This patch cleans up remaining uses of raw boolean Kconfig values I
could find by wrapping them with CONFIG(). The remaining naked config
value warnings in the code should all be false positives now (although
the process was semi-manual and involved some eyeballing so I may have
missed a few).
Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The prev_sleep_state value was showing 5 even after warm reboot, once the
SUS_PWR_FLR bit is being set. This bit was not being cleared.
Hence clearing the PMCON status bits.
BUG=b:128482282
BRANCH=None
TEST=In cbmem logs, check for value of “prev_sleep_state” using command
cbmem –c | grep “prev_sleep_state”
For cold reboot, "prev_sleep_state 5"
For warm reboot, "prev_sleep_state 0"
Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
There are 3 PCI-E 1x ports on p5q_pro and p5qc, which correspond to
the first three functions of 1c.
Confirmed on a p5q_pro board.
Change-Id: I779400494e27bf046996512d1f772311e6e4e091
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
gale has a button which is essentially used as a
"physical presence" button. Its only use is to emulate
^D or ^U on boot when the button is pressed.
(See depthcharge src/board/gale/board.c)
Previously (and currently in CrOS firmware branch) this
GPIO was defined as the physical developer switch,
and read as such in depthcharge. It was removed in
cleanup patch CB:18980.
Add the GPIO back as physical presence ("presence"),
which will be read by depthcharge in CL:1532492.
BUG=b:124141368, b:124192753, chromium:942901
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ic144f839b7f9933d573db8f84c4bf5905eea96f6
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The TPM driver isn't loaded in other stages but verstage so when we try
to communicate with the TPM it fails. We don't need to communicate with
it anyway since the TPM won't continue to tell us that recovery was
requested, only the first query responds with the recovery request.
BRANCH=none
BUG=b:129150074,b:123360379
TEST=1)boot arcada without recovery and notice that the "tpm transaction
failed" log lines are no longer present. 2) boot into recovery using the
ESC refresh power key combination and verify that the recovery reason
was "recovery button pressed"
Change-Id: I13284483d069ed50b0d16b36d0120d006485f7f4
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Short <keithshort@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Avoid preprocessor here, also we never set loglevel
to value of >8 so the call would not be made.
The calls to ram_check() were removed, for a long
time that function has not tested start..stop region.
Change-Id: Ib952b8905c29a5c5c289027071eb6ff59aaa330b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch ensures to make use of common MP Init Kconfig to
choose desire method to peform MP initialization for platform.
Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
mainboard users can select correct MP Init Kconfig in order to
perform MP initialization.
1. Native coreboot MP Init.
2. FSP to do MP Init.
3. FSP to make use of coreboot MP service PPI to perform MP Initialization
Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for bootblock and postcar, which were introduced on qemu
in the last few month.
Fixes non-working debugcon in those stages.
Change-Id: I553f12c2105237d81ae3f492ec85b17434d8334c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31833
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is the second of 2 patches upgrading the SMBIOS interface to the latest 3.2
First patch is in mosys. Newer required fields are added to various types definitions
BUG=NONE
TEST=Boot to OS on GLK Sparky
Change-Id: Iab98e063874c9738e48a387cd91341d266391156
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
We have more test data now so update the DPTF accordingly.
* Change passive temp to 50/57/55/52 C
* Change critical temp to 75C
* All interval to 20 secs
BUG=b:113101335
TEST=temp/perf looks better in thermal chamber test.
Change-Id: I872c3f1875d0cbac148c44c449954e6871c9d0b0
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change enables user to shutdown the system by shortly pressing
power button (<10sec) before OS is loaded. Main use case is shutdown
from recovery/broken screen.
BUG=N/A
TEST=Boot up into recovery screen on Sarien platform, press power button
once, and system should shutdown immediatelly.
Change-Id: I7655daf65ff058df7d9bad4567f74b4f4007acb4
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
AP communicates with FP MCU through gspi1.
BUG=b:126455006
BRANCH=None
TEST=ensure during bootup we see spi id spi-PRP0001:01 in dmesg
FP MCU fw is not ready yet, so not much testing to be done yet.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I2eba205d5e63664dca684fbd849454c5a2fe0d0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32017
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bloog supports keyboard backlight feature, so enable the ASL code.
BUG=b:127736039
BRANCH=octopus
TEST=Build and boot bloog, verify that the string 'KBLT' is in the DSDT.
Change-Id: Iba66aade090816ea2376cae4baf4aae019cc97f4
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
These signatures need to be consistent across different
architectures.
Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add SAR0, which is an SX9310. The schematics and layout have a second
SAR1 sensor provisioned on I2C4, with an interrupt of GPP_A6, but this
is not populated.
Signed-off-by: Evan Green <evgreen@chromium.org>
BUG=b:128540461
BRANCH=none
TEST=Boot kernel with sx9310 driver, see it come up happily
Change-Id: I63943cc7da5ff56f6ef6dcbd99bb8f8f031e8bf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Enrico Granata <egranata@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enable the HUNG_TASK as a wakeup host event, as it's used by S0ix failure
detection to wake the system back up if a suspend to S0ix never
asserted S0_SLP#.
BUG=b:123716513
BRANCH=None
TEST=Test S0ix on Hatch with appropriate EC and kernel changes.
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I447211892df210af97e8df0380bab032b14cbee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32004
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Depthcharge is changing how the RW_LEGACY CBFS is handled for alternate
bootloaders, see https://crrev.com/c/1528550 and
https://crrev.com/c/1530303. This means that RW_LEGACY must be marked as
CBFS in the fmap in order to work. All boards except for kahlee(grunt)
have CBFS marked.
BUG=b:128703316
TEST=Build and ran on grunt along with chromium patches on grunt and was
able to list alternate bootloader with ctrl+l
BRANCH=none
Change-Id: I843d565a9503d27e666a34e59aba263ec490c81f
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32019
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously, the size of memory made for vboot_working_data
through the macro VBOOT2_WORK was always specified in each
individual memlayout file. However, there is effectively no
reason to provide this customizability -- the workbuf size
required for verifying firmware has never been more than 12K.
(This could potentially increase in the future if key sizes
or algorithms are changed, but this could be applied globally
rather than for each individual platform.)
This CL binds the VBOOT2_WORK macro to directly use the
VB2_WORKBUF_RECOMMENDED_DATA_SIZE constant as defined by vboot
API. Since the constant needs to be used in a linker script, we
may not include the full vboot API, and must instead directly
include the vb2_constants.h header.
BUG=b:124141368, b:124192753
TEST=Build locally for eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
CQ-DEPEND=CL:1504490
Change-Id: Id71a8ab2401efcc0194d48c8af9017fc90513cb8
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all
DDI ports are enabled and hence configures the HPD and CLK for DDI ports.
This patch initializes only the required UPDs to enable display ports.
BUG=b:123907904
TEST=DP devices working correctly.
Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch removes all local definitions of sub_system functions and make
use of common generic pci_dev_set_subsystem() from PCI bridge and Cardbus
devices as well.
Change-Id: I5fbed39ed448baf11f0e0786ce0ee94741d57237
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds generic log to perform subsystem programming
based on header type.
Type 0: subsystem offset 0x2C
Type 2: subsystem offset 0x40
Type 1: Read CAP ID 0xD to know cap offset start, offset 4 to locate
subsystem vendor id.
Change-Id: Id8aed6dac24517e93cd55d6bb3b254b7b4d950d3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch removes local definitions of sub_system function and make use
of common function pci_dev_set_subsystem().
Change-Id: I91982597fdf586ab514bec3d8e4d09f2565fe56d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch will fix these checkpatch errors in src/arch/mips/.
- src/arch/mips/ashldi3.c:22: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
- src/arch/mips/bootblock_simple.c:35: WARNING: braces {} are not necessary for any
arm of this statement
Change-Id: Ic859913b93dc8ed6ff64b551c8a6baf72d28c75a
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Use the compiler's `-include` switch to include `stdint.h` instead
of adding coreboot's include paths. This avoids leaking other coreboot
header files into lp0.
Change-Id: I321c0a2fc4a2b3941990804db4e1a691e1bed8c6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The work may be incomplete, we only have an emulation
power8 at the moment in the tree.
Change-Id: Icdaa0995c8610dcc636923cc79b8455dfaeaa057
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Motivation is to reduce use of !__PRE_RAM__, it does not
mean ENV_RAMSTAGE but we also exclude ENV_SMM with the change.
Change-Id: I1f96bb8c055a3da63274e1ab7f7d4bc70867cbf1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This reverts commit 51169b7dda4a1978d622e329a1c40e384471c165.
I was not ready to enable this option yet, until it is enabled
in depthcharge it needs to stay off in coreboot or depthcharge
will attempt to do software sync without a proper driver.
Change-Id: I4840812d0541f822502cfc5c66bed27edf4d2ecc
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32007
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support both boards with the same firmware add a SKU for
each variant that is used to include the proper EC firmware
image to match what the EC is expecting.
BUG=b:119490232
TEST=tested by faking the EC response to ensure that the OS
and firmware update tools are able to determine the correct
model based on the value returned by the EC.
Change-Id: Iaa677975e0bccbee5ec8a39821fe1637f08270fa
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This will be used to distinguish the mainboard SKU so that the
correct EC firmware can be bundled with the board.
This is read from EC RAM so it can be used by an ACPI method in
the future.
BUG=b:119490232
Change-Id: I71b8017fc4b88e793dfe709e1cb1ab0f0bcdc4fa
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Commit 74aa99a (src: Drop unused '#include <halt.h>')
accidentally added '#include <halt.h>', however tegra_lp0 directory
is not linked into the rest of coreboot. So we can't use generic halt()
from halt.c file.
Change-Id: I3a67abb77846172597b8ebde779878b9aa2ff8d7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31979
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop 'include <string.h>' when it is not used and
add it when it is missing.
Also extra lines removed, or added just before local includes.
Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch adds support to copy the wifi calibration
data to CBMEM so that the depthcharge can use it to
populate the data into wifi dt node.
Change-Id: Ia8184e48a7176bb3b52e4d43866b7d065952c13e
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Commit 41483c9 (soc/intel/cannonlake: Add required FSP UPD changes for
CML) changed the enum values for PCH_SERIAL_IO_MODE so that 0 is
invalid and valid values start from 1. However, get_param_value was
not updated to correctly subtract 1 before returning any value. This
change adds a macro PCH_SERIAL_IO_INDEX to apply the subtract 1
operation on any value that get_param_value needs to return.
BUG=b:128946016
TEST=Verified that hatch boots successfully.
Change-Id: I4e32fcd1efe4a535251f0ec58662a2dc5f70e8b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Check if `pcie_dev` is NULL instead of `dev`. This was flagged
as REVERSE_INULL during a Coverity scan, but is a simple typo.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Idc40574b9341d1b10cb2136cbc1a865efa3ab3ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31866
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create a new cbtable entry called VBOOT_WORKBUF for
storing a pointer to the vboot workbuf within the
vboot_working_data structure.
BUG=b:124141368, b:124192753
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
BRANCH=none
Change-Id: Id68f43c282939d9e1b419e927a14fe8baa290d91
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31887
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for FSP2.1 Kconfig which is backward compatible
with FSP2.0 specification and added below coreboot impacted features as below:
1. Remove FSP stack switch and use the same stack with boot firmware
2. FSP should support external PPI interface pulled in via
FSP_PEIM_TO_PEIM_INTERFACE
Change-Id: I2fef95a783a08d85a7dc2987f804a931613f5524
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30310
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures to have below listed features:
1. All required APIs to create MP service structure.
2. Function to get MP service PPI status
MP specification here:
http://github.com/tianocore/edk2/blob/master/MdePkg/Include/Ppi/MpServices.h
coreboot design document here:
../Documentation/soc/intel/icelake/MultiProcessorInit.md
Supported platform will call fill mp_services structure so that FSP can
install the required PPI based on coreboot published structure.
BRANCH=none
BUG=b:74436746
TEST=Able to publish MP service PPI in coreboot.
Change-Id: Ie844e3f15f759ea09a8f3fd24825ee740151c956
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25634
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
RK3399 SoC code still manually excludes the BL31 region from the memory
map, even though that is now automatically done with the BL31()
memlayout region. CB:31123 and CB:31538 just forgot to remove this line.
The resulting memory map stays the same.
Change-Id: I87458fa09f437b038af10e0fd9d76ef6d9394bc5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ting Shen <phoenixshen@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Default reserved value of used for SCI IRQ.
Configure SCIS field to use IRQ 9.
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I09aca433528b6f64ad3ff3753ae8392c0d89cdc0
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
This board is compatible with Intel Skylake and Kaby Lake generation
processors. This patch contains the minimum configuration for booting
and stable operation of the Ubuntu OS (18.04.1, Linux kernel 4.15).
It is based on Intel RVP8 mainboard.
Intel Kaby Lake FSP 3.6.0 is used to initialize CPU and PCH.
Graphics init with libgfxinit.
Works:
- Integrated graphics (only DVI port, tested with 1920x1080);
- PEG x16 (FSP must be configured with BCT to enable PEG);
- all PCIe x1 slots;
- all USB and SATA ports;
- SuperIO COM port for console;
- onboard audio.
TODO:
- other SuperIO functions;
- onboard network chip;
- suspend and resume;
- documentation.
Tested on Intel Core i5-6600 processor with Seabios (rel-1.12.0-10-
g171fc89) and Tianocore/edk2 (vUDK2018-8-ge6eccfc) as a payload.
Change-Id: I69396edc50948cf1d0da649241ce92171d32daf7
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Adding a new board variant 'Mistral' based on qcs405 soc.
TEST=build
Change-Id: I7ecfad68bb50f42acf36f51bc3433add56597c3d
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Adding the basic infrastruture soc support for qcs405 and
a new build variant.
TEST=build
Change-Id: Ia379cf375e4459ed55cc36cb8a0a92cab18b705e
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mmio resouces IOAPIC and ROM area not reserved.
Reserve IOAPIC and ROM resources.
BUG=N/A
TEST=Intel CherryHill CRB booting Embedded Linux
Change-Id: I917c30892b46ac1d964e7bab339082d17a1e706d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
coreboot have an option to use legacy UART or LPSS UART. FSP will use the
UART initialized by coreboot and we can choose an option to skip Uart
initialization by FSP.
For this, we need to pass correct debug interface flag to FSP through
which FSP will know which UART port to use. If we don't pass correct
interface information, FSP may try to dump logs on that port and it may
slow down the system.
BUG=none
BRANCH=none
TEST=Compile and boot with coreboot. Check FSP and coreboot logs are
coming on serial port.
Change-Id: I1ebb20c93e2c15ec085538509099de72bc9dd62c
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add the include for size_t.
Fixes compilation error on source files that do not include it.
Change-Id: Ic752886d94db18de89b8b8a5e70cf03965aeb5c3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
V1CAP is a write-once register, and it is already programmed in
intel/i945/early_init.c.
Tested on 945G-M4 board (i945G + 82801GB).
Change-Id: I4469cb7505d584f10c98aec579a2d78bf1950bf3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
SLOTCAP is R/WO, it becomes RO after the first write.
Write already done on line #583.
Tested using kprint before and after on 945G-M4 board.
Change-Id: I27579bc634e357490defabb041457aaa010fb1c8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable software sync by default if VBOOT is enabled.
The slow update option is also needed, but this is moving
to depthcharge so it is not defined here.
Change-Id: I046661fae7315f84e96293532b4e1568558df962
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If the command does not respond the driver should not wait for
it to complete before returning.
Tested with SMI debug enabled to ensure that the final command
does not report a failure.
Change-Id: I7c1bfa19a92e8332ac1aa6ff95f94ff4cbdf789d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update the Kconfig option for disabling ESPI SMI source
to disable it entirely, not just when ACPI mode is disabled.
For the situations where this is needed (just the sarien
board) it is better to completely stop the EC from sending
any SMI events as no actions are taken.
Change-Id: Id94481bb2f0cfc948f350be45d360bfe40ddf018
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add bluetooth Rfkill function to recover the Bluetooth controller in
cases where itself has entered a bad state and needs to be recovered.
Bug=b:123342945
TEST=Boot up into OS and dump SSDT table, check there's _DSD entry under
Bluetooth devices with GPIO in.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ibbe67887227af42b6c040deade7bf5da4ce3227f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Initialize the clock of the Gigabit Ethernet Controller.
Change-Id: I172dc518c9b48c122289bba5a65beece925410d4
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Disable the use of AMD's Secure OS through the Kconfig option.
BUG=chromium:903833
TEST=Build google/aleena, verify types 02, 0c, 0d are removed
from PSP directory table
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Iabb0632eef88170dde45dea2e2e15b54b3a06f7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Fix a spelling error in the name.
TEST=Build google/aleena and compare amdfw.rom before/after
Change-Id: I727ba1d6a8991caa1cdddcfca94c55c73954320a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch overrides required LPSS FSP UPDs for CMLRVP from devicetree.cb
File devicetree-override.cb will override required UPDs and is only
applicable to CML soc for now
Change-Id: I82e3323df952762e2d9c14f1e3cfa75872ccc9b4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31285
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch creates new resource function to perform allocation
of IO resource, similar to mmio_resource() function does for MMIO.
Change-Id: I3fdcabb14302537d6074bfd6a362690c06b66bb5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
This patch adds required FSP UPD changes for CometLake SoC.
Also this patch tries to create common parse logic for CometLake as
well as cannonlake SOC.
We parse device tree parameters for PCI devices and fill values in FSP
UPDs. We fill UPDs based on pci device config as well as SerialIoDev
config of devicetree.
For PCI devices, if PCI device is disabled from devicetree, we'll assign
disable value to FSP UPD.
In case devicetree doesn't fill this parameter or value is invalid in
SerialIoDev config, default mode will be set to PCI.
In case of valid value, we'll fill the same value into FSP UPD.
BUG=none
BRANCH=none
TEST=check if CML board boots and proper UPD values are filled.
Change-Id: Ib92b660409ab01d70358042b2ed29b8bf9cab26d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
We were used to set the same values in the system and board tables.
We'll keep the mainboard values as defaults for the system tables,
so nothing changes unless somebody overrides the system table hooks.
Change-Id: I3c9c95a1307529c3137647a161a698a4c3daa0ae
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
In the current state of the tree we do not utilise the
mechanism of having per-device overrides for PCI bus
ops.
This change effectively inlines all PCI config accessors
for ramstage as well.
Change-Id: I11c37cadfcbef8fb5657dec6d620e6bccab311a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
By changing the signatures we do not need to define
PCI config accessors separately for ramstage.
Change-Id: I9364cb34fe8127972c772516a0a0b1d281c5ed00
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Move ChipsetFspReturnPoint() to drivers/intel/fsp1_0.
Allows to have a common entry after FSP-M.
Change-Id: I064ae67041c521ee92877cff30c814fce7b08e1f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
When VBOOT_STARTS_IN_BOOTBLOCK is selected, the tpm_setup call
in memory_init.c is not used.
When VBOOT_STARTS_IN_ROMSTAGE is selected, the tpm_setup call
in memory_init.c is triggered. However, when verstage runs,
tpm_setup is called yet again, and an error is triggered from
the multiple initialization calls.
Since there are currently no boards using
VBOOT_STARTS_IN_ROMSTAGE + FSP2_0_USES_TPM_MRC_HASH, disable
this combination via Kconfig, and remove the tpm_setup call
from Intel FSP memory initializion code.
* VBOOT=y VBOOT_STARTS_IN_BOOTBLOCK=y
vboot is enabled, and TPM is setup prior to Intel FSP memory
initialization. Allow FSP2_0_USES_TPM_MRC_HASH option.
* VBOOT=y VBOOT_STARTS_IN_BOOTBLOCK=n
vboot is enabled, but TPM is setup in romstage, after Intel
FSP memory initialization. Disallow FSP2_0_USES_TPM_MRC_HASH
option.
* VBOOT=n
vboot is disabled. Disallow FSP2_0_USES_TPM_MRC_HASH option.
See bug for more information:
https://bugs.chromium.org/p/chromium/issues/detail?id=940377
BUG=chromium:940377
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I4ba91c275c33245be61041cb592e52f861dbafe6
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31837
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CNL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
BUG=b:128482282
TEST=Verified that prev_sleep_state is reported correctly when booting
from S5.
Change-Id: I75780a004ded8f282ffb3feb0cdc76233ebfd4f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31908
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To ensure the power button functions as expected in firmware ensure
that the EC is not in "S0ix supported OS" mode and expecting the
power button to be handled by the virtual button interface.
BUG=b:128409889
TEST=Verify that the power button works at the developer screen
when the system is rebooted from within Chrome OS. Also ensure
that it works when external warm reset signal is asserted by H1.
Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Symbols prefixed with vb2_ should be reserved for internal
vboot library use.
Anything outside of that may choose some other prefix.
Here, we choose vboot_ instead.
Also, add some documentation to security/vboot/misc.h,
which provides headers for a number of different C files.
BUG=b:124141368
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I5d9154fd2d5df25ee254bd5ce4a173afaa6588be
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31886
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LM96000 is the successor of the famous LM85.
Change-Id: Ie7df3107bffb7f8e45e71c4c1fbe4eb0a9e3cd03
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/21194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Just another hardware-monitoring chip. Only limited fan control and PECI
configuration is implemented.
Change-Id: I35ea79e12941804e398c6304a08170a776f4ca76
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In case PCI_IO_CFG_EXT=n parameter 'reg' was not
properly truncated to 8 bits and it would overflow
to dev.fn part of the register.
A similar thing could happen with 'dev' but that
value originates from PCI_DEV() macro unlike 'reg'.
Change-Id: Id2888e07fc0f2b182b4633a747c1786e5c560678
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31847
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Accoriding to 574354, we need to tune each port to pass eye diagram
other than just use recommanded setting as they are base guidence only.
Bug=b:124407280
TEST=Build and boot up on arcada board.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I587695809b368edd33852c4241de097ca31e9d66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31632
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For platforms that do not employ VBOOT_STARTS_IN_ROMSTAGE,
vboot verification occurs before CBMEM is brought online.
In order to make vboot data structures available downstream,
copy vb2_working_data from CAR/SRAM into CBMEM when CBMEM
comes online. Create VBOOT_MIGRATE_WORKING_DATA config
option to toggle this functionality.
BUG=b:124141368, b:124192753
TEST=Built and deployed on eve with STARTS_IN_BOOTBLOCK
TEST=Built and deployed on eve with STARTS_IN_ROMSTAGE
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
BRANCH=none
Change-Id: I62c11268a83927bc00ae9bd93b1b31363b38e8cf
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
By design only 'reg' parameter can have the two least-
significant bits set. As 'reg' is often a constant,
'0xCFC + (reg & 3)' resolves to an immediate value
already at buildtime, unlike (addr & 3) which depends
of a constant (but non-immediate) value of 'dev' in
ramstage.
Change-Id: I6e729fe800c92b1ce4994ad2b4203072fa75a958
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31754
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The copyright notices of Eltan B.V. have been removed by mistake before
sending the patch with board support. Revert back to be consent with the
license.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic5948ab60a661ef78e4e5c8571535a096fc88ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
From doc#573387 CML System Memory DQ DQS Rcomp Mapping Information
User Guide, RCompResistor[0] should be 121.
BUG=b:122959294
BRANCH=None
TEST=emerge coreboot and make sure boots up
Change-Id: If69e7fb41e79d88d21b0e50fb65107a1686d696a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31868
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MEM_CH_SEL is used to indicate whether we are on a single or dual
channel device, where MEM_CH_SEL = 1 for single channel skus and
MEM_CH_SEL = 0 for dual channel skus. Initialize single_channel field
(from GPP_F2), which will in turn initialize MemorySpdPtr pointers in
cannonlake soc code. In the first build, we did not use GPP_F2, so we
need to add an internal pulldown as those early devices were all dual
channel devices.
BUG=b:123062346, b:122959294
BRANCH=None
TEST=Boot into current boards and ensure that we have 2 channels as expected
Also, verify that GPP_F2 is set to 0.
Change-Id: I89d022793580be603a93d0b177d73ce968529b5c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The board version is part of EC's EEPROM, select Kconfig items to enable
requesting the EC for board version.
BUG=b:128385395
TEST=Verified the mainboard version is from EC's EEPROM.
Change-Id: I4bc1cac43c6cf73522f3a4bee89cc000a430d996
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31858
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Port commit f1395d82: "ec/lenovo/h8: Add USB Always On" to the Thinkpad
x1_carbon_gen1 board as well, as it seems to work fine on all
generations.
See also commit 7ffb329f with Change-Id
I6dcbfaae2a444d9a679ecb64a87dc2a59b8fd281 ("mb/lenovo/*/cmos: Port USB
Always On").
Note that we don't need to call h8_usb_always_on() directly since commit
4f4322dd with Change-Id If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a
("lenovo/h8,thinkpads: Re-do USB Always On").
Change-Id: Ib9070b659b0c9ad5dde4200ec2845c6fa2b78b25
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicola Corna <nicola@corna.info>
Like with any other Thinkpad, call MUTE(1) and USBP(0) on _PTS on the
Lenovo Thinkpad X1 Carbon 1st generation.
Without MUTE(1) the speakers sometimes glitch before going into S3 (if not
muted), while without USBP(0) the USB ports are always powered in S3,
regardless of the USB Always-On mode selected.
Change-Id: I86f3c5a72e2589c5570303bf68f39df3ef874cb8
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Before start sorting check for the number of entries in the data set. If
there are less than two entries, sorting makes no sense.
Change-Id: Ib9d5522cdebb6559a025217f7faf318589d55a2c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Sorting makes only sense if there are at least two entries available.
Change-Id: If40638bf1fe24dcff4b7839967445fb4218184f8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This change reads DRAM part number from EEPROM if available and
returns it using the SoC callback (mainboard_get_dram_part_number).
BUG=b:127609572
TEST=Verify that DRAM part number from EEPROM is added to DMI table
17 (dmidecode -t 17).
Change-Id: I6ade6999828b6d67aa78d04199138f195a97ba8c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on hatch.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:127609572
Change-Id: I9b2d4c33fc378b9a24b111971ec2bfdb5f8d57d0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31850
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
One could understand 'where' as bus, device, function
or register. Make it clear it is register.
Change-Id: I95d0330ba40510e48be70ca1d8f58aca66c8f695
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch adds a generic provision into FSP2.0 driver to implement
dedicated PEIM to PEIM interface as per Intel FSP requirement.
Change-Id: I988d55890f8dd95ccf80c1f1ec2eba8196ddf9a7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Adding Hatch_whl as a variant of hatch. This is a snapshot of the WHL
version of hatch so that we can rebuild the bios images for Hatch with
WHL SoC.
BUG=b:127310803
BRANCH=NONE
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
make sure HATCH_WHL is built as well.
Change-Id: I24510fa226878582a61f1846f0b56a2c65204a92
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Following changes are done to enable audio support on hatch
1. Enable I2C4 device at 400Khz at 1.8V
2. Configure GPIO for HP INT and SPKR_PA_EN
3. Add ACPI entry for RT5682 and MAX98357A
4. Enable I2S0 and I2S1 lines
5. Enable generic max98357a driver in Kconfig
BUG=b:123738217
BRANCH=none
TEST=Check SSDT table for RT5682 & MAX98357a entry.
Verify audio using Sound Open firmware (SOF)
Change-Id: I93f3917c19cc3f0f8fd7b5e1b4d9b24a59f45f84
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The r8152 kernel driver is expecting the AMAC() method to return
a raw buffer, not a string. To fix this simply remove the
ToString() in the return statement that was converting the buffer
to a string.
BUG=b:123925776
Change-Id: I7cd4244a1ccc7397d5969b817a52ea48867b4d17
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31807
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the
initialization of the programmable interrupt controller (PIC) for
faultless operation. The PIC mode is need for USB support (e.g.
keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM).
Therefore add setup_lapic() to configure the APIC.
Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In preparation for the transition of hatch from WHL to CML, we are
creating a checkpoint called hatch_whl that we can use for creating
firmware compatible with the WHL hatch variant.
BUG=b:127310803
BRANCH=NONE
TEST=NONE
Change-Id: Iecae584ee6feefcf29955a4720e9c24bdc8abe6d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds support for logging wake source information in gsmi
callbacks. With this change, all the elog logging infrastructure can
be used for S0ix as well as S3 on cannonlake.
BUG=b:124131938
BRANCH=none
TEST=Verified that the wake events are logged during the S0ix resume:
6 | 2019-03-04 17:03:13 | S0ix Enter
7 | 2019-03-04 17:03:17 | S0ix Exit
8 | 2019-03-04 17:03:17 | Wake Source | RTC Alarm | 0
9 | 2019-03-04 17:03:55 | S0ix Enter
10 | 2019-03-04 17:03:56 | S0ix Exit
11 | 2019-03-04 17:03:56 | Wake Source | GPE # | 21
12 | 2019-03-04 17:04:36 | S0ix Enter
13 | 2019-03-04 17:04:45 | S0ix Exit
14 | 2019-03-04 17:04:45 | Wake Source | GPE # | 112
15 | 2019-03-04 17:05:01 | S0ix Enter
16 | 2019-03-04 17:05:09 | S0ix Exit
17 | 2019-03-04 17:05:09 | Wake Source | Power Button | 0
Change-Id: Id627843e22c2524dfa94395b780cf2134f386137
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
BUG=b:124131938
BRANCH=none
TEST=none
Change-Id: If24c3feeb77f4fb692ef0bf38d537b2b54de3c36
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Create the way of adding the discrete VGA OpROM at config UI (alternative to
./cbfstool ./cb.rom add -f vgabios_dgpu.bin -n pci1002,6663.rom -t optionrom )
DGPU options are accessible only if CONFIG_VGA_BIOS is enabled.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I0a7bf0fe95c833cf3df0c7cb20fc27b6ab218c5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch adds timestamp for "end of romstage" with postcar if platform
has selected postcar as dedicated stage.
If postcar stage doesn't exist then "end of romstage" timestamp will get
call while starting of ramstage as exist today.
TEST=It's been observed that "end of romstage" timestamp doesn't appear
in "cbmem -t" log when ramstage is not getting executed. As part of this fix
"end of romstage" timestamp is showing in "cbmem -t" log on Intel platform
where POSTCAR is a dedicated stage.
Change-Id: I17fd89296354b66a5538f85737c79145232593d3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds dedicated timestamp value for postcar stage.
TEST=Able to see "start of postcar" and "end of postcar" timestamp
while executing cbmem -t after booting to chrome console.
> cbmem -t
951:returning from FspMemoryInit 20,485,324 (20,103,067)
4:end of romstage 20,559,235 (73,910)
100:start of postcar 20,560,266 (1,031)
101:end of postcar 20,570,038 (9,772)
Change-Id: I084f66949667ad598f811d4233b4e639bc4c113e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CPU PM TIMER EMULATION logic will help UEFI payload to execute rather
wait for time tick in absence of TCO and ACPI PM timer after FSP-S.
BUG=N/A
TEST=Able to build and boot with tianocore payload.
Change-Id: I7fd11e728b7a14f41f08bc39bcd92a42a8aa6cff
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rename VB2_DISABLE_DEVELOPER_MODE to VB2_CONTEXT_DISABLE_DEVELOPER_MODE.
See CL in CQ-DEPEND for details.
BUG=b:124141368
TEST=Build locally
CQ-DEPEND=CL:1460645
BRANCH=none
Change-Id: Ib9754425dc2f346e8edac584c4d076d13ae31d2d
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Rename VB2_SD_DEV_MODE_ENABLED to VB2_SD_FLAG_DEV_MODE_ENABLED.
See CL in CQ-DEPEND for details.
BUG=b:124141368
TEST=Build locally
CQ-DEPEND=CL:1460644
BRANCH=none
Change-Id: I298cd3a5026055e439de1ce409e61f1feb24369b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The IS_ENABLED() macro is pretty long and unwieldy for something so
widely used, and often forces line breaks just for checking two Kconfigs
in a row. Let's replace it with something that takes up less space to
make our code more readable. From now on,
if (IS_ENABLED(CONFIG_XXX))
#if IS_ENABLED(CONFIG_XXX)
shall become
if (CONFIG(XXX))
#if CONFIG(XXX)
Change-Id: I2468427b569b974303084574125a9e1d9f6db596
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change the amdfwtool command line arguments to use the new --subprogram
option.
TEST=Verify amdfw.rom is unchanged before and after the conversion
BUG=b:126691068
Change-Id: Iaae4094251974b8dad48b8d2c37bb2e43a412237
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31736
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To prepare for consolidating amdfwtool command-line options, change
the stoneyridge makefile to use the ones that will be kept. By using
the new --combo-capable option, the PSP directory's pointer still
appears in the correct location within the the Embedded Firmware
structure.
TEST=Confirm amdfw.rom file is unchanged before/after when building
google/grunt
BUG=b:126691068
Change-Id: Ia31ebdcb8c392d75c56811b60f1ae673f7ba79cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31730
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Until now the TCPA log wasn't working correctly.
* Refactor TCPA log code.
* Add TCPA log dump fucntion.
* Make TCPA log available in bootblock.
* Fix TCPA log formatting.
* Add x86 and Cavium memory for early log.
Change-Id: Ic93133531b84318f48940d34bded48cbae739c44
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This patch adds support H110 chipset (Sunrise Point) for Skylake and
Kaby Lake processor families by adding the corresponding IDs. It has
been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU).
Change-Id: I85ba65ac860687b0f9fd781938e5cac21a1b668d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31602
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support
1) Intel(R) Xeon(R) E3 - 1200/1500 v5/6th Gen Intel(R) Core(TM) Host
Bridge/DRAM Registers - 191F;
2) HD Graphics 530 Skylake GT2 - Intel integrated graphics processor
https://en.wikichip.org/wiki/intel/hd_graphics/530.
This is required to run coreboot on the Intel Core i5-6600 (Skylake)
desktop processor. It has been tested on ASRock H110M-DVS motherboard.
Change-Id: If47e9ac32813a9f73d3a23f44536f60d1003971d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31601
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel Braswell P-UNIT is missing in pci_devs.h
Add PUNIT device, function and device ID
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I80c87c8964b3ba830571e0c03c424b67729a0c1a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31711
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new Pantheon sku-id for loading vbt-pantheon.bin
BUG=b:78663963
BRANCH=firmware-nami-10775.B
TEST=Boots to OS and display comes up.
Change-Id: Icd56905e1e04de6f307393ae23f741b93ff23a4c
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31747
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We want to publish "arcada_ish.bin" as the fw name for Integrated
Sensor Hub (ISH) so the kernel shim loader code can use it to
construct the correct path in /lib/firmware/intel for the firmware
load process.
BUG=b:122722008
TEST=Verify that shim loader CLs use new value when constructing
firmware path
Change-Id: I6299de82566a3bad8521f8158bb047d5c1ff0cf8
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We want to be able to specify the firmware variant suffix
in the devicetree.cb configuration for particular firmware
builds. This driver allows us to specify the firmware_variant
property in the device tree and have it populate a _DST table
in the SSDT ACPI table for the ISH device, thus making the
suffix available to the kernel (See crrev.com/c/1433482 for kernel
change that uses the value)
BUG=b:122722008
TEST=decompile DDST table and verify that new firmware-variant value
is present. Also verfied that kernel can access this new field using
the shim loader kernel CLs
Change-Id: Id8be986185282521aee574027503eaf8968e1508
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Make GDT a separate table and don't reuse GDT descriptor as unused
first field of GDT.
Required for separate x86_64 GDT descriptor, pointing to the same
GDT.
Tested on qemu.
Change-Id: I513329b67d49ade1055bc07cf7b93ff2e0131e0b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31769
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are two known reverse-engineered ways to manage battery
thresholds.
This patch implements them and adds a way to enable them for
different mainboards.
Tested on W530 with 4.18.3-gentoo kernel and X220 with 4.20.11.
Works fine with new Linux userspace API for controlling battery
thresholds, available since 4.17.
(/sys/class/power_supply/BAT0/charge_(start|stop)_threshold).
The new API is supported by TLP (you might need to set NATACPI_ENABLE=1
in /etc/tlp.conf).
tpacpi-bat works fine too.
Signed-off-by: Alexey Kharlamov <der@2-47.ru>
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Change-Id: I2a90f9e9b32462b8a5e9bc8d3087ae0fea563ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/23178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Fail builds if MRC blobs pool heap would get corrupted
by CAR relocatable data from coreboot proper.
Add runtime logging how much pool was required.
Change-Id: Ibc771b592b35d77be81fce87769314fe6bb84c87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31150
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Inlining here allows the check for (dev != NULL) to be
optimised and evaluated just once inside the calling
function body.
Change-Id: I0b5b4f4adb8eaa483a31353324da19917db85f4a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change adds support for the SuperIO chip IT8613E. This chip uses
FANs 2-5 and has SmartGuardian always enabled (no ON/OFF control) so
it relies on support in common ITE code. LDNs were taken from IT8613E
Preliminary Specification V0.3.
Change-Id: I73c083b7019163c1203a5aabbef7d9d8f5ccb16a
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This IS_ENABLED(XXX) line should've clearly been IS_ENABLED(CONFIG_XXX).
This patch can fix that. However, I don't have (and don't plan to
acquire) an affected system to test, so approve at your own risk (or
let me know if I should just remove that check instead).
Change-Id: I79a0fca65853798ee45c3779b437864ba3cf2b1e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This IS_ENABLED(XXX) line should've clearly been IS_ENABLED(CONFIG_XXX).
This patch fixes the issue. Not tested on a real board, but looking at
the affected code paths suggests that this will result in no effective
change anywhere (since CAR should already be torn down by the time this
is called on FSP1.0 boards, so do_car_migrate_variables() would have
immediately exited anyway).
Change-Id: I74e0ed4d04471ee521ff5c69a74a6f4c949e5847
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
For Chrome OS (or vboot), The PRESERVE flags should be applied on
following sections:
RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE,
RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768),
SI_PDR (chromium:936768)
With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in
the future. But it's still no harm to use it if there are multiple
sections all needing to be preserved.
BUG=chromium:936768
TEST=Builds google/eve and google/kukui inside Chrome OS source tree.
Also boots successfully on eve and kukui devices.
Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Qemu does not have a real CAR but postcar stage is still useful
for testing the stage.
The postcar stage is also mandatory for x86_64 to setup
pagetables for x86_64 ramstage.
Do not set up MTRRs, as qemu ignores them anyways.
Tested on qemu-i440fx and qemu-q35.
Change-Id: I6638534d99fde312e55b6a6be8c95e4cb25cca80
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Intel Braswell SoC contains SMBus controller but no support
is available for this controller.
This controller is compatible with the Intel SMBus support in the
southbridge common directory.
To be able using smbus support from the Intel common directory
the smbus.c is moved outside SOUTHBRIDGE_INTEL_COMMON
dependency block.
Use SOUTHBRIDGE_INTEL_COMMON_SMBUS to include support.
BUG=N/A
TEST= Facebook FBG-1710 LCD panel
Change-Id: Ie3d4f657558a1aed21b083ef5cad08ea96e629c3
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The function (preprocessor macro) we need is defined
in <endian.h> not <swab.h>.
Change-Id: I3a86c7050bf853e3a56a15421132240e19f40912
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31704
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes indirect includes that would break with followup work.
Change-Id: I37ca01b904a0b422a4d09475377e755e167a6ab3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Provide clean separation for PCI and PNP headers,
followup will also move PNP outside <arch/io.h>.
Change-Id: I85db254d50f18ea34a5e95bc517eac4085a5fafa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
These resolved to <device/oprom/include/io.h> which
included <arch/io.h> that we really wanted.
Change-Id: I9aa0bdf34cd1d53e20b4494c7986f0878f4fd840
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31693
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the support for providing a MAC address for a dock to use based on
the VPD values set in the platform.
BUG=b:123925776
TEST=tested on sarien by setting VPD values and observing the string
returned by the AMAC() method:
> vpd -i RO_VPD -s "ethernet_mac0"="AA:AA:AA:AA:AA:AA"
> vpd -i RO_VPD -s "dock_mac"="BB:BB:BB:BB:BB:BB"
1) Test with no policy set, returns "dock_mac"
ACPI Debug: "VPD region RW did not verify"
ACPI Debug: "Found VPD KEY dock_mac = BB:BB:BB:BB:BB:BB"
ACPI Debug: "MAC address returned from VPD: BB:BB:BB:BB:BB:BB"
ACPI Debug: "AMAC = _AUXMAC_#BBBBBBBBBBBB#"
2) Test with policy set to "builtin", returns nothing
> vpd -i RW_VPD -s "dock_passthru"="builtin"
ACPI Debug: "Found VPD KEY dock_passthru = builtin" [AMAC returns Zero]
3) Test with policy set to "ethernet_mac0"
> vpd -i RW_VPD -s "dock_passthru"="ethernet_mac0"
ACPI Debug: "Found VPD KEY dock_passthru = ethernet_mac0"
ACPI Debug: "Found VPD KEY ethernet_mac0 = AA:AA:AA:AA:AA:AA"
ACPI Debug: "MAC address returned from VPD: AA:AA:AA:AA:AA:AA"
ACPI Debug: "AMAC = _AUXMAC_#AAAAAAAAAAAA#"
4) Test with policy set to "dock_mac"
> vpd -i RW_VPD -s "dock_passthru"="dock_mac"
ACPI Debug: "Found VPD KEY dock_passthru = dock_mac"
ACPI Debug: "Found VPD KEY dock_mac = BB:BB:BB:BB:BB:BB"
ACPI Debug: "MAC address returned from VPD: BB:BB:BB:BB:BB:BB"
ACPI Debug: "AMAC = _AUXMAC_#BBBBBBBBBBBB#"
Change-Id: I90474e264cc433c0fd1a4b0dbaf98e5f74180d54
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
This change adds support for providing a MAC address that can be used
by the OS network drivers to change the MAC address that a NIC uses.
The Realtek r8152 driver in the Linux kernel supports a MAC address
passthru feature which can result in the dock ethernet port using the
same MAC address that is assigned to the internal NIC. This is done
by calling an ACPI method at \_SB.AMAC() which returns a formatted
string containing the MAC address for the dock to use.
The Linux kernel implementation can be found at
drivers/net/usb/r8152.c:vendor_mac_passthru_addr_read()
This is implemented specifically for Chrome OS as it relies on VPD
to determine the MAC address to supply.
The policy which controls where the dock MAC address comes from is
written into RW_VPD property "dock_passthru":
"dock_mac" or empty: Use MAC address from RO_VPD value "dock_mac"
"ethernet_mac0": Use MAC address from RO_VPD value "ethernet_mac0"
"builtin": existing dock MAC address (return nothing)
The MAC address in VPD is the standard format AA:BB:CC:DD:EE:FF and
it must be converted into the string format expected by the OS which
involves some string manipulation which ACPI is not great at handling.
BUG=b:123925776
TEST=this was tested on a sarien board by setting the VPD keys to
their expected values and observing if the AMAC() method returns the
expected string.
Change-Id: I3335e5d924155431e299844e2aaace62168294e0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
This ACPI device presents an interface that allows other ACPI devices
or methods to read VPD strings. The VPDF() method is provided the
VPD partition to look in, and the name of the VPD key to find and it
will return the VPD string if it exists.
For example: VPD.VPDF ("RO", "serial_number")
BUG=b:123925776
TEST=this was tested on a sarien platform by adding ACPI code that
searches for a VPD key and returns the value it finds, and then setting
that VPD string from the OS with the Chrome OS 'vpd' utility to ensure
the ACPI method returns the correct value.
Change-Id: I4668f66d7f7f364ac8c3b064d406b24135abb0f6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Store the memory address of VPD region start and length for the memory
mapped RO_VPD and RW_VPD into GNVS so they can be used by ACPI code.
BUG=b:123925776
TEST=boot on sarien and verify VPD start/length in GNVS
Change-Id: I39073a9d78f5ff60bfe088860c087a5167f05fdf
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Move common definitions for PCH H and LP to a common header.
Change-Id: If47692ecb05134db1ee6c0fb10125d6a1b67f127
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31621
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the ISH ACPI device so we can hang fields off of a _DSD table.
Since this is also a PCI device that has run time probing, we can always
emit the ACPI device and let the device tree turn the device on or off.
BRANCH=none
BUG=b:122722008
TEST=verify that _DSD table gets publish under ISH device in kernel ACPI
tables. Also verified that device is still turned off if device tree for
ISH is off.
Change-Id: Ic0231f1ac637fea0e251eb3ac84f0fd8d64c12b2
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31681
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The following remarks show up during cannonlake based platform coreboot
build:
dsdt.asl 55: Offset (0x00),
Remark 2158 - ^ Unnecessary/redundant use of Offset operator
dsdt.asl 136: Offset (0xa8),
Remark 2158 - ^ Unnecessary/redundant use of Offset operator
Address those two remarks in coreboot.
BUG=N/A
TEST=Build coreboot and check build log to see no more remark.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Iad660347b32d90ac1176654820375e30a21b5ffe
Reviewed-on: https://review.coreboot.org/c/31666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Using ACPICA version 20180927 or greater, IASL detects Unnecessary/redundant
uses of the Offset() operator within a Field Unit list.
It then sends a remark "^ Unnecessary/redundant use of Offset".
Offsets refer to the current offset are unnecessary.
example:
OperationRegion (OPR1, SystemMemory, 0x100, 0x100)
Field (OPR1)
{
Offset (0), // Never needed
FLD1, 32,
Offset (4), // Redundant, offset is already 4 (bytes)
FLD2, 8,
Offset (64), // OK use of Offset.
FLD3, 16,
}
We will have those remarks:
dsdt.asl 14: Offset (0),
Remark 2158 - ^ Unnecessary/redundant use of Offset
operator
dsdt.asl 16: Offset (4),
Remark 2158 - ^ Unnecessary/redundant use of Offset
operator
Change-Id: If53072c6a91dd794c70d1fab8697b1713d400fe8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
IASL version 20180927 and greater, detects Unnecessary/redundant uses of
the Offset() operator within a Field Unit list.
It then sends a remark "^ Unnecessary/redundant use of Offset"
example:
OperationRegion (OPR1, SystemMemory, 0x100, 0x100)
Field (OPR1)
{
Offset (0), // Never needed
FLD1, 32,
Offset (4), // Redundant, offset is already 4 (bytes)
FLD2, 8,
Offset (64), // OK use of Offset.
FLD3, 16,
}
We will have those remarks:
dsdt.asl 14: Offset (0),
Remark 2158 - ^ Unnecessary/redundant use of Offset
operator
dsdt.asl 16: Offset (4),
Remark 2158 - ^ Unnecessary/redundant use of Offset
operator
Change-Id: Ie1f2a2ace335af7984209c9e286b9f85e5342a7e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31671
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When updating firmware, we may need to preserve some sections like VPD,
calibration data, ... etc. The logic can be hard-coded in updater as a
list of known names, but a better solution is to have that directly
declared inside FMAP area flags.
To do that, the first step is to apply the changes in flash map
(http://crosreview.com/1493767). A new FMAP_AREA_PRESERVE is now
defined and will be set in future with new syntax in FMD parser.
BUG=chromium:936768
TEST=make; boots an x86 image.
Change-Id: Idba5c8d4a4c5d272f22be85d2054c6c0ce020b1b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Local APIC was not configured.
Add setup_lapic() to configure the APIC.
BUG=N/A
TEST= Ubuntu 4.15.0 reports correct local APIC information
on Intel CherryHill CRB
Change-Id: Ic1da5b1bf235f34b957142e86c70a9dbfa3ded1d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
HDA support did not configure the codecs correclty.
Use Intel common block support to configure the codecs.
To use common Intel HDA support file hda.c file has been
removed and Braswell HDA device ID is added to list of
supported PCI devices in intel/common/block/hda/hda.c.
CONFIG_SOC_INTEL_COMMON_BLOCK and
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA are enabled
to include hda.c in build.
When codec table is available at board level
SOC_INTEL_COMMON_BLOCK_HDA_VERB must be enabled
and a codec table must be supplied.
BUG=N/A
TEST=Facebook FBG-1701 ALC298 configuration
Change-Id: I5c23ec311e5b5a6dfd6f031aa19617407fe8ed63
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Since ACPI v2.c, this field is access_size.
Currently, coreboot is using ACPI v3,so we can drop '.resv' field.
Change-Id: I7b3b930861669bb05cdc8e81f6502476a0568fe0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use a single group for all CONFIG_PCI=y sources.
Change-Id: I426f4398c01dfbf03b9dd2db8c7a964512c86d5e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31680
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A default is a build-time static value, fallback. Return
value does not depend of input parameter.
Change-Id: I43ae28f465fb46391519ec97a2a50891d458c46d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31679
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop the bus parameter, we do not use it.
It would still be possible to do per-bus selection
by evaluating the bus number, but currently we do
not have need for that either.
Change-Id: I09e928b4677d9db2eee12730ba7b3fdd8837805c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Having different signatures for the PCI config accessors
prevents them from having the same name in different
stages.
For now, work around this using __SIMPLE_DEVICE__.
Change-Id: I20f56cfe3ac7dc4421e62a99ca91f39a857c0ccf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch makes the way to protect flash regions selectable. If you
don't want to use ifdtool for modification of flash descriptor, enable
the new option. Otherwise, the previous config settings for all
mainboards will be retained.
Change-Id: I46ec6339008edcc78fe76682eed5714f85354937
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
As we are running ACPI v3.0, references to older
than v3.0 are removed.
Change-Id: I0cce0035ed2b952d59cc1a4a9e6017dae67ef6db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Applying microcode updates a second time seems to be only necessary
on newer platforms (Nehalem+) for "uncore" updates.
Change-Id: Ia2ee9c70677190ffd1a08df1101d39a14fc2c384
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Masanori Ogino <masanori.ogino@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
We load it once for the BSP in advance and let the MP init handle it for
the APs. The BSP load could also be done earlier, e.g. before CAR setup,
to align with other platforms.
TEST=Booted ThinkPad X200s and checked log: Microcode is loaded
correctly on the BSP before SMM setup, and reported to be up
to date on all cores after.
Change-Id: I85adb22a608ca3e7355bd486ebba52ec8fdd396c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Some ITEs have more than 3 independent FAN controller outputs. As the
initial implementation assumed only 3 outputs some registers are not
consequently numbered. This change adds macros for accessing those
registers.
Additionally some chips have SmartGuardian always enabled, without the
option for turning it off. For these chips bits that were responsible
for ON/OFF control are either reserved or have different meaning.
Another Kconfig option is added to disable ON/OFF functionality on
platforms that do not support it.
Change-Id: Icd60a16b6b5583a3b981bdc220aac472c2a8f40f
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/31616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There was CONFIG_ prefix missing in SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG
option, this patch fixes it.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Change-Id: I52919671569175141560cb73e42344aa1725c112
Reviewed-on: https://review.coreboot.org/c/31674
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to prevent keyboard keys pressed at boot from causing issues
in the payload remove the PS2 keyboard driver so it does not get
initialized until it is needed in libpayload.
This was enabled initially because the keyboard controller on this
platform does not come up in translated mode, so unless coreboot
called keyboard_init() the keyboard would never work properly in the
kernel because it would come up as an "AT Raw" device instead of an
"AT Translated" device.
Instead of initializing the keyboard in coreboot a workaround is
added to the payload to put the keyboard into translated mode.
BUG=b:126633269
TEST=boot on sarien while pressing keys and ensure libpayload and/or
the kernel does not have any issues initializing the keyboard.
Change-Id: I765e808f0d2589cf23c0349798a07e2706a2a7a4
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We had two ways to configure the serial IRQ mode. One time in the
devicetree for FSP and one time through Kconfig for coreboot. We'll
use `enum serirq_mode` from soc/intel/common/ as a devicetree option
instead. As the default is `quiet mode` here and that is the most
common mode, this saves us a lot of lines.
In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting
settings in devicetree and Kconfig. We'll maintain the `continuous`
selection, although it might be that coreboot overrode this earlier
on the kblrvps.
Note: A lot of Google boards have serial IRQ enabled, while the pin
seems to be unconnected?
Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
INT_MODEL defined in ACPI 1.0 and renamed to reserved since V 2.0.
The value for this field is zero but 1 is allowed to maintain
compatibility with ACPI 1.0.
So set this value to zero as we are using greater version than ACPI 1.0.
Change-Id: I910ead4e5618c958a7989f4c309a3a4bb938e31a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29986
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds few more required EFI return status into FSP2.0
drivers so that coreboot code can make use of those.
Change-Id: I9f040e7b9232b05dfc34971afa190cc3cbd7192a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This mainboard has a TPM located on the LPC bus. Enable the driver for
it so that it is initialized and the ACPI table entry is generated.
Change-Id: I2eae63932658c2a9f752d28d7c08c27f48531360
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
On Sarien, change pin config of 0x19 (headset mic) and
0x21(headset headphone) to change jack location so that naming does
not use "Front" in the name."Front Headphone" --> "Headphone" so it
matches naming on Arcada.
BUG=b:126334749
TEST= verify with 'evtest' command that jack name is
"HDA Intel PCH Headphone" not "HDA Intel PCH Front Headphone"
Change-Id: I36ccf0c0a3952ab363fe6ee313fac8f0cce4dd61
Signed-off-by: Joyce Toh <joyce.toh@intel.com>
Reviewed-on: https://review.coreboot.org/c/31624
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The fdt in the maskrom cannot be used to start linux. The correct fdt
is dumped by replacing the bbl of the original firmware and used in
coreboot.
Correct the mac address in fdt by reading otp
Change-Id: Ic29f0e590311360b85fafd12ebc36cd189fbbc38
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/31047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Calculation of memory reserved by FSP is incorrect.
Use CBMEM_ID_FSP_RESERVED_MEMORY to determine the memory area
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: If68bda39ba2b1f3be4ed4bc872710be7bbd4948b
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Preliminary dptf change for Atlas
- Throttle charger using all temp sensors (not just ambient)
- Throttle charger with higher priority than CPU
- Update throttle temperature using data from surface thermistor
in thermal chamber test
BUG=b:113101335
BRANCH=None
TEST=based on preliminary data from thermal chamber test
Change-Id: Ic1ab72f569e8a4f7bffc5560518fb703d32f4b21
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Caveh Jalali <caveh@google.com>
The level/edge mode of PIRQ is not configured and i8259 PIC not initialized.
Add calls to:
- i8259_configure_irq_trigger()
- setup_i8259()
- write_pci_config_irqs()
to correct the configuration of interrupts.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: I128cb35dd0e348a9cd9fb162651e0aa2b7e4a3ef
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
IRQ10 and 11 are not available as _PRS in all LNKx ResourceTemplates.
These interrupt numbers are added to all LNKx.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ie7a263d7d50f7f85e6195777c1429dcc27a15604
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29287
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Static scan does not know the contents of the fixed MTRR descriptor, so
it has no way to eval the result for variable num_ranges. If num_ranges
is less or equal to 0, the for loop will not be entered, and the values
of fixed_msrs will not be set. Asserting that num_ranges is greater than
0 ensures the loop enters at least once.
BUG=b:112253891
TEST=build grunt
Change-Id: Ieec0ac432c745bde4b1700539c266625da6cfd77
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
These marketing names are much easier to distinguish. My
mnemonic: Socket M => up to Merom, Socket P => up to Penryn.
Change-Id: I3c2a59596cf7f3cd763bd79962ad326ab080677b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31645
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These came for the Socket 479 which is not supported anymore.
Change-Id: I0cf7ece028baa6750b79f54d615e93e452aff2e1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31644
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These sneaked in and were never supported by this socket (nor expected
in the notebooks that have it).
Change-Id: Iaeaf1d3bba213da56c7841cf6182e013626b8ca2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The name was wrong. mFCPGA478 is actually a pseudonym for mPGA478MN,
the successor of the socket that was meant.
The official name of this socket is mPGA478MT. But "Socket M" is much
easier to distinguish.
Change-Id: I4efeaca69acddfcdc5e957b0b521544314d46eeb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
