The following series always needs to access the functions
provided pci_rom.c.
Remove the dependency to CONFIG_VGA_ROM_RUN and depend on
CONFIG_PCI instead.
Change-Id: I6ed7ff5380edc7cd88dc1c71b43b1129a3de0f52
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14219
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This updates FSP UPD headers that adds new fields. Importantly
there are new FSPS UPD fields that allow to specify some BARs.
They are needed by FSP SiliconInit API to work properly.
Change-Id: Ie268c57c66b4d8fd6e00835916004058ff05762e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14217
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Certain security features on the platform use IMRs. Unfortunately
this memory is unusable for OS or firware. This patch marks IMR
regions as unusable.
Change-Id: I4803c41c699a9cb3349de2b7e0910a0a37cf8e59
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14245
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The ACPI base address was being programmed sepearately from
the other BARs in the PMC device. Group all the programming
together so there isn't separate paths for programming the
relevant BARs.
Change-Id: Ib17684397fc19c42b39d066f981c01a886d65235
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14320
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Restructure the nvm_is_write_protected routine to eliminate the dead
code error.
TEST=Build and run on Kunimitsu
Change-Id: Ia9170e27d4be3a34760555c48c1635c16f06e6a3
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14337
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
ACPI aware OS will need _PRT table to get desired interrupt
resource assigned and make device driver working. The logical
device within SOC gets fixed interrupt line.
Change-Id: I75141bd62ca2594b74983dff54912e0b20458b9a
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14243
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
A dedicated pci device driver required for LPC devices as the legacy
IO range need to be included to avoid IO resource confilict. Blindly
set to 0~0x1000 to also avoid the IO resource of COMA/COMB/LPT/FDD
and LPC.Without this driver system will have assertion on load
RTC DXE driver in UEFI payloads.
Change-Id: Icc462c159c2cf39cc1030d55acee79e73a6bfb35
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13356
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
ACPI MADT tables required to describe the multiprocessor interrupt
routing. Apollolake SOC also have the interrupt override table like
other x86 silicons.
Change-Id: I85976e227963c950aad4476d68581b96e1090559
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13373
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Two of the MCT data structures passed as substructures to ramstage were
not packed, and additionally no alignment was specified. On at least
SP5100-based platforms, specifying packed with no alignment caused boot
failure dependent on the exact compiled binary layout (LPC hang).
Specifying the alignment and packing the remaining structures appears to
have resolved the remaining LPC hang issues on the KGPE-D16. Note that
packing the remaining structures alone was not sufficient to eliminate
the hang, however removing the packed attribute entirely (during debugging)
did resolve the hang at the expense of potential problems in ramstage.
Change-Id: If3a7509ed438870d4d05caaaaa091e1c47bf9b97
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14303
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
This enables CACHE_MRC_SETTINGS by default as well selects
timer configuration.
Change-Id: I0248001892ef763c39097848b5adc8c1befed1f0
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14252
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The SPI controller needs to be set up on devices such as the SP5100
before it can be accessed to write MCT backup data. Move the backup
data write after PCI configuration has been completed.
Change-Id: Ibcf31755242ac058407a422ce8aa33d6b0b293c7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14305
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
ACPI MCFG table is required for OS to support Enhanced
Configuration Space Access.Apollolake will only support
1 PCI Segment Group, so all the pci bus number from 0
to 0xff will belong to that group.
Change-Id: I3a680eb9c83290cd531159d7e796382a132cd283
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13375
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implement flash read, write, and erase functionality using the
hardware sequencing capabilities of the SOC. Due to changes in
hardware requirements, the flash chip must be probed differently
than on previous platforms (details explained in comments).
Note that this is a minimal implementation, and does not provide all
the bells and whistles.
Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14246
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The delay_tsc.c compilation unit used the C preprocessor
to conditionally compile different code paths. Instead of
guarding large blocks of code allow the compiler to optimize
out unreachable code.
Change-Id: I660c21d6f4099b0d7aefa84b14f1e68d6fd732c3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14302
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The delay_tsc.c code took different paths depending
__PRE_RAM__ being defined or not. Also, timer_monotonic_get()
was only compiled in a !__PRE_RAM__ environment. Clean up
the code paths by employing CAR_GLOBAL for the global state
which allows the same code to be used in all stages.
Lastly, handle apollolake fallout now that init_timer() is
not needed in placeholders.c.
Change-Id: Ia769fa71e2c9d8b11201a3896d117097f2cb7c56
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14301
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The current code in delay_tsc.c uses globals and is heavily
guarded by a lot of preprocessor macros. In order to remove
__PRE_RAM__ constraints one needs to use CAR_GLOBAL for the
global variables. Therefore, abstract away direct access to
the globals such that CAR_GLOBAL can be easily employed.
Change-Id: I3350d1a762120476926c8d9f5f5a7aba138daf5f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14300
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
It's not selected by any path so it's a dead option with
associated dead code. Remove the config option as well as
the code paths that were never used any longer.
Change-Id: Ie536eee54e5c63bd90192f413c69e0dd2fea9171
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14299
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Myles Watson <mylesgw@gmail.com>
The LEDs on the beaglebone are connected to GPIOs called USR0-USR3. This
change adds some functions to make it easy to set their value and clear
what the calling code is trying to do.
Change-Id: I0bb83bbc2e195ce1a0104afcd120089efaa22916
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: https://review.coreboot.org/3943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add code for manipulating the GPIOs on the am335x. The API is patterned after
the one used for the Exynos SOCs.
Change-Id: I275317304bd0682f348f72f1c77ed5613065af3f
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: https://review.coreboot.org/3942
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
To avoid having to read/write raw addresses with magic constants,
this change adds data structures which represent the clock module
registers and some constants for how the clock module is used
currently.
Change-Id: I955dae39bbdabccf048a086e706a48c58f620ad4
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: https://review.coreboot.org/3941
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Always use MRC cache if possible.
Added a CRC16 array to make sure the DIMMs haven't been replaced.
In case one of the CRC's doesn't match, start normal RAM training.
Use new fallback in case of broken mrc cache.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
Test result:
The system boots a lot faster using the MRC cache.
On swapping DIMMs the CRC16 doesn't match and normal ram training
is started.
Change-Id: Ib48fe8380446846df17d37b22968f7d4fd6b9b13
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14172
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
On s3 wakeup h8_enable is called which resets the (audio) volume. But the
volume should be the same as before the s3 state. In particular, userland
programs (e.g. pulseaudio) may be out of sync, if the volume can be changed
by hardware buttons also emitting acpi events. Hence, do not reset the
volume on s3 wakeup.
Tested on a Lenovo ThinkPad X220.
Change-Id: I2af08dea1a3f14a40734d67d372e845cc18c5e09
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-on: https://review.coreboot.org/14183
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The removable DIMM SPD data wasn't read.
As a result the system only uses the 2GB onboard memory and
the GNU Linux kernel paniced in acpi_ds_build_internal_package_obj.
Read the SPD and allow native raminit and MRC blob to use the
removable DIMM.
The system is able to use the removable dimm and the kernel panic
is gone.
Change-Id: I30eed747f924cb0029de55d2ab85c5a94075dc1b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/14278
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This used to build, but will not with newer toolchains.
Change-Id: I0f397839eb85977ba18328b0e32040b15a6c3b0f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/14296
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This resolves error messages of the form:
ERROR: device PNP: 002e.6 index 98 has no mask.
Change-Id: I6a368b902d051c8da6f74cbde54f5d12a3e52c2f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14272
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The default nvm_mmio_to_flash_offset() implementation used by NVM code
in intel/common does not work on apollolake. As a result, provide the
correct override.
Change-Id: I01a94f90dfdd33586a4aac5c05dd8c73e8804437
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14248
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On apollolake, the flash is memory-mapped differently, and the default
MMIO to flash calculation does not produce correct results. While the
long-term solution is to rewrite the NVM functionality to keep the
flash offset as part of its context, as a temporary measure, allow
overriding the to_flash_offset() function by declaring it weak.
Change-Id: Ic54baeba2441a08cfe1a47e235747797f6efb59b
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14247
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This reverts commit f961becc43.
On studying the BKDG more closely this is not the correct place
to enable DIMM parity. Further patches to clarify the parity
setup process on Family 15h are forthcoming.
Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebecd
Reviewed-on: https://review.coreboot.org/14271
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The sync flood reset fix in Change-Id: I62d897010a8120aa14b4cb8d096bc4f2edc5f248
and related changes have made it possible to move the sync flood enable statements
back into romstage.
Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebece
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14270
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
When a fatal error and subsequent sync flood / reset occurs,
the MCA status registers may contain valuable information on
the cause of the fatal error. Add functions to report MCEs and
reset the MCA status registers early in the boot process.
Change-Id: Icde1051ac22f93688de1330f5e2c9ce28b14b59a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14265
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The SB700 family has the ability to report the last reset
reason. This is useful in the context of handling MCEs
and recovering from fatal errors / sync floods.
Add a function to retrieve the last reset flags.
Change-Id: I754cb25e47bd9c1e4a29ecb6cb18017d1b7c3dc4
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14263
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Certain AMD platforms, such as those using the SP5100 southbridge,
contain a very poorly documented bug related to LPC ROM access,
which is triggered by repeated (hundreds or more) rapid calls to
get_option(). This bug manifests as a complete system deadlock
in ramstage device configuration, requiring standby power to be
removed from the system to release the deadlock.
Cache the platform ECC status to avoid repeated calls to get_option()
in the lane count detection logic.
Change-Id: I8b48c523218ccc8c113319957d6eca2d15e1070f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14273
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This adds boot mode constants. They match EDK2 found in PiBootMode.h
constants but are part of FSP2.0 spec.
Change-Id: I16ee90ff372d252ddc042ca89c1e5912ab041616
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14249
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Upcoming designs are based on similar SOCs, this patch moves code
which can be reused into a common directory under soc/rockchip.
Changing spi.h to include stdder.h, as this is were check_member() is
defined, this becomes necessary later when the new SOC code is added.
Renaming UART driver private functions not to be bound to any
particular SOC.
BUG=none
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
of the patches applied).
Change-Id: I39a505aecda8849daa58a8eca0e44a5243664423
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f63f2582042ac115481207ddf329ea2e3260e55e
Original-Change-Id: I3a1139305354d460492b25a45f3da315a9a0b49e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/335408
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14235
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Our EDID code had always been aligning the framebuffer's
bytes_per_line (and x_resolution dependent on that) to 64. It turns out
that this is a controller-dependent parameter that seems to only really
be necessary for Intel chipsets, and commit 6911219cc (edid: Add helper
function to calculate bits-per-pixel dependent values) probably actually
broke this for some other controllers by applying the alignment too
widely.
This patch makes it explicitly configurable and depends the default on
ARCH_X86 (which seems to be the simplest and least intrusive way to make
it fit most cases for now... boards where this doesn't apply can still
override it manually by calling edid_set_framebuffer_bits_per_pixel()
again).
Change-Id: I1c565a72826fc5ddfbb1ae4a5db5e9063b761455
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14267
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The logic to enable reset on sync flood per RPR guidelines
somehow ended up guarded on the SATA AHCI setup. Unconditionally
enable reset on sync flood per the RPR.
Change-Id: I62d897010a8120aa14b4cb8d096bc4f2edc5f248
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14260
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
power_on_after_fail=Enable in cmos.default leads to wake on AC behaviour
on mobile systems. Therefore set cmos.default entry to "Disable" in order
to improve user experience.
Change-Id: I977a4e6bc028c8c4c7fc1c2f5fdd74a59e951c60
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/13884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
In error case die in top level function.
No functionality is changed.
Change-Id: Ie15b01184d40bdbce20d49dcab2f9fb607068c7a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14171
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Return errors to top level ram init function.
Required by the folowing series to implement a fallback.
No functionality is changed.
On error case the system still halts in every test.
Change-Id: I6278c4a1d7b4a96be8988a60671fc3d72cd6cb3d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14170
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
SP5100 devices are affected by an erratum that can lock up the
EHCI ports under certain conditions. Add an optional CMOS
option to enable a workaround at the expense of performance.
Change-Id: I305d23dfa50f10a3dcb5c731e8923305c8956dde
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14241
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Change the existing chromeos.fmd files and the dts-to-fmd script to mark
RW_LEGACY as CBFS, so it's properly "formatted".
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4
Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336403
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14240
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The codepath was untested and incomplete. It now determines the right
GBB region sizes and puts the data in.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I2cc47ddd8aa7675375ca5ed5f75632c30c65dd1e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36e026404ed049d61b677ef043a781c8c209dd93
Original-Change-Id: Ib872627740dbd8ac19fc3e2a01464457f38366ed
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336358
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14239
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This mirrors vboot's flag table.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I4473eb6c0e073f555e6a692a447e8cc85f8e4eeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0fc50a6cff5ba900e6407d58a8f18db63b5946a5
Original-Change-Id: Ieabd3f9391ba256557e18386f334558d64a81694
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336630
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14238
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The MT8173 hardware watchdog can assert an external signal which we use
to reset the TPM on Oak. Therefore we do not need to do the same
double-reset dance as on other Chromebooks to ensure that we reset in a
correct state.
Still, we have a situation where we need to reconfigure the watchdog
early in the bootblock in a way that will clear information about the
previous reboot from the status register, and we need that information
later in ramstage to log the right event. Let's reuse the same watchdog
tombstone mechanism from other boards, except that we don't perform a
second reset and the tombstone is simply used to communicate between
bootblock and ramstage within the same boot.
BRANCH=None
BUG=None
TEST=Run 'mem w 0x10007004 0x8' on Oak, observe how it reboots and how
'mosys eventlog list' shows a hardware watchdog reboot event afterwards.
Change-Id: I1ade018eba652af91814fdaec233b9920f2df01f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07af37e11499e86e730f7581862e8f0d67a04218
Original-Change-Id: I0b9c6b83b20d6e1362d650ac2ee49fff45b29767
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334449
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14234
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Changing these thresholds again for new tuning in March of 2016.
Something's changed in the latest firmware to cause all
values previously read on Chell to float down.
Set "nuvoton,sar-threshold" property to thresholds
based on tuning with the Android Wired Headphone
Compatibility Kit and Chell DVT.
Signed-off-by: Benson Leung <bleung@chromium.org>
BUG=chrome-os-partner:49333
BRANCH=none
TEST=Run evtest, selecting the input event for sklnau8825adi
Using the Nominal headphones from the kit, check that the
buttons for "KEY_VOLUMEDOWN", "KEY_VOLUMEUP", "KEY_MEDIA",
and code 582 (?) (should be voice search, but evtest doesn't understand)
All of these buttons should work properly.
Change-Id: Ie5ff1d35599d2cca5ce76467ecd7ec3ecab42d8b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1d13e967addb5cd31e6196e32541cda97ae00257
Original-Change-Id: I11de7a0853a3598f3834e8bae3140b9942cbd0b0
Original-Reviewed-on: https://chromium-review.googlesource.com/334402
Original-Commit-Ready: Benson Leung <bleung@chromium.org>
Original-Tested-by: Benson Leung <bleung@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14233
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
A long time ago many Chrome OS boards had pages full of duplicated
boilerplate code for the fill_lb_gpios() function, and we spent a lot of
time bikeshedding a proper solution that passes a table of lb_gpio
structs which can be concisely written with a static struct initializer
in http://crosreview.com/234648. Unfortunately we never really finished
that patch and in the mean time a different solution using the
fill_lb_gpio() helper got standardized onto most boards.
Still, that solution is not quite as clean and concise as the one we had
already designed, and it also wasn't applied consistently to all recent
boards (causing more boards with bad code to get added afterwards). This
patch switches all boards newer than Link to the better solution and
also adds some nicer debug output for the GPIOs while I'm there.
If more boards need to be converted from fill_lb_gpio() to this model
later (e.g. from a branch), it's quite easy to do with:
s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/
Based on a patch by Furquan Shaikh <furquan@google.com>.
BUG=None
BRANCH=None
TEST=Booted on Oak. Ran abuild -x.
Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14226
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The official spelling of Nuvoton is not all uppercase. Only the first
letter is uppercase. See the footer of the Nuvoton Web site.
Change-Id: I6ccd4194d7be0c89f8b332fcca5feb2420a4de1e
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/5928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of using arch_segment_loaded() implement
platform_segment_loaded() so as not to tangle the notion of
arch and the chipset. Lastly, add a TODO to allow filtering
of the L1D to L2 flush depending on the region loaded.
Change-Id: I52e7cd2ae6e2d95f21bdd2fe1a471a10565309cb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
In order to not muddle arch vs chipset implementations provide
a generic prog_segment_loaded() which calls platform_segment_loaded()
and arch_segment_loaded() in that order. This allows the arch variants
to live in src/arch while the chipset/platform code can implement
their own.
Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14214
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
While rmodule_load() calls arch_segment_loaded() when it's done
loading any pieces of code which further modify it, like changing
parameters within the program itself, need to notify the rest of
the system.
Change-Id: Ia3374b58488120ba6279592a77d7f9c6217f1215
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14213
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Instead of using platform_prog_run() for flushing programs
from L1D to L2 for code coherency purposes use arch_segment_loaded()
instead as that it's primary purpose. The arch_segment_loaded()
is called within the infrastructure at the appropriate places when
loading programs. Therefore use that to perform the L1D flush
instead of when something is just about to run.
Change-Id: Ib0a6be6f676dcf2c946ef5702471af65d89133e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14212
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
In order for the platform code to handle situations where
special actions are required after a piece of code is loaded
use arch_segment_loaded() to signal to the platform code
that the component is fully loaded into memory.
Change-Id: I119cfc9913f15eb4968fe5bf6a56589e2c53f2d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14211
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The flush L1D to L2 operation was only being used when loading
romstage from bootblock. However, when the FSP-M component is
loaded no code coherency actions are taken. I suspect this is
because the FSP-M component is larger than the 24KiB L1D and
the entry point is early in the image. Thus, when loading
the FSP-M component the earlier part of the image is flushed
out to L2 in the process of loading the latter part of the
component. Also, once verstage is introduced the same
code coherency actions need to be taken as well. Therefore,
position the apollolake code to handle all these cases.
Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14210
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The revision mask for all DR-* series processors was incorrectly
set to only include the DR-B revision mask. Include all DR-*
series prcessors in the DR_ALL revision mask.
Change-Id: Iceda96aa6267b24abcbf78d39f4848d2be8053b8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Found-by: Coverity, CID 1229627 (#1 of 1): Logically dead code (DEADCODE)
Reviewed-on: https://review.coreboot.org/14216
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The log shows the following error on systems that use the
native gfx init. The error isn't shown using the VBIOS blob:
GET_VBIOS: aa55 8086 0 3 0
VBIOS not found.
Don't shift the class-code, as it's already shifted by the PCI layer.
Tested-on: x220
Tested-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I69018940dd51966b45774e0576a1380f90716dce
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14188
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The typo is not present anymore in Family 16h (Kabini), so fix it for
the older families (Family 10h, 12h, 14h, 15h, 15h Trinity) too using
the command below.
$ git grep -l ' ne ' src/vendorcode/amd/agesa | xargs sed -i 's/ ne / be /g'
Change-Id: I9cb419251eeec79925f48a5832fac339d40f01d1
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/5543
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Enabling sync flood on DRAM MCE directly after ECC clear can
lead to a system hang with no way to determine the offending
DRAM module. Clear MCEs after ECC setup, but do not enable
sync flood until NB setup in ramstage to allow time for any
MCEs to accumulate in the status registers. Before enabling
sync flood on MCE, determine if any MCEs were logged during
ramstage execution and display them on the serial console.
Also clear the DRAM ECC sync flood bits during DRAM training
and initial ramstage execution.
Change-Id: Ibd93801be2eed06d89c8d306c14aef5558dd5a15
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14192
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The lint-stable-004-style-labels check tries to verify that labels in c
and asm files start at the first column, and don't have whitespace in
front of them.
This fixes the 2 actual violations of the lint check.
Change-Id: Ia11a90d7301e62a116c7a9ef9b4c2bc3f982b308
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14193
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins)
During power on from cold (S5) state, numerous MCEs are generated
before DRAM training starts, e.g. during HT link training. Clear
these MCEs before DRAM training start, and report any MCEs generated
during DRAM training.
Change-Id: I7d047571242e5bd041e4aac22c1ec1d7d26ef0e6
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14191
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
On Family 15h processors, with certain RDIMMs, MCEs are generated
as a normal part of DCT startup / DRAM training. Disable sync
flood on parity or UC data error until ECC has been enabled.
Change-Id: Ife54751ff127ffd59baaad35d3fea14ea01ef505
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14186
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This resolves a long-standing issue with RDIMM control word
configuration failure, likely due to random parity failure.
Change-Id: If8b8dc5b8b99f4c2fe29b3a133b064631e4693be
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14184
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
In order to add a fallback mechanism, move the ram training code
into a new function. This function will be called multiple times
and must return error or success to the calling function.
Change-Id: I5ee1b3a528290d8252d236b9152b81291736958a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14169
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Somehow the missing header file in
https://review.coreboot.org/#/c/14182 did not trigger compilation
errors before. Add the required header file to enable proper
compilation of storm.
Change-Id: I83c8f2b5fc41e38c1385ff405370753e6eba2abc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14185
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This patch would enable PROCHOT feature in skylake. Asserting
PROCHOT line would throttle the GPU/CPU.
BUG=chrome-os-partner:51142
BRANCH=glados
TEST=manually tested on lars. asserting PROCTHOT by EC
reduces FSP in fish-tank from approx 40 to 20. (50 fish setting),
also CPU freq. drops to from 1600000 to 400000
Change-Id: I8fc0c015ea2c26d20bbbfc619f720f231d540feb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1b88b1f183df9c7362d7e58acb0a1fa0b076d56e
Original-Change-Id: Ida8636efc3d8da56ebd3931144d31ab1b88fe806
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331690
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit d091a999c3827179182b62a1274a9b3581f7f006)
Original-Reviewed-on: https://chromium-review.googlesource.com/333073
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14120
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
GPP_E_21_DDPC_CTRLDATA is pulled low by default.
This causes 2.5mW leakage from 3.3S to GND via R877.
So configuring GPP_E21 in native mode.
BUG=chrome-os-partner:50958
BRANCH=glados
TEST=Build and boot. Measure Power at 3P3S(R955).
Change-Id: I2bdcb698d0b0cd3228c2e59653ac3fb3b1a26951
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d01f932cda44b0b44c5494b316aefc43c8b84c52
Original-Change-Id: Ifd13ea4b16108ef98d09891365f0d17831ab5f65
Original-Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332369
Original-Commit-Ready: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14108
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When doing verification of memory init code in verstage vboot
should issue a TPM_Startup(ST_STATE) instead of TPM_Startup(ST_CLEAR)
in order to preserve the flags in TPM_STCLEAR_FLAGS which include
things like physical presence. In doing so we can also skip the rest
of the TPM init work in this function in the S3 resume path.
BUG=chrome-os-partner:50633
BRANCH=glados
TEST=S3 resume on chell and ensure TPM is resumed instead of being
cleared and that 'tpmc getvf|getpf|getf' does not show any difference
in flags between boot and resume.
Change-Id: I7a48eaf7f57d2bc6ebc182178cbe60ceb2ad8863
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f059f39a0f5c2f21e564b9554efacf26a41ad794
Original-Change-Id: I647869202d2f04328764155d3de4cad9edf10ae4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332434
Original-(cherry picked from commit 5fc7792e4104523569140cd84ce313da721ec34b)
Original-Reviewed-on: https://chromium-review.googlesource.com/332542
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
For platforms that do verification of memory init (and have verstage
execute before romstage) FSP should not attempt to re-initialize the
TPM again in romstage as it has already been done.
BUG=chrome-os-partner:50633
BRANCH=glados
TEST=boot and resume on chell and ensure TPM is not re-initialized
Change-Id: Ied6f39dc8dacdbc3d76070b6135de2308196ff53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fefd4d4b3fde4c7fe4b6de304790914b7a2f87d8
Original-Change-Id: I60a2e4e2d73270697218f094527e09d444e6ab56
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Previous-Reviewed-on: https://chromium-review.googlesource.com/332433
Original-(cherry picked from commit 2de1fd57fe1db7960e0bb86c64dccf827fa55742)
Original-Reviewed-on: https://chromium-review.googlesource.com/332299
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14106
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's required to store the dimm_info in ramctr_timing as only ramctr_timing
is written to mrc cache.
Allows to fill SMBIOS type 17 if mrc cache is used.
Change-Id: I7634b05069df307d471938d9854997a018de81b3
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14168
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
DRAM initialization on storm requires ipq blobs to be
loaded from cbfs. vboot_locator first checks cbmem_find to see if cbmem is
initialized and contains selected region info, else it falls back to
vboot work buffer.
Since cbmem_find calls into cbmem_top to identify the location of
cbmem area, board/chipset is expected to return NULL until the backing
store is ready, which in this case until DRAM is initialized in
romstage, return NULL for cbmem_top.
Change-Id: I1880ce61dcfdabaa527d7a6dcc3482dfe5d5fd17
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14182
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Board or chipset needs to ensure that cbmem backing store is ready
when returning the cbmem top address. cbmem infrastructure has no
support for checking the validity of the backing store/address.
E.g.: If romstage handles cbmem coming online, chipset or board need
to ensure that call to cbmem_top in romstage returns NULL if the
backing store is not yet initialized.
Add a comment to ensure that developers know this requirement while
implementing cbmem_top for future chipsets/boards.
Change-Id: I0086b8e528f65190b764a84365cf9bf970b69c3f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14181
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In the board status repository, there is trailing whitespace in the
coreboot log of the board ASUS KFSN4-DRE.
```
SATA S SATA P
```
Remove it, as it’s unnecessary.
Change-Id: I5c505eb7c734dca3fa18235e2bc0bc82b5b50b16
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14175
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Replace open coded memset() functions with calls to the library function.
The new code also explicitly backs up and restores the data structures
that are preserved across calls to mct_ResetDataStruct_D(), and no longer
relies on structure member order to function correctly.
Change-Id: I6dd6377deda0087cd1b65f7555588978657d6516
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
A call to i2c_read() for a non-existent address followed by an i2c_read()
to a valid address results in a false abort status for the 2nd call.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT)
Because the abort status register is cleared on read and wait_tx_fifo()
reads it twice, the returned status does not contain the abort status.
Fixing that changed the 2nd read to reflect the abort status.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT)
Bit 0 indicates that the address was not acknowledged by any slave.
That's the abort status from the previous transaction.
So I added a read of the abort status before starting a transaction in
both i2c_read() and i2c_write().
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS)
Tested on a Bay Trail E3845 SoC.
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14160
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
i2c.c uses "*(volatile unsigned int *)" constructs where it could use
read32() and write32().
Switch to using read32() and write32().
The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed
in https://review.coreboot.org/#/c/14160/
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
(intel/fsp_baytrail: Fix I2C abort logic)
I also fixed a few minor white space issues.
Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14162
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
During maximum read latency training on Family 15h processors,
the maximum read latency was incorrectly set from the NBP1
value instead of the correct NBP0 value.
Modify maximimum read latency training to explicitly operate
on the NBP0 value, and store the previously calculated NBP1
value for reference by other portions of the training algorithm.
Change-Id: I5d4a6c2def83df3e23f1a4c598314c31a0172cd7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14150
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Coreboot and most payloads support three basic pixel widths for the
framebuffer. It assumes 32 by default, but several chipsets need to
override that value with whatever else they're supporting. Our struct
edid contains multiple convenience values that are directly derived from
this (and other properties), so changing the bits per pixel always
requires recalculating all those dependents in the chipset code. This
patch provides a small convenience wrapper that can be used to
consistently update the whole struct edid with a new pixel width
instead, so we no longer need to duplicate those calculations
everywhere.
BUG=None
TEST=Booted Oak in all three pixel widths (which it conveniently all
supports), confirmed that images looked good.
Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14158
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As a follow up to Change-Id: I1fb3fc139e0a813acf9d70f14386a9603c9f9ede,
use as builtin compiler hint instead of inline assembly to allow the
compiler to generate more efficient code.
Change-Id: I690514ac6d8988a6494ad3a77690709d932802b0
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12083
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current Apollolake flow has its code executing out of
cache-as-ram for the pre-DRAM stages. This is different from
past platforms where they were just executing-in-place against
the memory-mapped SPI flash boot media. The implication is
that when cache-as-ram needs to be torn down one needs to be
executing out of DRAM since the act of cache-as-ram going
away means the code disappears out from under the processor.
Therefore load and use the postcar infrastructure to bootstrap
this process for tearing down cache-as-ram and subsequently
loading ramstage.
Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14141
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Certain chipsets don't have a memory-mapped boot media
so their code execution for stages prior to DRAM initialization
is backed by SRAM or cache-as-ram. The postcar stage/phase
handles the cache-as-ram situation where in order to tear down
cache-as-ram one needs to be executing out of a backing
store that isn't transient. By current definition, cache-as-ram
is volatile and tearing it down leads to its contents disappearing.
Therefore provide a shim layer, postcar, that's loaded into
memory and executed which does 2 things:
1. Tears down cache-as-ram with a chipset helper function.
2. Loads and runs ramstage.
Because those 2 things are executed out of ram there's no issue
of the code's backing store while executing the code that
tears down cache-as-ram. The current implementation makes no
assumption regarding cacheability of the DRAM itself. If the
chipset code wishes to cache DRAM for loading of the postcar
stage/phase then it's also up to the chipset to handle any
coherency issues pertaining to cache-as-ram destruction.
Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14140
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds support for an alternative ternary number system in
which group of GPIOs can be interpreted. In this system, the digit
combinations that would form a binary number (i.e. that contain no 'Z'
state) are used to represent the lower values in the way they're used in
the normal binary system, and all the combinations that do contain a 'Z'
are used to represent values above those. We can use this for boards
that originally get strapped with binary board IDs but eventually
require more revisions than that representation allows. We can switch
their code to binary_first base3 and all old revisions with already
produced boards will still get read as the correct numbers.
Credit for the algorithm idea goes to Haran Talmon.
BRANCH=None
BUG=None
TEST=Stubbed out the actual GPIO reading and simulated all combinations
of 4 ternary digits for both number systems.
Change-Id: Ib5127656455f97f890ce2999ba5ac5f58a20cf93
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14116
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order for a caller to utilize an rmodule's parameters section
after calling rmodule_stage_load() export the rmodule's parameter
pointer in struct rmod_stage_load.
Change-Id: I9cd51652cf8cdb3fae773256989851638aa1a60f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14139
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Set MMCONF_BASE_ADDRESS to 0xf8000000.
It was already done for some boards, but not all.
The sandybridge chipset code assumes 64 pci buses behind MMCONF.
Therefore, only 64MiB of physical address space is required.
Increasing the address allows to use additional 128MiB of MMIO
space and to use the Intel IGD and a PEG at the same time.
Previously it wasn't possible to use both at the same time,
as two 256MiB areas won't fit into MMIO space.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
* Onboard GPU Intel IvyBridge Desktop
* PEG GPU AMD RV770
Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14096
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
In Chromium OS downstream this was done together with adding the support
for ATF, but unfortunately ATF upstream isn't ready yet. This commit
is a reminder to enable things once ATF caught up.
Change-Id: Id0d6908d906a1e54cdda4f232d572d996d9c556f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13968
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As the DA9212 and MT6311 external buck can be controlled by hardware
since rev-5 board, we don't need to pass any board specific parameter
to ARM TF.
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I43eebe25ab14d3dd84e8bb4286e2bb55c8c3c063
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c4dfe61c69042e464b384e2e0edbc55eda23a74
Original-Change-Id: I541357fee6afb1ff2d771bcb073f7c9a9db52f00
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332344
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the code which is passing parameters to ARMTF and move external
buck initilizaton from ARMTF to coreboot.
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: I4f4b30acbee9b42a202b326f2fe4517cb4b9d83c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37bec54b4d8a3bce38878e292e4821da3959026a
Original-Change-Id: Ib81709812a064f6daf13c9b4d6525f1858c81393
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332343
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14123
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add secondary PMIC for external buck control on Oak rev0/1/2/5
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: Ia000b0c7d61e8396856656247f9627e33b21b19b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 241508e7d781fac8ee085ee81962043dd654c52d
Original-Change-Id: I6c75e2462363a5523bf1ebb03af7a36740293624
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332342
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add secondary PMIC for external buck control on Oak rev3/4
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: I24c18a1cf71fc57deacedcbeb6a100b131c28077
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7f7f8ceac795d8193194a6918a73c4b391009025
Original-Change-Id: I312d8281d2c09d8bc43f092edef3e405d51ee7d0
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332341
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
i2c_read_field() - read the value from the specific register field
i2c_write_field() - write the value to the specific register field
BRANCH=none
BUG=none
TEST=none
Change-Id: I2098715b4583c1936c93b3ff45ec330910964304
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0817fc76d07491b39c066f1393a6435f0831b50c
Original-Change-Id: I92c187a89d10cfcecf3dfd9291e0bc015459c393
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14105
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Under certain conditions (training abort) BlockRxDqsLock could
remain set in violation of the BKDG. Ensure BlockRxDqsLock is
reset to 0 after a lane training abort.
Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b
Reviewed-on: https://review.coreboot.org/14144
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Disable the ROM shadow and enable RAM for 0x000e0000 - 0x000fffff.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing successful display of 0x000ffff0 - 0x000fffff does not match
the end of the SPI flash.
Change-Id: I6e0a50417815320333eae0b69b96280c39db7eaa
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14110
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable the SPI controllers on the Quark SoC.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Load the SPI driver stack
* Testing is successful when the time is able to be displayed on a
set of seven-segment displays controlled by a Maxim MAX6950 SPI
display controller.
Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14109
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The previous implementation assumed the CPU physical address size to
be 40 which is not true of all platforms. Use an existing function to
obtain the correct CPU physical address to report in the DMAR ACPI
table.
Change-Id: Ia79e9dadecc3f5f6a86ce3789b213222bef482b3
Signed-off-by: Jacob Laska <jlaska91@gmail.com>
Reviewed-on: https://review.coreboot.org/14102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Instead of hard-coding var mtrr numbers in code, use this function to
identify the first available variable mtrr. If no such mtrr is
available, the function will return -1.
Change-Id: I2a1e02cdb45c0ab7e30609641977471eaa2431fd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14115
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
When system enters suspend, SPM will pull SRCVOLTEN low to turn off some
power rails. VSRMCA7 should follow this pin to turn on/off the power.
BRANCH=none
BUG=none
TEST=verified on Oak rev5
Change-Id: I9d81f855a74fe02a59246ce0c6a7f0e162b9fd0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d92fb1029b810028138eb91b064b63a58b82602f
Original-Change-Id: I37ff0694cbd7b17d5a1ae172c463b4e6aae2b99c
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332345
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14103
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to make this work earlymtrr.c needed to be removed
from intel/truxton/romstage.c. It's not a ROMCC board so
there's no reason to be including .c files.
Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14094
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
I see no user of any of this code. Remove it.
Change-Id: I776cd3d9ac6578ecb0fe6d98f15611e4463afb7a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14098
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Intel i3100 northbridge code is the only user of
cache_ramstage(). Therefore, place it next to the sole
consumer.
Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14097
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
make_idb.py only support RK3288 before, add chip parameter, so we can
support RK3399 either.
Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5
Signed-off-by: huang lin <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/13913
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes
IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get
their logic reset over pltrst and hence configuring PADRSTCFG to
PLTRST to prevent IRQ strom after S3 resume.
BRANCH=glados
BUG=chrome-os-partner:50536
TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed
after S3 resume.
Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68
Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329453
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331174
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Sort out some style issues that were identified by Paul.
Change-Id: I9ed946ae613c87234f8c9824eb14b8d28909dfcf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14064
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The two external USB ports and the internal USB header have overcurrent
protection chips with the low-active overcurrent signal connected to the
chipset.
The power-on default for this register disables the software detection
of overcurrent conditions.
After setting the register Linux correctly shows the overcurrent
condition in the kernel log (tested by shorting the 5v and gnd lines on
J14 / the internal USB header):
[ 2015.229921] usb usb1-port3: over-current condition
[ 2015.449925] usb usb1-port4: over-current condition
Simlar for the external ports:
[ 256.237916] usb usb1-port1: over-current condition
[ 256.458084] usb usb1-port5: over-current condition
Note that each signal is shared between two ports:
usboc0#: External ports (port1/5)
usboc1#: Internal ports (port3/4)
Change-Id: I02d498053b8ec61dc206e74a96c4a1dcfd4fae92
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/14084
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix for the T4xx and T5xx series.
It does not apply to X2xx/X6x series as those have only
one GPU, which is always connected to the display.
The T6x series needs special care not handled with this patch.
Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be
deactivated in case a dedicated GPU is found and active,
leaving the system without a working display.
Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14031
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
BRANCH=none
BUG=chrome-os-partner:49229
BUG=chrome-os-partner:50806
TEST=power on to kernel on Oak Rev3 with 4GB dram
Change-Id: I32fa881df12eb9b7f66086904aebde3dd1483fbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275
Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331811
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14089
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
If the system is using 4GB of memory, enable 4GB mode in
the memory controller.
Change-Id: I4d0f8ad8d43ff45dd786f4244b11c0879d2088cd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275
Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331811
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14088
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This pin is not used anymore since Rev5.
BRANCH=none
BUG=chrome-os-partner:49375
TEST=make and boot on Rev4/5
Change-Id: I3c775eb2b5e05256523bfd8be814e516944a2f90
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a87e3babe28413bd879a2d95d4612a5b6b541419
Original-Change-Id: I87972ff8961309ecdad03639e1b6fac1da119cd7
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331810
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14087
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This option is no longer needed, as FMAP support has been
fully integrated in coreboot
Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The Kconfig lint tool is complaining because this symbol doesn't
exist. Create a temporary definition that can be removed when
the chipset is added.
Change-Id: I6a8abffcc91773aae16721ee1f48c4c64bd6b486
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14091
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Initial vendor codes to support Broadwell-DE SoC. This is FSP 1.0 based
project and is based on Broadwell-DE Gold release. Change has been
verified on Intel Camelback Mountain CRB.
Change-Id: I9262c9d70a58f0c7427f0658948adf080f2f6d8f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/14030
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would
result in unusable devices, as the resources were set to 0 and the devices
were disabled.
lpss.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE
and applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode
set to disable and the devicetree set to default.
Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14042
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If the VBT was provided to the FSP GOP driver then graphics init
will be done as part of SiliconInit step and we can mark that
when it is completed.
This will result in the "oprom" flag being set properly in the
coreboot gpio table and the netboot firmware will have video.
[pg: avoided conflict with Quark that comes without
silicon_init_params.GraphicsConfigPtr]
BUG=chrome-os-partner:50864
BRANCH=glados
TEST=boot image.net.bin on chell and get working graphics
without being setuck in a reboot loop thinking graphics needs
to be started when it already has been.
Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331301
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240)
Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5
Original-Reviewed-on: https://chromium-review.googlesource.com/331355
Reviewed-on: https://review.coreboot.org/13986
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a
did not take into account the default UI setting introduced in
change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM
instability and occassional failure to boot.
Use the correct 1UI value for the modified function semantics.
Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14073
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This change properly assigns resources to the LPE (Low Power Engine for
Audio) and enables ACPI mode.
lpe.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and
applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
That wipes out all previously stored settings and breaks running devices
in ACPI mode.
This more closely matches what is done in intel/baytrail.
Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14040
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i3100 boards in the chipset.
Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13786
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i810 boards in the chipset.
Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13784
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i830 boards in the chipset.
Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13783
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
read_dqs_read_data_timing_registers() and
read_read_dqs_timing_control_registers() served essentially
the same function but had slightly different semantics,
causing confusion and needlessly complex Family15h code.
Consolidate both into read_dqs_read_data_timing_registers()
and adjust surrounding code to match new semantics.
Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13994
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Skip logging a wake source when just resetting without coming from
S3 or S5 state. This will prevent the occasional spurious event
like PCI PME from showing up in the event log.
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=run warm reboot teset on chell and ensure no wake source is logged
Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890
Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329846
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331173
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13991
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable SDHCI runtime PM since the display flicker due to
SCC Power Gatingis addressed by 0x82 microcode
BRANCH=glados
BUG=chrome-os-partner:44663
TEST=Check if display flicker is gone when SCC is power-gated
Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba
Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3
Original-Signed-off-by: Medha Garima <medha.garima@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329651
Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Original-Tested-by: Jenny Tc <jenny.tc@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331172
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13990
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In order to save more power by shutting down clocks add the
ability to optionally clock gate the 8254 programmable interrupt
timer. When doing this the platforms lose their "PC"-ness which
certain payloads and OSes rely on such as SeaBIOS.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Enabled option on chell. Noted the bit is set upon booting.
Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477
Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329411
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331171
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13985
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode
has been updated since v76, and it requires an an extra VR mailbox
command should be sent from coreboot to pcode.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
CQ-DEPEND=CL:329393
Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2
Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329480
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13983
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Adding an option to enable VR specific mailbox command.
When set, an extra VR mailbox command specifically for
the MPS IMPV8 VR will be sent.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917
Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329393
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13982
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The previous copy of FspUpdVpd.h was not up to date w.r.t. the
FSP release being used for skylake boards. Fix that.
BUG=chrome-os-partner:50863
BRANCH=None
TEST=Built and booted on chell.
Change-Id: I39896c04d35189b0fb2c903eefda4e5b7c57084a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd647f354b8d9946b2217751cf1af845f29191b7
Original-Change-Id: I4ad131af6c563c9c33eb2b9207b13617ff24385d
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331290
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13984
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
NOR flash has a hardware limitation that it can't access SRAM region
after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000
for NOR flash driver. So that the NOR flash driver can use this region
after 4GB mode is enabled.
BRANCH=none
BUG=chormoe-os-partner:49229
TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram.
And check /proc/meminfo.
Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e
Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327962
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331177
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13989
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect
the DRAM size at runtime.
BUG=chrome-os-partner:49427
BRANCH=none
TEST=Boot to kernel
Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223
Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327961
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331176
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The DRAM size can not be determined before DRAM is initialized. Since
mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of
2GB DRAM address before DRAM is initialized.
BRANCH=none
BUG=none
TEST=boot to kernel
Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a
Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327960
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331175
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13987
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Runs the LITTLE core at highest freqency to speed up the boot time.
Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward
compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.)
BRANCH=none
BUG=chrome-os-partner:47422
TEST=flash the bootloader and measure the boottime by cbmem result
Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161
Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324685
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13980
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot oak to kernel on rev2
Change-Id: I368fcac1cf5e2261d00a34882a7341733ebd0732
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ea0407f7273bc88613bc23a6fc4c41f9cca1adb
Original-Change-Id: Ic422e7265fdd35c573d8cd44280a1f7dc163a6db
Original-Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/323932
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add multi-bytes read support.
BRANCH=none
BUG=none
TEST=saw edid log and dev screen
Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306
Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/325211
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13978
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reset pin of USB Hub is connected to GPIO118, it is low active.
Config GPIO118 as GPO and output high.
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df
Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd
Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321054
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Oak introduces a 1.8V to 3.3V level shifter for EC SPI bus after rev5.
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I71868b003fc71dee0532033299afc155a9fbec9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 030b478fedf046a7b818696779299c591415fcbd
Original-Change-Id: Ibff9705832700867279cb1b39b752b8f5f27cf33
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320026
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13970
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=build pass and boot to oak kernel
Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9
Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9
Original-Signed-off-by: jun.gao <jun.gao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319031
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot to shell on Rev3
Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56
Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303207
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13104
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We define a mechanism to pass board specific parameters to BL31. The
idea is BL31 doesn't need to have the board revision knowledge, it
only needs to process the board specific parameters to initialize and
control specific hardware. In this way, we can support different boards
with same BL31 binary.
BRANCH=none
BUG=none
TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got
different board arguments in ARM TF
Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace
Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292678
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We define a mechanism to pass board specific parameters to BL31. The
idea is BL31 doesn't need to have the board revision knowledge, it
only needs to process the board specific parameters to initialize and
control specific hardware. In this way, we can support different boards
with same BL31 binary.
[pg: add the code, but don't actually enable the support yet, because it
relies on code that still needs to be merged to arm-trusted-firmware.]
BRANCH=none
BUG=none
TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got
different board arguments in ARM TF
Change-Id: I9ea3ce6c8f79dd427be67f30bc940d2038173b81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace
Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292678
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13100
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=build pass and boot to oak kernel
Change-Id: I8aa9ca0fce804cc1682947b7e184781dd5d437f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9
Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9
Original-Signed-off-by: jun.gao <jun.gao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319031
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I3ed8bad1bdc7d17e334e0136f92a51c8e7ba4e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e
Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6
Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292692
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13106
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I6b05898de2d0022e0de7b18f1db3c3e9c06d8135
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e
Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6
Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292692
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13105
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot to shell on Rev3
Change-Id: I77c5a8aa31ab10d82115a60bdfee1da35707619f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56
Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303207
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13103
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot oak to kernel on rev1
Change-Id: I0773c81398df445aec16bcfcd0c5a8fe5a588b5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae15c42c2f7d9c2a716e5b6098d85e17279f5eae
Original-Change-Id: I65abf810d35ae5e7156cf6f5730117e690183d18
Original-Signed-off-by: mtk05962 <bayi.cheng@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292693
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The sourcecode is 99% the same. Only two lines differ, but not
in functionality.
Also rename mrccache.c -> mrc_cache.c
Tested-on: boot + suspend/resume on x220
Change-Id: I36f79d066336f223b608c70c847ea6ea6e4ad287
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14007
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The mrc_cache definition and the struct mrc_container are the same
over all intel platforms.
Change-Id: I128a4b5693d27ead709325c597ffe68a0cc78bab
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/13998
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The SST25VF064C doesn't support the auto incrementing write which
all other supported SST chips support. Allow the chips to select
their write method.
Change-Id: Ic088d35461a625469ee6973d1267d7dd11963496
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14000
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The existing MCT code proceeded to the next DRAM training phase if
the minimum lane quality standard passed for either the read or
write direction. Ensure that both pass for a given set of delay
values before proceeding to the next training phase.
Change-Id: I2316ca639f58a23cf64bea56290e9422e02edf1c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13993
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The AMD Family 15h BKDG rev. 3.14 indicates that the maximum read latency
must be calculated prior to DQS position training, however the read
latency calculations use read DQS delay values that have not been
set prior to DQS position training.
Set the read DQS delay values to 1UI (i.e worst case) before calculating
the read latency prior to DQS position training.
Change-Id: I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13995
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
A couple of arrays were not properly initialized. This
did not appear to affect operation of the codebase however
it led to some ugly values being displayed when debugging
was turned on.
Also bounds check an array index; as before this did not
appear to affect operation but was a potential point of
failure.
Change-Id: I243b7197a74aed78ddca808eb3b0f35f1fe9d95a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13934
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of having to supply CAR memory region during compilation
time it is possible to determine it in runtime. FSP2.0 blobs carry
a copy of UPD structure pre-populated with 'default' values. The
default value for StackSize is actually the real value blob needs.
Change-Id: I298e07bb12470ce659f63846ab096189138e594f
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14001
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Different DIMM modules give different SMBIOS type 17 lengths, so we
can't use `meminfo->dimm_cnt*len' for entry struct size, otherwise
it'll give a wrong SMBIOS size when two or more different DIMMs are
installed on the machine.
Change-Id: I0e33853f6aa4b30da547eb433839a397d451a8cf
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/14008
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Instead of just defaulting to disabled, remove the option for
x86 since it doesn't work there.
Change-Id: I2b84b9f866f9231943e573b873c970f420c7c9a5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14017
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Change 13363 (555d6c2) introduced a bug where cbmem_add_bootmem() was
converted to use a new function. Unfortunately instead of passing a
pointer, NULL was passed due to type confusion. This change fixes that
problem by passing address of stack variable instead of NULL.
Change-Id: Ib8e1add3547cda01f71bf1dea14d3e58bdd99730
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14033
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Commit 71512b2c (northbridge/i945/gma: fix build error with native graphics init)
unintentionally changed the code to ignore the NVRAM setting
`tft_brightness`. Revert that hunk to restore the original behavior.
Change-Id: Iffdfc5272732bad3476f35ddac1f5a7564270531
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14002
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This adds most important MMIO reserved memory resources,
real DRAM memory resources, and some DRAM resources that
can not be used as RAM for whatever reason.
Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
UART bar gets overwritten during resource allocation stage. As result
the serial driver ends up using stale BAR so serial output does not
work. This driver simply tells resource allocator not to change BAR
of UART device.
Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This is the minimal setup needed to get all CPU cores enabled. That
includes sending an IPI to APs and setting up MTRRs. Microcode updates
are not performed for two reasons:
* CSE (Converged Security Engine) upgrades the microcode before
releasing reset
* Microcode update files are not available at this point in time
Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13910
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
On platforms that didn't use 32-bit addresses, enabling the
CONFIG_TRACE option (Trace function calls) would break the build due
to a cast from a pointer of a different size.
This fixes this warning:
src/lib/trace.c:29:58: error: cast from pointer to integer of different
size [-Werror=pointer-to-int-cast]
Change-Id: Iaab13c1891b6af7559ea6982ecc6e74c09dd0395
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13962
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Use UDELAY_IO selected by CPU_VIA_C7, so no manual inclusion
(or secondary UDELAY implementation) is needed
Change-Id: Ib086a1bfe8ffca5757bf553c5a62a45da7a410b6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13782
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i440BX boards in the chipset.
Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13781
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a port of Auron_Paine based on upstream Auron and the Auron_Paine
code originally from commit bd61dfd in Google branch
firmware-paine-6301.58.B .
Change-Id: I3a1faec3195a81bb3a6496b8bd610fc8a89e66aa
Signed-off-by: Georg Wicherski <gwicherski@gmail.com>
Reviewed-on: https://review.coreboot.org/11907
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Pass memory training information to MemoryInit, so memory
training can be completed.
Change-Id: Icb1bf308b77a1c8481313c259c3f3dd1d8379863
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13870
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to
statically allocate the different memory regions it needs and guarantees
at build time that there are no dangerous overlaps between them. At the
end of its (ramstage) execution, however, it usually loads a payload
(and possibly other platform-specific components) that is not integrated
into the coreboot build system and therefore cannot provide the same
overlap guarantees through memlayout.ld. This creates a dangerous memory
hazard where a new component could be loaded over memory areas that are
still in use by the code-loading ramstage and lead to arbitrary memory
corruption bugs.
This patch fills this gap in our build-time correctness guarantees by
adding the necessary checks as a new intermediate Makefile target on
route to assembling the final image. It will parse the memory footprint
information of the payload (and other platform-specific post-ramstage
components) from CBFS and compare it to a list of memory areas known to
be still in use during late ramstage, generating a build failure in case
of a possible hazard.
BUG=chrome-os-partner:48008
TEST=Built Oak while moving critical regions in the way of BL31 or the
payload, observing the desired build-time errors. Built Nyan, Jerry and
Falco without issues for good measure.
Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is a step towards isolating the timer drivers.
Change-Id: I4c9349054be0cf520cd4407be9fb393b664223a4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13922
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
There's no need to use a struct resource type for
fsp_find_reserved_memory(). struct resource is mainly associated
with a device and that memory is added to cbmem after memory init.
Other uses ins FSP 2.0 just use struct range_entry. Use that
instead for consistency.
Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13960
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The FSP 2.0 implementation doesn't handle FSP modules for
SoCs that are required to be XIP. There is no notion of
"loading" in that situation where one should be copying
anything anywhere.
Additionally, the loading code does not handle overlaps within
the current running program which is doing the loading.
Change-Id: Ide145581f1dd84efb73a28ae51b3313183fa127a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13959
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The memory provided to MemoryInit() for its own usage is at the
top of the CAR region.
Change-Id: I8685b5ab138182e24123b14cac6f7b32e5e784d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13957
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
In order to enforce the semantics of struct range_entry provide
an init function, range_entry_init(), which performs the field
initialization to adhere to the internal struture's assumptions.
Change-Id: I24b9296e5bcf4775974c9a8d6326717608190215
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13956
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
For all the chipsets which were performing the following sequence:
x86_setup_fixed_mtrrs();
x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2);
Replace that with x86_setup_mtrrs_with_detect() since it is equivalent.
Change-Id: I9f362dbf38942d675f615d22b9e5770ce65e5a08
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13936
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Nyan is an old board that was committed before several core code
modernizations to timestamp and CBFS code. Not all of those later
patches were correctly integrated with old boards like this, and the
core code has evolved to a point where it doesn't actually boot anymore.
This patch fixes that issue and brings the Nyan boards more in line with
how later ARM platforms look.
BRANCH=None
BUG=None
TEST=My Blaze boots again.
Change-Id: I3277a2f59ad8ed47063f7f6b556685313b1446f8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a1679e342a7adc2b2371b6e3f69a898a7a5c717
Original-Change-Id: I2a0a2abbd79b4b5f756125dcbb6cbd9441016d4e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328543
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13832
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Include the code to add the WRDD method to the existing
WiFi Device in the mainboard ACPI code.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Compile for the other platforms that are modified.
Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516
Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329296
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13840
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a country identifier field to NVS and populate it with the
call to wifi_regulatory_domain() which will (by default) do a
lookup for the 'region' identifier in VPD on a Chrome OS device.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: Ie7531848e620095732772c22156a85b7f8a6df5c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: dafdb3760a0302e3effdc0e83977c1bfd5c9d3b2
Original-Change-Id: Ic83ab008045a469d0e0756f7e4d42f1b3894c529
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13839
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add an ACPI file containing a generic WRDD method that is used
by Intel wireless kernel drivers to determine the country code
to be used for regulatory domain configuration of the wireless
radios.
This requires an NVS variable called 'CID1' to provide an
ISO-3166-2 alpha-2 country code or it will just return 0 instead.
This is implemented as a bare method because this needs to be
included directly into the wifi device that is defined by the
mainboard as it may have board-specific settings like _PRW that
need to be provided as well.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Change-Id: I27a5e27f65d05ff62a0e79a87a32c1ef0c5d0ef3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 2da0cf76ca3cc5e3dfbc4a0859733523de780cf5
Original-Change-Id: I9d83c3938cceafc77ef8747a5c47f586ee84437e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329294
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In ChromeOS VPD spec the right name is "region".
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/322851
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: mukesh agrawal <quiche@chromium.org>
(cherry picked from commit 21ea0663e7f3ffe3aaea6b6ce0e1216fcd9ca23e)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I4ba9a9c65af3732fa263030640495ab5bea91d1f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 848f18e731eb11dd3037d12607d7364f95e64e34
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: Ib96036f9cd76449f170af5c3dd6ef6e8e91ded94
Original-Reviewed-on: https://chromium-review.googlesource.com/329293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Platforms that need to initialize WRDD package with the regulatory domain
information should implement function wifi_regulatory_domain.
A weak implementation is provided here.
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/314384
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Tested-by: Hannah Williams <hannah.williams@intel.com>
(cherry picked from commit c25d7221679d1fab830d614eeabfa3436bce6ac1)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I1cbdf4e940b009c74ee8ed8f4fca85f4f5c943b2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 27bba336e620a2d3d331e350d4f46164e337fabc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: I84e2acd748856437b40bbf997bf23f158c711712
Original-Reviewed-on: https://chromium-review.googlesource.com/329291
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Set the UPD values for MemoryInit.
* Update the FspUpdVpd.h file which specifies the parameters for
MemoryInit.
* Add the necessary values to chip.h to enable values to come from
the mainboard's devicetree.cb file
* Add the parameters to the mainboard's devicetree.cb file
* Locate the platform configuration database file (pdat.bin)
* Copy the data values from the chip_info structure into the UPDs
* Display the UPD values
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful when the UPD data is displayed before the call to
MemoryInit
Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13896
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
On Apollolake CPU memory mapping is similar to previous SoC, and
we place CBMEM right under TSEG.
Change-Id: I606f690449ba98af6e9fc3074d677c7287892164
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13883
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
UDELAY_IO is defined in src/cpu/x86/Kconfig, so it does
not need to be redefined in the AMD cpu or board Kconfigs.
Change-Id: I6676881c0ba5d1634230fc3d3c37da3afbc6fceb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13780
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current MTRR API doesn't allow one to detect variable MTRRs
along with handling fixed MTRRs in one function call. Therefore,
add x86_setup_mtrrs_with_detect() to perform the same actions
as x86_setup_mtrrs() but always do the dynamic detection.
Change-Id: I443909691afa28ce11882e2beab12e836e5bcb3d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13935
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Add the routines to handle the UPDs for SiliconInit. Currently no
support is required.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful if coreboot calls SiliconInit
Change-Id: I5176ab4b1ea7681c3095f102a86f4b614366c0fc
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13897
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This romstage is minimalistic. Its goal is to set up some BARs
that FSP expects to be set and then invoke FSP driver to train
memory.
Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On Apollo Lake SPI flash is memory mapped. The mapping is different
to previous platforms. Only "BIOS" region is mapped in contrast to
whole flash. Also, the 128 KiB right below 4 GiB are being decoded by
readonly SRAM. Fail accesses to those regions, rather than returning
false data.
Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13706
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds a few helper functions that are intended to assist setting
up framebuffer.
Change-Id: Id8ed4de1f9de32e9222b0120c15a6d33676346e7
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP creates hand-off-blocks (HOBs) to exchange information with
coreboot. This adds a set of utilities to parse HOBs and extract
some useful information from them.
Change-Id: If55dbfaa021cd68c312813a5532a36c68806dbbc
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13801
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds Notify Phase API. This is an important call that is used
to inform FSP runtimes of different stages of SoC initializations
by the coreboot.
Change-Id: Icec770d0c1c4d239adb2ef342bf6cc9c35666e4d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13800
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds SiliconInit API that is needed to be called after memory
has been trained. This call is needed to let the blob do various
initialisations of IP blocks.
Change-Id: I35e02f22174c8392e55ac869265a19c4309932e5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13799
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds implementation of fsp_memory_init() that is used to train
memory.
Change-Id: I72268aaa91eea7e4d4f072d70a47871d74c2b979
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13798
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove dependency on early_serial.c and instead use the
Super I/O's header to access the functions needed.
Also re-organize some of the superio code in order
to succesfully compile the rom.
Change-Id: I85a6f1352ae3b91c3c98e4d3fa0b90b87e02babc
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13925
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs.
The 10K and 40K values map to 'reserved'.
This brings the code closer to the non-FSP baytrail.
Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13907
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Split out the MTRR support into a new module: mtrr.c.
TEST=Build and run on Galileo
Change-Id: Ib9ec479d171dbbc062509e14fbe246f6d90e903a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13895
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Turn on the SD controller to allow it to claim resources.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when at the UEFI shell prompt:
* After issuing:
* "connect -r"
* "map -r"
* The "dir" command displays the contents of the SD flash card
* The "drivers" command shows an SD host and SD media connection
Change-Id: I883dc87270045786ddb931bea83fc36646a128e6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13894
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the TPM code isn't getting built in, the Kconfig symbol
CONFIG_TPM_TIS_BASE_ADDRESS doesn't exist. This ends up creating
an invalid operating region in the ACPI tables, causing a bluescreen
in windows.
This should fix this issue:
https://ticket.coreboot.org/issues/35
"commit 85a255fb (acpi/tpm: Gracefully handle missing TPM module)
breaks Windows"
Change-Id: I32e0e09c1f61551a40f4842168f556d5e1940d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a few assembly lines that are generic enough to be shared
between romstage and verstage that are ran in CAR. The GDT reload
is bypassed and the stack is reloaded with the CAR stack defined
in car.ld. The entry point for all those stages is car_stage_entry().
Change-Id: Ie7ef6a02f62627f29a109126d08c68176075bd67
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13861
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Attempt to better document the symbol usage in car.ld for
cache-as-ram usage. Additionally, add _car_region_[start|end]
that completely covers the entire cache-as-ram region. The
_car_data_[start|end] symbols were renamed to
_car_relocatable_data_[start|end] in the hopes of making it
clearer that objects within there move. Lastly, all these
symbols were added to arch/symbols.h.
Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13804
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove dependency on early_serial.c and instead use the
Super I/O's header to access the functions needed.
Change-Id: I9edf7fc2501aa832106dda9213e702dbcc1200b4
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13887
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
The PLL multiplier value is off by one for DDR3-1866 due to a
wrong TCK value, resulting in DDR3-1600 being used by the PLL.
Needs test on real hardware !
Change-Id: I657b813889945f0d9990dd11680a3d3a25b53467
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Sandy and Ivy Bridge processors use the same socket, and a mainboard
with the socket can support both types of CPUs. However, they use
different native graphics init code for LVDS and cause a crash if
running the wrong code.
This change detects the CPU type and then selects the right code to
run. It will add some more code in ramstage. It also merges the
{SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS.
Tested on a Lenovo T520 with i7-2630qm and i7-3720qm
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91
Reviewed-on: https://review.coreboot.org/12087
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
__asm__ is more robust to compilation flags.
Change-Id: Ic7ca6e38ddd439dcfc4a62ef272ecea62416b4be
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13905
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Those options have no effect or lead to compile error on ARM due
to fundamental incompatibilities. Add proper "depends on" clauses
to hide them.
Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13904
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of keeping track of all the combinations of entry points
depending on the stage and other options just use _start. That way,
there's no need to update the arch/header.ld for complicated cases
as _start is always the entry point for a stage.
Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13882
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
In order to align the entry points for the various stages
on x86 to _start one needs to rename the reset_vector symbol.
The section is the same; it's just a symbol change.
Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13881
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Until recently x86 romstage used to be linked at some default
address. The address itself is not meaningful because the code
was normally relocated at address calculated during insertion
in CBFS. Since some newer SoC run romstage at CAR it became
useful to link romstage code at some address in CAR and avoid
relocation during build/run time altogether.
Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13860
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to avoid collisions with other _start symbols while
grepping and future ones be explicit about which _start this
one is: the 16-bit one only used by the reset vector in the
bootblock.
Change-Id: I6d7580596c0e6602a87fb158633ce9d45910cec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13880
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
It's helpful to see the reset vector in objdump output. Without
it being marked executable it doesn't get displayed.
Change-Id: I85cb72ea0727d3f3c2186ae20b9c5cfe5d23aeed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13879
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Patrick Rudolph