Since cbmem is not initialized in bootblock, CAR_GLOBAL variables
can only be accessed directly similar to verstage.
Change-Id: Ifc705016290807c49dc8c49b581864cac2ad3f80
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13641
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Some platforms may want to use C code in bootblock so they need
writable memory and CAR can be used for it. This change reserves
memory in CAR that can be used by bootblock and other CAR stages.
Change-Id: I8dec768cf8763dbe235f0ba1339079ebc49cbd9a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The PSTATE mask bits for Debug exceptions, external Aborts, Interrupts
and Fast interrupts are usually best left unset: under normal
circumstances none of those exceptions should occur in firmware, and if
they do it's better to get a crash close to the code that caused it
(rather than much later when the kernel first unmasks them). For this
reason arm64_cpu_init unmasks them right after boot. However, the EL2
payload was still running with all mask bits set, which this patch
fixes.
BL31, on the other hand, explicitly wants to be entered with all masks
set (see calling convention in docs/firmware-design.md), which we had
previously not been doing. It doesn't seem to make a difference at the
moment, but since it's explicitly specified we should probably comply.
BRANCH=None
BUG=None
TEST=Booted Oak, confirmed with raw_read_daif() in payload that mask
bits are now cleared.
Change-Id: I04406da4c435ae7d44e2592c41f9807934bbc802
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ba55bc23fbde962d91c87dc0f982437572a69a8
Original-Change-Id: Ic5fbdd4e1cd7933c8b0c7c5fe72eac2022c9553c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325056
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13596
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On ARM64, the memory type for accessing page table descriptors during
address translation is governed by the Translation Control Register
(TCR). When the MMU code accesses the same descriptors to change page
mappings, it uses the standard memory type rules (defined by the page
table descriptor for the page that contains that table, or 'device' if
the MMU is off).
Accessing the same memory with different memory types can lead to all
kinds of fun and hard to debug effects. In particular, if the TCR says
"cacheable" and the page tables say "uncacheable", page table walks will
pull stale entries into the cache and later mmu_config_range() calls
will write directly to memory, bypassing those cache lines. This means
the translations will not get updated even after a TLB flush, and later
cache flushes/evictions may write the stale entries back to memory.
Since page table configuration is currently always done from SoC code,
we can't generally ensure that the TTB is always mapped as cacheable.
We can however save developers of future SoCs a lot of headaches and
time by spot checking the attributes when the MMU gets enabled, as this
patch does.
BRANCH=None
BUG=None
TEST=Booted Oak. Manually tested get_pte() with a few addresses.
Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d
Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323862
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of instructing users to edit xcompile when they want to build
a quark platform, give the build a way to set -march=586 so that
the quark code will build correctly. The Quark processor does not
support the instructions introduced with the Pentium 6 architecture.
Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13552
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Some newer x86 systems can boot from non-memory-mapped boot media
(e.g. EMMC). The bootblock may be backed by small amounts of SRAM, or
other memory, similar to how most ARM chipsets work. In such cases, we
may not have enough code space for romstage very early on. This means
that CAR setup and early boot media (e.g. SPI, EMMC) drivers need to
be implemented within the limited amount memory of storage available.
Since the reset vector has to be contained in this early code memory,
the bootblock is the best place to implement loading of other stages.
Implement a bootblock which does the minimal initialization, up to,
and including switch to protected mode. This then transfers control
to platform-specific code. No stack is needed, and control is
transferred via a "jmp" such that no stack operations are involved.
Change-Id: I009b42b9a707cf11a74493bd4d8c189dc09b8ace
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/13485
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
bootblock.S was used strictly for setting up the system so that the
assembly generated by ROMCC could be executed. Since the
infrastructure now exists to run a bootblock wihtout ROMCC, rename
this file accordingly. this is done to prevent any future confusion.
Change-Id: Icbf5804b66b9517f9ceb352bed86978dcf92228f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/11784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If coreboot's build process is reproducible (eg. using the latest git
timestamp as source), bl31 is, too.
This requires an arm-trusted-firmware side merge first (in progress) and
an update of our reference commit for the submodule, but it also doesn't
hurt anything because it merely sets a variable that currently goes
unused.
Change-Id: If139538a2fab5b3a70c67f4625aa2596532308f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13497
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Instead of tagging object files with .<class>, move them to a <class>
directory below $(obj)/. This way we can keep a 1:1 mapping between
source- and object-file names.
The 1:1 mapping is a prerequisite for Ada, where the compiler refuses
any other object-file name.
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13181
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
There were several spots in the tree where the path to a per class
object file was hardcoded. To make use of the src-to-obj macro for
this, it had to be moved before the inclusion of subdirs. Which is
fine, as it doesn't have dependencies beside $(obj).
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's unused, so get rid of it.
Change-Id: I28c6dc0208686edc3aabaf624773ea70350c1c8f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13177
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For the coreboot license header, we want to use two paragraphs.
See the section 'Common License Header' in the coreboot wiki
for more details.
Change-Id: I4a43f3573364a17b5d7f63b1f83b8ae424981b18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13118
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It ended up in .data, and that doesn't seem to be actually necessary.
Change-Id: Ib17d6f9870379d1b7ad7bbd3f16a0839b28f72c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13134
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
When C_ENVIRONMENT_BOOTBLOCK is selected link bootblock using the
memlayout.ld scripts and infrastructure. This allows bootblock on
x86 to utilize all the other coreboot infrastructure without
relying romcc.
Change-Id: Ie3e077d553360853bf33f30cf8a347ba1df1e389
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13069
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Replace with the more familiar AT&T syntax.
Tested by sha1sum(1)ing the object files, and checking the objdump that
the code in question was actually compiled.
Change-Id: Ie85b8ee5dad1794864c18683427e32f055745221
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13132
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add more code to verstage
[pg: split downstream commit into multiple commits]
Change-Id: I578a69a1e43aad8c90c3914efd09d556920f728e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This provides symbols needed by CBFS and FMAP APIs, and allows running
run_romstage() in an x86 bootblock. Note that console-related files
are not added in this patch, as they are not essential for the
functinality on an x86 environment bootbock.
Change-Id: I36558b672a926ab22bc9018cd51aee32213792c2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12880
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of depending BOOTBLOCK_CONSOLE on a set of architectures,
allow the arch or platform to specify whether it can provide a C
environment. This simplifies the selection logic.
Change-Id: Ia3e41796d9aea197cee0a073acce63761823c3aa
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12871
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This header is only used for the bootblock compiled with ROMCC. As the
follow-on patches introduce a bootblock which does not make use of
ROMCC, rename this header to prevent confusion.
Change-Id: Id29c5bc6928c11cc7cb922fcfac71e5a3dcd113c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12867
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Trivial fix for syntax highlighting in editors. Some get confused by
the double quote that doesn't have a close quote and stop highlighting
at that point. This comment closes the quote and the paren pair so
that they can recover.
Change-Id: I2bdb7c953a86905fc302d77eb9ad1200958800b7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13017
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This just updates existing guard name comments on the header files
to match the actual #define name.
As a side effect, if there was no newline at the end of these files,
one was added.
Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Most of these files are original to coreboot and get the standard
coreboot GPL header.
encoding.h and atomic.h are from the riscv codebase and have their
license.
Change-Id: I32506b0ecf88be2f5794dc1e312a6cd9b2a271ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12906
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This was breaking the build on OS X, but also wasn't working correctly
under linux anymore either. It wouldn't print the illegal symbols
when it failed.
- Split the generation of the offenders file from the actual check for
offending symbols and just send all output to /dev/null.
- Rewrite the check for offending symbols in a way that works with OS X.
Tested by adding a global variable to romstage and verifying the
failure is shown correctly. Verified that it works correctly with no
illegal variables.
Change-Id: I5b3ac32448851884d78c3b3449508ffe014119ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13018
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These were mostly written as part of the coreboot project, so get
the standard coreboot license header.
memmove.c came from the linux kernel, so also gets the standard
coreboot v2 license header, but gets the added attribution that it
was derived from the linux kernel. Unlike many coreboot files,
this file may not be re-licensed as GPL V3.
Change-Id: I1fdc26b543e059f7a42d4b886f7222f4c74b959d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12916
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These were all written as part of the coreboot project, so get
the standard coreboot license header.
Change-Id: I51e1e504b3bc7be2a00c9356d8775b87f2a1db5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12912
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These were all written as part of the coreboot project, so get
the standard coreboot license header.
Change-Id: I4fccc8055755816be64e9e1a185f1e6fcb2b89ae
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These were all written as part of the coreboot project, so get
the standard coreboot license header.
Change-Id: I74438e8032c84f4190ef49f306969f7157234001
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12910
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When microcode updates are enabled, this fixes an issue identical
to that described in GIT hash 7b22d84d:
* drivers/pc80: Add optional spinlock for nvram CBFS access
Change-Id: Ib7e8cb171f44833167053ca98a85cca23021dfba
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12063
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This reverts commit 65e33c08a9.
This was the wrong logic to fix the master header.
Change-Id: I4688034831f09ac69abfd0660c76112deabd62ec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12824
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
When used with a U-boot payload it will need this region
identity mapped also, so we're defining it in preparation
for that functionality.
Change-Id: I27cee5b58cb899433b52bd06df07b5f2105212af
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12768
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Since the introduction of the new (interim?) master header, coreboot
searches the whole ROM for CBFS entries. Fix that by aligning it on top
of the ROM.
Change-Id: I080cd4b746169a36462a49baff5e114b1f6f224a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/12810
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
In order for a U-boot payload to work properly the soc_registers
region (device registers) needs to be mapped as uncached.
Therefore, add a coherency argument to the identity mapping funcion
which will establish the type of mapping.
Change-Id: I26fc546378acda4f4f8f4757fbc0adb03ac7db9f
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12769
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When enabling the IOMMU on certain systems dmesg is spammed with I/O page faults like the following:
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.0 domain=0x000a address=0x000000fdf9103300 flags=0x0030]
Decoding the faulting address:
0x000000fdf9103300
fdf91x Hypertransport system management region
33 SysMgtCmd (System Management Command) = 0x33
3 Base Command Type = 0x3: STPCLK (Stop Clock request)
3 SMAF (System Management Action Field) = [3:1] = 0x1
1 Signal State Bit Map = [0] = 0x1
Therefore, the error appears to be triggered by an upstream C1E request.
This was eventually traced to concurrent access to the SP5100's SPI Flash controller by
multiple APs during startup. Calls to the nvram read functions get_option and read_option
call CBFS functions, which in turn make near-simultaneous requests to the SPI Flash
controller, thus placing the SP5100 in an invalid state. This limitation is not documented
in any public AMD errata, and was only discovered through considerable debugging effort.
Change-Id: I4e61b1ab767b1b7958ac7c1cf20eee41d2261bef
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12061
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Section 6.1.3 (Text Strings) of the SMBIOS specification states:
If a string field references no string, a null (0) is placed in that
string field.
Change smbios_add_string() to do that.
Change-Id: I9c28cb89dcfe2c8ef2366c23ee6203e15b7c2513
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12697
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
$(objgenerated)/empty would touch files before the directory
is created on parallel builds.
Thanks to reproducible-builds.org for hitting this bug.
Change-Id: I7565e9fe130b4e9deaf1c7b9d568ff90b00dda52
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/12717
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The ALIGN_CURRENT macro relied on a local variable name
as well as being defined in numerous compilation units.
Replace those instances with an acpi_align_current()
inline function.
Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12707
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This paves the way for AP printk spinlock on AMD platforms
Change-Id: Ice42a0d3177736bf6e1bc601092e413601866f20
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/11958
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Now that only CBFS access is supported for finding resources
within the boot media the assets infrastructure can be removed.
Remove it.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In coreboot, bool, hex, and int type symbols are ALWAYS defined.
Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12560
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Move initialization of entry to later in main.
- Make boot_mode an unsigned char - no need to use int.
- Remove unnecessary variable filenames.
- Only get and try to boot fallback once.
Change-Id: I823092c60dd8c2de0a36ec7fdbba3e68f6b7567a
Test: compiled.
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12574
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We need mmu interfaces in these two stages for,
1. bootblock: to support mmu initialization in bootblock
2. romstage: to be able to add dram range to mmu table
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I56dea5f958a48b875579f546ba17a5dd6eaf159c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf72736bda2233f8e0bdd7a8ca3245f1d941ee86
Original-Change-Id: I1e27c0a0a878f7bc0ff8712bee640ec3fd8dbb8b
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292665
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12585
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
verstage, romstage, and payload can be added through infrastructure now.
Change-Id: Ib9e612ae35fb8c0230175f5b8bca1b129f366f4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We currently race in SMM init on Atom 230 (and potentially
other CPUs). At least on the 230, this leads to a hang on
RSM, likely because both hyperthreads mess around with
SMBASE and other SMM state variables in parallel without
coordination. The same behaviour occurs with Atom D5xx.
Change it so first APs are spun up and sent to sleep, then
BSP initializes SMM, then every CPU, one after another.
Only do this when SERIALIZE_SMM_INITIALIZATION is set.
Set the flag for Atom CPUs.
Change-Id: I1ae864e37546298ea222e81349c27cf774ed251f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/6311
Tested-by: build bot (Jenkins)
Tested-by: BSI firmware lab <coreboot-labor@bsi.bund.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of having to remember to strip the quotes everywhere so that
string comparisons (of which there are a few) match up, do it right at
the beginning.
Fixes building the image with a .config where CONFIG_CBFS_PREFIX
contains quotes.
Change-Id: I4d63341cd9f0bc5e313883ef7b5ca6486190c124
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12578
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Instead of having to have an ifeq() all across the code base,
use $(target-objcopy). And correct target-objcopy to a value
that objcopy actually understands.
Change-Id: Id5dea6420bee02a044dc488b5086d109e806d605
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch removes the old arm64/stage_entry.S code that was too
specific to the Tegra SoC boot flow, and replaces it with code that
hides the peculiarities of switching to a different CPU/arch in ramstage
in the Tegra SoC directories.
BRANCH=None
BUG=None
TEST=Built Ryu and Smaug. !!!UNTESTED!!!
Change-Id: Ib3a0448b30ac9c7132581464573efd5e86e03698
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12078
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch expands the existing ENV_<stage> macros in <rules.h> with a
set of ENV_<arch> macros which can be used to detect which architecture
the current compilation unit is built for. These are more consistent
than compiler-defined macros (like '#ifdef __arm__') and will make it
easier to write small, architecture-dependent differences in common code
(where we currently often use IS_ENABLED(CONFIG_ARCH_...), which is
technically incorrect in a world where every stage can run on a
different architecture, and merely kinda happened to work out for now).
Also remove a vestigal <arch/rules.h> from ARM64 which was no longer
used, and genericise ARM subarchitecture Makefiles a little to make
things like __COREBOOT_ARM_ARCH__ available from all file types
(including .ld).
BUG=None
TEST=Compiled Falco, Blaze, Jerry and Smaug.
Change-Id: Id51aeb290b5c215c653e42a51919d0838e28621f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12433
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The existing arm64 architecture code has been developed for the Tegra132
and Tegra210 SoCs, which only start their ARM64 cores in ramstage. It
interweaves the stage entry point with code that initializes a CPU (and
should not be run again if that CPU already ran a previous stage). It
also still contains some vestiges of SMP/secmon support (such as setting
up stacks in the BSS instead of using the stage-peristent one from
memlayout).
This patch splits those functions apart and makes the code layout
similar to how things work on ARM32. The default stage_entry() symbol is
a no-op wrapper that just calls main() for the current stage, for the
normal case where a stage ran on the same core as the last one. It can
be overridden by SoC code to support special cases like Tegra.
The CPU initialization code is split out into armv8/cpu.S (similar to
what arm_init_caches() does for ARM32) and called by the default
bootblock entry code. SoCs where a CPU starts up in a later stage can
call the same code from a stage_entry() override instead.
The Tegra132 and Tegra210 code is not touched by this patch to make it
easier to review and validate. A follow-up patch will bring those SoCs
in line with the model.
BRANCH=None
BUG=None
TEST=Booted Oak with a single mmu_init()/mmu_enable(). Built Ryu and
Smaug.
Change-Id: I28302a6ace47e8ab7a736e089f64922cef1a2f93
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12077
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds CC6 power save support to the AMD Family 15h
support code. As CC6 is a complex power saving state that
relies heavily on CPU, northbridge, and southbridge cooperation,
this patch alters significant amounts of code throughout the
tree simultaneously.
Allowing the CPU to enter CC6 allows the second level of turbo
boost to be reached, and also provides significant power savings
when the system is idle due to the complete core shutdown.
Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11979
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When we first added ARM support to coreboot, it was clear that the
bootblock would need to do vastly different tasks than on x86, so we
moved its main logic under arch/. Now that we have several more
architectures, it turns out (as with so many things lately) that x86 is
really the odd one out, and all the others are trying to do pretty much
the same thing. This has already caused maintenance issues as the ARM32
bootblock developed and less-mature architectures were left behind with
old cruft.
This patch tries to address that problem by centralizing that logic
under lib/ for use by all architectures/SoCs that don't explicitly
opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option).
This works great out of the box for ARM32 and ARM64. It could probably
be easily applied to MIPS and RISCV as well, but I don't have any of
those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and
leave that for later cleanup.
BRANCH=None
BUG=None
TEST=Built Jerry and Falco, booted Oak.
Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to have a proper runtime-modifyable page table API (e.g. to
remap DRAM after it was intialized), we need to remove any external
bookkeeping kept in global variables (which do not persist across
stages) from the MMU code. This patch implements this in a similar way
as it has recently been done for ARM32 (marking free table slots with a
special sentinel value in the first PTE that cannot occur as part of a
normal page table).
Since this requires the page table buffer to be known at compile-time,
we have to remove the option of passing it to mmu_init() at runtime
(which I already kinda deprecated before). The existing Tegra chipsets
that still used it are switched to instead define it in memlayout in a
minimally invasive change. This might not be the best way to design this
overall (I think we should probably just throw the tables into SRAM like
on all other platforms), but I don't have a Tegra system to test so I'd
rather keep this change low impact and leave the major redesign for
later.
Also inlined some single-use one-liner functions in mmu.c that I felt
confused things more than they cleared up, and fixed an (apparently
harmless?) issue with forgetting to mask out the XN page attribute bit
when casting a table descriptor to a pointer.
BRANCH=None
BUG=None
TEST=Compiled Ryu and Smaug. Booted Oak.
Change-Id: Iad71f97f5ec4b1fc981dbc8ff1dc88d96c8ee55a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Among its other restrictions (which are noted in a comment above the
function prototype and stay in place), our makeshift fine-grained page
table support for ARM32 has the undocumented feature that it relies on
a global bookkeeping variable, causing all sorts of fun surprises when
you try to use it from multiple stages during the same boot. This patch
redesigns the bookkeeping to stay completely inline in the (persistent)
TTB which should resolve the issue. (This had not been a problem on any
of our platforms for now... I just noticed this because I was trying to
solve the same issue on ARM64.)
BRANCH=None
BUG=None
TEST=Booted veyron_jerry. Mapped a second fine-grained memory range
from romstage, confirmed that it finds the next free spot and leaves the
bootblock table in place.
Change-Id: I325866828b4ff251142e1131ce78b571edcc9cf9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12074
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove SMP
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: Ife24d53eed9b7a5a5d8c69a64d7a20a55a4163db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11909
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove spintable
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: I1f38b8d8b0952eee50cc64440bfd010b1dd0bff4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11908
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
With the removal of secmon from coreboot there are no
power down operations required. As such remove the
A57 power down support.
Change-Id: I8eebb0ecd87b5e8bb3eaac335d652689d7f57796
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11898
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
PMIOxEE is for setting USB3 power rail. Set it to S0, otherwise
going into hibernation can not be wake up.
Change-Id: I692497bad24d745738d670897e725a568c1db114
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11373
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Refactor acpi_create_dmar_drhd_ds_pci() and add similar functions for
I/O-APICs and MSI capable HPETs. We violate the spec [1] here, which
talks about 16-bit source-ids spread over start_bus and path entries.
Intel actually uses bus/dev/fn identification for those devices too,
and so do we.
[1] Intel Virtualization Technology for Directed I/O
Architecture Specification
Document-Number: D51397
Change-Id: I0fce075961762610d44b5552b71e010511871fc2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12192
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a parameter to acpi_create_dmar() for the flags field and define
flags given by the spec [1].
[1] Intel Virtualization Technology for Directed I/O
Architecture Specification
Document-Number: D51397
Change-Id: I03ae32f13bb0061bd3b9bef607db175d9b0bc5e1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12191
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix a function call in the normal path using the original function
name and arguments in code that was changed in commit 3bfd7cc6
(drivers/pc80: Rework normal / fallback selector code)
This commit reworked most of the fallback / normal code,
however the normal code paths were not fully tested by Jenkins,
so this was missed.
Change-Id: Ied66334977272a13b7a7307ff4d9f34eb22040aa
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12315
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
On x86_64 we need to leave long mode before we can switch to 16bit
mode. Oh joy! When's my 64bit resume pointer coming?
Why didn't this get caught earlier? Seems the Asrock E350M2 didn't
do Suspend/Resume?
Yes, I know it's Intel syntax. Will be converted to AT&T syntax
as soon as the whole thing actually works.. 8)
Change-Id: Ic51869cf67d842041f8842cd9964d72a024c335f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11106
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Some registers only allow word-sized or half-word-sized operations and will
cause a data fault when accessed with byte-sized operations.
However, the compiler may or may not break such an operation into smaller
(byte-sized) chunks. Thus, we need to reliably perform word-sized operations for
32 bit read/write and half-word-sized operations for 16 bit read/write.
This is particularly the case on the rk3288 SRAM registers, where the watchdog
tombstone is stored. Moving to GCC 5.2.0 introduced a change of strategy in the
compiler, where a 32 bit read would be broken into byte-sized chunks, which
caused a data fault when accessing the watchdog tombstone register.
The definitions for byte-sized memory operations are also adapted to stay
consistent with the rest.
Change-Id: I1fb3fc139e0a813acf9d70f14386a9603c9f9ede
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11698
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To support x86 verstage one needs a working buffer for
vboot. That buffer resides in the cache-as-ram region
which persists across verstage and romstage. The current
assumption is that verstage brings cache-as-ram up
and romstage tears cache-as-ram down. The timestamp,
cbmem console, and the vboot work buffer are persistent
through in both romstage and verstage. The vboot
work buffer as well as the cbmem console are permanently
destroyed once cache-as-ram is torn down. The timestamp
region is migrated. When verstage is enabled the assumption
is that _start is the romstage entry point. It's currently
expected that the chipset provides the entry point to
romstage when verstage is employed. Also, the car_var_*()
APIs use direct access when in verstage since its expected
verstage does not tear down cache-as-ram. Lastly, supporting
files were added to verstage-y such that an x86 verstage
will build and link.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using separate verstage.
Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For vboot1 there was an rmodule that was loaded and ran to
do the firmware verification. That's no longer used so remove
the last vestiges of VBOOT_STUB.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I6b41544874bef4d84d0f548640114285cad3474e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since we now have more freedom in the bootblock linking step it no
longer makes sense to use a monolithic bootblock.S. Code segments must
still be included as the order in bootblock.S determines code flow.
However, non-code flow related assembly stubs don't need to be directly
included in bootblock.S
Change-Id: I08e86e92d82bd2138194ed42652f268b0764aa54
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11792
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The code flow doesn't fall through to walkcbfs, as it does in the rest
of bootblock.S. Instead, walkcbfs is called (albeit via a jmp). The
linker cannot know this when walkcbfs.S is included directly.
When we use a CAR bootblock, we lose several hundred bytes because
walkcbfs is not garbage-collected, yet it isn't used. This problem
is solved by assembling walkcbfs.S separately, and linking it.
Change-Id: Ib3a976db09b9ff270b7677cb4f9db80b0b025e22
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11785
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As part of preparing for systems with non-memory-mapped media, we want
to be able to call into C code. This change allows us to link C code
directly into the bootblock. The steps of going from bootblock main()
to CAR setup to C code will be implemented in subsequent patches.
Note that a few files selected with bootblock-y will now be compiled
for the bootblock as well, but since we enabled garbage collection,
they will not be included in the final binary.
Change-Id: I5ca6dcaf176f5469c6a3bb925859399123493bc6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11783
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The only difference between the ifeq/else/endif guarded rules is the
linker flags specific to x86. Add those flags to LDFLAGS_bootblock,
and only use one rule for bootblock.debug.
Change-Id: I986a93e0418f05fb273512d7efe0573052493332
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11782
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The x86 bootblock linking is a mess. The bootblock is treated in
a very special manner, and never received the update to link-time
garbage collection.
On newer x86 platforms, the boot media is no longer memory-mapped.
That means we need to do a lot more setup in the bootblock. ROMCC is
unsuitable for this task, and walkcbfs only works on memory-mapped
CBFS. We need to revise the x86 bootflow for this new case.
The approach this patch series takes is to perform CAR setup in the
bootblock, and load the following stage (either romstage or verstage)
from the boot media. This approach is not new, but has been done on
our ARM ports for years.
Since we will be adding .c files to the bootblock, it is prudent to
use link-time garbage collection. This is also consistent to how we
do things on other architectures. Unification FTW!
Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11781
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to do a verification of romstage on x86 one needs to
run verstage which verifies romstage (and the memory init code).
However, x86 doesn't have SRAM like every other modern SoC so
managing the cache-as-ram region is especially critical.
First move all of the "shared" objects to the beginning of
the .car.data section. This change then ensures that each stage
using car.ld to link has the same consistent view of the addresses
of these fixed-sized objects in cache-as-ram. The CAR_GLOBALs can
be unique per stage. However, these variables are expected to have
a value of zero at the start of each stage. In order to allow a
stage to provide those semantics outside of the initial cache-as-arm
setup routine add _car_global_start and _car_global_end symbols.
Those symbols can be used to clear the CAR_GLOBALs for that stage.
Note that the timestamp region can't be moved out similarly to the
pre-ram cbmem console because the object storage of the timestamp
cache is used *after* cache-as-ram is torn down to indicate if the
cache should be used or not. Therefore, that timestamp needs to
migrated to ram. A logic change in src/lib/timestamp.c could
alleviate this requirement, but that task wasn't tackled in this
patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I15e9f6b0c632ee5a2369da0709535d6cb0d94f61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to support verstage on x86 one needs to link verstage
like romstage since it needs all the cache-as-ram goodies. Therefore,
provide a macro that one can invoke that provides the necessary
recipes for linking that particular stage in such an environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I12f4872df09fff6715829de68fc374e230350c2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11739
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The output of command below,
# i386-elf-nm build/cbfs/fallback/romstage_null.offenders | \
grep -q "" ; echo $?
has different result on MacOS, OS X Mavericks, which outputs 0.
On linux, it outputs 1.
I assume it is misleading to search an empty string in a empty
string. Change it to testing if the string is empty.
Change-Id: Ie4b8fe1fb26df092e2985937251a49feadc61eb0
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11600
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Unlike the other stages, the payload requires virtual memory to be set up
and also a privelege level change.
Change-Id: Ibbe2a55f7719d917f121a53a17c6d90e6b2ab3d1
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/11699
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If we use a linux payload/any payload that wants to manage virtual
memory, and the payload is a supervisor (thus requiring virtual
addressing before being started), we need to make sure that the page
table is mapped into the virtual address space. Move the start address
of the tables so the payload can manage virtual memory.
Change-Id: I1d99e46f38a38a163fb1c7c517b1abca80cde0dc
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11621
Tested-by: build bot (Jenkins)
Existing memlayout code placed sections in overlapping areas, and would
overwrite the payload if it was large enough. Update memlayout.ld in
src/mainboard/emulation/spike-riscv to represent the spike emulator, and
add sbi interface which now has room into src/arch/riscv/bootblock.S.
Add utility code to qemu-riscv, but emulator itself has yet to be
updated to new ISA and as such should not be used.
Update Makefile to include all the files necessary for sbi interface.
Clean up unused include in src/arch/riscv/include/atomic.h and
whitespace in src/mainboard/emulation/spike-riscv/memlayout.ld
Fixed whitespace issues in spike_util.c
Change-Id: Id97fe75e45ac1361005bec6d421756ee3f98a508
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11370
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that cbfstool supports XIP for romstage utilize it.
This removes the double link steps with the cbfstool
locate and add-stage sandwich.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I1ec555f523a94dd4b15fe8186cbe530520c622c0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11670
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Trap handling code was bugged in that it loaded in the wrong stack
pointer, overwriting the space the processor uses to talk to its host
for doing device requests. Fix this issue, as well as add support for
handling misaligned loads the same way we handle misaligned stores.
Change-Id: I68ba3a114b7167b3212bb0bed181a7595f0b97d8
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11620
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
RISCV requires the bios/bootloader to set up an interface by which it
can get information about memory, talk to host devices, etc. Put
implementation for spike in
src/mainboard/emulation/spike-riscv/spike_util.c, and
src/arch/riscv/trap_handler.c
Change-Id: Ie1d5f361595e48fa6cc1fac25485ad623ecdc717
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11368
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Execution in supervisor level code in RISCV requires early setup of
virtual memory. Add initialization calls in
src/arch/riscv/virtual_memory.c to implement the required page table
setup, and helper functions to use when jumping to the payload correctly
in riscv.
Change-Id: I46e080e0ee8dc13277d567dcd4bf0f61a4507b76
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11369
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Previously there were 2 paths in linking ramstage. One was used for
RELOCATABLE_RAMSTAGE while the other was fixed location. Now that
rmodtool can handle multiple secitons for a single proram segment
there's no need for linking ramstage using lib/rmodule.ld. That
also means true rmodules don't have symbols required for ramstage
purposes so fix memlayout.h. Lastly add default rules for creating
rmod files from the known file names and locations.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. Inspected ramstage.debug as well as rmodules
created during the build.
Change-Id: I98d249036c27cb4847512ab8bca5ea7b02ce04bd
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11524
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add an LDFLAGS_common variable and use that for each stage
during linking within all the architectures. All the architectures
support gc-sections, and as such they should be linking in the
same way.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi and analyzed the relocatable ramstage.
Change-Id: I41fbded54055455889b297b9e8738db4dda0aad0
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11522
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
To reduce file clutter merge romstage.ld and ramstage.ld
into a single memlayout.ld. The naming is consistent with
other architectures and chipsets for their linker script
names. The cache-as-ram linking rules are put into a separate
file such that other rules can be applied for future verstage
support.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi and dmp/vortex86ex.
Change-Id: I1e8982a6a28027566ddd42a71b7e24e2397e68d2
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bring rmodule linking into the common linking method.
The __rmodule_entry symbol was removed while using
a more common _start symbol. The rmodtool will honor
the entry point found within the ELF header. Add
ENV_RMODULE so that one can distinguish the environment
when generating linker scripts for rmodules. Lastly,
directly use program.ld for the rmodule.ld linker script.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi and analyzed the relocatable ramstage,
sipi_vector, and smm rmodules.
Change-Id: Iaa499eb229d8171272add9ee6d27cff75e7534ac
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11517
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
All the other architectures are using the memlayout
for linking romstage. Use that same method on x86
as well for consistency.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built a myriad of boards. Analyzed readelf output.
Change-Id: I016666c4b01410df112e588c2949e3fc64540c2e
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11510
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
All the other architectures are using the memlayout
for linking ramstage. The last piece to align x86 is
to use arch/header.ld and the macros within memlayout.h
to automaticaly generate the necessary linker script.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built a myriad of boards. Analyzed readelf output.
Change-Id: I012c9b88c178b43bf6a6dde0bab821e066728139
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11508
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Though coreboot started as x86 only, the current approach to x86
linking is out of the norm with respect to other architectures.
To start alleviating that the way ramstage is linked is partially
unified. A new file, program.ld, was added to provide a common way
to link stages by deferring to per-stage architectural overrides.
The previous ramstage.ld is no longer required.
Note that this change doesn't handle RELOCATABLE_RAMSTAGE
because that is handled by rmodule.ld. Future convergence
can be achieved, but for the time being that's being left out.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built a myriad of boards.
Change-Id: I5d689bfa7e0e9aff3a148178515ef241b5f70661
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11507
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The current way the XIP address of romstage is calculated is by
doing a 'cbfstool locate' using a bin file of romstage linked
at address 0. That address is then used for re-linking romstage at
the address spit out by cbfstool. Currently, the linker actually
sets minimum alignment on the text sections as 32 bytes, but it
doesn't actually honor that value. Instead, provide a minimum
alignment for romstage so as not to fight the linker.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built asus/kfsn4-dre. Confirmed ROMSTAGE_BASE == gdtptr.
Change-Id: Id6ec65d257df9ede78c720b0d7d4b56acfbb3f15
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that the only source of ELF sections for romstage are
from directly included .inc files or ROMCC generated inc
files the subsection globs can be removed. i.e. Remove
.rom.data.* and .rom.text.* listings. Lastly, put the
.rom.data section directly after the .rom.text. They
are by definition read-only and they are generated from
the same place.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Spot checked !ROMCC and ROMCC boards. Confirmed
only .rom.text .rom.data sections exist.
Change-Id: Id17cf95c943103de006c5f3f21a625838ab49929
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11505
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The build system was previously determining the flow
of the romstage code by the order of files added to
the crt0s make variable. Those files were then
concatenated together, and the resulting file was added
to the build dependencies for romstage proper.
Now romstage.S is added that can be built using
the default object file rules. The generated
romstage.inc is pulled in by way of an #include in the
newly added romstage.S.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built vortex, rambi, and some asus boards. compared
readelf -e output.
Change-Id: Ib1168f9541eaf96651c52d03dc0f60e2489a77bd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11504
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Previously, the x86 romstage build process was unconditionally
creating a romstage.inc and adding it to crt0s. This step is
inherently not necessary in the !ROMCC case becaue the romstage.inc
was created by the compiler outputting assembler. That means
MAINBOARDDIR/romstage.c is truly a C environment that requires
some sort of assembler stub to call into (cache_as_ram.inc from
the chipset dirs). Therefore, remove this processing. The result
is that MAINBOARDDIR/romstage.c can use the normal build steps
in creating an object and linking. The layout of romstage.elf
will change but that's only from a symbol perspective.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built multitude of boards. Compared readelf -e output.
Change-Id: I9b8079caaaa55e3ae20d3db4c9b8be04cdc41ab7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11503
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The build system was previously determining the flow
and linking scripts bootblock code by the order of files
added to the bootblock_inc bootblock-y variables.Those
files were then concatenated together and built by a myriad of
make rules.
Now bootblock.S and bootblock.ld is added so that bootblock
can be built and linked using the default build rules.
CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the
chipset code to place include files in the path of the bootblock
program -- a replacement for the chipset_bootblock_inc
make variable.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built vortex, rambi, and some asus boards.
Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11495
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
coreboot has no CREDITS file.
Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11514
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to prepare for more unification of the linker
scripts prefix pci_drivers, epci_drivers, cpu_drivers, and
ecpu_drivers with an underscore.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built different boards includes ones w/ and w/o relocatable
ramstage.
Change-Id: I8918b38db3b754332e8d8506b424f3c6b3e06af8
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11506
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When building up which files to include in romstage there
were both 'cpu_incs' and 'cpu_incs-y' which were used to
generate crt0.S. Remove the former to settle on cpu_incs-y
as the way to be included.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. No include file changes.
Change-Id: I8dc0631f8253c21c670f2f02928225ed5b869ce6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11494
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the timestamp tick frequency within the timestamp table so
the cbmem utility doesn't try to figure it out on its own. Those
paths still exist for x86 systems which don't provide tsc_freq_mhz().
All other non-x86 systems use the monotonic timer which has a 1us
granularity or 1MHz.
One of the main reasons is that Linux is reporting
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq as the true
turbo frequency on turbo enables machines. This change also fixes
the p-state values honored in cpufreq for turbo machines in that
turbo p-pstates were reported as 100MHz greater than nominal.
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and booted on glados. Confirmed table frequency honored.
Change-Id: I763fe2d9a7b01d0ef5556e5abff36032062f5801
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The src/lib/timestamp.c already has an implementation using
timer_monotonic_get() for timestamp_get(). Use that instead
of duplicating the logic.
BUG=chrome-os-partner:44669
BRANCH=None
TEST=None
Change-Id: If17be86143f217445bd64d67ceee4355fa482d39
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11468
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This patch adds support to enable a linker workaround to a hardware
erratum on some early Cortex-A53 revisions. Since the linker option was
added very recently, we use xcompile to test whether the toolchain
supports it first. It is also guarded by a Kconfig since only a few
ARM64 SoCs will need this and it incurs a performance penalty.
BRANCH=none
BUG=none
TEST=Turned it on or off for Smaug and confirmed that it (dis)appeared
in verbose make output accordingly.
Change-Id: I01c9642d3cf489134645f0db6f79f1c788ddb00d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 57128785760c4dfa32d6e6d764756443a9323cb7
Original-Change-Id: Ia5dd124f484e38460d75fb864304e7e8b18d16b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294745
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fix following compilation error.
LINK cbfs/fallback/verstage.debug
/bin/sh: verstage-objs: command not found
/usr/x86_64-pc-linux-gnu/aarch64-cros-linux-gnu/binutils-bin/2.24/ld.bfd.real: warning: cannot find entry symbol stage_entry; defaulting to 00000000000d7000
BRANCH=chromeos-2015.07
BUG=none
TEST=emerge-oak coreboot
Change-Id: I30e4c43625b2d1d076f24e8c2639ce951839661b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2a8936cdf34d315f580819df682335b2998f044f
Original-Change-Id: I9afd57a5a868a348dff2c66cad0a8a09cdb2e911
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292557
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11402
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
do_dcsw_op is coded as a label, it's possible that linker will place
do_dcsw_op on unaligned address. To avoid this situation, we declare
do_dcsw_op as a function. Also explicitly set the 2nd argument of
ENTRY_WITH_ALIGN(name, bits) to 2.
do_dcsw_op:
cbz x3, exit
c103d: b40003e3 cbz x3, c10b9 <exit>
mov x10, xzr
c1041: aa1f03ea mov x10, xzr
adr x14, dcsw_loop_table // compute inner loop address
BRANCH=none
BUG=none
TEST=build and check do_dcsw_op in elf file
Change-Id: Ieb5f4188d6126ac9f6ddb0bfcc67452f79de94ad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 4ee26b76089fab82cf4fb9b21c9f15b29e57b453
Original-Change-Id: Id331e8ecab7ea8782e97c10b13e8810955747a51
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/11395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
RISCV requires a trap handler at the machine stage to deal with
misaligned loads/stores, as well as to deal with calls that a linux
payload will make in its setup. Put required assembly for jumping
into and out of a trap here to be set up by the bootblock in a later
commit.
Change-Id: Ibf6b18e477aaa1c415a31dbeffa50a2470a7ab2e
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11367
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
When the check for global symbols in romstage happens, if everything is
good, a warning appears, telling us that the segment is empty. While the
empty segment is good, the warning is distracting:
"BFD: build/cbfs/fallback/romstage_null.debug: warning: Empty loadable
segment detected, is this intentional ?"
This change hides that particular warning, but shouldn't hide any other
output from objcopy.
Change-Id: If22489280712d02a61c3ee5e0cb2a53db87d6082
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11302
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The asl_template previously unconditionally included
dsdt.aml. However, COMPILE_IN_DSDT=y results in the
dsdt.aml being linked directly into ramstage. Thus
the information is duplicated.
The inclusion of this file unconditionally throws
some errors as certain assets need to be included
in CBFS. However, as there isn't fine-grained
ordering control in how files are added fixed
resource requirements for other assets collide
result in failure to build.
To remedy both things, provide a 2nd argument to
asl_template which defaults to 'y' for CBFS
addition. In the COMPILE_IN_DSDT=y case pass
'n' so that dsdt.aml is no longer added.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=For glados:
Built with COMPILE_IN_DSDT=y. dsdt.aml not included.
Built with COMPILE_IN_DSDT=n. dsdt.aml was included.
Original-Change-Id: I4767e5be2915c1732251fe415017f30314c5efc9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289840
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id1828627ba0a034eb05b2fe23be76e19f3040444
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11166
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The sysinfo object within the k8 ram init is used
to communicate progess/status from all the nodes in the
system. However, the code was assuming where the sysinfo
object lived in cache-as-ram. The layout of cache-as-ram
is dynamic so one needs to do the lookup of the correct
address at runtime. The way the amd code is compiled
by #include'ing .c files makes the solution a little
more complex in that some cache-as-ram support code
needed to be refactored.
Change-Id: I6500fa7b005dc082c4c0b3382ee2c3a138d9ac31
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10961
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Spike support: QEMU RISCV is broken, and the maintainers at Berkeley
are working on it, but at the moment spike is the only way to test
on riscv. Add support for spike console output for debugging.
Privileged ISA: Update to privileged ISA in RISCV (machine,
supervisor, hypervisor, user modes) broke exisitng RISCV asm, and
bootblock.S was updated to match the new spec. Clean old assembly
[pg: things build with gcc 4.9 now, but don't expect them to work.
Hardcoding register names into the assembler language may not be the smartest
idea of the RISCV folks.]
Change-Id: Ie2c109d3c26712c207512f74f28ce1a925e6e181
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The spec states (5.2.10): "The BIOS aligns the FACS on a 64-byte boundary
anywhere within the system's memory address space."
Change-Id: Ie9415e505525dbdd418028d4954018c829921a18
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: fwts 15.08
Reviewed-on: http://review.coreboot.org/11141
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On x86-64 the current way of calculating the base address
of the boot device (SPI flash) gets an unwanted sign extension,
making it live somewhere at the end of 64bit address space.
Enforce rom_base to be at the upper end of the 4G address space.
Change-Id: Ia81e82094d3c51f6c10e02b4b0df2f3e1519d39e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
bootblock.inc requires config.h to be around which may need to be
created. Have make be aware of it.
Change-Id: I79ad003b461d7da7a5afecdae55fdd07ba735821
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11057
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The new toolchain depends on it.
Change-Id: I9070925eeb3f63a6c31e7474ffb9cba15884703d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Even if DEBUG=0, BL31 puts NOTICE(..) messages on serial console. Set
LOG_LEVEL=0 if coreboot does not use serial.
BUG=None
BRANCH=None
TEST=Compiles successfully and no console output from bl31 for
production images.
Change-Id: Ie77bcac3e2a0d314545b6811327c413536c77fb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8e3bcbf6249c80850a87dd66f34d3ff36158641
Original-Change-Id: I1415a3816cd2fa9dd05bcbd36ac0abc3f2759960
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286150
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11014
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
It never made sense to have bootblock_* in init, but
pirq_routing.c in boot, and some ld scripts on the main
level while others live in subdirectories.
This patch flattens the directory hierarchy and makes
x86 more similar to the other architectures.
Change-Id: I4056038fe7813e4d3d3042c441e7ab6076a36384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10901
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Change-Id: I26f1bbf027435be593f11bce4780111dcaf7cb86
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10586
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This allows SoCs/CPUs to have custom stage_entry in order to apply any
fixups that need to run before standard cpu reset procedure.
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully
Change-Id: Iaae7636349140664b19e81b0082017b63b13f45b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 498d04b0e9a3394943f03cad603c30ae8b3805d4
Original-Change-Id: I9a005502d4cfcb76017dcae3a655efc0c8814a93
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284867
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10897
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Kconfigs symbols of type bool are always defined, and can be tested with
the IS_ENABLED() macro.
symbol type except string.
Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The CBFS_BASE_ADDRESS can be compared against values used with cbfstool
to generate warnings. This can help cut down on mistakes and debug
time.
Change-Id: I149007dd637661f799a0f2cdb079d11df726ca86
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10681
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This fixes issues with our clang reference toolchain on ARM.
Change-Id: Ib754941059285f15332bc694814aff6285969545
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10857
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This is not going as far as I would like it to go, but
some of the external payloads have to be fixed up first.
Long term, I would like to directly add payloads/external/*
to subdirs-y and remove one layer of indirection from the
build process.
For now, moving the payload Makefile targets into payloads/
is already a small improvement.
Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10829
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to accommodate tracking timestamps in all the
__PRE_RAM__ stages (bootblock, verstage, romstage, etc)
of a platform one needs to provide a way to specify
a persistent region of SRAM or cache-as-ram to store
the timestamps until cbmem comes online. Provide that
infrastructure.
Based on original patches from chromium.org:
Original-Change-Id: I4d78653c0595523eeeb02115423e7fecceea5e1e
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223348
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Change-Id: Ie5ffda3112d626068bd1904afcc5a09bc4916d16
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/224024
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I8779526136e89ae61a6f177ce5c74a6530469ae1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10790
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The top level Makefile runs the $stage-src .ld scripts through
the preprocessor and puts them in $(obj). Use the preprocessed
.ld files and cat them together into x86 romstage_null.ld.
Change-Id: If71240fbf7231df2b1333a1f8e5160cb8694f6ce
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10743
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While extending the SMBIOS code to write a proper maximum structure size,
the call to elog_smbios_write_type15() was botched.
Fix the name and arguments.
Change-Id: I4c93490b09ddf4da240ff8f2bd8f8cc3f2abd96e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10823
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix up all the code that is using / to use >> for divisions instead.
Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10819
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The option --divide is required by our assembler to ensure that
'/' is not parsed as a comment sign but as a division, because
some of the cache as ram code is using divisions.
The --divide parameter has been part of the GNU as since binutils 2.17.
Hence, compile romstage (which contains cache as ram init) with
-Wa,--divide unconditionally instead of probing for it and adding it to
all compiler invocations (because that is causing random trouble with
clang when compiling the SMM code and calling gcc with --divide instead of
-Wa,--divide)
Change-Id: Ideefb2a243dc1d657ba415a99c1f8ab1d93800e0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The SMBIOS Specification 2.3 and up defines Maximum Structure Size
as the "Size of the largest SMBIOS structure, in bytes, and encompasses
the structure’s formatted area and text strings." The hardcoded size
is too small to accurately represent the maximum SMBIOS structure sizes.
While the field is not used by Linux it is used by some RTOS
implementations, eg. VxWorks.
TEST=Booted Linux and ran github.com/bfrisch/dmidecode which verified
the maximum structure size on Minnowboard Max.
Change-Id: I98087975c53a02857742dea283f4e303485b2ffe
Signed-off-by: Ben Frisch <bfrisch@gmail.com>
Reviewed-on: http://review.coreboot.org/10163
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The arm-trusted-firmware build system may not create the final bl31.elf file
atomically, confusing our make to try to use it before it's ready.
Hence insert a (hopefully, but not guaranteed to be atomic) file move.
Change-Id: Iffc80467e0f4bbc96fc62414d4abfaa7b42634f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10700
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Compilers aren't happy with a declaration of boot_cpu() after defining
boot_cpu to 1.
Change-Id: I22d0db61646f3e226e5996fa94223ffbb6b760e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10696
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add support for loading secure os and pass its entrypoint as bl32 params
to bl31 stage.
BUG=chrome-os-partner:40713
BRANCH=None
TEST=Compiles successfully and loads secure os
Change-Id: I1409ccb7344c1d1b1ddc2b321fdae1beea2f823d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d3dc19025ff11c1e0590306230df7654ef9ad086
Original-Change-Id: Iafd540bf2906d10b5ee009e96179121fecbf5e11
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/273719
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10693
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Bring back the ability to link in the DSDT. This is to help Chrome OS to
switch over to a new upstream quickly (because some of the custom built
mechanisms are a pain with tons of files).
This is supposed to be temporary (famous last words), but I'd rather fix the
lack of CBFS awareness in CrOS bit for good in the time I usually spend on
keeping upstream and CrOS branches close.
Change-Id: I7fa5540bbf5c568c4adca56a09c83b6c7e358ad5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10637
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Move IASL up with the other tools.
- Remove OUT= which is no longer used in the
payloads/external/SeaBIOS Makefile.
Change-Id: I211ddcf3496b533151936fa5cbfa7a92986ec28f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10606
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Ife94f5324971f4fa03e9139f458b985f6fed9d87
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10577
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The EARLY_CONSOLE Kconfig symbol was removed in
commit 48713a1b - console: Drop EARLY_CONSOLE option
The arm64 and mips directories don't even have early_console.c
to include.
Change-Id: Idc60ffb2bac2b180f4fdd0adf5c411e1f692a846
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10615
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I29eaba74185711df055cf56c23ef2bdae0c7b43e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10578
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This does not optimize memcpy for 64bit, it merely makes it compile.
Change-Id: I69ad6bd0c3d5f617d9222643abf7a2ba7c2a0359
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10575
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Allow calls to cpu_phys_address_size and its support functions during
romstage. This enables the proper display of MTRRs during romstage
without duplicating this code.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: I6f6465c150a683ce91f1494ebb5d9ac60b75b795
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6bfd517088b6a2e8a5958a837e6c8c471de19fd0
Original-Change-Id: I429f9beb69298836acdd71d17a7bcb717939dfc2
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277392
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10561
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This CL is in preparing for tegra mtc that is invoked by dev init.
mtc currently requires floating point instructions support.
BUG=chrome-os-partner:40999
BRANCH=none
TEST=Build and boot smaug
Change-Id: I470dfcd86026812d617f9ff4f4fcdce601195857
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e3f7336fc7cedf96dab4eff204616519856f831
Original-Change-Id: I14c0003ce76ddf4b4ebb0cf171ea3c62cab55ef9
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/275112
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10558
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: Ibcfdc08c9aac02fe263afd629fc262f71da80e9a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8695
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Almost all of the code between x86 and x64 can be shared, so select it for
either architecture.
Change-Id: I681149ed7698c08b702bb19f074f369699cef1bf
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8693
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I81f6d8a21ea0d8218f5a4aab2feb39be32f88e01
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8692
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's derived from EEPROM on Lenovo machines and not from user config
which is ignored.
Change-Id: I54fb76a3160e47cd36d33d2937c4bfaddcd36a69
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7055
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
This change adds cache management after loading stages.
Before jumping to a new stage we should flush the data
caches to memory and invalidate instruction cache.
After all segments are loaded CBFS cache is also
flushed.
With this change all stages of coreboot are now executed
successfully. This was tested on Pistachio bring up board,
also known as Urara.
Change-Id: I86e07432c21a803ef1cfc41b633c5df42b99de90
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10456
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The coreboot table address is passed as an argument when jumping
to payload.
With this change depthcharge is loaded and executed properly on urara.
Change-Id: I230d474a91b8d38aff070aa4aac623b6c8f0809c
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The type1 family setting from chromium was mis-merged into the
type2 function. Move it to the correct type1 function.
Bad commit: 51bdc47816
Change-Id: I72e6ef80bbf185a39fcf169c8247dc16462e6bc3
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10498
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
It can be helpful to certain users of the cbmem init hooks
to know if recovery was done or not. Therefore, add this
as a parameter to the hooks.
Change-Id: I049fc191059cfdb8095986d3dc4eee9e25cf5452
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Squashed and adjusted two changes from chromium.git. Covers
CBMEM init for ROMTAGE and RAMSTAGE.
cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API
There are several use cases for performing a certain task when CBMEM is
first set up (usually to migrate some data into it that was previously
kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them
differently: timestamp migration is called explicitly from
cbmem_initialize(), certain x86-chipset-specific tasks use the
CAR_MIGRATION() macro to register a hook, and the CBMEM console is
migrated through a direct call from romstage (on non-x86 and SandyBridge
boards).
This patch decouples the CAR_MIGRATION() hook mechanism from
cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer
description of what it really does. All of the above use cases are
ported to this new, consistent model, allowing us to have one less line
of boilerplate in non-CAR romstages.
BRANCH=None
BUG=None
TEST=Built and booted on Nyan_Blaze and Falco with and without
CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after
boot (and the resume log after S3 resume on Falco). Compiled for Parrot,
Stout and Lumpy.
Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbmem: Extend hooks to ramstage, fix timestamp synching
Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common
CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since
timestamp_sync() was no longer called there. Oops.
This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism
to the cbmem_initialize() call in ramstage. The macro is split into
explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as
possible and prevent surprises (although just using a single macro and
relying on the Makefiles to link an object into all appropriate stages
would also work).
This allows us to get rid of the explicit cbmemc_reinit() in ramstage
(which I somehow accounted for in the last patch without realizing that
timestamps work exactly the same way...), and replace the older and less
flexible cbmem_arch_init() mechanism.
Also added a size assertion for the pre-RAM CBMEM console to memlayout
that could prevent a very unlikely buffer overflow I just noticed.
BRANCH=None
BUG=None
TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once
again show up. Compile-tested for Rambi and Samus.
Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7878
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9599
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9597
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds a few bit counting functions that are commonly needed
for certain register calculations. We previously had a log2()
implementation already, but it was awkwardly split between some C code
that's only available in ramstage and an optimized x86-specific
implementation in pre-RAM that prevented other archs from pulling it
into earlier stages.
Using __builtin_clz() as the baseline allows GCC to inline optimized
assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and
to perform constant-folding if possible. What was previously named log2f
on pre-RAM x86 is now ffs, since that's the standard name for that
operation and I honestly don't have the slightest idea how it could've
ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm
with Float result, whereas the Find First Set operation has no direct
correlation to logarithms that I know of). Make ffs result 0-based
instead of the POSIX standard's 1-based since that is consistent with
clz, log2 and the former log2f, and generally closer to what you want
for most applications (a value that can directly be used as a shift to
reach the found bit). Call it __ffs() instead of ffs() to avoid problems
when importing code, since that's what Linux uses for the 0-based
operation.
CQ-DEPEND=CL:273023
BRANCH=None
BUG=None
TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new
log2() and __ffs() results on Falco for a bunch of test values.
Change-Id: I599209b342059e17b3130621edb6b6bbeae26876
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f
Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/273008
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We test for it in xcompile and add it to CFLAGS.
Change-Id: I041a881b542bc55c1725af384f038da3356e3bb1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10426
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfs_get_file_content was replaced with cbfs_boot_map_with_leak but
36f8d27ea9 failed to get it into account.
Change-Id: I0c7840043b2ea6abaf8e70f4bf1a63c96aedebc1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10403
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Makes it cleaner by putting AML into separate file rather than having
an array in C code.
Change-Id: Ia5d6b50ad9dabdb97ed05c837dc3ccc48b8f490f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10385
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As there can be more than one source of firmware assets this
patch generalizes the notion of locating a particular asset.
struct asset is added along with some helper functions for
working on assets as a first class citizen.
Change-Id: I2ce575d1e5259aed4c34c3dcfd438abe9db1d7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10264
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BRANCH=none
BUG=none
TEST=Booted on Oak and confirmed the output cacheable/non-cacheable
string is correct.
Change-Id: I062c1cc384b8cb9d07038399b1bc7ef47d992103
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 45552f95b55cd9fc81817e4ff02c78e885377065
Original-Change-Id: Ie52066dbefd2f54d0746792b89f0b57767811adb
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/273994
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10390
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have observed issues with enabling CONFIG_SMP and adding prints
before MMU is enabled on Tegra-based SoCs. This seems to be related
to the hardware assisted locks and the restrictions laid down by ARMv8
spec.
BUG=None
BRANCH=None
TEST=Boots to kernel prompt on smaug.
Change-Id: I29a52f5a972baf396c01faba3ae3e5ecd27563e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f52ee4b5b2e9b7f54eee0d105cb7e17f9a7e1613
Original-Change-Id: I432895560f468903c7beef00e78b6d38275a619c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272449
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10311
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current arm64 MMU interface is difficult to use in pre-RAM
environments. It is based on the memranges API which makes use of
malloc(), and early stages usually don't have a heap. It is also built
as a one-shot interface that requires all memory ranges to be laid out
beforehand, which is a problem when existing areas need to change (e.g.
after initializing DRAM).
The long-term goal of this patch is to completely switch to a
configure-as-you-go interface based on the mmu_config_range() function,
similar to what ARM32 does. As a first step this feature is added
side-by-side to the existing interface so that existing SoC
implementations continue to work and can be slowly ported over one by
one. Like the ARM32 version it does not garbage collect page tables that
become unused, so repeated mapping at different granularities will
exhaust the available table space (this is presumed to be a reasonable
limitation for a firmware environment and keeps the code much simpler).
Also do some cleanup, align comments between coreboot and libpayload for
easier diffing, and change all error cases to assert()s. Right now the
code just propagates error codes up the stack until it eventually
reaches a function that doesn't check them anymore. MMU configuration
errors (essentially just misaligned requests and running out of table
space) should always be compile-time programming errors, so failing hard
and fast seems like the best way to deal with them.
BRANCH=None
BUG=None
TEST=Compile-tested rush_ryu. Booted on Oak and hacked MMU init to use
mmu_config_range() insted of memranges. Confirmed that CRCs over all page
tables before and after the change are equal.
Change-Id: I93585b44a277c1d96d31ee9c3dd2522b5e10085b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f10fcba107aba1f3ea239471cb5a4f9239809539
Original-Change-Id: I6a2a11e3b94e6ae9e1553871f0cccd3b556b3e65
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271991
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10304
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This allows SeaBIOS to fill it as necessary.
This is needed to make BitLocker work.
Change-Id: I35858cd31a90c799ee1a240547c4b4a80fa13dd8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10274
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use separate CBMEM allocations for stack and heap on S3 resume path.
The allocation of HIGH_SCRATCH_MEMORY is specific to AGESA and is moved
out of globals and ACPI. This region is a replacement for BIOS_HEAP_SIZE
used on non-resume paths.
Change-Id: I6658ce1c06964de5cf13b4e3c84d571f46ce76f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10316
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This function is required to be implemented by SoC only if some
platform specific parameters are to be passed in from the early
bootloader to bl31 component.
BUG=chrome-os-partner:40414
BRANCH=None
TEST=Compiles successfully.
Change-Id: I6e76a0b6735267971e12aa72a987e8d83f5ad102
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ab8bc12ffc2ee5bf69cef68bae852dcbf7ccb98
Original-Change-Id: If55aaee8d18a8045a5d842145c0e2c97a37a8bca
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272377
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10308
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Each SoC should have a BL31_MAKEARGS += ... defining all the make
arguments required for bl31 component compilation.
BUG=chrome-os-partner:40414
BRANCH=None
TEST=Compiles successfully and boots into bl31.
Change-Id: I20383ab61d012f7294d969f196044a5f1c07dfc1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 72bd297994248a9d96acc6f21d06bb6ff0d5292c
Original-Change-Id: I1ddd5c38e9214021d857d9d586310e23fa4114e0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272430
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10309
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The boot_device is a region_device that represents the
device from which coreboot retrieves and boots its stages.
The existing cbfs implementations use the boot_device as
the intermediary for accessing the CBFS region. Also,
there's currently only support for a read-only view of
the boot_device. i.e. one cannot write to the boot_device
using this view. However, a writable boot_device could
be added in the future.
Change-Id: Ic0da796ab161b8025c90631be3423ba6473ad31c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10216
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This avoids the need to supply weak function and avoids associated risks of
forgetting to link in relevant files.
Change-Id: Ie96475babb4aa4ea8db49023af5b31bfa63b21dc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7373
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Now that the users of cbmem_set_top() always provide a consistent
cbmem_top() value there's no need to have cbmem_set_top() around.
Therefore, delete it.
Change-Id: I0c96e2b8b829eddbeb1fdf755ed59c51ea689d1b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10314
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
On S3 resume, CBMEM_ID_CONSOLE from previous boot is found in ramstage,
even when romstage did not create it. So buffer did not get cleared
on S3 resume path.
Also do not allocate for preram_cbmem_console in CAR when there
are no means to back it up to ram.
Change-Id: I175cebbb938adf2a7414703fefffb8da796e9fa9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10301
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Implementation for cbmem_find() did not work for boards without
EARLY_CBMEM_INIT in romstage.
This is required for S3 resume to work on AGESA plaforms.
First broken with commit 0dff57d
cbmem: switch over to imd-based cbmem
Change-Id: I9c1a4f6839f5d90f825787baad2a3824a04b5bdc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10299
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
For x86 systems employing CONFIG_LATE_CBMEM_INIT, set_top_of_ram() is
called in ramstage to note the upper address of the 32-bit address
space. This in turn is consumed by cbmem. However, in this scenario
cbmem_top() cannot always be relied upon because get_top_of_ram()
doesn't return the same value provided to set_top_of_ram().
To fix the inconsistency in ramstage save the value passed in
to set_top_of_ram() and defer to it as the return value for
cbmem_top().
Change-Id: Ida796fb836c59b9776019e7f8b3f2cd71156f0e5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10313
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Export SLIC table from file in CBFS.
Change-Id: Id0e7fe0a49b9cd50b5e43cd15030e1c2098728ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7202
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
SLIT and SRAT are created this way only on amdk8 and amdfam10.
This saves the need of having a lot of dummies.
Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7052
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Intermediate linking may distort linker behavior (in particular related to
weak symbols). The idea is that archives are closer to 'just a list of
object files', and ideally makes the linker more predictable.
Using --whole-archive, the linker doesn't optimize out object files just
because their symbols were already provided by weak versions. However it
shouldn't be used for libgcc, because that one has some unexpected side-effects.
Change-Id: Ie226c198a93bcdca2d82c02431c72108a1c6ea60
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
MAINBOARD_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: Ica1f16182b556dbf4a3b747237af74bcc4c0608c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10254
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10253
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The configuration of SPSR bits that mask processor exceptions is kinda
oddly hidden as an implict part of the transition() function right now.
It would be odd but not impossible for programs to want to be entered
with enabled exceptions, so let's move these bits to be explicitly set
by the caller like the rest of SPSR instead.
Also clear up some macro names. The SPSR[I] bit is currently defined as
SPSR_IRQ_ENABLE, which is particularly unfortunate since that bit
actually *disables* (masks) interrupts. The fact that there is an
additional SPSR_IRQ_MASK definition with the same value but a different
purpose doesn't really help. There's rarely a point to have all three of
xxx_SHIFT, xxx_MASK and xxx_VALUE macros for single-bit fields, so
simplify this to a single definition per bit. (Other macros in
lib_helpers.h should probably also be overhauled to conform, but I want
to wait and see how many of them really stay relevant after upcoming
changes first.)
BRANCH=None
BUG=None
TEST=None
Change-Id: Id126f70d365467e43b7f493c341542247e5026d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 715600c83aef9794d1674e8c3b62469bdc57f297
Original-Change-Id: I3edc4ee276feb8610a636ec7b4175706505d58bd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270785
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10250
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support for integrating the runtime-resident component
of ARM Trusted Firmware (github.com/ARM-software/arm-trusted-firmware)
called BL31. It expects the ARM TF source tree to be checked out under
$(top)/3rdparty/arm-trusted-firmware, which will be set up in a later
patch.
Also include optional support for VBOOT2 verification (pretty hacky for
now, since CBFSv1 is just around the corner and will make all this so
much better).
BRANCH=None
BUG=None
TEST=Booted Oak with ARM TF and working PSCI (with additional platform
patches).
Change-Id: I8c923226135bdf88a9a30a7f5ff163510c35608d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a1b3b2d56b25bfc1f3b2d19bf7876205075a987a
Original-Change-Id: I0714cc10b5b10779af53ecbe711ceeb89fb30da2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10249
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable:
Make more obvious that there's no code execution here after payload_entry.
[pg: taken from patch linked below]
Change-Id: Ia341e5d290b10ad5ba3edb349b8a7f619022d99f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10247
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: we need to sync the i-cache in both code paths, so do it in
a single location.
[pg: taken from patch linked below]
Change-Id: Iab173acfc6d66e4dccb6f6ab916aea2007632bfd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10246
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: Make spintable handling optional through a kconfig flag.
[pg: taken from patch linked below]
Change-Id: I64610640835473fcc3d9eff01feb5f861b753eb8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10245
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable. Improve locality of code.
[pg: taken from patch linked below]
Change-Id: Ie9ea6a10b9d5e5c33bf020369afcae4f10ef068e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10244
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: the secure monitor entry is now guarded by an explicit if
statement for its Kconfig rather than hiding than in the corresponding
header file. This makes it clear that there are two (soon three)
separate code paths here.
Change-Id: I44993da7a982b08f485b93ffc522d193bb3fa118
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10243
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Rename Kconfig options for secmon and spintable to be prefixed with
ARM64_ instead of ARCH_, which seems to be the standard throughout the
rest of coreboot (e.g. ARM_LPAE or X86_BOOTBLOCK_SIMPLE). I think this
provides a clearer separation between generic options that are selected
by the architecture (e.g. a hypothetical ARCH_HAS_FEATURE_X similar to
some of the MAINBOARD_HAS_... we have) and options that only make sense
in the context of a single architecture.
Change-Id: I38c2efab833f252adbb7b61ef0af60ab25b768b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10242
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The secure monitor entry is now guarded by an explicit if
statement for its Kconfig rather than hiding than in the corresponding
header file. This makes it clear that there are two (soon three)
separate code paths here. Similar change for the optional spintable
feature in the "legacy" payload entry path.
[pg: split out from the patch linked below]
Change-Id: Ia1554959b3268b718a9606e2f79d8f22f336c94d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10248
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the secmon Kconfig guard from Makefiles that add to the secmon
class since they are redundant (the class is simply not used when
compiling without secmon) to improve readability/ease-of-use.
[pg: taken out of the patch linked below]
Change-Id: I2f0ad8a923ca32fcade748ac8ee50c23cf9bafb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10241
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reorganize Kconfig (split out from the original patch linked below)
Change-Id: I84ec8e453dd7a3980de95a455ad21494c601a98c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10240
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Implement the cpu_suspend for the PSCI service in secmon.
BRANCH=none
BUG=chrome-os-partner:39620
TEST=test with CPU idle driver that invoke the cpu_suspend of PSCI
Change-Id: I4cdfab88bf36bf432fb33c56c1ea114b384528f8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 90b3ea3fcb21cb393e30a8359f0328054961f6d5
Original-Change-Id: Ieb76abc017b9c3e074cc018903cef72020306a8f
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269115
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10171
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The linker scripts are added to stage objs so remove those
from the object lists. boot.c will be needed to link verstage
properly.
Change-Id: Ib8427fe015b72e2282219f116a39949739a0af48
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10150
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The linker scripts are added to stage objs so remove those
from the object lists. boot.c will be needed to link verstage
properly. Lastly, VERSTAGE_LIB has no value so remove it.
Change-Id: Ie53b42c4995a96006463ec5b358aa43a731cb1b8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10149
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
arch_program_segment_loaded ensures that the program segment loaded is
synced back from the cache to PoC. dcache_flush_all on arm64 does not
guarantee PoC in case of MP systems. Thus, it is important to track
and sync back all the required segments using
arch_program_segment_loaded. Use this function in rmodules as well
instead of cache_sync_instructions which guarantees sync upto PoC.
BUG=chrome-os-partner:37546
BRANCH=None
TEST=Boots into depthcharge on foster
Change-Id: I64c2dd5e40ea59fa31f300174ca0d0aebcf8041d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35ba0b882b86ff2c29ac766e1d65f403c8346247
Original-Change-Id: I964aa09f0cafdaab170606cd4b8f2e027698aee7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/260908
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10173
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The build system includes a bunch of files into verstage that
also exist in romstage - generic drivers etc.
These create link time conflicts when trying to link both the
verstage copy and romstage copy together in a combined configuration,
so separate "stage" parts (that allow things to run) from "library" parts
(that contain the vboot specifics).
Change-Id: Ieed910fcd642693e5e89e55f3e6801887d94462f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There were some remaining places that used __PRE_RAM__ for
romstage, while it really means 'bootblock or romstage'.
Change-Id: Id9ba0486ee56ea4a27425d826a9256cc20f5b518
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10020
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Do not unconditially supply verstage rules for all
platforms.
Change-Id: Ic0713350aa21a9966fca828211750d25c2b6b71d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9969
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This slightly streamlines integrating the vboot2 library and
prepares for merging verstage and bootblock on selected devices.
Change-Id: I2163d1411d0c0c6bf80bce64796e1b6a5a02b802
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Without this, building with COLLECT_TIMESTAMPS fails.
Fixes a mistake during upstreaming in commit 0de8820.
Change-Id: Ie56bd38649a821f6b22a1e5dee5f50ef397035fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
CPTR_EL3 and CPACR_EL1 are the registers for controlling the trap level
and access right of the FPU/SIMD instructions. Need to save/restore them
in every power cycle to keep the settings consistent.
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I96fc0e0d2620e72b6ae2ffe4d073c9328047dc01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 73e8cc8f25922e7bc218d24fbf4f7c67e15e3057
Original-Change-Id: I51eed07b1bb8f6eb2715622ec5d5c3f80c3c8bdd
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/266073
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9981
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Implement the individual core powerdown sequence as per
Cortex-A57/A53/A72 TRM.
Based-on-the-work-by:
Varun Wadekar <vwadekar@nvidia.com>
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I4719fcbe86b35f9b448d274e1732da5fc75346b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b6bdcc12150820dfad28cef3af3d8220847c5d74
Original-Change-Id: I65abab8cda55cfe7a0c424f3175677ed5e3c2a1c
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265827
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9980
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patchs introduces level specific data cache maintenance operations
to cache_helpers.S. It's derived form ARM trusted firmware repository.
Please reference here.
https://github.com/ARM-software/arm-trusted-firmware/blob/master/
lib/aarch64/cache_helpers.S
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: Ib58a6d6f95eb51ce5d80749ff51d9d389b0d1343
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3d1a16bd0089740f1f2257146c771783beece82
Original-Change-Id: Ifcd1dbcd868331107d0d47af73545a3a159fdff6
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9979
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Same as commit fe0eac5f416e "arm64: Allow cpu specific early setup", we
need the same in secmon too.
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: I5b1347880306a95f99233db12cb99547bad4aa8c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1f70fd940ff92eb5b8991cd777c2894b7a9633cf
Original-Change-Id: Ifce5a6d636051e7a447d055c8e09ed4e29e091c7
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265825
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Call arm64_cpu_early_setup to allow cpu-specific initialization to be
performed. Also, add support for setting SMPEN bit for cortex a57
within arm64_cpu_early_setup.
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully and SMP works for foster
Change-Id: Ifa4e6134dbce3ad63046b3dd9b947c3d9134d5e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fe0eac5f416efcf9f7b05388a17444205a8352c0
Original-Change-Id: I28a05a20e6adf084cd0bf94bdd0c3b492632107c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262993
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9977
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Disable and enable GIC before switching off a CPU and after bringing
it up back respectively.
BUG=None
BRANCH=None
TEST=Compiles successfully and psci commands work for ryu.
Change-Id: Ib43af60e994e3d072e897a59595775d0b2dcef83
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5271d731f0a569583c2b32ef6726dadbfa846d3
Original-Change-Id: I672945fcb0ff416008a1aad5ed625cfa91bb9cbd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265623
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9926
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
PSCI_CPU_OFF is SMC32 call, there is not SMC64 version. Register SMC32
and SMC64 types of PSCI calls.
BUG=None
BRANCH=None
TEST=Compiles successfully and CPU off works fine with PSCI command.
Change-Id: I8df2eabfff52924625426b3607720c5219d38b58
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9228c07f9d9a4dd6325afb1f64b41b9b8711b146
Original-Change-Id: I2f387291893c1acf40bb6aa26f3d2ee8d5d843ea
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265622
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9925
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We support SMC32 calls from AARCH64, however we do not support SMC32
calls from AARCH32. Reflect this policy in the code by using
appropriate names for exception type check in SMC handler.
BUG=None
BRANCH=None
TEST=Compiles successfully and able to turn CPU1 on and off using psci commands.
Change-Id: Ifc3c9e2fe0c4e6e395f2647769a2d07f5f41f57f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbaf712c2c45273a9eb0b0808a0d4d0630023fdd
Original-Change-Id: I133b2c0bbc4968401a028382532bd051d6298802
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265621
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9924
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
CNTFRQ_EL0 can only be set in highest implemented exception level.
Save and restore CNTFRQ_EL0 for secondary cpus in coreboot.
This patch fix the error below:
SANITY CHECK: Unexpected variation in cntfrq. Boot CPU:
0x00000000c65d40, CPU1: 0x00000000000000
BRANCH=none
BUG=none
TEST=boot to kernel on oak board and check secondary cpu's cntfrq.
confirmed cpu1's cntfrq is same as boot cpu's.
Change-Id: I9fbc3c82c2544f0b59ec34b1d631dadf4b9d40eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b47e4e649efc7f79f016522c7d8a240f98225598
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Change-Id: I2d71b0ccfe42e8a30cd1367d10b0f8993431ef8c
Original-Reviewed-on: https://chromium-review.googlesource.com/264914
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9921
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add arm64_arch_timer_init function which should be called per CPU for
setting up the cntfrq register of arch timer. During the Linux kernel
bring up time, it will check the cntfrq register per CPU and should be
the same with the boot CPU.
BRANCH=none
BUG=none
TEST=bring up 4 cores in Linux kernel without warning message of cntfrq
register value
Change-Id: I9cb33a54c2c8f9115bbe545a2338ca8e249b8db6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 253cd3c68bb4513ae2033c12c2f070ee391e5a13
Original-Change-Id: I71068dbdd00a719145410ef6ec466f001ae837ad
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264244
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9915
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to allow proper working of caches, set the correct
shareability option for normal memory.
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully for foster and SMP works.
Change-Id: I5462cb0a2ff94a854f71f58709d7b2e8297ccc44
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e092916780716ac80c3608c1bd8ca2901fbb3bd1
Original-Change-Id: Idd3c096a004d76a8fd75df2a884fcb97130d0006
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9898
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The hardware initialization is now split in basic
initialization (MIPS and system PLL, system clock,
SPIM, UART), and initialization of other hardware
blocks (USB, I2C, ETH). The second part uses board ID
information to select setup that is board specific
(currently only I2C interface is selected through
board ID).
BRANCH=none
BUG=chrome-os-partner:37593
TEST=tested on bring up board for both Urara and Concerto;
to simulate the use of Concerto (I2C3) DIP SW17 was
set to 0.
it works with default settings on Urara
Change-Id: Ic5bbf28ab42545a4fb2aa6fd30592a02ecc15cb5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f2b3db2e7f9fa898214f974ca34ea427196d2e4e
Original-Change-Id: Iac9a082ad84444af1d9d9785a2d0cc3205140d15
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/257401
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=None
BUG=None
TEST=build coreboot, make sure there are fmov instructions
generated by the compiler, and boot to kernel
Change-Id: Ia99c710be77d5baec7a743a726257ef3ec782635
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f770a436a0692c8e57a8c80860a180330b71e82c
Original-Change-Id: Iab4ba979b483d19fe92b8a75d9b881a57985eed7
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262242
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to not duplicate the instruction cache invalidation
sequence provide a common routine to perform the necessary
actions. Also, use it in the appropriate places.
BUG=None
BRANCH=None
TEST=Built on ryu.
Change-Id: I29ea2371d034c0193949ebb10beb840e7215281a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5ab28b5d73c03adcdc0fd4e530b39a7a8989dae
Original-Change-Id: I8d5f648c995534294e3222e2dc2091a075dd6beb
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260949
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9871
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some platforms may pass as a parameter the maskrom or vendor startup
code information when calling the bootblock.
Make sure the bootblock startup code saves this parameter for use by
coreboot. As we don't want to touch memory before caches are
initialized, save the passed in parameter in r10 for the duration of
cache initialization.
Added warning comments to help enforcing that cache initialization
code does not touch r10.
BRANCH=storm
BUG=chrome-os-partner:30623
TEST=with the rest of the patches applied see the QCA uber-sbl report
in the coreboot console output.
Change-Id: Ic6a09e8c3cf13ac4f2d12ee91c7ab41bc9aa95da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e41584f769eb042604883275b0d0bdfbf5b0d358
Original-Change-Id: I517a79dc95040326f46f0b80ee4e74bdddde8bf4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255144
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com>
Reviewed-on: http://review.coreboot.org/9842
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch removes quite a bit of code duplication between cpu_to_le32()
and clrsetbits_le32() style macros on the different architectures. This
also syncs those macros back up to the new write32(a, v) style IO
accessor macros that are now used on ARM and ARM64.
CQ-DEPEND=CL:254862
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu,
Storm and Urara. Booted on Jerry. Tried to compare binary images...
unfortunately something about the new macro notation makes the compiler
evaluate it more efficiently (not recalculating the address between the
read and the write), so this was of limited value.
Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b
Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254866
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch changes the argument order for the (now temporarily unused)
write32() accessor macro (and equivalents for other lengths) from
(value, address) to (address, value) in order to conform with the
equivalent on x86. Also removes one remaining use of write32() on ARM
that slipped through since coccinelle doesn't inspect header files.
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: Id5739b144f6a5cfd40958ea68510dcf0b89fbfa9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f02cae8b04f2042530bafc91346d11bb666aa42d
Original-Change-Id: Ia91c2c19d8444e853a2fc12590a52c2b6447a1b9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch is a raw application of the following spatch to the
directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>,
src/soc/<arm(64)-soc> and src/drivers/gic:
@@
expression A, V;
@@
- write32(V, A)
+ writel(V, A)
@@
expression A, V;
@@
- write16(V, A)
+ writew(V, A)
@@
expression A, V;
@@
- write8(V, A)
+ writeb(V, A)
This replaces all uses of write{32,16,8}() with write{l,w,b}()
which is currently equivalent and much more common. This is a
preparatory step that will allow us to easier flip them all at once to
the new write32(a,v) model.
BRANCH=none
BUG=chromium:451388
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24
Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254862
Reviewed-on: http://review.coreboot.org/9834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix build bug that is referencing vboot_data from
vendorcode/google/chromeos/gnvs.c when CONFIG_HAVE_ACPI_TABLES is not
set.
BRANCH=none
BUG=None
TEST=Build and run on Glados
1. Checkout updated patches for config, skylake and glados through
FspNotify1
2. Verify that mainboard/intel/glados/Kconfig does not select
HAVE_ACPI_TABLES
3. emerge-glados coreboot
4. Test passes if build completes successfully
Change-Id: Ida5ab8b8dafe30b11dc80dab935e3223d4c760d3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1908079360aa065a36956d487eb93142e9c012a1
Original-Change-Id: Icac3845f7e2d1ddffa5f787a640033fba286c13e
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/254360
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9825
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Cache operations are simplified by removing assembly
implementation and replacing it with simpler C code.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; caches are properly
invalidated;
BRANCH=none
Change-Id: I0f092660549c368e98c208ae0c991fe6f5a428d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf99849e75813cba865b15af9e110687816e61e4
Original-Change-Id: I965e7929718424f92f3556369d36a18ef67aa0d0
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250792
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9820
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Using identity_map(), map the DRAM/SRAM regions to themselves (which
happens to be using KUSEG on urara).
The bootblock (which still runs in KSEG0) sets up the identity mapping
in bootblock_mmu_init() so that ROM/RAM stages can be loaded into the
KUSEG address range.
The stack and pre-RAM CBMEM console also remain in KSEG0 since we
don't really care about their physical addresses.
Also splitting CBFS cache to pre and post RAM, to allow for larger
rambase images.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=With the rest of coreboot and depthcharge patches applied:
- booted urara into the kernel login prompt
- from depthcharge CLI tried accessing memory below 0x100000 -
observed the exception.
Change-Id: If78f1c5c54d3587fe83e25c79698b2e9e41d3309
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9668b440b35805e8ce442be62f67053cedcb205e
Original-Change-Id: I187d02fa2ace08b9fb7a333c928e92c54465abc2
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246694
Reviewed-on: http://review.coreboot.org/9816
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Introduce identity_map() function. It takes a memory range and
identity maps it entirely in the TLB table, if possible. As a result
the virtual and physical address ranges are the same.
The function attempts to use as large of a page size as possible for
each region in order to conserve TLB entries.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio with the rest of the patches applied.
Change-Id: I4d781b04699e069a71c49a0c6ca15c7a6b42a468
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 234d32edfd201019b7a723316a79c932c62ce87e
Original-Change-Id: If3e2392b19555cb6dbae8b5559c1b1e53a313637
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246693
Reviewed-on: http://review.coreboot.org/9815
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We recently restructured where the CBFS header is stored
and how it is looked up, with less magic. The RISC-V port
didn't get the memo, so have it follow the pack now.
Change-Id: Ic27e3e7f9acd55027e357f2c4beddf960ea02c4d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9795
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This is necessary to make sure that bootblock uses the default CBFS
header (as it ought to) when multiple CBFS images support is enabled.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=with the rest of the patches applied storm boots all the way inot
the Linux prompt
Change-Id: I5e029d95c5cb085794c7bf5f44513b2144661e38
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 75b2c2ef6c8287db7c3e5879cacfd5dcba4391ac
Original-Change-Id: I5c352921b4c9b6a3294f4658d174e0842d2ee365
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237661
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9770
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
broadcom cygnus hangs if we clean caches by dcache_clean_invalidate_all
at bootblock entry point. this change makes startup code call
dcache_invalidate_all instead.
other boards theoretically should not be affected as long as maskrom
does not hand off execution to bootblock with dirty cache.
BUG=chrome-os-partner:36648,chrome-os-partner:36691
BRANCH=broadcom-firmware
TEST=boot cygnus b0 board, messages were printed on console:
coreboot-688aae9-dirty bootblock Mon Feb 9 13:21:02 PST 2015
starting...
Exception handlers installed.
Change-Id: I05777ca525c97bb3d7cbb5ea7e872a602dcd5a19
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59de5328df9d0502a3b3f7c624d3e86e038de50e
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I9b8850846b941e7e62712e90cc28ad14a68da393
Original-Reviewed-on: https://chromium-review.googlesource.com/251304
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9762
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've traditionally tucked the framebuffer at the end of memory (above
CBMEM) on ARM and declared it reserved through coreboot's resource
allocator. This causes depthcharge to mark this area as reserved in the
kernel's device tree, which may be necessary to avoid display corruption
on handoff but also wastes space that the OS could use instead.
Since rk3288 boards now have proper display shutdown code in
depthcharge, keeping the framebuffer memory reserved across the handoff
(and thus throughout the lifetime of the system) should no longer be
necessary. For now let's just switch the rk3288 implementation to define
it through memlayout instead, which is not communicated through the
coreboot tables and will get treated as normal memory by depthcharge.
Note that this causes it to get wiped in developer/recovery mode, which
should not be a problem because that is done in response to VbInit()
(long before any images are drawn) and 0 is the default value for a
corebootfb anyway (a black pixel).
Eventually, we might want to think about adding more memory types to
coreboot's resource system (e.g. "reserved until kernel handoff", or
something specifically for the frame buffer) to model this situation
better, and maybe merge it with memlayout somehow.
CQ-DEPEND=CL:239470
BRANCH=veyron
BUG=chrome-os-partner:34713
TEST=Booted Jerry, noticed that 'free' now displays 0x7f000 more bytes
than before (curiously not 0x80000 bytes, I guess there's some alignment
waste in the kernel somewhere). Made sure the memory map output from
coreboot looks as expected, there's no visible display corruption in
developer/recovery mode and the 'cbmem' utility still works.
Change-Id: I12b7bfc1b7525f5a08cb7c64f0ff1b174df252d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10afdba54dd5d680acec9cb3fe5b9234e33ca5a2
Original-Change-Id: I1950407d3b734e2845ef31bcef7bc59b96c2ea03
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240819
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9732
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Each type of cache might have different cache line size.
Call the proper get_<*>cache_line function for each cache
type.
Fixes problem with get_L2cache_line which previously
targeted L3 cache line in the config register, instead of
L2 cache.
TODO: add support for tertiary caches and have cache
operations be called per CPU, not per architecture.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; worked as expected;
BRANCH=none
Change-Id: I7de946cbd6bac716e99fe07cb0deb5aa76c84171
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 62e2803c6f2a3ad02dc88f50a4ae2ea00487e3f4
Original-Change-Id: I03071f24aacac1805cfd89e4f44b14ed1c1e984e
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241853
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change defines stage_entry as a weak symbol so that a board
can implement custom stage entry code.
BUG=none
BRANCH=tot
TEST=built all current boards. booted cosmos p1.
Change-Id: If8f6945ecdc5047558bb6359aa997867e36f33b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 86d5008981d0b01652907baab47a476d784a2ceb
Original-Change-Id: Ib43158c4013e6393d86a9aef37cf444a48b9fc79
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238021
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9721
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Commit 54229a7 (arm: Fix checkstack() to use correct stack size) didn't
quite hit the mark. Due to the crazy way our Kconfig includes work, It
accidentally set CONFIG_STACK_SIZE to 0 even on architectures that need
it.
This patch fixes the issue by moving everything back to a single entry
in src/Kconfig, making sure we end up with the intended numbers on all
architectures.
BRANCH=None
BUG=chrome-os-partner:34750
TEST=Built for Pinky, Urara, Falco and Ryu. Confirmed that the generated
.config contained CONFIG_STACK_SIZE=0x0 for the former two, and
CONFIG_STACK_SIZE=0x1000 for the latter.
Original-Change-Id: Ib18561925aafe7c74e6c4f0b10b55000a785e144
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236753
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit c64b127e163f98162f3f7195b6ed09bd5a4b77c4)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2c747b04760bc97f43523596640bfb15317e5730
Reviewed-on: http://review.coreboot.org/9696
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Tested-by: build bot (Jenkins)
checkstack() runs at the end of ramstage to warn about stack overflows,
and it assumes that CONFIG_STACK_SIZE is always the size of the stack to
check. This is only true for systems that bring up multiprocessing in
ramstage and assign a separate stack for each core, like x86 and ARM64.
Other architectures like ARM and MIPS (for now) don't touch secondary
CPUs at all and currently don't look like they'll ever need to, so they
generally stay on the same (SRAM-based) stack they have been on since
their bootblock.
This patch tries to model that difference by making these architectures
explicitly set CONFIG_STACK_SIZE to zero, and using that as a cue to
assume the whole (_estack - _stack) area in checkstack() instead. Also
adds a BUG() to the stack overflow check, since that is currently just
as non-fatal as the BIOS_ERR message (despite the incorrect "SYSTEM
HALTED" output) but a little more easy to spot. Such a serious failure
should not drown out in all the normal random pieces of lower case boot
spam (also, I was intending to eventually have a look at assert() and
BUG() to hopefully make them a little more useful/noticeable if I ever
find the time for it).
BRANCH=None
BUG=None
TEST=Booted Pinky, noticed it no longer complains about stack overflows.
Built Falco, Ryu and Urara.
Change-Id: I6826e0ec24201d4d83c5929b281828917bc9abf4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 54229a725e8907b84a105c04ecea33b8f9b91dd4
Original-Change-Id: I49f70bb7ad192bd1c48e077802085dc5ecbfd58b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/235894
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9610
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Since we can now reduce our vboot2 work buffer by 4K, we can use all
that hard-earned space for the CBMEM console instead (and 4K are
unfortunately barely enough for all the stuff we dump with vboot2).
Also add console_init() and exception_init() to the verstage for
CONFIG_RETURN_FROM_VERSTAGE, which was overlooked before (our model
requires those functions to be called again at the beginning of every
stage... even though some consoles like UARTs might not need it, others
like the CBMEM console do). In the !RETURN_FROM_VERSTAGE case, this is
expected to be done by the platform-specific verstage entry wrapper, and
already in place for the only implementation we have for now (tegra124).
(Technically, there is still a bug in the case where EARLY_CONSOLE is
set but BOOTBLOCK_CONSOLE isn't, since both verstage and romstage would
run init_console_ptr() as if they were there first, so the romstage
overwrites the verstage's output. I don't think it's worth fixing that
now, since EARLY_CONSOLE && !BOOTBLOCK_CONSOLE is a pretty pointless
use-case and I think we should probably just get rid of the
CONFIG_BOOTBLOCK_CONSOLE option eventually.)
BRANCH=None
BUG=None
TEST=Booted Pinky.
Change-Id: I87914df3c72f0262eb89f337454009377a985497
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 85486928abf364c5d5d1cf69f7668005ddac023c
Original-Change-Id: Id666cb7a194d32cfe688861ab17c5e908bc7760d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232614
Reviewed-on: http://review.coreboot.org/9607
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have known for a while that the old x86 model of calling init_timer()
in ramstage doesn't make sense on other archs (and is questionable in
general), and finally removed it with CL:219719. However, now timer
initialization is completely buried in the platform code, and it's hard
to ensure it is done in time to set up timestamps. For three out of four
non-x86 SoC vendors we have brought up for now, the timers need some
kind of SoC-specific initialization.
This patch reintroduces init_timer() as a weak function that can be
overridden by platform code. The call in ramstage is restricted to x86
(and should probably eventually be removed from there as well), and
other archs should call them at the earliest reasonable point in their
bootblock. (Only changing arm for now since arm64 and mips bootblocks
are still in very early state and should sync up to features in arm once
their requirements are better understood.) This allows us to move
timestamp_init() into arch code, so that we can rely on timestamps
being available at a well-defined point and initialize our base value as
early as possible. (Platforms who know that their timers start at zero
can still safely call timestamp_init(0) again from platform code.)
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit.
Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa
Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234062
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9606
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Non-x86 boards currently need to hardcode the position of their CBFS
master header in a Kconfig. This is very brittle because it is usually
put in between the bootblock and the first CBFS entry, without any
checks to guarantee that it won't overlap either of those. It is not fun
to debug random failures that move and disappear with tiny alignment
changes because someone decided to write "ORBC1112" over some part of
your data section (in a way that is not visible in the symbolized .elf
binaries, only in the final image). This patch seeks to prevent those
issues and reduce the need for manual configuration by making the image
layout a completely automated part of cbfstool.
Since automated placement of the CBFS header means we can no longer
hardcode its position into coreboot, this patch takes the existing x86
solution of placing a pointer to the header at the very end of the
CBFS-managed section of the ROM and generalizes it to all architectures.
This is now even possible with the read-only/read-write split in
ChromeOS, since coreboot knows how large that section is from the
CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be
changed on systems that place other data next to coreboot/CBFS in ROM).
Also adds a feature to cbfstool that makes the -B (bootblock file name)
argument on image creation optional, since we have recently found valid
use cases for CBFS images that are not the first boot medium of the
device (instead opened by an earlier bootloader that can already
interpret CBFS) and therefore don't really need a bootblock.
BRANCH=None
BUG=None
TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco.
Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c
Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229975
Reviewed-on: http://review.coreboot.org/9620
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some projects (like ChromeOS) put more content than described by CBFS
onto their image. For top-aligned images (read: x86), this has
traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the
area actually managed by CBFS, as opposed to ROM_SIZE) that is used to
calculate the CBFS entry start offset. On bottom-aligned boards, many
define a fake (smaller) ROM_SIZE for only the CBFS part, which is not
consistently done and can be an issue because ROM_SIZE is expected to be
a power of two.
This patch changes all non-x86 boards to describe their actual
(physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a
mainboard Kconfig select (which is the correct place to declare
unchangeable physical properties of the board). It also changes the
cbfstool create invocation to use CBFS_SIZE as the -s parameter for
those architectures, which defaults to ROM_SIZE but gets overridden for
special use cases like ChromeOS. This has the advantage that cbfstool
has a consistent idea of where the area it is responsible for ends,
which offers better bounds-checking and is needed for a subsequent fix.
Also change the FMAP offset to default to right behind the (now
consistently known) CBFS region for non-x86 boards, which has emerged as
a de-facto standard on those architectures and allows us to reduce the
amount of custom configuration. In the future, the nightmare that is
ChromeOS's image build system could be redesigned to enforce this
automatically, and also confirm that it doesn't overwrite any space used
by CBFS (which is now consistently defined as the file size of
coreboot.rom on non-x86).
CQ-DEPEND=CL:231576,CL:231475
BRANCH=None
BUG=chromium:422501
TEST=Built and booted on Veyron_Pinky.
Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71
Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9619
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This provides the opportunity to remove the kludge of disabling caches
altogether in the bootblock.
[pg: originally, this commit also provided automatic cache management
after loading stages, ie. flush dcache, so code ends up in icache. This
is done differently in upstream, so it's left out here]
BUG=chrome-os-partner:34127, chrome-os-partner:31438
TEST=with this fix romstage, ramstage and payload are executed properly
BRANCH=none
Change-Id: I568c68d02b2cd9c1c2c9c1495ba3343c82509ccc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 95ab0f159cabf21fc100f371d451211e7d113761
Original-Change-Id: Iaf90b052073dd355ab9114e8dba9f5ef76188c94
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/232410
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9618
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Until proper MIPS cache management is available it is necessary to
disable data and instruction caches, otherwise code placed in memory
stays in data cache and is not available for instruction fetched.
BRANCH=none
BUG=chrome-os-partner:31438,chrome-os-partner:34127
TEST=coreboot loading rombase and rambase now succeeds.
Change-Id: I4147e1325edc0b9bb951cd7ce18d5f104f3eaec0
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 93d5bfa1d01fbbabbabef33a22287ceeea28b15b
Original-Change-Id: Ib195ed6e5f08ccaa6bbe3325c2199171bfb63b88
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232191
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9569
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On most platforms, enabling the console and exception handlers are
amongst the very first things you want to do, as they help you see
what's going on and debug errors in other early init code. However, most
ARM boards require some small amount of board-specific initialization
(pinmuxing, maybe clocks) to get the UART running, which is why
bootblock_mainboard_init() (and with it almost all of the actual
bootblock code) always had to run before console initialization for now.
This patch introduces an explicit bootblock_mainboard_early_init() hook
for only that part of initialization that absolutely needs to run before
console output. The other two hooks for SoC and mainboard are moved
below console_init(). This model has already proven its worth before in
the tegra124 and tegra132 custom bootblocks.
BRANCH=None
BUG=chrome-os-partner:32123
TEST=Booted on Pinky. Compiled for Daisy, Storm and Ryu.
Change-Id: I510c58189faf0c08c740bcc3b5a654f81f892464
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f58e84a2fc1c9951e9c4c65cdec1dbeb6a20d597
Original-Change-Id: I4257b5a8807595140e8c973ca04e68ea8630bf9a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231941
Reviewed-on: http://review.coreboot.org/9603
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The information about the DMA memory area is further passed
through the coreboot table to the payload.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA; DMA memory area was used to test the
functionality of the DWC2 USB controller driver; behavior was
as expected.
BRANCH=none
Change-Id: I658e32352bd5fab493ffe15ad9340e19d02fd133
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0debc105b072a37e2a8ae4098a9634d841191d0a
Original-Change-Id: Icf69835dc6a385a59d30092be4ac69bc80245336
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/235910
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9593
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When the i-cache is on and the d-cache is off, the L1 i-cache is still
fetching information through L2 cache.
Since L2 cache is never invalidated, it has stale information.
BRANCH=storm
BUG=none
TEST=Resolves the invalidate data fetch from i-cache while jumping from
bootblock to romstage.
Change-Id: Ibaca1219be2e40ce5bbbd1c124863d0ea71d0466
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a13e20f9b242d8193dcb314a2bdc708c6bdfea51
Original-Change-Id: I252682d372bd505f525f075461b327e4bcf70a1a
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236422
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9587
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With support for initializing registers based on values saved by primary CPU, we
no longer need to invalidate secondary CPU stack cache lines. Before jumping to
C environment, we enable caching and update the required registers.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots both CPU0 and CPU1 on ryu.
Change-Id: Ifee36302b5de25b909b4570a30ada8ecd742ab82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0a0403d06b89dae30b7520747501b0521d16a6db
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I738250f948e912725264cba3e389602af7510e3e
Original-Reviewed-on: https://chromium-review.googlesource.com/231563
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9541
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
startup.c provides function to enable CPU in any stage to save register data
that can be used by secondary CPU (for normal boot) or any CPU (for resume
boot). stage_entry.S defines space for saving arm64_startup_data. This can be
filled by:
1) Primary CPU before bringing up secondary CPUs so that the secondary can use
register values to initialize MMU-related and other required registers to
appropriate values.
2) CPU suspend path to ensure that on resume the values which were saved are
restored appropriately.
stage_entry.S provides a common path for both normal and resume boot to
initialize saved registers. For resume path, it is important to set the
secondary entry point for startup since x26 needs to be 1 for enabling MMU and
cache.
This also ensures that we do not fall into false memory cache errors which
caused CPU to fail during normal / resume boot. Thus, we can get rid of the
stack cache invalidate for secondary CPUs.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots both CPU0 and CPU1 on ryu without mmu_enable and stack
cache invalidate for CPU1.
Change-Id: Ia4ca0e7d35c0738dbbaa926cce4268143c6f9de3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9f5e78469313ddd144ad7cf5abc3e07cb712183a
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I527a95779cf3fed37392b6605b096f54f8286d64
Original-Reviewed-on: https://chromium-review.googlesource.com/231561
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9540
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some registers are available only at EL3. Add conditional read/write functions
that perform operations only if currently we are in EL3.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots to kernel prompt.
Change-Id: Ic95838d10e18f58867b6b77aee937bdacae50597
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 62a0e324a00248dba92cb3e2ac2f4072d0e4e2a7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: Ia170d94adb9ecc141ff86e4a3041ddbf9045bc89
Original-Reviewed-on: https://chromium-review.googlesource.com/231549
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
TCR at EL1 is 64-bit whereas at EL2 and EL3 it is 32-bit. Thus, use 64-bit
variables to read / write TCR at current EL. raw_read_tcr_elx will handle it
automatically by accepting / returning 32-bit / 64-bit values.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots to kernel prompt.
Change-Id: I96312e62a67f482f4233c524ea4e22cbbb60941a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae71f87143f899383d8311a4ef908908116340d7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I459914808b69318157113504a3ee7cf6c5f4d8d1
Original-Reviewed-on: https://chromium-review.googlesource.com/231548
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9537
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
psci_soc_init() was added to allow SoC PSCI initialization.
However, actually calling said function was omitted accidentally.
BUG=chrome-os-partner:32136
BRANCH=None
TEST=Built and noted correct on entry point was used.
Change-Id: I84a397e2dabf149fe8f252ef69d0a7362fa1f194
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a0e6ad41f049bbab483423231db59390894e9b2
Original-Change-Id: I1a4e25fde64ecdc98fa9231f7d9cafc21119630d
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231935
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9530
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Secondary CPUs were intermittently not coming online as expected.
Upon investigation it was found that a cache line needed to be
invalidated that corresponded to the top of the stack for the
failing CPU.
Currently the secondary CPUs come online with caching disabled.
However, the code paths are using C and thus the stack it is assigned.
The MMU is enabled in C after it's pushed its return path onto the
stack that went directly to ram. When the cache line corresponding
to its stack is valid in the cache it will hit once the MMU is enabled.
That hit will have invalid data w.r.t. the return addresses pushed
directly into ram.
This is not the best solution as the only way to guarantee we don't
hit such a situation is to tightly manage resource usage up until
the point of MMU enablement. That can be done in a followup patch.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=On ryu where secondary CPUs weren't coming online consistently,
they now come up.
Change-Id: I03237656da180d1f74df3a8e00029ba8d778bca8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 06ab6afc996cf92c45d4cd6850e31167c2946a95
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Change-Id: I32de749ea48c19e23442e6dc5678c5369ac3b2b6
Original-Reviewed-on: https://chromium-review.googlesource.com/231219
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9527
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The initial MP code assumed all CPUs would come online. That's not
very defensive, and it is a bad assumption. Provide a timeout
mechanism for bring CPUs online.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Multiple times with CPUs working and not working. Boot to kernel.
Change-Id: Ib0aef31f5c732816d65c2e4b3c6a89e159974fdc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9cf5bc2844c8f4ad987cfcb69ef33c73551f0083
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Change-Id: Ifb3b72e3f122b79e9def554c037c9b3d6049a151
Original-Reviewed-on: https://chromium-review.googlesource.com/231070
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9526
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Expand the boot block include file to allow for a file containing reset
routines to be added. Prevent breaking existing platforms by using a
Kconfig value to specify the path to this file, and have the code
include this file only if the Kconfig value is set.
BRANCH=none
BUG=None
TEST=Build and run on Glados
Change-Id: I604f701057d7018f2ed9c3ba49a643c4bca13f00
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c109481d9503916e19ed300c1a3f085e0d2b5c51
Original-Change-Id: I3214399f8156b5ea2ef709ce77e3915cea1523a3
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/248300
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9504
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
SeaBIOS doesn't like CC and LD to contain arguments, so split
those out.
Change-Id: Id651719d529adfa8602a3e4f6685228330f36432
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9378
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Provide support for SoCs to participate in PSCI commands.
There are 2 steps to a command:
1. prepare() - look at request and adjust state accordingly
2. commit() - take action on the command
The prepare() function is called with psci locks held while
the commit() function is called with the locks dropped.
No SoC implements the appropriate logic yet.
BUG=chrome-os-partner:32136
BRANCH=None
TEST=Booted PSCI kernel -- no SMP because cmd_prepare()
knowingly fails. Spintable kernel still brings up both
CPUs.
Change-Id: I2ae4d1c3f3eac4d1060c1b41472909933815d078
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 698d38b53bbc2bc043548792cea7219542b5fe6b
Original-Change-Id: I0821dc2ee8dc6bd1e8bc1c10f8b98b10e24fc97e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226485
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9423
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Newly turned on CPUs need a place to go bring its EL3
state inline with expectations. Plumb this path in for
CPUs turning on as well as waking up from a power down
state. Some of the infrastructure declarations were
moved around for easier consumption in ramstage and
secmon. Lastly, a psci_soc_init() is added to
inform the SoC of the CPU's entry point as well do
any initialization.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted. On entry point not actually utilized.
Change-Id: I2af424c2906df159f78ed5e0a26a6bc0ba2ba24f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dbefec678a111e8b42acf2ae162c1ccdd7f9fd40
Original-Change-Id: I7b8c8c828ffb73752ca3ac1117cd895a5aa275d8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228296
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9422
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Instead of relying on CONFIG_MAX_CPUS to be the number of
CPUs running a platform pass the number of online cpus
from coreboot secmon. That allows for actually enabled
CPUs < CONFIG_MAX_CPUS.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted SMP kernel.
Change-Id: Iaf1591e77fcb5ccf5fe271b6c84ea8866e19c59d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3827af876c247fc42cd6be5dd67f8517457b36e7
Original-Change-Id: Ice10b8ab45bb1190a42678e67776846eec4eb79a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227529
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9397
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The struct cpu_action already tracks entry/arg pointers. Use that
instead of duplicating the same information.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted.
Change-Id: I70e1b471ca15eac2ea4e6ca3dab7d8dc2774a241
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cdddfd8d74d227cb5cbdf15b6871480839fa20d8
Original-Change-Id: I4070ef0df19bb1141a1a47c4570a894928d6a5a4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227549
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current implementation of secmon assumes just entry/arg
are passed to secmon for starting up a CPU. That's lacking
in flexibility. Therefore change secmon_params to contain
both the BSP and secondary CPUs' entry/arg information.
That way more information can be added to secmon_params when
needed.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted SMP kernel using PSCI and spin table.
Change-Id: I84c478ccefdfa4580fcc078a2491f49f86a9757a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c5fb5bd857a4318174f5b9b48e28406e60a466f8
Original-Change-Id: Iafb82d5cabc806b6625799a6b3dff8d77bdb27e9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227548
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There is state within the system that relies on having
all CPUs present in order to proceed with initialization.
The current expectation is that all CPUs are online and
entering the secure monitor. Therefore, wait until all
CONFIG_MAX_CPUs show up.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Can get all CPUs up in kernel using PSCI.
Change-Id: I741a09128e99e0cb0c9f4046b1c0d27582fda963
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 030535b7c9821b40bf4a51f88e289eab8af9aa13
Original-Change-Id: Ia0f744c93766efc694b522ab0af9aedf7329ac43
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227547
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change sets the stack pointer to the value specified in
memlayout.ld before jumping to the bootblock.
BUG=none
BRANCH=ToT
TEST=Built cosmos and all other current boards.
Change-Id: Ic1b790f27bce431124ba70cc2d3d3607c537564b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d50fd02db8bf10147fd808f3030e6297b9ca0aad
Original-Change-Id: I4bb8cea7435d2a0e2c1ced050c3366d2e636cb8a
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225420
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9384
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this adds an entry point jumping to main for the bootblock.
BUG=None
BRANCH=ToT
TEST=Built coreboot for cosmos
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I1c9ea6ba63a1058e09613d969fe00308260037be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 662d0083f25008b55b9bc5fbce9e30e6b80c2c65
Original-Change-Id: I74f2f5e3b3961ab54a7913e6b3a3ab0e6fd813a3
Original-Reviewed-on: https://chromium-review.googlesource.com/225205
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9382
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The arch_run_on_all_cpus[_async]() APIs can run the BSP before
the APs if the BSP's id is less than the APs' ids. Fix this by
ensuring we run the necessary callback on all but self.
BUG=chrome-os-partner:33532
BRANCH=None
TEST=Booted spin table kernel. All CPUs are up.
Change-Id: Ic9a466c3642595bad06cac83647de81873b8353e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 575437354cc20eeac8015a0f7b0c9999ecb0deee
Original-Change-Id: I87e944f870105dbde33b5460660c96c93c3cdf93
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227488
Original-Tested-by: David Riley <davidriley@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9392
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to properly support more arm64 SoCs PSCI needs
to handle the hierarchy of cpus/clusters within the SoC.
The nodes within PSCI are kept in a tree as well as
a depth-first ordered array of same tree. Additionally,
the PSCI states are now maintained in a hierachal manner.
OFF propogates up the tree as long as all siblings are
set to OFF. ON propogates up the tree until a node is
not already set to OFF.
The SoC provides the operations for determining how many
children are at a given affinity level. Lastly, the
secmon startup has been reworked in that all non-BSP CPUs
wait for instructions from the BSP.
BUG=chrome-os-partner:32136
BRANCH=None
TEST=Can still boot into kernel with SMP.
Change-Id: I036fabaf0f1cefa2841264c47e4092c75a2ff4dc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 721d408cd110e1b56d38789177b740aa0e54ca33
Original-Change-Id: I520a9726e283bee7edcb514cda28ec1eb31b5ea0
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226480
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9390
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The cpu_info struct can be easily obtained at runtime
based on smp_processor_id(). To allow easier mapping
between cpu_info and PSCI entities add the mpidr info
to the cpu_info struct.
BUG=chrome-os-partner:32136
BRANCH=None
TEST=Built and booted in SMP. Noted MPIDR messages for each cpu.
Change-Id: I390392a391d953a3b144b56b42e7b81f90d5fec1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d091706f64f1fc4b1b72b1825cab82a5d3cbf23e
Original-Change-Id: Ib10ee4413d467b22050edec5388c0cae57128911
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226481
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9388
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add GENERIC_UDELAY Kconfig option so that a generic
udelay() implementation is provided utilizing the
monotonic timer. That way each board/chipset doesn't
need to duplicate the same udelay(). Additionally,
assume that GENERIC_UDELAY implies init_timer()
is not required.
BUG=None
BRANCH=None
TEST=Built nyan, ryu, and rambi. May need help testing.
Change-Id: I7f511a2324b5aa5d1b2959f4519be85a6a7360e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1a85fbcad778933d13eaef545135abe7e4de46ed
Original-Change-Id: Idd26de19eefc91ee3b0ceddfb1bc2152e19fd8ab
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219719
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9334
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Paging code is tricky and figuring out what is wrong with it can be a
pain. This patch tries to ease the burden by giving a little more
information for prefetch and data aborts, dumping the Instruction Fault
Address Register (IFAR), Instruction Fault Status Register (IFSR) and
Auxiliary Instruction Fault Status Register (AIFSR) or the respective
Data registers. These contain additional information about the cause of
the abort (internal/external, write or read, fault subtype, etc.) and
the faulting address.
BUG=None
TEST=I have read through enough imprecise asynchronous external abort
reports with this patch that I learned the bit pattern by heart.
Change-Id: If1850c4a6df29b1195714ed0bdf025e51220e8ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf3b4924121825a5ceef7e5c14b7b307d01f8e9c
Original-Change-Id: I56a0557d4257f40b5b30c559c84eaf9b9f729099
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remember the XN bit? The one we had so much fun with on Nyan (LPAE)
because not setting it allows random instruction prefetches to device
memory that hang the system every few thousand boots? Thankfully, we had
always been setting it in the non-LPAE MMU code already...
"When the XN bit is 1, a Permission fault is generated if the processor
attempts to execute an instruction fetched from the corresponding memory
region. However, when using the Short-descriptor translation table
format, the fault is generated only if the access is to memory in the
Client domain, see Domains[...]" - ARM A.R.M. section B3.7.2
Oops. This patch changes our Domain Access Control Register (DACR) to
set domain 0 (the only one we are using) to Client. This means that
access permissions (AP[2:0] bits) become enforced, but they are already
set to full access (0b011). It also means that non-LPAE systems will not
be allowed to execute from DCACHE_OFF memory with enabled MMU anymore.
As far as I can see, Veyron_Pinky has been the only board that does
that.
BUG=chrome-os-partner:32118
TEST=Booted Veyron_Pinky with MMU in the bootblock, saw hangs that look
like spurious prefetches and confirmed that this patch fixes them.
Change-Id: I81c00743f938924a5dc8825389fe512a069b77db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbc96db296a41ae700371a8515a1179c142f58e7
Original-Change-Id: I30676a5bfe12d516e5f910f51ee6854f6e5be557
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9343
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds an mmu_config_range_kb() function, which can set memory
types at the 4KB level by chaining a fine-grained page table to an
existing superpage entry. It is only intended for special cases where
this level of precision is really necessary and therefore comes with a
few practical limitations (the area for each invocation must be confined
within a single superpage, and you are not allowed to remap the same
region with mmu_config_range() again later). Since the fine-grained page
tables need some space, boards intending to use this feature must define
a TTB_SUBTABLES() region in their memlayout.ld.
BUG=chrome-os-partner:32848
TEST=Booted both Veyron_Pinky (normal) and Nyan_Blaze (LPAE), ensured
that they still work. Checksummed the page tables with and without this
patch, confirmed that they end up equal. Hacked in some subtable test
entries, hexdumped all tables and manually confirmed that they look as
expected.
Change-Id: I8c3eb7c2eb9c82e2abc5f2c0dda91f5b2eee7023
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f13e60cf5509b9a63fb7b8d84846daf889dc1b7
Original-Change-Id: Iedf7ca435ae337ead85115200d6987fb0d4828d7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223781
Reviewed-on: http://review.coreboot.org/9341
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I overlooked the macro name change from the Kconfig option.
'ARM' and 'V4' should not be separated by a '_'.
Change-Id: I8bf0d851e6fd5b5cfc0aa29af2246540c8cb1399
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9371
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
C0 is a coprocessor register set defined in certain MIPS
architectures. This patch adds macros necessary to access the
registers and a couple of helper macros to access two particular
registers needed in the next patch.
The definitions come straight from arch/mips/include/asm/mipsregs.h in
the 3.14 kernel tree.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=the following patch demonstrates timer counter C0 register
configuration and use.
Change-Id: Ia5d52ffa75f2dd66d4cee3a4ed0af5122ccb2113
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb3d69eaf1561ca0b995720c24dafe2e6e22707d
Original-Change-Id: Ia4b1da40ecc1a03cf1cba0c648d42cd189fbcf93
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227887
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9336
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
... so uint32_t is known by the time it's used.
Change-Id: I7281e869ce2e00165a0e21bc017aa6c0e27827b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9333
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
This allows combining and simplifying linker scripts.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ie5c11bd8495a399561cefde2f3e8dd300f4feb98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9303
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix up commit b3847e64 (program loading: add prog_run() function),
which misses the braces for the if statement, causing the function
also to return if a non-payload program should be run causing the rest
of the stages never to be run.
Change-Id: I04940b218ba71e82af769c8db574528f830d0cbb
Found-by: Coverity, CID 1293136: Control flow issues (NESTING_INDENT_MISMATCH)
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/9306
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Drop the inner underscore for consistency. Follows the
commit stated below.
Change-Id: I75cde6e2cd55d2c0fbb5a2d125c359d91e14cf6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-on-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Based-on-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-on-Reviewed-on: https://chromium-review.googlesource.com/219172
Reviewed-on: http://review.coreboot.org/9290
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Instead of keeping this separate variable around, add linker scripts
to the $(class)-y source lists and let the build system sort things out.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I4af687becf2971e009cb077debc902d2f0722cfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9289
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
So far we assumed that all files in *-srcs are below src/
which wasn't really true actually and will be less true with
future changes.
Fix up crt0.S handling on x86, which is covered by default rules
due to this change.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Icae563c2d545b1aea809406e73faf3b417796a1b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9288
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Secmon needs a special build rule because of the objcopy -B
operation required to include it in ramstage. Utilize the
manual template so builds continue to work with upcoming
build chnages.
Note: secmon is actually missing symbols still so those
still need to be addressed. That looks to be as if
--gc-sections isn't be honored, but I'm actually thinking
the symbols are just erroneously carried over as the
references for these symbols don't show up in the
symbol table:
U coreboot_build
U coreboot_extra_version
U coreboot_version
U default_baudrate
U lb_add_console
U lb_add_serial
U uart_baudrate_divisor
Change-Id: I41c75e93536b73c4304ef3a87dc39d448d1f00d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9300
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The ldscript_ prefix is redundant.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I0f005c0c2abe2fdd6911a2c579cb7ec49ae5c0b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9284
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Instead of having different structures for loading
ramstage and payload align to using struct prog.
This also removes arch_payload_run() in favor of
the prog_run() interface.
Change-Id: I31483096094eacc713a7433811cd69cc5621c43e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8849
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The prog_run() function abstracts away what is required
for running a given program. Within it, there are 2
calls: 1. platform_prog_run() and 2. arch_prog_run().
The platform_prog_run() allows for a chipset to intercept
a program that will be run. This allows for CPU switching
as currently needed in t124 and t132.
Change-Id: I22a5dd5bfb1018e7e46475e47ac993a0941e2a8c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8846
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The struct prog serves as way to consolidate program
loading. This abstraction can be used to perform more
complicated execution paths such as running a program
on a separate CPU after it has been loaded. Currently
t124 and t132 need to do that in the boot path. Follow
on patches will allow the platform to decide how to
execute a particular program.
Note: the vboot path is largely untouched because it's
already broken in the coreboot.org tree. After getting
all the necessary patches pushed then vboot will be
fixed.
Change-Id: Ic6e6fe28c5660fb41edee5fd8661eaf58222f883
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8839
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
It's an unfortunate side effect of our different-archs-per-stage
mechanism that all src/arch/*/Kconfig files are always parsed with no
if blocks to exclude them if they're not relevant. This makes it very
easy to accidentally rely on a Kconfig default set by a totally
different and not applying architecture.
This patch moves a few Kconfigs from ARM and X86 that leaked out like
this into a common Kconfig file for clarity. It also gives ARM64 its
own BOOTBLOCK_CUSTOM mechanism so that it doesn't leech off the ARM one
(currently not used by any board).
In the future, we should maybe prefix all options in the arch/*/Kconfig
files with the architecture name (such as X86_BOOTBLOCK_NORMAL and
ARM_LPAE are already doing), to make it more apparent when they are used
in the wrong place.
BUG=None
TEST=None (tested together with dependent changes)
Change-Id: I3e8bb3dfbb2c4edada621ce16d130bd7387d4eb8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5528aa9252cdf711af3c160da387c6a7bebe9e76
Original-Change-Id: Ieb2d79bae6c6800be0f93ca3489b658008b1dfae
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219171
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9235
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It also creates file names in the build directory and with
the stage sliced in, but keeps the extension for anything
not .c or .S.
Also some handling for non-.c/.S files was adapted to match.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: If8f89a7daffcf51f430b64c3293d2a817ae5120f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9175
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
A branch instruction in a branch delay slot confuses the execution
pipeline and causes an exception.
bootblock.S was written 'by hand', has a branch instruction in branch
delay slot and includes '.set noreorder' directive, which causes it to
crash when trying to branch to main().
Adding a nop instruction fixes the problem. Also adding a nop after
the last branch in the file just in case main() returns and the object
linked next starts with a branch.
BUG=chrome-os-partner:31438
TEST=Running on the simulator can reach main() now
Change-Id: I0882b2eb5ce426f5a311018ffbb6f37a2ca64d98
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221421
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9183
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The ARM SMP feature was added a long time ago and has never really been
used by anyone since. We are still always compiling cpu_info() even
though we don't use it, and it makes some dangerous assumptions about
stack alignment that are not guaranteed anywhere.
I'm planning to change the way the stack boundaries are defined. Rather
than trying to work that into this unsafe, unused and hard to test
feature, I think we should just seal it off with police tape and make
sure that if anyone ever tries to use it again (which currently seems
unlikely), they get forced to do their due diligence on making sure it
works as intended.
BUG=None
TEST=Compiled Veyron_Pinky.
Change-Id: Id25545cab88f29200c7672ef02c7804f0ac26399
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5b517fc46b030a6e50ef2f5e4d4a449b98ce16c6
Original-Change-Id: I8a60bd30e8b27a22bb3da68ca84daea99424dee9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219680
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9222
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
mosys will use this field to identify system
BRANCH=none
BUG=chromium:359155
TEST=build ok, use dmidecode to check whether data is
written correctly
Change-Id: I461215c012b6ad712b3f813a3928e90a23bf54f1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7adbdab761cd7b4bda0a43e7b1c4070de26f150a
Original-Change-Id: Icfbd4c61fc49a9cb3d3ecd2b622339957963150c
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217400
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9230
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of relying on the CBFS header's romsize field use
the CONFIG_ROM_SIZE Kconfig variable. That value is what is
used to create the rom file as it is. Therefore, just remove
the dependency.
Change-Id: If855d7378df20080061e27e4988e96aee233d1e0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9130
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The serialized format of CBFS is separate from the APIs
used to traverse and read from CBFS. Separate those out
so they can be consumed as a standalone header.
Change-Id: I09f71d9c474ee9f23a62b0062ffa777963d1a4dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9125
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Use the run_romstage() API to prevent code duplication
and more maintenance for any API changes or features.
Change-Id: I4122b813cccf4dc0703f256e1245deeeb90deeb9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9172
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This replicates commit 3f7ad7b216 and
commit 823edda98e for mips.
Change-Id: Id97e1fefa20cfa3bcb2cf0336b5a4ff7d9fe813b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9166
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The console interface changed in upstream, and the
driver didn't reflect that yet.
This wasn't obvious because the driver wasn't compiled
at all.
Change-Id: Id18391e62e7ebd8f5fc929838ce27bf414e364f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9165
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The mips Makefile was inherited from x86 and so included lots
of stuff that is necessary on x86 but nowhere else.
That cruft is now gone.
It also adopts the non-x86 approach of handling linker scripts,
hardcoding an include to ldoptions there, instead of manual
concatenation (of just one file plus options).
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ibf0c7096f9425572d8f83837aa6a253fd91e212c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9163
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Introduce generic-$(type)-ccopts and $(class)-generic-ccopts
to declare compiler flags that apply to all files of a certain
type or of a certain class. Then use them.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I655688e82a0cc5bad89b6f55dc217b9f66b64604
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9114
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I192fa50989b586fd8e967d4c22db56ac9de7a30e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9108
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
It points to a binary.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I164d7f717a9523d187e2c215083e176b59fd5acc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9113
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ia22c9fcbf8c629d0eb3f1356f80c4565f117d8b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9110
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have .lb, .lds, and .ld in the tree. Go for .ld everywhere.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I3126af608afe4937ec4551a78df5a7824e09b04b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I362e2f6a978de23e72e6fc9c83bc99457cd76d9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9112
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I8a5dc66d8c0dc4ccdb6dc3d66b8cdbf50dc976ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9111
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the approrpiate car* empty implementations as well as types
included within the rest of coreboot to start building correctly.
Change-Id: Ifaf10281f9a9e28f518f4694630cbffa3f8d187d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9150
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Since PSCI dynamically determines which EL to transition
to based on SCR_EL3 there's no need to provide that
information.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel with MP.
Change-Id: Ia59bc8116ec4ae9bde2e6cad1861f76c14f7d495
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8bc5f7c8a114568ede98478c2fbea2f8b7d97f0c
Original-Change-Id: I8783b6315dca01464e14c9d2b20d009cf0beeb67
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218924
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PSCI functionality initially includes CPU_ON and CPU_OFF
functions. Upon entering secmon if the parameters are non-NULL
then a PSCI CPU_ON action is done for the current CPU.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted kernel with PSCI support. Brought up all CPUs in kernel
using PSCI. Turned CPUs on and off.
Change-Id: I256fa45a1c9889ff9d7990eb1898df1ec241c117
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 689ba03e313e7e52e9b74aa774897b55cbd52748
Original-Change-Id: I943826b7dbcc8e3f6c8c4b66344af8fac12ba94e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218923
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9097
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
If an exception is taken that the secmon won't return
to, there needs to be way to reset that cpu's state
w.r.t. stack usage. Therefore, provide secmon_trampoline
which will reinitialize the exception stack and SP_EL0
and start executing with SP_EL0 like the initial state
of the secmon entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also tested when PSCI
is employed in the kernel.
Change-Id: Ie9f5bbe715dcbcf8b67ea40f9a3a5088ac7aa2ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1f546ee3e9eca93baaa1ae0437351205bf548a5
Original-Change-Id: Ia3da75e1fa0251c8ea30eb0b0523c8a51c03b917
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218922
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9096
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Two things:
1. Not returning once setting the return state.
2. mempcy(x, y, ARRAY_SIZE(x)) is not memcpy(x, y, sizeof(x))
With these 2 changes arguments and results are being processed
correctly.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and brought up SMP using PSCI.
Change-Id: If76a207e1a434a4c08faaa535f069d7386481e9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d540afd4e6ea2b34cf3632ad2c683fcaa063c8
Original-Change-Id: I656b9c11e3bc07cc1664789a600eb88afd639f93
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218847
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9094
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to process PSCI commands SMC instructions need to be
serviced. Provide a simple way for users of SMC to register their
handlers by function.
The SMC layer hooks into the exception processing, however it only
processes AARCH64 SMC calls. All others are ignored.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Added nop smc call to depthcharge. SMC handled and continue booting
to kernel.
Change-Id: I378f13c29220ff9f37040f094bf9cfb69259af0c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76d2febc50397348b68d38532b8f37e2b3cf6a30
Original-Change-Id: Ieaa29fa883b9f9d55fc62ba92a1d45452296efa4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218846
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9092
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The exception vectors were not reinitialized in secmon yet.
Add that as well as the split BSP vs non-BSP path. In doing
so bring in the cpu.c semantics for determining bsp at runtime.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also noted only one CPU
printing messages.
Change-Id: I26a7f9446f4422d2203b1d520e69f8dee9450b59
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67f79c61c902ee614f029047255b4be35112cd32
Original-Change-Id: Ide66f13c24f5798d5983c481ce616ae2800d558c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218845
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9091
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's helpful to differentiate the startup paths for
the BSP and the non-BSP. Therefore have c_entry
be an 2 element array of function pointers. The
non-BSP paths have an entry point one instruction after
stage/module entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: I40bb40462906f1b1eaf2db8584985095e8ac0bae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce10f954041b3fd581ad8a3d82dee567b68637fe
Original-Change-Id: Ia573b1095dca5f69e371bf1ddf6b6df72fa3b52e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218844
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9090
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The cpu.c contains some helpful construts as well as ramstage
devicetree handling. Split the 2 pieces so that cpu.c can be
reused in secmon.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted.
Change-Id: Iec0f8462411897a255f7aa289191ce6761e08bb0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f30f1186950424b65df6858965a09ca51637e4f
Original-Change-Id: Ie87bd35bf1ccd777331250dcdaae07dab82d3d18
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218842
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9089
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to build upon the arm64 exception handlers need
to be registered. This provides very basic support to
register a handler for a specific exception vector.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel.
Change-Id: If046f0736765a2efeb23201c1d2d1f7f7db47dd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a82e5e8d5900ebef16abdb68701be6beeb9ca13a
Original-Change-Id: I0f68a48101ff48d582f5422871b9e7e5164357e4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218650
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9088
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was a hacky and one-off spin table support in tegra132.
Make this support generic for all arm64 chips.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Ran with and without secure monitor booting smp into the kernel.
Change-Id: I3425ab0c30983d4c74d0aa465dda38bb2c91c83b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 024dc3f3e5262433a56ed14934db837b5feb1748
Original-Change-Id: If12083a9afc3b2be663d36cfeed10f9b74bae3c8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218654
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9084
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's helpful to know if the current running CPU
is the BSP. Therefore, provide that semantic.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: I18cb8ab5149c3337e22b1f6046b1af266be7e47c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b390dc70b658c207cd3b64408713ec4cddab3172
Original-Change-Id: I3d5518d1f6d6a78b14f25bb7ef79727605064561
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218653
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9083
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide richer semantics for running code
on all CPUs add an all-but-self construct.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: If8dd28ff7f34d93592ab2025a65a2fd665e4e608
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a4622f63a065f620f0c92ef92eeb2aa5c2b441d
Original-Change-Id: Id18dc0423bcb0016ed36ace659b3f858e824c46c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218652
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9082
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Secure monitor runs at EL3 and is responsible for jumping to the payload at
specified EL and also to manage features like PSCI.
Adding basic implementation of secure monitor as a rmodule. Currently, it just
jumps to the the payload at current EL. Support for switching el and PSCI will
be added as separate patches.
CQ-DEPEND=CL:218300
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles succesfully and secure monitor loads and runs payload on ryu
Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34
Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214371
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
stage_entry is the best place to enter for secmon, since it sets up all the
stacks right. The only need we need to take care is losing out on the parameter
passed to secmon. This patch adds an entry point for secmon rmodule and moves
the argument from x0 to x25, which is restored just before the jump to c_entry
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: I9638e9716b3bd5bff272e88fe9d965528d71e394
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffedb03208bafab6d5886db0259ec205dd20588f
Original-Change-Id: I74a7a609fbc08692d68708abe132cd219c89b456
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217570
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9079
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Andrey Petrov