and gx2/raminit.c.
This is Abuild and boot tested.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6014 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
hang. Also need to set lane config to 0x00 for autonegotiation.
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6013 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
variant. It also adds additional dev_find_device calls in k8t890_ctrl.c for
subfunctions 3 and 7.
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6012 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, change the GX2 boards to use it.
Add a processor speed setting function in human readable MHz and remove
the useless and broken PLLMSR settings (the processor speed was hardcoded
to 366MHz in pll_reset.c).
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6011 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, add a copyright header to pll_reset.c.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6009 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- via/epia-n/mptable.c
- intel/eagleheights/mptable.c (commented out anyway)
- asus/p2b-d/mptable.c
- asus/p2b-ds/mptable.c
Some files still incorrectly contain some smp_write_ioapic() lines from
the original mptable utility target (Supermicro P4DPE), which has one
IOAPIC in the southbridge (Intel ICH3-S), two IOAPICs contained in
the first P64H2, and two more in the second P64H2, i.e. 5 IOAPICs in total.
However, none of the boards where this chunk of code is present has
multiple IOAPICs (and even if they had, the PCI devices where those are
located would probably be different anyway), so drop the incorrect
mptable.c contents.
Also drop the lines from the mptable utility, so that future mptable.c files
don't incorrectly inherit any of this stuff.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jonathan Kollasch <jakllsch@kollasch.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6006 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add "select IOAPIC" in the board's Kconfig file.
- Set CONFIG_MAX_PHYSICAL_CPUS to 2 on the board. There are two
CPU sockets (Slot 1) and each CPU can only have one core, multi-core CPUs
didn't exist in that era (CONFIG_MAX_CPUS was set to 2 already).
- Drop useless/duplicated enable_lapic() call from ASUS P2B-DS's romstage.c,
that function is always called if either CONFIG_SMP and/or CONFIG_IOAPIC
are set.
- Rework ASUS P2B-DS mptable.c to fix a number of things:
- Convert it to use mptable_write_buses() as all mptable.c files should do.
- Fix incorrect IOAPICID (it's 0x11 for the external 82093AA IOAPIC).
- Fix a bunch of hardcoded bus IDs, remove incorrect entries, etc.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6004 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add enable_intel_82093aa_ioapic() which enables IOAPIC usage in the
Intel 82371EB southbridge (sets the proper chip-select) and sets an
IOAPIC ID.
- We only call enable_intel_82093aa_ioapic() if a board does "select IOAPIC"
as on 82371EB-based boards the IOAPIC is an external chip (not integrated
in the southbridge) and it's only populated on multi-CPU boards.
That is, we cannot unconditionally enable it, only on SMP-capable boards.
- Due to the reason explained above, remove "select IOAPIC" from
src/southbridge/intel/i82371eb/Kconfig, and add it to
src/mainboard/asus/p2b-d/Kconfig.
- Also set CONFIG_MAX_PHYSICAL_CPUS to 2 on ASUS P2B-D. There are two
CPU sockets (Slot 1) and each CPU can only have one core, multi-core CPUs
didn't exist in that era (CONFIG_MAX_CPUS was set to 2 already).
- Drop useless/duplicated enable_lapic() call from ASUS P2B-D's romstage.c,
that function is always called if either CONFIG_SMP and/or CONFIG_IOAPIC
are set.
- Rework ASUS P2B-D mptable.c to fix a number of things:
- Convert it to use mptable_write_buses() as all mptable.c files should do.
- Fix incorrect IOAPICID (it's 0x11 for the external 82093AA IOAPIC).
- Fix a bunch of hardcoded bus IDs, remove incorrect entries, etc.
This is build-tested on ASUS P2B-D, and also boot-tested successfully there.
On Linux I now get two entries in /proc/cpuinfo (where only one appeared
before this patch), i.e. both populated CPUs are found.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
boards using ck804_early_setup.c that select CK804_USE_NIC.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5996 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Additionally, make the second SMBus more accessible in romstage.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, make them all fit in 80chars/column, fix some whitespace issues
and also some typos I noticed.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5993 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
local ints. This is wrong in most coreboot mptables, probably all
generated by util/mptable/mptable.c.
After fixing this now XP can boot in MPS mode on my M2V.
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Right now, it breaks the build of bootblock enabled boards
with that chipset.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5990 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5989 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop sig[], oem[], and productid[] fields in all mptable.c files, no
longer needed. The sig[] is always the same ("PCMP"), the oem[] is
currently also always the same ("COREBOOT"), and productid is being
passed into mptable_init() directly as string now.
- LAPIC_ADDR is passed in as parameter, too. While at the moment it's
always the same value that is passed in, the LAPIC base address could
also be relocated theoretically, so keep it as parameter for now.
- Fix a few productid entries, they were (partially) incorrect:
- DK8S2 (was "DK8X", copypaste)
- 939A785GMH (was "MAHOGANY", copypaste)
- X6DHE-G (was "X6DHE", incomplete board name)
- H8DME-2 (was "H8DMR", copypaste)
- H8QME-2+ (was "H8QME", incomplete board name)
- X6DHE-G2 (was "X6DHE", incomplete board name)
- X6DHR-iG2 (was "X6DHR-iG", incomplete board name)
- GA-M57SLI-S4 (was "M57SLI", incomplete board name)
- KINO-780AM2 (was "KINO", incomplete board name)
- DL145 G1 (was "DL145G1", small fix as per vendor website)
- DL145 G3 (was "TREX", wrong board name)
- DL165 G6 (was "HP DL165 G6", drop vendor)
- S2912 (was "S2895", copypaste)
- VT8454c (was "VIA VT8454C", drop vendor, lower-case "c")
- EPIA-N (was "P4DPE", copypaste)
- pc2500e (was "PC2500", incorrect name)
- S1850 (was "S2850", copy-paste)
- MS-7135 (was "MS7135")
- MS-9282 (was "MS9282")
- MS-9185 (was "MS9185")
- MS-9652 (was "K9ND MS-9652")
- Ultra 40 (was "ultra40")
- E326 (was "E325", copypaste)
- M4A785-M (was "TILAPIA", copypaste)
- P2B-D (was "ASUS P2B-D", drop vendor)
- P2B-DS (was "ASUS P2B-DS", drop vendor)
- Adapt the mptable utility to use mptable_init() too.
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
FADT revision inconsistent with length.
Revision: 0x1
Length: 0xf4
Expected Length: 0x74
Change the FADT revision from 1 to 3 to match its length and prevent the Windows checked build assert.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
for 256 buses, even if fewer are configured. This patch lets msr
c0010058 programming use the configured bus count, CONFIG_MMCONF_BUS_NUMBER.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5976 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is consistent with the device tree and the chip actually on the board.
Trivial.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Jonathan Kollasch <jakllsch@kollasch.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
#ifdef DEADCODE out smbus_write_byte() and smbus_write_block() as
they are static and nothing uses them or are incompletely implemented.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5972 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, update the board that uses this socket to match.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5969 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
currently restricted to recent model AMD processors, though it could be applied to others after successful testing.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5967 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
is sometimes logged. The reason is that the AP first sets a completion value
such as 0x13, which is what function wait_cpu_state() is waiting for. Then a
short time later, the AP calls function init_fidvid_ap(). This function sets
a completion value of 01. When logging is off, wait_cpu_state is fast enough
to see the initial completion value for each of the APs. But with logging
enabled, one or more APs may go on to complete function init_fidvid_ap, which
sets the completion value to 01. While mostly harmless, the timeout does
increase boot time. This patch eliminates the timeout by making function
wait_cpu_state recognize 01 as an additional valid AP completion value.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5966 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It affects only systems booting from SPI flash, not those booting from
LPC flash. By default, the SB700 reads dwords from the SPI flash chip.
Setting PrefetchEnSPIFromHost causes the SB700 to read entire cache
lines from the flash chip.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This also has an additional benefit:
I was running "sh update-microcodes.sh" previously which broke with
update-microcodes.sh: 102: Bad substitution
due to the script requiring /bin/bash instead of /bin/sh (uses bash-specific
stuff). Running "bash update-microcodes.sh" works fine.
Making the script executable in svn reduces the likelyhood of people
running the script with differing shells that may not work.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5963 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Whitespace and indentation fixes in various places.
- Fix various typos.
- Use u8, u16 etc. everywhere.
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
They now have their own home at cpu/intel/model_65x.
Signed-off-by: Keith Hui <buurin@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5960 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to zero, so for boards with RS780 not on CPU's HT chain 0, the function will
mis-configure the MMIO dst-link routing, and the following enable_pcie_bar3()
function will hang when it visits the MMIO.
The following patch fixes the problem, and is tested on a K8 board with RS780
on HT chain 1.
Signed-off-by: Liu Tao <liutao1980@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Fix that to read the register from the chain where the SB chip is on.
Signed-off-by: Liu Tao <liutao1980@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Fix incorrect argument names for @param entries.
- Add missing @param and @return entries, partly as TODOs.
- s/@returns/@return/, that's a typo.
- Small whitespace fixes while I'm at it.
- Drop useless @brief commands, they just clutter the comments and make them
harder to read. Doxygen has an option to always use the first sentence
of a Doxygen-comment as @brief automatically (should be on per default).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5955 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
abuild-tested. I have no Deschutes CPUs to boot test this with.
Signed-off-by: Keith Hui <buurin@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This CAR implementation hardcodes the Cache-as-RAM base address to:
0xd0000 - CacheSize
so the DCACHE_RAM_BASE is never actually used for this implementation
and these sockets.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5953 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is pretty much the same mechanism as in r5929.
- Use 'romstage-y' to turn i82801ax_early_smbus.c and i82801bx_early_smbus.c
into distinct compilation units, and don't #include the files anymore
in romstage.c files.
- Ditto for northbridge/intel/i82810/raminit.c, and
northbridge/intel/i82810/debug.c.
- Add various header files which are now needed, drop unused includes.
- Make functions that need to be visible non-static.
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5951 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop "select ROMCC" from the boards, as well as early_mtrr stuff.
- Add "select CACHE_AS_RAM" to socket_PGA370/Kconfig, as well as the
usual DCACHE_RAM_BASE and DCACHE_RAM_SIZE variables.
- In socket_PGA370/Makefile.inc add:
cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc
- Other smaller related fixes.
Abuild-tested and boot-tested on MSI MS-6178.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Some mainboards need to disable the power button to avoid turning off
right after being turned on, while other boards ship with a jumper over
the power button and should allow the user to configure the behavior.
This adds infrastructure in the form of four mutually exclusive options
which can be selected in a mainboard Kconfig (power button forced on/off,
and user-controllable with default on/off) and one result bool which
source code can test. (Enable the button or not.)
The options have been implemented in CS5536 code and for all mainboards
which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other
chipsets where applicable. Note that if chipset code uses the result
bool ENABLE_POWER_BUTTON, then every board using that chipset must
select one out of the four control options in order to build.
All touched boards should have unchanged behavior, except
pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the
power button can now be configured by the user.
Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed
to work as advertised on alix1c both with button enabled and disabled.
Includes additional traverse/geos changes from Nathan and
lippert/hurricane-lx changes from Jens to correctly use the new
feature on those boards.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
I could no longer boot my P3B-F with my Tualeron and r5938. Dies with
"unknown CPU". I believe it will happen with any Slot 1 440BX boards
that supports model_6bx CPUs.
I need to make the change below to make it work. abuild tested. Boot
tested on P2B-LS and P3B-F.
Signed-off-by: Keith Hui <buurin@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is in preparation of further i810 fixes and switching it to CAR.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5944 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
As both ioapic.h and acpi.h define a macro named "NMI", rename one
of them (NMI -> NMIType in acpi.h).
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Macros for the register addresses for the MTRR MSRs are already defined
in include/cpu/x86/car.h. This patch uses those macros instead of
creating a second instance of that same data.
I also added a few macros to the amd mtrr.h to make the MSR naming more
consistent.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5942 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The file is actually just including a bunch of assembly. The build rule
for bootblock.c even states that the file will be "assembler-with-cpp."
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5941 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
BTW, embed the always-the-same string instead of referencing it through "%s".
Do the same for i82371EB while we're at it.
Signed-off-by: Sylvain Hitier <sylvain.hitier@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5940 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop all non-ICH2 "struct pci_driver" entries from all files.
- Kconfig: Add missing USE_WATCHDOG_ON_BOOT.
- Drop i82801bx_sata.c and i82801bx_usb_ehci.c, ICH2 doesn't have SATA/EHCI.
- Simplify lots of code, getting rid of i82801xx remainders.
- Use u8 et al (instead of uint8_t) in a few more places.
- Use #defines from header files where possible.
- Various other fixes and updates.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5938 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The following functions are moved to devices/device_util.c:
- ram_resource()
- tolm_test()
- find_pci_tolm()
There are only two tolm_test() / find_pci_tolm() which differ from the
defaults, one of them can easily be eliminated in a follow-up patch,
maybe even both, but for now keep it simple and only eliminate the majority.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5937 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Following patch enables UDMA on ALL IDE devices. The current code enables it only for primary master, which causes my DVD drive to fail under windows install
and even after hard reset in linux (DMA seems lockup).
The fix should not have any influence for Linux because the IDE driver will
correctly reprogram this bit.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5933 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
primary / secondary IDE channel with SATA (in IDE mode).
The bug was that setup was done in wrong device.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and even after hard reset in linux (DMA seems lockup).
The fix should not have any influence for Linux because the IDE driver will
correctly reprogram this bit.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use 'romstage-y' to turn i82371eb_early_pm.c and i82371eb_early_smbus.c
into distinct compilation units, and don't #include the files anymore
in romstage.c files.
- Ditto for lib/debug.c, northbridge/intel/i440bx/raminit.c, and
northbridge/intel/i440bx/debug.c.
- Add various header files which are now needed.
- Make functions that need to be visible non-static.
- Drop a remaining "select ROMCC" from a 4440BX board.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Idwer Vollering <vidwer@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Nothing ever calls the functions in these files, and we already have
i82801ax_watchdog.c and i82801bx_watchdog.c which basically do the same
_and_ are hooked up correctly in the Makefile.inc and via the
USE_WATCHDOG_ON_BOOT mechanism.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5926 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Remove left-overs from more generic code in i82801xx times, and fix
register names as needed.
- Simplify IDE init code (and save some ROM space too).
- Simplify PIRQ code.
- Use u8 et al instead of uint8_t everywhere.
- Random other fixes.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Fix incorrect #includes, add missing ones.
- Drop unused do_smbus_write_block() and smbus_wait_until_blk_done().
- Pass smbus_io_base to all functions as the other ICH implementations do.
- Random other fixes which are required to make it build.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5924 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
bit in the AMD processor 'MMIO Limit Address Register'.
I suspect it is because of a typo where 0x80 was entered
as 0x8. If 0x80 is used, then the strap configuration
register accesses become non-posted, which is how the
Shiner reference BIOS does it.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5919 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also:
Unfortunately Intel 440BX + 82371AB/EB/MB boards can have their ISA device
on various PCI bus:device.function locations.
Examples we encountered: 00:07.0, 00:04.0, or 00:14.0.
Thus, instead of hardcoding PCI bus:device.function numbers such as
PCI_DEV(0, 7, 0), we now simply find the ISA device via PCI IDs, which
works the same on all boards.
As an additional benefit this patch also gets rid of one .c file include
in romstage.c.
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5918 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add "select CACHE_AS_RAM" in src/cpu/intel/slot_1/Kconfig.
- Add the following in src/cpu/intel/slot_1/Makefile.inc:
cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc
- Remove "select ROMCC" from all 440BX board Kconfig files.
- Drop all early_mtrr_init() calls, that's done by CAR code now.
Various small fixes were needed to make it build:
- Drop do_smbus_recv_byte(), do_smbus_send_byte(), do_smbus_write_byte(),
those were never called anyways.
- Remove the "static" from the main() functions in romstage.c files.
- Always call dump_spd_registers() from the 440BX debug.c, but use
"#if CONFIG_DEBUG_RAM_SETUP" to only have that code if RAM debugging
is enabled in menuconfig.
- Drop all "lib/ramtest.c" #includes and ram_check() calls (even if
commented out) from romstage.c's, as we've done for most other boards.
- Add missing #includes or prototypes. Some of the prototypes will be
removed later when we get rid of the #include'd .c files.
Abuild-tested for all boards, and boot-tested on A-Trend ATC-6220.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges
- drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Remove many more .c-includes from i945 based boards.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add links to the respective Intel specification updates or manuals where
the IDs are listed. Mention the possible core steppings of each CPU ID.
There are duplicate IDs in model_6xx and model_68x for now, not sure if
those should be eliminated, but there were already duplicates before this
patch, so that's probably an extra issue to look into.
Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5909 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The AMD SB700 allows changing the physical USB port to be used as
USB Debug Port, implement support for this.
Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the
SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use
D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices
currently, AFAICS.
Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility.
Untested, but should work.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It cannot be changed via software according to the datasheet, whereas
this is indeed possible on AMD SB700. I tested using the SB700 mechanism
on SB600 but it didn't work, so I suspect the datasheet is indeed correct.
Thus, don't show the kconfig option for selecting the physical USB port
on the AMD SB600 southbridge.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5906 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
All these boards define QRANK_DIMM_SUPPORT anyway,
which is probably what was meant.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5905 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This makes the CAR implementations a lot more readable, shorter and
easier to follow, and also reduces the amount of uselessly duplicated code.
For example there are more than 12 open-coded "enable cache" instances
spread all over the place (and 12 "disable cache" ones), multiple
"enable mtrr", "save BIST", "restore BIST", etc. etc.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5902 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5901 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Makefile:261: warning: overriding commands for target `coreboot-builds/a-trend_atc-6220/lib/lzma.ramstage.o'
Makefile:261: warning: ignoring old commands for target `coreboot-builds/a-trend_atc-6220/lib/lzma.ramstage.o'
lzma.c is already included unconditionally in the same file.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5900 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
rename it slightly, make it visible only on relevant northbridges,
drop it entirely from via boards (as they seem to have picked it
up from AMD code without using it themselves), and make it
default to false for all boards.
Some romstages used to set this to "true" (ie. "print debug output"),
but I didn't follow up on it in Kconfig - if you need it to debug CAR,
enable it yourself.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5896 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is needed for Gentoo gcc-4.1.2 to build the i945 code. A warning is
thrown because the comparison in the last hunk is between u16 and -1 and
can never be true.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5895 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
copy&paste, without actually being used.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5894 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Both chipsets use the src/northbridge/intel/i945 code but that code
needs to know which chipset is actually used. Having separate
NORTHBRIDGE_ options allows the I945GC/I945GM choice to be removed
since code can test the NORTHBRIDGE_ option directly.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5893 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use some more #defines instead of hard-coding values.
- Merge multiple movl/orl or movl/andl lines into one where possible.
- Add some TODOs in places which seem to have either an incorrect
code or incorrect comment.
- Fix typos: s/for/from/, s/BSC/BSP/, s/size/carsize/.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5890 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, whitespace fixes, consistency fixes, and drop some of the less
useful comments.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5888 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Replace $0x200 with $MTRRphysBase_MSR(0) etc. Also, move some #ifdef stuff
a little bit around (should not affect any functionality) to make the
Intel/AMD/VIA CAR implementations more similar and easier to compare.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5887 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
at the same time let the user specify sources instead
of object files:
- objs becomes ramstage-srcs
- initobjs becomes romstage-srcs
- driver becomes driver-srcs
- smmobj becomes smm-srcs
The user servicable parts are named accordingly:
ramstage-y, romstage-y, driver-y, smm-y
Also, the object file names are properly renamed now, using
.ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently.
Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't
easily fit in the build system and aren't useful anyway.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coreystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
For the a number of the socket 940 based machines, I collapsed their CAR
configurations into the socket config.
However, I have kept a number of overrides in place for the following
machines:
* broadcom/blast
* ibm/e32{5,6}
* newisys/khepri
* sunw/ultra40
* tyan/s488{0,2}
These machines used different setting than the defaults for socket 940
systems.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5883 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This change is somewhat dangerous as it enables CAR for some boards that
it was not enabled for before.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5882 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The fill_processor_name() function was duplicated in multiple
model_*_init.c files, move it into a new src/cpu/x86/name
directory.
The strcpy() function was also duplicated multiple times, move it
to <string.h> where we already have similar functions.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5879 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
We don't surround the <usbdebug.h> #include with those checks in other
places either. Abuild-tested.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
configs. I just moved it the the CPU that they all use.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5871 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
mainboard that uses it.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Now we only need to clean out the FAM10 stack mess and we're good to go with a
uniform RAMBASE.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5864 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
USB port for use as Debug Port (on chipsets which support that).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5860 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
few more code comments to src/cpu/x86/*.inc files.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5859 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
that component rather than the mainboard.
The intel/d810e2cb is the only board using the i82801bx southbridge.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5856 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Most of the mainboards with i82801gx SBs seem to use the
HAVE_HARD_RESET, which is already selected in the i82801gx SB config.
Removing it from some of those boards should be a functional no-op.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5855 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
All Intel CPU models appear to be identified with the form
INTEL_CPU_MODEL_xxxxx. I haved changed the Atom to fit this normal form.
A side effect is that the CPU doesn't need to be listed on the boards
that support it since the socket identifies the CPUs it supports.
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5853 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
is selected that uses a chipset which actually has that functionality _and_
we have code to initialize the Debug Port in coreboot (for that chipset).
Also, remove the duplicate list of PCI IDs and just link to the wiki page at:
http://www.coreboot.org/EHCI_Debug_Port
The list is now less useful in the kconfig help as this option will only
appear for those boards where it's actually supported.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use PCI_COMMAND and PCI_COMMAND_MEMORY from pci_def.h instead of
hardcoding their values.
- SB600/SB700: Drop useless/unused SB600_DEVN_BASE and SB700_DEVN_BASE.
- ICH7: Drop unused EHCI_CONFIG_FLAG and EHCI_PORTSC.
- s/uint32_t/u32/.
- Cosmetics, whitespace, coding style fixes and added code comments.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5847 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5846 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Build-tested using abuild.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Some boards still used the old DEBUG_RAM_SETUP (without _CONFIG prefix).
Also, consistently use "#if CONFIG_DEBUG_RAM_SETUP" (not #ifdef) as we do
elsewhere.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5843 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop unused DBGP_DEFAULT #defines on boards with chipsets where no
USB Debug Port support is implemented anyway (at the moment, at least):
- hp/dl145_g3
- hp/dl165_g6_fam10
- ICH7: Move unrelated code out of set_debug_port(). All ICH southbridges
with Debug Port hardcode the physical USB port used as Debug Port to 1.
In other words, this port is not user-configurable (as seems to be
the case on NVIDIA MCP55). For now we keep the 'port' parameter in order
to not change the API, this might be fixed differently later.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5842 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
wonder why variables in .data or .bss (both somewhere in ROM space)
are wrong.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5841 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Three CAR implementations on Intel CPUs include <cpu/amd/mtrr.h>, which
is obviously wrong, so drop the #includes. None of their #defines are used
in the Intel code.
Build-tested with two of the affected boards.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5840 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
statement to those files that actually need it. This significantly
reduces the number of dependencies, so it's no longer extremely ugly to
specify them manually (see the src/pc80/Makefile.inc portion)
- Add double include guards around option_table.h defines
- Also, drop the AMD DBM690T work around for the issue
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5838 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also fixes random whitespace issues, typos, etc.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5837 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the device tree, instead of using hardcoded values.
If this changes behaviour, this is either
- a bug in mptable_write_buses(), or
- a bug in the old mptable or device config, that is
they were inconsistent.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5835 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5834 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Without a (currently) dummy set_debug_port() function the build fails,
this may or may not be fixed differently in the future.
Manually build-tested on all SB600/SB700 boards, and tested on hardware on
one SB600 board I own, works fine.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
another recent change into account.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5832 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Original patch was
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Updates to accomodate changes in coreboot are
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5831 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add missing license headers, or missing (C) lines to various files.
(most are from AMD / Yinghai Lu, based on svn logs)
- src/include/ehci.h was taken from the Linux kernel. Updating it to
the latest version from git HEAD while I'm at it (build-tested with
one board). It also sports some new EHCI 1.1 addendum #defines which
we may or may not need.
This new file also already has a proper GPL header.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
used for source level debug.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5827 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The 'delay' variable shadows the global 'delay()' function, yielding
this compiler warning/error:
src/pc80/../lib/usbdebug.c: In function `ehci_reset_port':
src/pc80/../lib/usbdebug.c:281: error: declaration of `delay' shadows a global declaration
src/lib/delay.c:9: error: shadowed declaration is here
This fixes the issue by renaming the 'delay' variable to 'delay_ms'.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5826 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
consits of weak function which always exists (with defaults) and a possibility to
override this with normal function in main.c. This is the other way of
doing that and not using the devictree.cb.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5825 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
After we splitted up the old i82801xx driver which was supposed to support
multiple generations of ICH* chipsets, some of the generified code
is now obsolete in i82801ax which should only cover ICH/ICH0 and none of
the later ICH* generations.
Hence:
- Drop "struct pci_driver" entries for chipsets other than ICH/ICH0.
- Drop drivers for hardware that is not present on ICH/ICH0: NIC, SATA, EHCI.
- Drop PIRQE-PIRQH #defines and code, not available on this chipset.
- Simplify some parts of the code (more will follow).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5824 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5821 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Resolves a number of TODOs items within, and clarified a number of other TODOs.
Change register_values[] from long to u8 (byte). For what we are doing
this is sufficient and makes it only 1/4 the size.
Remove a hard-coding of SDRAMC register that is redundant and now
incorrect, now that SDRAMC is conditioned on SDRAMPWR_4DIMM Kconfig
and set through register_values[].
This fixes all boards with 3 DIMM slots (e.g. ASUS P2B, A-Trend ATC-6220).
RPS registers are now set in runtime code; remove it from
register_values[] table.
Bring DUMPNORTH() back. The code it refers to is still there.
Move #define of NB up so the DUMPNORTH() macro can use it.
Signed-off-by: Keith Hui <buurin@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5820 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
On this board all reads from SPD return 0xff by default, there's a custom
GPIO fiddling needed to enable access to the SPD SMBus offsets at
0x50-0x53. While coreboot actually sort of booted sometimes before r5193,
that was just sheer luck as the RAM init was hardcoded in certain ways.
Since the proper, more heavily SPD-based RAM init the brokenness of the
ASUS P3B-F RAM init was becoming visible.
This patch uses GPIOs to enable access to the SPD SMBus offsets,
and resets the GPIOs again after RAM init (this is needed to allow for
lm-sensors to work, for example).
Tested successfully on hardware.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Idwer Vollering <vidwer@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5819 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Root cause: After function STOP_CAR_AND_CPU disables cache as
ram, the cache as ram stack can no longer be used. Called
functions must be inlined to avoid stack usage. Also, the
compiler must keep local variables register based and not
allocated them from the stack. With gcc 4.5.0, some functions
declared as inline are not being inlined. This patch forces
these functions to always be inlined by adding the qualifier
__attribute__((always_inline)) to their declaration.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5818 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Acked-by: Scott Duplichan <scott@notabs.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5817 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
newer Phenom II.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
of 'Erratum 343 for AMD Fam10h CPUs' (rev 4345). The original code
sets msr c001_102a bit 3 when bit 35 was intended.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5814 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5813 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
svn copy amd/mahogany iei/kino-780am2-fam10; then apply the patch.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5812 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to make sure MMCONF is set up before use. Otherwise, PCI config
accesses run before init_cpus() will be lost if MMCONF is enabled
(unless explicitly done as port-based accesses).
This obsoletes removal of RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x78) in
mcp55_early_setup, so reinsert.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5810 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5802 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
CS5536, ITE IT8712F). Board support is based on the SpaceRunner-LX
(with tiny bits from the RoadRunner-LX) even though the hardware really
was the ancestor of our three other -LX boards and in fact among the
earliest Geode-LX boards on the market. (Might even have been the first
Geode-LX EPIC?)
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5801 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Noticed-by: Uwe Hermann
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5799 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
initialization. It can reduce KBC init time by up to 400 ms on
real hardware, and by a minute or so on AMD simnow.
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
fixes a few alignment wrinkles and sets up and registers the MMCONF area
for AMD Fam10h CPUs (where selected by mainboard configuration). It
removes a bit of code that proved troublesome in MMCONF setups from
mcp55_early_setup_car.c, as per earlier discussion.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5796 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This redirects that output to the console and implements a basic
keyboard stub.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5793 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Fix a typo, too.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numscale.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5792 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to using ram, so something like the appended is perhaps more
appropriate. Confirmed to work on hw.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numscale.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5791 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
initialization. Not all payloads require it and some keyboards take a
long time to init.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5789 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ready (PSON gating). Some boards boot faster than this power well
stabilization, and thus see bad data when accessing the smbus
registers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5788 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
For boards where timer2 is unusable, there's still the IO based
initialization available using the Kconfig option TSC_CALIBRATE_WITH_IO
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5787 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Removing the code preloading reduces the boot time.
Preload code is enabled when doing CARTEST (not exposed
to Kconfig given that it's a pure debugging measure)
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5786 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Geode-LX, CS5536, ITE IT8712F), based on very similar SpaceRunner-LX.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5782 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and SB600.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5781 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5780 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
coreboot_ram can be unpacked to 1MB. The value is quickly
replaced with the real value later, thus causing no harm.
Move RAMBASE to the default of 1MB for the affected boards
Signed-off-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5779 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
0xc0000-0xfffff, have coreboot qemu support enable the memory range at
startup.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
platform specific value. Before that, we can set it manually if the boards
need to run in a higher frequency, which has been tested on Tilapia.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Zheng Bao <zheng.bao@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5777 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Kerry She <Kerry.she@amd.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5776 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
standard BIOSes RRLX0013 and SRLX0013. Specifically move SPI and PME
I/Os to 0x1228 and 0x298 and switch SIO watchdog to ext. 48 MHz CLKIN.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5775 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to those files that actually need it. This significantly reduces the number of
dependencies, so it's no longer extremely ugly to specify them manually (see
the src/pc80/Makefile.inc portion)
Also, drop the AMD DBM690T work around for the issue.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5762 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
would rather not have mainboard settings like sio_gp1x_config in the
device tree anyway. So found a nice united home for both in Kconfig,
where users can change them without having to mess around in the C code.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5760 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
be used in write levelization training.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This should be unproblematic, as there are other boards with the same "socket"
that work with CAR already. Tests are highly appreciated though!
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5755 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kconfigs from within the choice/endchoice block. This makes it possible to
define user visible board specific options. Moved all vendor names and PCI
ids to the vendors' Kconfigs. Now all options in each file depend on the same
symbol, so replaced all "depends on"s with a single "if". Sorted boards
(sort -d), cleaned whitespace.
This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is
always "y" and never used. It it simply needed to have something to attach
the boards' "select" statements to.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The 1.2GHz model has CPUID F29. This adds them to the list of CPUs for that socket.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This patch likely breaks the following two boards since it unconditionally
activates CAR code for this socket:
* digitallogic/adl855pc
* intel/mtarvon
stepan suggests moving those two boards over to CAR, too, so we don't have to
worry.
---
src/cpu/intel/socket_mPGA479M/Kconfig | 1 +
src/cpu/intel/socket_mPGA479M/Makefile.inc | 2 ++
2 files changed, 3 insertions(+), 0 deletions(-)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5750 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- HAVE_HIGH_TABLES
- HAVE_LOW_TABLES
- FALLBACK_SIZE
Jens Rottmann sent an almost identical patch at the same time, so
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5745 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
chipset support it. But this involves a long list of 'depends', which you have
to remember updating manually. Converted this into HAVE_... properties, which
will be inherited automatically if someone copies a chipset to create a new
one.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Odd. The others don't.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5742 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- prevent GCC from inlining do_ram_command - it will break RAM initialization.
- fix the PCIRST# mechanism in those boards that do it, it requires 200ms, not
200us
- move PCIRST# as early as possible (before ich7_enable_lpc)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5740 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* DRAM initialization done message is now printed in debug-mode only, rather than everytime.
Signed-off-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
3.74 June 2010 for errata 351 and it agrees with the comment on
setting ForceFullT0= 000b but I believe the code didn't honor the
comment.
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5736 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revision Guide for AMD Family10h processors (#41322) rev 3.74 June 2010
with patch.erratum414 it stops here (next patches don't make it get further,
but they're needed according to documentation, don't break anything for me and
I still don't have a solution for booting, so I'm keeping them there in case
they fix something.
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Loading stage image.
Check CBFS header at fffffd2e
magic is 4f524243
Found CBFS header at fffffd2e
Check fallback/romstage
CBFS: follow chain: fff00000 + 38 + 15b41 + align -> fff15b80
Check fallback/coreboot_ram
Stage: loading fallback/coreboot_ram @ 0x200000 (1114112 bytes), entry @
0x20000
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5733 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revision Guide for AMD Family10h processors (#41322) rev 3.74 June 2010
with this one it stops here or earlier (as soon as before the patch,
sometimes):
*** Yes, the copy/decompress is taking a while, FIXME!
v_esp=000cbf48
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region:
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5732 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
processors (#41322) rev 3.74 June 2010 says to set the register
to 1 before CAR and to 0 after. We were setting it to 0 after CAR,
but not to 1 before.
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
While reviewing impact of this change it seems code for erratum 531 was not in
sync with current docs. I have checked uses of AMD_FAM10_ALL, but I
haven't looked up the docs for all of them, at first sight it seems ok
to include all FAM10 revisions in this mask.
Apply errata 531 only to revisions listed in Revision Guide for AMD Family10h
processors (#41322) rev 3.74 June 2010. Before it was applied also to
DR-B0, DA-C3 or HY-D0 which are not affected according to current docs.
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5729 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
I removed the gpio asserts - I think those are not used here.
The pcie 1x slot works, the x1 card I have does not work in 16x slot, but in orig bios I cannot see it any slot, so it is kind of better.
The classic PCI slot works fine too. However it seems SATA has some issues.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Trying to keep it simple: Two sizes are expected equal so use same %x for both.
Cast to unsigned int to make sure it fits.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
notices. Getting it into the tree so people can get to it.
Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5717 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
http://www.gigabyte.cn/products/product-page.aspx?pid=3118#ov
the simple config is
AM2+DDR2+SB700+RS780, the superIO is IT8718F
The patch has been tested with SeaBIOS + SUSE11.2
Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5715 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
detected by the existence of dev3. Some other RS780 mainboard has
the same function. The patch added the function to make these boards work
smoothly.
Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com>
Acked-by: Zheng Bao <zheng.bao@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Details of the hardware configuration can be found at
http://www.gigabyte.com/products/product-page.aspx?pid=3478
Brief configuration is:
1. CPU:Support for AM3 processors: AMD PhenomTM II processor/ AMD Athlon™ II processor
2. North Bridge: AMD 785G
3. South Bridge: AMD SB710
4: Super IO : ITE8718F
The mainboard has two bios flashchip. Coreboot ROM should be flashed into the
M_BIOS (which means main bios).
Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5713 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
kind. Move it to drivers and make the necessary adaptions. Also drop empty
drivers/generic/generic and start cleaning up Makefiles in drivers/
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5710 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5707 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5705 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5703 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
After lots of testing, the SuperIO LDN 7, register 0xEF is the key to the
problem. This patch adds a function which stops dual bios mainboards from
rebooting, when called.
Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5697 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop lots of dead code from the various cache_as_ram.inc files.
- Use some descriptive macros instead of magic numbers for MTRR MSRs
- drop unused duplicate descriptors from romstage GDT
- slightly reformatting code and comments
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5696 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
pretty much 1:1 the same file (despite an include and a typo) so drop one
instance of it. We only have one prologue.inc for the romstage code now.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5694 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The bit 15 seems to be a new feature when CPU started to have more than 4
cores.
Zheng
Yes, this was add for revD.
Marc Jones
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5684 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
board porter: printk should always be available in CAR mode.
Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board
but it's not been used there. Very odd.
There is one usage of CONFIG_USE_INIT which was always off in
src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with
those few lines.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revert until someone with the boards refactors it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Fix up converted mainboards that still used early_mtrr_init()
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5678 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
that causes CAR to hang, provide more debugging output wrt memory size,
and correct the numbering on the ram init sequence.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5677 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- make SMM relocation debugging Kconfig accessible
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5676 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also clean up gx2def.h and geode_post_code.h a little.
abuild tested and boot tested on a Wyse S50.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5671 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Part of converting GX2 to use CAR.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5670 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5669 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Justification:
- dbm690t isn't actively developed (no new warnings will be introduced)
- having this board fail clutters the mailing list
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Nils Jacobs