If stage cache is enabled, we should not allow S3 resume
to load firmware from non-volatile memory.
This also adds board reset for failing to load postcar
from stage cache.
Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which
are chipset specific.
Create soc_load_logo() which will pass the logo pointer and size.
This function will call fsp_load_logo which will load the logo.
BUG=NA
TEST= Build and verified logo is displayed on Facebook Monolith
Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for automatic extraction of the Second Logical Boot
Partition from the supplied IFWI binary.
Change-Id: Ia2a9ca233bddb8e9fb4e980f0ae5e6fcf3fc757c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37681
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is a requirement for Firmware to have Firmware Interface Table (FIT),
which contains pointers to each microcode update.
The microcode update is loaded for all logical processors before reset vector.
FSPT_UPD.MicrocodeRegionBase and FSPT_UPD.MicrocodeRegionLength are
input parameters to TempRamInit API.
If these values are 0, FSP will not attempt to update microcode.
Since Gen-4 all IA-SoC has FIT loading ucode even before cpu reset in place
hence skipping FSP-T loading ucode after CPU reset options.
Also removed unused kconfig CONFIG_CPU_MICROCODE_CBFS_LOC and
CONFIG_CPU_MICROCODE_CBFS_LEN
Change-Id: I3a406fa0e2e62e3363c2960e173dc5f5f5ca0455
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37187
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The romcc bootblock will be deprecated soon and most platforms use
C_ENVIRONMENT_BOOTBLOCK already. This patch drops the
CONFIG_C_ENVIRONMENT_BOOTBLOCK symbol and adds CONFIG_ROMCC_BOOTBLOCK
where needed.
Change-Id: I773a76aade623303b7cd95ebe9b0411e5a7ecbaf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Make use of the new ETR address API in the ETR3 register related
functions.
Further, disabling and locking of global reset is now done at once to
save one read-modify-write cycle, thus the function was renamed
accordingly and the now redundant disabling in soc/apl got removed.
Change-Id: I49f59efb4a7c7d3d629ac54a7922bbcc8a87714d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Drop struct cbfs_props and replace with struct region_device object.
The goal of the cbfs locator APIs are to determine the correct region
device to find the cbfs files. Therefore, start directly using struct
region_device in the cbfs location paths. Update the users of the API
and leverage the default boot region device implementation for
apollolake.
Change-Id: I0158a095cc64c9900d8738f8ffd45ae4040575ea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The CBFS master header is a legacy structure that just conveys the same
information we already have from the FMAP these days. We're still
including it to support older CBFS implementations in some payloads, but
there's no need for coreboot itself to follow this indirection anymore.
This patch simplifies the default CBFS locator to just return the CBFS
offset and size from the FMAP directly.
Change-Id: I6b00dd7f276364d62fa1f637efbaee0e80607c49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36688
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The common cbmem_top_chipset implementation uses the FSP bootloader HOB,
thus move it to the fsp driver which is a more appropriate place.
Change-Id: I914df51a7414eb72416f816ff8375a13d5716925
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36620
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: David Guckian
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This replaces apollolake's own implementation of cbmem_top_chipset and
selects the common code one.
Change-Id: I11d12a6c8414a98d38be8b0dbf6dc57cd2efc5d6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36618
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The commit 8fc523e3 (drivers/intel/fsp2_0: Use strip_quotes for cbfs
filenames) breaks the Siemens APL mainboards as FSP-M never returns once
it is called. The reason for this is that the -b option is missing when
adding the FSP package to cbfs via cbfstool.
This patch fixes this issue.
TEST=tested on siemens/mc_apl5
Change-Id: I48e5fa36e1ad799d09714f53a3041f73b8ec3550
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36645
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: David Guckian
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The quotes were not stripped for the cbfs filenames of the FSP
components. This is causing problems when the regions-for-file macro is
executed (when VBOOT is enabled and the files should be filtered).
BUG=N/A
TEST=build
Change-Id: I14267502cfab5308d3874a0c0fd18a71b08bb9f8
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36548
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The devicetree is not made for user-choosable options, thus introduce
Kconfig options for both SGX and the corresponding PRMRR size.
The PRMRR size Kconfig has been implemented as a maximum value. At
runtime the final PRMRR size gets selected by checking the supported
values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest
to the chosen one.
When "Maximum" is chosen, the highest possibly value from the MSR gets
used. When a too strict limit is set, coreboot will die, printing an
error message.
Tested successfully on X11SSM-F
Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The x86 timers are a bit of a mess. Cases where different stages use
different counters and timestamps use different counters from udelays.
The original intention was to only flip TSC_CONSTANT_RATE Kconfig
to NOT_CONSTANT_TSC_RATE. The name would be incorrect though, those
counters do run with a constant rate but we just lack tsc_freq_mhz()
implementation for three platforms.
Note that for boards with UNKNOWN_TSC_RATE=y, each stage will have a
slow run of calibrate_tsc_with_pit(). This is easy enough to fix with
followup implementation of tsc_freq_mhz() for the platforms.
Implementations with LAPIC_MONOTONIC_TIMER typically will not have
tsc_freq_mhz() implemented and default to UNKNOWN_TSC_RATE. However,
as they don't use TSC for udelay() the slow calibrate_tsc_with_pit()
is avoided.
Because x86/tsc_delay.tsc was using two different guards and nb/via/vx900
claimed UDELAY_TSC, but pulled UDELAY_IO implementation, we also switch
that romstage to use UDELAY_TSC.
Change-Id: I1690cb80295d6b006b75ed69edea28899b674b68
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It is a user-visible option and enabled by default for ARCH_X86,
some consider it as debugging aid only. Therefore platform design
should not depend on it.
It must remain selected with CHROMEOS and boards are allowed
to explicitly select it as well.
For siemens/mc_bdx1,mc_aplX boot time will be increased due
the use of get_us_since_boot() with COLLECT_TIMESTAMPS=n.
When unable to determine if N seconds has elapsed from boot,
this turns into a delay of N seconds.
Change-Id: I6ee4195d266440143344781d39db9578cd8bdcb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Remove the now orphaned memory locking API that was replaced by a
Kconfig-based approach.
Change-Id: Iebc45f514c576d77f90f558151d25c21f0554779
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch creates a common instance of sleepstates.asl inside intel common
code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to
refer sleepstates.asl from common code block.
TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify
S0/S3/S4/S5 entries after booting to OS.
Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch creates a common instance of lpc.asl inside intel common
code (soc/intel/common/block/acpi/acpi) and asks specific soc code to
refer lpc.asl from common code block.
Note: From ICL onwards Intel Bus Device 0:1f.0 is known as eSPI
rather than LPC.
TEST=Able to build and boot ICL DE system. Dump DSDT.asl to verify
Device(LPCB) device presence after booting to OS.
Change-Id: I266d6e667e7ae794377e4882791e3be933d35e87
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36455
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds a common cbmem_top implementation to all coreboot target.
In romstage a static variable will be used to cache the result of
cbmem_top_romstage.
In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable
needs to be populated by the stage entry with the value passed via the
calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the
same implementation as will be used as in romstage.
Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I3546371dd18120e3fbd1179a79b2bdc0a7436726
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This moves common memmap functionality from skl,icl,cnl,apl to the common tree.
Change-Id: I45ddfabeac806ad5ff62da97ec1409c6bb9e89ac
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36410
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Found-by: ACPICA 20191018
Change-Id: I9f55cc033b5672917520b139444bc614462c4a05
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rework SGX enable status in a clean way without using a global variable.
Change-Id: Ida6458eb46708df8fd238122aed41b57ca48c15b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The previously provided device path made no difference, all
integrated PCI devices point back to the same chip_info
structure.
Change reduces the exposure of various SA_DEVFN_xx and
PCH_DEVFN_xx from (ugly) soc/pci_devs.h.
Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The filename chip.h has a special purpose with the generation
of static devicetree, where the configuration structure name matches
the path to the chip.h file. For example, soc/intel/skylake/chip.h
defines struct soc_intel_skylake_config.
The renamed file did not follow this convention and the structure it
defines would conflict with one defined soc/intel/common/chip.h if such
is ever added.
Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
me_read_config32() is defined in multiple places, move it to common
location. Also, this function is usually used for reading HFSTS
registers, hence move the HFSTS register definitions to common location.
Also add a funtion to check if the CSE device has been enabled in the
devicetree and it is visible on the bus. This API can be used by
the caller to check before initiating any HECI communication.
TEST=Verified reading HFSTS registers on CML RVP & Hatch board
Change-Id: Icdbfb6b30a007d469b5e018a313c14586addb130
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35225
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch includes common romstage code to setup the console
and load postcar.
Fix booting regression issue on all latest IA-SOC introduced by CB:34893
Change-Id: I9da592960f20ed9742ff696198dbc028ef519ddf
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This timestamp also got unintentionally removed from some
boards as they were transformed to use common romstage entry.
Change-Id: I12be278a674f9a2ea073b170a223c41c7fc01a94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34970
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows for minor optimization as num_timestamps becomes
a constant zero for a function with local scope. The loop
with calls to timestamp_add() gets removed from bootblock.
Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This provides stack guards with checking and common
entry into postcar.
The code in cpu/intel/car/romstage.c is candidate
for becoming architectural so function prototype
is moved to <arch/romstage.h>.
Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Doing this allows to call console_init() earlier in romstage.
This also fixes IO UART in bootblock, although it appears there
is currently no board that was affected.
Change-Id: Iec363a8c651cc1b05b24229db09d686938118f3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34969
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some timeouts given were too small when serial console is enabled due to
its spinlock making code runtime worse with every AP present.
In addition we usually don't know how long specific code runs and how
long ago it was sent to the APs.
Remove the timeout argument from mp_run_on_all_cpus and instead wait up
to 1 second, to prevent possible crashing of secondary APs still
processing the old job.
Tested on Supermicro X11SSH-TF.
Change-Id: I456be647b159f7a2ea7d94986a24424e56dcc8c4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
At the moment we only have two splitting of TSEG,
one with and one without IED. They can all use
same implementation.
Make configuration problems of TSEG region assertion
failures.
Rename file from stage_cache.c to tseg_region.c to
reflect it's purpose.
Change-Id: I9daf0dec8fbaaa1f4e6004ea034869f43412d7d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34776
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Guckian
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Any platform should need just one of these.
Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is easier to track CAR_GLOBAL_MIGRATION which is
the approach to be deprecated with the next release.
This change enforces new policy; POSTCAR_STAGE=y is
not allowed together with CAR_GLOBAL_MIGRATION=y.
Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Almost all platforms force it on. Make it enabled by
default but under user control to optionally disable it.
Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Get rid of this function and its dangerous, weak implementation.
Instead, call pmc_set_power_failure_state() directly from the SMI
handler.
Change-Id: I0718afc5db66447c93289643f9097a4257b10934
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Needed some Makefile changes to be able to compile for SMM.
Change-Id: Ibf218b90088a45349c54f4b881e895bb852e88bb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The callers don't necessarily check return value of
function. Make sure the parameters are not left
uninitialised in that case.
Change-Id: Ic02db2d35b2ec88506320e7df609940de4aef005
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34708
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Do this to avoid some amount of explicit typecasting
that would be required otherwise.
Change-Id: I5bc2c3c1dd579f7c6c3d3354c0691e4ba3c778e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add explicit CBMEM_STAGE_CACHE option. Rename
CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE.
Platforms with SMM_TSEG=y always need to implement
stage_cache_external_region(). It is allowed to return with a
region of size 0 to effectively disable the cache.
There are no provisions in Kconfig to degrade from
TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE.
As a security measure CBMEM_STAGE_CACHE default is changed to
disabled. AGESA platforms without TSEG will experience slower
S3 resume speed unless they explicitly select the option.
Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
No need to limit these declarations to FSP. Both
PARALLEL_MP_INIT smm_relocate() and TSEG_STAGE_CACHE
can be built on top of this.
Change-Id: I7b0b9b8c8bee03aabe251c50c47dc42f6596e169
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This implementation revises the UART PCI device reference in common
UART driver. The SOC functions have been aligned to provide the UART
PCI device reference using pcidev_path_on_root.
The uart_get_device() return type is changed, and files in which
it gets used are updated.
Change-Id: Ie0fe5991f3b0b9c596c3de9472e98e4091d7dd87
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Prevent implicit cast to pointers.
The compiler doesn't warn about the conversion from
integer to pointer without a cast, because SA_DEV_ROOT
is literally '0' and there seems to be an exception
for that conversion.
Change-Id: I64fc156e3b9f578414ad03a00edb7cf3e33205c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We do not want to disguise somewhat complex function
calls as simple macros.
Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
It feels appropriate to define SoC specific XHCI USB info in SoC
specific XHCI source file and an API to get that information instead of
defining it in elog source file. This will help in other situations
where the information is required.
BUG=None
BRANCH=None
TEST=Boot to ChromeOS.
Change-Id: Ie63a29a7096bfcaab87baaae947b786ab2345ed1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34290
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix regression with commit
903b40a soc/intel: Replace uses of dev_find_slot()
Platforms where FSP hides PCI devices before enumeration
may halt with error message 'PCI: dev is NULL!'.
The workaround here is to print an error message revealing
the faulty source code function and revert to old behaviour
of dev_find_slot().
Change-Id: I5eab3e7f1993b686103eaa257aacda379dc259fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34285
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is only a qualifier between TSEG and ASEG.
Change-Id: I8051df92d9014e3574f6e7d5b6f1d6677fe77c82
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
To call dev_find_slot(0, xx) in romstage can produce
invalid results since PCI bus enumeration has not
been progressed yet.
Replace this with method that relies on bus topology
that walks the root bus only.
Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
With VBOOT=y && VBOOT_MEASURED_BOOT=y message
digest will be allocated from the stack and
1 KiB reserve used with the recent platforms
was no longer sufficient.
The comment of LZMA scratchpad consuming stack
was obsolete for postcar, so these can be reduced
to same 4 KiB.
Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The DIMM manufacturing ID was not being initialized and so the DIMMs
were not described in SMBIOS tables properly.
The module type can also be provided, but the SMBIOS code expects
SPD module type values from DDR2 so the DDR3/4 values are adjusted
before sending to SMBIOS.
BUG=b:134897498
BRANCH=sarien
TEST=dump and compare with dmidecode
BEFORE:
Type: DDR4
Manufacturer: Unknown (0)
Form Factor: Unknown
AFTER:
Type: DDR4
Manufacturer: Hynix/Hyundai
Form Factor: SODIMM
Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add ECC Support and VDD Voltage to dimm_info struct. Now Bus Width
and ECCSupport will be propagated correctly in SMBIOS Type 17 Entry.
Change-Id: Ic6f0d4b223f1490ec7aa71a6105603635b514021
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33031
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident
on APL at least. It is used outside of soc/intel/ scope, e.g. to con-
figure SeaBIOS.
As we only ever configure a single UART for the coreboot console, we
don't need different addresses for each possible UART. Which saves
us a lot of code.
Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
<types.h> is supposed to provide <stdint.h> and <stddef.h>.
When <types.h> is included, <stdint.h> and/or <stddef.h> is removed.
Change-Id: I2db0a647bc657a3626cb5e78f23e9198e290261a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Clang Static Analyzer found version 8.0.0 gnvs is allocated, but
it is never used. Change sizeof(*gnvs) to sizeof(global_nvs_t)
while adding ACPI GNVS to CBMEM.
TEST=Built and boot up to kernel.
Change-Id: Ie9421af4a556d1d88183aa938ee2a124a10ab727
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I0f393385aa94f18c2e05af3b5a54999575323d18
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to
detect or initialize a required hardware component.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Fill the DIMM serial number field for SMBIOS from the saved SPD
data that is returned by FSP.
BUG=b:132970635
TEST=This was tested on sarien to ensure that SMBIOS type 17
filled the serial number from the DIMM:
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Locator: DIMM-A
Serial Number: 41164beb
Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reset GPI Interrupt status and enable registers from ramstage instead of
bootblock so that it applies to devices in field.
BUG=b:130593883
BRANCH=octopus
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot up when the system is brought out of G3, S5 & S3. Ensure
that the system boots fine to ChromeOS.
Change-Id: Ib11b580ceb23bd1fe789f549b667a8ced2d859a1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32534
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A hook for romstage is already existing but not for ramstage.
It's very useful for debugging as it allows to run code
for testing purposes by the mainboard. Also, it allows to
run configuration code or configure FSP options, which
don't have a devicetree option.
Change-Id: I9edc543943c5cbc696fc6c615cb77ef68294c980
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The name OPROM is somewhat inaccurate, since other steps to bring
up display and graphics are needed depending on mainboard/SoC.
This patch cleans up OPROM code nomenclature, and works towards
the goal of deprecating vboot1:
* Rename CONFIG_VBOOT_OPROM_MATTERS to
CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig
description
* Remove function vboot_handoff_skip_display_init
* Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY
* Add |flags| field to vboot_working_data struct
* Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff
BUG=b:124141368, b:124192753, chromium:948529
TEST=make clean && make test-abuild
TEST=build and flash eve device; attempt loading dev/rec modes
BRANCH=none
Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Clear the GPI Interrupt Status & Enable registers to prevent any
interrupt storms due to GPI.
BUG=b:130593883
BRANCH=octopus
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot up when the system is brought out of G3, S5 & S3. Ensure
that the system boots fine to ChromeOS.
Change-Id: Ia3b9d3bf08472219348e20b53bae470c589039fb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add the offset information for GPI interrupt status and enable register
in the pad_community structure. Populate the concerned information for
individual SoCs. This offset information is required to clear the
interrupt configuration during the bootup.
BUG=b:130593883
BRANCH=None
TEST=Ensure that the interrupt configuration are cleared during bootup.
Ensured that the system boots to ChromeOS.
Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The IRQ tables don't support this path, so we shouldn't report presence
of the legacy PICs. As the _PIC method is optional and we ignore the
passed parameter anyway, drop it.
Change-Id: I51301a600e16f74fde00fdcb4595e1f47a52e207
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
This patch removes multiple enable/disable function definitions and
make use of single function with argument to know feature status
(enable/disable).
Change-Id: I502cd2497b07e9de062df453ecbb9c11df692f5a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32282
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In my case, on UPsquared board with Celeron N3350 CPU,
I don't have UART2 but UART0.
Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch ensures to make use of common MP Init Kconfig to
choose desire method to peform MP initialization for platform.
Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Drop 'include <string.h>' when it is not used and
add it when it is missing.
Also extra lines removed, or added just before local includes.
Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the
initialization of the programmable interrupt controller (PIC) for
faultless operation. The PIC mode is need for USB support (e.g.
keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM).
Therefore add setup_lapic() to configure the APIC.
Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This IS_ENABLED(XXX) line should've clearly been IS_ENABLED(CONFIG_XXX).
This patch can fix that. However, I don't have (and don't plan to
acquire) an affected system to test, so approve at your own risk (or
let me know if I should just remove that check instead).
Change-Id: I79a0fca65853798ee45c3779b437864ba3cf2b1e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"mosys memory spd print all" returns incorrect memory ranks info.
This patch and 2 upcomming ones (one in FSP) will address the issue.
BUG=b:122329046
TEST=Boot to OS on Bobba variant of Octopus
BRANCH=octopus
Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/31235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
By APL BIOS Spec, we must not do this on warm boots.
The TODO comment seems stale and copied over. So the actual
requirements for SGX are unknown and we add a guard for that
case.
Change-Id: I09b4a2fe22267d7318951aac20a3ea566403492e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31200
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The FSP has a parameter to enable or disable the VTD feature
(Intel's Virtualization Technology for Directed I/O). In current header
files for FSP-S (Apollo Lake and Gemini Lake) this parameter is set to
disabled per default. Therefore, if the FSP was not modified via BCT,
this feature is most likely disabled on all mainboards.
Add a chip parameter so that VTD can be enabled on mainboard level in
devicetree and therefore this feature can be activated if needed.
Change-Id: Ic0bfcf1719e1ccc678a932bf3d38c6dbce3556bc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31194
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GLK has a dedicated USB2 port that is used specifically for CNVi
BT. This requires that the ACPI tables define an additional USB 2 port
which results in _ADR for USB 3 ports being different for GLK than
APL.
This change splits the ports in xhci.asl into APL and GLK specific
ports.asl and selects the appropriate file based on
CONFIG_SOC_INTEL_GLK. It also adds support for returning HS09 for GLK
if ACPI name is requested for that port.
BUG=b:123670712
BRANCH=octopus
TEST=Verified that generated DSDT for octopus (GLK) includes HS09 and
for reef (APL) does not include HS09 definition.
Change-Id: I2d3d3690ec9ea1f6e35c38c3b3cbb82e961b7950
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31172
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
XHCI is currently named as XHC1. This leads to namespace lookup error in
the kernel when children USB ACPI devices are added under the scope of
XHCI device.
BUG=b:123296264
BRANCH=octopus
TEST=Boot to ChromeOS; Ensure that the below error is resolved in the
kernel dmesg
[ 0.001000] ACPI Error: [\_SB_.PCI0.XHCI.RHUB.HS03] Namespace lookup
failure, AE_NOT_FOUND (20170728/dswload-210)
Change-Id: Ia4921547fee6fb51333319b9e881501a7e75ebce
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/31147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Now we have usb2eye configuration register in FSPUPD, so we need
to add an interface to override usb2eye setting.
BRANCH=octopus
BUG=NONE
TEST=Verified usb2eye custom setting works
Change-Id: I5c500964658072eaaf59364242aa928df25d99d1
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/31060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The SoC has an Image Processing Unit which is located on PCI 00:03.0.
There is a corresponding parameter for FSP which handles
enabling/disabling of this functionality (IpuEn). Add this device to
the disable_dev() function of the chip so that if this device is
disabled in devicetree the matching FSP parameter will be disabled as
well. As this parameter is only valid for Apollo Lake, use the config
switch CONFIG_SOC_INTEL_GLK to disable this code if compiled not for
Apollo Lake. As this issue is regarding a missing structure member,
this check needs to be done on preprocessor level and not at runtime.
Test=Verified this function on mc_apl2.
Change-Id: I75444bf483de32ba641f76ca50e9744fdce2e726
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If the VTd feature is enabled, there will be up to two fixed resources
which are set up by the FSP. Add these resources to the list of system
resources so that the PCI enumerator will know them.
Change-Id: If96fc1c93746e3c7f510e5b3095ea3090e1b8807
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30991
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Generate DMAR table if VTd feature is enabled.
Test=Booted into Linux on mc_apl2 and verified the DMAR table contents.
In addition turned off Vtd and verified that no DMAR table is generated
at all.
Change-Id: Ie3683a2f3578c141c691b2268e32f27ba2e772fa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It was observed system suspend/resume failure while running
RunInDozingStress. Apply correct GLK usb clock gating register
value to mitigate the failure.
BRANCH=octopus
BUG=b:120526309
TEST=Verified GLK clock gating register value after booting
to kernel.
Change-Id: I50fb16f5ab0e28e79f71c7f0f8e75ac8791c0747
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Invert the default instead of selecting it everywhere. Restores the
ability to use its Kconfig prompt.
Beside Qemu targets, the only platforms that didn't select it seem
to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The
latter two were about to be patched anyway.
Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30891
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide options to disable xHCI Link Compliance Mode. Default is FALSE
to not disable Compliance Mode. Set TRUE to disable Compliance Mode.
BRANCH=octopus
BUG=b:115699781
TEST=Verified booting to kernel.
Change-Id: I2a486bc4c1a8578cfd7ac3d17103e889eaa25fe4
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30816
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The option to specify a binary file name was added later for platforms
that do not provide microcode updates in our blobs repository. Alas,
it wasn't visible what platforms these are. And if you specified a file
for a platform that already had one, they were all included together.
Make it visible which platforms don't provide binaries with the new con-
figs MICROCODE_BLOB_NOT_IN_BLOB_REPO, MICROCODE_BLOB_NOT_HOOKED_UP and
MICROCODE_BLOB_UNDISCLOSED. Based on that we can decide if we want to
include binaries by default or explicitly show that no files are inclu-
ded (default to CPU_MICROCODE_CBFS_NONE).
Also split CPU_MICROCODE_CBFS_GENERATE into the more explicit
CPU_MICROCODE_CBFS_DEFAULT_BINS and CPU_MICROCODE_CBFS_EXTERNAL_BINS.
And clean up the visibility of options: Don't show CBFS related options
on platforms that don't support it and don't show external file options
if the platform uses special rules for multiple files (CPU_MICROCODE_
MULTIPLE_FILES).
Change-Id: Ib403402e240d3531640a62ce93b7a93b4ef6ca5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29934
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Everything is wrong here, the Kconfig symbols are only the tip of the
iceberg. Based on Kconfig prompts the SoC code performed pad configu-
rations! I don't see why the person who configures coreboot should have
the board schematics at hand.
As a mitigation, we remove the prompts for UART_DEBUG, which is renamed
to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say
what it's about), and for UART_FOR_CONSOLE in case the former is selec-
ted.
Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Recently there has been a change to print ME version. But the stage at
which the version is printed causes the HECI device to remain in D0 state.
This in turn prevents the SoC from entering S0ix state.
This change moves printing ME version a little earlier so that the HECI
device is put into D0i3 state by FSP and the SoC can enter S0ix state
successfully.
BRANCH=octopus
BUG=b:120571529
TEST=Ensure that the ME version gets printed in BIOS logs. Ensure that
the device boots to ChromeOS. Ensure that the device enters S0ix
successfully(using suspend_stress_test -c 25).
Change-Id: I85bc45003a040c8347f929457792d78a9a077c6c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/30074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
As part of the memory mapped BIOS region is covered by SRAM, check
that CBFS always fits the effectively mapped region of flash. This
is usually taken care of by reserving the SRAM range in the FMAP
(e.g. as BIOS_UNUSABLE), but can be missed.
Change-Id: If5a5b553ad4853723bf13349c809c4f6154aa5f2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/30055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to support using the common ACPI code on more platforms
than just Apollo Lake the DPTF code needs to be told what the
PCI address is for the CPU thermal device.
Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29757
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Backlight control of internal panels likely won't work as configuration
for that seems absent in coreboot. Also, libgfxinit doesn't support any
MIPI/DSI connections, yet, and neither Gemini Lake.
TEST=Booted work-in-progress port kontron/mal10 with VGA text and
linear framebuffer modes. DP display came up.
Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29903
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support to print ME version if UART_DEBUG is
enabled. Check for UART_DEBUG is necessary because talking to ME to
get the firmware version adds ~0.6 seconds to boot time.
TEST=Verified on octopus that ME version printed is correct.
Change-Id: I41217371558da1af694a2705e005429155d62838
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/29989
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sync the FSP settings with what coreboot does. Why both FSP and coreboot
configure this redundantly stays a secret.
TEST=Set SERIRQ_CONTINUOUS on kontron/mal10. A CPLD connected to LPC
works correctly now, but was confused by the wrong settings before
because the FSP defaults allowed to disable the LPC clock.
Change-Id: Id1c7180f460678bf0f9458228591050dd628c052
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Use acpigen_write_processor_cnot to implement notifications to the CPU.
Change-Id: Id64f9857bbd7db520c94de949db8f823f71d6dae
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/29891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Makes vboot measured boot mode available for all boards.
* Increase Tegra210 and Rockchip3228 SRAM for
romstage/verstage.
* Add missing files for Intel apollolake and
AMD stoneyridge as TPM driver target.
Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add a Kconfig switch to be able to set the CPU clock to the lowest
possible ratio. If enabled the CPU will consume as little power as
possible while providing the lowest performance.
This setting can be overruled by the OS if it has an p-state driver
which can adjust the clock to its need.
Change-Id: I4a59586da72d1915749110a36f565fe2aa69e073
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change disables HECI1 device at the end of boot sequence. It uses
the P2SB messaging to disable HECI1 device before hiding P2SB and
dropping privilege level.
BUG=b:119074978
BRANCH=None
TEST=Verified that HECI1 device is not visible in lspci on octopus.
Change-Id: Id6abfd0c71a466d0cf8f19ae9b91f1d3446e3d09
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change provides an interface for apollolake to set TCC before
BIOS reset complete happens in romstage.
With this change, we can add code to update Tcc in devicetree.
BUG=b:117789732
TEST=Match the result from TAT UI
Change-Id: I4419d3bbe2628fcb26ef81828d6325fc952dbabc
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Required to compensate for Chrome OS' tree differences
Change-Id: I01fe80b55c69ff57da1c96a76bd1d9b5a2d4a9a8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This patch adds following changes,
- APL, CFL, DENVERTON soc's using same implementation to setup and
teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is
cosolidated into one file and moved to common code CPU car folder.
- exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file
and moved to common CPU car.
- The new file apollolake/fspcar.c is addded to pass tempraminit
parameters.
- Coffee lake Soc uses FSPT to support Intel Security features like
BootGuard verify boot and Measured boot. Add FSP CAR support for CFL
by programming tempraminit parameters and add FSP_T_XIP default if
FSP_CAR is selected.
BUG= None
TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup.
Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR
without errors.
Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/29209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds new macros to GPIO common library helpers to allow
a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds
a helper macro to configure a pad for IRQ and wake.
Above macros are guarded using a newly added Kconfig option
SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only
by SoCs that have been validated to allow dual route of
GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that
have been validated to work with dual-routing of GPIs for IRQ and
wake.
BUG=b:117553222
Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29188
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
