With cr50 fw 0.3.22 or older version, it needs to disable autonomous
GPIO power management and then can update cr50 fw successfully.
BUG=b:202246591
TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage.
Change-Id: Idc01ebb4d3ef990f24f18bef5424b7d6ba683d49
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
libcbfs has a workaround to avoid writing to ROM areas:
/* Hacky way to not load programs over read only media. The stages
* that would hit this path initialize themselves. */
if ((ENV_BOOTBLOCK || ENV_SEPARATE_VERSTAGE) &&
!CONFIG(NO_XIP_EARLY_STAGES) && CONFIG(BOOT_DEVICE_MEMORY_MAPPED)) {
This workaround is not triggered in QEMU, because
BOOT_DEVICE_MEMORY_MAPPED is only selected for SPI boot devices. This
results in confusing (to the VMM developer) writes to read-only
memory.
As far as I can tell, this issue is weird but harmless, because the
code does memcpy to ROM with source == destination. The concensus in
the mailing list thread [1] was that it's worthwhile to be fixed
regardless.
[1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/KDI6YQCPXSQF4NDUAAC7TIXQKSZ6T4X7/
Change-Id: I5cefbc31f917021236105f7dc969118d612ac399
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The "internal audio connection" setting is actually about the front
panel audio. Rename functions and variables to reflect this.
Change-Id: I1be8f68ac3e8b91bc4983dc06daa37afb7bdf926
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
ADL-M has its own set of VBT files to pick during execution,
this will avoid any conflict with other ADL variants.
VBT files added at chrome-internal:4138272
BUG=None
TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ibbf3f11c9277f5dcb3e12f9020f54ec843444c3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Add Kconfig item ENABLE_TCSS_DISPLAY_DETECTION.
TEST=Build with the VBT provided in issue b:199490251. Check the dev screen in bios-stage.
BUG=b:199490251, b:206014054
Signed-off-by: Adam Liu <adam.liu@quanta.corp-partner.google.com>
Change-Id: I5f34be030a6d819a0e93a2d479c4ff41bb14cfe2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Added fw_config_probe method to distinguish different audio codecs to
facilitate the use of different topology files by the OS.
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I0d5b95e89154b2cb6b371f24cc1b151c23ff642f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
ALC5682I-VS will use in next build.
BUG=b:194367025
TEST=none.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I34d736fe1c39860443dac07435a21ccd0ee2f21c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enable Acoustic noise mitigation for bugzzy and set slew rate to 1/8
which is calibrated value for the board.
BUG=b:207046230
BRANCH=dedede
TEST=build firmware to UPD and Acoustic noise test
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Id249a143efb9bce70f48fb466fed42e766a10937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
If a USB_MUX_EVENT happens while the AP is in S3 during powerdown
transtion (S0->S3->S5), this will cause the device to boot again after
it has finished sequencing down to S5. Since S3 is not POR for ChromeOS
devices anymore, change this event to wake from S3 and S0ix to just
S0ix.
BUG=b:206867635
TEST=emerge-brya coreboot
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Icdab40b6a845a34246d7da336f43e970f7908301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
as doc #632048, there is a fix in MRC for this sighting but DdrMemoryDown need to be set to 1.
BUG=b:192478111
BRANCH=volteer
TEST=FW_NAME=chronicler emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: If7ead2d0bb2955a4f1b81d012ee2e2518b2a82e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59373
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial
probe during kernel boot and prevent privacy LED blink.
BUG=b:199823938
TEST=Build and boot redrix to OS. Verify entries in SSDT and monitor LED
during boot.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I88ea1b87698c63e1bd69367ee857fba3f25c84ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add separate gpio table for TPM i2c and interrupt. Remove TPM gpios from
early_gpio_table. This allows for initializing TPM gpios separately from
other gpios.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I51d087087b166ec3bb3762bc1150b34db5b22f2f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59083
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on Intel Kit#615686, USB3 only needs to disable TBT and DMA per
port. And if uses USB3 directly you need to set TcssAuxOri accordingly.
BUG=b:206716691,b:205235144
TEST=USB function work as expected at USB3 only sku.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I303d042d6c80194ff48130fe4e9c04b49ca13ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:B
and MT53E512M32D1NP-046 WT:B.
BUG=b:191574298
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Id3fc35605675b953bf993a29f35140f7721eedab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59299
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After CB:57539 applied, it can support romstage GPIO table override.
We can move SSD PERST# de-assertion to romstage.
The reason for this is to give enough time after PERST#
deassertion so that the SSD has enough time to initialize before
the FSP scans the RPs for downstream devices.
BUG=b:199714453
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I242cb1517f564d9d135d523b1e7f95ac34d601f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enable Acoustic noise mitigation for redrix and set slew rate to 1/8
BUG=b:204009588
TEST=build and verified by power team
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I0fc0bb68c4de6fca60ee290eb46a77200d748ca8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Related to https://review.coreboot.org/c/coreboot/+/58555
commit-id: 35b7e0a2d82ac
In 58555, we added the SOC ID for Stoneyridge in amdfwtool
command line. But it raised building error because it then called
"set_efs_table" without setting SPI mode. So we skipped calling that.
But in set_efs_table, it has case for Stoneyridge. The boards also
need to have this setting. So we remove the skipping and give the
proper SPI mode in mainboard Kconfig.
Change-Id: I24499ff6daf7878b12b6044496f53379116c598f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Windows (10/11) freaks out and generates an interrupt storm
if two ACPI devices are enabled and share an interrupt, even
when only one device is actually present. To mitigate this,
mark Cyan's touchpad/touchscreen interrupts as SharedAndWake
rather than ExclusiveAndWake.
Test: build/boot Windows 10 on Relm, observe normal CPU
usage in Task Manager for System Interrupts task when
touchpad/touchscreen in use.
Change-Id: I09bc878318f9fa6252f65a42ad46109418805fa0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Correct GPE settings so touchpad can wake up DUT.
BUG=b:206526991
TEST=emerge-brya coreboot and builds without error
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I1978e9220ad7a275d351ad5eeff7036131926b24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or
less to production that will need to disable autonomous GPIO power
management and then can get H1 version by gsctool -a -f -M
BUG=b:205315500
TEST=emerge-brya coreboot and test that DUT can boot to OS.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib26797fa2d4d0b1a6eb28c5d79b9ac0a6054abd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
SSD sometimes can't be detected in in warm/cold boot stress.
M.2 spec describes SSD_PERST# should be sequenced after power enable.
BUG=b:199967106
TEST=SSD was always discovered in warm/cold boot stress.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I74c21cd96cf1c4518c4ed7c0b3b39e915b6b1ff7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add VBTs for all hatch variants currently supported by
ChromeOS recovery images. For variants which use multiple
VBTs and select at runtime, ensure these are added directly
to CBFS.
Change-Id: I3c62ce204e3272e778ba0a34f7a47a65d8125f53
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
TypeC AUX configuration is variant specific. So move into variant level.
BUG=b:205235144
TEST=No typeC port 0 AUX in felwinter.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I02bfea462cf4c6359fd8d5cca4368786ee03bc8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add VBTs for all octopus variants currently supported by
ChromeOS recovery images. For variants which use multiple
VBTs and select at runtime, ensure these are added directly
to CBFS.
Change-Id: I4b5c4268f9255d658f9762d94488db66e0677830
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Windows (10/11) freaks out and generates an interrupt storm
if two ACPI devices are enabled and share an interrupt, even
when only one device is actually present. To mitigate this,
mark Peppy's interrupts as Shared rather than the default
of Exclusive.
Test: build/boot Windows 10 on Peppy, observe normal CPU
usage in Task Manager for System Interrupts task when
touchpad in use.
Change-Id: Ida78ddec3105cef6581cdde78da2e2c97d983a0a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This board does not have a LPC or eSPI connection to the NC FPGA anymore
and therefore IO port 0x80 is not useable for POST codes anymore. Enable
the feature of sending the POST codes to the NC FPGA via PCI so that the
POST codes are visbile again in coreboot.
Change-Id: I9043e4ec9a2ad6b946e373bb3dce9da3d42d00d1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Initialize SPM (System Power Management) in RAM stage.
This adds 55ms to the boot time.
TEST=program counter of SPM is correct value(0x250) after booting up
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I822417f7a679107760b202dd43fb79d1934940bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Setting of MSDC is defined by soc, so we move them to soc folder.
TEST=emerge-cherry coreboot; emerge-asurada coreboot
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Update board type to 4 as per MRC team's input. This
fixes LP5 sagv point 3 being clipped from the expected
5200Mhz to 4800Mhz.
TEST=Boot to OS, verify frequency locked.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I9472aec41537425c1ed648b949f484939ee9ff99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
In next phase build, the audio codec will change to ALC5682I-VS
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I5906ef9bb88da7fe450a986bf7dd1ee701227f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to
access eMMC in the very early stage (for example, depthcharge needs it
20ms after started) so we have to start initialization in coreboot.
TEST=boot kernel from eMMC ok
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bc06b1fc506b1d6f54f7f456117d22477a87e29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The Corsola reference design has both eMMC and SD Card interfaces
so we have to configure both in RAM stage.
TEST=boot kernel from eMMC and SDCard ok
BUG=b:202871018
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Change-Id: I0fa8712eb61685a305dc5dd49cc2e55f1f0eecd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The Corsola reference design has both eMMC and SD Card interfaces
so we have to configure both in RAM stage.
TEST=build pass
BUG=b:202871018
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Change-Id: I2f26a8a11edd29a80a7195e3a324151d66ecb293
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add the support LP5 RAM parts for vell:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
BUG=b:204284866
TEST=emerge-brya coreboot
Change-Id: I49745948ebdb25fd98e285defd75714f80271968
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
In CL:3248796 GPIO_5 was made the default for SD_AUX_RESET_L. No variant
is actually using GPIO_5 for SD_AUX_RESET_L. Making GPIO_69 the default
and only overriding to GPIO_70 for guybrush bid==1.
BUG=b:202992077
BRANCH=None
TEST=Build and boot guybrush, SD card works
Change-Id: I6546ad9961f6f7146aa3aefc35d39a2eb282a252
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Redrix has 4 thermal sensors, so add the missing sensors settings.
BUG=b:200134784
TEST=build and verified by thermal team.
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Ia9c58129d439ade21e96896c5e593cd08a627603
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
As Hoglin variant was recently added, need to make sure that it uses
the same configs as piglin.
BUG=b:197366666
BRANCH=None
TEST=create hoglin image and make sure that it boots on CRD 2.0
Change-Id: I14497a205262ac1081c24631e4fd8d39bb804fce
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59273
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit adb393bdd6.
This relands commit 6260bf712a.
Reason for revert:
The original CL did not handle some devices correctly.
With the fixes:
* commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants'
early GPIO tables)
* commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early
GPIO tables)
* commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage
This CL also fix the following platforms:
* Change to always trusted: cyan.
* Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus,
poppy, reef, volteer.
* Add to both Makefile and early GPIO table: zork.
For mb/intel:
* adlrvp: Add support for get_ec_is_trusted().
* glkrvp: Add support for get_ec_is_trusted() with always trusted.
* kblrvp: Add support for get_ec_is_trusted() with always trusted.
* kunimitsu: Add support for get_ec_is_trusted() and initialize it as
early GPIO.
* shadowmountain: Add support for get_ec_is_trusted() and initialize
it as early GPIO.
* tglrvp: Add support for get_ec_is_trusted() with always trusted.
For qemu-q35: Add support for get_ec_is_trusted() with always trusted.
We could attempt another land.
Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
With latest hardware revision all clock outputs will be used on this
mainboard. For this reason set all clock source mappings to
'PCIE_CLK_FREE' to have a free running clock.
Change-Id: Ic3f6fb4e24128742ed72dade7a4555c39fb722ae
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
HECI #2 is not used for CSE communication. Therefore, it is not
necessary to set the parameter 'Heci2Enable' in devicetree.
Change-Id: I7012e4d877a464699727ca775af3f9965e0602e9
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
PCIE port 6 is empty as per schematics.
BUG=b:206047996
TEST=PCIE port 6 is disabled.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I30fa897c9310c44545e3df670895639a5144e1de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
USB2 port 0 is empty as per schematics.
BUG=b:206047996
TEST=USB2 port 0 is disabled.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I45d467a80c23d82dc33dcbed176430a758eea403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enable RTD3 driver for PCIe-eMMC bridge, If the board version is less
than 1, do not enable RTD3 driver.
BUG=b:204469567
TEST=Boot into eMMC storage and perform suspend stress 100 cycle passed
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I5836d65cedfe3907af2c4c33de7a396c4bb8b727
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update PL1 minimum value from 3W to 12W as per the thermal design
discussed in this bug 203371203 comment #10.
BUG=b:203371203
BRANCH=None
TEST=Build and boot the gimble system
Change-Id: Id66cfb6f6dc0217bd4d83eae1d66ad867a1bdb46
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Create the vell variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:205908918
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_VELL
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Change-Id: Ide8ba1c0dd9b5d9ad90556053abf2a597136a10c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1. Enable and setup USB drivers.
2. Pull up to a weak resistor for USB3_HUB_RST_L and we reset
the hub via GPIO149.
TEST=boot kernel from USB ok
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifcc11d51b0c1e495477957111e6021ef8275f629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The 'corsola' reference design will include two implementations
with different BOM selections - 'krabby' and 'kingler'.
TEST=none
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iaf9c6af1a395030937a9a5c00e95d7246ddcb6eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add separate gpio table for early eSPI bus init. Remove espi GPIO from
early_gpio_table. This allows for initializing eSPI separately from
other GPIOs. Simplify verstage_mainboard_early_init.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I0cd439f207df7c27575ae363b207293d40485bf8
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This reverts commit ba6fdc892d.
Reason for revert: Refer to intel doc #627075 (Intel_600_Series Chipset_Family_PCH_GPIO_Impl_Sumry_ Rev1p5p1), GPP_R6 ~ GPP_R7 should be NF3 for dmic.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I460fd99b4ad4b9c470f692032ff7ea2b51cad388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Do not place console output in low-level GPIO functions.
The caller of get_recovery_mode_switch() is in vboot_logic.c
that is linked in romstage. So presumably recovery mode
is broken and is not fixed with this commit either.
Change-Id: I2a0fdbb370d54898c72adb29a0e9b990a5fc0ce1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or
less to production that will need to disable autonomous GPIO power
management and then can get H1 version by gsctool -a -f -M
BUG=b:201054849
TEST=USE="project_primus emerge-brya coreboot" and verify it builds
without error.
Change-Id: If5a99a96e5d4b84be3f2c1165283ce249ca75d58
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Low-level GPIOs should not depend on late cros_gpios that
should be guarded with CHROMEOS and implemented for the
purpose of ACPI \OIPG package generation.
Change-Id: Ibe708330504bc819e312eddaf5dfe4016cda21a1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable SaGv.
BUG=b:198235324
TEST=Boot into without issues.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3cbff8d28bb5b5bfdad323f348b9f880245d049d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use gpio_keys driver to add ACPI node for pen eject event. Also
setting gpio wake pin for wake events.
BUG=b:192415743
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia36119678cfd5c65a62685d3312537d9aa21e83b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Currently all the power sequencing for FPMCU is done explicitly in
different stages of coreboot. This can all be done by adding ACPI power
resources for FPMCU and clean up the unused code. Here is the expected
power sequence:
PowerUp : Assert EN_PWR_FP -> 3 ms delay -> De-assert FPMCU_RST_ODL
Shutdown : De-assert EN_PWR_FP -> Assert FPMCU_RST_ODL
Reboot : Shutdown -> 200 ms delay -> PowerUp
BUG=None
TEST=Build and boot to OS in Guybrush. Ensure that the FP is able to
unlock the system after the first login attempt. Ensure that the FP is
able to wakeup the system. Observed that the power resource is added
correctly in the FPMCU ACPI object
Name (_PR0, Package (0x01) // _PR0: Power Resources for D0
{
PR01
})
Name (_PR3, Package (0x01) // _PR3: Power Resources for D3hot
{
PR01
})
PowerResource (PR01, 0x00, 0x0000)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x01)
}
Method (_ON, 0, Serialized) // _ON_: Power On
{
\_SB.CTXS (0x0B)
\_SB.STXS (0x20)
\_SB.STXS (0x0B)
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
\_SB.CTXS (0x0B)
\_SB.CTXS (0x20)
}
}
Change-Id: I52322eaecf6961ff9a196ca9ab2d58b7d4599d4f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Modify settings to enable CPU PCIE RP 1 according to schematics.
BUG=b:205504257
TEST=emerge-brya coreboot and can successfully boot with ssd and emmc.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I0f817c860f2b295c6aa84fa1999d374d99f817f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
- Set MAX OC1 to USB2_C1
BUG=b:205676803
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Idcf13ad072ae5d7a897f54adb19e6b2b068609dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
We need to put USB setting in mux order.
BUG=b:204230406
TEST=Type C mux configuration is correct.
Wrong:
added type-c port0 info to cbmem: usb2:2 usb3:2 sbu:0 data:0
added type-c port1 info to cbmem: usb2:3 usb3:3 sbu:0 data:0
Correct:
added type-c port0 info to cbmem: usb2:3 usb3:3 sbu:0 data:0
added type-c port1 info to cbmem: usb2:2 usb3:2 sbu:0 data:0
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I19338e162db6145dbeb5830de1a372cf98f779a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add wifi sar for galtic/galtic360/galith360
Using convertible mode of SKU ID to load wifi table.
Each Project and SKU ID correspond as below
galtic (sku id:0x120000)
galith (sku id:0x130000)
gallop (sku id:0x150000)
galtic360 (sku id:0x260000)
galith360 (sku id:0x270000)
BUG=b:203741126
TEST=emerge-dedede coreboot chromeos-bootimage \
coreboot-private-files-baseboard-dedede
verify the SAR table is correct in each project
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: If4203d176dd717fa62c88d9b4fab8a53847213fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
List of changes:
1. Create Module Type macros as per Memory Type
(i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation
issue due to renaming of existing macros due to scoping the Memory
Type.
2. Use dedicated Memory Type and Module type for `Form Factor`
and `TypeDetail` conversion using `get_spd_info()` function.
3. Create a new API (convert_form_factor_to_module_type()) for
`Form Factor` to 'Module type' conversion as per `Memory Type`.
4. Add new argument as `Memory Type` to
smbios_form_factor_to_spd_mod_type() so that it can internally
call convert_form_factor_to_module_type() for `Module Type`
conversion.
5. Update `test_smbios_form_factor_to_spd_mod_type()` to
accommodate different memory types.
6. Skip fixed module type to form factor conversion using DDR2 SPD4
specification (inside dimm_info_fill()).
Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx.
BUG=b:194659789
TEST=Refer to dmidecode -t 17 output as below:
Without this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Unknown
....
With this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Row Of Chips
....
Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
It's commented in <types.h> that it shall provide <commonlib/helpers.h>.
Fix for ARRAY_SIZE() in bulk, followup works will reduce the number
of other includes these files have.
Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
MAINBOARD_HAS_CHROMEOS always evaluates true for this board.
The commentary about get_write_protect_state() was wrong, it's
currently only called in ramstage.
Change-Id: I0d5f1520a180ae6762c07dca7284894d9cf661b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Enable DPTF based thermal control functionality for tpch device
on brya device.
BUG=b:198582766
BRANCH=None
TEST=Build FW and test on brya0 board
Change-Id: I6a35a101599bb811fcddaabab5296f8c6c12af31
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Set RFI Spread Spectrum to 6% for Redrix as RF team request.
The default of Spread Spectrum in FSP is 1.5%, and set 1.5% in baseboard
as default.
BUG=b:200886627
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Id0b42446e9e46ef629b5ca8d5d29faf2d771348d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
During CSE firmware updates, the CSE RW firmware from ME_RW_A/B is
copied to CSE_RW, so the sizes of these regions need to match.
BUG=b:189177538
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I94e0615088349af34020fb8a126fce9e72df9ee2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
For the Qualcomm PBL configuration of GPIO, we need to initial the
GPIOs for VDD33# and RST# at the beginning of coreboot. According to
the pa8640 latest spec v1.4, update the sequence of VDD33# and PD#.
BUG=b:204637643
BRANCH=trogdor
TEST=verified the waveform of ps8640 at coreboot phase.
Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com>
Change-Id: Ia378aafa49ec462c990501ce48721e330d9648b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58994
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adjusts all I2C speed to lower then 400KHz. The rise_time_ns
and fall_time_ns values for each port are capured by a scope.
BUG=None
BRANCH=dedede
TEST=built and verified adjusted I2C speed < 400KHz
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I9504608dd8d9a5f5a3848ef34691557942c21023
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add ELAN touchscreen support for magneto.
BUG=b:203122673
TEST=Build and verify that touchscreen works.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ie86692901113e952c597fcfc6c58e7ee0fc172fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Update charger performance control table of DPTF for bugzzy.
Since the EC change chromium:197776876 modified maximum charging current
to reduce skin temperature, this change adjusts the charging performance
table with the modified value.
BUG=b:197776876
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I33e176fcf5d380b315ff352c6c65af3b8b93c4b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This drops VBOOT_NO_BOARD_SUPPORT.
There is little impact of always having recovery_mode_switch()
implemented in bootmode.c. A weak write_protect_state() is not
necessary as there is no BOOT_DEVICE_SPI_FLASH with the emulation.
Call to fill_lb_gpios() is already guarded with CONFIG(CHROMEOS)
so the weak implementation would not be referenced.
Change-Id: I3c00b30c5233ae3556b7622f97c3166668c8ab12
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Avoid indirect <vc/google/chromeos/chromeos.h> as the
files really only need <security/vboot/vboot_common.h>.
Change-Id: Ic02bd5dcdde0bb5c8be0e2c52c20048ed0d4ad94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
SPI speed override is not related to ChromeOS, thus the
location in chromeos.c was poor choice.
Change-Id: Ie3db89f252af1f44e9539497c05bdf965565a191
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9e7200d60db4333551e34a615433fa21c3135db6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Return 0 instead of -1 in case of error. Both values indicate an error
has happened. Adapt `cpu_bus_scan()` accordingly.
Change-Id: I0f83fdc41c20ed3aae80829432fc84024f5b9b47
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch sets the enable the external voltage rails since taeko
board have V1p05 and Vnn bypass rails.
BRANCH=None
BUG=b:204832954
TEST=FW_NAME=Check in FSP log and run PLT test
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I20ff310d48d3e7073fe5e94d03d29cc55a46d1f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Type C port2 uses EC mux port0 as per schematics.
BUG=b:204230406
TEST=No error message in depthahrge.
update_port_state: port C2: get_usb_pd_mux_info failed
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I85218c81018b248c41a2cdaf9360a86e2a7d4d7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The `find_resource` function will never return null (will die instead).
In cases where the existing code already accounts for null pointers, it
is better to use `probe_resource` instead, which returns a null pointer
instead of dying.
Change-Id: I329efcb42a444b097794fde4f40acf5ececaea8c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
All the mainboard variants of mc_ehl do not use the external switches
for the bypass rails. Disable the matching UPDs and all the low power
modes of the PMC.
Change-Id: I08f4effe5c4d5845bed01dfe1bd1251c58012b7f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58895
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to get a reliable real-time performance disable all P-States
for all mc_ehl based mainboard.
Change-Id: I22857cc0f1476483ca82c1c872e4519e4b350ea9
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Disable all C-states other than C0/C1 for CPU and package.
Change-Id: I2c163f859dab4b0dc02896c70122e993cdd3db72
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
There are a bunch of devices in the devicetree that are disabled in
FSP-S and not used on this board. Having them around in the devicetree,
even if disabled, is not necessary and leads to a message in the log
(left over static devices...check your devicetree).
This commit cleans up devicetree.cb and removes all unused and disabled
devices.
Change-Id: I7486f9ba362c80b43b6c888a3b40a4c947218299
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58887
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently link_speed_capability is not specified within the DXIO
descriptors sent to FSP. This value specifies the maximum speed that
a PCIe device should train up to. The only device on Monkey Island that
is not currently running at full speed is the NVME but this may not
always be the case.
BUG=b:204791296
TEST=Boot to OS and check link speed with LSPCI to verify
NVME link speed goes from 2.5 GT/s to 5 GT/s
Change-Id: Ibeac4b9e6a60567fb513e157d854399f5d12aee9
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
All of these names came from public sources.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: I1ed9cc0c1ff63dc415e0cc63fa9d2dcd429a093b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As a prevention of Row-Hammer attacks enable the FSP-M parameter
'RhPrevention'.
Change-Id: I52f68525e882aee26822d9b3c488639c00f27d17
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This configures GPIO GPP_G5 as an input pin for SD card detect.
Change-Id: I708eb112fa054f2f88857001c409fb62493b6206
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
PCIe root ports #4 (00:1c.3) and #6 (00:1c.5) are currently not used on
this mainboard and are not routed either, so remove them from the
devicetree completely. PCIe root port #7 (00:1c.6) is connected and
used. Add the missing settings for L1 substates and latency reporting to
disable these features for this port as well.
Change-Id: I47e8528bea993ed527a0aecdbc93b94bbd9a7a49
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
On mc_ehl2 there are currently four of the six PCIe clocks used to drive
PCIe devices. None of the used clock output is dedicated to a special
device. Therefore do not use a port mapping of the clocks to avoid a
stopping clock once a device is missing and the matching root port is
disabled. Instead set the mapping to 'PCIE_CLK_FREE' to have a free
running clock.
In addition, use the defined constant 'PCIE_CLK_NOTUSED' instead of the
value 0xFF to disable the CLKREQ-feature and unused clocks.
Change-Id: I81419887b7f463a937917b971465245c1cb46b94
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Setting the PM_ESPI_CS_USE_DATA2 bit in PM_SPI_PAD_PU_PD results in the
eSPI transactions being sent via the SPI2 pins instead of the SPI1 pins.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iad8e3a48496a52c14c936ab77c75dc1b403f47bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The name looked a bit odd and the Cezanne PPR #56569 Rev 3.03 confirmed
that the native function names don't have the EMMC_ prefix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I917c74afd98f2e2133e160d352f11f08c19a3ec6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The HECI device needs to be enabled to send the commands to have the
CSME change between Soft Temporary Disable mode and Normal mode.
Change-Id: I668507e3b522137bcc827aa615dab1fccd1709a0
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
On mc_ehl1 there are three of the 6 PCIe clocks used to drive PCIe
devices. None of the used clock output is dedicated to a special device
(CLK0 drives several devices on the mainboard, CLK1 and CLK2 are
connected to a PCIe switch). Therefore do not use a port mapping of the
clocks to avoid a stopping clock once a device is missing and the
matching root port is disabled. Instead set the mapping to
'PCIE_CLK_FREE' to have a free running clock.
In addition, use the defined constant 'PCIE_CLK_NOTUSED' instead of the
value 0xFF to disable the CLKREQ-feature and unused clocks.
Change-Id: I2beea76ff8fefd79f476bef343d13495b45cdfcf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58740
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Oryx Pro 6 has the same board layout as the next model in series,
Oryx Pro 7. The primary difference between the two is the dGPU (20
series to 30 series). Convert oryp6 to a variant setup in preparation
for adding the oryp7.
Change-Id: I976750c7724d23b303d0012f2d83c21a459e5eed
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable MKBP (Matrix Keyboard Protocol) interface for all volteer family
to use for buttons and switches. Disable TBMC (Tablet Mode Switch
device), as it is not needed anymore.
BUG=b:171365305
TEST=manual test on Volteer:
Volume Up/Down and Power buttons, Tablet Mode switch
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I2bb2e895af17fa4280113e57e2b0ca780af8840e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
EC_IN_RW signal from EC GPIO is connected to GPIO E7 of SOC. This GPIO
can be used to check EC status
trusted (LOW: in RO) or untrusted (HIGH: in RW).
Branch=none
Bug=none
Test=Issue manual recovery and confirm DUT is entering recovery mode on
ADL-M RVP.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I20804db450ab0b3ebe19c51ba2b294a0137d81a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update guybrush STT (Skin Temperature Tracking) configuration settings
to values provided by power team after tuning.
BUG=b:203123658
Change-Id: I14c69dbe044e4f3f2711be96e5ea80db0686b3eb
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Our boards do not boot if power_on_after_fail=Disable. Drop the option
and use the default of powering on.
Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Currently, the address size field of AT24 NVM is incorrect, and
Linux v5.10 kernel logs the message below:
at24 i2c-PRP0001:01: Bad "address-width" property: 14
The valid size of the AT24 NVM is 16 bits so modify the value from
0x0E to 0x10.
TEST=Boot brya and check the kernel log and see "Bad address-width"
error message is not shown.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I6c1ed5334396e0ca09ea0078426a7b5039ae4e8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
In order to let the ec passing the key event like recovery and power key
to the OS, we need to include EC_ENABLE_MKBP_DEVICE to generate the MKBP
device.
BUG=b:204519353, b:204512547
BRANCH=None
TEST=pressed recovery key and power button in the OS and checked the UI
behavior.
Change-Id: Ia1d0b9b301994ad9a0f4bf28b75ab0310a1d63a0
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
PCIe root ports #5 (00:1c.4) and #6 (00:1c.5) are not used on this
mainboard and are not routed either, so remove them from the devicetree
completely. PCIe root port #7 (00:1c.6) is connected and used. Add the
missing settings for L1 substates and latency reporting to disable these
features for this port as well.
Change-Id: I06f59f0369ffcd958b5fe12bb3c646d37103811f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58568
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are a bunch of devices in the devicetree that are disabled in
FSP-S and not used on this board. Having them around in the devicetree,
even if disabled, is not necessary and leads to a message in the log
(left over static devices...check your devicetree).
This commit cleans up devicetree.cb and removes all unused and disabled
devices.
Change-Id: Ia5ffb382e3524e61b8583aca801063942fe2f247
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Hynix H5ANAG6NCJR-XNC
2. Micron MT40A512M16TB-062E:R
3. ADATA 4JQA-0622AD
BUG=b:199469240
BRANCH=firmware-zork-13434.B
TEST=FW_NAME=vilboz emerge-zork coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I57cca403800d9731a7b689ac9773a7940e83904e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Some brya0 units have HPS fitted and connected to PCH I2C2, rather than
a user-facing camera.
Because HPS uses I2C address 0x51, which may conflict with the
user-facing camera EEPROM, introduce a new fw_config bit to indicate
whether HPS is present.
BUG=b:202784200
TEST=FW_NAME=brya0 emerge-brya coreboot chromeos-bootimage
TEST=ectool cbi set 6 0x28191 4 # set bit 17 for HPS
TEST=flashrom -p internal -w image-brya0.serial.bin
Signed-off-by: Dan Callaghan <dcallagh@google.com>
Change-Id: I322548bcfccf16ba571396bc88fd6fc03c036a4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58646
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add probe function for the "VS" version of the audio amplifier so taeko
can recgonize MAX98357 with ALC5682I_VS.
BUG=b:202913837
TEST=FW_NAME=taeko emerge-brya coreboot and check taeko can recgonize
MAX98357 with ALC5682I_VS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Id4ff2003ee6a6f6f4ad98694996689e1a84092c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: YH Lin <yueherngl@google.com>
GPP_B14 is used by buzzer and should be set to NF1 'SPKR'.
BUG=b:198998974
TEST=emerge-brask coreboot depthcharge and verify if the buzzer beeps.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I84978af152a7117c1f3398a9b7adde161db058dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
With cr50 fw 0.3.22 or older version, it needs to disable autonomous
GPIO power management and then can update cr50 fw successfully.
BUG=b:202246591
TEST=FW_NAME=anahera emerge-brya coreboot chromeos-bootimage.
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I9137b6264ee80bc9e00dfdc3ab3926bccb4bf47c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or
less to production that will need to disable autonomous GPIO power
management and then can get H1 version by gsctool -a -f -M
BUG=b:201266532
TEST=FW_NAME=kano emerge-brya coreboot and verify it builds
without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If6783e0df1404c9a353061fb564210aa0d12896e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Set the `PcieRpLtrEnable` option to enable the LTR capability on all PCH
PCIe root ports.
TEST=Verify LTR capability enabled in `DevCap2` using `lspci -vv`
Change-Id: I07ea37d178ea61d904c4f131fdea31479e899ef3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58326
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Map each PCIe clock source to the corresponding root port. Also, correct
the CLKREQ# mapping for clock sources not associated to any CLKREQ# pin.
The default `PcieClkSrcClkReq` value of 0 corresponds to CLKREQ# 0.
TEST=Check that Linux sees the same PCIe devices with this commit:
- All 5 onboard Ethernet NICs
- BMC
- Two random graphics cards in PEG0 and PEG1 slots
- M.2 M NVMe SSD
Change-Id: I0515877a36d42fb8858a0f0b3c0af1199a18d9af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Correct the PCIe clock source configuration as per the schematics.
Apparently, FSP does not turn off unused PCIe clock sources when using
SPS (Server Platform Services) firmware, but it does when using CSME
firmware.
TEST=BMC and Ethernet NICs get detected when using CSME firmware.
Change-Id: Id25a34816f512510640db95251a7a792c1eebe62
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This reverts commit 0a1602217f.
EC region is required in order to provide unified coreboot image for
Chrome and Windows SKU RVP's. Also removing EC region causes a regression
for ADL-P platforms.
With this patch EC region is included back into flash map.
Change-Id: I0f7f2b5dd392b08e1978a3b3f3236eac0dab1f12
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Not all platforms need to generate power resources, but the code does
not get optimized out at build time because the devicetree gets
compiled into a linked list. As this code pulls in some heavy ACPI
dependencies that is even implemented with weak empty function it
makes sense to optimize out this code using a Kconfig constant.
This saves 1.5K in ramstage size on gigabyte/ga-945gcm-s2l.
Change-Id: I82289aa7e6e82318417f3b827b86182891dfc2a6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58657
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the AMD SDLE stardust test fails with incorrect VDD/SOC
scale/offset value, it needs to update the two load line slope
settings for the telemetry.
AGESA sends these values to the SMU, which accepts them as units of
current. Proper calibration is determined by the AMD SDLE tool and the
Stardust test.
VDD scale: 92165 -> 73457
VDD offset: 412 -> 291
SOC scale: 30233 -> 30761
SOC offset: 457 -> 834
BUG=b:200194315
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
pass AMD SDLE/Stardust test
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: If53c173000a276a80247ccb08736280a25948939
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
EN_PWR_FP is used to enable power to the FPMCU. This frees up GPIO_32
for other uses.
This move applies to all board except:
* Guybrush
* Nipperkin board version 1
Add callbacks for variants to override fpmcu shtudown gpio table and
fpmcu disable gpio table.
BUG=b:202992077
TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure fingerprint
still works.
Change-Id: I4501554da0fab0cb35684735e7d1da6f20e255eb
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
GSC_SOC_INT_L gpio is used by Google Security Chip (GSC) to interrupt
SoC when the SoC is in S0 state. Hence use GPIO_85 which is in S0 domain
and save the GPIO_3 in S5 domain for other use-cases. This move applies
to all board except:
* Guybrush
* Nipperkin board version 1
Update the GPIO configuration, device tree configuration accordingly.
BUG=b:202992077
TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure that the SoC
<-> TPM communication is working fine.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I019f10f2f457ab81bcff77ce8ca609b2b40cb2ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
GPIO overrides are defined for verstage. But the overrides are neither
enabled nor applied during verstage. Enable the overrides and apply them
during verstage.
BUG=None
TEST=Build and boot to OS in Guybrush. Perform suspend/stress, warm and
cold reboot cycling for 10 iterations each. Ensure that all the PCIe
devices are enumerated fine.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I510313bf860d8d55ec3b04a9cfdfa942373163f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or
less to production that will need to disable autonomous GPIO power
management and then can get H1 version by gsctool -a -f -M
BUG=b:200918380
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I83cc1a5d80bf23d052e83c9791ef866966a3d9b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58626
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:204015941
TEST=run part_id_gen to generate SPD id
Change-Id: I78ec575d354a5ae7c014a6050364d0a5214e4e92
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Add new memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AB-MGCL
2. H54G46CYRBX267
BUG=b:204023388
BRANCH=firmware-keeby-14119.B
TEST=FW_NAME=driblee emerge-keeby coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I1b40e24faf8d85f32839a3d44fd936ca7ee7e09f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
In-band controls work to enable/disable the WWAN module. Hence
WWAN_DISABLE_GPIO is not critical and can be marked as not connected.
BUG=b:188415287
TEST=Build and boot to OS in Guybrush. Ensure that the WWAN module is
enumerated on boot and reboot.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7fefba3de9c749971911b21ed4712e950cef5a6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
On all upcoming variants and board versions of existing variants,
SD_AUX_RESET_L signal moves from GPIO_69 to GPIO_5. This means all
boards except:
* All board versions of Guybrush
* Nipperkin Board Version 1.
Also in Nipperkin, LCD_PRIVACY_PCH signal moves from GPIO_5 to GPIO_18.
Configure the gpios accordingly in baseboard, guybrush and nipperkin
variants accordingly. Also update the DXIO port descriptor for SD PCIe
engine with the corresponding AUX reset GPIO.
BUG=b:202992077
TEST=Build and boot to OS in Guybrush & Nipperkin. Ensure that the SD
Controller and SD Card are enumerated fine. Ensure that the enumeration
is successful after a suspend/resume cycle.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If28810747e6b4eaae2a693a98e1adc830f80bcf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
The baseboard enables PCIe RPs 6, 8 and 9, but kano doesn't use
these. Having them enabled will occasionally cause suspend
attempts to fail, therefore disable them in the overridetree.
BUG=b:203389490 b:192370253
TEST=FW_NAME=kano emerge-brya coreboot and verify it builds
without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ie2b82cff6d910c961eeb56704dcbae2bdc2a8c53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
On Guybrush, pen is stuffed and GPIO_5 is used to enable Pen power. On
Nipperkin board version 1, pen is not stuffed and instead the GPIO is
used to control LCD Privacy settings. On upcoming Nipperkin board
versions and other variants, GPIO_5 is not used. Configure GPIO_5
accordingly.
BUG=b:202992077
TEST=Build and boot to OS in Guybrush. Ensure that the configuration is
retained on existing boards.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2aa2f16282b91f157701212ee27ddd2e89918767
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
The `SMBIOS_PROVIDED_BY_MOBO` Kconfig option is already selected through
the `SECUNET_DMI` option. So, there's no need to select both of them.
Change-Id: I784df87893043a011906af8808aff27d636c7626
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58625
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I43df98d84c6a274d6f96c8818ce6acff9337d8d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Micron MT53E512M32D1NP-046 WT:B
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:204015944
TEST=run part_id_gen to generate SPD id
Change-Id: Icf2f7352a4bd6a58e3e7abdcaac823b863984732
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1).
BUG=b:197385770
TEST=emerge-brask coreboot and verify it builds without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia3813306f8c7b69fe5cf0e188c55256b68d329ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch set disables the external voltage rails since kano
board doesn't have V1p05 and Vnn bypass rails implemented.
BUG=b:192370253
TEST=FW_NAME=kano emerge-brya coreboot and verify it builds
without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia1f3f4b2ada0154c716aedd521d4151124411ba3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds sub-regions to SI_ME in chromeos.fmd. These are
required to support stitching of CSE components.
BUG=b:189177538
Change-Id: Ife48aafcec43555175aad44f8b6307beeaea9184
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58592
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to have an overridetree with a single board variant.
TEST=Compare static.c and observe only device order has changed.
Change-Id: I2097e247c27d5d0c5479cb533b477cd490a4c827
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
turn off WLAN ASPM L1.1/L1.2 as a short-term w/a for WLAN AP probe failure.
BUG=b:198258604
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
AP is able to be probed by wlan module
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: Ic7be523626b0ff6e4b1c66ba6af13b15061ef4cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
For coreboot proper, I/O APIC programming is not really required,
except for the APIC ID field. We generally do not guard the related
set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC).
In practice it's something one cannot leave unselected, but maintain
the Kconfig for the time being.
Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
For SMP operation IOAPIC needs to be configured.
For a build with MAX_CPUS=1 emulation might still decode
the IOAPIC MMIO window, it does not really matter to have
it always reserved.
Change-Id: Ia340fc418cd9ceda56a2a10972e130d9f289c589
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Each CPU/SoC checks the return value of the mp_init_with_smm and prints
the same error message if it wasn't successful, so move this check and
printk to mp_init_with_smm. For this the original mp_init_with_smm
function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm
function is created which then calls do_mp_init_with_smm, prints the
error if it didn't return CB_SUCCESS and passes the return value of
do_mp_init_with_smm to its caller.
Since no CPU/SoC code handles a mp_init_with_smm failure apart from
printing a message, also add a comment at the mp_init_with_smm call
sites that the code might want to handle a failure.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Using cb_err as return type clarifies the meaning of the different
return values. This patch also adds the types.h include that provides
the definition of the cb_err enum and checks the return value of
mp_init_with_smm against the enum values instead of either checking if
it's non-zero or less than zero to handle the error case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1).
BUG=b:202913826
TEST=FW_NAME=kano emerge-brya coreboot and verify it builds
without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ibf8ff0e48c4bab435d082dee27bcd53bc85b088d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CT Lin <ctlin0@nuvoton.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
M.2 spec describes PERST# should be sequenced after power enable.
BUG=b:197385770
TEST=emerge-brask coreboot and verify it builds without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia7e5c7b1a2194d53d98865d33cf1bc6111572876
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
SOC_PEN_DETECT_ODL, SOC_SAR_INT_L and WWAN_AUX_RESET_L are not connected
in nipperkin. Override those GPIO configurations.
BUG=None
TEST=Build and boot to OS in Nipperkin.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7e497f83593472ecf4927e5379e1dd7786e77e62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
WWAN_AUX_RST_L is asserted during S0i3 entry. But it needs to be
de-asserted before PCIe link training during S0i3 resume. Otherwise the
concerned gpp_bridge_2 PCIe device is not enumerated on Soi3 resume.
This change feeds in the WWAN_AUX_RST_L GPIO in the DXIO descriptor so
that SMU de-asserts this reset on S0i3 resume.
BUG=b:199780346
TEST=Build and boot to OS in Guybrush. Perform suspend/resume cycles for
500 iterations. Ensure that the PCIe devices enumerate fine.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I588c490bf3f8a7beffefc3bfd8ca5167fcbcb9a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Instead of a const port descriptor, make it configurable. This will help
to avoid adding duplicate tables for every minor configuration updates.
BUG=None
TEST=Build and boot to OS in Guybrush. Perform suspend/resume, warm and
cold reboot cycles for 10 iterations each.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If616a08ba54fddab25e5d0d860327255dfd43cbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58378
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the CnviBtAudioOffload UPD and program the corresponding
BT VPGIOs.
BUG=b:202913826
TEST=emerge-brya coreboot and verify it builds without error.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Id81cba82742f552c098ec3719a0b453b752dc5c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds LTE power off sequence for bugzzy.
BUG=None
BRANCH=dedede
TEST=FW_NAME=bugzzy emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I6be0e23b9c2c2bed9745011920394006fdaabae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Enable/disable LTE function based on DB_PORTS field of FW_CONFIG.
- GPIO control
- USB port setting
BUG=None
BRANCH=dedede
TEST=FW_NAME=bugzzy emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I8363f8e7052ff9cfa423063a7e8f5a0f9ce1df2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Support Parade ps8640 as the second source edp bridge for some trogdor
board variants/revisions.
BUG=b:194741013
BRANCH=trogdor
TEST=verified firmware screen works on lazor rev9
Change-Id: Iae5ccd8d9d33d60e4c37011ecffdd7a05af59ab2
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Rework Kconfig file that each variant has its own config option with
their specific selects / configuration and move common selects to
`BOARD_INTEL_ADLRVP_COMMON`, which is used as base for each
variant.
Also, move selects from Kconfig.name to Kconfig that the configuration
is at one place and not distributed over two files.
Built each variant with `BUILD_TIMELESS=1` and all generated
coreboot.rom files remain identical. Excluded the .config file by
disabling `INCLUDE_CONFIG_FILE` to make this reproducible.
Change-Id: If68c118f22579cc0a3db570119798f0f535f9804
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56221
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These changes include ELAN touchpad to ACPI tables and configure GPIO's.
BUG=None
Test=Boot board, touchpad should be functional
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: I78e5e133f7d3af47395819a79638a90fee4fd19e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Anahera has 4 thermal sensors, so add the missing sensors settings.
BUG=b:203187535
TEST=build and verified by thermal team.
Change-Id: I0e5c0d9c09c88cc95fdfd77b96800a0f4929d7d2
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Because of a change in the chromium OS kernel machine driver for
the MAX98357A, a _HID that matches MAX98360A has to be used.
(https://chromium-
review.googlesource.com/c/chromiumos/third_party/kernel/+/3070268/)
BUG=b:200778066
TEST=FW_NAME=anahera emerge-brya coreboot
Change-Id: Ic68373920d9135e614ff792149079de451ec6e60
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Based on the latest schematics, change eMMC CLKREQ from CLKREQ#2 to CLKREQ#6
BUG=b:197850509
TEST=build and boot into eMMC
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I0fc87c864b62a37fc3fa7a4a9a7722bf286c007b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the memory parts. The memory parts being added are:
1. Samsung K4U6E3S4AB-MGCL
BUG=None
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I0720a51336f374f709c392c4bae4ad3e4c580a2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the memory parts. The memory parts being added are:
1. Samsung K4U6E3S4AB-MGCL
BUG=None
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I91183f33b92569dd49967ef866d58043d79c287b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
ALC5682-VD/ALC5682-VS load different kernel driver by different _HID.
Update the _HID depending on the AUDIO field of fw_config.Define fw
config bit 5-7 in coreboot for codec.
BUG=b:202913837
TEST=FW_NAME=taeko emerge-brya coreboot
Change-Id: I635b173e0fe4c46d28f2c29fecee1998b29499b1
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Rework Kconfig file that each variant has its own config option with
their specific selects / configuration and move common selects to
`BOARD_INTEL_JASPERLAKE_RVP_COMMON`, which is used as base for each
variant.
Also, move selects from Kconfig.name to Kconfig that the configuration
is at one place and not distributed over two files.
Built each variant with `BUILD_TIMELESS=1` and all generated
coreboot.rom files remain identical. Excluded the .config file by
disabling `INCLUDE_CONFIG_FILE` to make this reproducible.
Change-Id: Ic7552195ed5a3ae6ab8e456d7d38d5539a052009
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Rework Kconfig file that each variant has its own config option with
their specific selects / configuration and move common selects to
`BOARD_INTEL_KBLRVP_COMMON`, which is used as base for each
variant.
Built each variant with `BUILD_TIMELESS=1` and all generated
coreboot.rom files remain identical. Excluded the .config file by
disabling `INCLUDE_CONFIG_FILE` to make this reproducible.
Change-Id: I2a9c12a15c098fcb64c006a707c94a1aed93d73a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Rework Kconfig file that each variant has its own config option with
their specific selects / configuration and move common selects to
`BOARD_INTEL_COFFEELAKE_COMMON`, which is used as base for each
variant.
Also, move selects from Kconfig.name to Kconfig so that the
configuration is at one place and not distributed over two files.
Built each variant with `BUILD_TIMELESS=1` and all generated
coreboot.rom files remain identical. Excluded the .config file by
disabling `INCLUDE_CONFIG_FILE` to make this reproducible.
Change-Id: I3b3d3cff5ea7a3f4d1c4ddd911240763e4891e06
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
M.2 spec describes PERST# should be sequenced after power enable.
BUG=b:192137970
TEST=FW_NAME=kano emerge-brya coreboot and boot to OS.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I20bf5ca66c6d05229c6d72058c5a73f38a58be3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CSE RW firmware from ME_RW_A/ME_RW_B is copied over to CSE_RW region
in case of firmware update. Ensure that the size of the regions match
so that we do not have situations where ME_RW_A/B firmware grows
bigger than what CSE_RW can hold.
BUG=b:189177538
Change-Id: I374db5d490292eeb98f67dc684c2106d42779dac
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds sub-regions to SI_ME in chromeos.fmd. These are
required to support stitching of CSE components.
BUG=b:189177538
Change-Id: I4da677da2e24b0398d04786e71490611db635ead
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make the `get_cst_entries()` function provide a read-only pointer. Also,
constify the actual data where applicable.
Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
As long as there is only one PCI segment we do not need
more complicated MCFG generation.
Change-Id: Ic2a8e84383883039bb7f994227e2e425366f9e13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Retimer FORCE_PWR GPIO is a debug GPIO, that has to be set LOW, to allow Retimer LC Domain
to toggle during a switch from DP Alt to TBT Alt modes.
Contrary to DS specifying it may be left unconfigured, hence floating, there are instances
seen during boot, where it stays HIGH (adlmrvp) or LOW (adlprvp).
Hence configure it to LOW.
Branch=none
Bug=none
Test=Boot to OS, connect TBT dock which enumerates in DP Alt,
Login, TBT dock enumerates in TBT Alt
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: I0ff58823785a31c70535ad9c913c06a653884a2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
All boards with DRIVERS_GENERIC_IOAPIC select it.
Presumably the related configuration of routing IRQ0 when
IOAPIC is enabled should be always done to provide i8259
legacy compatibility for payloads.
Change-Id: Ie87816271fa63bba892c8615aa5e72ee68f6ba93
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use the common ACPI code to reduce code duplication.
After this change, `PSS_MAX_ENTRIES` is honored correctly in P-state
table generation (as of commit c2540a9) and the number reduces from 10
to 7 entries.
Also, remnants of P_BLK support missed in CB:58096 will vanish.
Tested on google/fizz: no errors in dmesg, ACPI tables remain the same
(except PSS, as mentioned above).
Change-Id: I1ec804ae4006a2d9b69c0d93a658eb3b84d60b40
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Switch to common GNVS. No additional fields to those being present in
common GNVS are used by any SKL/KBL device. Thus, they're dropped
completely.
Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The `IRQ_SLOT_COUNT` value is only meaningful when generating a PIRQ
table. None of these boards do it, so specifying this value achieves
absolutely nothing. Drop it to prevent further useless copy-pasting.
Change-Id: I2d63b850c03fc1471c0eef180e8b621311b2c336
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Picasso and Cezanne define and use APU_I2C[01234]_BASE for the base
addresses of the I2C controllers, so align Stoneyridge with this. The
ACPI device names aren't changed from I2C[ABCD] to I2C[0123] for now
since this might change behavior in the OS and would also change the
resulting binary of a timeless build.
TEST=Timeless build results in identical image for Google/Treeya.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c400c073eba5c14bd35703b717f75df89a8719d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58370
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Follow the spec to correct the WWAN poweron and powerdown sequences.
BUG=b:195625346
TEST=USE="project_primus emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: I232d283a9d6093f5da64fcdce44e5cb640e3df0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58319
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Support GL9763E as a eMMC boot disk
BRANCH=none
BUG=b:202192686
TEST=enable DRIVERS_GENESYSLOGIC_GL9763E and check eMMC on taeko.
Cq-Depend: chromium:3153210
Signed-off-by: Kevin.Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I5db2b229ce1bbea54efe15f5288f13f8d4656899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: YH Lin <yueherngl@google.com>
The definition of those bits changed between Picasso and Renoir/Cezanne
so add a comment where those bit definitions are used as well.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If1cf4b06fc35f94cbd482f2869fcc64739e7d272
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The writes were originally added due to being part of the initialization
sequence in the reference code, but coreboot already has those registers
cleared by the time we reach this part of the code, so we can drop these
redundant writes.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I43344460e5355664841d77daf1df3fd386e047e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
I2C_BASE_ADDRESS is the beginning of the MMIO space that contains the
I2C controllers MMIO. I2C[ABCD]_BASE_ADDRESS are the base addresses of
the 4 I2C controllers, so use I2CA_BASE_ADDRESS instead here.
TEST=Timeless build results in identical image for Google/Treeya.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie8d6a438f76cd33929f5070f9ec6b2f280f471a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This reverts commit 6260bf712a.
Reason for revert: This CL did not handle Intel GPIO correctly. We need
to add GPIO_EC_IN_RW into early_gpio_table for platforms using Intel
SoC.
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: Iaeb1bf598047160f01e33ad0d9d004cad59e3f75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57951
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure I2C high / low time in the device tree to ensure Touchpad
I2C CLK runs accurately between 380 kHz and 400 kHz.
Measured I2C frequency just as below after tuning:
Touch Pad CLK: 389.2 KHz
BUG=b:202787528
TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz
Change-Id: I0f9d062fc611de0062a39849aee1174268391682
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig
does not exist in the coreboot tree (including submodules), drop it.
These files should be stored in the `site-local` subdirectory and the
paths specified for each board in `site-local/Kconfig`. For example:
config VGA_BIOS_FILE
default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200
Note that this is just an example. There are better ways to structure
one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option
would be one of them, though variants may still need special handling.
Also, update autoport to not generate `VGA_BIOS_FILE` defaults.
Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
variant_has_pcie_wwan helper returns true if gpp_bridge_2 PCIe engine is
enabled. On some variants, this engine is used by storage controllers.
Fix it by adding a weak override that returns no PCIe WWAN by default.
BUG=None
TEST=Build and boot to OS in Guybrush. Ensure that PCIe WWAN is
enumerated on boards where it is stuffed.
Change-Id: I07b9dd8fc5c8c3e1557f9268c1176d4a3cade1af
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Scout only uses I2C 1, 2, and 3 in DVT units. This removes extraneous
I2C configuration copied from Puff.
BUG=b:202195805
TEST=Boot scout, verify no more errors due to missing I2C devices
Change-Id: Ide70a53e83b3e14540873062e3bef24d1134d2e1
Signed-off-by: Matt Ziegelbaum <ziegs@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
S3 is not currently functional on Guybrush. Remove support from ACPI.
BUG=b:202401767 b:181766974
TEST=Boot Guybrush
Confirm 'deep' is not in /sys/power/mem_sleep
Confirm S0ix suspend/resume still works
BRANCH=None
Change-Id: I9ed3e051f7f2e411670649ac2528a6f40229bdc6
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Currently WWAN_AUX_RST_L is in S5 domain and does not get asserted on
S0i3 entry. Based on the schematics, the pull-down on that signal leads
to 10 mW power leakage on S0i3 entry. Assert the signal on S0i3 entry to
achieve some power savings and de-assert it on S0i3 exit.
BUG=b:195748540
TEST=Build and boot to OS in Guybrush. Ensure that the signal gets
asserted on S0i3 entry and de-asserted on S0i3 exit. Trigger
suspend/resume cycles and ensure that the WWAN module is enumerated
after each cycle.
Change-Id: I43c8655ee5209779748e4365db973e094cb08aca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58275
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct the PCH serial IO settings, suitable for this mainboard.
Change-Id: I3c9915b2d52fbc6a15ac1e68c77bfb3983f7b1cd
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
