Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work
around Jenkins failures caused by an unmodified clone.
Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13521
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On certain systems and CPUs Core Performance Boost (CPB) may cause
sporadic system lockups. This issue is also somewhat known on the
various proprietary BIOSes, therefore it seems to be a hardware
incompatibility when present.
Allow the user to disable CBP if needed.
Change-Id: Id6395d067d48963f6c084ad0bf79e23419af24d8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13172
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Certain registered DIMMs failed training due to an error
likely introduced during historical rebase. Ensure that
the SubMemclkRegDly bit is set according to BKDG
recommendations on Family 15 processors.
Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13148
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Under certain conditions, not elucidated in the BKDG,
an extra memclock of CAS write latency is required.
The only reliable way I have found to detect when this
is required is to try training without the delay, and
if DQS position training fails, adding the delay and
retraining.
This is probably related in some form or another to
the badly broken DQS Write Early algorithm given
in the BKDG.
Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13531
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Multilink Family 15h processors were being configured with an
incorrect PowerStepUp/PowerStepDown value. Set the value
according to the BKDG, and clean up the terrible formatting
of the power_up_down() function that led to the incorrect
values being overlooked until now.
Also change u32 declarations to uint32_t in modified functions.
Change-Id: I16e1f5205d6b5f349a3e7167dea04c9eefda4684
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13174
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Stop blinking when coming out of standby.
- Remove code to set blink when going into S3. This never
worked correctly.
Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13171
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Add the files to build soc/intel/quark and mainboard/intel/galileo for a
minimal coreboot image. Please note that this configuration does not
run. Include HTML documentation for the Galileo Gen 2 board.
Testing is successful if build completes successfully.
TEST=Build for Galileo
Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13507
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
These devicetree patches set the ACPI PM Disabled variable to 1.
This will disable the ACPI PM timer and remove from FADT table.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce
Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319362
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix
which has a power impact.
Based on a DT variable, this patch disables the ACPI PM timer
late in the boot sequence - disabling earlier will lead to a hang
since the FSP boot flow needs this timer. This also hides the ACPI PM
timer from the OS by removing from FADT table. Once the ACPI PM timer
is disabled, TCO gets switched off as well.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583
Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319361
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13588
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The setting of the SPI controller BAR was conditional
on the nominal frequency being set. Therefore, that doesn't
mean the SPI BAR is set on all boots. Move the setting of
the BAR in the southbridge_bootblock_init() which is called
prioer to cpu_bootblock_init().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Confirmed spibar is always set on glados.
Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8
Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/319461
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13587
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Vboot keeps track of the size of the hashed region in each
RW slot. While that size was being used to calculate the hash
it wasn't being honored in restricting the access within the
FMAP region for that RW slot. To alleviate that create a sub
region that covers the hashed data for the region in which
we boot from while performing CBFS accesses.
BUG=chrome-os-partner:49764
BUG=chromium:445938
BRANCH=glados
TEST=Built and booted chell with cbfstool and dev-util patches.
Change-Id: I1a4f45573a6eb8d53a63bc4b2453592664c4f78b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ac9e84af5b632e5735736d505bb2ca6dba4ce28
Original-Change-Id: Idca946926f5cfd2c87c4a740ad2108010b6b6973
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324093
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13586
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=None
Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9
Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324075
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13585
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built kunimitsu w/ separate verstage.
Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6
Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324074
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13584
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built glados w/ separate verstage and booted.
Change-Id: I626a500c183d21f94d976e24f09af15a242fba9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b564514a8b93f53a919fcdac3589e30dbac82124
Original-Change-Id: Icc989ec5700b3f1a144a6b41198b7dd2c2aac6f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324073
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13583
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell w/ separate verstage and booted.
Change-Id: Ic728c2904006376fdc2b27b512f72173a2260be3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d190af8996fea894305ebe686afbfda5f2b8a5
Original-Change-Id: I95aeb97737d0ddfa6c53269c9d14db16ed5e47cc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324072
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13582
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When vboot_handoff_flag() is called in the bootblock or a separate
verstage there's no memory nor the possibility of dram coming online.
Therefore, don't bother to attempt call cbmem_find().
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell with separate verstage which pulls in vboot_common.c
dependency. No more linking errors w/ cbmem_find() not being
around.
Change-Id: I494c93adc1c00459fdfaa8ce535c6b4c884ed0fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 414ce6aeaff657dc90289b25e5c883562189b154
Original-Change-Id: I8a5f2d154026ce794a70e7ec38883fa3c28fb6e7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324070
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13580
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some of the functions within bootmode.c may be required
by boards in verstage. Therefore, allow this file to be built
in verstage.
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell w/ bootmode.c dependencies in separate verstage.
Change-Id: Id291c1b5cc6594c3ee16c7c3385e682addc0efb6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 084b620e12e7f948087786c0e34d5999a73137a5
Original-Change-Id: I2207819ec1490767cb1cf4b92e34e714783c1c22
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324071
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13581
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to not reboot loop in the face of failed vboot verification
on resume set the PM1 control register to indicate S5. After the
subsequent cold reset the PM1 control register will indicate S5
as it should.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=On chell injected failed vboot verification. Ensured a reboot
loop doesn't ensue.
Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c
Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323504
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13579
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To allow skylake platforms to run with verified memory init
code the chipset needs to implement vboot_platform_is_resuming()
so that the vboot code can make proper decisions.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Suspended and resumed on chell. Also, tested with an EC build
which returns a bad hash to ensure that is properly caught.
Change-Id: I508a339c07dcc9e7c56a0df4201660827b3ae07a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3e11789339bcd8fc8fc99b704c6a1110acf5302
Original-Change-Id: I40264019eb28e85795258112c720056a6a3fc523
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323503
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13578
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For x86 systems which resume through the reset vector one needs to
ensure the the RW slot taken at resume time matches the one at
boot time. To that end, allow Chrome OS EC to supply the plumbing
to vboot for storing and retrieving the RW slots' hash digest
using the vstore backend.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Suspended and resumed on chell. Also, tested with an EC build
which returns a bad hash to ensure that is properly caught.
Change-Id: Ib056f7e6b3386447ed1ff95c740ef5b4544f9049
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c78546b1d6298a4c397a587c564df6d9d097e75
Original-Change-Id: I86c96a4092deab2dfa51b3043b9dba16b6a4c201
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323502
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13577
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Sometimes it's necessary for the platform to perform clean up
tasks prior to reboot when employing vboot. For example, x86 systems
that resume and do vboot verification may need to clear their
sleep control register prior to doing a cold reset so that the
next boot doesn't appear to be a resume. Allow that hook by
introducing vboot_platform_prepare_reboot().
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Ensure vboot_platform_prepare_reboot() called from vboot_reboot().
Change-Id: I622c9181d9fa3048204e3df3223d5dd4b458abca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f31ffc40bde002dec398fd4dd9d2ee9d65df0d7b
Original-Change-Id: I97318cec34494a7fc4b1ecf2cb22715d20e730ff
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323501
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13575
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For x86 systems which resume through the reset vector one needs to
ensure the the RW slot taken at resume time matches the one at
boot time. The reason is that any assets pulled out of the boot
media need to match how the platform previously booted. To do
that one needs obtain the hash digest of the chosen slot, and it
needs to be saved in a secure place on the normal boot path. On
resume one needs to retrieve the hash digest back to compare it
with the chosen slot. If they don't match resuming won't be
possible.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Suspended and resumed on chell. Also, tested with an EC build
which returns a bad hash to ensure that is properly caught.
CQ-DEPEND=CL:323460
Change-Id: I90ce26813b67f46913aa4026b42d9490a564bb6c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 01a42c0ecfc6d60d1d2e5e36a86781d91d5c47a9
Original-Change-Id: I6c6bdce7e06712bc06cc620a3d7a6a6250c59c95
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323500
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13574
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Display ME firmware status before os boot. Specifically this
patch reads out the ME hfsts1 and hfsts2 status registers that provide
information about overall ME health before device gets disabled.
This change reused most of the code from bdw me_status implementation.
BUG=chrome-os-partner:47384
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3. Can observe me status table
Change-Id: Ia511c4f336d33a6f3b49a344bfbaea6ed227ffeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a9d0fb411c3921654f0fdcea2a3d4ee601987af2
Original-Change-Id: Ied7e2dcd9a1298a38dfe1eda9296b9ca8eccf6b1
Original-Credits-to: Duncan Laurie <dlaurie@chromium.org>
Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/323260
Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13573
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Port i2c driver from uboot to coreboot
BUG=chrome-os-partner:47462
TEST=emerge-cyclone coreboot
BRANCH=tot
Change-Id: I8ce2a965acaed68ad0f0518648490ec471c6810b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c2e9592662787ebed1d0aa8cafaa00fd12c2e9c
Original-Change-Id: If791228edf29405fa4b2f959a21510bd7da9865b
Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313342
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/13113
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Port gpio driver from uboot to coreboot
BUG=chrome-os-partner:47462
TEST=None
BRANCH=tot
Change-Id: Ib6cfbb6e44cb642c7af937778076a51d405ff4a2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5cf94502faad96147d4a4adb42eb13edb64a6439
Original-Change-Id: Ia2e081a85347e2fc8bb365ca527ee2ee32af86f1
Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313341
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13112
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Port spi driver from uboot to coreboot
BUG=chrome-os-partner:47462
TEST=None
BRANCH=tot
Change-Id: I747be7001f4cfb8eec33e8e5bdef3fe5bb0eb2ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbc5c2feb6ffacb54ed94e5c7b94b38be2b2ded
Original-Change-Id: Ibea9a050ac8bdab6ce4eeb07accde53aeadade5f
Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313340
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13111
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Skeleton for soc armada38x
BUG=chrome-os-partner:47462
TEST=None
BRANCH=tot
Change-Id: I76f631ee6cdfc90c44727cb20aa960796bc785a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e91cc19468325f005c6ac920bbe27a174c409727
Original-Change-Id: Iac5fc34df1ba18b4515029aa2fcff8f78a5df191
Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313179
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Reviewed-on: https://review.coreboot.org/13110
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Walk the bus and try to find enabled devices.
Disable the PEG port if no devices are attached.
Change-Id: I67fcc831fd78ecc6dba83f4e0662ec7549cc2591
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/12894
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Issue observed:
The system boots with 4G in channel 0 and 4G in channel 1.
The system doesn't boot with any combination of 4G + 1G in
channel 0 and 4G in channel 1.
In both cases DIMM1 failed, while DIMM0 showed no issues.
Problem description:
The CLK to CMD/CTL was off by a half clock cycle.
The find the issue I X-Y plotted timC vs timB for every
lane on the failing rank.
You can see an offset by 32 units for timB, that is not present on
other ranks.
It turns out that the XOVER CMD/XOVER CTL enable bit for DIMM1 was
missing in program_timings(), which caused the clock offset.
Problem solution:
Add two functions to calculate XOVER CMD and XOVER CTL and use both
to set XOVER in program_timings() and dram_xover().
Final testing result:
The system boots with 4G + 1G in channel 0 and 4G in channel 1.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Change-Id: I88694c86054ade77e9d8bb2f1fdaf7bc559c1218
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13415
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Selecting UNCOMPRESSED_RAMSTAGE prevents lzma.c from being compiled for
romstage. Adjust the logic in rmodule.c to prevent calls to the ulzma
routine when UNCOMPRESSED_RAMSTAGE is selected.
TEST=Build and run on Galileo
Change-Id: I7409e082baab3c2a086c57ad5aa9844ba788c7cd
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13591
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This requires payload integration somewhere to be useful, because
without that, adding it will (hopefully) break the signature.
Change-Id: I67b8267e5040e26353df02d258e92a0610e19a52
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13560
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Use the flags to preset the GBB flags field. The Kconfig defaults are
chosen for a "developer" configuration.
Change-Id: Ifcc05aab10b92a2fc201b663df5ea47f92439a3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13559
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The GBB contains hardware-specific data plus some configuration. The
latter isn't supported by this change yet and will come later.
The fields that are supported (hardware ID, bmpfv, vboot keys) are
configurable through Kconfig and point to Chrome OS-style default (eg.
developer keys).
While adding vboot keys, the two keys used to sign RW regions are also
added to Kconfig, even if not yet used.
Change-Id: Icfba6061ca83182df560cd36052fbb257826d4b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13558
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add a target at the end of the build that can be used to run additional
scripts or additional targets after coreboot.rom is built.
- Source a site-local Kconfig file to allow site-specific configuration.
This eliminates the need to add a hook for a script at the end of the
build because you can add one yourself in site-local.
Example site-local/Makefile.inc:
build_complete::
ifeq ($(CONFIG_SITE_LOCAL),y)
echo "Running additional steps in site-local"
# run some script here to make my build unreproducible.
endif
.phony: build_complete
Example site-local/Kconfig:
menu "site-local"
config SITE_LOCAL
bool "site-local enabled"
help
Enable my site-local configuration to do stuff.
endmenu
Change-Id: Id4d1e727c69b5cdb05e7d52731bbb1d1e201864a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13413
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Strip out the AMD internal version tag, e.g.
* @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $
which are false/inconsistent and serve no real meaning or purpose now.
Change-Id: I4cca0899eba66a1c361ba784c5ac0222b0ee1aa6
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: https://review.coreboot.org/7516
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
pci_def.h is supposed to only contain definitions, such that it may be
included in assembly files. Declaration of functions in said file
prevents that.
Change-Id: I0f90a74291c8a2ef7a1e1027d2d2182f896050fb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/13300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of instructing users to edit xcompile when they want to build
a quark platform, give the build a way to set -march=586 so that
the quark code will build correctly. The Quark processor does not
support the instructions introduced with the Pentium 6 architecture.
Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13552
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
The registers associated with the MTRRs for Quark are referenced through
a port on the host bridge. Support the standard configurations by
providing a weak routines which just do a rdmsr/wrmsr.
Testing:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select DISPLAY_MTRRS"
* Add "select HAVE_FSP_PDAT_FILE"
* Add "select HAVE_FSP_RAW_BIN"
* Add "select HAVE_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The MTRRs are displayed and
* The message "FspTempRamExit returned successfully" is displayed
TEST=Build and run on Galileo
Change-Id: If2fea66d4b054be4555f5f172ea5945620648325
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13529
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This fixes some spelling and whitespace issues that I came across
while working on various things in the tree.
There are no functional changes.
Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
... and move them into the code using them, instead.
Change-Id: I2391234797ad00da8038dda198eadf0b0fcaedb2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13526
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the AMD A8-660K APU.
Change-Id: I210a8ba962529c26a535965689672a46b09e325f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13510
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add CONFIG_ prefix to two symbols.
- Remove the use of the third symbol as it will never be matched.
Change-Id: Ifa7f6884001cb05fb8397f193c4b08a0161f498c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13539
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The COVERAGE_MAGIC macro has a trailing `4' on it, which makes it a
64-bit large integer, as opposed to a 32-bit unsigned integer, as
originally designated in `util/cbmem/cbmem.c'. Remove this number so
building with CODE_COVERAGE will succeed.
Change-Id: Ib5d7f2704a4c092c3eca6f62e219edb30950d793
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/13520
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Under certain conditions when the APs are still executing during
MCT setup the system can hang. This was the root cause of most
of the S3 resume failures on this platform; waiting for AP stop
before MCT setup allows for reliable S3 resume.
Change-Id: I329eea9a8912d7b57efe6aae327d24fd6c3fd782
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13169
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Under certain conditions, such as when microcode updates are
being performed, it is important to make sure all APs have
finished updates and are halted before continuing with the
boot process.
Add a new wait_ap_stopped() function to allow for this
functionality to be added to the appropriate mainboard
romstage source files.
Change-Id: Ib455c937888a58b283bd3f8fda1b486eea41b0a7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13168
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
On certain Winbond SuperIO devices, when a PS/2 mouse is not
present on the auxiliary channel both channels will cease to
function if the auxiliary channel is probed while the primary
channel is active. Therefore, knowledge of mouse presence
must be gathered by coreboot during early boot, and used to
enable or disable the auxiliary PS/2 port before control is
passed to the operating system.
Add auxiliary channel PS/2 device presence detect, and update
the Winbond W83667HG-A driver to flag the auxiliary channel as
disabled if no device was detected.
Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The IOMMU/HT device was not routed correctly; add the proper APIC
mappting to the mptable generation code. Also clarify comments
surrounding the pin mappings.
Change-Id: I72ceb0f22dabdfa71a1f6231ccb841face08ff7a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13163
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The existing code did not allow for the second core of the BSP to
reside on an APIC ID other than 1, leading to a boot hang on Family
15h processors when APIC_ID_OFFSET was set to anything other than 0.
Furthermore, insufficient AP stack space was allocated for AP start.
Change-Id: I4ded3cfb3736149e2265848014352d7622d5042a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13158
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Since this code is pulled in through commonlib, it will break compilation
of cbfstool on OSX.
Change-Id: I342bfa7e755aa540c4563bb5cd8cccacee39d188
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13525
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is the very very minimum needed to compile the code.
Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13297
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some newer x86 systems can boot from non-memory-mapped boot media
(e.g. EMMC). The bootblock may be backed by small amounts of SRAM, or
other memory, similar to how most ARM chipsets work. In such cases, we
may not have enough code space for romstage very early on. This means
that CAR setup and early boot media (e.g. SPI, EMMC) drivers need to
be implemented within the limited amount memory of storage available.
Since the reset vector has to be contained in this early code memory,
the bootblock is the best place to implement loading of other stages.
Implement a bootblock which does the minimal initialization, up to,
and including switch to protected mode. This then transfers control
to platform-specific code. No stack is needed, and control is
transferred via a "jmp" such that no stack operations are involved.
Change-Id: I009b42b9a707cf11a74493bd4d8c189dc09b8ace
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/13485
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
bootblock.S was used strictly for setting up the system so that the
assembly generated by ROMCC could be executed. Since the
infrastructure now exists to run a bootblock wihtout ROMCC, rename
this file accordingly. this is done to prevent any future confusion.
Change-Id: Icbf5804b66b9517f9ceb352bed86978dcf92228f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/11784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
since commit f1e321001d, the UART init
should be in bootblock_mainboard_early_init() which runs before
console init. (see src/lib/bootblock.c)
Change-Id: Ib00afdd6e81e7689fbd743c8a5f547d424896d71
Reviewed-on: https://review.coreboot.org/13448
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Move the default select of "Use native graphics initialization" for
Peppy to the ChromeOS section as SeaBIOS (default payload) requires a
vBIOS and takes twice as long to load with this option enabled. For the
same reasons, this option shouldn't be enabled by default (def_bool y).
Change-Id: I1f2163e0a1e4bf8e5041dad150bdf7de804fb4db
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/13493
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
TEST=Boot to OS
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I9b43eb4f6f7af62a8a0bbe7bfa08feee1eaca24e
Reviewed-on: https://review.coreboot.org/13506
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now coreboot should do BIOS CAR setup along with NEM
mode setup.
This patch also provides a mechanism to use 16MB code caching
benefit although LLC still limited to 1M/1.5M based
on SOC LLC limit.
Here with unlimited cache line gets replaced. Now we could use
unlimited cache size along with well defined data size
[pg: updated to current upstream #defines]
BUG=chrome-os-partner:48412
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b
Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a
Original-Reviewed-on: https://chromium-review.googlesource.com/320855
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13138
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If coreboot's build process is reproducible (eg. using the latest git
timestamp as source), bl31 is, too.
This requires an arm-trusted-firmware side merge first (in progress) and
an update of our reference commit for the submodule, but it also doesn't
hurt anything because it merely sets a variable that currently goes
unused.
Change-Id: If139538a2fab5b3a70c67f4625aa2596532308f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13497
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The KGPE-D16 and KCMA-D8 use a Winbond W83667HG-A SuperIO. While
the Nuvoton NCT5572D is effectively the same core, and a close
enough match to get things working initially, the W83667HG-A
has a different LDN mapping and several extra features that
require a separate support driver.
Clone the Nuvoton NCT5572D and modify according to the W83667HG-A
datasheet, version 1.4.
Change-Id: I707ba2e40a22d41cd813003d84a82cb20304f55b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13156
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The KGPE-D16 supports an optional MIO audio card, which connects
to the on-board HDA interface of the SP5100.
Enable the HDA interface for use with the MIO card.
Change-Id: Idfe069f4bce7b94a7460bc7fcdd378eb57e51fda
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13152
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The existing code used an incorrect macro name to check for mainboard
DRAM voltage set support, and as a result no voltages were actually
set. Furthermore, the existing code did not contain a centralized
voltage assumption for boards that did not have a DIMM voltage set
implementation.
Use the correct macro name to test for boards with voltage set
implementation, and provide a basic fallback to 1.5V operation
for boards without a voltage set implementation.
Change-Id: I638c65fe013a8e600694d8cbedf6a10b33b0ef95
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13150
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The existing code generated an incorrect boot APIC ID from node and
core number for single node packages, leading to a boot failure when
the second node was installed.
Properly generate the boot APIC ID from node and core number.
Change-Id: I7a00e216a6841c527b0a016fa07befb42162414a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13149
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Previously with errors in the ram init, early cbmem was disabled.
Now that the ram is working correctly, set as early cbmem platform
and update all (1) boards to use it.
Tested on GA-G41M-ES2L
Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13131
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tidy up the code and move vga_textmode_init() later
Change-Id: I49967e7197416c955ae6c8775eac7d1a60c92d1c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13128
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
- Fix bug with msbpos, it was not returning the correct result
due to typo in logic, and unsigned value needed to be negative.
- Add reclaim above 4GiB
- Fix to ME related registers near the end of raminit
Change-Id: I04acd0593a457437ee4a42e14b287b2b17a160af
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13127
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Previously, 0xa0000000 to 0xc0000000 needed to be reserved as
a non-usable memory hole because it would hang on memory i/o.
Memtest86+ now passes with no errors on both channels populated.
Tested on GA-G41M-ES2L with 2x2GiB sticks of ram.
Change-Id: Ib52a63a80f5f69c16841f10ddb896ab3c7d30462
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13125
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Just rename the two scripts that are in the src/ tree to give them
a .sh extension. Since we generally expect files in the src directory
to be source files, this allows to identify these as scripts easily.
Change-Id: I0ab20a083880370164488d37a752ba2d5a192fdc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This eliminates all "ud2" instances from romstage disassembly.
Change-Id: I3b0c8322a4ca4a851b0cce8f3941425d9cb30383
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/13488
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
zeroptr is a linker object pointing at 0 that can be used to thwart
GCC's (and other compilers') "dereferencing NULL is undefined"
optimization strategy when it gets in the way.
Change-Id: I6aa6f28283281ebae73d6349811e290bf1b99483
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/12294
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add interface to program USB2_COMPBG register to set
HS_DISC_BG and HS_SQ reference voltage for each project.
TEST=Get build success and do EFT test
Original-Reviewed-on: https://chromium-review.googlesource.com/300846
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Tested-by: shkim <sh_.kim@samsung.com>
Change-Id: If2201829e1a16b4f9916547f08c24e9291358325
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Signed-off-by: shkim <sh_.kim@samsung.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
DPTF should update the charger cooling device state during
boot time and every 3 seconds after boot. But 3 seconds polling
doesn't seems to be working with current version of DPTF.
This impacts charging since DPTF writes states 4 when charger
is not connected at boot time. On connecting the charger,
DPTF doesn't write 0 to enable charging. This issue is addressed
by calling the PPPC function to read cooling device state and passing
the value to SPPC to set cooling device state. This doesn't
compromise safety since DPTF can override this value
later based on the platform thermal condition. Also this provides
additional safety measure in the unlikely event that DPTF crashes
and is not re-spawned by OS. With this patch even after DPTF crashes,
if the power adapter is plugged it would still allow the system to
charge correctly.
Original-Reviewed-on: https://chromium-review.googlesource.com/288460
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Jenny Tc <jenny.tc@intel.com>
Change-Id: I50c7666b86e45d5ab537a9d4149e6c71eba04e50
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12729
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Fish bowl HTML5 graphics benchmark with 250 fish
is not reaching 60 FPS. This change will update
the DPTF parameters to accommodate this test.
TEST=Run fish bowl benchmark with 250 fish
and check for 60 FPS.
Change-Id: I6b6827199cb0f5ab44c354abc477ea73e4de9ec5
Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302208
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13484
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Disabling S5 wake from touch panel and trackpad
TEST=Build and boot the platform.
TEST=Poweroff platform -> enter PG3 -> remove AC -> close Lid
Plug AC in -> EC boots up and AP will shutdown the platform
and open Lid -> platform boots to OS.
Change-Id: I7b661a9f1327b97d904bac40e78612648f353e39
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/288970
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Reviewed-on: https://review.coreboot.org/13425
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East
community are in two ranges - 0: INT33FF:02 GPIOS [373 - 384]
PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26]
The discontinuity was not accounted for, hence the error.Original
offset was 0x16 whereas it should be 0x13
TEST=Run crossystem and test wpsw_cur entry. If screw is present,
it should be 1 and if not present, it should be 0
Change-Id: I29e19589b3a358a42818afbc6d017d6cbc6a9c4c
Original-Signed-off-by: Kumar, Gomathi <gomathi.kumar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291572
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Icarus W Sparry <icarus.w.sparry@intel.com>
Reviewed-on: https://review.coreboot.org/13424
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Read GPIO to get the status
Change-Id: Id2d56ce4b47c4cccba2de3f113afaee6c49885c9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13186
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Configuring UPD PcdCaMirrorEn. This is a board specific parameter.
CA mirror is the Command Address mirroring option that is enabled
on this board
CQ-DEPEND=CL:13038
Original-Reviewed-on: https://chromium-review.googlesource.com/309190
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I05174e18d650332d838e5036c713e91c4840ee75
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12749
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In set_max_freq, instead of using ratio from IA_CORE_RATIOS, using
ratio from MSR_IACORE_TURBO_RATIOS
Also, punit_init needs to be called before enabling this frequency.
Original-Reviewed-on: https://chromium-review.googlesource.com/295268
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: Iabdab9ec45f8eef0a105a5a05dbcdb997b6764b0
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12736
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Cleaning up code to remove support for early revs of Strago board
Change-Id: Ic0647a17d78164fd7dfadc731c9395a8ba08c235
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13434
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Set up the GPIO(MF_ISH_GPIO_4) to read WP status.
TEST=Use crossystem to read the WP status
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I17cbcba013e2a11c2527731df985aa1243065eff
Original-Reviewed-on: https://chromium-review.googlesource.com/302424
Original-Tested-by: John Zhao <john.zhao@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13185
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Configuring Native Mode enables the card present bit in
sd card controller register.
TEST=Sd Card Plug/Unplug should work in OS and DepthCharge.
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2f017bdd7125f324fb58a88485cd83110851fbc5
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The unused lines leads to spurious interrupts
on few of the systems.
TEST=run suspend_stress test and make
sure that kbd is working.
Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313417
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13176
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The codec clock frequency was incorrectly set to 25MHz.
The only available frequency is 19.2MHz through external clock and PLL.
Original-Reviewed-on: https://chromium-review.googlesource.com/295768
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5
Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com>
Reviewed-on: https://review.coreboot.org/12732
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
VGA grub console works but display wobbles left/right
drm/i915 driver reports one error:
- [drm:i915_irq_handler] *ERROR* pipe A underrun
- Monitor does not display 1920x1080 after modeset
- Other resolutions look out of sync
Cause: suspect single bug in raminit (chipset init)
Change-Id: I2dcf59f8f30efe98f17a937bf98f5ab7221fc3ac
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/12921
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Remove include references to the soc include directory which are not
required to build the FSP driver. Remove "duplicate" include file
definitions from file that include fsp/romstage.h. Move the definition
of fill_power_state into soc/pm.h to ensure it is still available.
TEST=Build and run on Galileo
Change-Id: Ie519b3a8da8c36b47da512d3811796eab62ce208
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13436
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of tagging object files with .<class>, move them to a <class>
directory below $(obj)/. This way we can keep a 1:1 mapping between
source- and object-file names.
The 1:1 mapping is a prerequisite for Ada, where the compiler refuses
any other object-file name.
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13181
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
There were several spots in the tree where the path to a per class
object file was hardcoded. To make use of the src-to-obj macro for
this, it had to be moved before the inclusion of subdirs. Which is
fine, as it doesn't have dependencies beside $(obj).
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
LPC_CLKRUNB pin needs to be set to PU_20K to prevent leakage
TEST=Test on Strago and make sure the leakage is gone
Signed-off-by: Kane Chen <kane.chen@intel.com>
Change-Id: Id2bf7511806cdc52b505bb469238a9465b356352
Original-Reviewed-on: https://chromium-review.googlesource.com/317020
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Kane Chen <kane.chen@intel.com>
Original-Commit-Queue: Kane Chen <kane.chen@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13175
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Configure EC_IN_RW signal as gpio input.
TEST=Boot to Chrome OS in normal mode and enter recovery mode
use ctrl-d to switch to Dev mode.
Change-Id: I835a1c70d89ef2ab75c35233f889124b60bb64a3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/304040
Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Reviewed-by: Gomathi Kumar <gomathi.kumar@intel.com>
Original-Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Shobhit Srivastava <shobhit.srivastava@intel.com>
Reviewed-on: https://review.coreboot.org/13124
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This change includes following changes:
- Clean up the DDR configuration and flow.
- Removing support for non LPDDR3 boards.
- Supporting only LPDDR3 and PMIC config.
TEST=Build/flash CB and boot the platform to OS.
Change-Id: I8369443da728a4c07e0c1a82040d94034c3542da
Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297941
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Jenny Tc <jenny.tc@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13122
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Fix GPIO config for this board:
- SD card detect to GPI
- SATA GPI to not used
- GPIO_SUS1 and GPIO_SUS11 to GPI with pull up (1K and 20K)termination
- I2C4 SDA and SCL from not used to Native
Change-Id: Iecb23df465a540a71f7268c5aac48617dc74ebf2
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13431
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Properly use the CONFIG_CACHE_MRC_SETTINGS value to determine when to
cache the MRC settings.
TEST=Build and run on Galileo
Change-Id: Ibc76b20b9603b1e436a68b71d44ca1ca04db7168
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13437
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The Intel Skylake RVP3 mainboard is not building, and according
to Intel, there is no plan to continue working on it for coreboot.
The intel/kunimitsu board is the Skylake reference design for
coreboot.org.
Change-Id: Icb4e42fdb560cc3188ca29c465674f5e0b11569b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13469
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
This patch adds a check to the VPD parsing code to avoid reading the
whole thing if the first byte ('type' of the first VPD entry) is 0x00
or 0xff. These values match the TERMINATOR and IMPLICIT_TERMINATOR types
which should never occur as the first entry, so this usually means that
the VPD FMAP section has simply never been initialized correctly. This
early abort avoids wasting time to read the whole section from SPI flash
(which we'd otherwise have to since we're not going to find a Google VPD
2.0 header either).
BRANCH=None
BUG=None
TEST=Booted Oak, confirmed that VPD read times dropped from 100ms to
1.5ms.
Change-Id: I9fc473e06440aef4e1023238fb9e53d45097ee9d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20a726237e03941ad626a6146700170a45ee7720
Original-Change-Id: I09bfec3c24d24214fa4e9180878b58d00454f399
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322897
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/13467
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch adds three timestamps to coreboot and the cbmem utility that
track the time required to read in the Chrome OS Vital Product Data
(VPD) blocks (RO and RW). It's useful to account for these like all
other large flash accesses, since their size is variable.
BRANCH=None
BUG=None
TEST=Booted Oak, found my weird 100ms gap at the start of ramstage
properly accounted for.
Change-Id: I2024ed4f7d5e5ae81df9ab5293547cb5a10ff5e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b97288b5ac67ada56e2ee7b181b28341d54b7234
Original-Change-Id: Ie69c1a4ddb6bd3f1094b3880201d53f1b5373aef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322831
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
It's unused, so get rid of it.
Change-Id: I28c6dc0208686edc3aabaf624773ea70350c1c8f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13177
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Added GPIO library code to allow all BSW board specific code
to use memory configuration GPIOs in GPIO Input mode and read
them to determine which memory type is on the board.
Also added other GPIO related APIs to support GPIO access
in BSW.
Original-Reviewed-on: https://chromium-review.googlesource.com/294893
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Idd65136c0449f0cdebfae12a510985e29889fa2b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12735
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
For the coreboot license header, we want to use two paragraphs.
See the section 'Common License Header' in the coreboot wiki
for more details.
Change-Id: I4a43f3573364a17b5d7f63b1f83b8ae424981b18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13118
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This allows the native VGA to be disabled for debug, or if someone wants
to use the vbios.
Change-Id: I59a94fa0d02bfe254c8a598e15d3d9d73ecfe650
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12848
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
It ended up in .data, and that doesn't seem to be actually necessary.
Change-Id: Ib17d6f9870379d1b7ad7bbd3f16a0839b28f72c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13134
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Use CBFS_AUTOGEN_ATTRIBUTES for mc_tcu3 to enable position
and alignment attributes in cbfs.
Change-Id: I6c39bb02ab641d7e22e20e77a72a577f159549dd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13123
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
The existing code accidentally truncated the MSB from the MR0
WR value. While this probably had a minimal effect in reality,
it should be configured correctly for maximal system stability.
Change-Id: Ifb8a39c6ca47b32b44d33735e5c6c39f1dc5a44e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13147
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The existing drive strength calibration code did not strictly
follow the BKDG-defined setup process. Bring the calibration
code in line with the BKDG recommendations.
Change-Id: I122eeb93958d88de59d0c3b2979f607afa2c52c3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13145
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When an Extended Temperature Range DIMM is installed on a channel
the refresh rate should be increased per the BKDG recommendations
to allow correct operation at higher temperature ranges.
Set fast refresh on a channel if an ETR DIMM is installed on that
channel.
Change-Id: I7a085d34efc78f3f0794a5cb33b88f27a5e6d54e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13144
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The existing CBMEM TOM calculations did not account for the CC6 save region
(when enabled); this resulted in CBMEM storage being placed on top of the
CC6 save region, which resulted in corrupt CBMEM data and a boot hang.
Change-Id: I32399da0438d7b16e05192449be625f9aa675b18
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13143
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The existing code unconditionally cleared the LDT tristate enable bit,
which was incorrect for C32 sockets. Update the code to be in line
with the BKDG recommendations.
Change-Id: I8095931973ea10f1467a6621092e88c6c494565a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13142
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The existing MCT initialization code was largely missing C32 socket-
specific configuration data. Add C32 socket-specific timing and ODT
values as specified in the BKDG.
Change-Id: I8eef8d5c8581f03d269663a338d5542744c5cdd7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13141
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The existing code applied G34-specific speed limits to all socket
types. Update G34 and C32 specific speed limits to be in line with
BKDG recommendations.
Change-Id: I958ad333c47948ae741a56de5866af3e636fd24d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13140
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This was misspelled as EC_PURISM_LIBEM, causing the EC to not
get included in the build.
Change-Id: Iffbfb504926e1b90070c2dbf61c0c44ca8fb46bc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13178
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
When C_ENVIRONMENT_BOOTBLOCK is selected link bootblock using the
memlayout.ld scripts and infrastructure. This allows bootblock on
x86 to utilize all the other coreboot infrastructure without
relying romcc.
Change-Id: Ie3e077d553360853bf33f30cf8a347ba1df1e389
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13069
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Instead of solely relying on malloc for building up an address space
for the range_entry objects allow one to supply a list of free entries
to memranges_init_empty(). Doing this and only calling malloc() in
ramstage allows a memranges oboject to be used in a malloc()-free
environment.
Change-Id: I96c0f744fc04031a7ec228620a690b20bad36804
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13020
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Replace with the more familiar AT&T syntax.
Tested by sha1sum(1)ing the object files, and checking the objdump that
the code in question was actually compiled.
Change-Id: Ibdc024ad90c178c4846d82c5308a146dd1405165
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13133
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Replace with the more familiar AT&T syntax.
Tested by sha1sum(1)ing the object files, and checking the objdump that
the code in question was actually compiled.
Change-Id: Ie85b8ee5dad1794864c18683427e32f055745221
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13132
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=chrome-os-partner:47609
TEST=remove servo board connection and insert/remove an empty SD card
in recovery mode.
Change-Id: I89a1cb6914d634f07ff71b9793eb29b711381524
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d21bf091a576574cb9e976447ee2b9a69748d2b6
Original-Change-Id: I2083605c9ad88841885dfaad48dcd27e6fb5161d
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313073
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13099
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Support memory range querying to above/below 4GiB.
Enable PRERAM_CBMEM_CONSOLE.
BRANCH=none
BUG=none
TEST=build and verified pass on oak board
Change-Id: If12ab2e9b8a129e2c82dd97b0493d9abdd6985a9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 139a3163ca867ec5676c6cb81fdec724c99a4a99
Original-Change-Id: Ie190f86f49ae88671f0738e2d6ceafdad58a93cc
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292559
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=boot to kernel
Change-Id: I0630d7c172e97f81abb1722afe028542e9e7f106
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 608c66df0543c76be7e811b06718464776631b55
Original-Change-Id: I03426085121bfa44c99c351d63db28f567d0ee1d
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313969
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13097
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Mimicking change I7037308d2, always compile mdelay for romstage.
The boards that #included delay.c in the romstage now rely on the linker
instead, which is a desirable cleanup.
Change-Id: I7e5169ec94e5417536e967194e8eab67381e7c98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13115
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
BUG=none
TEST=build pass and verified on rev3
Change-Id: I3849342e59c2b022db723ef0281cdd5153ae27cb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 495e978cd7381bd393099315ac6d60fe4446dd9f
Original-Change-Id: I9626d06746e5d0bf6698a9b8e7594c58e7ff213a
Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292689
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13096
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BRANCH=none
BUG=none
TEST=build pass and test it ok on oak
Change-Id: Ib3d3f420dd576a63d7504dd0949040a3d430c675
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b17b03ed40b562a520185fa243bc4458daed6f23
Original-Change-Id: Ib9346f7913433ca82e8123feaf34fd0d6c071047
Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292687
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13095
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BRANCH=none
BUG=none
TEST=test it ok on oak-rev3
Change-Id: I05233c5b9aa237dce1e6667ed09fe6d56f8e6350
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb3efe8d0d1199ab836af01dc012cc97257b4fd4
Original-Change-Id: Ie1ab9421052dbd6aea8fbd762143cec0ce0d88f5
Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297942
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13094
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Since backlight is controlled in depthcharge, we only configure
control pins as output pin and set them power-off in the coreboot
stage.
BRANCH=none
BUG=none
TEST=Saw DEV screen during boot process.
Change-Id: I3ed95e133417194ec8e774f42770bc61d879295f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9628781801943903ba99ba1071aa374c6fc0754
Original-Change-Id: Ifd101f3e08698561d8516d83bc7d502d210e3b66
Original-Signed-off-by: YH Huang <yh.huang@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292686
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13093
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BRANCH=none
BUG=none
TEST=build and verified pass on oak board
Change-Id: I01eb059a3525bbbc5d17335cf43bc01be4355142
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc2bb9f5b461ec848df8aba07940b895401004f8
Original-Change-Id: I848468cec04a36659fbb4b898dff9368305d72ac
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292683
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13092
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BRANCH=none
BUG=none
TEST=build and verified pass on oak board
Change-Id: I2680f6b87614362dffb27490bdeedf7125006c3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc2bb9f5b461ec848df8aba07940b895401004f8
Original-Change-Id: I848468cec04a36659fbb4b898dff9368305d72ac
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292683
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13091
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a new function mt_pll_set_aud_div() to set APLL for audio I2S.
The function is called by mainboard's configure_audio().
BRANCH=chromeos-2015.07
BUG=chrome-os-partner:41507
TEST=build and verified pass on oak board
Change-Id: Ia3c2f250627028422a7427b93d78d49545eb7a75
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bb18943f5e74af7723bd4e01d4da96c0b153a0f6
Original-Change-Id: I7996a8048f2e54ab09093cca3c8bc7447b61170f
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297225
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13090
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BRANCH=none
BUG=none
TEST=none
Change-Id: Ic046c66c8e314bd61f96c2edbc5d832260590afe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 84de3a6f1a726938e2318814d6faaf6a7dd29ac0
Original-Change-Id: If29f28a092617532dd73e71e0dbe24fd930c3bf8
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292677
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12617
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The mt8173 boot rom expects the bootblock to be in a certain format.
gen-bl-img wraps our bootblock appropriately.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I7486e548d356c5bd27261851f1f1bed620715e91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbcd7959e0fda595de91899ace7236037ac833d3
Original-Change-Id: Ib9df440bfa95cf06e8041491ecdb34c357047acd
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292664
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add support for verstage
[pg: split original commit into multiple commits]
Change-Id: I8c9fe02f26bf8fa8381a7502a778bed300684986
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13052
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add support for verstage
[pg: split original commit into multiple commits]
Change-Id: Ia43bc72a1fb36c6fad5be5654abee5fc19fc4093
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13051
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
[pg: split original commit into multiple commits]
Change-Id: I0dc8d9855c98c077d4a47227de0c504c3a846953
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13050
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add more code to verstage
[pg: split downstream commit into multiple commits]
Change-Id: I578a69a1e43aad8c90c3914efd09d556920f728e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We just had a user who spent a fair amount of time debugging a
failing build due to this option being enabled. Add a little
guidance that it probably shouldn't be enabled in the help text.
Change-Id: I9339e442876c1fcd18ea564041c6cc1201c18ae5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a new Kconfig variable to enable the generation of
position and alignment attributes for cbfs files which
has constraints on this parameters.
In addition, modify Makefile.inc to support that option.
Change-Id: Ibd725fe69a4de35964bdb2dde106d9a7c37ffb47
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12968
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds support for booting the Purism Librem 13 mainboard
with coreboot, using binaries extracted from the original BIOS
and from a Broadwell Chromebook.
The following features have been tested on Ubuntu 15.10:
- Input: Keyboard and Trackpad
- SATA: Internal HDD and M.2 NGFF
- Network: WiFi and Ethernet
- USB: Bluetooth, Camera, SD Card, Ports (1xUSB2 and 1xUSB3)
- Video: Internal panel and HDMI port
- Internal speakers and microphone (headphones do not work)
- EC handling for battery, AC, lid, special keys
These binaries are extracted from the original BIOS:
- VGA BIOS
- Management Engine
- Intel Firmware Descriptor
These binaries are extracted from a Broadwell Chromebook BIOS:
- MemoryInit reference code binary
- SiliconInit reference code binary
This was developed and tested on an Librem 13 device. For those
who may want to do more development you can use EHCI debug and the
right USB port to get coreboot output.
Change-Id: Ia72e2d7ddc8ba5eef63819e5677122a5a5c705d8
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/13026
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Platforms that need to initialize WRDD package with the regulatory domain
information should implement function wifi_regulatory_domain.
A weak implementation is provided here.
Original-Reviewed-on: https://chromium-review.googlesource.com/314384
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I84e2acd748856437b40bbf997bf23f158c711712
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12744
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Get the WRDD domain code from VPD and put it in global nvs.
WRDD method in wifi.asl returns this value from global nvs.
This wifi.asl should be included in dsdt.asl under the root port where wifi
module resides.
Original-Reviewed-on: https://chromium-review.googlesource.com/314373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Change-Id: I809d28f10e80681471a785e604df102fb943a983
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SVID config set to SVID_PMIC_CONFIG
BUG=none
BRANCH=none
TEST=build, boot to OS and check the register is set properly
Change-Id: If63b8112d4da0347c3a2c4c6d82b12a1f618291c
Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308576
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13117
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
WRDD method in wifi.asl returns the regulatory domain code. This value
is read from VPD in wifi_regulatory_domain() and saved to global nvs if
CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if
CONFIG_HAVE_REGULATORY_DOMAIN is not enabled.
Change-Id: I6e96bdf0fe93ae30a3afdcb63a0f89ce21023704
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13055
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
WRDD method in wifi.asl returns the regulatory domain code. This value
is read from VPD in wifi_regulatory_domain() and saved to global nvs if
CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if
CONFIG_HAVE_REGULATORY_DOMAIN is not enabled.
Original-Reviewed-on: https://chromium-review.googlesource.com/315131
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I52e0a052d31f36c6dc04e6a0953456350e7d86c3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We already do this for lines with all zeroes, so it makes sense to
treat all ones the same, for symmetry.
Change-Id: I4b637b07a49e0c649331aa200995b474dd9a2682
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12872
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Updating EC+PD takes long enough to update that it is good to
show the "critical update" screen when doing an EC/PD update.
BUG=chrome-os-partner:49650
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e
Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13075
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In order to support vboot requesting graphics support in normal
mode the VBT needs to be passed to FSP when it is requested
outside of the usual developer/recovery path.
To make this integrate cleaner use the generic bootmode provided
display_init_required() function instead. Also have it print a
message indicating when it does not pass VBT to GOP so it is
easier to see what happened in the console logs.
BUG=chrome-os-partner:49560
BRANCH=glados
TEST=Enable EC_SLOW_UPDATE on chell and test that when vboot
requests graphics support in normal mode FSP will get passed VBT
and bring up the panel.
Change-Id: I07bc54d37d687134b21baa60b5c278b5041241cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41efd322951b8f3a8a687944832bfd89fd3014ca
Original-Change-Id: I1b68760eabbf3af1d962cb2a3199e504a7852042
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322782
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13074
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add flag handling for CONFIG_VBOOT_EC_SLOW_UPDATE to indicate
to vboot that it should show the "critical update" screen during
software sync for EC+PD.
In order to make this work on x86 where we do not run graphics
init in the normal path add handling for CONFIG_VBOOT_OPROM_MATTERS
and indicate to vboot when the option rom has been loaded.
BUG=chrome-os-partner:49560
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I5ca46457798a22e9b08aa2febfec05b01aa788f9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6a1bb8572c3485f64b9f3e759288321b44184e66
Original-Change-Id: I9f66caaac57bb9f05bc6c405814469ef7ddf4d0a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322781
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13073
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
