After raminit completes, do a read-modify-write test
just below CBMEM top address. If test fails, die().
Change-Id: I33d4153a5ce0908b8889517394afb46f1ca28f92
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Introduce new and required GPIO APIs, using common pinmux
definitions for GPIO configuration.
TEST=build & run
Change-Id: I85ce9007c545b44371c4704a0456774d0eff12a8
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This option has been relocated to depthcharge:
https://crrev.com/c/1524806
BUG=b:124141368, b:124192753
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
CQ-DEPEND=CL:1524806
BRANCH=none
Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In my case, on UPsquared board with Celeron N3350 CPU,
I don't have UART2 but UART0.
Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch cleans up remaining uses of raw boolean Kconfig values I
could find by wrapping them with CONFIG(). The remaining naked config
value warnings in the code should all be false positives now (although
the process was semi-manual and involved some eyeballing so I may have
missed a few).
Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The prev_sleep_state value was showing 5 even after warm reboot, once the
SUS_PWR_FLR bit is being set. This bit was not being cleared.
Hence clearing the PMCON status bits.
BUG=b:128482282
BRANCH=None
TEST=In cbmem logs, check for value of “prev_sleep_state” using command
cbmem –c | grep “prev_sleep_state”
For cold reboot, "prev_sleep_state 5"
For warm reboot, "prev_sleep_state 0"
Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch ensures to make use of common MP Init Kconfig to
choose desire method to peform MP initialization for platform.
Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
mainboard users can select correct MP Init Kconfig in order to
perform MP initialization.
1. Native coreboot MP Init.
2. FSP to do MP Init.
3. FSP to make use of coreboot MP service PPI to perform MP Initialization
Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change enables user to shutdown the system by shortly pressing
power button (<10sec) before OS is loaded. Main use case is shutdown
from recovery/broken screen.
BUG=N/A
TEST=Boot up into recovery screen on Sarien platform, press power button
once, and system should shutdown immediatelly.
Change-Id: I7655daf65ff058df7d9bad4567f74b4f4007acb4
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These signatures need to be consistent across different
architectures.
Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Previously, the size of memory made for vboot_working_data
through the macro VBOOT2_WORK was always specified in each
individual memlayout file. However, there is effectively no
reason to provide this customizability -- the workbuf size
required for verifying firmware has never been more than 12K.
(This could potentially increase in the future if key sizes
or algorithms are changed, but this could be applied globally
rather than for each individual platform.)
This CL binds the VBOOT2_WORK macro to directly use the
VB2_WORKBUF_RECOMMENDED_DATA_SIZE constant as defined by vboot
API. Since the constant needs to be used in a linker script, we
may not include the full vboot API, and must instead directly
include the vb2_constants.h header.
BUG=b:124141368, b:124192753
TEST=Build locally for eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
CQ-DEPEND=CL:1504490
Change-Id: Id71a8ab2401efcc0194d48c8af9017fc90513cb8
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all
DDI ports are enabled and hence configures the HPD and CLK for DDI ports.
This patch initializes only the required UPDs to enable display ports.
BUG=b:123907904
TEST=DP devices working correctly.
Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch removes all local definitions of sub_system functions and make
use of common generic pci_dev_set_subsystem() from PCI bridge and Cardbus
devices as well.
Change-Id: I5fbed39ed448baf11f0e0786ce0ee94741d57237
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch removes local definitions of sub_system function and make use
of common function pci_dev_set_subsystem().
Change-Id: I91982597fdf586ab514bec3d8e4d09f2565fe56d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use the compiler's `-include` switch to include `stdint.h` instead
of adding coreboot's include paths. This avoids leaking other coreboot
header files into lp0.
Change-Id: I321c0a2fc4a2b3941990804db4e1a691e1bed8c6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Commit 74aa99a (src: Drop unused '#include <halt.h>')
accidentally added '#include <halt.h>', however tegra_lp0 directory
is not linked into the rest of coreboot. So we can't use generic halt()
from halt.c file.
Change-Id: I3a67abb77846172597b8ebde779878b9aa2ff8d7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31979
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop 'include <string.h>' when it is not used and
add it when it is missing.
Also extra lines removed, or added just before local includes.
Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Commit 41483c9 (soc/intel/cannonlake: Add required FSP UPD changes for
CML) changed the enum values for PCH_SERIAL_IO_MODE so that 0 is
invalid and valid values start from 1. However, get_param_value was
not updated to correctly subtract 1 before returning any value. This
change adds a macro PCH_SERIAL_IO_INDEX to apply the subtract 1
operation on any value that get_param_value needs to return.
BUG=b:128946016
TEST=Verified that hatch boots successfully.
Change-Id: I4e32fcd1efe4a535251f0ec58662a2dc5f70e8b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
RK3399 SoC code still manually excludes the BL31 region from the memory
map, even though that is now automatically done with the BL31()
memlayout region. CB:31123 and CB:31538 just forgot to remove this line.
The resulting memory map stays the same.
Change-Id: I87458fa09f437b038af10e0fd9d76ef6d9394bc5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ting Shen <phoenixshen@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Default reserved value of used for SCI IRQ.
Configure SCIS field to use IRQ 9.
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I09aca433528b6f64ad3ff3753ae8392c0d89cdc0
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Adding the basic infrastruture soc support for qcs405 and
a new build variant.
TEST=build
Change-Id: Ia379cf375e4459ed55cc36cb8a0a92cab18b705e
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mmio resouces IOAPIC and ROM area not reserved.
Reserve IOAPIC and ROM resources.
BUG=N/A
TEST=Intel CherryHill CRB booting Embedded Linux
Change-Id: I917c30892b46ac1d964e7bab339082d17a1e706d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
coreboot have an option to use legacy UART or LPSS UART. FSP will use the
UART initialized by coreboot and we can choose an option to skip Uart
initialization by FSP.
For this, we need to pass correct debug interface flag to FSP through
which FSP will know which UART port to use. If we don't pass correct
interface information, FSP may try to dump logs on that port and it may
slow down the system.
BUG=none
BRANCH=none
TEST=Compile and boot with coreboot. Check FSP and coreboot logs are
coming on serial port.
Change-Id: I1ebb20c93e2c15ec085538509099de72bc9dd62c
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update the Kconfig option for disabling ESPI SMI source
to disable it entirely, not just when ACPI mode is disabled.
For the situations where this is needed (just the sarien
board) it is better to completely stop the EC from sending
any SMI events as no actions are taken.
Change-Id: Id94481bb2f0cfc948f350be45d360bfe40ddf018
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Initialize the clock of the Gigabit Ethernet Controller.
Change-Id: I172dc518c9b48c122289bba5a65beece925410d4
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Fix a spelling error in the name.
TEST=Build google/aleena and compare amdfw.rom before/after
Change-Id: I727ba1d6a8991caa1cdddcfca94c55c73954320a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds required FSP UPD changes for CometLake SoC.
Also this patch tries to create common parse logic for CometLake as
well as cannonlake SOC.
We parse device tree parameters for PCI devices and fill values in FSP
UPDs. We fill UPDs based on pci device config as well as SerialIoDev
config of devicetree.
For PCI devices, if PCI device is disabled from devicetree, we'll assign
disable value to FSP UPD.
In case devicetree doesn't fill this parameter or value is invalid in
SerialIoDev config, default mode will be set to PCI.
In case of valid value, we'll fill the same value into FSP UPD.
BUG=none
BRANCH=none
TEST=check if CML board boots and proper UPD values are filled.
Change-Id: Ib92b660409ab01d70358042b2ed29b8bf9cab26d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Move ChipsetFspReturnPoint() to drivers/intel/fsp1_0.
Allows to have a common entry after FSP-M.
Change-Id: I064ae67041c521ee92877cff30c814fce7b08e1f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
CNL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
BUG=b:128482282
TEST=Verified that prev_sleep_state is reported correctly when booting
from S5.
Change-Id: I75780a004ded8f282ffb3feb0cdc76233ebfd4f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31908
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on hatch.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:127609572
Change-Id: I9b2d4c33fc378b9a24b111971ec2bfdb5f8d57d0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31850
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the
initialization of the programmable interrupt controller (PIC) for
faultless operation. The PIC mode is need for USB support (e.g.
keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM).
Therefore add setup_lapic() to configure the APIC.
Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds support for logging wake source information in gsmi
callbacks. With this change, all the elog logging infrastructure can
be used for S0ix as well as S3 on cannonlake.
BUG=b:124131938
BRANCH=none
TEST=Verified that the wake events are logged during the S0ix resume:
6 | 2019-03-04 17:03:13 | S0ix Enter
7 | 2019-03-04 17:03:17 | S0ix Exit
8 | 2019-03-04 17:03:17 | Wake Source | RTC Alarm | 0
9 | 2019-03-04 17:03:55 | S0ix Enter
10 | 2019-03-04 17:03:56 | S0ix Exit
11 | 2019-03-04 17:03:56 | Wake Source | GPE # | 21
12 | 2019-03-04 17:04:36 | S0ix Enter
13 | 2019-03-04 17:04:45 | S0ix Exit
14 | 2019-03-04 17:04:45 | Wake Source | GPE # | 112
15 | 2019-03-04 17:05:01 | S0ix Enter
16 | 2019-03-04 17:05:09 | S0ix Exit
17 | 2019-03-04 17:05:09 | Wake Source | Power Button | 0
Change-Id: Id627843e22c2524dfa94395b780cf2134f386137
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
BUG=b:124131938
BRANCH=none
TEST=none
Change-Id: If24c3feeb77f4fb692ef0bf38d537b2b54de3c36
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
CPU PM TIMER EMULATION logic will help UEFI payload to execute rather
wait for time tick in absence of TCO and ACPI PM timer after FSP-S.
BUG=N/A
TEST=Able to build and boot with tianocore payload.
Change-Id: I7fd11e728b7a14f41f08bc39bcd92a42a8aa6cff
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Change the amdfwtool command line arguments to use the new --subprogram
option.
TEST=Verify amdfw.rom is unchanged before and after the conversion
BUG=b:126691068
Change-Id: Iaae4094251974b8dad48b8d2c37bb2e43a412237
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31736
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To prepare for consolidating amdfwtool command-line options, change
the stoneyridge makefile to use the ones that will be kept. By using
the new --combo-capable option, the PSP directory's pointer still
appears in the correct location within the the Embedded Firmware
structure.
TEST=Confirm amdfw.rom file is unchanged before/after when building
google/grunt
BUG=b:126691068
Change-Id: Ia31ebdcb8c392d75c56811b60f1ae673f7ba79cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31730
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Until now the TCPA log wasn't working correctly.
* Refactor TCPA log code.
* Add TCPA log dump fucntion.
* Make TCPA log available in bootblock.
* Fix TCPA log formatting.
* Add x86 and Cavium memory for early log.
Change-Id: Ic93133531b84318f48940d34bded48cbae739c44
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This patch adds support H110 chipset (Sunrise Point) for Skylake and
Kaby Lake processor families by adding the corresponding IDs. It has
been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU).
Change-Id: I85ba65ac860687b0f9fd781938e5cac21a1b668d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31602
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support
1) Intel(R) Xeon(R) E3 - 1200/1500 v5/6th Gen Intel(R) Core(TM) Host
Bridge/DRAM Registers - 191F;
2) HD Graphics 530 Skylake GT2 - Intel integrated graphics processor
https://en.wikichip.org/wiki/intel/hd_graphics/530.
This is required to run coreboot on the Intel Core i5-6600 (Skylake)
desktop processor. It has been tested on ASRock H110M-DVS motherboard.
Change-Id: If47e9ac32813a9f73d3a23f44536f60d1003971d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31601
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel Braswell P-UNIT is missing in pci_devs.h
Add PUNIT device, function and device ID
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I80c87c8964b3ba830571e0c03c424b67729a0c1a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31711
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This IS_ENABLED(XXX) line should've clearly been IS_ENABLED(CONFIG_XXX).
This patch can fix that. However, I don't have (and don't plan to
acquire) an affected system to test, so approve at your own risk (or
let me know if I should just remove that check instead).
Change-Id: I79a0fca65853798ee45c3779b437864ba3cf2b1e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Intel Braswell SoC contains SMBus controller but no support
is available for this controller.
This controller is compatible with the Intel SMBus support in the
southbridge common directory.
To be able using smbus support from the Intel common directory
the smbus.c is moved outside SOUTHBRIDGE_INTEL_COMMON
dependency block.
Use SOUTHBRIDGE_INTEL_COMMON_SMBUS to include support.
BUG=N/A
TEST= Facebook FBG-1710 LCD panel
Change-Id: Ie3d4f657558a1aed21b083ef5cad08ea96e629c3
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes indirect includes that would break with followup work.
Change-Id: I37ca01b904a0b422a4d09475377e755e167a6ab3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
These resolved to <device/oprom/include/io.h> which
included <arch/io.h> that we really wanted.
Change-Id: I9aa0bdf34cd1d53e20b4494c7986f0878f4fd840
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31693
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move common definitions for PCH H and LP to a common header.
Change-Id: If47692ecb05134db1ee6c0fb10125d6a1b67f127
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31621
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the ISH ACPI device so we can hang fields off of a _DSD table.
Since this is also a PCI device that has run time probing, we can always
emit the ACPI device and let the device tree turn the device on or off.
BRANCH=none
BUG=b:122722008
TEST=verify that _DSD table gets publish under ISH device in kernel ACPI
tables. Also verified that device is still turned off if device tree for
ISH is off.
Change-Id: Ic0231f1ac637fea0e251eb3ac84f0fd8d64c12b2
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31681
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The following remarks show up during cannonlake based platform coreboot
build:
dsdt.asl 55: Offset (0x00),
Remark 2158 - ^ Unnecessary/redundant use of Offset operator
dsdt.asl 136: Offset (0xa8),
Remark 2158 - ^ Unnecessary/redundant use of Offset operator
Address those two remarks in coreboot.
BUG=N/A
TEST=Build coreboot and check build log to see no more remark.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Iad660347b32d90ac1176654820375e30a21b5ffe
Reviewed-on: https://review.coreboot.org/c/31666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Local APIC was not configured.
Add setup_lapic() to configure the APIC.
BUG=N/A
TEST= Ubuntu 4.15.0 reports correct local APIC information
on Intel CherryHill CRB
Change-Id: Ic1da5b1bf235f34b957142e86c70a9dbfa3ded1d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
HDA support did not configure the codecs correclty.
Use Intel common block support to configure the codecs.
To use common Intel HDA support file hda.c file has been
removed and Braswell HDA device ID is added to list of
supported PCI devices in intel/common/block/hda/hda.c.
CONFIG_SOC_INTEL_COMMON_BLOCK and
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA are enabled
to include hda.c in build.
When codec table is available at board level
SOC_INTEL_COMMON_BLOCK_HDA_VERB must be enabled
and a codec table must be supplied.
BUG=N/A
TEST=Facebook FBG-1701 ALC298 configuration
Change-Id: I5c23ec311e5b5a6dfd6f031aa19617407fe8ed63
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Since ACPI v2.c, this field is access_size.
Currently, coreboot is using ACPI v3,so we can drop '.resv' field.
Change-Id: I7b3b930861669bb05cdc8e81f6502476a0568fe0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We had two ways to configure the serial IRQ mode. One time in the
devicetree for FSP and one time through Kconfig for coreboot. We'll
use `enum serirq_mode` from soc/intel/common/ as a devicetree option
instead. As the default is `quiet mode` here and that is the most
common mode, this saves us a lot of lines.
In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting
settings in devicetree and Kconfig. We'll maintain the `continuous`
selection, although it might be that coreboot overrode this earlier
on the kblrvps.
Note: A lot of Google boards have serial IRQ enabled, while the pin
seems to be unconnected?
Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
INT_MODEL defined in ACPI 1.0 and renamed to reserved since V 2.0.
The value for this field is zero but 1 is allowed to maintain
compatibility with ACPI 1.0.
So set this value to zero as we are using greater version than ACPI 1.0.
Change-Id: I910ead4e5618c958a7989f4c309a3a4bb938e31a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29986
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Calculation of memory reserved by FSP is incorrect.
Use CBMEM_ID_FSP_RESERVED_MEMORY to determine the memory area
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: If68bda39ba2b1f3be4ed4bc872710be7bbd4948b
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
The level/edge mode of PIRQ is not configured and i8259 PIC not initialized.
Add calls to:
- i8259_configure_irq_trigger()
- setup_i8259()
- write_pci_config_irqs()
to correct the configuration of interrupts.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: I128cb35dd0e348a9cd9fb162651e0aa2b7e4a3ef
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
IRQ10 and 11 are not available as _PRS in all LNKx ResourceTemplates.
These interrupt numbers are added to all LNKx.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ie7a263d7d50f7f85e6195777c1429dcc27a15604
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29287
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change ac8c60e (soc/intel/cannonlake: Disable ACPI mode as part of
pmc_soc_init) moved disabling of ACPI mode to pmc_soc_init to keep it
more aligned with the behavior on other Intel SoCs. However, as the
PMC device is hidden, it never gets enumerated and so init function
does not get called for it. This change moves the call to disable ACPI
mode to exit of BS_DEV_INIT instead.
BUG=b:126016602
TEST=Verified that:
1. pmc_set_acpi_mode is actually getting called.
2. EC panic event gets logged to eventlog correctly.
Change-Id: Ie7025e322fa0abc21367a520184a4c7741eba1e6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31633
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch implements RTC initialization.
1. initialization dcxo
2. rtc clock using dcxo 32k
3. export RTC_32K1V8_0 to SOC, export RTC_32K1V8_1 to WLAN
4. rtc register initialization
5. refactor the driver common part
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Icccb9360a507fcbfd865b107cd3630e71c810d55
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fix cases of using ENV_SMM where __SIMPLE_DEVICE__
should be used instead.
Change-Id: I385c82767a87ff7a47466a200488fae9fc8b863d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
For fast CBMEM console use minimum BIOS_DEBUG level.
For other consoles, Kconfig and/or nvram settings
apply.
Change-Id: Iff56a0a3182f258200cac80e013957d598cc2130
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
SD controller in CNL-PCH provides a ability to configure the behavior of
SD_VDD1_PWR_EN# as an active high or low signal. FSP provides an UPD
"SdCardPowerEnableActiveHigh" to control the same.
However, for platforms using SD_VDD1_PWR_EN# as active high, the SDXC
card connector is always powered and may impact system power. This is because
SD_VDD1_PWR_EN# does not de-assert during SDXC D3 or when SD card is not
inserted.
Workaround is to change the pad ownership of SD_VDD1_PWR_EN to GPIO and
force the TX buffer to low in _PS3. And restore the pad mode to native
function in _PS0.
Hence add a Kconfig option to update the UPD, which the board can select
based on how the SD_VDD1_PWR_EN is implemented on it. And, the workaround
gets applied based on this config.
BUG=b:123350329
Change-Id: Iee262d7ecdf8c31362aec3d95dd9b3e8359e0c25
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31445
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support measured boot, drop VBOOT_RETURN_FROM_VERSTAGE.
The SoC has enough CAR space to support a separate verstage.
Tested on OpenCellular Elgon.
Change-Id: I18022000f6f05df89d3037896ef627070bfcca06
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31568
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC initialization on Cannon Lake happens earlier in the boot sequence
than other SoCs because FSP-Silicon init hides PMC from PCI bus. As
ACPI disabling was done as part of PMC init, it was being called
earlier than what other SoCs do. This resulted in a different order of
events for some drivers e.g. ChromeOS EC. In case of ChromeOS EC, it
ended up clearing EC events (which happens as part of ACPI disabling
in SMM) before logging any events of interest that happen during
mainboard initialization.
This change moves the call to disable ACPI to pmc_soc_init just like
other SoCs to keep the order of events more aligned.
BUG=b:126016602
TEST=Verified that EC panic event gets logged to eventlog correctly.
Change-Id: Ib73883424a8dfd315893ca712ca86c7c08cee551
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are functions defined on headers with no code written for. They
probably existed earlier, were removed and forgot in the headers. Remove
functions from headers if there's no actual code written for.
BUG=b:123564495
TEST=Build grunt.
Change-Id: Ia6a12e22a0944351c455dc2c3b534f09a258bd7b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The Cavium DRAM init might use the RNG for pattern generation.
Initialize it before running DRAM init.
Tested on OpenCellular Elgon.
The RNG generates non identical numbers.
Change-Id: I886f920e9941793fb76b56cc5a24a42e23b082e0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
* Introduce a measured boot mode into vboot.
* Add hook for stage measurements in prog_loader and cbfs.
* Implement and hook-up CRTM in vboot and check for suspend.
Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move ecam0_get_bar_val into the common folder and make it public.
Compile it for romstage and ramstage.
To be used by romstage PCI code.
Tested on OpenCellular Elgon.
Change-Id: I18b1ede56795bf8c1f9476592291b8ea610eccd4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Third parameter ConfigPtr of the callout is of type
AP_EXE_PARAMS and needs to be passed back to AGESA
with AmdLateRunApTask() call.
Change-Id: I1dad64b955b53bd19363737665235f95aa3d451e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/27277
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add UART PCI driver in cavium/common/pci.
Tested on opencellular/elgon.
The UART is still initialized and usable in Linux.
Change-Id: I0fa2f086aba9b4f9c6dba7a35a84ea61c5fa64e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add a function in gpio ASL library to set pad mode.
BUG=b:123350329
Change-Id: I6c683f27ddffc3132001706d1694c71bb5664577
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When <symbols.h> was first introduced, it only declared a handful of
regions and we didn't expect that too many architectures and platforms
would need to add their own later. However, our amount of platforms has
greatly expanded since, and with them the need for more special memory
regions. The amount of code duplication is starting to get unsightly,
and platforms keep defining their own <soc/symbols.h> files that need
this as well.
This patch adds another macro to cut down the definition boilerplate.
Unfortunately, macros cannot define other macros when they're called, so
referring to region sizes as _name_size doesn't work anymore. This patch
replaces the scheme with REGION_SIZE(name).
Not touching the regions in the x86-specific <arch/symbols.h> yet since
they don't follow the standard _region/_eregion naming scheme. They can
be converted later if desired.
Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The BL31 on RK3399 is split into multiple segments... the majority goes
into DRAM, but small parts must be put into SRAM and PMUSRAM. With
CB:31123 only the DRAM part was added to memlayout, so the SRAM parts
will not be correctly marked in bootmem and BL31 loading fails the
selfload check. This patch adds the remaining regions to fix the
problem.
Change-Id: Ia0597216c08512c47361a1dc0beb34d022a8994f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ting Shen <phoenixshen@google.com>
The setting of these registers are only for i2c pin.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on Kukui
Change-Id: I518ca07645fe55aa55e94e4f98178baa0b74a882
Signed-off-by: jg_poxu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/30974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
For CFL and WHL, Microcode is being loaded from FIT. Both
supports the PRMRR/SGX feature. If This is supported the FIT
microcode load will set the msr (0x08b) with the Patch id one
less than the id in the microcode binary. This results in
Microcode getting reloaded again in bootblock and ramstage.
Avoid the microcode reload by checking for PRMRR support.
CFL and WHL CPU die are based on KBL CPU so we need to have
this check, where CNL CPU die is not based on KBL CPU so
skip this check for CNL.
BUG=b:124126405
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I3311a7413d27044f9c819179e5b0cb9a67b46955
Reviewed-on: https://review.coreboot.org/c/31492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Variants of Hatch need to accommodate single channel DDR. Also,
removing const modifier as we'll need to set these fields
incrementally now. For the single channel configuration, we set
MemorySpdPtr10 to 0. For the dual channel configuration, we set
MemorySpdPtr10 to MemorySpdPtr00.
BUG=b:123062346, b:122959294
BRANCH=None
TEST=Boot into current boards and ensure that we have 2 channels as expected
Change-Id: Ice22b103664187834e255d1359bfd9b51993b5b6
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31262
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch feeds PsysPmax setting to FSP through UPD and adds a
psys_pmax member in chip information so that we can set PsysPmax
through DT. The PsysPmax needs to be set correctly mapping to maximum
system power. Otherwise, system performance would be limited due to
the default PsysPmax setting in FSP is only 21W.
BUG=None
BRANCH=None
TEST=Set psys_pmax to an example value eg 101 in DT && put debug code
in FSP to print the PsysPmax value before sending to Pcode, ensure
the setting is correctly programmed.
Change-Id: Ia88ea17bc661a388c5b9bc3e59abc27c9f262977
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/31505
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the _DSM method 5 and 6 for entering and exiting S0ix.
The _DSM method gets injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ia908969decf7cf12f505becb4f4a4a9caa7ed6db
Reviewed-on: https://review.coreboot.org/c/31101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
New whiskeylake v-0 stepping have changed the graphics device id from
0x3EA0 to 0x3EA1 for celeron, so declare that in common code. Also the
CPUID was changed from 806EB to 806EC, include that as well.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ief5213a96507124b90f8dd2eeea2f6bf43843dc6
Reviewed-on: https://review.coreboot.org/c/31433
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"mosys memory spd print all" returns incorrect memory ranks info.
This patch and 2 upcomming ones (one in FSP) will address the issue.
BUG=b:122329046
TEST=Boot to OS on Bobba variant of Octopus
BRANCH=octopus
Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/31235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use the common VMX implementation, and set IA32_FEATURE_CONTROL
lock bit per Kconfig *after* SGX is configured (as SGX also sets
bits on the IA32_FEATURE_CONTROL register).
As it is now correctly based on a Kconfig, the `VmxEnable` devicetree
setting vanishes.
Test: build/boot google/[chell,fizz], observe Virtualization enabled
under Windows 10 when VMX enabled and lock bit set.
Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29682
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The moved functions are only about locating and loading
the refcode blobs. Separate them from the actual calls
into the blob. Eventually previous binaryPI blobs should
be unified to share same loader code.
Change-Id: I68885e7f855b195c178e746c8f3f0f49166d0def
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
There are typically two configurable oscillator outputs available on APUs
or FCHs. Convert the enable function to work with either one.
BUG=b:none.
TEST=Build and boot grunt.
Change-Id: I4b89b1e3b7963472471e34897bdd00176dbdb914
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Replace all instances, where 0 is used by the macro/define
`ACPI_FADT_LEGACY_FREE`.
Change-Id: I226b334620e0cdafc7639c7a76ea3a523ae53a74
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/31289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
According to doc 609208, bit 25 TOL_1V8 in GPP_F4 ~ GPP_F11 DW1
should be clear to prevent unexpected I2C behaviors.
BUG=b:124269499
TEST=boot on nami and check bit 25 TOL_1V8 is clear
Change-Id: I419ef3e89104ad3611e96bbe23a582504b45be0c
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/31368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Define VR settings configuration as per board design.
BUG=N/A
TEST=Build and boot up into sarien platform.
Change-Id: Ic9927943b1f8fab687659fd1d6da0e3988a3aba2
Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com>
Reviewed-on: https://review.coreboot.org/c/31405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Set SerialIoDebugUartNumber to CONFIG_UART_FOR_CONSOLE
SerialIoDebugUartNumber UPD use to select UART Number for Debug Purpose
The default value of SerialIoDebugUartNumber is 2 by default it selects UART 2
so it needs to be initialized as per board config
BUG=b:123702398
Change-Id: I91df4bb756e8ea86db112f1cc28687f48b2c0525
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31375
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I731bc1c9dec6cb5bbb228b7949a73848cb73eee3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30511
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: Idca207b4f05d1844ce6612dbecaad6faeb68725a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I72effa93e36156ad35b3e45db449d8d0d0cabf06
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
* Adding separate targets for 32bit and 64bit qemu
* Using the riscv64 toolchain for 32bit builds requires setting -m elf32lriscv
* rv32/rv64 is currently configured with ARCH_RISCV_RV32/RV64 and not per stage.
This should probably be changed later.
TEST=Boots to "Payload not loaded." on 32bit qemu using the following commands:
util/riscv/make-spike-elf.sh build/coreboot.rom build/coreboot.elf
qemu-system-riscv32 -M virt -m 1024M -nographic -kernel build/coreboot.elf
Change-Id: I35e59b459d1770df10b51fe9e77dcc474d7c75a0
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/c/31253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Some similar calls to postcar_frame_add_mtrr() were added in the
meantime or were under review while postcar_frame_add_romcache()
was introduced.
Change-Id: Ia8771dc007c02328bd4784e6b50cada94abba198
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Possible allowance to do wakeup is already evaluated
early in romstage, so these tests are redundant.
Change-Id: I7c7a9ecbfcb82790e477d906a00f9749103b4045
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/27276
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This board is EOL and has FSP2.0 support, so drop the older
version.
Change-Id: If5297e87c7a7422e1a129a2d8687fc86a5015a77
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The CAR setup is almost identical to the cpu/intel/non-evict
CAR setup, with the only difference that L2 cache needs to be
separately enabled. Currently this assumes that it is possible
to use a static Kconfig option to cover all CPU's requiring this.
Change-Id: Iae9b584bc0d32a56be2e6e2b2e893897eb448aa5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It is not mentioned in the FSP spec and doesn't seem to be implemented
for any other FSP than the Broadwell-DE one.
Change-Id: I87c758204f1aabf13f47de19fd87c6e1ed67258e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
FSP-S is currently configuring GPIOs that it should not. This results
in issues where mainboard devices don't behave as expected e.g. host
unable to receive TPM interrupts as the pad for the interrupt is
re-configured as something else.
Until FSP-S is fixed, this change adds a workaround by reconfiguring
GPIOs after FSP-S is run.
All mainboards need to call cnl_configure_pads instead of
gpio_configure_pads so that SoC code can maintain a reference to the
GPIO table and use that to re-configure GPIOs after FSP-S is run.
BUG=b:123721147
BRANCH=None
TEST=Verified that there are no TPM IRQ timeouts in boot log on hatch.
Change-Id: I7787aa8f185f633627bcedc7f23504bf4a5250b4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch performs below tasks
1. Create SOC_INTEL_COMMON_CANNONLAKE_BASE kconfig.
2. Allow required SoC to select this kconfig to extend CANNONLAKE
SoC support and add incremental changes.
3. Select correct SoC support for hatch, sarien, cflrvps
and whlrvp.
* Hatch is WHL SoC based board
* Sarien is WHL SoC based board
* CFLRVP U/8/11 are CFL SoC based board
* WHLRVP is based on WHL SoC
4. Add correct FSP blobs path for WHL SoC based designs.
Change-Id: I66b63361841f5a16615ddce4225c4f6182eabdb3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
After CL:31122, we can finally define a memory type specific for BL31,
to make sure BL31 is not loaded on other reserved area.
Change-Id: Idbd9a7fe4b12af23de1519892936d8d88a000e2c
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://review.coreboot.org/c/31123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The allocation is not required before romstage,
so it can be just another CAR_GLOBAL instead of
polluting the linker script.
Change-Id: I0738a655f6cc924fbed92ea630f85406e3f58c0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31191
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default state of the HOSTSW_OWN register in the PCH is zero, which
configures GPIO pins for ACPI ownership. The board variabt GPIO tables
can request specific pins to be configured for GPIO driver ownership.
This change sets the HOSTSW_OWN ownership bit when requested and
explicitly clears the ownership bit if not requested.
BUG=b:120884290
BRANCH=none
TEST=Build coreboot on sarien. Verified UEFI to coreboot transition
boots successfully.
Change-Id: Ia82539dbbbc7cf5dfb9223902d563cafec1a73e5
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
By APL BIOS Spec, we must not do this on warm boots.
The TODO comment seems stale and copied over. So the actual
requirements for SGX are unknown and we add a guard for that
case.
Change-Id: I09b4a2fe22267d7318951aac20a3ea566403492e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31200
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The FSP has a parameter to enable or disable the VTD feature
(Intel's Virtualization Technology for Directed I/O). In current header
files for FSP-S (Apollo Lake and Gemini Lake) this parameter is set to
disabled per default. Therefore, if the FSP was not modified via BCT,
this feature is most likely disabled on all mainboards.
Add a chip parameter so that VTD can be enabled on mainboard level in
devicetree and therefore this feature can be activated if needed.
Change-Id: Ic0bfcf1719e1ccc678a932bf3d38c6dbce3556bc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31194
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GLK has a dedicated USB2 port that is used specifically for CNVi
BT. This requires that the ACPI tables define an additional USB 2 port
which results in _ADR for USB 3 ports being different for GLK than
APL.
This change splits the ports in xhci.asl into APL and GLK specific
ports.asl and selects the appropriate file based on
CONFIG_SOC_INTEL_GLK. It also adds support for returning HS09 for GLK
if ACPI name is requested for that port.
BUG=b:123670712
BRANCH=octopus
TEST=Verified that generated DSDT for octopus (GLK) includes HS09 and
for reef (APL) does not include HS09 definition.
Change-Id: I2d3d3690ec9ea1f6e35c38c3b3cbb82e961b7950
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31172
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AGESA doesn't detect invalid NV data during AmdInitResume(). In
cases where the data has been erased, or cannot be found, reboot
the system. Otherwise the user will experience a hang when cbmem
isn't recovered and the postcar frame cannot be initialized.
BUG=b:122725586
TEST=Write S3 NV save data with 0xff and force reboot
Change-Id: Ib3cf2515f300decd3de198f7741660d95ee4c744
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch removes duplicate selects of same SOC_INTEL_CANNONLAKE_MEMCFG_INIT
from various CFL/WHL SoC based boards to include cnl_memcfg_init.c file
and include the cnl_memcfg_init.c file by default in CNL SoC Makefile.inc.
Change-Id: Ib21ea305871dc859e7db0720c18a9479100346c3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Convert vboot_platform_prepare_reboot() to call a function in
soc//stoneyridge. A subsequent patch will add another call to
the new function, and this change removes any inference of a
dependency on vboot.
BUG=b:122725586
Change-Id: I634fcd030e206c790bda697a3dbef4e8cc21b3a8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
XHCI is currently named as XHC1. This leads to namespace lookup error in
the kernel when children USB ACPI devices are added under the scope of
XHCI device.
BUG=b:123296264
BRANCH=octopus
TEST=Boot to ChromeOS; Ensure that the below error is resolved in the
kernel dmesg
[ 0.001000] ACPI Error: [\_SB_.PCI0.XHCI.RHUB.HS03] Namespace lookup
failure, AE_NOT_FOUND (20170728/dswload-210)
Change-Id: Ia4921547fee6fb51333319b9e881501a7e75ebce
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/31147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Currently SMBUS registers are accessed through IO, but with stoneyridge
they can be accessed through MMIO. This reduces the time of execution by
a tiny amount (MMIO write is faster than IO write, though MMIO read is about
as fast as IO read) as most of the time consumed is actually transaction
time. Convert code to MMIO access.
BUG=b:117754784
TEST=Used IO to write and MMIO to read, to confirm a one to one relationship
between IO and MMIO. Then build and boot grunt.
Change-Id: Ibe1471d1d578611e7d666f70bc97de4c3b74d7f8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/29258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
MT8183 only allows booting from eMMC, so we have to do eMMC emulation
from an external source, for example EC, which makes the size of
bootblock very important.
This CL moves some initialization steps from bootblock to verstage. This
will save us about 2700 bytes (before compression) / 1024 bytes (after
LZ4 compression) in bootblock. In case of CONFIG_VBOOT is disabled,
these initialization steps will be done in romstage.
BRANCH=none
BUG=b:120588396
TEST=manually boot into kernel
Change-Id: I9968d88c54283ef334d1ab975086d4adb3363bd6
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/30331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now we have usb2eye configuration register in FSPUPD, so we need
to add an interface to override usb2eye setting.
BRANCH=octopus
BUG=NONE
TEST=Verified usb2eye custom setting works
Change-Id: I5c500964658072eaaf59364242aa928df25d99d1
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/31060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Separate WDT reset function from WDT driver, then we can use the common
WDT driver and have a board-specific reset function on different boards.
In Kukui, we plan to use GPIO HW reset, instead of WDT reset. Add config
"MISSING_BOARD_RESET" in Kukui to pass the build for now.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot; emerge-kukui coreboot;
Change-Id: Ica07fe3a027cd7e9eb6d10202c3ef3ed7bea00c2
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31121
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch removes stale ASL entries added in past due to chromeos
requirement.
BUG=115755982
TEST=Build and boot ICL platform without any problem.
Change-Id: I18b57822ce3198fb96aae977f0b552ff2d4a14ee
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31117
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SoC has an Image Processing Unit which is located on PCI 00:03.0.
There is a corresponding parameter for FSP which handles
enabling/disabling of this functionality (IpuEn). Add this device to
the disable_dev() function of the chip so that if this device is
disabled in devicetree the matching FSP parameter will be disabled as
well. As this parameter is only valid for Apollo Lake, use the config
switch CONFIG_SOC_INTEL_GLK to disable this code if compiled not for
Apollo Lake. As this issue is regarding a missing structure member,
this check needs to be done on preprocessor level and not at runtime.
Test=Verified this function on mc_apl2.
Change-Id: I75444bf483de32ba641f76ca50e9744fdce2e726
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If the VTd feature is enabled, there will be up to two fixed resources
which are set up by the FSP. Add these resources to the list of system
resources so that the PCI enumerator will know them.
Change-Id: If96fc1c93746e3c7f510e5b3095ea3090e1b8807
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30991
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Generate DMAR table if VTd feature is enabled.
Test=Booted into Linux on mc_apl2 and verified the DMAR table contents.
In addition turned off Vtd and verified that no DMAR table is generated
at all.
Change-Id: Ie3683a2f3578c141c691b2268e32f27ba2e772fa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
In preparation of generating DMAR tables, provide the hook in SoC scope
for the systemagent to write ACPI tables. The complete functionality is
SoC-specific. Therefore the entry hook is defined as a weak function which
can be overridden by SoC code. If the SoC does not have support for
generating DMAR tables this hook will do no harm.
Change-Id: I1333ae2b79f1a855e6f3bb39bf534da170ddc9e1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is spotted using ./util/lint/kconfig_lint
To work around the issue, rename the prefix from `CONFIG_` to `CONF_`.
Change-Id: Ia31aed366bf768ab167ed5f8595bee8234aac46b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Select FSP_M_XIP if MAINBOARD_USES_FSP2_0, since all SkyKabylake
boards require FSP-M XIP when FSP 2.0 is used, and since not
having it selected results in a non-booting image.
Also, put select FSP_T_XIP if FSP_CAR in proper alphabetical order.
Change-Id: I6d3986eda18297b12490cefb236f5de5faca6550
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
MASK_STATUS disables interrupt status generation for the entire GPIO
controller when any debounce register is configured. This causes
problems when the kernel is loading drivers because we could lose
interrupts for previously loaded devices.
sb_program_gpios is also not setup to wait when configuring
PAD_DEBOUNCE, so there is a potential that we could lose the interrupt
status enable bit for other registers. By disabling MASK_STATUS we avoid
that problem.
BUG=b:113880780
BRANCH=none
TEST=Ran a reboot stress test that concluded that we are no longer
losing TPM interrupts while booting.
Change-Id: Ife1db3b1449f205092509595cbc3eca511bff57a
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Also make soc_get_tss_table public and weak instead of static
in intelblock so it can be overridden in denverton.
Change-Id: Id9c7da474a81417a5cebd875023f7cd3d5a77796
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/25430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Intel RTC common code driver need to turn on RTC itself.After the
change, cannonlake and icelake platform will have RTC enabled.
BUG=b:123372643
TEST=build and boot up on sarien platform, check .config to see
CONFIG_RTC is set.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I0c8c5cf9e6f7f338b1f2f784c04254649d257536
Reviewed-on: https://review.coreboot.org/c/31112
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit dc666f5 (soc/intel/cannonlake: Change in SaGv options) added a
conditional preprocessor directive, but its condition was incorrect
because SOC_INTEL_CANNONLAKE is selected for CNL, CFL and WHL. Thus, an
explicit check for !SOC_INTEL_COFFEELAKE is required.
While we are at it, clean up the comment above a bit.
BUG=b:123184474
Change-Id: I8a6959bb615fb5668cbfe54339747d135bd5a005
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31095
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is spotted using "./util/lint/kconfig_lint"
While at it, do the check in C and not the preprocessor.
Change-Id: Icfda267936a23d9d14832116d67571f42f685906
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
- Port the existing denverton tables to intelblock
- Add C-States table for denverton
Note: Removed code is functionally identical to corresponding
common code.
Tested-on: scaleway/tagada
Change-Id: Iee061a258a7b1cbf0a69bcfbf36ec2c623e84399
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/25428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Export the SOC level function to set the After G3 state so it
can be changed by the mainboard. The setting will be restored
by a normal boot but in some circumstances coreboot wants to
ensure that it will be powered up again after a reset.
BUG=b:121380403
TEST=update cr50 firmware on sarien and reboot and ensure the
host does not power off after the cr50 initiated reset.
Change-Id: I6cd572ac91229584b9907f87bb4b340963203c32
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31056
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disabling CpuRatio UPD for FSP will ensure it does not force a
hard reset to set the CPU Flex Ratio at boot. This is important
in a recovery mode boot where the SOC will lose power and need
to set the flex ratio again.
Disabling SaGv makes recovery mode training faster and mirrors
the setting that was done on Skylake.
BUG=b:123305400
TEST=reliably enter recovery mode on sarien
Change-Id: Ie9664493a980af9acce82faff81f4c4b1355be73
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It was observed system suspend/resume failure while running
RunInDozingStress. Apply correct GLK usb clock gating register
value to mitigate the failure.
BRANCH=octopus
BUG=b:120526309
TEST=Verified GLK clock gating register value after booting
to kernel.
Change-Id: I50fb16f5ab0e28e79f71c7f0f8e75ac8791c0747
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This reverts commit ab1227226e.
There were significant changes around soc_reset_tco_status() that this
code needs to be adapted to.
Change-Id: I563c9ddb3c7931c2b02f5c97a3be5e44fa873889
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
ARCH_RISCV_RV{32,64} will now select ARCH_RISCV.
Change-Id: Ia7a1a8f0bfab20e91b8429dd6dd3e9a4180a0a5b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Change-Id: If31e7102bf1b47c7ae94b86d981b762eda0a19e5
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/25427
Reviewed-by: David Guckian
Reviewed-by: King Sumo <kingsumos@gmail.com>
Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ratio_max step is appearing twice when (ratio_max - ratio_min)
is evenly divisible by the ratio step.
This is because in this case there are no rounding down of ratio_max in
the for loop.
Thanks Jay Talbott for the step calculation algorithm.
Change-Id: I91090b4d87eb82b57055c24271d679d1cbb3b7a7
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/25429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add new helper macros to enable configuring debounce duration for a
GPIO input. Also ensure that the debounce configuration is not masked
out.
BRANCH=octopus
BUG=b:117953118
TEST=Ensure that the system boots to ChromeOS. Ensure that the debounce
duration is configured as expected.
Change-Id: I4e3cd7744867bcfbaed7d3d96fed4e561afb2cec
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently all the helpers support configuring GPIO_DW0/1 registers. In
some architectures there is an additional configuration GPIO_DW2 register
that can be used to configure debounce duration etc. Add a helper macro
to enable configuring GPIO_DW2 pad register.
BRANCH=octopus
BUG=b:117953118
TEST=Ensure that the system boots to ChromeOS. Ensure that the current
configuration is not disturbed by turning on the GPIO_DEBUG option and
verifying the debug output before and after the change.
Change-Id: I3e5d259d007fdc83940a43cc4cd4a2b8a547d334
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There's no such limit on 64 Bit coreboot builds.
* Fix comment in cbmem.h
* Remove 4 GiB limit on Cavium SoCs
Tested on opencellular/elgon.
Still boots Linux as payload.
Change-Id: I8c9c6a5ff81bee48311e8bf8e383d1a032ea3a6d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
MT8183 only allows booting from eMMC, so we have to do eMMC emulation
from an external source, for example EC, which makes the size of
bootblock very important.
This CL adds a new function mt8183_early_init, which includes all
initializations that should be done in early stages. All mainboards
using MT8183 should manually call it in either bootblock or verstage.
BRANCH=none
BUG=b:120588396
TEST=manually boot into kernel
Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Replace device name from B0D4 with TCPU for DPTF sensor. This
helps to maintain consistency between coreboot and UEFI BIOS.
Change-Id: I962d74fc1baa07581d065734aaabb4dcd5e3d247
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
It is possible to configure debounce, but leave it disabled by specifying
a 0 value for the timeout. Add a define for allowing to do so via the
PAD_DEBOUNCE() macro.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
BUG=b:113880780
BRANCH=none
TEST=compile
Change-Id: I9de61297b0677cc904535a51c16970eecb52021d
Reviewed-on: https://review.coreboot.org/c/30998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This reverts commit b82afce18a.
Reason for revert: This causes depthcharge to not boot due to TPM timeout errors. Because there is no wait after setting the debounce register, we lose data because the read-modify-write loses the interrupt status bit.
e.g., GPIO 5 sets debounce, without a wait. Then GPIO 9 has it's debounce set. Because the interrupt controller is masking the interrupt enable status bit, the read-modify-write for GPIO9 loses the interrupt enable status bit and it never gets set again. This causes the interrupt to never latch.
We should possibly make depthcharge set the interrupt enable status bit for latched GPIOs.
Change-Id: Idd7259b14b24c441529d64e173be9faec03f4fc8
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/30981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Some SPI controllers support both READ and WRITE protection
add a variable to the protect API for the callers to specify
the kind of protection they want (Read/Write/Both).
Also, update the callers and protect API implementation.
BUG=None
BRANCH=None
TEST=test that the mrc cache is protected as expected on soraka.
Also tried if the read protection is applied correctly.
Change-Id: I093884c4768b08a378f21242ac82e430ac013d15
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/30559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
CNL,WHL and CFL all are not using midfixed option in SaGv so keeping it for
CNL only and removing it for others.
Change-Id: I754515c2f8e249479c603872c61ac9a006e962ff
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/30917
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The address bits 19:0 of TSEG_LIMIT read as zero, but are ignored on
comparison. The result is that the limit is effectively FFFFFh.
Add one MiB to the register value to make TSEG 8MiB instead of 7MiB.
Fixes a crash related to SMRR not matching the TSEG region.
Change-Id: I1a625f7bb53a3e90d3cbc0ce16021892861367d8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
RISCV parts can be created with any one of four CPU modes enabled,
with or without PMP, and with either 32 or 64 bit XLEN.
In anticipation of parts to come, create the Kconfig variables for these
architecture attributes.
Change-Id: I32ee51b2a469c7684a2f1b477bdac040e972e253
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30348
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to EDS #565870 chapter 5.3.1, AG3E bit in PMC located in PMC
memory mapped register but not pci config spaces. Change the programming
to affect that difference.
BUG=b:122425492
TEST=Change System Power State after failure to "s5 off", and boot up
onto sarien platform, check the register with iotools mmio_read32
0xfe001020 and bit 0 is set.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I0934894558fd9cbc056dea8e7ac30426c2529e4e
Reviewed-on: https://review.coreboot.org/c/30945
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FT4 has a strange property where whenever the debounce registers for any
one gpio are changed, the FT4 disables interrupt propagation for ALL
gpio irqs for ~4ms.
In other words, if an edge interrupt of one gpio happens exactly during
this debounce-irq-off window immediately following the configuration of
another gpio, the interrupt will be lost.
It is quite difficult to deal with this in the kernel, since during kernel
boot time, drivers & devices are probed asynchronously, meaning it may
happen that an already loaded driver may miss an interrupt when some
later driver is being probed and configuring its gpio interrupt.
To eliminate this possibility, we pre-configure the debounce registers in
ram stage for all gpios that will be used as irqs later by the kernel
using the same configuration as used by the kernel, as per this table:
IRQ Debounce
Edge Remove Glitch
Level High Preserve Low Glitch
Level Low Preserve High Glitch
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
BUG=b:113880780
BRANCH=none
TEST=Reboot stress test grunt (>100 times); no messages in dmesg like:
tpm tpm0: Timeout waiting for TPM ready
Change-Id: I94c7ecfb14e5bb209b3598e10287c80eb19da25b
Reviewed-on: https://review.coreboot.org/c/30921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
conf pointer could be null, access it only if its not null.
Foundby=klocwork
BUG=N/A
TEST=N/A
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0611e15d52edd8e69e4234b8ac602f35efba4015
Reviewed-on: https://review.coreboot.org/c/30862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
conf pointer could be null, access it only if its not null.
Foundby=klocwork
BUG=N/A
TEST=N/A
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I1b3d6f53d2bfd9845ad7def91c4e6ca92651d216
Reviewed-on: https://review.coreboot.org/c/30860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Add processor power limits control support to configure values.
BRANCH=None
BUG=b:122343940
TEST=Built and tested on Arcada system
Change-Id: I5990dc05b51481a0074855914cef20cf07378cde
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/30907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a new Kconfig NO_BOOTBLOCK_CONSOLE to disable the BOOTBLOCK_CONSOLE
option completely. The commit message of fbb11cf (ARM: Separate the
early console (romstage) from the bootblock console.) states that it
doesn't work before romstage on Exynos 5420.
Change-Id: I9b56a52f2555b5233300f27031a9ef50e7ab7cea
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Default to FSP binary and headers shiped in 3rdparty/fsp.
* Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de
* Select HAVE_FSP_BIN to build test the platform
* Fetch FSP repo as submodule
* Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0
* Introduce FSP_SRC_PATH for FSP source file
* Add sane defaults for FSP_FILE
Tested on wedge100s.
Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
This change provides an interface for canonlake to set TCC.
With this change, we can add code to update Tcc in devicetree.
BUG=b:122636962
TEST=Match the result from TAT UI
Change-Id: Ib54a118e4e409919e3e60112e4621a109404b16d
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/30803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Invert the default instead of selecting it everywhere. Restores the
ability to use its Kconfig prompt.
Beside Qemu targets, the only platforms that didn't select it seem
to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The
latter two were about to be patched anyway.
Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30891
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide options to disable xHCI Link Compliance Mode. Default is FALSE
to not disable Compliance Mode. Set TRUE to disable Compliance Mode.
BRANCH=octopus
BUG=b:115699781
TEST=Verified booting to kernel.
Change-Id: I2a486bc4c1a8578cfd7ac3d17103e889eaa25fe4
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30816
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move early_mainboard_romstage_entry before console_init.
Allows to setup a SuperIO, if any, for serial console.
Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
TCO2_STS_SECOND_TO was renamed to TCO_STS_SECOND_TO but one use
slipped through.
Change-Id: I9e3b1cc5cb2f319db35416edf6cea612d755d40a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30805
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It was relying on bad weak implementation for postcar
and verstage.
Change-Id: I5a520e0166198c0565349c164f143f4a43649861
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Guckian
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com>
The option to specify a binary file name was added later for platforms
that do not provide microcode updates in our blobs repository. Alas,
it wasn't visible what platforms these are. And if you specified a file
for a platform that already had one, they were all included together.
Make it visible which platforms don't provide binaries with the new con-
figs MICROCODE_BLOB_NOT_IN_BLOB_REPO, MICROCODE_BLOB_NOT_HOOKED_UP and
MICROCODE_BLOB_UNDISCLOSED. Based on that we can decide if we want to
include binaries by default or explicitly show that no files are inclu-
ded (default to CPU_MICROCODE_CBFS_NONE).
Also split CPU_MICROCODE_CBFS_GENERATE into the more explicit
CPU_MICROCODE_CBFS_DEFAULT_BINS and CPU_MICROCODE_CBFS_EXTERNAL_BINS.
And clean up the visibility of options: Don't show CBFS related options
on platforms that don't support it and don't show external file options
if the platform uses special rules for multiple files (CPU_MICROCODE_
MULTIPLE_FILES).
Change-Id: Ib403402e240d3531640a62ce93b7a93b4ef6ca5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29934
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Everything is wrong here, the Kconfig symbols are only the tip of the
iceberg. Based on Kconfig prompts the SoC code performed pad configu-
rations! I don't see why the person who configures coreboot should have
the board schematics at hand.
As a mitigation, we remove the prompts for UART_DEBUG, which is renamed
to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say
what it's about), and for UART_FOR_CONSOLE in case the former is selec-
ted.
Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch provides an option to enable or disable IPU (image processing unit),
* Add an entry for SA IPU in the pci_devs.h.
* Enable/Disable the IPU based on devicetree entry.
Change-Id: Ia155bc242dd33e816d056bbea1e3d4c1cbbe23da
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/30698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Expose the FSP tunables for the chipset minimum assertion width
settings which can be configured per-board.
The defaults appear to be different from what is listed in the FSP
header documentation so I tried to list what the actual default is
based on the source rather than what is stated the header comments.
Change-Id: Ie0606c2984727adf13c9fb8395586287162e49ca
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Add logging of chipset events on boot into the flash event log.
This was tested on a google/sarien board to ensure that events
like "System Reset" are added to the log as expected.
Change-Id: I38498cef36d8cc9c8a1f63d12618ea768b65254c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
This structure is declared as a static CAR_GLOBAL in the common
PMC library code and in the SOC specific code. Remove the SOC
specific version and instead get the chipset_power_state pointer
from the PMC library.
This fixes events that were recorded in chipset_power_state at
boot but were reading as all zero when it was time to parse the
structure when logging events to flash.
Change-Id: I67a4f724c0707d98766ad28abd8d0b66a5615745
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Link walkfcbfs.S in the C_ENVIRONMENT_BOOTBLOCK case and also in the
romstage.
This is useful for cbfs access in pre-CAR environments.
Change-Id: I9a17cdf01c7cbc3c9ac45ed1f075731f3e32f64b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Pass timestamps and BIST to romstage using the same signature
as C_ENVIRONMENT_BOOTBLOCK will.
Change-Id: Ic90da6b1b5ac3b56c69b593ba447ed8e05c8a4e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Have same usage of registers with romcc bootblock
and C_ENVIRONMENT_BOOTBLOCK.
Change-Id: Ibfa80e40f0b736a904abf4245fc23efc0cdc458d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch fixes icelake build brokenness due to bootblock size
issue.
Increase the bootblock size to 48K to match skylake. With UART
enabled we are very near the 32K limit, and with upcoming changes
to add USB devices in devicetree for a icelake board it is over
the current 32K limit.
BUG=b:122485106
TEST=Able to build dragonegg
Change-Id: I66706e66ac1bce677fe11022d0eef44b9efc2e76
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/30702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
The newest and most useful incarnation was hiding in soc/intel/common/.
We move it into the Mainboard menu and extend it with various flags to
be selected to control the default and which options are visible. Also
add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the
boolean to int conversion into Kconfig:
0 - S5
1 - S0
2 - previous state
This patch focuses on the Kconfig code. The C code could be unified as
well, e.g. starting with a common enum and safe wrapper around the
get_option() call.
TEST=Did what-jenkins-does with and without this commit and compared
binaries. Nothing changed for the default configurations.
Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently this needlessly initializes the hardware in the both the
romstage and the bootblock, but it works.
Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the
use better, related support files can be built to pre-ram stages
regardless of usbdebug being enabled or not.
Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK).
Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Expose the function that can unconditionally re-initialise
EHCI debug host and gadget.
Given the missing header in soc/intel files that prevented
building with USBDEBUG_IN_ROMSTAGE=y, it is not actually
known if those SOCs work at all for usbdebug.
Change-Id: I8ae7e144a89a8f7e5f9d307ba4e73d4f96401a79
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add possibility to update microcode from BLOBs repo.
No need to copy headers around which have an unclear license.
Tested on wedge100s:
* Microcodes are included into FIT.
* Still boots to Linux.
* 3rdparty/blobs at dd00ad1260ef1dc0ba8c55c06ab10c7639dc3eb1
Change-Id: I8ecfb7302a7fc847a51934942f6d323a4f96abba
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Write a range of memory with special pattern, and read it back to check
whether the read value same as write.
The test pattern include 8bit offset read write, 16 bit offset read
write, 32bit offset read write, and cross testing.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I30d5fbd3db2acf36e3058ba4f34558b981fba78c
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28845
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: Id1e8862ff6feb9628d37fe5300780ff56865a563
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Follow instrcution from https://doc.coreboot.org/acpi/gpio.html to
implement GPIO toggling method, covered for both CNP_LP and CNP_H pch.
BUG=N/A
TEST=Build and boot up fine on sarien platform, add an dummy STSX in
DSDT table, read back from iotools to confirm the GPIO tx state get
updated.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I006a6a8fc580c73ac0938968397a628a4ffe504f
Reviewed-on: https://review.coreboot.org/c/30461
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Cases of *dev = PCI_DEV(b,d,f) are invalid. Not caught
because files only build with __SIMPLE_DEVICE__ defined.
Remove cases of testing __SIMPLE_DEVICE__ in files that
are not build for ramstage.
Change-Id: If10a0efa187c9b1d9a5577008aa46f050f0aa309
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
