Checking for empty MTRR_DEF_TYPE_MSR as a proxy for proper CPU reset
is common across multiple platforms. Therefore place it in a common
location.
Change-Id: I81d82fb9fe27cd9de6085251fe1a5685cdd651fc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Integrated graphics id 0x3ea1 reported as unknown in bootblock stage,
make it correct.
BUG=N/A
TEST=Boot up into sarien platform and check with serial log, it shows
IGD: device id 3ea1 (rev 02) is Whiskeylake ULT GT1.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I2c4c697b108be7fa74736514ca71469a1ca29c22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Add SMBIOS type 16 table for physical memory array, there's two item had
been left over.ECC and max capacity, as of now we set it to fixed value
as all the platform support by Intel common code don't support ECC
memory and so far the biggest capacity is 32GB.
BUG=b:129485635
TEST=Boot up with Sarien platform and check with dmidecode, the
following is the result:
Handle 0x000D, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: If9c5831956ef273c84d831a2b1572b3442eed961
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32286
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures to follow Intel SDM Vol 3B Sec 18.7.3 to
calculate nominal TSC frequency.
As per SDM recommendation:
For any processor in which CPUID.15H is enumerated and
MSR_PLATFORM_INFO[15:8] (which gives the scalable bus frequency) is
available, a more accurate frequency can be obtained by using CPUID.15H
This patch also adds header file to capture Intel processor model number.
BUG=b:129839774
TEST=Boot ICL platform and calculate TSC frequency using below methods
1. TSC freq calculated based on MSR 0xCE
tsc: Detected 1600.000 MHz processor
2. TSC freq calculated based on CPUID 0x15
tsc: Detected 1612.800 MHz TSC
Method 2 actually reduce ~25ms of boot performance time.
Note: Method 2 is recommended from gen 6 processor onwards.
Change-Id: I9ff4b9159a94e61b7e634bd6095f7cc6d7df87c7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
This patch removes multiple enable/disable function definitions and
make use of single function with argument to know feature status
(enable/disable).
Change-Id: I502cd2497b07e9de062df453ecbb9c11df692f5a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32282
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Cannon Lake and family require that FSP-M component should be
XIP. This change selects FSP_M_XIP so that the right arguments are
passed into cbfstool when adding this component.
BUG=b:130306520
TEST=Verified that hatch boots fine to OS.
Change-Id: Ifd8a829ebdc7681c81ece4540aa38cdcea7b6fac
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
XIP_ROM_SIZE Kconfig option isn't used on Cannon Lake and
family. Thus, this change selects NO_FIXED_XIP_ROM_SIZE to indicate to
build system so that romstage can be placed in less rigid manner.
BUG=b:129802811
Change-Id: I5f3786396246c89b1039ba1b6b332a32e6a0345d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This implementation corrects the GPE DWx mapping for GPIO groups.
The assignments is done in GPIO MISCFG register for all GPIO communities.
And configures the which GPIO communities get register as Tier1.
BUG=b:121212459
TEST: Verified the GPIO MISCFG is getting set as per updated map.
Change-Id: I451997367025a6dc9e5931bd649524e935ad6aca
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32175
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If `gms == ARRAY_SIZE(gms_size_map)`, then we will have an
out of bounds read. Fix the check to exclude this case.
This was partially fixed in 04f68c1 (baytrail: fix range
check).
Found-by: Coverity Scan, CID 1229677 (OVERRUN)
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I8c8cd59df49beea066b46cde3cf00237816aff33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The SkipExtGfxScan option is defined in the device tree, but doesn`t
update the value in the UPD. It uses the default value - 0. This
means that the FSP will scan all external graphics devices, in spite
of the configuration in devicetree.cb for a specific board.
Patch updates SkipExtGfxScan options in UPD from devicetree.cb.
This change affects all boards with skl/kbl processor.
Change-Id: Ie88a41bdf31f7c3e88df6c70c82a1cbf866372c4
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Remove ITSS IPC restore for cannonlake, as it does not take effect
since the ITSS PCR registers are locked post FSP-S.
Change-Id: Ie39e0d43644cb7b03b6c3432f0965f1d76d1bc37
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
FSP options list (for each PEG port):
- PegXEnable,
- PegXMaxLinkWidth,
- PegXMaxLinkSpeed,
- PegXPowerDownUnusedLanes,
- PegXGen3EqPh2Enable,
- PegXGen3EqPh3Method.
Add PegMaxLinkWidth to chip.h. This option overrides the number of
active lines from the devicetree.cb for each enabled PEG port (for
example for boards that use x4 instead of x16 lines in PEG0). If the
PegMaxLinkWidth is not defined, the port uses the maximum possible
number of lines.
To enable or disable the corresponding PEG root port you need to add
to the devicetree.cb:
device pci 01.0 on end # enable PEG0 root port
device pci 01.1 off end # do not configure PEG1
If PEG port is not defined in the devicetree, it will be disabled in
FSP.
It has been tested on ASRock H110M-DVS motherboard (Skylake i5-6600
CPU).
Change-Id: I23708f7060edf08739adf61fe61a419329907563
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32045
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The InternalGfx option in devicetree.cb is not used to enable iGPU.
The patch removes this option from chip.h and mb/*/devicetree.cb
files for all boards with skl/kbl processor.
Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch includes the following changes:
1. Sets FSP options in romstage_fsp20.c to select primary GPU.
List of options:
- InternalGfx,
- PrimaryDisplay.
2. iGPU will be initialized if the corresponding PCI device is defined
in the device tree as:
device pci 02.0 on end
In this case, it is not necessary to set the InternalGfx option to
enable this device
3. Primary_iGFX is used as the default value for all skl/kbl boards
(since the PrimaryDisplay option isn`t defined in the devicetree.cb)
Change-Id: Ie3f9362676105e41c69139a094dbb9e8b865689f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Serial IRQ was configured in quiet mode, but not enabled.
Enable serial IRQ and use 'enum seriirq_mode' as a devicetree
option.
Function sc_enable_serial_irqs() is added to enabled serial IRQs.
enable_serirq_quiet_mode() is renamed to
sc_set_serial_irqs_mode(). This function use the 'serirq_mode' to
set the mode. The call to this function is moved from finalize to init
having serial IRQs enable in early stage.
Serial IRQs must be enabled in continuous mode for at least one frame
before switching into quiet mode.
BUG=N/A
TEST=Portwell PQ7-M107
Change-Id: I7844cad69dc0563fa6109d779d0afb7c2edd7245
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
This patch enables CONFIG_VBOOT_OPROM_MATTERS in a few more cases where
I think(?) it should be. Haswell, Broadwell and Baytrail Chromebooks
have this enabled in their old depthcharge firmware branches -- we
presumably just forgot to move it over when vboot2 migrated the option
to coreboot. Braswell didn't, but it seems like this requirement was
added when it was migrated to FSP 1.1...? (Not very sure about that one,
but it does call load_vbt() right now which executes things based on
display_init_required().) Additionally, it seems to make sense to enable
it whenever the user explicitly selects VGA_ROM_RUN in menuconfig (like
one of the Intel defconfigs does).
Once we have all this, one could take a step back and ask whether this
option still makes sense at all anymore. It's enabled for almost all
devices (that work with vboot at all), it will presumably be enabled for
all future devices, and it seems that most devices that don't enable it
use libgfxinit, which as far as I can tell isn't gated on
display_init_required() but probably should be. Realistically, whatever
kind of display init a board needs to do (native or option ROM), it's
probably expensive enough that it's worth skipping on a normal mode
vboot boot, and we'd want to have this enabled by default on everything
except boards that actually don't have a display. So maybe we should
flip it around to CONFIG_VBOOT_OPROM_DOESNT_MATTER, but doing that would
probably lead to nobody ever selecting it at all.
Not sure what the best solution there is yet, but I think this patch
at least moves things in the more correct direction.
Change-Id: Id96a88296ddb9cfbb58ea67d93e1638d95570e2c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
FSP has a UPD to unlock all GPIO pads. This parameter is disabled by
default. Add a chip parameter so that GPIO pads can be unlocked on mainboard
level in devicetree and therefore this feature can be used if needed.
BUG=b:128686027
Change-Id: Iad9e8a209dc3f8ca0c994e8c1da329918409a1d4
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Ignore integrated GBE controller LTR setting to make it wake up from
s0ix with 10/100M cable attached.
BUG=b:122435844
TEST= Test on sarien platorm, after the changes sytem can wake by WOL,
and also checked SLP_S0 residency can increase with 10/100M cable
and battery connected.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Iec7dd197b8a456751f8e4dcb19e3e153f5888613
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch ports CB:30717 changes from CNL to ICL.
This structure is declared as a static CAR_GLOBAL in the common
PMC library code and in the SOC specific code. Remove the SOC
specific version and instead get the chipset_power_state pointer
from the PMC library.
This fixes events that were recorded in chipset_power_state at
boot but were reading as all zero when it was time to parse the
structure when logging events to flash.
Change-Id: I1152d0e882e1acf475072d1553b74f9161e2f485
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32095
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The policy to identify and log the XHCI wake events is similar between
skylake and apollolake. Hence move the similar parts to a common
location.
BUG=b:123429132
BRANCH=None
TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up
events due to USB are logged into the event logs.
6 | 2019-03-21 09:22:18 | S0ix Enter
7 | 2019-03-21 09:22:22 | S0ix Exit
8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9
9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13
10 | 2019-03-21 09:23:20 | ACPI Enter | S3
11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9
12 | 2019-03-21 09:23:30 | ACPI Wake | S3
13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13
Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The following is the FSP logic: as long as the Cpu Ratio input in
coreboot is different with CpuStrapSet, system will force to follow
input from coreboot. But CpuStrapsetting is floating, it will be 0
from the first cold boot before memory training and set to 0x1c (or
max CPU ratio for the installed CPU) after first memory training.
The previous fix was attempting to ensure settings were cleared
when FSP was called in recovery mode, but only when coming from S5
which caused issues if recovery mode is requested by the OS and
is only followed by a warm reset.
BUG=b:129412691
TEST=Boot up sarien platform and force recovery, check there's no reset
in the path of recovery.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I959188be46343bc6f2cb3cc149097b4d449802aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32089
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For systems that integrate GbE controllers, following parameters should be configured:
SlpS0WithGbeSupport: enable PchPmSlpS0VmRuntimeControl: disable,
PchPmSlpS0Vm070VSupport: disable, PchPmSlpS0Vm075VSupport: disable.
TEST=boot on any GbE supported WHL platform
Change-Id: I02aaf0b77b8fc1555a3a424c02acfada21707d0e
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
After raminit completes, do a read-modify-write test
just below CBMEM top address. If test fails, die().
Change-Id: I33d4153a5ce0908b8889517394afb46f1ca28f92
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This option has been relocated to depthcharge:
https://crrev.com/c/1524806
BUG=b:124141368, b:124192753
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
CQ-DEPEND=CL:1524806
BRANCH=none
Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In my case, on UPsquared board with Celeron N3350 CPU,
I don't have UART2 but UART0.
Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The prev_sleep_state value was showing 5 even after warm reboot, once the
SUS_PWR_FLR bit is being set. This bit was not being cleared.
Hence clearing the PMCON status bits.
BUG=b:128482282
BRANCH=None
TEST=In cbmem logs, check for value of “prev_sleep_state” using command
cbmem –c | grep “prev_sleep_state”
For cold reboot, "prev_sleep_state 5"
For warm reboot, "prev_sleep_state 0"
Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch ensures to make use of common MP Init Kconfig to
choose desire method to peform MP initialization for platform.
Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
mainboard users can select correct MP Init Kconfig in order to
perform MP initialization.
1. Native coreboot MP Init.
2. FSP to do MP Init.
3. FSP to make use of coreboot MP service PPI to perform MP Initialization
Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change enables user to shutdown the system by shortly pressing
power button (<10sec) before OS is loaded. Main use case is shutdown
from recovery/broken screen.
BUG=N/A
TEST=Boot up into recovery screen on Sarien platform, press power button
once, and system should shutdown immediatelly.
Change-Id: I7655daf65ff058df7d9bad4567f74b4f4007acb4
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all
DDI ports are enabled and hence configures the HPD and CLK for DDI ports.
This patch initializes only the required UPDs to enable display ports.
BUG=b:123907904
TEST=DP devices working correctly.
Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch removes all local definitions of sub_system functions and make
use of common generic pci_dev_set_subsystem() from PCI bridge and Cardbus
devices as well.
Change-Id: I5fbed39ed448baf11f0e0786ce0ee94741d57237
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch removes local definitions of sub_system function and make use
of common function pci_dev_set_subsystem().
Change-Id: I91982597fdf586ab514bec3d8e4d09f2565fe56d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Furquan Shaikh <furquan@google.com>
Drop 'include <string.h>' when it is not used and
add it when it is missing.
Also extra lines removed, or added just before local includes.
Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Commit 41483c9 (soc/intel/cannonlake: Add required FSP UPD changes for
CML) changed the enum values for PCH_SERIAL_IO_MODE so that 0 is
invalid and valid values start from 1. However, get_param_value was
not updated to correctly subtract 1 before returning any value. This
change adds a macro PCH_SERIAL_IO_INDEX to apply the subtract 1
operation on any value that get_param_value needs to return.
BUG=b:128946016
TEST=Verified that hatch boots successfully.
Change-Id: I4e32fcd1efe4a535251f0ec58662a2dc5f70e8b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Default reserved value of used for SCI IRQ.
Configure SCIS field to use IRQ 9.
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I09aca433528b6f64ad3ff3753ae8392c0d89cdc0
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
The mmio resouces IOAPIC and ROM area not reserved.
Reserve IOAPIC and ROM resources.
BUG=N/A
TEST=Intel CherryHill CRB booting Embedded Linux
Change-Id: I917c30892b46ac1d964e7bab339082d17a1e706d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
coreboot have an option to use legacy UART or LPSS UART. FSP will use the
UART initialized by coreboot and we can choose an option to skip Uart
initialization by FSP.
For this, we need to pass correct debug interface flag to FSP through
which FSP will know which UART port to use. If we don't pass correct
interface information, FSP may try to dump logs on that port and it may
slow down the system.
BUG=none
BRANCH=none
TEST=Compile and boot with coreboot. Check FSP and coreboot logs are
coming on serial port.
Change-Id: I1ebb20c93e2c15ec085538509099de72bc9dd62c
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update the Kconfig option for disabling ESPI SMI source
to disable it entirely, not just when ACPI mode is disabled.
For the situations where this is needed (just the sarien
board) it is better to completely stop the EC from sending
any SMI events as no actions are taken.
Change-Id: Id94481bb2f0cfc948f350be45d360bfe40ddf018
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds required FSP UPD changes for CometLake SoC.
Also this patch tries to create common parse logic for CometLake as
well as cannonlake SOC.
We parse device tree parameters for PCI devices and fill values in FSP
UPDs. We fill UPDs based on pci device config as well as SerialIoDev
config of devicetree.
For PCI devices, if PCI device is disabled from devicetree, we'll assign
disable value to FSP UPD.
In case devicetree doesn't fill this parameter or value is invalid in
SerialIoDev config, default mode will be set to PCI.
In case of valid value, we'll fill the same value into FSP UPD.
BUG=none
BRANCH=none
TEST=check if CML board boots and proper UPD values are filled.
Change-Id: Ib92b660409ab01d70358042b2ed29b8bf9cab26d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Move ChipsetFspReturnPoint() to drivers/intel/fsp1_0.
Allows to have a common entry after FSP-M.
Change-Id: I064ae67041c521ee92877cff30c814fce7b08e1f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
CNL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
BUG=b:128482282
TEST=Verified that prev_sleep_state is reported correctly when booting
from S5.
Change-Id: I75780a004ded8f282ffb3feb0cdc76233ebfd4f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31908
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on hatch.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:127609572
Change-Id: I9b2d4c33fc378b9a24b111971ec2bfdb5f8d57d0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31850
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the
initialization of the programmable interrupt controller (PIC) for
faultless operation. The PIC mode is need for USB support (e.g.
keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM).
Therefore add setup_lapic() to configure the APIC.
Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds support for logging wake source information in gsmi
callbacks. With this change, all the elog logging infrastructure can
be used for S0ix as well as S3 on cannonlake.
BUG=b:124131938
BRANCH=none
TEST=Verified that the wake events are logged during the S0ix resume:
6 | 2019-03-04 17:03:13 | S0ix Enter
7 | 2019-03-04 17:03:17 | S0ix Exit
8 | 2019-03-04 17:03:17 | Wake Source | RTC Alarm | 0
9 | 2019-03-04 17:03:55 | S0ix Enter
10 | 2019-03-04 17:03:56 | S0ix Exit
11 | 2019-03-04 17:03:56 | Wake Source | GPE # | 21
12 | 2019-03-04 17:04:36 | S0ix Enter
13 | 2019-03-04 17:04:45 | S0ix Exit
14 | 2019-03-04 17:04:45 | Wake Source | GPE # | 112
15 | 2019-03-04 17:05:01 | S0ix Enter
16 | 2019-03-04 17:05:09 | S0ix Exit
17 | 2019-03-04 17:05:09 | Wake Source | Power Button | 0
Change-Id: Id627843e22c2524dfa94395b780cf2134f386137
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
BUG=b:124131938
BRANCH=none
TEST=none
Change-Id: If24c3feeb77f4fb692ef0bf38d537b2b54de3c36
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
CPU PM TIMER EMULATION logic will help UEFI payload to execute rather
wait for time tick in absence of TCO and ACPI PM timer after FSP-S.
BUG=N/A
TEST=Able to build and boot with tianocore payload.
Change-Id: I7fd11e728b7a14f41f08bc39bcd92a42a8aa6cff
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds support H110 chipset (Sunrise Point) for Skylake and
Kaby Lake processor families by adding the corresponding IDs. It has
been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU).
Change-Id: I85ba65ac860687b0f9fd781938e5cac21a1b668d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31602
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support
1) Intel(R) Xeon(R) E3 - 1200/1500 v5/6th Gen Intel(R) Core(TM) Host
Bridge/DRAM Registers - 191F;
2) HD Graphics 530 Skylake GT2 - Intel integrated graphics processor
https://en.wikichip.org/wiki/intel/hd_graphics/530.
This is required to run coreboot on the Intel Core i5-6600 (Skylake)
desktop processor. It has been tested on ASRock H110M-DVS motherboard.
Change-Id: If47e9ac32813a9f73d3a23f44536f60d1003971d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31601
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel Braswell P-UNIT is missing in pci_devs.h
Add PUNIT device, function and device ID
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I80c87c8964b3ba830571e0c03c424b67729a0c1a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31711
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This IS_ENABLED(XXX) line should've clearly been IS_ENABLED(CONFIG_XXX).
This patch can fix that. However, I don't have (and don't plan to
acquire) an affected system to test, so approve at your own risk (or
let me know if I should just remove that check instead).
Change-Id: I79a0fca65853798ee45c3779b437864ba3cf2b1e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Intel Braswell SoC contains SMBus controller but no support
is available for this controller.
This controller is compatible with the Intel SMBus support in the
southbridge common directory.
To be able using smbus support from the Intel common directory
the smbus.c is moved outside SOUTHBRIDGE_INTEL_COMMON
dependency block.
Use SOUTHBRIDGE_INTEL_COMMON_SMBUS to include support.
BUG=N/A
TEST= Facebook FBG-1710 LCD panel
Change-Id: Ie3d4f657558a1aed21b083ef5cad08ea96e629c3
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes indirect includes that would break with followup work.
Change-Id: I37ca01b904a0b422a4d09475377e755e167a6ab3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
These resolved to <device/oprom/include/io.h> which
included <arch/io.h> that we really wanted.
Change-Id: I9aa0bdf34cd1d53e20b4494c7986f0878f4fd840
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31693
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move common definitions for PCH H and LP to a common header.
Change-Id: If47692ecb05134db1ee6c0fb10125d6a1b67f127
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31621
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the ISH ACPI device so we can hang fields off of a _DSD table.
Since this is also a PCI device that has run time probing, we can always
emit the ACPI device and let the device tree turn the device on or off.
BRANCH=none
BUG=b:122722008
TEST=verify that _DSD table gets publish under ISH device in kernel ACPI
tables. Also verified that device is still turned off if device tree for
ISH is off.
Change-Id: Ic0231f1ac637fea0e251eb3ac84f0fd8d64c12b2
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31681
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The following remarks show up during cannonlake based platform coreboot
build:
dsdt.asl 55: Offset (0x00),
Remark 2158 - ^ Unnecessary/redundant use of Offset operator
dsdt.asl 136: Offset (0xa8),
Remark 2158 - ^ Unnecessary/redundant use of Offset operator
Address those two remarks in coreboot.
BUG=N/A
TEST=Build coreboot and check build log to see no more remark.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Iad660347b32d90ac1176654820375e30a21b5ffe
Reviewed-on: https://review.coreboot.org/c/31666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Local APIC was not configured.
Add setup_lapic() to configure the APIC.
BUG=N/A
TEST= Ubuntu 4.15.0 reports correct local APIC information
on Intel CherryHill CRB
Change-Id: Ic1da5b1bf235f34b957142e86c70a9dbfa3ded1d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
HDA support did not configure the codecs correclty.
Use Intel common block support to configure the codecs.
To use common Intel HDA support file hda.c file has been
removed and Braswell HDA device ID is added to list of
supported PCI devices in intel/common/block/hda/hda.c.
CONFIG_SOC_INTEL_COMMON_BLOCK and
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA are enabled
to include hda.c in build.
When codec table is available at board level
SOC_INTEL_COMMON_BLOCK_HDA_VERB must be enabled
and a codec table must be supplied.
BUG=N/A
TEST=Facebook FBG-1701 ALC298 configuration
Change-Id: I5c23ec311e5b5a6dfd6f031aa19617407fe8ed63
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Since ACPI v2.c, this field is access_size.
Currently, coreboot is using ACPI v3,so we can drop '.resv' field.
Change-Id: I7b3b930861669bb05cdc8e81f6502476a0568fe0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We had two ways to configure the serial IRQ mode. One time in the
devicetree for FSP and one time through Kconfig for coreboot. We'll
use `enum serirq_mode` from soc/intel/common/ as a devicetree option
instead. As the default is `quiet mode` here and that is the most
common mode, this saves us a lot of lines.
In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting
settings in devicetree and Kconfig. We'll maintain the `continuous`
selection, although it might be that coreboot overrode this earlier
on the kblrvps.
Note: A lot of Google boards have serial IRQ enabled, while the pin
seems to be unconnected?
Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
INT_MODEL defined in ACPI 1.0 and renamed to reserved since V 2.0.
The value for this field is zero but 1 is allowed to maintain
compatibility with ACPI 1.0.
So set this value to zero as we are using greater version than ACPI 1.0.
Change-Id: I910ead4e5618c958a7989f4c309a3a4bb938e31a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29986
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Calculation of memory reserved by FSP is incorrect.
Use CBMEM_ID_FSP_RESERVED_MEMORY to determine the memory area
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: If68bda39ba2b1f3be4ed4bc872710be7bbd4948b
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
The level/edge mode of PIRQ is not configured and i8259 PIC not initialized.
Add calls to:
- i8259_configure_irq_trigger()
- setup_i8259()
- write_pci_config_irqs()
to correct the configuration of interrupts.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: I128cb35dd0e348a9cd9fb162651e0aa2b7e4a3ef
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
IRQ10 and 11 are not available as _PRS in all LNKx ResourceTemplates.
These interrupt numbers are added to all LNKx.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ie7a263d7d50f7f85e6195777c1429dcc27a15604
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29287
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change ac8c60e (soc/intel/cannonlake: Disable ACPI mode as part of
pmc_soc_init) moved disabling of ACPI mode to pmc_soc_init to keep it
more aligned with the behavior on other Intel SoCs. However, as the
PMC device is hidden, it never gets enumerated and so init function
does not get called for it. This change moves the call to disable ACPI
mode to exit of BS_DEV_INIT instead.
BUG=b:126016602
TEST=Verified that:
1. pmc_set_acpi_mode is actually getting called.
2. EC panic event gets logged to eventlog correctly.
Change-Id: Ie7025e322fa0abc21367a520184a4c7741eba1e6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31633
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix cases of using ENV_SMM where __SIMPLE_DEVICE__
should be used instead.
Change-Id: I385c82767a87ff7a47466a200488fae9fc8b863d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
For fast CBMEM console use minimum BIOS_DEBUG level.
For other consoles, Kconfig and/or nvram settings
apply.
Change-Id: Iff56a0a3182f258200cac80e013957d598cc2130
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
SD controller in CNL-PCH provides a ability to configure the behavior of
SD_VDD1_PWR_EN# as an active high or low signal. FSP provides an UPD
"SdCardPowerEnableActiveHigh" to control the same.
However, for platforms using SD_VDD1_PWR_EN# as active high, the SDXC
card connector is always powered and may impact system power. This is because
SD_VDD1_PWR_EN# does not de-assert during SDXC D3 or when SD card is not
inserted.
Workaround is to change the pad ownership of SD_VDD1_PWR_EN to GPIO and
force the TX buffer to low in _PS3. And restore the pad mode to native
function in _PS0.
Hence add a Kconfig option to update the UPD, which the board can select
based on how the SD_VDD1_PWR_EN is implemented on it. And, the workaround
gets applied based on this config.
BUG=b:123350329
Change-Id: Iee262d7ecdf8c31362aec3d95dd9b3e8359e0c25
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31445
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC initialization on Cannon Lake happens earlier in the boot sequence
than other SoCs because FSP-Silicon init hides PMC from PCI bus. As
ACPI disabling was done as part of PMC init, it was being called
earlier than what other SoCs do. This resulted in a different order of
events for some drivers e.g. ChromeOS EC. In case of ChromeOS EC, it
ended up clearing EC events (which happens as part of ACPI disabling
in SMM) before logging any events of interest that happen during
mainboard initialization.
This change moves the call to disable ACPI to pmc_soc_init just like
other SoCs to keep the order of events more aligned.
BUG=b:126016602
TEST=Verified that EC panic event gets logged to eventlog correctly.
Change-Id: Ib73883424a8dfd315893ca712ca86c7c08cee551
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Introduce a measured boot mode into vboot.
* Add hook for stage measurements in prog_loader and cbfs.
* Implement and hook-up CRTM in vboot and check for suspend.
Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a function in gpio ASL library to set pad mode.
BUG=b:123350329
Change-Id: I6c683f27ddffc3132001706d1694c71bb5664577
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
For CFL and WHL, Microcode is being loaded from FIT. Both
supports the PRMRR/SGX feature. If This is supported the FIT
microcode load will set the msr (0x08b) with the Patch id one
less than the id in the microcode binary. This results in
Microcode getting reloaded again in bootblock and ramstage.
Avoid the microcode reload by checking for PRMRR support.
CFL and WHL CPU die are based on KBL CPU so we need to have
this check, where CNL CPU die is not based on KBL CPU so
skip this check for CNL.
BUG=b:124126405
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I3311a7413d27044f9c819179e5b0cb9a67b46955
Reviewed-on: https://review.coreboot.org/c/31492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Variants of Hatch need to accommodate single channel DDR. Also,
removing const modifier as we'll need to set these fields
incrementally now. For the single channel configuration, we set
MemorySpdPtr10 to 0. For the dual channel configuration, we set
MemorySpdPtr10 to MemorySpdPtr00.
BUG=b:123062346, b:122959294
BRANCH=None
TEST=Boot into current boards and ensure that we have 2 channels as expected
Change-Id: Ice22b103664187834e255d1359bfd9b51993b5b6
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31262
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch feeds PsysPmax setting to FSP through UPD and adds a
psys_pmax member in chip information so that we can set PsysPmax
through DT. The PsysPmax needs to be set correctly mapping to maximum
system power. Otherwise, system performance would be limited due to
the default PsysPmax setting in FSP is only 21W.
BUG=None
BRANCH=None
TEST=Set psys_pmax to an example value eg 101 in DT && put debug code
in FSP to print the PsysPmax value before sending to Pcode, ensure
the setting is correctly programmed.
Change-Id: Ia88ea17bc661a388c5b9bc3e59abc27c9f262977
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/31505
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the _DSM method 5 and 6 for entering and exiting S0ix.
The _DSM method gets injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ia908969decf7cf12f505becb4f4a4a9caa7ed6db
Reviewed-on: https://review.coreboot.org/c/31101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
New whiskeylake v-0 stepping have changed the graphics device id from
0x3EA0 to 0x3EA1 for celeron, so declare that in common code. Also the
CPUID was changed from 806EB to 806EC, include that as well.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ief5213a96507124b90f8dd2eeea2f6bf43843dc6
Reviewed-on: https://review.coreboot.org/c/31433
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"mosys memory spd print all" returns incorrect memory ranks info.
This patch and 2 upcomming ones (one in FSP) will address the issue.
BUG=b:122329046
TEST=Boot to OS on Bobba variant of Octopus
BRANCH=octopus
Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/31235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use the common VMX implementation, and set IA32_FEATURE_CONTROL
lock bit per Kconfig *after* SGX is configured (as SGX also sets
bits on the IA32_FEATURE_CONTROL register).
As it is now correctly based on a Kconfig, the `VmxEnable` devicetree
setting vanishes.
Test: build/boot google/[chell,fizz], observe Virtualization enabled
under Windows 10 when VMX enabled and lock bit set.
Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29682
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace all instances, where 0 is used by the macro/define
`ACPI_FADT_LEGACY_FREE`.
Change-Id: I226b334620e0cdafc7639c7a76ea3a523ae53a74
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/31289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
According to doc 609208, bit 25 TOL_1V8 in GPP_F4 ~ GPP_F11 DW1
should be clear to prevent unexpected I2C behaviors.
BUG=b:124269499
TEST=boot on nami and check bit 25 TOL_1V8 is clear
Change-Id: I419ef3e89104ad3611e96bbe23a582504b45be0c
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/31368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Define VR settings configuration as per board design.
BUG=N/A
TEST=Build and boot up into sarien platform.
Change-Id: Ic9927943b1f8fab687659fd1d6da0e3988a3aba2
Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com>
Reviewed-on: https://review.coreboot.org/c/31405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Set SerialIoDebugUartNumber to CONFIG_UART_FOR_CONSOLE
SerialIoDebugUartNumber UPD use to select UART Number for Debug Purpose
The default value of SerialIoDebugUartNumber is 2 by default it selects UART 2
so it needs to be initialized as per board config
BUG=b:123702398
Change-Id: I91df4bb756e8ea86db112f1cc28687f48b2c0525
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31375
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I731bc1c9dec6cb5bbb228b7949a73848cb73eee3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30511
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: Idca207b4f05d1844ce6612dbecaad6faeb68725a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I72effa93e36156ad35b3e45db449d8d0d0cabf06
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Some similar calls to postcar_frame_add_mtrr() were added in the
meantime or were under review while postcar_frame_add_romcache()
was introduced.
Change-Id: Ia8771dc007c02328bd4784e6b50cada94abba198
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This board is EOL and has FSP2.0 support, so drop the older
version.
Change-Id: If5297e87c7a7422e1a129a2d8687fc86a5015a77
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The CAR setup is almost identical to the cpu/intel/non-evict
CAR setup, with the only difference that L2 cache needs to be
separately enabled. Currently this assumes that it is possible
to use a static Kconfig option to cover all CPU's requiring this.
Change-Id: Iae9b584bc0d32a56be2e6e2b2e893897eb448aa5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It is not mentioned in the FSP spec and doesn't seem to be implemented
for any other FSP than the Broadwell-DE one.
Change-Id: I87c758204f1aabf13f47de19fd87c6e1ed67258e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
FSP-S is currently configuring GPIOs that it should not. This results
in issues where mainboard devices don't behave as expected e.g. host
unable to receive TPM interrupts as the pad for the interrupt is
re-configured as something else.
Until FSP-S is fixed, this change adds a workaround by reconfiguring
GPIOs after FSP-S is run.
All mainboards need to call cnl_configure_pads instead of
gpio_configure_pads so that SoC code can maintain a reference to the
GPIO table and use that to re-configure GPIOs after FSP-S is run.
BUG=b:123721147
BRANCH=None
TEST=Verified that there are no TPM IRQ timeouts in boot log on hatch.
Change-Id: I7787aa8f185f633627bcedc7f23504bf4a5250b4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch performs below tasks
1. Create SOC_INTEL_COMMON_CANNONLAKE_BASE kconfig.
2. Allow required SoC to select this kconfig to extend CANNONLAKE
SoC support and add incremental changes.
3. Select correct SoC support for hatch, sarien, cflrvps
and whlrvp.
* Hatch is WHL SoC based board
* Sarien is WHL SoC based board
* CFLRVP U/8/11 are CFL SoC based board
* WHLRVP is based on WHL SoC
4. Add correct FSP blobs path for WHL SoC based designs.
Change-Id: I66b63361841f5a16615ddce4225c4f6182eabdb3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The allocation is not required before romstage,
so it can be just another CAR_GLOBAL instead of
polluting the linker script.
Change-Id: I0738a655f6cc924fbed92ea630f85406e3f58c0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31191
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default state of the HOSTSW_OWN register in the PCH is zero, which
configures GPIO pins for ACPI ownership. The board variabt GPIO tables
can request specific pins to be configured for GPIO driver ownership.
This change sets the HOSTSW_OWN ownership bit when requested and
explicitly clears the ownership bit if not requested.
BUG=b:120884290
BRANCH=none
TEST=Build coreboot on sarien. Verified UEFI to coreboot transition
boots successfully.
Change-Id: Ia82539dbbbc7cf5dfb9223902d563cafec1a73e5
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
By APL BIOS Spec, we must not do this on warm boots.
The TODO comment seems stale and copied over. So the actual
requirements for SGX are unknown and we add a guard for that
case.
Change-Id: I09b4a2fe22267d7318951aac20a3ea566403492e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31200
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The FSP has a parameter to enable or disable the VTD feature
(Intel's Virtualization Technology for Directed I/O). In current header
files for FSP-S (Apollo Lake and Gemini Lake) this parameter is set to
disabled per default. Therefore, if the FSP was not modified via BCT,
this feature is most likely disabled on all mainboards.
Add a chip parameter so that VTD can be enabled on mainboard level in
devicetree and therefore this feature can be activated if needed.
Change-Id: Ic0bfcf1719e1ccc678a932bf3d38c6dbce3556bc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31194
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GLK has a dedicated USB2 port that is used specifically for CNVi
BT. This requires that the ACPI tables define an additional USB 2 port
which results in _ADR for USB 3 ports being different for GLK than
APL.
This change splits the ports in xhci.asl into APL and GLK specific
ports.asl and selects the appropriate file based on
CONFIG_SOC_INTEL_GLK. It also adds support for returning HS09 for GLK
if ACPI name is requested for that port.
BUG=b:123670712
BRANCH=octopus
TEST=Verified that generated DSDT for octopus (GLK) includes HS09 and
for reef (APL) does not include HS09 definition.
Change-Id: I2d3d3690ec9ea1f6e35c38c3b3cbb82e961b7950
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31172
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
