On RW boot path psp_verstage call cbfs_map which calls chain of
_cbfs_alloc, cbfs_boot_lookup and cbfs_get_boot_device. Then
cbfs_get_boot_device initializes MCACHE which is used later.
However on RO boot path psp_verstage doesn't try to find anything in the
CBFS which results RO MCACHE not to be initialized. Add
cbfs_get_boot_device(true) to explicitly initialize MCACHE on recovery
boot.
BUG=b:177091575
BRANCH=none
TEST=build and boot jelboz
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6c4b522fef5a4affd215faa122bdf6b53190cf3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54711
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We were missing the stdint.h header, and the header was sorted
incorrectly in chip.h
BUG=non
TEST=build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I209d3c9c48e5b06b2a56759af51cf2858eb99f51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since the default for the corresponding UPD of the Picasso FSP is
DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE,
add a deviectree setting for each board that's using the Picasso SoC
code to not change the setting for the existing boards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This allows boards to specify which PSPP policy (basically a dynamic
trade-off between power consumption and PCIe link speed) should be used
and also makes sure that the boards are using the expected PSPP policy
and not just the UPD default from the FSP binary that has already
changed once during the development.
BUG=b:188793754
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1b6459b2984711e72b79f5d4d90e04cb4b78d512
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54930
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch also adds the additional 10 MCAX registers to the BERT MSR
error record.
BUG=b:186038401
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I31912d3b3e77e905f64b6143042f5e7f73db7407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The AMD FSP is using a new structure for USB and USB C phy settings.
This patch removes old, unused structures, adds the new one and
enables the devicetree interface for it.
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Change-Id: I011ca40a334e4fd26778ca7f18b653298b14019b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
ESPI_SLAVE_CHANNEL_READY is a read-only bit from the host perspective.
It is set when the eSPI peripheral has configured the channel.
We actually want to set the ESPI_SLAVE_CHANNEL_ENABLE flag. This never
caused an issue before because the peripheral channel is enabled by
default after PLTRST# is deasserted. This does fix the case where
periph_ch_en == 0. It now properly clears the enable flag.
BUG=b:188188172, b:188935533
TEST=Boot guybrush to OS, perform warm reset
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I24e0734d5652601ae9c967da528fec5e3f780991
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The ChromeEC might take longer than 1ms for the peripheral channel to be
enabled. The PLTRST# interrupt handler takes about ~539us.
This doesn't account for the time it takes for the interrupt handler
to be scheduled. Increasing the timeout to 10ms gives ample time.
BUG=b:188188172, b:188935533
TEST=Boot guybrush and no longer see channel enable errors
Suggested-by: Rob Barnes <robbarnes@google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib6db577bf06175ceb17b446af706ad8c9f891481
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54788
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default of CBFS_MCACHE_SIZE is increased to 0x4000 in CB:54146 but
we have limited space on the PSP thus cannot afford it.
BUG=b:177091575
BRANCH=none
Signed-off-by: Kangheui Won <khwon@chrmoium.org>
Change-Id: I94dd782ae00d0b18ad6dd2fc061e4318bda88579
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
NCP_ERR is a 1 byte register in I/O-space, so use inb and not inw. The
variable the result gets assigned to is also a uint8_t.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9fd8c139004111d6227c0316ba2a8b0281541654
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
commit ce0e2a0140 (drivers/intel/fsp2_0:
use FSP to allocate APEI BERT memory region) adds a mechanism to reserve
the BERT region inside the coreboot code, so we can get rid of the
workaround to reserve it in the FSP and return the location in a HOB.
mcfg->bert_size defaults to 0 which makes the FSP not generate the
corresponding HOB, but that field is planned to be removed at least on
Cezanne, so don't explicitly set it to 0.
BUG=b:169934025
TEST=BERT table that gets generated in a follow-up patch for Picasso
points to expected BERT region and Linux is able to access, decode and
display it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaca89b47793bf9982181560f026459a18e7db134
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52584
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When performing an in-band reset the host controller and the
peripheral can have mismatched IO configs.
i.e., The eSPI peripheral can be in IO-4 mode while, the
eSPI host will be in IO-1. This results in the peripheral
getting invalid packets and thus not responding. This causes the
NO_RESPONSE status bit to be set and cause eSPI init to fail.
If the peripheral is alerting when we perform an in-band
reset, there is a race condition in espi_send_command.
1) espi_send_command clears the interrupt status.
2) eSPI host controller hardware notices the alert and sends
a GET_STATUS.
3) espi_send_command writes the in-band reset command.
4) eSPI hardware enqueues the in-band reset until GET_STATUS
is complete.
5) GET_STATUS fails with NO_RESPONSE and sets the interrupt
status.
6) eSPI hardware performs in-band reset.
7) espi_send_command checks the status and sees a
NO_RESPONSE bit.
As a workaround we allow the NO_RESPONSE status code when
we perform an in-band reset.
BUG=b:186135022
TEST=suspend_stress_test and S5->S0 tests on guybrush and zork.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I71271377f20eaf29032214be98794e1645d9b70a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
I'm not 100% sure if this should rather be duplicated from Picasso or
commonized. Checked with the docs and this won't be compatible with
Stoneyridge and one future product's PPR lacked the corresponding
register. Some other chip has a compatible register layout, but a
different number of PCIe GPP clock outputs, so the common code would
need to use some SoC-dependent defines and possibly a SoC-specific
lookup table for the mapping which is also not that great.
TEST=Checked Cezanne PPR
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b6d0cb8d7eb0288d8a18fcb975dc377b2c6846a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54685
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since this enum is only used for the devicetree settings and not for the
hardware itself, move it from the southbridge header to the chip one.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0907fc5cba9315fec5fabff67d279c6d95d1c9f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54684
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need to include this code separately on each
platform.
Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
PSP_SOFTFUSE_BITS used to be like this:
15 0 29 "28 6"
It causes internal shell report error:
/bin/sh: -c: line 0: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 1: syntax error: unexpected end of file
/bin/sh: -c: line 0: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 1: syntax error: unexpected end of file
Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
By default, FSP disables the GFX HDA. Enable it to support HDMI Audio
functionality.
BUG=b:186479763
TEST=Build and boot to OS in guybrush. Ensure that the GFX HDA is
enumerated in lspci output.
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637
Change-Id: I42cb26c44bbca3d937c5d52736c42468139f7b07
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54100
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also drop unneeded intermediate cast to void * before casting the
address of the struct dptc_input type variables to uint8_t *.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie1e2aa1ec728a4e16d3a587d7400cdfc8962f443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This adds support for convertible devices to support different maximum
power and thermal configurations. The dynamic power and thermal
configuration (DPTC) via ACPI ALIB calls allows to change the parameters
during runtime. This code contains the assumption that
\_SB.PCI0.LPCB.EC0.TBMD exists when ACPI code calls the DPTC method. At
the moment only chromeec declares EC0.TBMD, but it's also the only code
that calls the DPTC method. The definition of DPTC_INPUTS isn't moved to
the common code directory, since it's currently unsure if we might need
to configure more than those 4 parameters for Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibdfc056cb325a32d87505dd93e01c9af81dfd6c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Cezanne PSP is missing implementations for some svc apis. Do not
include files related to missing svc apis.
This CL should be reverted after the cezanne PSP supports these
functions.
BUG=b:187906425
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ibaab4e8435624d403ef18e980146ebfd1598b61b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This will change the names of the GPP bridges, but this ok since there
is no hand written ASL that references these names.
BUG=b:184766519
TEST=Boot picasso and dump ACPI
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic09200156e8a37bd1a29ca95a17c8f8ae2b92bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54028
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lowercase characters are not valid ACPI identifiers.
BUG=b:184766519
TEST=Boot picasso to OS and verify ACPI errors are no longer printed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I75aca67f4607e97ced8ac00ac68e51c359aff944
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Cezanne and Picasso can now use the same driver.
BUG=b:184766519
TEST=Boot guybrush and dump ASL. Verified it didn't change.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie4ede82935d6c69b323c1fdceaa61e306aa2820a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
This is still causing boot errors on zork:
coreboot-4.13-3659-g269e03d5c42f Fri May 7 22:03:11 UTC 2021 bootblock starting (log level: 8)...
Family_Model: 00820f01
PSP boot mode: Development
Silicon level: Pre-Production
Set power off after power failure.
PMxC0 STATUS: 0x800 BIT11
I2C bus 3 version 0x3132322a
DW I2C bus 3 at 0xfedc5000 (400 KHz)
FMAP: area COREBOOT found @ 875000 (7909376 bytes)
ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106
BUG=b:177323348
TEST=Boot ezkinil to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I68b4b73670e750207414f0d85ff96f21481be8ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53933
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 6eced03b25.
This prevents zork from booting. We get the following error:
eSPI cmd0-cmd2: 00080009 00000000 00000000 data: 00000000.
Error: unexpected eSPI status register bits set (Status = 0x10000010)
Error: Slave GET_CONFIGURATION failed!
This isn't a pure revert. It is more of a fix that keeps the old
behavior.
BUG=b:187122344
TEST=Boot zork an no longer see eSPI error
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If75a35d3994b0fd23945a450032d3cc81abeb136
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53932
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Cezanne must use cold resets. Change the warm reset request to always
set TOGGLE_ALL_PWR_GOOD. And, since the bit is sticky across power
cycles, set it early for good measure.
BUG=b:184281092
TEST=Majolica successfully resets using 0xcf9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I7d4ca5665335b20100a5c802d12d79c0d0597ad9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Loading address and size for the user app has been changed with recent
PSP release.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: If247cdf3413c6a10f4b3c92fb7e43dd1057865d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Verify if transfer buffer is valid before progressing further to catch
invalid transfer buffer early.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I4c470b156944b50e581dcdee47b196f46b0993f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52965
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMDFW tool stores bios dir entry to bios1_entry in picasso but
bios3_entry in cezanne. Separate getting bios_dir_addr into a function
and implement it on each platforms.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ie18ed7979a04319c074b9b251130d419dc7f22dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52964
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move all platform-specific code except direct svc calls to chipset.c.
There will be differences between each platforms and we can't put
everything into svc.c.
TEST=build firmware for zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ie7a71d1632800072a17c26591e13e09e0269cf75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52963
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
psp_verstage.bin target is already defined at
common/psp_verstage/Makefile.inc, thus removing it here.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ica4b09282d1c4cfc555c18ba50951458b8580826
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52962
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Build amdfw_[ab] and put them into CBFS. We can reuse FW_[AB] position
from zork since we have same flash layout and size.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Idb31afa7a513f01593b2af75515a170dfca8d360
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52961
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We can generate the names, so there is no need to hard code a table.
This will make the code more generic so it can be reused with picasso in
the future.
BUG=b:184766519
TEST=Dump guybrush ACPI table and verify it looks correct.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5134d1dba4fcb9ce8cc4bfad1c619331a95f3b11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52870
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We can now use the GNB IO-APIC.
BUG=b:184766519
TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic`
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4df5a4583f14044d2efcde3a9de9dd85e898a11d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53936
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To configure and enable the IOAPIC in the graphics and northbridge (GNB)
container, FSP needs to write an undocumented register, so pass the GNB
IOAPIC MMIO base address to make it show up at that address.
BUG=b:187083211
TEST=Boot guybrush and see IO-APIC initialized
IOAPIC[0]: apic_id 16, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 17, version 33, address 0xfec01000, GSI 24-55
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1e127ce500d052783f0a6e13fb2ad16a8e408b0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52905
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the new acpigen_write_PRT to write the _PRT for each PCI bridge.
BUG=b:184766519
TEST=Dump guybrush ACPI table and verify it looks correct.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idb559335435a95e73640e6d7fb224e16e0592326
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This uses the new FSP PCI methods to pull the routing table and populate
the pirq data structure.
BUG=b:184766519
TEST=Boot guybrush and verify we get Got IRQ 0x1F (disabled) messages
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie21229cc2fb4fd5b85c0b9e933f7b43af24864b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
These are helper methods for interacting with the
AMD_FSP_PCIE_DEVFUNC_REMAP_HOB_GUID.
BUG=b:184766519, b:184766197
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id03d0b74ca12e7bcee11f8d13b0e802861c13923
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We can now delete the picasso specific version.
BUG=b:184766519
TEST=Build zork and verify SSDT has not changed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic79014e83c9ff63cc7a6757b16764ae23b36984f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53935
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is loosely based off of picasso/pcie_gpp.c. This version uses the
acpigen_write_PRT_X methods to write the actual records. There are also
two functions, 1 for using the GNB, and one for using the FCH. The FCH
one is useful when the GNB IO-APIC has not been initialized.
BUG=b:184766519
TEST=Dump guybrush ACPI and verify it looks correct
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I926430074acb969ceb11fdb60ab56dcf91ac4c76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The method now dynamically allocates the pirq structure and uses the
get_pci_routing_table method.
BUG=b:184766519
TEST=Build guybrush and verify picasso SSDT has not changed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I297fc3ca7227fb4794ac70bd046ce2f93da8b869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This allows us to use the common get_pci_routing_info and
pci_calculate_irq. The IRQ field in the struct was also filled in from
the PPR.
BUG=b:184766519
TEST=Boot ezkinil and verify SSDT table is identical.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I16d90d8c89bfcf48878c0741154290ebc52a4120
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53923
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This struct is similar to `struct pci_routing` defined in
picasso/pcie_gpp.c. It additionally contains the irq used for the bridge
and is structured in a way that the FSP can provide via HOB.
The next set of CLs will migrate the pci routing functions used by
picasso into common and enable pci routing table generation for cezanne.
BUG=b:184766519
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1a8d988d125f407f0aa7bc1722d432446aa9aff8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
TEST=Mandolin still boots into Linux and there's no ACPI warning in
dmesg.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7e6d38ebeae5e55a4a65930b989838532ab9c446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53920
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also add an alib_ prefix to avoid possible name collisions.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib0f220a4cde6da764bb8bc589b5f44ae16496bd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53918
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These parameter IDs are defined in the AGESA Interface specification
#55483. This patch also adds a ALIB_DPTC_ prefix to the IDs and makes
the names more consistent.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I75e0504f6274ad50c53faa8fcbde4d6821d85a04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53917
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The other enum entries are control IDs for the
ALIB_FUNCTION_DYNAMIC_POWER_THERMAL_CONFIG ALIB function while
DPTC_TOTAL_UPDATE_PARAMS is the total number of configuration settings
that will get passed as parameter in the ALIB call, so it shouldn't be
part of that enum.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0cb9e9d2ba579a74d916011b4ead71cc86d69a24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53916
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ACPI ALIB function numbers are defined in the AMD Generic
Encapsulated Software Architecture (AGESA™) Interface Specification
(document #55483).
TEST=Timeless build stays the same for Mandolin (Picasso) and Gardenia
(Stoneyridge).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I290ef0db32c65ebb2bbbe4f65db4df772b884161
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53915
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCI interrupts are level active low, so they can be shared.
BUG=b:184766519
TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic`
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I439337dd66fe56790406c6d603e73512c806a19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52957
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will allow us to have subdirectories in common/fsp.
BUG=b:184766519
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib3497791e1963867c8fe06a42c111e5d0503ade1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Some designs might wish to use an open drain eSPI ALERT#. This change
adds an enum that allows setting the eSPI alert mode.
BUG=b:187122344, b:186135022
TEST=Boot guybrush using all 3 alert modes
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The eSPI spec says that the Alert Mode defaults to in-band on reset.
This change ensures the controller is in sync with the eSPI peripheral.
The configured alert mode is configured in
espi_set_general_configuration.
BUG=b:187122344, b:186135022
TEST=Boot guybrush and make sure we don't get any eSPI errors.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib43e190d08d77ecfcd22ead2bf42e5de2202b555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52953
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will print the config we are setting on the eSPI peripheral.
e.g.,
Setting general configuration: slave: 0x98a00000 controller: 0xe2000000
eSPI Slave configuration:
CRC checking enabled
Dedicated Alert# used to signal alert event
eSPI quad IO mode selected
Only eSPI single IO mode supported
Alert# pin is open-drain
eSPI 33MHz selected
eSPI up to 20MHz supported
Maximum Wait state: 0
BUG=b:187122344, b:186135022
TEST=Boot guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1a2382d8ab3d3f0d14a139c57470cb895112eca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52952
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We can share this with cezanne.
BUG=b:184766519
TEST=Build picasso
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If746d55345f6b7c828376b64adc5532d20413f68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52916
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This method signature will also be used by cezanne, so move it to
common.
BUG=b:184766519
TEST=Build picasso
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I421bdad51776278f83148174e6f72bdc38249e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
this adds the ALIB SSDT that gets passed from the FSP to coreboot via a
HOB.
BUG=b:185481298
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8a7dae5789eee442b321ddf276494eb53fc5f499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This function will be used to add some SSDTs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia88cb5ea483850a8659f3bae8040c82eb2735d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
If the ACPI table size in the HOB data header is larger than the maximum
HOB payload, don't add the table at all and print an error instead,
since in this case the memcpy would read past the end of the HOB data
structure.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I965c01bd9ab66b14d6f77b6f23c28479ae6d6a50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52897
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function will be reused in Cezanne, so move it from the Picasso
directory to the common FSP integration code.
TEST=On Mandolin Linux finds the AMD SSDT that contains ALIB.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b256de712fe60d1c021cb875aaadec1d331584b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
For CRBs without Google EC with CONFIG_CHROMEOS=y we will get a build
error as google_chromeec_cbi_get_dram_part_num() is not defined. Use
EC_GOOGLE_CHROMEEC instead of CHROMEOS to gate the call.
BUG=b:184124605
Change-Id: I2b200f4fb11513c6fc17a2f0af3e12e5a3e3e5a1
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The usage of external oscillator has got nothing to do with Audio
Co-processor (ACP). Hence move it out of common config and put it into
the SoC config where it is being used.
BUG=None
TEST=Build Dalboz and Vilboz mainboards.
Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add telemetry setting to UPD, the value comes from the SDLE testing.
BUG=b:182754399
TEST=Build & Boot guybrush
Cq-Depend: chrome-internal:3787638
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I9dd3643e9c582a41192130901935eef321b2c67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52733
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We no longer lock up if we clear the port 80 bit. I'm assuming this was
fixed when we configured the PSP to no longer setup eSPI.
BUG=b:183974365
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1530d08974d42e0b06eb783521dea32fca752d85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Temp stack for verstage is only needed for picasso, so make it optional
in the layout file.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I44196103a3531e9d01c96ab8f454c8b580fe9807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
From cezanne we have enough space in PSP so we don't have to worry about
workbuf size. Hence the function only exists in picasso and deprecated
for later platforms.
So wrap svc_get_max_workbuf_size and provide default weak function so
future platforms don't have to implement dumb function for it.
TEST=build and boot zork, check weak function is not called in zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I16e8edf8070aaacb3a6a6a8adc92b44a230c3139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
These addresses will be changed in cezanne. Before start working on
cezanne, move these out to separate header as a clean-up.
TEST=emerge-zork coreboot
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I2499281d250aae701f86bfcc87c7681e5b684b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Audio Co-processor driver is similar for both Picasso and Cezanne SoCs.
Hence move it to the common location.
BUG=None.
TEST=Builds Dalboz, Trembyle, Vilboz, Mandolin and Bilby mainboards.
Change-Id: I91470ff68d1c183df9a2927d71b03371b535186a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
We don't have any infrastructure setup to handle SCI SMIs. Instead of
just silently ignoring the SMI, print a warning saying that it is
being ignored.
BUG=none
TEST=Trigger an SCI SMI and see warning printed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I803e572250925b7d5ffdbb3e8958f9aff1f808df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52674
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Cezanne version of psp_transfer.h lacks some necessary definitions.
Currently we don't have any plan to change transfer buffer structure in
cezanne, so just copy'em over.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I9361c4ab76c8ded06358a7718d5e447c16414721
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52540
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are just copied from picasso one.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I701d6af63b24e86f8e132fad73504e20148a2bf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Like the Picasso platform, it's very useful to have units on these
variables.
BUG=b:185209734
TEST=Build & Boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I592c807c5e9a2c17b1c5959e56a01237352c5204
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
These values will be added in the upcoming STAPM configuration update.
BUG=b:185209734
TEST=Build & Boot guybrush
Cq-Depend: chrome-internal:3780259
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I2a6835c16badfe505e3c33b356ca671766cd6972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: chris wang <Chris.Wang@amd.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
hdmi2_disable bit0~3 is used to disable HDMI 2.0 function in DDI0~3
BUG=b:179170193
BRANCH=none
TEST=Build; Verify the UPD was passed to system integrated table
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Change-Id: I383bfd04e01f5202db093105662344869e475746
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Configure the S0i3 enable UPD based on the mainboard configuration.
BUG=b:178728116
TEST=Build and boot to OS in Guybrush. Enter S0i3 after passing the
sleep state configuration from the mainboard.
Change-Id: I18f43e964d1c70317155394257a5e2c1900816bb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Currently, some of the PSP Soft Fuse bits are hardcoded in the Cezanne
and Picasso makefiles.
This makes it impossible for platforms to change them. This change puts
the hardcoded bits in Kconfig, allowing them to be modified by the
platform.
BUG=b:185514903
TEST=Verify that the correct Soft Fuse bits are set.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I190ebf47cb7ae46983733dc6541776bf19a2382f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52422
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MC0_CTL_MASK is no longer available in fam 17h and newer and will result
in a general protection fault when accessed. This register was moved, so
use the one that is correct for this CPU generation.
BUG=b:186038401
TEST=Mandolin no longer crashes in the machine check error handling path
with a general protection fault.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibb042635d917dfcb2121849e2913aa62eca09dd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add defines for the Machine Check Architecture Extensions (MCAX) MSRs
and the new MCA_CTL_MASK MSRs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id78483e7df00c3e99c698c0344f38be68d1dfb72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Trying to limit the number of available cores by setting the MAX_CPUS
Kconfig option to a lower value than the SoC's default might result in
cores being enabled in the FSP-S, but not fully initialized in coreboot
which will cause some malfunction. Add a static assert to make sure
that this option isn't changed from the default. To limit the maximum
number of cores, use the downcore_mode and disable_smt devicetree
settings instead.
TEST=Build fails if MAX_CPUS isn't the expected default.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3cfe09f8bb89a2154d37a37398df982828c824f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Trying to limit the number of available cores by setting the MAX_CPUS
Kconfig option to a lower value than the SoC's default might result in
cores being enabled in the FSP-S, but not fully initialized in coreboot
which will cause some malfunction. Add a static assert to make sure
that this option isn't changed from the default. To limit the maximum
number of cores, use the downcore_mode and disable_smt devicetree
settings instead.
BUG=b:184162768
TEST=Build fails if MAX_CPUS isn't the expected default.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idd6aa1d99128b17218a8e910c33415218a58578f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52606
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clean up Kconfig and psp_trasfer.h files before copying over to cezanne.
TEST=build, flash and boot on jelboz360
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ib370d93e23c15a2fe4c46051ed3647d2d067bb10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52563
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
if ENV_X86 is not true we had several compile errors in i2c code. Fix
them before we add code for psp_verstage which is non-x86.
BUG=b:182477057
BRANCH=none
TEST=build
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I0796671dd34ab2d0f123c904a88c57cdad116a57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
bl_syscall_public.h is a header file for PSP app, but was used for x86
code to get the definition of PSP_INFO. Move the definition into
psp_transfer.h and do not include bl_syscall_public.h from x86 code.
BUG=none
TEST=build psp_verstage on zork
BRANCH=none
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I0fe011652a47d0ba2939dc31ee3b83f0718a61dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52537
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
size_t is used in the code, so we should include types.h instead of
stdint.h to also have those type definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I04c50de257a2d6982bfd4907eb5a1325a751919a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52582
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add PSP_DISABLE_POSTCODES and PSP_POSTCODES_ON_ESPI kconfig options for
cezanne. Select PSP_DISABLE_DISABLE_POSTCODES and unselect
PSP_POSTCODES_ON_ESPI for guybrush. Port80 codes from PSP can cause bus
errors on guybrush.
BUG=b:185514903, b:184356693
TEST=Boot guybrush, observe no port80 codes from PSP
Change-Id: I7241e47ec1b89782e699135370c796eb251afcaa
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52401
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The linux kernel requires a valid _OSC method. Otherwise the _LPI table
is ignored.
See https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.10/drivers/acpi/bus.c;l=324
Before this patch:
acpi_processor_get_lpi_info: LPI is not supported
After this patch:
acpi_processor_evaluate_lpi: ACPI: \_SB_.CP00: ACPI: Found 4 power states
BUG=b:178728116
TEST=Boot OS and verify _LPI table is parsed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I44e554b9db6f70fdd1559105cdaee53aeb2bfbf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Clarify that the downcoring is about deactivating physical cores.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8a9d1cedff995c507c3be72e7665953e1659238
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Even though the UPD field this information is finally written to is an 8
bit value, the smt_disable option is only a boolean.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaac49944993a28ffb98a80201effe1238ec60875
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52553
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the next patch will use a boolean, replace the stddef.h and
stdint.h includes with types.h to have all that we'll need.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0d062c8de29aa3688a911d7887faf592020b33c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52552
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we use uintX_t, bool and friends, we need to make sure to include
the corresponding definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icb8a6e93d7f1923ac95e584fb3e33c391963f5ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52551
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The name of the and_mask parameter was a bit misleading, due to the
function inverting the value. Renaming this into clear and set makes it
more obvious what those parameters will actually do.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If307ab4858541861e22f8ff24ed178d47ba70fe5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The uPEP device is required to support S0i3. The device has been written
in ASL to make it easier to read and maintain. The device constraints
are purely informational. We use a dummy constraint like the Intel
platforms to keep both linux and Windows functional.
In order for this device to be used by the linux kernel the
ACPI_FADT_LOW_PWR_IDLE_S0 flag must be set. So including it
unconditionally doesn't cause any problems.
The AMD Modern Standby BIOS Implementation Guide defines two UUIDs,
one for getting the device constraints, and one for handling
notifications. This differs from the Intel specification and the linux
driver implementation. For this reason I haven't implemented any of the
notification callbacks yet.
BUG=b:178728116
TEST=Boot OS and verify _DSM is called:
[ 0.226701] lps0_device_attach: ACPI: \_SB_.PEP_: _DSM function mask: 0x3
[ 0.226722] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: _DSM function 1 eval successful
[ 0.226723] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list begin:
[ 0.226724] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list end
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2deef47eabe702efe1a0f3747c9f27bcec37464b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52445
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit ad7c33abd2. With EFS2
already enabled in EC, enabling early EC sync is not required. Also a
workaround has been added in payload to address any boot issues.
BUG=b:185277224
TEST=Build and boot to OS in Guybrush in both normal and recovery mode.
Cq-Depend: chromium:2832032
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I34f8433739754365c8e5a10fdf7e58e3d1e7e797
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52419
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI_BERT_SIZE is used in the FSP driver and the fsp_m_params.c. The
latter one is planned to be deprecated though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id1a250defbd31e255df9b7a7dd8488dc3182649b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since there are some differences between picasso PSP svc and cezanne PSP
svc, each platform should have their own svc wrapper.
Moreover cezanne PSP will drop unused parameters from
update_psp_bios_dir and save_uapp_data so make wrapper around it.
BUG=b:182477057
BRANCH=none
TEST=build psp_verstage and boot on zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I69f998865fc3184ea8900a431924a315c5ee9133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52307
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
psp_verstage is not specific to picasso. There might be picasso-specific
code but move everything into common as a first step. While developing
psp_verstage for cezanne picasso-specific code will move back to picasso
directory.
BUG=b:182477057
BRANCH=none
TEST=build psp_verstage on zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ifb1df0d82b972f28be2ffebd476c2553cbda9810
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The Kconfig value specified Intel instead of AMD.
BUG=b:184198808
TEST=Backlight enabled in the OS
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I9fbdf821591ec886f383c1a5ac197f8f213c4cc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52384
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add generate_cpu_entries to device operations. Add support to
generate cpu p-state and c-state SSDT entries.
BUG=b:184151560
TEST=Dump and verify SSDT entry for CPU p-states and c-states.
Change-Id: I77d8078b94fb661dc045b4184955c8cbec373d12
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add uart controller to chipset.cb and leave it off by default.
Turn uart0 on for console for mainboards.
BUG=none
TEST=builds and boot into OS
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: Iaeb7fea4b92bd89331c7ae7c1c000f8d9961fe9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Needed so we can switch to normal mode.
BUG=b:184126844
TEST=Boot guybrush in developer mode and switch to normal mode.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I26ad160a2372484e9753a727f2b454a31e3537a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
There is no need to stash the SCI trigger register configuration and
apply it at the end. Remove this to make SCI and SMI programming more
symmetrical and to use available configure_scimap function instead of
implementing it again, but without the additional checks. Using this
function also allows removing soc_route_sci.
Change-Id: Ie23da79546858282910db65182a6315ade506279
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The functionality to restore the previous power state after power was
lost that could previously be enabled by selecting
MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved
by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's
Kconfig instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49c4a44ca2c4fa937a823c4eddf1618739c15114
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The functionality to restore the previous power state after power was
lost that could previously be enabled by selecting
MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved
by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's
Kconfig instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab9578ebea89651dc2389bf6ca93ca3f3507eb47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Picasso and Stoneyridge didn't do a read-modify-write operation on the
lower nibble of PM_RTC_SHADOW_REG, but just wrote the upper nibble as
all zeros. Since the upper nibble might be uninitialized before the
lower nibble gets written, do what Picasso and Stoneyridge did here
instead of what the reference code does. Also add a comment why and how
this register behaves a bit weird.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bda2349e3ae84cba50b187cc773fd8a5b17f4e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Not selecting POWER_STATE_DEFAULT_ON_AFTER_FAILURE brings Cezanne that
is currently the only SoC using this functionality in line with Picasso
where the default is that the board remains in power off mode after
power was lost and later restored. Boards can change this behavior by
selecting POWER_STATE_OFF_AFTER_FAILURE, POWER_STATE_ON_AFTER_FAILURE or
POWER_STATE_PREVIOUS_AFTER_FAILURE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic96f40e3c9867cd821e58d752f58b763930f6d0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Without this being selected, mainboards can't select
MAINBOARD_POWER_STATE_PREVIOUS to use the power state restoration code
path in pmlib.c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I753659fa753e03a66b6c6b2eb97e7ef20c71ca57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The prototype of gpio_add_events() is provided by that header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia384c9297ac1e24bf0b1bcce048012a247406f39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52274
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Guybrush complains that this is missing during the boot, so add it to
cezanne. I verified that the registers in gpio.c are correct.
BUG=b:184549804
TEST=Build and boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de3764c99fe89b962db88065575463b365ddaf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Since Cezanne needs the exact same code, move it to the common directory
and add a Kconfig option to add this functionality to the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I04c4295071a3df7afcb4dfd5435b11fb0bf6963f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Verified that all accessed registers exist in all SoCs that use this
code (Carrizo, Mullins, Stoneyridge, Picasso and Cezanne at the moment)
and that the bit definitions match as well. Also at the time of writing
this patch only Picasso calls gpio_fill_wake_state, so dropping the
check won't change behavior. This also avoids having SoC specific code
that doesn't get selected by Kconfig options in the common AMD SoC
directory and also avoids having to add a check for SOC_AMD_CEZANNE to
support this functionality on Cezanne in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If770780a67776daf81744db1b635ffd402653a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52223
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure the power state to return to when the power is re-applied
after power failure.
BUG=b:183739671
TEST=Build and Boot to OS in Majolica and Guybrush. By default when the
power fails the device turns on after power is re-applied. When the
POWER_ON_AFTER_POWER_FAILURE is disabled, the device remains off even
after the power is re-applied.
Change-Id: I21c5da08c82156d6239450ef6921771da74cbaa1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52049
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce a power management library to handle the power resume after
power failure. Enable HAVE_POWER_STATE_AFTER_FAILURE config when this
library is enabled.
BUG=b:183739671
TEST=Build Guybrush and Majolica mainboard.
Change-Id: Iea4ea57d747425fe6714d40ba6e60f2447febf28
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add GRXS and GTXS support. Move the gpio method into common place.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I8ba377179d6976cf26ed0dc521d8e4eff051dc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This override was added to have the SCI mapping configured if GPIO was
used as WAKE_L pin. This however didn't set up the SCI level and trigger
information, so it likely never worked as intended.
Change-Id: I44661f05c8f517ece88714c625603579731d174b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This register is used for masking/unmasking eSPI IRQs.
BUG=none
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia209539b2e0ce390e227757b16c2969b9124a845
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52142
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the functionality to write the DXIO and DDI descriptors
to the UPD data structure to the SoC code and adds the
mainboard_get_dxio_ddi_descriptors function to each mainboard using the
Cezanne SoC that gets called to get the descriptors from the board code.
Change-Id: I1cb36addcf0202cd56ce99e610a13d6d230bc981
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The UPD header files get generated as part of the FSP build process. For
the initial Cezanne development we took the Picasso UPD data structures
as a starting point. This patch replaces it with the first version of
the Cezanne-specific UPD data structures that is present in version 12
of the internal work-in-progress FSP binary drops.
The serial_port_stride UPD-M field is removed, since the information is
already given by serial_port_use_mmio. The stride is 4 bytes for the
MMIO UART case and 1 byte for the legacy I/O case.
BUG=b:182524631
TEST=NVMe works on google/guybrush when the rest of the patch train is
applied as well.
Change-Id: Idca235029bf2e68d403230d55308820cab61a6c0
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This is a copy of picasso.
BUG=b:184151560
TEST=Compared with the cezanne PPR.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia4bc40daa971c126c2596837155312d411b91a06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
espi_setup already clears most of the controller registers. So this
change consolidates the clear logic into one spot.
This shouldn't result in a behavior change on Picasso. Picasso already
has the eSPI decodes clear on boot, so this change is a nop.
BUG=b:183524609
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic57689e50febd29796d8ac8d99c81e41fee5b41c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This is only ever called after espi_setup.
55861 - AMD System Peripheral Bus Overview also says that io ranges
should be configured before enabling the BUS_MASTER bit.
BUG=b:183524609
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I074e487d8768a578ee889a125b9948e3aa6c7269
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tidy up the interrupt status. This will leave SLAVE0_INT_STS = 0.
BUG=b:183524609
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I950cfb81521e35758c120a482670cfdb924201d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52056
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This sets the eSPI registers to the reset values specified in the PPR.
On Cezanne, the PSP modifies these registers such that the eSPI
peripheral cannot send DEFER packets. This causes random bus errors.
These reset values are identical to what is currently used on Zork.
I didn't clear out ESPI_DECODE because it's currently being done by
cb:51749.
BUG=b:183524609
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic3a9860747aac78121358b4499d8a38052236c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These are defined in the public Picasso PPR - 55570-B1 Rev 3.15.
BUG=b:183524609
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7e601f767327e0a24a086146623af039388b2e7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52057
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Cezanne PSP configures the eSPI with the assumption that it's a
majolica, setting up both the serial port and the majolica EC IO decode
ranges. Since guybrush is NOT a majolica, this doesn't work very well
there. Clearing the decode ranges allows the guybrush platform to set
the decode ranges needed for its EC.
BUG=b:183524609
TEST=Set up eSPI on Guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I77cfb948cb9ae6d1cf001bd9e66cede8d93f50b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Previously, the eSPI code would only add to existing decode ranges, and
there wasn't any way to clear ranges. This clears all the ranges so
the eSPI configuration can start fresh.
BUG=b:183207262, b:183974365
TEST=Verify on Guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ic4e67c40d34915505bdd5b431a064d2c7b6bbc70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Ideally we would like to perform EC Software Sync in payload. But with
the hardware requirement (EC_IN_RW) and firmware requirement (TPM
command to get EC execution environment) not met yet, adding the support
to perform early EC Software sync. With EFS2 enabled, this will also
help cr50 to set the boot mode as NORMAL instead of NO_BOOT.
BUG=None
TEST=Build and Boot to OS in Guybrush. Ensure that the EC software sync
is successfully complete.
CBFS: Found 'ecrw.hash' @0x50400 size 0x20 in mcache @0x020171ec
VB2:check_ec_hash() Hexp RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
VB2:check_ec_hash() Hmir: 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
<snip>
VB2:check_ec_hash() Heff RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
VB2:sync_ec() select_rw=RW(active)
Change-Id: I820e651c6b22a833fef6f17a4ceb5a8cfb6f1616
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Needed so we write the correct resource into the ACPI tables.
BUG=b:183737011
TEST=Boot OS and see GPIO devices working
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2ba4349e0ed500912db40aa6ef9b649046f4358f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51961
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the cr50 on guybrush to show up in ACPI.
BUG=b:183737011
TEST=Boot OS and see I2C devices initialized
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifb5679b7bbefbf753217981874bb1bdaef35f6db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51958
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pci_rom_ssdt reloads the oprom from cbfs. It then places it into cbmem
and writes the offsets as the ROM ACPI node. The GOP driver modifies the
VBIOS so we don't want to reread from cbfs. When using GOP we also pass
the offsets with the VFCT table.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaf53e750564f1f0e115cd354790da62e672d74b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The coordtype parameter of acpigen_write_CSD_package expects a CSD_coord
enum value, but HW_ALL that got passed as parameter is a PSD_coord enum
value, so replace that with the correct CSD_HW_ALL enum value.
TEST=Timeless build results in identical binary for Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Found-by: Paul Menzel <pmenzel@molgen.mpg.de>
Change-Id: I90b19345b8dc6d386b6acfa81c6c072dcd6981ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Causing the AOAC register access as part of system suspend (S3) causes
the suspend procedure to be stuck. Comment it for now to unblock
entering S3 and collecting the power numbers.
BUG=b:181766974
TEST=Build and boot to OS in Majolica. Enter S3 through "echo mem >
/sys/power/state".
Change-Id: Ie93bbe393b209b784b9a2257f3916b29d84b25d1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51926
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the format warning below by using `PRIxPTR`, which is defined as
unsigned long.
src/soc/amd/common/block/smbus/smbus.c:33:56: error: format specifies type 'size_t' (aka 'unsigned int') but the argument has type 'uintptr_t' (aka 'unsigned long') [-Werror,-Wformat]
printk(BIOS_ERR, "Invalid SMBus or ASF base %#zx\n", mmio);
~~~~ ^~~~
%#lx
src/include/console/console.h:60:61: note: expanded from macro 'printk'
#define printk(LEVEL, fmt, args...) do_printk(LEVEL, fmt, ##args)
~~~ ^~~~
1 error generated.
Change-Id: I727c490d3097dcf36cdbcd4db2852cd49d11785f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move the parts of romstage.c that populate the UPD-M data structure to
the newly created fsp_m_params.c file. Since
platform_fsp_memory_init_params_cb gets called from the FSP driver and
not directly from car_stage_entry the two code parts in romstage.c
weren't directly interacting.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1f7f5879ac318372042ff703ebbe584ce1c32c91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Move the parts of romstage.c that populate the UPD-M data structure to
the newly created fsp_m_params.c file. Since
platform_fsp_memory_init_params_cb gets called from the FSP driver and
not directly from car_stage_entry the two code parts in romstage.c
weren't directly interacting. Since soc/romstage.h only contains the
mainboard_updm_update function prototype, rename it to soc/fsp.h. This
patch also removes a few unused includes.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This file populates the UPD-S data structure that gets passed to the
FSP-S, so add that s part to make it a bit clearer which FSP parameters
it'll set up. This is also a preparation to add a fsp_m_params.c file in
the following patches.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53786df0909055e66eac675b5580909b7960944f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The KBRST_L pin will cause a reset when driven or pulled low even when
the GPIO mux is set to GPIO and not native function. So when you want to
use that pin as general purpose output the keyboard reset input
functionality needs to be disabled by selecting this option in the
board's Kconfig file to avoid causing a reset by writing a 0 to the
output level bit when it's configured as an output.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Furquan Shaikh <furquan@google.com>
Change-Id: I517ad551db9321f26afdba15d97ddb61be1f7d51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51757
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=none
TEST=Build guybrush and verified with the PPR that the register and bits
are still the same
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0619f84cf82cbb90ded9dfd58afa6acc9520fb8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TEST=Verified that this register and the defined bits exist in Cezanne,
Picasso, Stoneyridge, Bolton and SB800.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32d1d577b05edab006981516a5aefd822e7b984a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds a pin configuration macro that supports both switching a
pin to its native function and configuring it as a SCI source. This is a
preparation to remove the GPIO2 soc_gpio_hook.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If0da5c010f35fd902f6b8857368daec93c12394a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50373
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to use a fixed-width type here.
Change-Id: I727c64661990040db356c5508fecc0a65960c095
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51794
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The correct printf format specifier for an `unsigned int` is `%u`.
Change-Id: Iaf780eb366f8c3493b89beb9a5643fa285e7825d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51793
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit 4f87ae1d4a introduced a regression
in the I2C initialization resulting in soc_i2c_misc_init never getting
called, since the continue statement was indented like it belonged to
the if above, but due to the missing curly braces it was outside the if
block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Found-by: Coverity CID 1451395, 1451387
Change-Id: Id1f17ad59cba44e96881f5511df303ae90841ab3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51786
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a helper bit mask to enable wake from either S0i3 or S3.
BUG=None
TEST=Build the Guyrbush mainboard.
Change-Id: I934abad78135260081a61aee4c496b362e483de1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO129 is muxed with KBRST, so setting GPIO129 to low causes reset
when KBRSTEN is set to 1. Since reset value of KBRSTEN is 1 we need a
logic to clear it.
BUG=b:183340503
TEST=build
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I194e8432a14d6105f6bcf12111647f5aad4e2de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This makes the EM100 option visible in Kconfig that makes sure that the
SPI settings that coreboot applies are valid for the EM100 that has some
limitations on the maximum SPI frequency and possibly on the supported
SPI modes. For the PSP SPI settings, the mainboard still might need to
provide EM100-specific settings for EFS_SPI_READ_MODE, EFS_SPI_SPEED and
EFS_SPI_MICRON_FLAG. Haven't checked if those PSP settings are correctly
integrated for Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dec9ce69628ca3623b5009d47f4b3dc020a3dad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add a pad configuration macro to support configuring both wake and
debounce. This support is required by Pen Detect GPIO.
BUG=b:180539900
TEST=Build Guybrush mainboard.
Change-Id: I3343a4e80fd5aa3047d76ff9f91ea57c3763bbca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When the soc_get_mbox_address functions returns 0 after not being able
to find an initialized PSP base address MSR or in case of Stoneyridge
the PSP's BAR3, the code will print an error string. This string needs
to reference both PSP_ADDR_MSR and PSP BAR3 and not only the latter one,
since in Picasso and Cezanne only the former one is present.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32a1e87e2a7d89c7b53f47c987e7bf0556154cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Until now every AML package had to be closed using acpigen_pop_len().
This commit introduces set of package closing functions corresponding
with their opening function names. For example acpigen_write_if()
opens if-statement package, acpigen_write_if_end() closes it.
Now acpigen_write_else() closes previously opened acpigen_write_if(),
so acpigen_pop_len() is not required before it.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Icfdc3804cd93bde049cd11dec98758b3a639eafd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add I2C initialization in romstage and ramstage.
TEST=To test the I2C connection on Majolica, which doesn't have SPD
connection, call the function below after i2c_soc_init is called.
i2c_read_bytes(2, 0x4d, addr, data, 1);/* Read out 1 byte one time */
It can get the register values of TMP432B.
Or
/* Override EC port in ec.h */
#define EC_DATA 0x662
#define EC_SC 0x666
ec_write(0xA9, 0x40);
i2c_read_bytes(1, 0x10, addr, data, 2);/* Read out 2 bytes one time */
It can get the register values of CM32181A3OP(ALS).
Change-Id: I3a2a1494b44b68e8d8204fba0c90e769e0256e6f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51029
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add macros, settings and callbacks to support I2C for cezanne.
Change-Id: Ic480681d4b7c6fb8591e729090e4faeb5fccf800
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The logic behind I2C bus initialization, I2C MMIO base address getter
and setter, I2C bus ACPI name resolution are identical for all the AMD
SoCs. Hence moving all the SoC agnotic parts of the driver into the
common driver and just configure the SoC specific parts into individual
I2C drivers.
BUG=None
TEST=Build Dalboz and Grunt. Boot to OS in Dalboz. Ensure that the I2C
peripherals are detected as earlier in Dalboz. Verify some I2C
peripheral functionality like trackpad and touchscreen.
Change-Id: Ic9c99ec769d7d8ad7e1e566fdf42a5206657183d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Suggested-by: Kyosti Malkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51509
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I2C driver is replicated in each generation of AMD SoCs. Introduce a
common I2C driver that can be used across all the AMD SoCs. To begin
with, peripheral reset functionality is moved into this common driver.
SoC specific I2C driver passes the SCL pin configuration in order for
the common driver to reset the peripherals. More functionality can be
moved here in subsequent changes.
Also sb_reset_i2c_slaves() is renamed as sb_reset_i2c_peripherals() as
an effort towards using inclusive language.
BUG=None
TEST=Build Dalboz and Grunt. Boot to OS in Dalboz. Ensure that the I2C
peripherals are detected as earlier in Dalboz.
localhost ~ # i2cdetect -y 0
Warning: Can't use SMBus Quick Write command, will skip some addresses
0 1 2 3 4 5 6 7 8 9 a b c d e f
00:
10:
20:
30: -- -- -- -- -- -- -- --
40:
50: 50 51 -- -- -- -- -- -- 58 59 -- -- -- -- -- --
60:
70:
localhost ~ # i2cdetect -y 1
Warning: Can't use SMBus Quick Write command, will skip some addresses
0 1 2 3 4 5 6 7 8 9 a b c d e f
00:
10:
20:
30: -- -- -- -- -- -- -- --
40:
50: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60:
70:
Change-Id: I9f735dcfe8375abdc88ff06e8c4f8a6b741bc085
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Suggested-by: Kyosti Malkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
It is currently only used in this translation unit.
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: Ib779a38306fb45320f3e4eb71f63630023d59906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51535
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are currently writing invalid ACPI tables. We are missing the GPP
ACPI names. There is an assert in acpi_device_write_pci_dev that checks
to see if we have a scope, but by default asserts don't halt, so we were
writing a NULL scope.
BUG=b:171234996
TEST=Boot majolica and dump ACPI tables
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6a861ad1b9259ac3b79af76e18a9354997b0491e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch rewrites some parts of the Agesa refcode loader to eliminate
the passing of raw rdevs between functions, so that we can get rid of
cbfs_boot_locate() in favor of more high-level APIs.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2a6e1158ed7425c69c214462bc52e8694a69997a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In pursuit of the eventual goal of removing cbfs_boot_locate() (and
direct rdev access) from CBFS APIs, this patch replaces all remaining
"simple" uses of the function call that can easily be replaced by the
newer APIs (like cbfs_load() or cbfs_map()). Some cases of
cbfs_boot_locate() remain that will be more complicated to solve.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Icd0f21e2fa49c7cc834523578b7b45b5482cb1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The CBFS stage header is part of the file data (not the header) from
CBFS's point of view, which is problematic for verification: in pre-RAM
environments, there's usually not enough scratch space in CBFS_CACHE to
load the full stage into memory, so it must be directly loaded into its
final destination. However, that destination is decided from reading the
stage header. There's no way we can verify the stage header without
loading the whole file and we can't load the file without trusting the
information in the stage header.
To solve this problem, this patch changes the CBFS stage format to move
the stage header out of the file contents and into a separate CBFS
attribute. Attributes are part of the metadata, so they have already
been verified before the file is loaded.
Since CBFS stages are generally only meant to be used by coreboot itself
and the coreboot build system builds cbfstool and all stages together in
one go, maintaining backwards-compatibility should not be necessary. An
older version of coreboot will build the old version of cbfstool and a
newer version of coreboot will build the new version of cbfstool before
using it to add stages to the final image, thus cbfstool and coreboot's
stage loader should stay in sync. This only causes problems when someone
stashes away a copy of cbfstool somewhere and later uses it to try to
extract stages from a coreboot image built from a different revision...
a debugging use-case that is hopefully rare enough that affected users
can manually deal with finding a matching version of cbfstool.
The SELF (payload) format, on the other hand, is designed to be used for
binaries outside of coreboot that may use independent build systems and
are more likely to be added with a potentially stale copy of cbfstool,
so it would be more problematic to make a similar change for SELFs. It
is not necessary for verification either, since they're usually only
used in post-RAM environments and selfload() already maps SELFs to
CBFS_CACHE before loading them to their final destination anyway (so
they can be hashed at that time).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I8471ad7494b07599e24e82b81e507fcafbad808a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since prog_locate() was eliminated, prog_rdev() only ever represents the
loaded program in memory now. Using the rdev API for this is unnecessary
if we know that the "device" is always just memory. This patch changes
it to be represented by a simple pointer and size. Since some code still
really wants this to be an rdev, introduce a prog_chain_rdev() helper to
translate back to that if necessary.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If7c0f1c5698fa0c326e23c553ea0fe928b25d202
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch removes the prog_locate() step for stages and rmodules.
Instead, the stage and rmodule loading functions will now perform the
locate step directly together with the actual loading. The long-term
goal of this is to eliminate prog_locate() (and the rdev member in
struct prog that it fills) completely in order to make CBFS verification
code safer and its security guarantees easier to follow. prog_locate()
is the main remaining use case where a raw rdev of CBFS file data
"leaks" out of cbfs.c into other code, and that other code needs to
manually make sure that the contents of the rdev get verified during
loading. By eliminating this step and moving all code that directly
deals with file data into cbfs.c, we can concentrate the code that needs
to worry about file data hashing (and needs access to cbfs_private.h
APIs) into one file, making it easier to keep track of and reason about.
This patch is the first step of this move, later patches will do the
same for SELFs and other program types.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Picasso APUs advertise 23 MCA banks in the lower byte of the
IA32_MCG_CAP MSR, which is more than the 7 core MCA banks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3e1c8ed437820b350c78b0517e6521582002ee1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The bank names were copied over from Stoneyridge, but they don't match
for Picasso.
TEST=Checked the Picasso PPR.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia86cf3874f8b16b007bad46535af6dafb776fbdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51476
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Needed to get the _SX ASL methods.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6323ba413a21d9d867727dbb28340e6df807c86a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Load VBIOS in pci set_resources to PCI_VGA_RAM_IMAGE_START (0xc0000)
since pci_dev_init() will not load it in GOP case (VGA_ROM_RUN is not
set). Add Cezanne GFX PID.
BUG=b:171234996
BRANCH=Zork
Change-Id: I4a6fea9b6cd60c862e15ed2ed539869c0f9bd363
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This UPD will be used to pass VBIOS buffer pointer to FSP PEI GOP
driver.
BUG=b:171234996
BRANCH=Zork
Change-Id: I0c5d4a9d96e5c3d47e262072b689ed62e59129b3
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49866
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
gpe_configure_sci has a size_t type parameter, so we need to include
types.h instead of stdint.h here.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2879d5cf27c432871a2b9c5c90bdd539b97f9d3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since we have the SMN access block now, rename the SMU mailbox interface
registers to clarify that those are in the SMN register space.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic5b7093f99eabd3c29610072b186ed156f335bd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The SMU mailbox interface gets accessed over the SMN register space, so
factor out those access functions into a separate common code SMN access
building block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabac181972c02ae641da99f47b2aa9aa28dae333
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
