Enabling VT-d on pre-QS silicon may have issues like rendering the
Thunderbolt driver useless. This change will ensure that VT-d is
disabled for pre-QS silicon and enabled for QS.
BUG=b:152242800,161215918,158519322
TEST=Validated VT-d is disabled for pre-QS (cpu:0x806c0) and enabled for
QS (cpu:0x806c1). Kernel walks through ACPI tables. If VT-d is disabled
and no DMAR table exists, IOMMU will not be enabled.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I98a9f6df185002a4e68eaa910f867acd0b96ec2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
BOOL type Kconfig values should be used through the CONFIG() macro.
These instances were not, so update them.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ie4706d82c12c487607bbf5ad8059922e0e586858
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Set power limits in devicetree for Tiger Lake Y-SKU based volteer
variant boards.
BUG=b:152639350
BRANCH=None
TEST=Built and tested power limits on volteer variant board.
Change-Id: If4f1226473b48365e5962df9fff29910c99007fc
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43607
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates Tiger Lake SA DID and report platform. According to
doc #613584, remove PCI_DEVICE_ID_INTEL_TGL_ID_U_1 and add below
definitions of SA ID for TGL-UP4 skus:
TGL-UP4(Y) (4+2): PCI_DEVICE_ID_INTEL_TGL_ID_Y_4_2 0x9A12h
TGL-UP4(Y) (2+2): PCI_DEVICE_ID_INTEL_TGL_ID_Y_2_2 0x9A02h
Change-Id: Id9d9c9ac3bf39582b0da610e6ef912031939c763
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43061
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SataPortsEnableDitoConfig Enable DEVSLP Idle Timeout settings DmVal and
DitoVal. SataPortsDmVal and SataPortsDitoVal helps to determine when to
enter Device Sleep. Device Sleep enables the host bus adapter (HBA) to
assert the DEVSLP signal as soon as there are no commands outstanding
to the device and the port specific Device Sleep idle timer has expired.
Device Sleep Idle Timeout values (PxDEVSLP.DITO and PxDEVSLP.DM) are
port specific timeout values used by the HBA for determining when to
assert the DEVSLP signal. They provides a mechanism for the HBA to apply
a programmable amount of hysteresis so as to prevent the HBA from
asserting the DEVSLP signal too quickly which may result in undesirable
latencies. This patch is created based on Intel Tiger Lake Processor
PCH Datasheet with Document number:575857 and Chapter number:12.
* PxDEVSLP.DM -> SataPortsDmVal: Enable SATA Port DmVal DITO multiplier.
Default is 15.
* PxDEVSLP.DITO -> SataPortsDitoVal: Enable SATA Port DmVal DEVSLP Idle Timeout
(DITO), Default is 625ms.
BUG=b:151163106
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: I6a824524738a9e0609f54bea9d892b4a42a1d3db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42214
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On ChromeOS systems with a serial-enabled BIOS and vboot writing a new
firmware image to the Chrome EC, it was possible for the TCO watchdog
timer to trip 2 times before tco_configure() was called in romstage.
This caused an extra reboot of the system (at a rather inopportune time)
and because the EC didn't perform a full reset, the system boots into
recovery mode.
This patch moves the call to tco_configure() for Tiger Lake from
romstage to bootblock, in order to make sure the TCO watchdog timer is
halted before vboot_sync_ec() runs in romstage. It should be harmless to
configure the TCO device earlier in the boot flow.
BUG=b:160272400
TEST=boot Volteer (to a non-recovery kernel!) with a freshly imaged EC
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iefdc2c861ab8b5fde7f736c04149be7de7b3ae0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43313
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds Type-C Intel Input Output Manager(IOM) device with HID
INTC1072. It provides MMIO range from 0xfbc10000 with size 0x1600.
Intel Input Output Manager(IOM) kernel driver reads relevant
information such as Type-C port status (whether a device is connected
to a Type-C port or not) and the activity type on the Type-C ports
(such as USB, Display Port, Thunderbolt) using this memory resource.
BUG=b:156016218
TEST=Able to detect USB, TBT and USB4 on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ic733e831643bda6e052edf797ba0e6206eb4ddd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41762
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds Type-C IO Manageability engine base address and size.
Tigerlake EDS(#575681) section 3.4.3 describes host bridge
REGBAR(MCHBAR) + 7110h for IOM REGBAR with size 1600h. IOM has a
port ID 0xc1. MCHBAR is programmed with 0xfedc0000. IOM REGBAR is
determined from mmio (MCHBAR + 0x7110), which has value 0xfb000000.
IOM has base address 0xfbc10000 from IOM REGBAR + (0xc1 << 16).
BUG=🅱️156016218
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I70d88ba318087f7acacd1ee84609c9db5b65f907
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41759
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new IGD device ID for new Tigerlake SKU support.
BUG=b:160394260
Branch=None
TEST=build, boot and check IGD device is reported.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I1903d513b61655d0e939f80b0fd0108091fdd7e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Intel Dynamic Tuning Technology is the name of a PCI device on some
Intel SoCs. This minimal PCI driver is only used now for SSDT generation
on TGL devices.
Change-Id: Ib52f35e4e020ca3e6ab8b32cc3bf7df36041926e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41893
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change disables Thunderbolt PCIe root ports bus master before
handing over to payload in order to mitigate the threat from the
unauthorized external DMA. In this state, the PCIe root ports would
be considered as trusted to not forward any DMA transactions to
downstream endpoint devices.
BUG=b:141609884
TEST=Verified PCIe resource has been allocated properly and USB behind
Thunderbolt dock is enumerated successfully.
Change-Id: I9650b9dd4df1f9bee53ae3737b7bf60b2ef8017b
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
For both Tiger Lake and Jasper Lake, add the DEVFN for Image Processing
Unit (IPU) to soc_acpi_name, which is set to return "IPU0".
Change-Id: Ib11be5be7fbaec688d8788945a3bcab3f8d834a1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42878
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for TGL:
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:159195585,b:152936481,b:156435028
TEST=build.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If69087e5e189b3e0f70e5f1afbfe3f884173d3b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
In some cases, the SoC did not even select `REG_SCRIPT` in Kconfig.
Change-Id: I617f332b80c534997e06a91247d1be90a85573be
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
A UPD HybridStorageMode allows a platform to dynamically configure the
PCIe strap configuration required if an Optane device is connected.
The strap configuration is done by HECI commands between FSP and CSE to
override the default PCIe strap value, and the updated strap value is
stored in SPI RW data to be used on the next boot.
CSE Lite supports the strap override when running on CSE RW partition,
while CSE RO partition does not support it because CSE RO is not allowed
to access SPI RW data. The strap override failure on CSE RO causes FSP
not initializing PCH Clkreq and PCIe port mapping and this results NVMe
and Optane initialization failure.
By disabling HybridStorageMode in case of CSE RO boot, NVMe detection is
done by the default PCIe configuration and Optane is detected as a
single NVMe storage device on CSE RO boot in recovery mode. Both NVMe
and Optane devices detection as well as OS installation to these storage
devices are verified on CSE RO boot in recovery mode.
BUG=b:158643194
TEST=boot and verified with tglrvp and volteer in recovery mode
Cq-Depend: chrome-internal:3100721
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I5397cfc007069debe3701bf1e38e81bd17a29f0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42282
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds Platform-Wide _OSC capabilities for native USB4
support. There is Engineering Change Request (ECR) with _OSC addition
for OSPM USB support. ACPI section 6.2.11.1.13 is modified with bit 18
as native USB4 support. The OS sets this bit to indicate support for
an OSPM-native USB4 Connection Manager which handles USB4 connection
events and link management. The OS use the _OSC mechanism and the bit
defined in this ECR to obtain configuration and connection management
capabilities of USB4 connections. This change also fixs the byte index
for the DWord-addressable field CDW3 from the capabilities buffer.
BUG=b:140645231
TEST=Check Type C device all ports connection/enumeration with SW CM.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1b561ea5a0a6b440cca3152cc150f31abf7766ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enables Thermal Control Circuit (TCC) activation feature to set
tcc_offset to new value in devicetree.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value.
Change-Id: I36b0d6aad4be8a9cbb145dcd66d65235d3f6ac35
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Bring all GNVS related initialisation function to global
scope to force identical signatures. Followup work is
likely to remove some as duplicates.
Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add CpuReplacementCheck to chip options to control UPD FSPM
SkipCpuReplacementCheck from devicetree.
This UPD allows platforms with soldered down SoC to skip CPU
replacement check to avoid a forced MRC traning.
TEST=boot and verified with volteer
Change-Id: Ic5782723ac3a204f2af657fac9944fb41fc03f4d
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42788
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects dereferencing pointers that might be "NULL" when
calling acpigen_write_scope and acpigen_write_device. Add sanity
check for both of scope and name to prevent NULL pointer dereference.
Found-by: Coverity CID 1429981
TEST=Built and boot up to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Iea3801585e8c294fb889a8137b534bb932696025
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42836
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pmc_set_acpi_mode() should run after Chrome EC dealt with all host event
bits, like SMI mask (otherwise the FAFT firmware_FWScreenCloseLid test
will fail).
BUG=b:153249055
TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage
Change the GBB flag to 0x140 then check SMI mask during depthcharge
phase, make sure it's 0x0000000000000001.
Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com>
Change-Id: Icfff5cc5550f23938343e4d26ef76093bb9cf7c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Not all FSPs based on FSP 2.1 supports the feature of external PPI
interface pulled in via FSP_PEIM_TO_PEIM_INTERFACE.
Deselect FSP_PEIM_TO_PEIM_INTERFACE when PLATFORM_USES_FSP2_1 is
selected.
Update Kconfig of SOCs affected (icelake, jasperlake, tigerlake).
Change-Id: I5df03f8bcf15c9e05c9fd904a79f740260a3aed7
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The dmesg shows unresolved symbol CDW1 with AE_NOT_FOUND error after
booting to kernel. Fix the error by properly creating the buffer field
CDW1 to cover all errors scenarios.
BUG=b:140645231
TEST=Verified no AE_NOT_FOUND error related to \_SB.OSC.CDW1.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ibfe677f87736ce1930e06b9cd649791977116012
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42693
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide CmdMirror option in chip.h so that it can control CmdMirror FSP
UPD via dev tree.
BUG=b:156435028
BRANCH=none
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Idae9fa439f077f8f3fb16fe74c2f263c008cd5f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42276
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Using guidance from Intel, a new set of power limits (PL1, PL2 & PL4)
are available for TGL-U. They are dependent upon the SKU of the CPU
that the mainboard is running on. Volteer is updated here to use these
new limits.
To accomplish this, the SoC chip config's power_limits_config member
was expanded to an array, which can be indexed by POWER_LIMITS_*_CORE
macros. Just before power limits are applied, the correct set of them
is chosen from the array based on System Agent PCI ID. Therefore, a
TGL board should have two sets of power limits available in the
devicetree.
BUG=b:152639350
TEST=On a Volteer SKU4 (4-core), verified the following console output:
CPU PL1 = 15 Watts
CPU PL2 = 60 Watts
CPU PL4 = 105 Watts
Change-Id: I18a66fc3aacbb3ab594b2e3d6e2a4ad84c10d8f0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
This change updates platform.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for volteer.
Change-Id: I248f5e9a1e3ba4f6426167f0406073252cc6513a
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42506
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support for SW CM. Add Operating System Capabilities
(_OSC) method to enable USB/DisplayPort/Inter-domain USB4 Internet
Protocol tunneling and enable PCIe tunneling as well. Remove Connect
Topology(CNTP) command because kernel driver directly works with SW CM
Thunderbolt firmware. Update _DSD method for USB4 support across XHCI
and PCIe root ports.
BUG=b:140645231
TEST=Check Type C device all ports connection/enumeration with SW CM.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I859c5075882e40d7be30d4ba88cc825886712b74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms
and update volteer speficic dsdt.asl file accordingly. The Linux kernel
driver expects these new acpi device ids for dptf functionalities.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings (~36 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~25 ms for an extra overhead of ~1KiB.
LZ4 Compression:
fsps.bin 0xe6fc0 fsp 254262 LZ4 (290816 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 712,361 (1,072)
18:finished LZ4 decompress (ignore for x86) 750,695 (38,334)
LZMA Compression:
fsps.bin 0xe6fc0 fsp 253415 LZMA (290816 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 707,696 (1,150)
16:finished LZMA decompress (ignore for x86) 767,763 (60,067)
BUG=b:158034451
TEST=Build and boot volteer mainboard.
Change-Id: I91e33eb7b688b5383f3a0075a28ac21250314973
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42444
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for enabling/disabling PCIe hot-plug via
a chip config option PcieRpHotPlug, which is copied to the corresponding
FSP-S UPD.
BUG=b:156879564
BRANCH=none
TEST=Boot Volteer/RVP with FSP log and check hotplug enabled/disabled
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4c0187644b6ca9735f1b159e110e3466af14ff71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41794
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Attempts to write to APM_CNT IO port should always be guarded
with a test to verify SMI handler has been installed.
Immediate followup removes redundant HAVE_SMI_HANDLER tests.
Change-Id: If3fb0f1a8b32076f1d9f3fea9f817dd4b093ad98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41971
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we plan to use VMX, enable CPU_INTEL_COMMON.
BUG=b:157388365
TEST=tested on Volteer
Signed-off-by: Alex Levin <levinale@chromium.org>
Change-Id: I5e7bdb4310947dd8a94ee554834a67ce94377ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
For Tiger Lake platforms, this patch set provides a way to override PCH
external VR settings and ext rail voltage/current through devicetree.
This enables setting of optimal settings for FIVRs for a particular PCH
type.
BUG=None
BRANCH=None
TEST=Build and boot volteer.
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ic55472d392f27d153656afbe8692be7e243bb374
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41424
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds Hot-Plug and power management event handers(_L61 &
_L69) respectively for Thunderbolt in the GPE scope. The _L61 method
invokes sub-method HPEV to support Hot-Plug wake event from Thunderbolt
PCIe root ports. This method intercepts Presence Detect Changed
interrupt and make sure the L0s is disabled on empty slots. The _L69
method checks and clears root port's PME SCI status.
BUG=b:156435065
TEST=Verified multiple hot plug successfully with Lenovo dock.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I022cf4aa3f2ee459b9dc87849494e10755d995c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The Connect Topology Command(CNTP) is sent with default timeout value
(0x1388) along with FW CM. The CNTP is supposed to be skipped while
using SW CM. While transition from FW CM to SW CM, the default timeout
value could cause boot time delay up to ~10 seconds. Set this FSPS UPD
ITbtConnectTopologyTimeoutInMs to be 0 in order to avoid the 10 seconds
delay. Future FSP release will evaluate this ITbtConnectTopologyTimeoutInMs
value. While FSP finds this UPD value being 0, FSP will skip sending CNTP.
BUG=b:155893566
TEST=Built image with SW CM Thunderbolt firmware and verified no
outstanding delay time while using FSP v3197 during boot to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I47e3519fd818cb56e6abd16464d8370ffddabc5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42056
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With SoundWire and USB4 enabled some boards are running out of
memory with all of the ACPI devices and properties. Increase
the heap size to accommodate.
BUG=b:147462631
TEST=Successfully boot on volteer SKU5 board with SoundWire enabled,
before boot was failing with "Error! memalign: Out of memory"
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I0245bdfad93b381871514578e66640e7fe6fa5c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
As per JEDEC spec, manufacturer part name should be set to
blank (0x20). This change updates gen_spd.go to set bytes 329-348 as
0x20 and regenerates SPDs for TGL and JSL.
Change-Id: I6af18d89afd7264cec7e54b38e95df83d55aa058
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42023
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates gpio_op.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for Volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib54b3f7da828ce8d232fcea0639077970638f610
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for TGL and JSL:
1. MT53E512M32D2NP-046 WT:E
2. K4U6E3S4AA-MGCR
3. H9HCNNNCPMMLXR-NEE
4. K4UBE3D4AA-MGCR
BUG=b:157862308, b:157732528
Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that can be
used with TGL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating SPD
binary to add to CBFS.
BUG=b:147321551,b:155239397
Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Call out the CSME-initiated bits from HPR_CAUSE0 register and
update the elog to include reset causes
Change-Id: I32ffb55ff2ad26ec4e7609c41fc65e021a327a14
Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Right now all FSP2.0 based IA platform doesn't need this driver anymore
hence removing to avoid debug and maintenance effort.
TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms.
Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates pch_hda.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for Volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ia2bab6dcbac9eae76ac4258c44bb19425c8b5c80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: I6370e4b268331bfba5bc0392f27c560836b6ea72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Determine the TcssDma0 and TcssDma1 enabling based on TBT DMA
controllers setting.
BUG=🅱️146624360
TEST=Booted on Volteer and verified TcssDma0 and TcssDma1 enabling.
lspci shows TcssDma0(0d.2) and TcssDma1(0d.3).
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I61ac4131481374e9a2a34d1a30f822046c3897fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41812
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ChromeOS EC is adding new entries to its USBC.CONx devices (see later
patch), and it needs to get access to the PMC.MUX device so that its
ACPI path can be retrieved. This provides a weak function to return NULL
for all Intel SoCs except for Tiger Lake, which locates the device if it
is found in the devicetree.
Change-Id: I3fe3ef25e9fac8748142f5b1bd870c9bc70b97ff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40948
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In an attempt to help reduce the amount of static ASL files that are
littered throughout the codebase, pmc.asl was converted to runtime SSDT
generation instead. If future SoCs reuse the same PMC, then this
function can be moved to soc/intel/common/block/pmc for example.
TEST=Verified the following was in the decompiled SSDT:
Scope (\_SB.PCI0)
{
Device (PMC)
{
Name (_HID, "INTC1026") // _HID: Hardware ID
Name (_DDN, "Intel(R) Tiger Lake IPC Controller")
Name (_CRS, ResourceTemplate ()
{
Memory32Fixed (ReadWrite,
0xFE000000, // Address Base
0x00010000, // Address Length
)
})
}
}
Also the following found in linux's /var/log/messages:
"acpi INTC1026:00: GPIO: looking up 0 in _CRS", indicating the PMC
ACPI device was found and its _CRS was locatable.
Change-Id: I665c873d8a80bd503acc4a9f0241c7a6ea425e16
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Current implementation returns the incorrect GPIO community PID.
The GPIO community index 3 should return PID for COMM_4 and index
4 should return PID for COMM_5.
TEST=Verify PCR port id is correct for each community.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5dc48e5b31f43853b3a613c17f13f7df71f1fbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41725
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use CAPID0_A to provide information closer to reality.
* Correctly advertise ECC support, max DIMM count and max capacity
* CAPID0_A hasn't changed since SNB, but most EDS mark the bits as
reserved even though they are still used by FSP.
* Assume the same bits for Tiger Lake as for Ice Lake
* Assume the same bits for Skylake as for Coffee Lake
* Add CAPID0_A to Icelake headers
The lastest complete documentation can be found in Document: 341078-002.
Change-Id: I0d8fbb512fccbd99a6cfdacadc496d8266ae4cc7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
It never was in GNVS, it never belonged among the ACPI tables. Having
it in CBMEM, makes it easy to look the location up on resume, and saves
us additional boilerplate.
TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and
intel_backlight + acpi_video synchronize, both before and
after suspend.
Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In Tiger Lake we have support for enabling MIPI clocks at runtime in
ACPI. Hence remove setting pch_islclk from devcietree and chip.h.
Also update functions which reference pch_isclk.
BUG=b:148884060
Branch=None
Test=build and boot volteer and verify camera functionality
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I6b3399172c43b4afa4267873ddd8ccf8d417ca16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41570
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's already disabled by FSP default but disable VMD by devicetree
to remove dependency with FSP default setting.
BUG=None
Branch=None
Test=Build TGLRVP and boot up and check FSP log for checking VMD is
disabled.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ief81fe481b94abed9754881cf1f454999fafa52e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41061
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds FSP UPD D3HotEnable and D3ColdEnable for configuration.
D3Hot low power mode support is for TCSS xhci, xdci, TBT PCIe root
ports and DMA controllers. D3Cold is lower mode for TBT PCIe root
ports and DMA controllers with D3Hot->D3Cold transition.
BUG=🅱️146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I6782cde6a1bfe13f46e75db8c85537c6d62f5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
CPU to PCH method refers to PCH ACPI operation region which was wrongly
defined as SystemMemory and PCH_PWRM_BASE_ADDRESS. Change the operation
region to be SystemIO and ACPI_BASE_ADDRESS.
BUG=b:156530805
TEST=Built and booted to kernel.
Signed-off-by: John zhao <john.zhao@intel.com>
Change-Id: Ifa291a993ec23e1e4dfad8f6cdfabc80b824d20c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The Intel Tigerlake SoundWire controller has 4 master links which
are configured differently depending on the external crystal oscillator
which is connected to the PCH.
This function will read the PCH PMC EPOC register to determine the
frequency and then fill out the master link entries with the correct
table values.
The frequency is also provided directly in a custom "ip-clock" property
which will be added to the link descriptor and passed to the OS driver
so it can know the clock rate of the master.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PMC EPOC register indicates which external crystal oscillator is
connected to the PCH. This frequency is important for determining the
IP clock of internal PCH devices.
Add definitions that allow this register to be read and extract the
crystal frequency, and a helper function to extract and return this
as the defined enum.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ACPI device names for TCSS devices which were not already defined
which match those declared in the DSDT at acpi/tcss.asl.
Change-Id: I6a79da7dd78c73345986c12d6ffe467cd4322e05
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
pmc.c was included in the SMM object, but only needed the one function,
pmc_soc_set_afterg3_en. pmutil.c was already doing power management-
related functionality, and was included in SMM, so moving
pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the
SMM build.
Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Historically in coreboot, the PMC's fixed PCI resources were described
by the System Agent (the MMIO resource), and eSPI/LPC (the I/O
resource). This patch moves both of those to a new Intel SoC-specific
function, soc_pmc_read_resources(). On TGL, this new function takes care
of providing the MMIO and I/O resources for the PMC.
BUG=b:156388055
TEST=verified on volteer that the resource allocator is aware of and
does not touch these two resources:
("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0
flags f0000200 index 0
PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff
flags c0000100 index 1")
Also verify that the MEM resource is described in the coreboot table:
("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved")
Verified the memory range is also untouchable from Linux:
("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved")
Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update processor power limit configuration parameters based on
common code base support for Intel Tigerlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on volteer system
Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order for the SOC to be able to control the Aux line orientation for
Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs
to be configurable through devicetree to correctly set the GPIO pins that
the SOC should use to flip orientation.
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds FSP UPD TcssDma0En and TcssDma1En for configuration.
BUG=🅱️146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I04af970f74ab9dfe84f9c0c09ec2098e0093fa57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This is a missing config override in fspm_upd.
iDisplay Audio Codec disconnection
0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
BUG=b:156447983
TEST=None
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifbbc22d14e06713009c550cbe8a7292de64e1fdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41394
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CPU to PCH method refers to PCH ACPI operation region which was wrongly
defined as SystemIO. This causes ACPI AE_LIMIT error from PM _DSW
method. Change the operation region from SystemIO to SystemMemory to
resolve this execution failure.
BUG=b:140290596
TEST=Built and booted to kernel. _DSW method executes successfully without
ACPI AE_LIMIT error.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I3965c3d891f7d3cf4a448edc0c3f7e7749a905a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change uses cpu_phys_address_size() to calculate the size of high
MMIO region instead of a macro for each SoC. This ensures that the
entire range above TOUUD that can be addressed by the CPU is used for
MMIO above 4G boundary.
Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change sets the base for MMIO above 4G to TOUDD. It matches what
is used by resource allocator if MMIO resources are allocated above 4G
and also matches the expectation in northbridge.asl. This change
also gets rid of the macro ABOVE_4GB_MEM_BASE_ADDRESS since it is now
unused.
BUG=b:149186922
TEST=Verified that kernel does not complain about MMIO windows above
4G.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ibbbfbdad867735a43cf57c256bf206a3f040f383
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41155
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current Interrupt setting use 2nd parameters as device function number.
- Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
- Use irq number directly rather than irq definition as its number
is not for PCI device.
The issue found while enabling GBE and GBE interrupt is not working
without this change.
Reference
- ACPI spec 6.2.13 _PRT
- FSP reference code:
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/
ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/
PeiItssPolicyLibVer2.c
- BIOS reference code:
https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/
TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl
TEST=boot to OS with GBE enabled and check GBE interrupt
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pci_domain_set_resources is duplicated in all the SOCs. This change
promotes the duplicated function.
Picasso was adding it again in the northbridge patch. I decided to
promote the function instead of duplicating it.
BUG=b:147042464
TEST=Build and boot trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP provides the UPD's for SATA and DMI power optimization.
In this patch we are adding the soc's config support to set
those power optimization bits in FSP. By default those
optimizations are enabled. To disable those we need to set
the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1
in devicetree.
BUG=b:151162424
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
C-State latency table was exposed by both intel-idle driver and
BIOS/coreboot. And table in Kernel was used before.
After kernel patch (https://patchwork.kernel.org/patch/11290319/),
only BIOS/coreboot exposes C-State latency table through _CST.
As current C-State latency table info is not correct for Tigerlake,
update proper info according to BWG and reference code.
- Update latency: CpuPowerMgmt.h
Use BIOS reference code as values in BWG is not up-to-dated
- Remove MSR program for latency: BWG 4.6.4.3.4
Reference:
- TGL BWG #611569 Rev 0.7.6
- https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/
ClientOneSiliconPkg/Cpu/Include/CpuPowerMgmt.h
BUG=b:155223704
BRANCH=None
TEST=Boot to OS and check C-State latency
expected result
>cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency}
POLL
C1_ACPI
C2_ACPI
C3_ACPI
0
1
253
1048
For detail, refer Bug info.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8bf2976ad35b4cf6f637a99c26b4f98f9f6ee563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
PMC device name string "PMC" is added to platform soc_acpi_name()
for pmc driver.
BUG=b:151646486
TEST=Built and booted to kernel successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ida7fc7e2340f2a809464ca66fd1922f3229e2e18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This replaces GPLv2-or-later and GPLv2-only long form text with the
short SPDX identifiers.
Commands used:
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
That makes it easier to identify "license only" headers (because they
are now license only)
Script line used for that:
perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist...
Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Kernel pinctrl driver changed for Tiger Lake and went to old scheme.
Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/
third_party/kernel/+/2116670
BUG=b:151683980
BRANCH=none
TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl
verify INTC34C5:00 listing all the pins.
Cq-Depend:chromium:2116670
Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In addition to GBLRST_CAUSE0 and GBLRST_CAUSE1, print the value
of HPR_CAUSE0.
Change-Id: Idc57c3cd6a8d156c5544640898e8e7147d34c535
Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
PMC supports messages that can be used for configuring the USB
Type-C Multiplexer/Demultiplexer.
BUG=b:151646486
TEST=Booted to kernel on volteer board and verified PMC and Mux
agent devices identification.
Change-Id: I00c5f929b2eea5de3f8eba794dbe9b36c8083c52
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update interrupt setting based on latest FSP(3163.01)
Reference:
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/
ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/
PeiItssPolicyLibVer2.c
BUG=b:155315876
BRANCH=none
TEST=Build with new FSP(3163.01) and boot OS and login OS console
in ripto/volteer. Without this change, we can't login due to mismatch
interrupt setting between asl and fsp setting.
Cq-Depend: chrome-internal:2944102
Cq-Depend: chrome-internal:2939733
Cq-Depend: chrome-internal:2943140
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ibf70974b8c4f63184d576be3edd290960b023b1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40872
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Due to refactoring of Serial IO code in FSP v3163 onwards we need to
set SerialIoUartDebugMode UPD in FSP-M to SkipInit so that SerialIoUart
initialization is skipped in FSP. This makes sure that SerialIo
initialization in coreboot is not changed by FSP.
BUG=b:155315876
BRANCH=none
TEST=build and boot tglrvp/ripto/volteer and check UART debug logs
Cq-Depend: chrome-internal:2944102
Cq-Depend: chrome-internal:2939733
Cq-Depend: chrome-internal:2943140
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I8ba4b9015fa25a84b6b99419ce4d413c9d9daa44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40899
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves all ACPI table support in coreboot currently living
under arch/x86 into common code to make it architecture
independent. ACPI table generation is not really tied to any
architecture and hence it makes sense to move this to its own
directory.
In order to make it easier to review, this change is being split into
multiple CLs. This is change 3/5 which basically is generated by
running the following command:
$ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g'
BUG=b:155428745
Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree.
Filling this UPD will allow FSP to enable proper clksrc gpio
configuration.
BUG=None
BRANCH=None
TEST=Build and boot tglrvp.
Change-Id: Iad0ba94fea019623a5b98fff0cb4a2cd1d2a7bd7
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Check SPD is not NULL before print. This can prevent the system
from hanging up.
BUG=b:154445630
TEST=Check NULL SPD is not print.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Iccd9fce99eda7ae2b8fb1b4f3c2e635c2a428f04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40560
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds GPID, a helper method to look up GPIO community ID for
an index.
This patch also includes Intel's common GPIO ASL code. CGPM method in
the common code uses the GPID method introduced in this patch.
BUG=b:148892882
BRANCH=none
TEST="BUILD volteer and ripto"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Id6a00fb8adef0285d6bbc35cd5a44539bd3be6b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40478
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Pointer passed to print_spd_info() from meminit.c needs to be
dereferenced first, so this change dereferences it.
BUG=b:154352883
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, login to kernel and execute the following cbmem command:
localhost ~ # cbmem -c | grep LPDDR4X
and verify it returns "SPD: module type is LPDDR4X"
Change-Id: I5ff64121f0d50947c4946e9e02460dfb7319d01a
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
.write_acpi_tables() should not be updating the device structure. This
change makes the struct device * argument to it as const.
Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
For DDR4, FSP expects channel 0 to set SPD for index 0 and channel 1
to set SPD for index 4. This change adds a helper macro to translate
DDR4 channel # to the index # that the FSP expects.
BUG=b:154445630
TEST=Verified that memory initialization for DDR4 is successful.
Change-Id: I2b6ea2433453a574970c1c33ff629fd54ff5d508
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Add Type-C subsystem power management support for RTD3.
BUG=b:140290596
TEST=Include "tcss.asl" in platform "dsdt.asl" for coreboot build
with the firmware CM. Added acpi debug and booted to kernel. Probed
devices PM_STATE transition from D0 to D3 entry/exit while system at S0.
TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3, offset:0xA4, PM_STATE:D3HT.
xhci:00:0d.0, offset:0x74, PM_STATE:D0D3.
dma:00:0d.2/00.0d.3, offset:0x84, PM_STATE:PMST.
Verified xhci/dma/pcie root ports power runtime_status to be suspended and suspended
time tick through /sys/bus/pci/devices/bus:device:func/power.
Change-Id: I127d3700ad426a44639ee93b4477be6638b42e1b
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Remove explicit setting of iDisp Link parameters. These settings are
related to configuration for the link between HD-Audio controller and
Display unit for purposes of HDMI/DP Audio playback. During PO,
observed that without setting these params display part was not
binding. With the latest code verified that we dont need to explicitly
set these parameters anymore. HDMI/DP audio playback works fine with
default settings.
BUG=b:151451125
BRANCH:none
TEST= build and boot volteer/ripto and verify HDMI/DP audio playback
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jairaj Arava <jairaj.arava@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tigerlake platform does not have built in eMMC/SD support so all
this code is unused and can be removed.
Change-Id: I70ff983d175375171d5a649378f32f1062c0876d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40372
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TCSS TBT PCIE root ports scope type was mistakenly set to PCI_ENDPOINT.
Fix the scope type to be PCI_SUB.
BUG=b:141609884
TEST=Booted to kernel and verified no TBT PCIE root ports scope
type mismatch error in kernel log.
Change-Id: I844e7e9583992be496223fb51f24c5aa24fc7d21
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add a function to dump ME Host Firmware Status registers.
In tigerlake, Manufacturing mode is “No” if below conditions are satisfied, indicating
end of manufacturing. Otherwise, manufacturing mode is "Yes".
1. Intel fuses are programmed (Indicated by HFSTS6[30] bit set)
2. The SPI flash descriptor region is locked. (Indicated by HFSTS1[4] cleared)
BUG=None
BRANCH=None
TEST=Build and boot tglrvp.
Change-Id: I831a51f9f482425bd3b97ef1d2404b1d06844d07
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Make use of print_me_fw_version() which is defined in the CSE lib to
print ME firmware version information for icl,tgl.
BUG=None
BRANCH=None
TEST=Build and boot iclrvp, tglrvp boards.
Change-Id: Ief75403c490eee499a84372e54fa38ea3016cc11
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Add LTR and AER configuration to the root ports config.
BUG=b:151166040
TEST= build and boot volteer and check LTR and AER value
from FSP log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I668f2e5fea15019a9e5ae06fb4d55fa2aea69e8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40262
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some of the revision 4 FADT fields were already updated to ACPI
spec revision 6, but not all of them. In addition the advertised
FADT revision was 3.
Implement all fields as defined in version 6 and bump the advertised
FADT revision to 6.
Also set all used access_size fields and x_gpe0_blk to sane values
as Windows 10 verifies those fields starting with FADT revision 5.
Fixes: https://ticket.coreboot.org/issues/109
Tested on Windows 10.
Change-Id: Ic649040025cd09ed3e490a521439ca4e681afbbf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This change disables MrcSafeConfig option during MRC training.
MrcSafeConfig was enabled as part of the early testing.
Now with FSP 2527, there is no need to set this config anymore.
BUG=b:150357377
BRANCH=master
TEST=build and boot ripto/volteer
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I4e4069d83754aaf1e4885d6912ab2a6d506c5269
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40106
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`.read_resources` and `.set_resources` are the only two device
operations that are considered mandatory. Other function pointers
can be left NULL. Having dedicated no-op implementations for the
two mandatory fields should stop the leaking of no-op pointers to
other fields.
Change-Id: I6469a7568dc24317c95e238749d878e798b0a362
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40207
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Providing an explicit no-op function pointer is only necessary for
`.read_resources` and `.set_resources`. All other device-operation
pointers are optional and can be NULL.
Change-Id: I3d139f7be86180558cabec04b8566873062e33be
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Support to configure DDR4 memory variant.
-Add support to read SPD data based on different memory topology.
-Initialize FSP UPD's for DQ and DQS mapping.
BUG=b:151702387
Signed-off-by: Varun Joshi <varun.joshi@intel.corp-partner.google.com>
Change-Id: I47a5dcad3ee316871a6103b9d53ef7f6fc88d7d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39847
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on volteer /
dedede.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:152019429
Change-Id: If940a76d36a7645a7441ba418aa7aec9af9f6319
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I482715c166ccf5d2f3cc25118d25b07dbfd6650a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Move more Kconfig declarations to drivers/intel/fsp2_0/ and document
them properly. This way, we don't have to repeat dependencies and have
the prompts in a common place. We can also easily hide the prompt for
the header path in case the FSP repository is used.
SP platforms were skipped as their Kconfig is too weird but they
shouldn't hold other platforms back.
Change-Id: Iba5af49bcd15427e9eb9b111e6c4cc9bcb7adcae
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This change updates memory configuration on Tiger Lake Platform to
replace "Reserved9" with "DisableDimmCh#" UPD in init_spd_upds().
For reference https://review.coreboot.org/c/coreboot/+/39797 added
"DisableDimmCh#" UPD.
BUG=b:152000235
BRANCH=none
TEST= build volteer and boot to kernel
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie0b5783a8bef02ec8c265fa5b47ce532a77b9675
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40061
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These two identifiers were always very confusing. We're not filling and
injecting generators. We are filling SSDTs and injecting into the DSDT.
So drop the `_generator` suffix. Hopefully, this also makes ACPI look a
little less scary.
Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: David Guckian
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds new memory topologies (SODIMM, MIXED) that are
supported by DDR4 and macros required for DDR4 support.
Memory initialization support for DDR4 will be added in a follow-up
change.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I4b565c3d71bbf437da64ac29597cc19e58f1b98a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
This change reorganizes memory initialization code for LPDDR4x on
TGL to allow sharing of code when adding support for other memory
types. In follow-up changes, support for DDR4 will be added.
1. It adds configuration for memory topology which is currently only
MEMORY_DOWN, however DDR4 requires more topologies to be
supported.
2. spd_info structure is organized to allow mixed topologies as well.
3. DQ/DQS maps are organized to reflect hardware configuration.
TEST=Verified that volteer still boots and memory initialization is
successful.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib625f2ab30a6e1362a310d9abb3f2051f85c3013
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Switch to using Jasper Lake SoC code from soc/intel/jasperlake and stop
referring from soc/intel/tigerlake.
Addtionally mainboard changes are done to support build.
BUG=b:150217037
TEST=Build and boot waddledoo. Build jasperlake_rvp and volteer board.
Change-Id: I39f117bd66cb610a305bcdb8ea65332fd0ff4814
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
For newer Intel graphics(>=11), The DDI port max lanes are set to 4 by
default. And kernel driver no longer relies on coreboot to provide
information via DDI_BUF_CTL_A(for DDI port A) register programming.
Hence removing this code.
BUG=b:150788968
BRANCH=None
TEST=checked jslrvp and tglrvp compilation and boot.
Change-Id: I32692501b60f48a07b8fbb9bb3a755b18f4b3ea9
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39313
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FSP UPD TcssAuxOri is used for setting the IOM_TYPEC_SW_CONFIGURATION_3.
Configure TcssAuxOri to retimer enabled on the port 2 Type-C port.
This setting informs the SoC that a retimer is taking care of SBU
orientation therefore it does not need to do any flipping.
The IOM_TYPEC_SW_CONFIGURATION_3 is a bitfield that controls the aux
orientation settings for the Type-C ports. The TGL EDS describes this
setting and what each bit represents.
Reference section 3.6.5 in TGL EDS #575681
BUG=b:145943811
BRANCH=none
TEST=Boot to OS and check Type-C port1 Display on volteer,
Connecting Type-C display should work regardless of Type-C cable
orientation.
Change-Id: Iae356113cbdc72983f800060b1ebebe3c66b9daf
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39459
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the latest Tigerlake Platform FSP Integration Guide, the
minimum amount of stack needed for FSP-M is 256KiB. Change
DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined
empirically). JSL requires 192KiB.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic9be6446c4db7f62479deab06ebeba2c7326e681
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Enable GPIO functionality in verstage so platforms can read a
PCH GPIO in verstage to determine recovery mode.
BUG=b:151102807
TEST=make build successful
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I4e3b9da307dcf59ab251d8a6a5e09c2a3cfc59fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39501
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC core driver in OS provides debug hooks to developers and end users
to quickly figure out why their platform is not entering a deeper idle
state such as S0ix. This patch adds INT33A1, a required ACPI device,
to support that PMC core driver in tigerlake platform.
BUG=b:146236297
BRANCH=none
TEST="Build and flash volteer and verify it boots to kernel.
Checked for valid files under /sys/kernel/debug/pmc_core."
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib7e583dc2943461a41d2a7ebde1f16a58a118975
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39587
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasper Lake RVP has DDR4 variant which uses SMBus address to read SPD
data. So, add support to read SPD data from SMBUS.
BUG=None
BRANCH=None
TEST=Check compilation for Jasper Lake RVP and check memory training passes.
Change-Id: I94f8707c731c8afa1106e387a246c000bd53a654
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39401
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We were including stddefs.h and stdint.h but compilation fails when we
use 'bool' type in file.
Removing stddef.h and stdint.h and including 'types.h' which includes
all data types
BUG=None
BRANCH=None
TEST=Check if compilation passes when bool is used
Change-Id: I4c9001f729f3103deba9d1fd631a8942c23276ee
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Correct number of gpio pad group for Jasper Lake SoC.
BUG=None
BRANCH=None
Test=Code compilation for Jasper Lake RVP
Change-Id: I381d0e48430e933569a3b22b66b4e6077383e9e2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
FSP needs to know to allow the root ports for USB4/TBT to be enabled
This patch may need additional checks for each board as it might not
be the right thing to turn them all on for every Tiger Lake board.
BUG=b:141609883
BRANCH=NONE
TEST=Built image and verified that the root ports were visible with lspci
Change-Id: I3f020e20fa8e9fd1ac69d883f4dc1fcbb330a3bf
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Method RAOW is assuming that the first argument is a Field object
and writing to it expecting the register to get updated. However,
the callers are passing in the value of the Field object instead.
This eventually is resulting the IMGCLK not getting enable/disabled on the
platform.
Fix this by sending the exact address of the register to be updated.
Also MCCT was setting the clock frequency in both case i.e, Clock Enable
and Disable. Split the MCCT method in two, MCON and MCOF to fix the sequencing
like below
MCON:
Set frequency
Enable clock
MCOF:
Disable clock
Also, make use of MCON and MCOF methods for camera clock control in tglrvp.
This is to avoid the buildbot marking the patch unstable.
BUG=None
BRANCH=None
TEST=Build and Boot waddledoo board and verified that IMGCLKOUT for
world facing camera is enabled/disabled and able to capture images.
Build and Boot Tiger Lake RVP board and verified that IMGCLKOUT for
world facing camera is enabled/disabled and able to capture images.
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I8b886255d5f38819502ae1f4af0851b5a0922b22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39498
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ACPI Object for ISH SSDT
Enable/disable ISH based on devicetree
BRANCH=none
BUG=b:145946347
TEST=boot to OS with TGL RVP UP3
Signed-off-by: Hu, Hebo <hebo.hu@intel.com>
Signed-off-by: li feng <li1.feng@intel.com>
Change-Id: I30f4d936ece139cf67640e6df6a9f47579f87bca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change PMC IPC HID from INT34D2 to INTC1026 along with
new kernel pmc ipc driver.
BUG=b:148949891
BRANCH=none
TEST=Boot on Volteer and validate DP tunneling.
Change-Id: I987e7bf76ad1f8ff534101c80661f7c027a60b51
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Check for dev enabled status for CNVi and update the
UPD accordingly.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add config to override CpuRatio or setting CpuRatio to
allowed maximum processor non-turbo ratio.
BUG=151175469
BRANCH=none
TEST=Build and boot tglrvp and observe there is no extra reset
in meminit.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit 7f9ceef disables TCO SMIs unless specifically enabled, so help
the linker throw out the function that handles them in that case.
Change-Id: Ia3c93b46e979fb8b99282875b188415f249d38dd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
Set value for PcieRpL1Substates according to devicetree.
Chip config parameter PcieRpL1Substates uses (UPD value + 1)
because UPD value of 0 for PcieRpL1Substates means disabled for FSP.
In order to ensure that mainboard setting does not disable L1 substates
incorrectly, chip config parameter values are offset by 1 with 0 meaning
use FSP UPD default.
get_l1_substate_control() ensures that the right UPD value is set in
fsp_params.
Chip config parameter values
0: Use FSP UPD default
1: Disable L1 substates
2: Use L1.1
3: Use L1.2 (FSP UPD default)
BUG=none
BRANCH=none
TEST=Boot up and check FSP log for PCIe config for this values
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I66743a29ad182bd49b501ae73b79270a9eb88450
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39412
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check for dev enabled status for HDA controller and
update the UPD accordingly.
BUG=151174264
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Id5dfff275ed9906852ef7eb7461fbe89a3a115c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39441
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There was a bug like this for skylake that seems to have been copied to
other SoCs.
Signed-off-by: Matt Delco <delco@chromium.org>
Change-Id: Ib4651eda46a064dfb59797ac8e1cb8c38bb8e38c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To use Optane memory, we need to set 2x2 PCIe lane mode while we need
to set 1x4 PCIe lane mode for NVMe. The mode can be selected using
the FIT tool at build time.
By enabling hybrid storage mode in FSP, FSP will set 2x2 PCIe lane mode
if Optane memory is detected and the mode is not 2x2 and set 1x4 PCIe
lane mode if Optane memory is not detected and the mode is not 1x4
during boot up. The mode is saved in SPI NOR for next boot.
BUG=b:148604250
BRANCH=none
TEST=Build and test booting TGLRVP from NVMe and Optane
Check PCIe lane configuration.
Show all the NVMe devices
lspci -d ::0108
Show all the NVMe devices and be really verbose
lspci -vvvd ::0108
Print PCIe lane capabilities and configurations for all the NVMe devices.
lspci -vvvd ::0108 | grep -e x[124]
Print all the PCIe information of the device ae:00.0
lspci -vvvs ae:
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I25bc380697b0774cc30ad1b31ad785ee18822619
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39232
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects pointer dev as FORWARD_NULL. Add sanity check
for dev to prevent NULL pointer dereference if dev did not point
to the audio device.
BUG=CID 1420208
TEST=Built image successfully.
Change-Id: I2a62da44c7044f9dc281eae0949f7f7b612ab238
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable TCO SMIs in common code, if selected by Kconfig. This is needed
for the follow-up commits regarding INTRUDER interrupt.
Tested on X11SSM-F.
Change-Id: If63effe74ac59b5d051a6454bc6375bb89605215
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Coverity detects pointer dev as FORWARD_NULL. Add sanity check
for dev to prevent NULL pointer dereference.
BUG=CID 1353148
TEST=Built and boot up to kernel.
Change-Id: Ic0ad1ec79c950a3c17feccdde4f87f4a107fe8c0
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add gpio definition for Jasper Lake gpio controller.
Also created a separate file for JSL and TGL gpio keeping common asl file.
gpio_soc_defs.h must pass correct information/macro values to asl file
for code to work.
GPIO controller includes 4 gpio community and 10 groups. Patch adds
definition for all gpio within community and groups
Updated IRQ mapping for all gpios
TEST=Check if jslrvp and tglrvp code is compiling
Change-Id: Iae4e694ecb30658e43c5ed99e5436579fd7d2ed2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This change is mainly to control PlatformDebugConsent FSP UPD.
PlatformDebugConsent is enabled if SOC_INTEL_<SOC>LAKE_DEBUG_CONSENT != 0.
PlatformDebugConsent in FspmUpd.h has the details.
TEST=Able to connect ITP/DCI with target system.
Change-Id: I39fe84025cb2bff186d61b2fcad531db52e2b440
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
This patch overrides required FSP-S UPDs to enable 8254 timer
support for TGL if CONFIG_USE_LEGACY_8254_TIMER is selected.
TEST=Required to boot TianoCore payload.
Change-Id: Iaeff5c4b92691ed6ba7b71541ed4f947d5d299a8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
This patch cleans soc/intel/{cnl, icl, tgl} by moving common
soc code into common/block/cse.
Supported SoC can select existing HECI_DISABLE_USING_SMM option to
select common cse code block to make heci function disable using
sideband interface during SMM mode at preboot envionment.
BUG=b:78109109
TEST=Able to make HECI disable in SMM mode successfully without any hang
or errors in CNL, ICL and TGL platform.
Change-Id: I22a4cc05d3967c7653d2abe2c829b4876516d179
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26133
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tigerlake irq.h and pci_irqs.asl have differences compared to
Jasperlake. Hence renaming irq.h as irq_tgl.h and pci_irqs.asl as
pci_irqs_tgl.asl
Also adding a new file irq_jsl.h and pci_irqs_jsl.asl for Jasperlake
SoC and allowing irq.h and pci_irqs.asl to choose the correct file based
on SoC selected.
BUG=None
BRANCH=None
TEST=Compilation for Jasperlake board is working
Change-Id: Ia8e88f92929fe40d7be1c28947e005cb0d862fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Configure UPDs to support Audio enablement.
Correct the upd name in jslrvp devicetree to avoid compilation issue.
BUG=b:147436144
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Idd3927a33d303ed5a663b5b838f43ed4ebc7a0db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Make sure the Skylake comment refers to the correct BWG paragraph and
update the text for all.
BUG=N/A
TEST=build
Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI
offset 0x80. This is specified in PCH BWG par 2.5.1.5.
Add the support to make sure this PCR is always set correctly.
BUG=N/A
TEST=tested on facebook monolith.
Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With CL:1940398, this option is no longer needed. Recovery
requests are not cleared until kernel verification stage is
reached. If the FSP triggers any reboots, recovery requests
will be preserved. In particular:
- Manual requests will be preserved via recovery switch state,
whose behaviour is modified in CB:38779.
- Other recovery requests will remain in nvdata across reboot.
These functions now only work after verstage has run:
int vboot_check_recovery_request(void)
int vboot_recovery_mode_enabled(void)
int vboot_developer_mode_enabled(void)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI files for xhci in JSL is different from TGL. Hence, renaming
xhci.asl to xhci_tgl.asl and adding a new file xhci_jsl.asl for JSL.
Also, allowing xhci.asl to choose the correct file based on the SoC
selected.
BUG=None
BRANCH=None
TEST=Compilation for JasperLake board is working
Change-Id: Ia8e88e02989ff80d7cd1f28941e005cb0d842fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Move some of the common memory code that was being performed in
mainboard into the soc to reduce redundant code going forward.
BUG=b:145642089
BRANCH=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, log into kernel and verify memory size shows 8GB.
Change-Id: I8de502d4f05d52b9dae34e3b013c6d5b1886fa55
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
