
may have different codec possibilities that are selected by HW strap.
Sample usage for this device driver:
device pci 1f.3 on
chip drivers/generic/max98357a
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_C6)"
register "sdmode_delay" = "100"
device generic 0 on end
end
end
Will result in the following code in the SSDT:
Scope (\_SB.PCI0.HDAS) {
Device (MAXM) {
Name (_HID, "MX98357A")
Name (_UID, Zero)
Name (_DDN, "Maxim Integrated 98357A Amplifier")
Method (_STA) { Return (0xF) }
Name (_CRS, ResourceTemplate () {
GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0, ResourceConsumer)
})
Name (_DSD, Package () {
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "maxim,sdmode-gpio", \_SB.PCI0.HDAS.MAXM, 0, 0, 0 }
Package () { "maxim,sdmode-delay", 100 }
Package () { "sdmode-delay", 100 }
}
})
}
}
Change-Id: Ia0bafe49bea9bbe4a3cc0f9f9cdb6f6390da57b5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15017
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds a generic I2C driver that can be described in the devicetree
and used to generate ACPI objects in the SSDT based on the information
provided in the config registers.
The I2C bus can be configured and the device can provide an interrupt and
wake capability to the OS. A configuration option allows for a GPIO to
be provided that will be checked to determine if the device is preset on
the board before including it in the generated SSDT.
The driver is generic enough to be used for basic I2C devices that do
not have special configuration needs such as touchpads, touchscreens,
sensors, some audio codec/amplifiers, etc.
Sample usage for a touchpad device:
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = "ELAN Touchpad"
register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15.0 on end
end
end
Will result in the following code in the SSDT:
Scope (\_SB.PCI0.I2C1) {
Device (D015) {
Name (_HID, "ELAN0000")
Name (_UID, 0)
Name (_S0W, 4)
Name (_PRW, Package () { 5, 3 })
Method (_STA) { Return (0x0f) }
Name (_CRS, ResourceTemplate () {
I2cSerialBus (0x15, ControllerInitiated, 400000, AddressingMode7Bit,
"\\_S.PCI0.I2C1", 0, ResourceConsumer)
Interrupt (ResourceConsumer, Edge, ActiveLow) { 51 }
})
}
}
Change-Id: Ib32055720835b70e91ede5e4028ecd91894d70d5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15016
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Intel WiFi devices that support wake-on-wifi need to declare a Power
Resource for this wake pin. Typically this has been done with a
static declaration in the DSDT for each mainboard. By adding it to
the existing intel/wifi driver it can be done based on a
configuration register in the devicetree.
Additionally the WiFi regulatory domain can be set in the SSDT
directly instead of needing to use NVS to pass the value to the DSDT.
Also add device IDs for Wilkins Peak 2 and Stone Peak 2 devices that
are found on Chromebooks, and clean up a long line and some comment
formatting.
This was tested by booting on an HP Chromebook 13 device and comparing
that the output in the SSDT matches what used to be in the DSDT. The
WRDD value is read from VPD, if present, not from devicetree.cb.
Additionally the case where CONFIG_DRIVERS_INTEL_WIFI is enabled but
the wifi device is not described in devicetree.cb is tested to ensure
it still generates the AML but does not include the _PRW wake pin.
Example:
devicetree.cb:
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end
VPD:
"region"="us"
SSDT.dsl:
Scope (\_SB.PCI0.RP01) {
Device (WIFI) {
Name (_UID, Zero)
Name (_DDN, "Intel WiFi")
Name (_ADR, 0x00000000)
Name (_PRW, Package () { 16, 3 })
Name (WRDD, Package () {
Zero,
Package () {
0x00000007,
0x00004150
}
})
}
}
Change-Id: I8b5c916f1a04742507dc1ecc9a20c19d3822b18c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15019
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a universal hybrid graphics driver compatible with
all supported lenovo devices.
Hybrid graphics allows to connect the display panel to
either of one GPUs.
As there are only two GPUs one GPIO needs to be toggled.
In case the discrete GPU is activated the panel is routed to it.
On deactivation the panel is routed to the integrated
GPU.
On lenovo laptops the dGPU is always connected to PEG10 and it is
save to disable the PEG slot on dGPU deactivation.
Use common gpio.c for southbridge I82801IX.
Tested on Lenovo T520 using Nvidia NVS 5200m.
Removed Lenovo T430s from the list of supported devices,
as the T430s only supports "muxless Optimus".
Depends on change id:
Iccc6d254bafb927b6470704cec7c9dd7528e2c68
Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8
I8bd981c4696c174152cf41caefa6c083650d283a
Iaf0c2f941f2625a5547f9cba79da1b173da6f295
I994114734fa931926c34ed04305cddfbeb429b62
Change-Id: I9b80b31a7749bdf893ed3b772a6505c9f29a56d1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/12896
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
The Nuvoton NAU8825 audio codec is an I2C device that has a number of
tunable parameters that can be provided to the kernel device driver for
basic configuration and optimal operation.
The configuration options are exposed to devicetree as registers and then
presented as Device Properties via ACPI to the operation system.
This sample configuration in devicetree:
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "sar_threshold_num" = "2"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1c"
device i2c 1a on end
end
end
Will generate the following code in the SSDT, trimmed for this commit
message as there are more properties that can be configured:
Scope (\_SB.PCI0.I2C4)
{
Name (_HID, "10508825")
Name (_UID, Zero)
Name (_DDN, "Nuvoton NAU8825 Codec")
Method (_STA) { Return (0xF) }
Name (_CRS, ResourceTemplate () {
I2cSerialBus (0x1A, ControllerInitiated, 0x61A80, AddressingMode7Bit,
"\_SB.PCI0.I2C4", 0, ResourceConsumer)
Interrupt (ResourceConsumer, Level, ActiveLow) { 0x3A }
})
Name (_DSD, Package () {
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bff4aa301"),
Package () {
Package () { "nuvoton,jkdet-enable", 1 },
Package () { "nuvoton,sar-threshold-num", 2 },
Package () { "nuvoton,sar-threshold", Package () { 0x0c, 0x1c } }
}
})
}
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I480d72daf5ac3dded9b1cbb5fbc737b9dfde3834
Reviewed-on: https://review.coreboot.org/15015
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
One thing that is vital to this patch is the MAC address setting
in case the EEPROM/efuse is unconfigured.
Linux now recognises the default MAC address on GA-G41M-ES2L which
does rely on the default bios settings for the MAC address.
Change-Id: I32e070b545b4c6369686a7087b7ff838d00764e3
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/14927
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
By design, FSP will send POST codes to port 80. In this case we have
both coreboot and FSP pushing post codes, which may make debugging
harder. In order to get a clear picture of where FSP execution begins
and ends, send post codes before and after any call to the FSP blobs.
Note that sending a post code both before and after is mostly useful
on chromeec enabled boards, where the EC console will provide a
historic list of post codes.
Change-Id: Icfd22b4f6d9e91b01138f97efd711d9204028eb1
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14951
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Simplify the union references to enable Coverity to properly process
the routine.
Found-by: Coverify CID 1349854
TEST=Build and run on Galileo Gen2
Change-Id: I667b9bc5fcde7f68cb9b4c8fa85601998e5c81ff
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14870
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Coverity does not like the use of for/break, switch to using returns
instead.
Found-by: Coverity CID 1349855
TEST=Build and run on Galileo Gen2
Change-Id: I4e5767b09faefa275dd32d3b76dda063f7c22f6f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Don't allow an array index of 2 to be processed by the code referencing
the array.
Found-by: Coverity CID 1353337
TEST=None
Change-Id: I586ca14416a6e40971f8f6f4066fbdb4908ca688
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14868
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
FSP 2.0 uses the same relocate logic as FSP 1.1. Thus, rename
fsp1_1_relocate to more generic fsp_component_relocate that can be
used by cbfstool to relocate either FSP 1.1 or FSP 2.0
components. Allow FSP1.1 driver to still call fsp1_1_relocate which
acts as a wrapper for fsp_component_relocate.
Change-Id: I14a6efde4d86a340663422aff5ee82175362d1b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Currently, convert_fsp assumes that the component is always XIP. This
is no longer true with FSP 2.0 and Apollolake platform. Thus, add the
option -y|--xip for FSP which will allow the caller to mention whether
the FSP component being added is XIP or not. Add this option to
Makefiles of current FSP drivers (fsp1_0 and fsp1_1).
Change-Id: I1e41d0902bb32afaf116bb457dd9265a5bcd8779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Allow the platform to override the input clock for the UART by
implementing the routine uart_platform_refclk and setting the Kconfig
value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk
routine which is disabled when UART_OVERRIDE_REFCLK is selected. This
works around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Allow the platform to override the input clock divider by adding the
uart_input_clock_divider routine. This routine combines the baud-rate
oversample divider with any other input clock divider. The default
routine returns 16 which is the standard baud-rate oversampling value.
A platform may override this default "weak" routine by providing a new
routine and selecting UART_OVERRIDE_INPUT_CLOCK_DIVIDER. This works
around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Ieb6453b045d84702b8f730988d0fed9f253f63e2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14611
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Extend the serial port description to include the input clock frequency
and a payload specific value.
Without the input frequency it is impossible for the payload to compute
the baud-rate divisor without making an assumption about the frequency.
This breaks down when the UART is able to support multiple input clock
frequencies.
Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device
being used as the console UART. Specify this value as zero when the
UART is not on the PCI bus. Otherwise specify the device using bus,
device and function along with setting the valid bit.
Currently the only payload to consume these new fields is the EDK-II
CorebootPayloadPkg.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14609
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ifde289ec004f5d54d5df32011c87e49470e2bb5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 613b5ae45f7b8325863d8be492a451e6d076e293
Original-Change-Id: I93386e058a60b5c9b61d89607cf8c6e0de6a21ca
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334522
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Before multi-CBFS support was added, x86 platforms cached their
ramstage in TSEG so that it could be re-used on the resume
path. However, more resources/assets are being put in cbfs that are
utilized during ramstage. Just caching ramstage does not mean that
correct cbfs region is used for all the data. Thus, provide an option
to allow platforms to skip caching any component for resume.
Change-Id: I0e957a6b859cc7d700aaff67209a17c6558be5de
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14636
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
decode_edid either gets EDID_LENGTH bytes or (in the extended case),
2*EDID_LENGTH.
See that this is reflected in its size argument.
Change-Id: If6c76358db4e9ee01c2bd2dbdd5948c61b7aa5bc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14698
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Due to missing braces (that went undetected because of the
indentation), I584189d9fcf7c9b831d9c020ee7ed59bb5ae08e8
CMOS: add set_option() only takes the last changed byte into regard
when determining whether the checksum needs to be updated.
This bug went undetected for 5 years.
Change-Id: I47cedc801a60959386dfdcda3a13b8e3162a7ecb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14616
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Idae5ee5f1f48d904b704abe618165c0bec839979
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14048
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The MRC cache API has absolutely no reason to modify the data it is
asked to stash. Reflect that by taking all "data" parameters as
const void *.
Change-Id: I7a14ffd7d5726aa9aa5db81df82c06e7f87b9d9f
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14250
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
The skylake-based Chromebooks use a separate verstage which runs
just after bootblock and prior to romstage. However, that
config is not enabled for coreboot.org so when
C_ENVIRONMENT_BOOTBLOCK changes were done it wasn't observed
that the Chromebook config failed because 2 _start symbols
were present. Remedy this failure by using the common
car_stage_entry symbol for taking over control flow.
Change-Id: I3f29b90ba8e3786b2106a34e49e6d1f9831dcc7c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14549
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Switch all types to uint8_t and the like instead of u8.
Change-Id: Ia12c4ee9e21e2d3166c2f895c819357fa2ed9a94
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14515
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The previous commit removed Kconfig, but not Makefile.inc
Change-Id: If46a0a3e253eea9d286d8ab3b1a6ab67ef678ee4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14419
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I3cf32ec58ba40db11fae3dda6dcb2375002e7cb4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14052
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Ide0d48405d85ea2e889916f778e1556287651707
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14057
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I8cf021ea5baff05eb5f84cc014612084afe3f858
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14053
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Iba43630208be02603f4e0de5f62047bb3d23863a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14054
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I6e30a7be510c66fb1aa88314861d95f8ebe80377
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14056
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Ia210e6832c18270043c0cb21b4881d9c802f3b2b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I40373768595a085bba9a5c934794e128f396828b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14059
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I7a053ac1d8ecc3e443e91daeb406bae0b8c13323
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14060
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Ifc32b251677f8b75ffca224c0c900e9c34c756b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14051
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I2cd6c1f1712e77ff98a9557519fb8efeeb400a69
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14049
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I1313797d60925cc0627987936199e62073c264d7
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14061
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Iac737e15db512eac96cd16fe14983b66a03876bb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14050
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Also, fix up the following driver subdirectories by switching
to the src/drivers/[X]/[Y]/ scheme as these are hard requirements
for the main change:
* drivers/intel
* drivers/pc80
* drivers/dec
Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14047
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This adds boot mode constants. They match EDK2 found in PiBootMode.h
constants but are part of FSP2.0 spec.
Change-Id: I16ee90ff372d252ddc042ca89c1e5912ab041616
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14249
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Our EDID code had always been aligning the framebuffer's
bytes_per_line (and x_resolution dependent on that) to 64. It turns out
that this is a controller-dependent parameter that seems to only really
be necessary for Intel chipsets, and commit 6911219cc (edid: Add helper
function to calculate bits-per-pixel dependent values) probably actually
broke this for some other controllers by applying the alignment too
widely.
This patch makes it explicitly configurable and depends the default on
ARCH_X86 (which seems to be the simplest and least intrusive way to make
it fit most cases for now... boards where this doesn't apply can still
override it manually by calling edid_set_framebuffer_bits_per_pixel()
again).
Change-Id: I1c565a72826fc5ddfbb1ae4a5db5e9063b761455
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14267
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to not muddle arch vs chipset implementations provide
a generic prog_segment_loaded() which calls platform_segment_loaded()
and arch_segment_loaded() in that order. This allows the arch variants
to live in src/arch while the chipset/platform code can implement
their own.
Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14214
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
In order for the platform code to handle situations where
special actions are required after a piece of code is loaded
use arch_segment_loaded() to signal to the platform code
that the component is fully loaded into memory.
Change-Id: I119cfc9913f15eb4968fe5bf6a56589e2c53f2d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14211
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The log shows the following error on systems that use the
native gfx init. The error isn't shown using the VBIOS blob:
GET_VBIOS: aa55 8086 0 3 0
VBIOS not found.
Don't shift the class-code, as it's already shifted by the PCI layer.
Tested-on: x220
Tested-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I69018940dd51966b45774e0576a1380f90716dce
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14188
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
For platforms that do verification of memory init (and have verstage
execute before romstage) FSP should not attempt to re-initialize the
TPM again in romstage as it has already been done.
BUG=chrome-os-partner:50633
BRANCH=glados
TEST=boot and resume on chell and ensure TPM is not re-initialized
Change-Id: Ied6f39dc8dacdbc3d76070b6135de2308196ff53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fefd4d4b3fde4c7fe4b6de304790914b7a2f87d8
Original-Change-Id: I60a2e4e2d73270697218f094527e09d444e6ab56
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332433
Original-(cherry picked from commit 2de1fd57fe1db7960e0bb86c64dccf827fa55742)
Original-Reviewed-on: https://chromium-review.googlesource.com/332299
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14106
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Coreboot and most payloads support three basic pixel widths for the
framebuffer. It assumes 32 by default, but several chipsets need to
override that value with whatever else they're supporting. Our struct
edid contains multiple convenience values that are directly derived from
this (and other properties), so changing the bits per pixel always
requires recalculating all those dependents in the chipset code. This
patch provides a small convenience wrapper that can be used to
consistently update the whole struct edid with a new pixel width
instead, so we no longer need to duplicate those calculations
everywhere.
BUG=None
TEST=Booted Oak in all three pixel widths (which it conveniently all
supports), confirmed that images looked good.
Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14158
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Sort out some style issues that were identified by Paul.
Change-Id: I9ed946ae613c87234f8c9824eb14b8d28909dfcf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14064
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the VBT was provided to the FSP GOP driver then graphics init
will be done as part of SiliconInit step and we can mark that
when it is completed.
This will result in the "oprom" flag being set properly in the
coreboot gpio table and the netboot firmware will have video.
[pg: avoided conflict with Quark that comes without
silicon_init_params.GraphicsConfigPtr]
BUG=chrome-os-partner:50864
BRANCH=glados
TEST=boot image.net.bin on chell and get working graphics
without being setuck in a reboot loop thinking graphics needs
to be started when it already has been.
Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331301
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240)
Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5
Original-Reviewed-on: https://chromium-review.googlesource.com/331355
Reviewed-on: https://review.coreboot.org/13986
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
The SST25VF064C doesn't support the auto incrementing write which
all other supported SST chips support. Allow the chips to select
their write method.
Change-Id: Ic088d35461a625469ee6973d1267d7dd11963496
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14000
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i440BX boards in the chipset.
Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13781
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
There's no need to use a struct resource type for
fsp_find_reserved_memory(). struct resource is mainly associated
with a device and that memory is added to cbmem after memory init.
Other uses ins FSP 2.0 just use struct range_entry. Use that
instead for consistency.
Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13960
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The FSP 2.0 implementation doesn't handle FSP modules for
SoCs that are required to be XIP. There is no notion of
"loading" in that situation where one should be copying
anything anywhere.
Additionally, the loading code does not handle overlaps within
the current running program which is doing the loading.
Change-Id: Ide145581f1dd84efb73a28ae51b3313183fa127a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13959
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Add an ACPI file containing a generic WRDD method that is used
by Intel wireless kernel drivers to determine the country code
to be used for regulatory domain configuration of the wireless
radios.
This requires an NVS variable called 'CID1' to provide an
ISO-3166-2 alpha-2 country code or it will just return 0 instead.
This is implemented as a bare method because this needs to be
included directly into the wifi device that is defined by the
mainboard as it may have board-specific settings like _PRW that
need to be provided as well.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Change-Id: I27a5e27f65d05ff62a0e79a87a32c1ef0c5d0ef3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 2da0cf76ca3cc5e3dfbc4a0859733523de780cf5
Original-Change-Id: I9d83c3938cceafc77ef8747a5c47f586ee84437e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329294
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a few helper functions that are intended to assist setting
up framebuffer.
Change-Id: Id8ed4de1f9de32e9222b0120c15a6d33676346e7
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP creates hand-off-blocks (HOBs) to exchange information with
coreboot. This adds a set of utilities to parse HOBs and extract
some useful information from them.
Change-Id: If55dbfaa021cd68c312813a5532a36c68806dbbc
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13801
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds Notify Phase API. This is an important call that is used
to inform FSP runtimes of different stages of SoC initializations
by the coreboot.
Change-Id: Icec770d0c1c4d239adb2ef342bf6cc9c35666e4d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13800
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds SiliconInit API that is needed to be called after memory
has been trained. This call is needed to let the blob do various
initialisations of IP blocks.
Change-Id: I35e02f22174c8392e55ac869265a19c4309932e5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13799
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds implementation of fsp_memory_init() that is used to train
memory.
Change-Id: I72268aaa91eea7e4d4f072d70a47871d74c2b979
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13798
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If the TPM code isn't getting built in, the Kconfig symbol
CONFIG_TPM_TIS_BASE_ADDRESS doesn't exist. This ends up creating
an invalid operating region in the ACPI tables, causing a bluescreen
in windows.
This should fix this issue:
https://ticket.coreboot.org/issues/35
"commit 85a255fb (acpi/tpm: Gracefully handle missing TPM module)
breaks Windows"
Change-Id: I32e0e09c1f61551a40f4842168f556d5e1940d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Those options have no effect or lead to compile error on ARM due
to fundamental incompatibilities. Add proper "depends on" clauses
to hide them.
Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13904
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This adds a set of utility functions that help load and identify
FSP blobs.
Change-Id: I1d23f60fd1dc8de7966142bcd793289220a1fa5e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13797
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This adds important header files that specify calling interface between
coreboot and FSP.
Change-Id: I393601c91e3c3f630e0fc899f1140ecefed8ecba
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet
v1.05.
Change-Id: I05c3c7877015d95eb8d512f7410604b9af043b26
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13807
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When TPM support is enabled, verify the TPM_DID_VID field is not
all zeroes or all ones before returning 0xf in the _STA method.
This avoids these kernel errors when no module is installed:
[ 3.426426] tpm_tis 00:01: tpm_transmit: tpm_send: error -5
[ 3.432049] tpm_tis: probe of 00:01 failed with error -5
Change-Id: Ia089d4232e0986b3bc635d346e68d982e8aecd44
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/13713
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
The intend is to seek upgraded microcode in RW section and load it
before Fsp memoryinit, to ensure any goodness in the microcode update,
especially related to memory configuration, can be applied earlier.
BUG=chrome-os-partner:50132
BRANCH=glados
TEST=Built and boot on kunimintus. Verified microcode gets reloaded.
Boot time impact is very minor.
CQ-DEPEND=CL:327170
Change-Id: I1a5df1d1efa25fb256743dca6a661c828263ec7c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d7f700c1876e53194748d1d1c66637b9419b7086
Original-Change-Id: I7083ec6305af9e14a57d7b0cb1bd800cd9e22f44
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327193
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13688
Tested-by: build bot (Jenkins)
Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
The new option CONFIG_MRC_CACHE_FMAP will cause fastboot_cache.c to
look in the FMAP for a region named "RW_MRC_CACHE" and prevents adding
a CBFS file named "mrc.cache".
Tested on a fsp_baytail-based board.
Change-Id: I248f469c7e3447ac4ec7be32229fbb5584cfd2ed
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13632
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: York Yang <york.yang@intel.com>
Remove the "static" declaration from fsp_run_silicon_init and declare
the routine in ramstage.h. This routine can be called directly when FSP
is already in RAM.
TEST=Build and run on Galileo
Change-Id: Iddb32d00c5d4447eab5c95b0ad5c40309afa293e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13630
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The registers associated with the MTRRs for Quark are referenced through
a port on the host bridge. Support the standard configurations by
providing a weak routines which just do a rdmsr/wrmsr.
Testing:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select DISPLAY_MTRRS"
* Add "select HAVE_FSP_PDAT_FILE"
* Add "select HAVE_FSP_RAW_BIN"
* Add "select HAVE_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The MTRRs are displayed and
* The message "FspTempRamExit returned successfully" is displayed
TEST=Build and run on Galileo
Change-Id: If2fea66d4b054be4555f5f172ea5945620648325
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13529
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
On certain Winbond SuperIO devices, when a PS/2 mouse is not
present on the auxiliary channel both channels will cease to
function if the auxiliary channel is probed while the primary
channel is active. Therefore, knowledge of mouse presence
must be gathered by coreboot during early boot, and used to
enable or disable the auxiliary PS/2 port before control is
passed to the operating system.
Add auxiliary channel PS/2 device presence detect, and update
the Winbond W83667HG-A driver to flag the auxiliary channel as
disabled if no device was detected.
Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Now coreboot should do BIOS CAR setup along with NEM
mode setup.
This patch also provides a mechanism to use 16MB code caching
benefit although LLC still limited to 1M/1.5M based
on SOC LLC limit.
Here with unlimited cache line gets replaced. Now we could use
unlimited cache size along with well defined data size
[pg: updated to current upstream #defines]
BUG=chrome-os-partner:48412
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b
Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a
Original-Reviewed-on: https://chromium-review.googlesource.com/320855
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13138
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Remove include references to the soc include directory which are not
required to build the FSP driver. Remove "duplicate" include file
definitions from file that include fsp/romstage.h. Move the definition
of fill_power_state into soc/pm.h to ensure it is still available.
TEST=Build and run on Galileo
Change-Id: Ie519b3a8da8c36b47da512d3811796eab62ce208
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13436
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Properly use the CONFIG_CACHE_MRC_SETTINGS value to determine when to
cache the MRC settings.
TEST=Build and run on Galileo
Change-Id: Ibc76b20b9603b1e436a68b71d44ca1ca04db7168
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13437
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In order to support vboot requesting graphics support in normal
mode the VBT needs to be passed to FSP when it is requested
outside of the usual developer/recovery path.
To make this integrate cleaner use the generic bootmode provided
display_init_required() function instead. Also have it print a
message indicating when it does not pass VBT to GOP so it is
easier to see what happened in the console logs.
BUG=chrome-os-partner:49560
BRANCH=glados
TEST=Enable EC_SLOW_UPDATE on chell and test that when vboot
requests graphics support in normal mode FSP will get passed VBT
and bring up the panel.
Change-Id: I07bc54d37d687134b21baa60b5c278b5041241cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41efd322951b8f3a8a687944832bfd89fd3014ca
Original-Change-Id: I1b68760eabbf3af1d962cb2a3199e504a7852042
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322782
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13074
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
These files provide symbols needed by console and uart drivers. This
was not an issue in the past, as we were not setting up a C
environment this early in the boot process.
Change-Id: Ied5106ac30a68971c8330e8f8270ab060994a89d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This driver adds an SMBIOS table for Intel WiFi, but if SMBIOS
table generation is disabled then it should not attempt to
compile or it will fail to find the "get_smbios_data" member
of the device_operations structure.
Tested by compiling and booting on purism/librem13 with
SMBIOS table generation disabled.
Change-Id: Iac6c265da7daae1be4d7585dab7b54561ff4e631
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/13046
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The timestamps and post codes for the beginning of the FspNotify calls
are out of order. Reverse these entries to fix this error.
BRANCH=none
BUG=None
TEST=Build and run on kunimitsu
Change-Id: Ibfa1ba4b07e31bf3823469ac2dc7deaa8c67deab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3cd63c56c59337f0ff58fd11a78d08352cf6a04a
Original-Change-Id: I4627860d3ebf446523a5662dbbc8e59153441945
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/318903
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12987
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This just updates existing guard name comments on the header files
to match the actual #define name.
As a side effect, if there was no newline at the end of these files,
one was added.
Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's nothing in these files that needs to be hidden if
GOP support is disabled. Removing this allows skylake to
build when GOP support is turned off.
Change-Id: I2a4f47cd435f48668311719f388b502ae77eca99
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12859
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Since the GOP drivers aren't published in the 3rdparty blobs repo yet,
disable the GOP support for now so that abuild can build these
platforms.
Change-Id: Ic98671c163b433ebde89c8bf240ef4b2be393586
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12829
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This code looks like it was created from a disassembly of some
other driver. Attempt to fix it, without hardware or documentation.
CID 142909: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
Change-Id: I9b9cadf2acdba73913aad6bbe0d14ad64a652915
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12774
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
- Also update post code comment to keep under 80 characters.
Change-Id: Id0fd0ee5660f2628fe33188855bebb6e3eea8d2e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12780
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
When enabling the IOMMU on certain systems dmesg is spammed with I/O page faults like the following:
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.0 domain=0x000a address=0x000000fdf9103300 flags=0x0030]
Decoding the faulting address:
0x000000fdf9103300
fdf91x Hypertransport system management region
33 SysMgtCmd (System Management Command) = 0x33
3 Base Command Type = 0x3: STPCLK (Stop Clock request)
3 SMAF (System Management Action Field) = [3:1] = 0x1
1 Signal State Bit Map = [0] = 0x1
Therefore, the error appears to be triggered by an upstream C1E request.
This was eventually traced to concurrent access to the SP5100's SPI Flash controller by
multiple APs during startup. Calls to the nvram read functions get_option and read_option
call CBFS functions, which in turn make near-simultaneous requests to the SPI Flash
controller, thus placing the SP5100 in an invalid state. This limitation is not documented
in any public AMD errata, and was only discovered through considerable debugging effort.
Change-Id: I4e61b1ab767b1b7958ac7c1cf20eee41d2261bef
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12061
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The memory init code needs to match the saved mrc data. To
ensure that invariant holds supply the FSP version when
using the mrc cache API.
BUG=chrome-os-partner:46050
BRANCH=None
TEST=Built and booted on glados. Verified version mismatch checking
works.
Change-Id: I3f6dd19cb15a18761d34509749adafc89a72ed2d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12701
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The CONFIG_ prefix should be reserved for Kconfig symbols.
Change-Id: I1d3141e0f5f9e1161bc7f88158af8a5d5780829c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12564
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Now that only CBFS access is supported for finding resources
within the boot media the assets infrastructure can be removed.
Remove it.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In coreboot, bool, hex, and int type symbols are ALWAYS defined.
Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12560
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add post codes for the various FSP phases and use them as appropriate
in FSP 1.0 and 1.1 implementations.
This will make it more consistent to debug FSP hangs and resets.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados and chell
Change-Id: I32f8dde80a0c6c117fe0fa48cdfe2f9a83b9dbdf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3b616ff3c9d8b6d05c8bfe7f456f5c189e523547
Original-Change-Id: I081745dcc45b3e9e066ade2227e675801d6f669a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313822
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adding print for full fsp revision which includes:
0:7 - Build number
8:15 - Revision
16:23 - Minor version
24:31 - Major version
BRANCH=NONE
BUG=chrome-os-partner:46050
TEST=Built for kunimitsu and tested fsp revision is printed properly.
Change-Id: If2739e7cccd97e4b39da503a9d61222cde03bc95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c49be46f8d2085a620abac74126de5c3b634e649
Original-Change-Id: I2223cce22fb3d39faa37902d415d5fdbe321add6
Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310173
Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12594
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The right thing to do is to hide them behind PLATFORM_USES_FSP1_1.
The only things that should depend on HAVE_FSP_BIN is the code
that actually adds the file to CBFS, and the path to the file in Kconfig.
Removing the HAVE_FSP_BIN check requires some default values
for two Kconfig variables.
Change-Id: I9b6c3ed0cdfb0e02421d7b98c488a66e39add947
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12465
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
There were several symbols that were inside the 'if HAVE_FSP_BIN' that
don't really depend on having the FSP binary. In theory, we should be
able to build a coreboot rom and add the FSP binary later. This doesn't
always work in practice, but this is a step in that direction.
This also fixes a Kconfig warning for Rangeley.
Change-Id: I327d8fe5231d7de25f2a74b8a193deb47e4c5ee1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot's binary policy forbids to store include files required to build
the host binaries in the blobs directory. Hence remove the infrastructure
to do so.
Change-Id: I66d57f84cbc392bbfc1f951d13424742d2cff978
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12464
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
util.h uses ENV_* and hence needs to have rules.h
This is required for successful compilation of strago.
Change-Id: I0df35e90e2010aac43ef0a4d900f20c842d3bcb5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12495
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Set default values for the hex and int kconfig symbols so they don't
come up as undefined.
Change-Id: Ib51272f35baa32fe5f3dc369c7f554c77bc2add1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12499
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Set default values for the hex and int kconfig symbols so they don't
come up as undefined.
Change-Id: If104cbf7d84719a63fb80aa955efa8baa3953d09
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12498
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch implements Memory Margin Analysis feature in coreboot.
Few things to note
(1) the feature is enabled by setting CONFIG_MMA=y in the config file
(2) coreboot reads mma_test_metadata.bin from cbfs during romstage and
gets the name of MMA test name and test config name. Then coreboot finds
these files in CBFS.
If found, coreboot passes location and size of these files to FSP via
UPD params. Sets MrcFastBoot to 0 so that MRC happens and then MMA test
would be executed during memory init.
(3) FSP passes MMA results data in HOB and coreboot saves it in cbmem
(4) when system boots to OS after test is executed cbmem tool is used
to grab the MMA results data.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3) and executed MMA tests
Not tested on Glados
CQ-DEPEND=CL:299476,CL:299475,CL:299474,CL:299473,CL:299509,CL:299508,CL:299507,CL:*230478,CL:*230479
Change-Id: I0b4524abcf57db4d2440a06a79b5a0f4b60fa0ea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4aba9b728c263b9d5da5746ede3807927c9cc2a7
Original-Change-Id: Ie2728154b49eac8695f707127334b12e345398dc
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/299476
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: http://review.coreboot.org/12481
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Pass in dummy microcode when calling FSP TempRamInit API. FSP will not
do the microcode load and leave the work to coreboot.
Ensure that BSP has been loaded a microcode before calling TempRamInit
API, otherwise FSP will return error that No Valid Microcode Was Found.
Change has been verified on fsp_baytrail and will be applied to rangeley.
Change-Id: I8247c0503c8eb3d1c8eaa059632fb3a11c9daae9
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/11895
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The elog format stores the year of the event in bcd format.
Semi-recently rtc_get() started returning the full year,
e.g. 2015. However, bin2bcd takes a uint8_t as a parameter.
Converting a full year (2015 or 0x7df) to a uint8_t results
in passing bad values (223 or 0xdf) to bin2bcd. In other words
the input value of bin2bcd needs to be a number between 0 and 99.
Therefore fix that mistake.
BUG=chrome-os-partner:47388
BRANCH=None
TEST=Events show up with correct year in eventlog now.
Change-Id: I9209cb9175c0b4925337e2e5d4fea8316b30022a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 95a86013234dc999c988291f636e2db3803cc24a
Original-Change-Id: I12734bc3a423ba9d739658b8edc402b8d445f22e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311263
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12410
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I180fd548e8f45fc94e5086159c0e3e9465c74598
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12386
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
As vboot verification works on regions outside of CBFS
pass the entire ROM_SIZE to FSP for creating a cacheable
RO region.
Additionally remove the CACHE_ROM_SIZE_OVERRIDE as it doesn't
work with non-power of 2 CBFS_SIZE. In practice the entire
ROM should be attempted to be cached.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados w/ a 3MiB CBFS_SIZE.
Change-Id: I61404c626ab2bcfd039d6eb3c01d9c13a0928446
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 92568c630c48446b1ad9d4f22056f22e0679970c
Original-Change-Id: I032e4d615d2b68d3a2e597555eb1b5034a74bf0a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309770
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12260
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Per IRC and Gerrit discussion, the normal / fallback
selector code is a rather weak spot in coreboot, and
did not function correctly for certain use cases.
Rework the selector to more clearly indicate proper
operation, and also remove dead code. Also tentatively
abandon use of RTC bit 385; a follow-up patch will
remove said bit from all affected mainboards.
The correct operation of the fallback code selector
approximates that of a power line recloser, with
a user option to attempt normal boot that can be
cleared by firmware, but never set by firmware.
Additionally, if cleared by user, the fallback
path should always be used on the next reboot.
Change-Id: I753ae9f0710c524875a85354ac2547df0c305569
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12289
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
One of the interrupts in intel_vga_int15_handler lacks
positive return status. Write correct status to avoid
error messages in log.
TEST=With this change `int15 call returned error` is not shown anymore
on a custom board with Intel Atom CPU, i945GME northbridge and
i82801gx southbridge.
Change-Id: I740b2df9bd6a7d261d89bef74b924edbb64354aa
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/12255
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Always use the common FSP code. Remove the FSP_RAM_INIT, FSP_ROMSTAGE,
FSP_STACK and FSP_STAGE_CACHE Kconfig values.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ib3d015cb2dc257e46c2340cc7bc09cf0ffb0492c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5197b1354d138759dfaa428c665de6cbfb8e8911
Original-Change-Id: I3e3c1c9e6f73009a099c1ec3688dbd8c326fc766
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306142
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12158
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Rename soc_display_upd_value to fsp_display_upd_value since the routine
was moved from src/soc/intel/common into src/drivers/intel/fsp1_1.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ifadf9dcdf8c81f8de961e074226c349fb9634792
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 95238782702999a178989467694ac1f15c079615
Original-Change-Id: Ibd26ea41bd5c7a54ecd3c237f7fb7bad6dbf7d8a
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306351
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12157
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Move the FSP common code from the src/soc/intel/common directory into
the src/drivers/intel/fsp1_1 directory. Rename the Kconfig values
associated with this common code.
BRANCH=none
BUG=None
TEST=Build and run on kunimitsu
Change-Id: If1ca613b5010424c797e047c2258760ac3724a5a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8228cb2a12df1cc06646071fafe10e50bf01440
Original-Change-Id: I4ea84ea4e3e96ae0cfdbbaeb1316caee83359293
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306350
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12156
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
With SPI TPMs there is no SERIRQ for interrupts, instead it is
a PIRQ based interrupt. The TCG PC Client Platform TPM Profile
Specification says it must be active low and shared.
This can be enabled with the CONFIG_TPM_PIRQ option that will
specify the interrupt vector to report for the TPM.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=verify TPM interrupt functionality in /proc/interrupts on glados
Change-Id: Iad3ced213d1fc5380c559f50c086206dc9f22534
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: abdd0b8ecdf51ff32ed8bfee0823bbc30d5d3d49
Original-Change-Id: If7d22dfcfcab95dbd4c9edbd8674fc8d948a62d2
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304133
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12147
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch was tested with the following card:
IDE interface: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller [1095:0680] (rev 02)
Change-Id: I988b73684b54942d8ee6e44a9319dcc54086fca7
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/12171
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add full support for fan control, fan monitoring, and voltage
monitoring. Fan speeds and functions are configurable via
each mainboard's devicetree.cb file.
NOTE: This patch effectively rewrites large portions of
the original driver. You may need to re-verify correct
operation on your hardware if you were using the old
driver code.
Change-Id: I3e246af0e398d65ee43ea708060885c67fd7d202
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11936
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Those are actually board specific. Keep the old value as defaults,
though. The defaults are included by all affected boards.
Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11705
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR,
we also remove the _MSR suffix, as they are, by definition, MSRs.
Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11761
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to support verstage the cache-as-ram split
is taken advantage of such that verstage has the
cache-as-ram setup and rosmtage has the cache-as-ram
tear down path. The verstage proper just initializes
the console and attempts to run romstage which triggers
the vboot verification of the firmware. In order to
pass the current FSP to use during romstage a global
variable in cache-as-ram is populated before returning
to the assembly code which tears down cache-as-ram.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados with verstage support as well as
VBOOT_DYNAMIC_WORK_BUFFER with direct link in romstage.
Change-Id: I8de74a41387ac914b03c9da67fd80f8b91e9e7ca
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11824
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To support x86 verstage one needs a working buffer for
vboot. That buffer resides in the cache-as-ram region
which persists across verstage and romstage. The current
assumption is that verstage brings cache-as-ram up
and romstage tears cache-as-ram down. The timestamp,
cbmem console, and the vboot work buffer are persistent
through in both romstage and verstage. The vboot
work buffer as well as the cbmem console are permanently
destroyed once cache-as-ram is torn down. The timestamp
region is migrated. When verstage is enabled the assumption
is that _start is the romstage entry point. It's currently
expected that the chipset provides the entry point to
romstage when verstage is employed. Also, the car_var_*()
APIs use direct access when in verstage since its expected
verstage does not tear down cache-as-ram. Lastly, supporting
files were added to verstage-y such that an x86 verstage
will build and link.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using separate verstage.
Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Changes to CR1 and CR2 were effectively overwriting the backlight
configuration from the devicetree with static values.
Instead read the maximum brightness value from BCLM (backlight
modulation frequency) and calculate the target level (Arg0 is the
target level as percentage).
Turned out that _BQC has to return a value from the list returned by
_BCL. So XBQC got a little heavier to search for the correct value.
Change-Id: I35419993c8250c95fc69ba4db30db9dba9e6f8ff
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11704
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
The two cases only differ in the register locations.
As the values in BRIG were all the same, consolidate them. They also
got normalized to percentages as the ACPI spec wants that (0x61 was 100%
before).
Change-Id: I9216a953bb89458ed102c39194ea370cbf463d5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11703
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Consolidate some common (and mostly broken) code. Will try to fix things
in separate commits.
Maybe, igd.asl taken from gm45 (the non-PCH case) could also be used for
i945 and sch. But this needs further investigation.
Change-Id: Id3663bf588458e1e71920b96a3149f96947921e9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11702
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
In order to introduce a verstage which performs vboot
verification the cache-as-ram environment needs to be
generalized and split into pieces that can be utilized
in romstage and/or verstage. Therefore, the romstage
pieces were removed from the cache-as-ram specific pieces
that are generic:
- Add fsp/car.h to house the declarations for functions in
the cache-as-ram environment
- Only have cache_as_ram_params which are isolated form the
cache-as-ram environment aside from FSP_INFO_HEADER.
- Hardware requirements for console initialization is done
in the cache-as-ram specific files.
- Provide after_raminit.S which can be included from a
romstage separated from cache-as-ram as well as one that
is tightly coupled to the cache-as-ram environment.
- Update the fallout from the API changes in
soc/intel/{braswell,common,skylake}.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302481
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11816
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of just passing bits, tsc_low, tsc_high, and an
opaque pointer to chipset context those fields are bundled
into a cache_as_ram_params struct. Additionally, a new
struct fsp_car_context is created to hold the FSP
information. These could be combined as the existing
romstage code assumes what the chipset_context values are, but
I'm leaving the concept of "common" alone for the time being.
While working in that area the ABI between assembly and C code
has changed to just pass a single pointer to cache_as_ram_params
struct. Lastly, validate the bootloader cache-as-ram region
with the Kconfig options.
BUG=chrome-os-partner:44676
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Ib2a0e38477ef7c15cff1836836cfb55e5dc8a58e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/300190
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Change-Id: Ic5a0daa4e2fe5eda0c4d2a45d86baf14ff7b2c6c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11809
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Only one value would work with corresponding gma code currently (which one
depends on board). Going forward, it's possible to compute which number can
be used, so there is no need to keep this info around.
Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11862
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Based on the info by Felix Held.
Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11857
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Commit 47818b4d60
(fsp/cache_as_ram.inc and boards: Fix incorrect usage of POST_IO)
breaks the logic which decides whether FSP
could be found or not in cache_as_ram.inc.
Fix the error by inverting the logic of the test.
TEST=Bootet mc_tcu3 board
Change-Id: I993d3422ac406d204a53e4dc890210fb9a52469d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11806
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
POST_IO is a user-visible config bool. fsp_1_0/cache_as_ram.inc made a
mess of it, by forcing a build-time error when CONFIG_POST_IO was not
being set. fsp 1.0 boards ended 'select'ing this in their Kconfig.
Refactor fsp/cache_as_ram.inc handling of POST codes, and remove the
"select POST_IO" from boards that have it. Instead of implementing an
ad-hoc changing post code display and a delay based on port 0xed, just
encode the FSP failure code in the POST code. Since FSP failure codes
are > 16, we can encode the failure code in the lower nibble, and theirfailing function in the upper nibble.
Change-Id: Iaa3e6533e8406b16ec0689abd704984d79293952
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8485
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Users of DRIVERS_UART_8250MEM_32 would have to also select
DRIVERS_UART_8250MEM to avoid missing Kconfig dependencies. Instead,
do what the OXPCIE driver dies and select the appropriate options.
Change-Id: I40d93df024fcb3a9ad6dc51d6a5966e7b1b6c07f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11786
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
In order to support FSP 1.1 relocation within cbfstool
the relocation code needs to be moved into commonlib.
To that end, move it. The FSP 1.1 relocation code binds
to edk2 UEFI 2.4 types unconditionally which is separate
from the FSP's version binding.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Ib2627d02af99092875ff885f7cb048f70ea73856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11772
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that the commonlib/endian.h routines have landed utilize
those in the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If431d64fd2843bea864d971ca1ea06b07c0d6435
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11771
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using a copiler to compile something that's already a binary is pretty
stupid. Now that Stefan converted most microcode in blobs to a plain
binary, use the binary version.
Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11607
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Avoid specifying the size of the microcode in microcode_size.h.
Instead, the size will be determined during build time and
microcode_size.h will be generated. This way, the size does
not need to be adjusted by hand.
Change-Id: I868f02b0cc03af12464a6a87c59761c200eb2502
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11709
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Since the TPM _CRS method creates named objects it needs
to be serialized to prevent a warning in recent iasl.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I59a52552ab24b7d9c9928331aa8c8d19f54fd1b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a5c474c94980661573a99eb94d5f661f2d0114b
Original-Change-Id: Ie9d164ea8781304dd0bf1833d182d7c601b8e18d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302162
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11715
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In order for easier consumption in userland tools split the
FSP 1.1 relocation logic into a single file w/ an aptly named
function name.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I49998b8621611c638375bc90884e80d0cd3bdf78
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc898e1c528df60683575d553d6194a1e8200afa
Original-Change-Id: I736c0059d43f6d0be4fdb6e6f47cdb5c189a7ae8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298833
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11665
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
UEFI defines everything as little endian. Additionally the
EDK II header files assume they are used on machines
which are running UEFI -- thus little endian. This patch
attempts to fix up all the possible endian violations
when running on a big endian machine. This is for
in preparation of using the FSP 1.1 code in userland
for relocating FSP images.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I39f4de84688e48978a4650303b8af8345f44fd03
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c7eab9b7c10765355feffa3c3cac403275f9479
Original-Change-Id: I33a7661281307cf31ae33899d1a4eb6a2fbd01a1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298832
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11664
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to integrate fsp 1.1 relocation with cbfstool one
needs to be able to supply the address to relocate the FSP
image. Therefore, allow this by returning offset for return
values. Note that exposed API has not changed.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Confirmed relocation values matched.
Change-Id: I650a08ffb9caf7e0438a988cae9bec56dd31753c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 53870b0df809418e9a09e7d380ad2399a09fb4fb
Original-Change-Id: Ic2ec63681ed4e652e2624b40e132f95d1e5a0887
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298831
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11663
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP has some unique attributes which makes integration
cumbersome:
1. FSP header files do not include the types they need. Like
EDKII development it's expected types are provided by the
build system. Therefore, one needs to include the proper
files to avoid compilation issues.
2. An implementation of FSP for a chipset may use different
versions of the UEFI PI spec implementation. EDKII is a
proxy for all of UEFI specifications. In order to provide
flexibility one needs to binding a set of types and
structures from an UEFI PI implementation.
3. Each chipset FSP 1.1 implementation has a FspUpdVpd.h
file which defines it's own types. Commonality between
FSP chipset implementations are only named typedef
structs. The fields within are not consistent. And
because of FSP's insistence on typedefs it makes it
near impossible to forward declare structs.
The above 3 means one needs to include the correct UEFI
type bindings when working with FSP. The current
implementation had the SoC picking include paths in the
edk2 directory and using a bare <uefi_types.h> include.
Also, with the prior fsp_util.h implementation the SoC's
FSP FspUpdVpd.h header file was required since for providing
all the types at once (Generic FSP 1.1 and SoC types).
The binding has been changed in the following manner:
1. CONFIG_UEFI_2_4_BINDING option added which FSP 1.1
selects. No other bindings are currently available,
but this provides the policy.
2. Based on CONFIG_UEFI_2_4_BINDING the proper include
paths are added to the CPPFLAGS_common.
3. SoC Makefile.inc does not bind UEFI types nor does
it adjust CPPFLAGS_common in any way.
4. Provide a include/fsp directory under fsp1_1 and
expose src/drivers/intel/fsp1_1/include in the
include path. This split can allow a version 2,
for example, FSP to provide its own include files.
Yes, that means there needs to be consistency in
APIs, however that's not this patch.
5. Provide a way for code to differentiate the FSP spec
types (fsp/api.h) from the chipset FSP types
(fsp/soc_binding.h). This allows for code re-use that
doesn't need the chipset types to be defined such as
the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Change-Id: I894165942cfe36936e186af5221efa810be8bb29
Reviewed-on: http://review.coreboot.org/11606
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
Add a parameter to find_fsp which is the image base address. Adjust the
fake stack in cache_as_ram.inc to pass in the read-only FSP image base
address. In fsp_notify, pass in the read-only FSP image base address
when the FSP header pointer is NULL. In find_fsp, validate the FSP
binary image starting from the specified image base address.
BRANCH=none
BUG=None
TEST=Build and run on Skylake
Change-Id: Iac43c8aac8491390479af551765b514ca919928a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 592dae53f3b32694190cc5cb0fa6ca94df68aa95
Original-Change-Id: I7d6a415458a81f3b6bcdcfc9a90eceb2ac22144e
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295593
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11545
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The most common payloads do not need this set, so optimize for the
common case.
Change-Id: I2e5b68d74e9b91b41bbbcffc17d31d5c1bb38fd4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8599
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Having no supplied printk level makes this info message
printed at all levels and so it shows up when booting with
DEFAULT_CONSOLE_LOGLEVEL=3.
BUG=chrome-os-partner:40635
BRANCH=none
TEST="USE=quiet-cb emerge-glados coreboot"
Change-Id: I6c52aafbe47fdf297e2caeb05b4d79a40a9a4b9d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e6cffc6d5a9fcda60a04f8a31f2b2ffe4b620c77
Original-Change-Id: Ie6715d15f950d184805149619bebe328d528e55a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297336
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11559
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The platform ID is an 8 character ASCII string, so our config should
take it in as a string, rather than a set of two 32-bit integers.
Change-Id: I76da85fab59fe4891fbc3b5edf430f2791b70ffb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
The reason for hardcoding the position of the MRC cache was to satisfy
the alignment to the erase size of the flash chip. Hardcoding is no
longer needed, as we can specify alignment directly. In the long term,
the MRC cache will have to move to FMAP, but for now, we reduce
fragmentation in CBFS.
Note that soc/intel/common hardcoding of mrc.cache is not removed, as
the mrc cache implementation there does not use CBFS to find the cache
region, and needs a hardcoded address.
Change-Id: I5b9fc1ba58bb484c7b5f687368172d9ebe625bfd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11527
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
coreboot has no CREDITS file.
Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11514
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Commit "7dbf9c6 edid: Use edid_mode struct to reduce redundancy" moved
some fields from "struct edid" to "struct edid_mode". Adapt the bochs
and cirrus drivers to that change.
Change-Id: I9ec82a403d0264955d4b72496219036c7775c758
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/11502
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The BOOT_STATE_INIT_ENTRY macro can only be used in ramstage, however
the current state of the header meant bad build errors in non-ramstage.
Therefore, people had to #ifdef in the source. Remove that requirement.
Change-Id: I8755fc68bbaca6b72fbe8b4db4bcc1ccb35622bd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11492
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When building up which files to include in romstage there
were both 'cpu_incs' and 'cpu_incs-y' which were used to
generate crt0.S. Remove the former to settle on cpu_incs-y
as the way to be included.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. No include file changes.
Change-Id: I8dc0631f8253c21c670f2f02928225ed5b869ce6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11494
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The #error messages only say that "CONFIG_* must be defined", which
conveys no more information that the compiler or assembler failing
when it encounters an undefined CONFIG_* symbol.
Change-Id: I6058474d4cd454cfc20290650425d379f388abd9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We don't need the code in romstage, and it saves us a few #ifdefs.
Change-Id: I26d867566f07c7d80890cd01bf055be7497130d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For some reason fsp 1.1 has a duplicate mechanism for saving
mrc data as soc/intel/common. Defer to the common code as all
the existing users were already using the common code.
BUG=chrome-os-partner:44620
BRANCH=None
TEST=Built and booted glados. Suspended and resumed.
Change-Id: I951d47deb85445a5f010d23dfd11abb0b6f65e5e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Original-Commit-Id: 2138b6ff1517c440d24f72a5f399bd6cb6097274
Original-Change-Id: I06609c1435b06b1365b1762f83cfcba532eb8c7a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295236
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11454
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This replaces various timing mode parameters parameters with
an edid_mode struct within the edid struct.
BUG=none
BRANCH=firmware-veyron
TEST=built and booted on Mickey, saw display come up, also
compiled for link,falco,peppy,rambi,nyan_big,rush,smaug
[pg: extended to also cover peach_pit, daisy and lenovo/t530]
Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9
Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289964
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Using struct prog and struct region_device allows for the
caller to be none-the-wiser about where FSP gets placed. It
also allows for the source location to be abstracted away
such that it doesn't require a large mapping up front to
do the relocation. Lastly, it allows for simplifying the
intel/commmon FSP support in that it can pass around a
struct prog.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I034b04ab2b7e9e01f5ee14fcc190f04b90517d30
Original-Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290830
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ibe1f206a9541902103551afaf212418fcc90e73c
Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Reviewed-on: http://review.coreboot.org/11193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There was no implementation for uart_fill_lb() in the 8250mem
driver. Rectify this so when 8250MEM and CONSOLE_SERIAL are
employed then the build doesn't fail.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Built with glados using 8250MEM
Original-Change-Id: I35d6b15e47989c1854ddcee9c6d46711edffaf3e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289899
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: I972b069a4def666f509268816de91ed6c0f655d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11169
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Run `indent -linux src/drivers/pc80/i8254.c` and manually put the `;` in
the while loop back on a separate line.
Change-Id: I58c4c5df3846a91ef92aafb608962dc26a21f811
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10452
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For hex and int type kconfig symbols, IS_ENABLED() doesn't work. Instead
check to make sure they're defined and not zero. In some cases, zero
might be a valid value, but it didn't look like zero was valid in these
cases.
Change-Id: Ib51fb31b3babffbf25ed3ae4ed11a2dc9a4be709
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10886
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update Makefile.inc to use the simplified CBFS image type.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Ibb8413ab90b147e9d26d32639a8822c57ca54a46
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The many different places to put vboot support in can be confusing.
Instead of using libverstage (which isn't enough since those functions are
sometimes called outside that, too), mention all stages where it can resides
explicitly.
Change-Id: Idddb9f5e2ef7bcc273f429d9f432bd37b4573567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10728
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
That way it's available wherever the verstage code ends up, bootblock,
verstage or romstage.
Change-Id: I0665e297f199acd60cff93e1b39812f183115d33
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10707
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Because of a misunderstanding of how Kconfig files are parsed, the
OVERRIDE_MRC_CACHE_LOC symbol was added to make sure that the value
was correctly set. This is not needed unless for some reason the
Kconfig parser is suddenly rewritten to parse everything differently.
At some point, the value in the FSP's Kconfig file was updated to
OVERRIDE_CACHE_CACHE_LOC, while the entries in the mainboard
Kconfig files were not updated. This resulted in the default values
not getting set correctly by default on the FSP Bay Trail boards.
This removes the whole bunch of incorrect and unnecessary symbols and
just sets the default for the MRC cache location directly.
Change-Id: I1cec758576866b7e0677272b8309bfde8d4a1ee4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10611
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Move the 'Intel FSP' Kconfig comment inside the 'if' block so that it
doesn't show up on platforms that aren't using it.
- Update the comment to reflect that this is version 1.1 of the FSP
interface.
Change-Id: I7182c5b07332c4f95620f7374526ab1de0484d01
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10650
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Use 3rdparty/blobs subdirectory for binary files
Display the MTRRs after TempRamExit and before the MTRR setup
Clear all of the variable MTRRs before the MTRR setup
Define the FSP attributes location and bits
Properly display the FSP_RESERVED_MEMORY_RESOURCE_HOB and the
FSP_BOOTLOADER_TOLUM_HOB.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: I788a5f1e7676b1a06c1bcd66ddbd0a2249cad47c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's derived from EEPROM on Lenovo machines and not from user config
which is ignored.
Change-Id: I54fb76a3160e47cd36d33d2937c4bfaddcd36a69
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7055
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
It can be helpful to certain users of the cbmem init hooks
to know if recovery was done or not. Therefore, add this
as a parameter to the hooks.
Change-Id: I049fc191059cfdb8095986d3dc4eee9e25cf5452
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Squashed and adjusted two changes from chromium.git. Covers
CBMEM init for ROMTAGE and RAMSTAGE.
cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API
There are several use cases for performing a certain task when CBMEM is
first set up (usually to migrate some data into it that was previously
kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them
differently: timestamp migration is called explicitly from
cbmem_initialize(), certain x86-chipset-specific tasks use the
CAR_MIGRATION() macro to register a hook, and the CBMEM console is
migrated through a direct call from romstage (on non-x86 and SandyBridge
boards).
This patch decouples the CAR_MIGRATION() hook mechanism from
cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer
description of what it really does. All of the above use cases are
ported to this new, consistent model, allowing us to have one less line
of boilerplate in non-CAR romstages.
BRANCH=None
BUG=None
TEST=Built and booted on Nyan_Blaze and Falco with and without
CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after
boot (and the resume log after S3 resume on Falco). Compiled for Parrot,
Stout and Lumpy.
Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbmem: Extend hooks to ramstage, fix timestamp synching
Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common
CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since
timestamp_sync() was no longer called there. Oops.
This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism
to the cbmem_initialize() call in ramstage. The macro is split into
explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as
possible and prevent surprises (although just using a single macro and
relying on the Makefiles to link an object into all appropriate stages
would also work).
This allows us to get rid of the explicit cbmemc_reinit() in ramstage
(which I somehow accounted for in the last patch without realizing that
timestamps work exactly the same way...), and replace the older and less
flexible cbmem_arch_init() mechanism.
Also added a size assertion for the pre-RAM CBMEM console to memlayout
that could prevent a very unlikely buffer overflow I just noticed.
BRANCH=None
BUG=None
TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once
again show up. Compile-tested for Rambi and Samus.
Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7878
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use of scan_static_bus() and tree traversals is somewhat convoluted.
Start cleaning this up by assigning each path type with separate
static scan_bus() function.
For ME, SMBus and LPC paths a bus cannot expose bridges, as those would
add to the number of encountered PCI buses.
Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: Idcd059f05523916f726b94931c2487ab028b7d72
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10409
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This should be an internal selectable variable rather than user-visible config.
Moreover the description is misleading.
This is a typical case of an option "Should it work?" where there is only one
right answer yet we still ask it.
Change-Id: Idc0ce2e1b9f89eddd034966cc877483d994ce0eb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10378
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch provides support for TPM Infineon SLB9670 by adding its
device ID to the list.
BRANCH=None
BUG=chrome-os-partner:40640
TEST=Built and test SLB9670 on SKL U Reference board Fab 2
Change-Id: I2d26fc6c7d074881f2e6189e1325808544b7d26d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c92884be75b631c302801e162292c245ed7bf5d
Original-Change-Id: I4607fc96f70175b2461b40ba61e7a821e187de40
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/274053
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch provides support for TPM Infineon TT1.2
devices by enumerating the TT1.2 ID in the Infineon
device list.
BRANCH=None
BUG=None
TEST=Built for sklrvp and tested on RVP3.
Change-Id: I9daecc09311477fd9947e829d80abc040b2c9e3d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3ff86f96cb3e2f203dbc86e7004f1a037b98b90a
Original-Change-Id: I8b59eba348fc44632e22600646eb0b10eb2f4901
Original-Signed-off-by: Subrata <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271256
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/10302
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Current TPM driver does not support multiple devices for
a given vendor. As the device object never takes the 2nd
ID in the list. This patch fixes the same.
BRANCH=None
BUG=None
TEST=Built for sklrvp and tested on RVP3.
Change-Id: I82c3267c6c74b22650fc53dc6abdc2eb3daa138e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ff42613f11b4f1a79e907601f1ecb7b83a3aeaab
Original-Change-Id: Ieb44735c37208bfe90a8e22e0348dd41c8c642d2
Original-Signed-off-by: Subrata <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271727
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Commit-Queue: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Reviewed-on: http://review.coreboot.org/10303
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Old igd.asl had inconsistent addresses (between _DOD and actual device)
and ghost devices. Any of those is enough to make brightness on windows
fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous
copying of the same thing 6 times per chipset. Leave only hooking up and
chipset-specific part in chipset directory. Move NVS handling and ACPI-spec
parts to a common file.
Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7472
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10322
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Just not exporting TPM isn't good enough as it can still be accessed.
You need to send it a deactivate command.
Change-Id: I3eb84660949c2d1e2b492d541e01d4ba78037630
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10270
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This code is not specific to ChromeOS and is useful outside of it.
Like with small modifications it can be used to disable TPM altogether.
Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10269
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Aaron Durbin