The other enum entries are control IDs for the
ALIB_FUNCTION_DYNAMIC_POWER_THERMAL_CONFIG ALIB function while
DPTC_TOTAL_UPDATE_PARAMS is the total number of configuration settings
that will get passed as parameter in the ALIB call, so it shouldn't be
part of that enum.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0cb9e9d2ba579a74d916011b4ead71cc86d69a24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53916
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ACPI ALIB function numbers are defined in the AMD Generic
Encapsulated Software Architecture (AGESA™) Interface Specification
(document #55483).
TEST=Timeless build stays the same for Mandolin (Picasso) and Gardenia
(Stoneyridge).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I290ef0db32c65ebb2bbbe4f65db4df772b884161
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53915
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCI interrupts are level active low, so they can be shared.
BUG=b:184766519
TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic`
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I439337dd66fe56790406c6d603e73512c806a19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52957
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will allow us to have subdirectories in common/fsp.
BUG=b:184766519
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib3497791e1963867c8fe06a42c111e5d0503ade1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Some designs might wish to use an open drain eSPI ALERT#. This change
adds an enum that allows setting the eSPI alert mode.
BUG=b:187122344, b:186135022
TEST=Boot guybrush using all 3 alert modes
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The eSPI spec says that the Alert Mode defaults to in-band on reset.
This change ensures the controller is in sync with the eSPI peripheral.
The configured alert mode is configured in
espi_set_general_configuration.
BUG=b:187122344, b:186135022
TEST=Boot guybrush and make sure we don't get any eSPI errors.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib43e190d08d77ecfcd22ead2bf42e5de2202b555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52953
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will print the config we are setting on the eSPI peripheral.
e.g.,
Setting general configuration: slave: 0x98a00000 controller: 0xe2000000
eSPI Slave configuration:
CRC checking enabled
Dedicated Alert# used to signal alert event
eSPI quad IO mode selected
Only eSPI single IO mode supported
Alert# pin is open-drain
eSPI 33MHz selected
eSPI up to 20MHz supported
Maximum Wait state: 0
BUG=b:187122344, b:186135022
TEST=Boot guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1a2382d8ab3d3f0d14a139c57470cb895112eca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52952
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We can share this with cezanne.
BUG=b:184766519
TEST=Build picasso
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If746d55345f6b7c828376b64adc5532d20413f68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52916
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This method signature will also be used by cezanne, so move it to
common.
BUG=b:184766519
TEST=Build picasso
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I421bdad51776278f83148174e6f72bdc38249e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
this adds the ALIB SSDT that gets passed from the FSP to coreboot via a
HOB.
BUG=b:185481298
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8a7dae5789eee442b321ddf276494eb53fc5f499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This function will be used to add some SSDTs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia88cb5ea483850a8659f3bae8040c82eb2735d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
If the ACPI table size in the HOB data header is larger than the maximum
HOB payload, don't add the table at all and print an error instead,
since in this case the memcpy would read past the end of the HOB data
structure.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I965c01bd9ab66b14d6f77b6f23c28479ae6d6a50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52897
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function will be reused in Cezanne, so move it from the Picasso
directory to the common FSP integration code.
TEST=On Mandolin Linux finds the AMD SSDT that contains ALIB.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b256de712fe60d1c021cb875aaadec1d331584b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
For CRBs without Google EC with CONFIG_CHROMEOS=y we will get a build
error as google_chromeec_cbi_get_dram_part_num() is not defined. Use
EC_GOOGLE_CHROMEEC instead of CHROMEOS to gate the call.
BUG=b:184124605
Change-Id: I2b200f4fb11513c6fc17a2f0af3e12e5a3e3e5a1
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The usage of external oscillator has got nothing to do with Audio
Co-processor (ACP). Hence move it out of common config and put it into
the SoC config where it is being used.
BUG=None
TEST=Build Dalboz and Vilboz mainboards.
Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add telemetry setting to UPD, the value comes from the SDLE testing.
BUG=b:182754399
TEST=Build & Boot guybrush
Cq-Depend: chrome-internal:3787638
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I9dd3643e9c582a41192130901935eef321b2c67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52733
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We no longer lock up if we clear the port 80 bit. I'm assuming this was
fixed when we configured the PSP to no longer setup eSPI.
BUG=b:183974365
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1530d08974d42e0b06eb783521dea32fca752d85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Temp stack for verstage is only needed for picasso, so make it optional
in the layout file.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I44196103a3531e9d01c96ab8f454c8b580fe9807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
From cezanne we have enough space in PSP so we don't have to worry about
workbuf size. Hence the function only exists in picasso and deprecated
for later platforms.
So wrap svc_get_max_workbuf_size and provide default weak function so
future platforms don't have to implement dumb function for it.
TEST=build and boot zork, check weak function is not called in zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I16e8edf8070aaacb3a6a6a8adc92b44a230c3139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
These addresses will be changed in cezanne. Before start working on
cezanne, move these out to separate header as a clean-up.
TEST=emerge-zork coreboot
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I2499281d250aae701f86bfcc87c7681e5b684b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Audio Co-processor driver is similar for both Picasso and Cezanne SoCs.
Hence move it to the common location.
BUG=None.
TEST=Builds Dalboz, Trembyle, Vilboz, Mandolin and Bilby mainboards.
Change-Id: I91470ff68d1c183df9a2927d71b03371b535186a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
We don't have any infrastructure setup to handle SCI SMIs. Instead of
just silently ignoring the SMI, print a warning saying that it is
being ignored.
BUG=none
TEST=Trigger an SCI SMI and see warning printed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I803e572250925b7d5ffdbb3e8958f9aff1f808df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52674
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Cezanne version of psp_transfer.h lacks some necessary definitions.
Currently we don't have any plan to change transfer buffer structure in
cezanne, so just copy'em over.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I9361c4ab76c8ded06358a7718d5e447c16414721
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52540
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are just copied from picasso one.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I701d6af63b24e86f8e132fad73504e20148a2bf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Like the Picasso platform, it's very useful to have units on these
variables.
BUG=b:185209734
TEST=Build & Boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I592c807c5e9a2c17b1c5959e56a01237352c5204
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
These values will be added in the upcoming STAPM configuration update.
BUG=b:185209734
TEST=Build & Boot guybrush
Cq-Depend: chrome-internal:3780259
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I2a6835c16badfe505e3c33b356ca671766cd6972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: chris wang <Chris.Wang@amd.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
hdmi2_disable bit0~3 is used to disable HDMI 2.0 function in DDI0~3
BUG=b:179170193
BRANCH=none
TEST=Build; Verify the UPD was passed to system integrated table
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Change-Id: I383bfd04e01f5202db093105662344869e475746
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Configure the S0i3 enable UPD based on the mainboard configuration.
BUG=b:178728116
TEST=Build and boot to OS in Guybrush. Enter S0i3 after passing the
sleep state configuration from the mainboard.
Change-Id: I18f43e964d1c70317155394257a5e2c1900816bb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Currently, some of the PSP Soft Fuse bits are hardcoded in the Cezanne
and Picasso makefiles.
This makes it impossible for platforms to change them. This change puts
the hardcoded bits in Kconfig, allowing them to be modified by the
platform.
BUG=b:185514903
TEST=Verify that the correct Soft Fuse bits are set.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I190ebf47cb7ae46983733dc6541776bf19a2382f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52422
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MC0_CTL_MASK is no longer available in fam 17h and newer and will result
in a general protection fault when accessed. This register was moved, so
use the one that is correct for this CPU generation.
BUG=b:186038401
TEST=Mandolin no longer crashes in the machine check error handling path
with a general protection fault.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibb042635d917dfcb2121849e2913aa62eca09dd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add defines for the Machine Check Architecture Extensions (MCAX) MSRs
and the new MCA_CTL_MASK MSRs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id78483e7df00c3e99c698c0344f38be68d1dfb72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Trying to limit the number of available cores by setting the MAX_CPUS
Kconfig option to a lower value than the SoC's default might result in
cores being enabled in the FSP-S, but not fully initialized in coreboot
which will cause some malfunction. Add a static assert to make sure
that this option isn't changed from the default. To limit the maximum
number of cores, use the downcore_mode and disable_smt devicetree
settings instead.
TEST=Build fails if MAX_CPUS isn't the expected default.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3cfe09f8bb89a2154d37a37398df982828c824f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Trying to limit the number of available cores by setting the MAX_CPUS
Kconfig option to a lower value than the SoC's default might result in
cores being enabled in the FSP-S, but not fully initialized in coreboot
which will cause some malfunction. Add a static assert to make sure
that this option isn't changed from the default. To limit the maximum
number of cores, use the downcore_mode and disable_smt devicetree
settings instead.
BUG=b:184162768
TEST=Build fails if MAX_CPUS isn't the expected default.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idd6aa1d99128b17218a8e910c33415218a58578f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52606
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clean up Kconfig and psp_trasfer.h files before copying over to cezanne.
TEST=build, flash and boot on jelboz360
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ib370d93e23c15a2fe4c46051ed3647d2d067bb10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52563
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
if ENV_X86 is not true we had several compile errors in i2c code. Fix
them before we add code for psp_verstage which is non-x86.
BUG=b:182477057
BRANCH=none
TEST=build
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I0796671dd34ab2d0f123c904a88c57cdad116a57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
bl_syscall_public.h is a header file for PSP app, but was used for x86
code to get the definition of PSP_INFO. Move the definition into
psp_transfer.h and do not include bl_syscall_public.h from x86 code.
BUG=none
TEST=build psp_verstage on zork
BRANCH=none
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I0fe011652a47d0ba2939dc31ee3b83f0718a61dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52537
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
size_t is used in the code, so we should include types.h instead of
stdint.h to also have those type definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I04c50de257a2d6982bfd4907eb5a1325a751919a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52582
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add PSP_DISABLE_POSTCODES and PSP_POSTCODES_ON_ESPI kconfig options for
cezanne. Select PSP_DISABLE_DISABLE_POSTCODES and unselect
PSP_POSTCODES_ON_ESPI for guybrush. Port80 codes from PSP can cause bus
errors on guybrush.
BUG=b:185514903, b:184356693
TEST=Boot guybrush, observe no port80 codes from PSP
Change-Id: I7241e47ec1b89782e699135370c796eb251afcaa
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52401
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The linux kernel requires a valid _OSC method. Otherwise the _LPI table
is ignored.
See https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.10/drivers/acpi/bus.c;l=324
Before this patch:
acpi_processor_get_lpi_info: LPI is not supported
After this patch:
acpi_processor_evaluate_lpi: ACPI: \_SB_.CP00: ACPI: Found 4 power states
BUG=b:178728116
TEST=Boot OS and verify _LPI table is parsed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I44e554b9db6f70fdd1559105cdaee53aeb2bfbf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Clarify that the downcoring is about deactivating physical cores.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8a9d1cedff995c507c3be72e7665953e1659238
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Even though the UPD field this information is finally written to is an 8
bit value, the smt_disable option is only a boolean.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaac49944993a28ffb98a80201effe1238ec60875
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52553
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the next patch will use a boolean, replace the stddef.h and
stdint.h includes with types.h to have all that we'll need.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0d062c8de29aa3688a911d7887faf592020b33c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52552
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we use uintX_t, bool and friends, we need to make sure to include
the corresponding definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icb8a6e93d7f1923ac95e584fb3e33c391963f5ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52551
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The name of the and_mask parameter was a bit misleading, due to the
function inverting the value. Renaming this into clear and set makes it
more obvious what those parameters will actually do.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If307ab4858541861e22f8ff24ed178d47ba70fe5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The uPEP device is required to support S0i3. The device has been written
in ASL to make it easier to read and maintain. The device constraints
are purely informational. We use a dummy constraint like the Intel
platforms to keep both linux and Windows functional.
In order for this device to be used by the linux kernel the
ACPI_FADT_LOW_PWR_IDLE_S0 flag must be set. So including it
unconditionally doesn't cause any problems.
The AMD Modern Standby BIOS Implementation Guide defines two UUIDs,
one for getting the device constraints, and one for handling
notifications. This differs from the Intel specification and the linux
driver implementation. For this reason I haven't implemented any of the
notification callbacks yet.
BUG=b:178728116
TEST=Boot OS and verify _DSM is called:
[ 0.226701] lps0_device_attach: ACPI: \_SB_.PEP_: _DSM function mask: 0x3
[ 0.226722] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: _DSM function 1 eval successful
[ 0.226723] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list begin:
[ 0.226724] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list end
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2deef47eabe702efe1a0f3747c9f27bcec37464b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52445
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit ad7c33abd2. With EFS2
already enabled in EC, enabling early EC sync is not required. Also a
workaround has been added in payload to address any boot issues.
BUG=b:185277224
TEST=Build and boot to OS in Guybrush in both normal and recovery mode.
Cq-Depend: chromium:2832032
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I34f8433739754365c8e5a10fdf7e58e3d1e7e797
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52419
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI_BERT_SIZE is used in the FSP driver and the fsp_m_params.c. The
latter one is planned to be deprecated though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id1a250defbd31e255df9b7a7dd8488dc3182649b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since there are some differences between picasso PSP svc and cezanne PSP
svc, each platform should have their own svc wrapper.
Moreover cezanne PSP will drop unused parameters from
update_psp_bios_dir and save_uapp_data so make wrapper around it.
BUG=b:182477057
BRANCH=none
TEST=build psp_verstage and boot on zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I69f998865fc3184ea8900a431924a315c5ee9133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52307
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
psp_verstage is not specific to picasso. There might be picasso-specific
code but move everything into common as a first step. While developing
psp_verstage for cezanne picasso-specific code will move back to picasso
directory.
BUG=b:182477057
BRANCH=none
TEST=build psp_verstage on zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ifb1df0d82b972f28be2ffebd476c2553cbda9810
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The Kconfig value specified Intel instead of AMD.
BUG=b:184198808
TEST=Backlight enabled in the OS
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I9fbdf821591ec886f383c1a5ac197f8f213c4cc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52384
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add generate_cpu_entries to device operations. Add support to
generate cpu p-state and c-state SSDT entries.
BUG=b:184151560
TEST=Dump and verify SSDT entry for CPU p-states and c-states.
Change-Id: I77d8078b94fb661dc045b4184955c8cbec373d12
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add uart controller to chipset.cb and leave it off by default.
Turn uart0 on for console for mainboards.
BUG=none
TEST=builds and boot into OS
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: Iaeb7fea4b92bd89331c7ae7c1c000f8d9961fe9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Needed so we can switch to normal mode.
BUG=b:184126844
TEST=Boot guybrush in developer mode and switch to normal mode.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I26ad160a2372484e9753a727f2b454a31e3537a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
There is no need to stash the SCI trigger register configuration and
apply it at the end. Remove this to make SCI and SMI programming more
symmetrical and to use available configure_scimap function instead of
implementing it again, but without the additional checks. Using this
function also allows removing soc_route_sci.
Change-Id: Ie23da79546858282910db65182a6315ade506279
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The functionality to restore the previous power state after power was
lost that could previously be enabled by selecting
MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved
by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's
Kconfig instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49c4a44ca2c4fa937a823c4eddf1618739c15114
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The functionality to restore the previous power state after power was
lost that could previously be enabled by selecting
MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved
by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's
Kconfig instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab9578ebea89651dc2389bf6ca93ca3f3507eb47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Picasso and Stoneyridge didn't do a read-modify-write operation on the
lower nibble of PM_RTC_SHADOW_REG, but just wrote the upper nibble as
all zeros. Since the upper nibble might be uninitialized before the
lower nibble gets written, do what Picasso and Stoneyridge did here
instead of what the reference code does. Also add a comment why and how
this register behaves a bit weird.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bda2349e3ae84cba50b187cc773fd8a5b17f4e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Not selecting POWER_STATE_DEFAULT_ON_AFTER_FAILURE brings Cezanne that
is currently the only SoC using this functionality in line with Picasso
where the default is that the board remains in power off mode after
power was lost and later restored. Boards can change this behavior by
selecting POWER_STATE_OFF_AFTER_FAILURE, POWER_STATE_ON_AFTER_FAILURE or
POWER_STATE_PREVIOUS_AFTER_FAILURE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic96f40e3c9867cd821e58d752f58b763930f6d0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Without this being selected, mainboards can't select
MAINBOARD_POWER_STATE_PREVIOUS to use the power state restoration code
path in pmlib.c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I753659fa753e03a66b6c6b2eb97e7ef20c71ca57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The prototype of gpio_add_events() is provided by that header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia384c9297ac1e24bf0b1bcce048012a247406f39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52274
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Guybrush complains that this is missing during the boot, so add it to
cezanne. I verified that the registers in gpio.c are correct.
BUG=b:184549804
TEST=Build and boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de3764c99fe89b962db88065575463b365ddaf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Since Cezanne needs the exact same code, move it to the common directory
and add a Kconfig option to add this functionality to the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I04c4295071a3df7afcb4dfd5435b11fb0bf6963f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Verified that all accessed registers exist in all SoCs that use this
code (Carrizo, Mullins, Stoneyridge, Picasso and Cezanne at the moment)
and that the bit definitions match as well. Also at the time of writing
this patch only Picasso calls gpio_fill_wake_state, so dropping the
check won't change behavior. This also avoids having SoC specific code
that doesn't get selected by Kconfig options in the common AMD SoC
directory and also avoids having to add a check for SOC_AMD_CEZANNE to
support this functionality on Cezanne in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If770780a67776daf81744db1b635ffd402653a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52223
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure the power state to return to when the power is re-applied
after power failure.
BUG=b:183739671
TEST=Build and Boot to OS in Majolica and Guybrush. By default when the
power fails the device turns on after power is re-applied. When the
POWER_ON_AFTER_POWER_FAILURE is disabled, the device remains off even
after the power is re-applied.
Change-Id: I21c5da08c82156d6239450ef6921771da74cbaa1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52049
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce a power management library to handle the power resume after
power failure. Enable HAVE_POWER_STATE_AFTER_FAILURE config when this
library is enabled.
BUG=b:183739671
TEST=Build Guybrush and Majolica mainboard.
Change-Id: Iea4ea57d747425fe6714d40ba6e60f2447febf28
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add GRXS and GTXS support. Move the gpio method into common place.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I8ba377179d6976cf26ed0dc521d8e4eff051dc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This override was added to have the SCI mapping configured if GPIO was
used as WAKE_L pin. This however didn't set up the SCI level and trigger
information, so it likely never worked as intended.
Change-Id: I44661f05c8f517ece88714c625603579731d174b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This register is used for masking/unmasking eSPI IRQs.
BUG=none
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia209539b2e0ce390e227757b16c2969b9124a845
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52142
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the functionality to write the DXIO and DDI descriptors
to the UPD data structure to the SoC code and adds the
mainboard_get_dxio_ddi_descriptors function to each mainboard using the
Cezanne SoC that gets called to get the descriptors from the board code.
Change-Id: I1cb36addcf0202cd56ce99e610a13d6d230bc981
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The UPD header files get generated as part of the FSP build process. For
the initial Cezanne development we took the Picasso UPD data structures
as a starting point. This patch replaces it with the first version of
the Cezanne-specific UPD data structures that is present in version 12
of the internal work-in-progress FSP binary drops.
The serial_port_stride UPD-M field is removed, since the information is
already given by serial_port_use_mmio. The stride is 4 bytes for the
MMIO UART case and 1 byte for the legacy I/O case.
BUG=b:182524631
TEST=NVMe works on google/guybrush when the rest of the patch train is
applied as well.
Change-Id: Idca235029bf2e68d403230d55308820cab61a6c0
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This is a copy of picasso.
BUG=b:184151560
TEST=Compared with the cezanne PPR.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia4bc40daa971c126c2596837155312d411b91a06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
espi_setup already clears most of the controller registers. So this
change consolidates the clear logic into one spot.
This shouldn't result in a behavior change on Picasso. Picasso already
has the eSPI decodes clear on boot, so this change is a nop.
BUG=b:183524609
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic57689e50febd29796d8ac8d99c81e41fee5b41c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This is only ever called after espi_setup.
55861 - AMD System Peripheral Bus Overview also says that io ranges
should be configured before enabling the BUS_MASTER bit.
BUG=b:183524609
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I074e487d8768a578ee889a125b9948e3aa6c7269
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tidy up the interrupt status. This will leave SLAVE0_INT_STS = 0.
BUG=b:183524609
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I950cfb81521e35758c120a482670cfdb924201d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52056
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This sets the eSPI registers to the reset values specified in the PPR.
On Cezanne, the PSP modifies these registers such that the eSPI
peripheral cannot send DEFER packets. This causes random bus errors.
These reset values are identical to what is currently used on Zork.
I didn't clear out ESPI_DECODE because it's currently being done by
cb:51749.
BUG=b:183524609
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic3a9860747aac78121358b4499d8a38052236c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These are defined in the public Picasso PPR - 55570-B1 Rev 3.15.
BUG=b:183524609
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7e601f767327e0a24a086146623af039388b2e7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52057
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Cezanne PSP configures the eSPI with the assumption that it's a
majolica, setting up both the serial port and the majolica EC IO decode
ranges. Since guybrush is NOT a majolica, this doesn't work very well
there. Clearing the decode ranges allows the guybrush platform to set
the decode ranges needed for its EC.
BUG=b:183524609
TEST=Set up eSPI on Guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I77cfb948cb9ae6d1cf001bd9e66cede8d93f50b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Previously, the eSPI code would only add to existing decode ranges, and
there wasn't any way to clear ranges. This clears all the ranges so
the eSPI configuration can start fresh.
BUG=b:183207262, b:183974365
TEST=Verify on Guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ic4e67c40d34915505bdd5b431a064d2c7b6bbc70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Ideally we would like to perform EC Software Sync in payload. But with
the hardware requirement (EC_IN_RW) and firmware requirement (TPM
command to get EC execution environment) not met yet, adding the support
to perform early EC Software sync. With EFS2 enabled, this will also
help cr50 to set the boot mode as NORMAL instead of NO_BOOT.
BUG=None
TEST=Build and Boot to OS in Guybrush. Ensure that the EC software sync
is successfully complete.
CBFS: Found 'ecrw.hash' @0x50400 size 0x20 in mcache @0x020171ec
VB2:check_ec_hash() Hexp RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
VB2:check_ec_hash() Hmir: 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
<snip>
VB2:check_ec_hash() Heff RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
VB2:sync_ec() select_rw=RW(active)
Change-Id: I820e651c6b22a833fef6f17a4ceb5a8cfb6f1616
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Needed so we write the correct resource into the ACPI tables.
BUG=b:183737011
TEST=Boot OS and see GPIO devices working
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2ba4349e0ed500912db40aa6ef9b649046f4358f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51961
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the cr50 on guybrush to show up in ACPI.
BUG=b:183737011
TEST=Boot OS and see I2C devices initialized
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifb5679b7bbefbf753217981874bb1bdaef35f6db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51958
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pci_rom_ssdt reloads the oprom from cbfs. It then places it into cbmem
and writes the offsets as the ROM ACPI node. The GOP driver modifies the
VBIOS so we don't want to reread from cbfs. When using GOP we also pass
the offsets with the VFCT table.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaf53e750564f1f0e115cd354790da62e672d74b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The coordtype parameter of acpigen_write_CSD_package expects a CSD_coord
enum value, but HW_ALL that got passed as parameter is a PSD_coord enum
value, so replace that with the correct CSD_HW_ALL enum value.
TEST=Timeless build results in identical binary for Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Found-by: Paul Menzel <pmenzel@molgen.mpg.de>
Change-Id: I90b19345b8dc6d386b6acfa81c6c072dcd6981ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Causing the AOAC register access as part of system suspend (S3) causes
the suspend procedure to be stuck. Comment it for now to unblock
entering S3 and collecting the power numbers.
BUG=b:181766974
TEST=Build and boot to OS in Majolica. Enter S3 through "echo mem >
/sys/power/state".
Change-Id: Ie93bbe393b209b784b9a2257f3916b29d84b25d1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51926
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the format warning below by using `PRIxPTR`, which is defined as
unsigned long.
src/soc/amd/common/block/smbus/smbus.c:33:56: error: format specifies type 'size_t' (aka 'unsigned int') but the argument has type 'uintptr_t' (aka 'unsigned long') [-Werror,-Wformat]
printk(BIOS_ERR, "Invalid SMBus or ASF base %#zx\n", mmio);
~~~~ ^~~~
%#lx
src/include/console/console.h:60:61: note: expanded from macro 'printk'
#define printk(LEVEL, fmt, args...) do_printk(LEVEL, fmt, ##args)
~~~ ^~~~
1 error generated.
Change-Id: I727c490d3097dcf36cdbcd4db2852cd49d11785f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move the parts of romstage.c that populate the UPD-M data structure to
the newly created fsp_m_params.c file. Since
platform_fsp_memory_init_params_cb gets called from the FSP driver and
not directly from car_stage_entry the two code parts in romstage.c
weren't directly interacting.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1f7f5879ac318372042ff703ebbe584ce1c32c91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Move the parts of romstage.c that populate the UPD-M data structure to
the newly created fsp_m_params.c file. Since
platform_fsp_memory_init_params_cb gets called from the FSP driver and
not directly from car_stage_entry the two code parts in romstage.c
weren't directly interacting. Since soc/romstage.h only contains the
mainboard_updm_update function prototype, rename it to soc/fsp.h. This
patch also removes a few unused includes.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This file populates the UPD-S data structure that gets passed to the
FSP-S, so add that s part to make it a bit clearer which FSP parameters
it'll set up. This is also a preparation to add a fsp_m_params.c file in
the following patches.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53786df0909055e66eac675b5580909b7960944f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The KBRST_L pin will cause a reset when driven or pulled low even when
the GPIO mux is set to GPIO and not native function. So when you want to
use that pin as general purpose output the keyboard reset input
functionality needs to be disabled by selecting this option in the
board's Kconfig file to avoid causing a reset by writing a 0 to the
output level bit when it's configured as an output.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Furquan Shaikh <furquan@google.com>
Change-Id: I517ad551db9321f26afdba15d97ddb61be1f7d51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51757
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=none
TEST=Build guybrush and verified with the PPR that the register and bits
are still the same
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0619f84cf82cbb90ded9dfd58afa6acc9520fb8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TEST=Verified that this register and the defined bits exist in Cezanne,
Picasso, Stoneyridge, Bolton and SB800.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32d1d577b05edab006981516a5aefd822e7b984a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds a pin configuration macro that supports both switching a
pin to its native function and configuring it as a SCI source. This is a
preparation to remove the GPIO2 soc_gpio_hook.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If0da5c010f35fd902f6b8857368daec93c12394a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50373
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to use a fixed-width type here.
Change-Id: I727c64661990040db356c5508fecc0a65960c095
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51794
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The correct printf format specifier for an `unsigned int` is `%u`.
Change-Id: Iaf780eb366f8c3493b89beb9a5643fa285e7825d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51793
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit 4f87ae1d4a introduced a regression
in the I2C initialization resulting in soc_i2c_misc_init never getting
called, since the continue statement was indented like it belonged to
the if above, but due to the missing curly braces it was outside the if
block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Found-by: Coverity CID 1451395, 1451387
Change-Id: Id1f17ad59cba44e96881f5511df303ae90841ab3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51786
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a helper bit mask to enable wake from either S0i3 or S3.
BUG=None
TEST=Build the Guyrbush mainboard.
Change-Id: I934abad78135260081a61aee4c496b362e483de1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO129 is muxed with KBRST, so setting GPIO129 to low causes reset
when KBRSTEN is set to 1. Since reset value of KBRSTEN is 1 we need a
logic to clear it.
BUG=b:183340503
TEST=build
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I194e8432a14d6105f6bcf12111647f5aad4e2de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This makes the EM100 option visible in Kconfig that makes sure that the
SPI settings that coreboot applies are valid for the EM100 that has some
limitations on the maximum SPI frequency and possibly on the supported
SPI modes. For the PSP SPI settings, the mainboard still might need to
provide EM100-specific settings for EFS_SPI_READ_MODE, EFS_SPI_SPEED and
EFS_SPI_MICRON_FLAG. Haven't checked if those PSP settings are correctly
integrated for Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dec9ce69628ca3623b5009d47f4b3dc020a3dad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add a pad configuration macro to support configuring both wake and
debounce. This support is required by Pen Detect GPIO.
BUG=b:180539900
TEST=Build Guybrush mainboard.
Change-Id: I3343a4e80fd5aa3047d76ff9f91ea57c3763bbca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When the soc_get_mbox_address functions returns 0 after not being able
to find an initialized PSP base address MSR or in case of Stoneyridge
the PSP's BAR3, the code will print an error string. This string needs
to reference both PSP_ADDR_MSR and PSP BAR3 and not only the latter one,
since in Picasso and Cezanne only the former one is present.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32a1e87e2a7d89c7b53f47c987e7bf0556154cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Until now every AML package had to be closed using acpigen_pop_len().
This commit introduces set of package closing functions corresponding
with their opening function names. For example acpigen_write_if()
opens if-statement package, acpigen_write_if_end() closes it.
Now acpigen_write_else() closes previously opened acpigen_write_if(),
so acpigen_pop_len() is not required before it.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Icfdc3804cd93bde049cd11dec98758b3a639eafd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add I2C initialization in romstage and ramstage.
TEST=To test the I2C connection on Majolica, which doesn't have SPD
connection, call the function below after i2c_soc_init is called.
i2c_read_bytes(2, 0x4d, addr, data, 1);/* Read out 1 byte one time */
It can get the register values of TMP432B.
Or
/* Override EC port in ec.h */
#define EC_DATA 0x662
#define EC_SC 0x666
ec_write(0xA9, 0x40);
i2c_read_bytes(1, 0x10, addr, data, 2);/* Read out 2 bytes one time */
It can get the register values of CM32181A3OP(ALS).
Change-Id: I3a2a1494b44b68e8d8204fba0c90e769e0256e6f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51029
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add macros, settings and callbacks to support I2C for cezanne.
Change-Id: Ic480681d4b7c6fb8591e729090e4faeb5fccf800
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The logic behind I2C bus initialization, I2C MMIO base address getter
and setter, I2C bus ACPI name resolution are identical for all the AMD
SoCs. Hence moving all the SoC agnotic parts of the driver into the
common driver and just configure the SoC specific parts into individual
I2C drivers.
BUG=None
TEST=Build Dalboz and Grunt. Boot to OS in Dalboz. Ensure that the I2C
peripherals are detected as earlier in Dalboz. Verify some I2C
peripheral functionality like trackpad and touchscreen.
Change-Id: Ic9c99ec769d7d8ad7e1e566fdf42a5206657183d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Suggested-by: Kyosti Malkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51509
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I2C driver is replicated in each generation of AMD SoCs. Introduce a
common I2C driver that can be used across all the AMD SoCs. To begin
with, peripheral reset functionality is moved into this common driver.
SoC specific I2C driver passes the SCL pin configuration in order for
the common driver to reset the peripherals. More functionality can be
moved here in subsequent changes.
Also sb_reset_i2c_slaves() is renamed as sb_reset_i2c_peripherals() as
an effort towards using inclusive language.
BUG=None
TEST=Build Dalboz and Grunt. Boot to OS in Dalboz. Ensure that the I2C
peripherals are detected as earlier in Dalboz.
localhost ~ # i2cdetect -y 0
Warning: Can't use SMBus Quick Write command, will skip some addresses
0 1 2 3 4 5 6 7 8 9 a b c d e f
00:
10:
20:
30: -- -- -- -- -- -- -- --
40:
50: 50 51 -- -- -- -- -- -- 58 59 -- -- -- -- -- --
60:
70:
localhost ~ # i2cdetect -y 1
Warning: Can't use SMBus Quick Write command, will skip some addresses
0 1 2 3 4 5 6 7 8 9 a b c d e f
00:
10:
20:
30: -- -- -- -- -- -- -- --
40:
50: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60:
70:
Change-Id: I9f735dcfe8375abdc88ff06e8c4f8a6b741bc085
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Suggested-by: Kyosti Malkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
It is currently only used in this translation unit.
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: Ib779a38306fb45320f3e4eb71f63630023d59906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51535
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are currently writing invalid ACPI tables. We are missing the GPP
ACPI names. There is an assert in acpi_device_write_pci_dev that checks
to see if we have a scope, but by default asserts don't halt, so we were
writing a NULL scope.
BUG=b:171234996
TEST=Boot majolica and dump ACPI tables
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6a861ad1b9259ac3b79af76e18a9354997b0491e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch rewrites some parts of the Agesa refcode loader to eliminate
the passing of raw rdevs between functions, so that we can get rid of
cbfs_boot_locate() in favor of more high-level APIs.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2a6e1158ed7425c69c214462bc52e8694a69997a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In pursuit of the eventual goal of removing cbfs_boot_locate() (and
direct rdev access) from CBFS APIs, this patch replaces all remaining
"simple" uses of the function call that can easily be replaced by the
newer APIs (like cbfs_load() or cbfs_map()). Some cases of
cbfs_boot_locate() remain that will be more complicated to solve.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Icd0f21e2fa49c7cc834523578b7b45b5482cb1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The CBFS stage header is part of the file data (not the header) from
CBFS's point of view, which is problematic for verification: in pre-RAM
environments, there's usually not enough scratch space in CBFS_CACHE to
load the full stage into memory, so it must be directly loaded into its
final destination. However, that destination is decided from reading the
stage header. There's no way we can verify the stage header without
loading the whole file and we can't load the file without trusting the
information in the stage header.
To solve this problem, this patch changes the CBFS stage format to move
the stage header out of the file contents and into a separate CBFS
attribute. Attributes are part of the metadata, so they have already
been verified before the file is loaded.
Since CBFS stages are generally only meant to be used by coreboot itself
and the coreboot build system builds cbfstool and all stages together in
one go, maintaining backwards-compatibility should not be necessary. An
older version of coreboot will build the old version of cbfstool and a
newer version of coreboot will build the new version of cbfstool before
using it to add stages to the final image, thus cbfstool and coreboot's
stage loader should stay in sync. This only causes problems when someone
stashes away a copy of cbfstool somewhere and later uses it to try to
extract stages from a coreboot image built from a different revision...
a debugging use-case that is hopefully rare enough that affected users
can manually deal with finding a matching version of cbfstool.
The SELF (payload) format, on the other hand, is designed to be used for
binaries outside of coreboot that may use independent build systems and
are more likely to be added with a potentially stale copy of cbfstool,
so it would be more problematic to make a similar change for SELFs. It
is not necessary for verification either, since they're usually only
used in post-RAM environments and selfload() already maps SELFs to
CBFS_CACHE before loading them to their final destination anyway (so
they can be hashed at that time).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I8471ad7494b07599e24e82b81e507fcafbad808a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since prog_locate() was eliminated, prog_rdev() only ever represents the
loaded program in memory now. Using the rdev API for this is unnecessary
if we know that the "device" is always just memory. This patch changes
it to be represented by a simple pointer and size. Since some code still
really wants this to be an rdev, introduce a prog_chain_rdev() helper to
translate back to that if necessary.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If7c0f1c5698fa0c326e23c553ea0fe928b25d202
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch removes the prog_locate() step for stages and rmodules.
Instead, the stage and rmodule loading functions will now perform the
locate step directly together with the actual loading. The long-term
goal of this is to eliminate prog_locate() (and the rdev member in
struct prog that it fills) completely in order to make CBFS verification
code safer and its security guarantees easier to follow. prog_locate()
is the main remaining use case where a raw rdev of CBFS file data
"leaks" out of cbfs.c into other code, and that other code needs to
manually make sure that the contents of the rdev get verified during
loading. By eliminating this step and moving all code that directly
deals with file data into cbfs.c, we can concentrate the code that needs
to worry about file data hashing (and needs access to cbfs_private.h
APIs) into one file, making it easier to keep track of and reason about.
This patch is the first step of this move, later patches will do the
same for SELFs and other program types.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Picasso APUs advertise 23 MCA banks in the lower byte of the
IA32_MCG_CAP MSR, which is more than the 7 core MCA banks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3e1c8ed437820b350c78b0517e6521582002ee1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The bank names were copied over from Stoneyridge, but they don't match
for Picasso.
TEST=Checked the Picasso PPR.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia86cf3874f8b16b007bad46535af6dafb776fbdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51476
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Needed to get the _SX ASL methods.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6323ba413a21d9d867727dbb28340e6df807c86a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Load VBIOS in pci set_resources to PCI_VGA_RAM_IMAGE_START (0xc0000)
since pci_dev_init() will not load it in GOP case (VGA_ROM_RUN is not
set). Add Cezanne GFX PID.
BUG=b:171234996
BRANCH=Zork
Change-Id: I4a6fea9b6cd60c862e15ed2ed539869c0f9bd363
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This UPD will be used to pass VBIOS buffer pointer to FSP PEI GOP
driver.
BUG=b:171234996
BRANCH=Zork
Change-Id: I0c5d4a9d96e5c3d47e262072b689ed62e59129b3
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49866
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
gpe_configure_sci has a size_t type parameter, so we need to include
types.h instead of stdint.h here.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2879d5cf27c432871a2b9c5c90bdd539b97f9d3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since we have the SMN access block now, rename the SMU mailbox interface
registers to clarify that those are in the SMN register space.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic5b7093f99eabd3c29610072b186ed156f335bd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The SMU mailbox interface gets accessed over the SMN register space, so
factor out those access functions into a separate common code SMN access
building block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabac181972c02ae641da99f47b2aa9aa28dae333
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Even though the implementation is different on Stoneyridge compared to
Picasso and Cezanne, the function prototypes are identical, so move them
to the AMD SoC common reset header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d3a3a9ea568ea18658c49612efabdbe36d5f957
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
PSP_SHAREDMEM_BASE made the assumption that _psp_sharedmem_dram would
only match once. With CB:49332 there are now two symbols, and it was
grabbing the wrong one.
This change makes it so we match the exact symbol. It also switches to
using awk to simplify the code.
The bootblock.elf target that is added to the list of prerequisites also
creates the bootblock.map file that gets used to extract the base
address of the _psp_sharedmem_dram symbol.
BUG=b:181354692
TEST=Boot zork past bootblock
Fixes: 82d16b150c ("memlayout: Store region sizes as separate symbols")
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79675bd73f964282b54bca858830e26de64037c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Some of the previous binaries were incorrect and should not be used
for Majolica because they are templates instead of APCBs specifically
built for the board. This APCB update also places the UMA region under
4G and size 32 MB which is essential for video output.
TEST=Boot with UEFI BIOS and verify we can get to OS. Also verify memory
region size, base and alignment.
Change-Id: Id797e2ad5bd67815c09752aedc19dad7dcf8ad12
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Even though AMD does not need VBT we still need to implement the
vbt_get() function to not break the build with GOP driver enabled
(see fsps_return_value_handler() in fsp2_0/silicon_init.c
BUG=b:171234996
BRANCH=Zork
Change-Id: I80a5131a9852a05998b55b847243748d24cf535f
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add the UPD updating hook in early stage for customization.
BUG=b:117719313
BRANCH=zork
TEST=build,check the hook function been executed.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I4954a438a51b29b086015624127e651fd06f971b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51181
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This also replaces the southbridge_ prefix of the handler functions with
a handle_ prefix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib6ea1f4e2700c508a8bf72c488043e276ba4a062
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51354
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This file is common for all the AMD platforms.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I10ee600b4bcd7aaff39bfab075eb4dbc9096b435
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51299
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mainboards can configure gpios in their smihandler.
BUG=b:180507707
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I6c2b28f981f580cfb6f982a2d7e4c309d6f82e0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change will allow for GEVENTs to be used in ASL code.
BUG=b:180507937
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I77abd134555c21a32a302ee92cd080284cd2e634
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With the aliases some of the comments are redundant. I'm still not sure
if the Ethernet controller on the embedded SKUs supports 10G or only 1G.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1e432c12f92a622f8ee05be19acb2c304dd74afb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Since the support for the GSMI ELOG isn't implemented in the SMI handler
yet, the corresponding code isn't added to fch_slp_typ_handler in this
patch.
BUG=b:181766974
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia27b2486dde1a373607ce895a975e873d9026ba1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Renoir/Cezanne have two SATA controllers with 2 ports each, so call them
sata_0 and sata_1.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ebfd3a85f9b513901f205bc299e92564fa329e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51190
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The legacy DMA is not used by linux. This change frees up those IO
ports.
When FSP-S runs, it re-enables the legacy DMA IO region, so we need to
disable it again.
BOOTBLOCK: PMx00: 0xe3060bf3
ROMSTAGE - Before FSP: PMx00: 0xe3060bf3
ROMSTAGE - After FSP: PMx00: 0xe3060bf7
BUG=b:180949454
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7792d1f8ea40eb1c7f6cca67e9907208884ac694
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51076
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The serirq enable bit defaults to true, so if we want it disabled, we
need to explicitly disable it.
BUG=b:180631748
TEST=Boot majolica and see spurious IRQ 9 gone.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7f1e18f836f29cb75334dd88c91ad047f5bdfb10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
With this change NMI works in the kernel:
----------------
| NMI testsuite:
--------------------
remote IPI: ok |
local IPI: ok |
--------------------
Good, all 2 testcases passed! |
---------------------------------
See setup_lapic() for where this gets configured.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia391ec5a015d909462ff8aaf3cb047c6fd45fe0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
This causes the linux kernel to complain:
32/64X address mismatch in FADT/Pm1aEventBlock: 0x00000400/0x00000000FED80800
32/64X address mismatch in FADT/Pm1aControlBlock: 0x00000404/0x00000000FED80804
32/64X address mismatch in FADT/PmTimerBlock: 0x00000408/0x00000000FED80808
32/64X address mismatch in FADT/Gpe0Block: 0x00000420/0x00000000FED80814
The linux kernel also verifies that the PM Timer block only uses IO
ports.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I612b6bfb67d8559127ab2ee8a2fb828493820e31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Printing this in both bootblock and romstage is redundant, since the CPU
family and model aren't expected to change between bootblock and
romstage entry.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Change-Id: Id7c6aea0d8a6dac39114593584e534661faea89d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The device function is missing in the PCI device table in the PPR, but
is present in the hardware. Verified on a Mandolin board with PCO APU.
The corresponding ticket for the PPR is DESPCSOC-6667.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie91438bc905691d443ca4e7841549d1e3bca39ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The PSP soft fuse bit 6 doesn't do what the comment above it says. See
NDA document #55758 for details.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic84cf6e1eee30af92cd700dc4bf78290143bf88b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Picasso currently declares the BAR region between TOM and IO_APIC_ADDR.
This region includes MMCONF. We don't want to map any PCI BARs in this
region. This also matches what intel does.
See soc/intel/braswell/acpi/southcluster.asl for an example.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9474fd6ac75a7245b3c35151c38186e913219bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This differs slightly from picasso. The PCI BAR region is between TOM1
and CONFIG_MMCONF_BASE_ADDRESS. This matches what the Intel platforms
are doing. It also matches what linux derives from the e820 tables:
> [mem 0xd0000000-0xf7ffffff] available for PCI devices
Picasso currently declares the region between TOM and IO_APIC_ADDR.
This region includes MMCONF. We don't want to map any PCI BARs in this
region.
TEST=Boot majolica and check logs
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [bus 00-3f]
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4ff02012795e2166e3a4197071b1136727089318
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50893
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will also be used for cezanne. Stoney also has a similar function,
but it hard codes the scope path. I didn't have a device setup to test
if switching to this function was a no-op. So I left it.
TOM2 isn't used by any ASL, so we could remove it later.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7c8f476a7735fea61a3244b97988e3ead3b42e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The devices were copied from picasso with the following modifications:
* UART{2,3} were deleted
* I2C{0,1} were added
* eMMC was removed since it hasn't been validated
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iddfb975e9292785d0951dd7bb31c1997d2185abd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Variable OSVR had a static value of 3 and OSFL() did not
actually call _OSI or _OS methods.
The conditional in HDA _INI method of OSVR is dropped and
use of DMA NoSnoop attribute remains disabled to retain
previous behaviour. For soc/amd/picasso a different decision
was made in CB:40782 as HDA _INI method was just dropped and
default configuration enables use of DMA NoSnoop attribute.
Change-Id: I967b7b2afbb43253cccb4b77f6c44db45e2989e4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50592
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CB:40785 ("soc/amd/hda: Move HDA PCI device from DSDT to SSDT") moved
the HDA device in ACPI from DSDT to SSDT. During this, _INI method
generated in SSDT incorrectly inverted the values for NSEN, NSDO and
NSDI. This change fixes the mistake so that the _INI in SSDT matches
the original _INI in DSDT for HDA device.
Change-Id: I294b561a479b77ab8afb5f3e0de367ad24f3a764
Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This adds the SMM finalization to Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a2b433d92df2a76979e2e6a3d1dde996303ba78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50801
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The new name is more consistent with the rest of the MSR definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5666d9837c61881639b5f292553a728e49c5ceb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50855
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch changes the memlayout macro infrastructure so that the size
of a region "xxx" (i.e. the distance between the symbols _xxx and _exxx)
is stored in a separate _xxx_size symbol. This has the advantage that
region sizes can be used inside static initializers, and also saves an
extra subtraction at runtime. Since linker symbols can only be treated
as addresses (not as raw integers) by C, retain the REGION_SIZE()
accessor macro to hide the necessary typecast.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ifd89708ca9bd3937d0db7308959231106a6aa373
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Calling data_fabric_write32 with BROADCAST_FABRIC_ID as instance_id
would have caused an infinite recursion, so call the right function
data_fabric_broadcast_write32 for that case instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If7f0a80f0430e8bfb29ee510ef86c278e3a42063
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This reverts commit 64d0ad347b. In the
current revision 3.001 of the PPR #56569 the register exists and the bit
definitions match.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie7a97843c3dac897f79f229b660b7e30b34eef93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
We were missing this, so we ran into the scope assert in
acpi_device_write_pci_dev for the data fabric PCI devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I566791527ba839ba52ec5fa28f0f6c25f547d1da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50815
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that all ACPI names are moved to the corresponding PCI devices, the
functionality in the chip code isn't needed any more.
TEST=No warnings or errors on coreboot console or in the Linux ACPI
parser.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d39b6d4bd53cd0ca189fb6f55ca26dab68793fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50822
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function isn't used outside of the same compilation unit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I332046341bc7a5a499355f2147296e8c09d7e0ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50817
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=Boot majolica to linux and see IO-APIC logs
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 16, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib8094c3edf401659d9d740e2cc6266ddd5f91da9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since all bridges to the internal buses have the same PCI ID, we can
just add this one ID to the pci_driver struct and don't need to use a
list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice024b91f49f03995acbd8dfc8b33d3ae3559dde
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50804
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without the cast the left shift is done on a 32 bit variable that gets
extended to 64 bits afterwards which results in missing MSBs. To avoid
this, do the cast to 64 bits before the left shift.
Found-by: Coverity CID 1443793, 1443794
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7cfa5b9b6ad71f36445ae2fa35140a8713288267
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This was replaced by APM_CNT defined in src/include/cpu/x86/smm.h, so
remove the now unused definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibd25dcdb57de14fe42352f01067cedca53712d56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
n is the default of bool Kconfig options, so no need to have that added
to each option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8775d84caee6fda95eb7749e96090fe05417e764
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50779
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I also removed the unnecessary #include in soc.asl.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifbd79871fd49b18f45d97f64ccd68fa96eaaebce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50572
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes the undefined reference for NVB0, NVB1, and NVB2.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib4ba24b66b9ae7899ccd40f91cdd23074f6afc4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
With chipset_power_state filled in romstage CBMEM hooks and
GNVS allocated early in ramstage, GNVS wake source is now
also filled for normal boot path.
Change-Id: I2d44770392d14d2d6e22cc98df9d1751c8717ff3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Additionally to the PCI IDs of Cezanne it also handles the Renoir ones.
The main difference between those two is that Renoir has two core
complexes while Cezanne only has one core complex. I haven't seen
incompatible changes between those two though, so for example the fabric
IDs are the same and the one that's only present in Renoir is just not
used in Cezanne. Also adding the ACPI parts for those don't have
anything to do with those differences.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b2517bc15d872f41183a33857333f1972ff2cb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
When USE_PSPSECUREOS isn't selected, we get stuck in FSP-S.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I60d0e5ab0bd9f4d76cc48d08ca05d27c60e898c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
I'm not 100% sure yet if this code will be common for all AMD SoCs, so
I'll add a copy for Cezanne for now. This part of the code should
probably be reworked after the initial bringup of Cezanne anyway.
DF MMIO register configuration at the beginning of
data_fabric_set_mmio_np:
=== Data Fabric MMIO configuration registers ===
Addresses are shifted to the right by 16 bits.
idx control base limit
0 a3 fc00 febf
1 a3 1000000 fffcffff
2 a3 d000 f7ff
3 a0 0 0
4 a3 fed0 fed0
5 a0 0 0
6 a0 0 0
7 a0 0 0
DF MMIO register configuration at the end of data_fabric_set_mmio_np:
=== Data Fabric MMIO configuration registers ===
Addresses are shifted to the right by 16 bits.
idx control base limit
0 a3 fc00 febf
1 a3 1000000 fffcffff
2 a3 d000 f7ff
3 10a3 fed0 fedf
4 a0 0 0
5 a0 0 0
6 a0 0 0
7 a0 0 0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia243a0cad311eb210d14d6242c52f599db22515c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50624
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The number of data fabric MMIO registers is SoC-specific, so we need to
keep that in the SoC code. This also removes a redundant pair of
brackets and moves a loop counter declaration into the head of the loop.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8499f1c1f7bf6849b5955a463de2e06962d5de68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50638
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The exact same mechanism is used on Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3179d8ec35efa29f9bc66854c3690b389d980bba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50619
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix regression with commit aa969e887a ACPI: Move PICM declaration.
While mentioned in the commit message there already, the default
value for AMD boards changed from IOAPIC mode to PIC mode.
ACPI 6.3 spec has this text regarding _PIC method:
If the platform CPU architecture supports PIC mode and the method
is never called, the platform runtime firmware must assume PIC mode.
If MADT has IOAPIC entries, OS will want to change to APIC model. But
the method _PIC was not in the global scope so it could not be called
and therefore _PRT continued to report PIC model interrupt routing.
Already fixed for soc/amd/picasso in commit 839f668.
Change-Id: I7f3bb0d45946cec315694de1d540fea4d828348e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This will be common for all boards, so move it to the chipset device
tree.
TEST=CPU cluster and LAPIC still show up in console logs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia49e7b4cfc09c60b6152b8ccc47f37b6adc1e319
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50613
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MADT doesn't populate the IO-APICs yet since we need FSP to
configure those.
The FADT differs from picasso in the following ways:
* The duty_offset is supposed to be 0
* Don't clear x_firmware_ctl_l
* Make the extended addresses use MMIO
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib6c3a01084a0de33894885b47c637a292d252ed4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
TEST=Boot majolica and see microcode update
CBFS: Found 'cpu_microcode_blob.bin' @0x6900 size 0x15c0 in mcache @0xcf7fe9d8
microcode: patch id to apply = 0x0a50000b
microcode: being updated to patch id = 0x0a50000b succeeded
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If50b1d8b3ebf4b3e6f8a9dd3ab96073e0cb92424
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We also want to support uCode loading on cezanne.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6f10564c93ce72aea7ff52a8565d65d8b56452f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
