Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I7f7b2c688e46534046dc0976458c4c96614100b0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This moves common memmap functionality from skl,icl,cnl,apl to the common tree.
Change-Id: I45ddfabeac806ad5ff62da97ec1409c6bb9e89ac
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36410
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Each variant needed to define variant_early_gpio_table(), even if
it didn't need to make any changes. Added a __weak version of the
function into baseboard/gpio.c.
Certain upcoming Hatch variants will not use SPD files. Allow
SPD_SOURCES in spd/Makefile.inc to be empty.
BUG=None
BRANCH=None
TEST=Build coreboot and see that it builds without error
Change-Id: Ie946cfd7c071824168faa38fd53bd338a5a451e1
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36068
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is based on autoport.
This port is tested on a T440p without a dGPU and can boot Arch Linux
from SATA disk with SeaBIOS payload. The tested components and issues
are in the documentation.
Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If there is no alloca() macro defined, then define it as
__builtin_alloca(), as most compilers support that as an intrinsic
instead, if no alloca.h is included.
Change-Id: I8730d57ce7c2f323b52e7a5720c598fb7af16b44
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36387
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As preparation for x86_64 clean the assembly code and introduce
arch/ram_segs.h similar to existing arch/rom_segs.h.
Replace open coded segment values with the defines from the new
header.
Change-Id: Ib006cd4df59951335506b8153e9347450ec3403e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36321
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change all uN integral types to uintN_t. Make the names of host
command params/responses consistent. Use static struct initialization
to ensure all fields are initialized.
BUG=none
BRANCH=none
TEST=compiles
Change-Id: Ibe1e29e88975c85eea215adedc5f5e483243e0d6
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
As stated in CB:36334 cbmem_top() should not be called before memory is
initialized. Therefore drop the check to see if MRC finished.
Change-Id: I964a20a5e9aa69fdb75413c36a17d34b7ba00098
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Determine maximum speed by looking at either turbo flex limit or
uncore ratio limit.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I0f3a64a40cb1d28d8eb9380c2071ec748e345b88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
If CPUID leaf 0x16 is available (Skylake and later) use it to obtain
current and maximum speed. Otherwise call weak function that can be
provided elsewhere (cpu/soc/mainboard). Also, populate "core enabled"
with the same value as "core count".
TEST=tested on OCP Monolake with dmidecode -t processor
Change-Id: Ie5d88dacae6623dfa0ceb3ca1bb5eeff2adda103
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This cpuid function (0) is same across Intel and AMD so having it in
arch/x86 seems like a good idea.
Change-Id: I38f1c40bceac38ed6428f74b08bf60b971644f5a
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
The i82801ix_early_init is now called both in the bootblock and
romstage. The rationale behind setting this up twice is to ensure
bootblock-romstage compatibility in the future if for instance VBOOT
is used.
This moves the console init to the bootblock.
The romstage now runs uncached. Adding a prog_run hooks to set up an
MTRR to cache the romstage will be done in a followup patch.
The default size of 64KiB is not modified for the bootblock as trying
to fit both EHCI and SPI flash debugging needs a more space and 64KiB
is the next power of 2 size that fits it.
TESTED on Thinkpad X200.
Change-Id: I8f59736cb54377973215f35e35d2cbcd1d82c374
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With CONFIG_C_ENVIRONMENT_BOOTBLOCK it makes more sense to rely on the
size of the bootblock over CONFIG_XIP_ROM_SIZE. To make this work,
only powers of 2 are allowed as bootblock size.
Change-Id: Ic8104ca9c51e4d2eccdb277e4c2111d2da662f3e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
To make data flow more explicit, global variables 'MR01Value' and
'MR13Value' are replaced with local variables, which are passed as
function arguments.
BRANCH=kukui
BUG=none
TEST=1. emerge-kukui coreboot
2. Fast calibration succeeded
Change-Id: Id21483092c86c3ae7dbb1173a2b943defe41a379
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Also:
add some missing includes spotted by Jenkins.
Including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I7bd999b59d1c0bdfa5999bf5805576f94c9a2390
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Also, including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I7e1a3483aae0e3f0a7bc2eb2c1862ae7a325fd9c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
If a device node should be enabled on some variants, but disabled on
others, it had better be declared as disabled (rather than absent) in
base device tree (rather than override tree for the variant disabling
it), and enabled in override tree for the variant needing it, so that
it does not need to be declared once more when adding another variant
with such node disabled.
Change-Id: I4b28360905ae38149ace9ac5d21cd6d5045b7584
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This should improve boot times as it skips unnecessary read and
writes.
Change-Id: I8cf36613903783e741b2e3bfeeee5bc29ab26d5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There is no posibility to prevent loading images from cbfs at this stage
For security features prog_locate_hook() is added. This hook can be used
to prevent loading the image.
BUG=N/A
TEST=Created verified binary and verify logging on Facebook FBG-1701
Change-Id: I12207fc8f2e9ca45d048cf8c8d9c057f53e5c2c7
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change removes an inversion of GPP_D17 that caused the
device to get stuck in a reboot loop because the kernel was crashing
within the first couple seconds of kernel boot.
BUG=b:142515200
BRANCH=none
TEST=Flash and boot nocturne, verify boot is stable and that device
doesn't reboot after jumping into kernel, and that it passes the
'tast -verbose run <ip> hardware.SensorRing' test.
Change-Id: Ia1408ef6ea92f6b31a9f3eee8720954af3a7c382
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35967
Reviewed-by: Yicheng Li <yichengli@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The board does not have any graphics port connected to the SoC. Hence,
use the new Kconfig to hide GOP initialization.
Change-Id: Ia88e062bea243369da27b94608f89f0808257688
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There are mainboards that do not have any graphics ports connected to
the SoC. It would be senseless to initialize the iGD, thus add a new
mainboard Kconfig to hide the GOP option.
Change-Id: Ica3b3a7a0c8120c95412369a24d8d669fb59fded
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Also, including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I99918a5a77e759bc7d4192d2c3fd6ad493c70248
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
cbmem_top() should simply not be called before memory is initialed,
in order for the implementation to return something meaningful.
Change-Id: I8fe32844af290626a0f91279143fda4d3442680f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
Since there are no calls where we wouldn't die(), move die() calls into
the fsp_find_* functions.
Change-Id: I750a225999688137421bbc560d9d1f5fdf68fd01
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Remove the calculation of the Reserved Intel MMIO Memory size from
systemagent and memmap, since it is not needed.
The size is used in SA to calculate the space between cbmem_top and TSEG
without DPR and Chipset Reserved Memory. Since this will always be equal
to 0, the reservation will be skipped and TSEG, DPR and Chipset Reserved
Memory will get reserved alltogether.
By reading the code and pratical testing we figured out that:
- TSEG - DPR - reserved - top_of_memory == 0
- TSEG - DPR - reserved == top_of_memory
This means the whole block will never reserve anything because it is
always 0. Hence the code can be removed for simplification.
Tested successfully on X11SSM-F
Change-Id: I0cc730551eb3a79c78a971b40056de8d029f4b82
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Follow-up commit where only files are moved and paths adapted to make
review of the previous commit easier.
Change-Id: Iff1acbd286c2ba8e6613e866d4e2f893562e8973
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35868
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove orphaned functionality from the FSP1.1 driver that only has been
used by skylake, which is now FSP2.0-only.
Change-Id: I732f2d6846788d5c03647c6fb620e45b3b66de5f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36266
Reviewed-by: Michael Niewöhner
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This drops support for FSP 1.1 in soc/intel/skylake, after all boards
have been migrated to FSP 2.0, which is backwards compatible.
Any moving of files happens in a follow-up commit to make review easier.
Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is part of the patch series to drop support for FSP 1.1 in
soc/intel/skylake.
The following modifications have been done to migrate the board(s) from
FSP 1.1 to FSP 2.0:
- remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0)
TODO:
- testing
Change-Id: I7481f3413de6780df01d9b769bd4f16d439f087c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35923
Reviewed-by: Michael Niewöhner
Reviewed-by: Wim Vervoorn
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: Ic2f0944b92dcad7048a0c38720d2ef3c855ef007
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
- This port should be Reclaim Your Freedom compliant
(not certified yet).
- Untested on boards with external Radeon graphics adapter.
- Some columns on the left-most side of display are completely
black on 1400x1050 IPS display[1]. Display works fine on Linux.
I don't know why it appears like that. So far it has been observed
only with native graphics initialization.
- Only GRUB2 and SeaBIOS payloads tested for now.
- 2504 docking station USB doesn't work under Linux.
Can detect pendrive in GRUB2 payload.
- Sometimes it takes 20s of "pretending it's powered off" to run
coreboot code. Issue is payload agnostic.
Probably caused by missing one capacitor on my unit.
[1] https://imgur.com/a/0wpMGsm
Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Change-Id: I09fce1298794f30c1db699438204ac32ee9cb27d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36296
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Change-Id: I50cafce0aaf465ee95562ccff6c8f63fb22096c0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Change-Id: If3ee38f3eaa8e6d1c1b0393d0ba289f708e0ae5e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36293
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
An io_trap_handler on this board is unused in SMM.
Change-Id: Ie922f8f1a10495ae887221735c96807261508041
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
These mainboard_io_trap_handler functions do nothing compared to a weak
mainboard_io_trap_handler in src/cpu/x86/smm/.
Change-Id: I73ebcc6c3f604a075a946503d51881ccc6820dac
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Remove SMM reinitialization since it's already done in src/ec/lenovo/h8.
Untested on a real hardware.
See also commit 8953d4a1 with Change-Id
I33fd829a7e34aefa8f76ca6020cc8e802f7aab17 ("mb/lenovo/*/smihandler: Get
rid of mainboard_io_trap_handler").
Change-Id: Icc582527db15f3a31cdee8948bc5a190240fdc84
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
I does nothing on these boards. It's just a call a local noop function
which only prints a debug-level message.
Change-Id: Id3fb2e9074db72d9025b95f7d4918417dd488b9e
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Convert names to all capital in enum acpi_apic_types. Use of these names in
corresponding type assign for I/O APIC Structure.
Change-Id: Iab2f6d8f645677734df753f8bf59fde4205ce714
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36197
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_silicon_init_params() is supposed to be used for only
overriding any FSP params as per mainboard configuration. GPIOs should
be configured by mainboard as part of its chip init(). This ensures
proper ordering w.r.t. any common operations that the SoC code might
want to perform e.g. snapshot ITSS polarities.
This change moves the configuration of GPIOs from
mainboard_silicon_init_params() to mainboard chip->init().
Change-Id: I5d10c01c5b9d5f8ed02274d51dcf9c2a17269685
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36270
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_silicon_init_params() is supposed to be used for only
overriding any FSP params as per mainboard configuration. GPIOs should
be configured by mainboard as part of its chip init(). This ensures
proper ordering w.r.t. any common operations that the SoC code might
want to perform e.g. snapshot ITSS polarities.
This change moves the configuration of GPIOs from
mainboard_silicon_init_params() to mainboard chip->init().
Change-Id: I5cd89c6e24b6a4b0c20fd476915f3781a0d46e0d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36269
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_silicon_init_params() is supposed to be used for only
overriding any FSP params as per mainboard configuration. GPIOs should
be configured by mainboard as part of its chip init(). This ensures
proper ordering w.r.t. any common operations that the SoC code might
want to perform e.g. snapshot ITSS polarities.
This change moves the configuration of GPIOs from
mainboard_silicon_init_params() to mainboard chip->init().
Change-Id: Ied0201b954894acd3503801e7739b91a2cc9b4a8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36268
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_silicon_init_params() is supposed to be used for only
overriding any FSP params as per mainboard configuration. GPIOs should
be configured by mainboard as part of its chip init(). This ensures
proper ordering w.r.t. any common operations that the SoC code might
want to perform e.g. snapshot ITSS polarities.
This change moves the configuration of GPIOs from
mainboard_silicon_init_params() to mainboard
chip->init(). Additionally, this change moves mainboard_ec_init() to
mainboard dev->init().
TEST=Verified that GPIOs are configured properly and hatch boots to
OS.
Change-Id: Ia509471a3678c60454cd4f14625f151860d9b9d2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36267
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set VPD keys for DSM parameters in overridetree.cb for Helios.
RT1011 driver will load values from VPD and set them to device property.
BUG=b:140397934
BRANCH=none
TEST=On Helios, with patch series, check realtek,r0_calib and
realtek,temperature_calib are available to rt1011 codec driver.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Change-Id: Ic72fd57becf93e70a1a716dbb76633509f2fd5c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The correct mapping for speakers to their names should be:
uid 0: Woofer Left
uid 1: Woofer Right
uid 2: Tweeter Left
uid 3: Tweeter Right
Also, fix the name to be 4-character.
BUG=b:140397934, b:143192767
BRANCH=none
TEST=On Helios, with patch series, check realtek,r0_calib and
realtek,temperature_calib are available to rt1011 codec driver.
And the speaker mapping is correct.
Change-Id: I353fb9ad0ca8ec85431eb2b59be748b4887278cf
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36256
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Found-by: ACPICA 20191018
Change-Id: I8bcdfa7a4dc33c3e3866d3135249a602379b9615
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36265
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Found-by: ACPICA 20191018
Change-Id: Iaa35790a38c36091a228007d739b970cb66a3e1c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36264
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Found-by: ACPICA 20191018
Change-Id: Ic0bcaa37ac017ab61e1fb4e78d3c7dfbbcc0899d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Change-Id: Ieb54664a6528ce67634991f64a5f3c411822cdf4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36260
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Found-by: ACPICA 20191018
Change-Id: I9f55cc033b5672917520b139444bc614462c4a05
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The SOC DRAM team suggested to delay at least 1us after setting new
voltage in PMIC wrapper so the new value can be effective.
BRANCH=kukui
BUG=b:142358843
TEST=emerge-kukui coreboot
Change-Id: I19d236769c3c0c87513ea4a0a3f64b83e3a844c2
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36254
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add VPD variables for enabling/disabling FRB2 watchdog timer and
setting the timer countdown value. By default it would start the
timer and trigger hard reset when it's expired. The timer is
expected to be stopped later by payload or OS.
Right now the timer is started after FSP-M. Ideally it should be
before FSP-M (to detect memory training error).
Tested on OCP Mono Lake.
Change-Id: I82b244d08380a0461c92662e025d8b95b3133e23
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a function for initializing and starting FRB2 timer with the
provided countdown and action values, and a stop function for
stopping the timer.
Tested on OCP Monolake.
Change-Id: Ic91905e5f01b962473b6b3a9616266d2d95b1d6b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
As fmaptool can now handle the offset computation for every mentioned
region in the fmap file on its own there is no need to provide the
offset in the fmd file anymore. This patch clears this out so that the
files are way more readable now.
Change-Id: I1dc841604fdb662e08cb6690ff4bf6dd311e01d8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
RT1011 is a smart amplifier. It needs to know speaker related parameters
including speaker resistor value and temperature when the calibration is
done in order to run Dynamic Speaker Management (DSM) algorithm on chip.
The purpose of DSM is to protect speaker when the volume is large.
The calibration data of speaker is stored in VPD in factory.
This driver is needed to read data from VPD and write to ACPI _DSD when
config CHROMEOS_DSM_CALIB is turned on.
Kernel rt1011 codec driver will read these device properties to set up
codec accordingly on boot.
The reason to prepare these parameters in coreboot is because kernel
codec driver expects to read per-device parameters directly from device
properties. Another benefit is that other OS can also take these
parameters through ACPI _DSD table and take benefit of DSM on RT1011.
The kernel driver device properties of RT1011 are documented at
linux/Documentation/devicetree/bindings/sound/rt1011.txt
It is currently in ASoC maintainer's tree at
https://kernel.googlesource.com/pub/scm/linux/kernel/git/broonie/sound/+/for-next/
and hopefully should be merged to mainline kernel in the next merge window.
BUG=b:140397934
BRANCH=none
TEST=On Helios, with patch series, check realtek,r0_calib and
realtek,temperature_calib are available to rt1011 codec driver.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Change-Id: I9550b9890ce2cae787f4f17779a5ade77f619171
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
On ChromeOS, there will be VPD values for dynamic speaker management (DSM)
calibration data. They are resistor calibration values and temperature
during calibration.
These VPD fields use "dsm_calib_" prefix.
Known keys are:
"dsm_calib_r0_0"
"dsm_calib_r0_1"
"dsm_calib_r0_2"
"dsm_calib_r0_3"
"dsm_calib_temp_0"
For now these values are unsigned decimal numbers greater than 0.
This library will be used for RT1011 device driver in the patch series.
Note that in the future we may encode more values into this VPD field if
needed. We retain the flexibility for coreboot device driver or codec
driver to decode/parse the VPD values based on the needed use case
per-board.
BUG=b:140397934
BRANCH=none
TEST=On Helios, with patch series, check realtek,r0_calib and
realtek,temperature_calib are available to rt1011 codec driver.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Change-Id: Ib9579a5cc055f8f438cb30a8acaf250a343db19e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Refactor I2C driver for fsp_baytrail to match the coreboot supported I2C
bus device structure. The internal I2C controllers are now handled by
the generic PCI driver approach and generic I2C access is enabled.
As orientation for the I2C code the actual solution from
soc/intel/apollolake I2C was taken. All the I2C specific parts were
removed from lpss.c and have been implemented in the I2C driver.
Future merge to soc/intel/common/block/i2c/i2c.c would be possible.
With this patch I2C chip devices can now be used in devicetree.
TEST=Booted siemens/tcu3 and verified that access to PTN3460 worked.
Change-Id: I3b87bd7c27e4c1afcce7cd4225cca02599f43c60
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
To allow retraining memory without hotkey (for example in manufacturing
process), we want to enforce re-training when the recovery reason is set
to VB2_RECOVERY_TRAIN_AND_REBOOT (which can be done by running
"crossystem recovery_request=0xc4").
The special reason was created for X86 MRC cache, for ensuring RO
calibration data is filled (the underlying implementation was in vboot,
not coreboot); and on MT8183 we have only RW calibration, but it seems
totally fine to extend that for RW.
BRANCH=kukui
BUG=None
TEST=boots; crossystem recovery_reason=0xc4; reboot
Change-Id: Iaa5275f0e0eb90f6ab3a7d4579977a6655d59bd9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Use of typedef and modify the usage accordingly.
Change-Id: I875ef2fa31e65750233fa8da2b76d8db5db44f2d
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Use of typedef and modify the usage accordingly.
Change-Id: I65581702a60dbd286cb3910c6eeef5f9e1853cf1
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Currently only the PCIe ports 1-12 are checked for a wake event. Add
ELOG wake sources for ports 13-24, if they exist.
Change-Id: Ic96e5101ad57bdecd8cbdb66379bc274ae790e01
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Similar to VMX and SMX also enable all GetSec leaves for Intel TXT.
Change-Id: I89620c2a98cfceaa785b1a798fafbf35cc99a0b2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add code for FSP Broadwell DE to set the DPR.
Used by the Intel TXT code.
Tested on Intel Broadwell DE using Intel TXT.
Change-Id: Ib5e1ba8731e5cea1be9319a1fb9658dba841dc7b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Lock AES-NI register to prevent unintended disabling, as suggested by the
MSR datasheet.
Successfully tested by reading the MSR on X11SSM-F
Change-Id: I97a0d3b1b9b0452e929ca07d29c03237b413e521
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35188
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Avoid searching for cmos_layout.bin each time get/set_option is called
on platforms with NO_CAR_GLOBAL_MIGRATION.
Change-Id: Ie541017d2f8c8e9d4b592b71f44a08fd9670dd09
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds another x11 series board, the X11SSM-F, which is similiar to
X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and
Ethernet interfaces.
Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
This code in reality just describes the southbridge features, don't put a copy
in every mainboard.
This commit follows up on commit e288758b with Change-Id
I8cf3019a36b1ae6a17d502e7508f36ea9fa62830 ("bd82x6x: Merge common
platform ASL code").
Change-Id: Ic5260461165b794a13efd2c6d968c953f60dd253
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36229
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To fix MIPI D-PHY test failure, the hs-prepare should be less than
LimitMin from spec, and we have to enlarge TEOT margin.
BUG=b:138344447
BRANCH=kukui
TEST=Boots correctly on kukui
Change-Id: If91e7a546866299f02432be27fe778be5d7bdc5f
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
On hatch and variant HW designs supports VCCPRIM_CORE Low Voltage Mode.
VCCPRIM_CORE can be down to 0.75v when slp_s0 is asserted.
This commit enables PchPmSlpS0Vm075VSupport UPD so that FSP can
program related setttings to save power.
BUG=b:134092071
TEST=Run suspend_stress_test on kohaku and pass 100 cycles
Change-Id: Ia02ff8823883489b36349457213409496f082f36
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The previous code actually set SlpS0WithGbeSupport even when GBE is
disabled in device tree and could cause power consumption in s0ix.
This change will config PchPmSlpS0VmRuntimeControl, PchPmSlpS0Vm070VSupport,
PchPmSlpS0Vm075VSupport by device tree.
SlpS0WithGbeSupport will be set only when s0ix and gbe are enabled.
BUG=b:134092071
TEST=Run suspend_stress_test on kohaku and pass 100 cycles
Change-Id: I154a4e6970f99360aeb880d576eb61528034f7b6
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Commit 680027edf6 fixed a null dereference and logic bug in the tegra210
spi code:
soc/nvidia/tegra210: Fix potential NULL pointer dereference
Recent Coverity scan indicated potential NULL deference; if either
spi->dma_in or spi->dma_out are NULL, the fifo_error() check could
dereference a NULL pointer.
Also fixed what appears to be a logic bug for the spi->dma_out case,
where it was using the todo (count) from spi->dma_in.
Coverity is warning about the same problem for tegra124, so apply the
same fix there. Also, add braces around a while statement.
Change-Id: I6a7403417ee83b703cf4ca495129f73c66691ea9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 124183, 124185
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Autoport generates these structures as static so let's make it consistent.
This commit follows up on commit 6752b615 with Change-Id
I4e07bd755ca4a65b76c69625d235a879fe7b43cb ("mb/*/*/gpio: Use static for
const structures").
Change-Id: Iaf9c796ca41218a9460ca6e0f64ef3e21a2ed2ff
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Build of the entire smm-class is skipped if we have
HAVE_SMI_HANDLER=n.
This commit follows up on commit 9265f89f with Change-Id
I10b4300ddd18b1673c404b45fd9642488ab3186c ("arch/x86: Avoid
HAVE_SMI_HANDLER conditional with smm-class").
Change-Id: If0e2a57283689a3cd1b97ee6e3c616fdefc0a028
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Change GPP_B21 default to low. This can prevent power leakage
of non-touch sku.
BUG=b:142849034
BRANCH=N/A
TEST=Measure the power of non-touch sku, check GPP_B21 is 0V.
Boot up with touch sku and check touch functional.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I80a3e5dc224e4dab97c21fd469d8c3f2d3e774e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com>
Configure enable pin GPP_D9 pull high when active
BUG=b:143046441
TEST=build bios and verify touch screen works fine
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I83060f31d4d22c9be05bba119816c6aa66e4126c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36186
Reviewed-by: Philip Chen <philipchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Updated Authors file is in a separate commit.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia0a07df6ca1fdaa2837ce8839057057cbd44d157
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Updated Authors file is in a separate commit.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I1acea8c975d14904b7e486dc57a1a67480a6ee6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Evaluated using 32-bit arithmetic, then used in a context that
expects an expression of type UINT64. Cast to UINT64 instead.
Change-Id: I4f0aa26e116b47505633897c790ca8e86ea5dc4e
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Code sets `Status = TRUE` in section of code that can only be
reached if `Status == TRUE`.
Change-Id: Id9a49476d17a5ca141994b0d5dfc5e5c62a00f0e
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Use uintptr_t instead of uint32_t to fix compilation on x86_64.
Change-Id: I5584f849202c0a833c751a80bdd9a8f86c60169a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36172
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move USB ports from the common devicetree to the variants' overridetree
as they differ at least for X11SSH-TF and X11SSM-F.
Change-Id: I9bee3a8f6185296cadcee013a8dbe8dca256bf0b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Rename the freeranges array to better match what they represent, i.e.
ranges that are used by the current running program and CAR region that
is not unallocated.
Skip adding the CAR region if cache-as-RAM is not active.
Change-Id: I78ee5536d890f30450a5ad2a753c948b02634d6d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36110
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a driver that can properly configure the pads needed to run the
correct audio mode. I2S requires the 48M oscillator enabled
regardless of an external connection.
Change-Id: I1137eae91aa28640ca3e9e2b2c58beed2cdb7e3c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch is part of the patch series to drop support for FSP 1.1 in
soc/intel/skylake.
The following modifications have been done to migrate the board(s) from
FSP 1.1 to FSP 2.0:
- remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0)
- drop FSP-1.1-only romstage.c and spd.c
TODO:
- testing
Change-Id: I9d312ac959a7dac4b018d5ca1d007b1347bcf1dd
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch is part of the patch series to drop support for FSP 1.1 in
soc/intel/skylake.
The following modifications have been done to migrate the board(s) from
FSP 1.1 to FSP 2.0:
- remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0)
- switch to using the FSP default VBT
TODO:
- testing
Change-Id: Id747ef484dfdcb2d346f817976f52073912468d0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Icc/Loadline automatic detection is supported only for FSP2.0
These changes are in accordance with the documentation:
[*] S-Platforms, Document Number: 332687-008EN
[*] H-Platforms, Document Number: 332986-010EN
[*] U/Y-Platforms, Document Number: 332990-008EN
Change-Id: I8e517d8230c251e0cd4b1d4f1b9292c3df80cb19
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Similar to MRC cache on x86 platforms, when a hotkey is pressed during
boot, the calibration data cache saved in the flash will be cleared,
consequently triggering DRAM retraining (full calibration) in the next
boot.
BRANCH=kukui
BUG=b:139099592
TEST=emerge-kukui coreboot
Change-Id: I2f9225f359e1fe5733e8e1c48b396aaeeb9a58ab
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
SoC DRAM team suggested always running full calibration mode in recovery
mode because it is possible to get unstable memory even if the complex
memory test has been passed.
Since the recovery mode runs from RO and we only have training data
cache for RW, the trained calibration data can't be saved since RO and
RW may be running different firmware.
Also revised few message to make it more clear for what calibration mode
(fast, full, or partial) has been executed.
BRANCH=kukui
BUG=b:139099592
TEST=emerge-kukui coreboot
Change-Id: I29e0df71dc3357462e15ce8fc2ba02f21b54ed33
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This reverts commit d5018a8f78.
Reason for revert: Breaks boot on Whiskey Lake-U boards
Both System76 and Purism have had memory initialization failures
when this patch is applied, with the following error message:
Failed to accommodate FSP reserved memory request!
An extra 4096 bytes needs to be reserved for the FSP on these
systems, and reinstating the PTT reservation does this as
expected. PTT is enabled for the System76 galp3-c in the
ME configuration, which is why the behaviour is different.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
CC: Matt DeVillier <matt.devillier@gmail.com>
CC: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ib82f02c4a2b1cd2dbf95d4ca4a9edd314e78edd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35924
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: Iddcef560c1987486436b73ca1d5fc83cee2f713c
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Akemi unused devices declare:
- I2C #1 gpio_keys
- close I2C #3
- close GSPO #1
BUG=b:142800988
TEST=Reboot stress test and suspend stress test, the DUT will be
able to working properly
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ibff1446ccb213abce1a2ae19718774d9d6737cc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36086
Reviewed-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Renamed mainboard.h to logo.h as it only contains
logo related items.
BUG=N/A
TEST=tested on fbg1701
Change-Id: I921ae914c13d93057d5498d8262db2c455b97eaf
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
An important piece of information contained in the APCB is a copy of
SPD-type data to use for soldered down memory. The amdfwtool has
been updated with the ability to build five APCBs into the PSP's BIOS
Directory Table. Modify Picasso's Kconfig and Makefile.inc to take
advantage of the flexibility, and pass the correct instance ID to
amdfwtool.
Change-Id: I0efa02cb35f187ca85a8f0d8bd574fc438e6dc0a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Skip calling vbt_get() if FSP is not supposed to run GOP.
Change-Id: I6b8cd3646ffcd6df39229d4e36b315dfb7a8c859
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The current DCACHE_BSP_STACK_SIZE is set to 128KiB for CML & ICL when
FSP uses the same stack provided by coreboot. This patch updates it to
129KiB since the default value of DCACHE_BSP_STACK_SIZE must be
the sum of FSP-M stack requirement (128KiB) and CB romstage
stack requirement (~1KiB).
BUG=b:140268415
TEST=Build and boot CML-Hatch.
Change-Id: Icedff8b42e86dc095fb68deb0b8f80b2667cfeda
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36032
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Let the mainboard decide whether to let coreboot load the verb table.
Change-Id: I8f05ac02f690a43ada470916f5292b83aeaa8a4f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35274
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the driver work with stepping=0.
Change-Id: Id0961369b9cc9cfe1b0c09ebc50e6966ccd2e919
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35273
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Prepare for products that can use any DRAM for TSEG.
Include an ID for data pointed to by an ACPI BERT table. This region's
only requirement is it is marked reserved.
Change-Id: Ia6518e881b0add71c622e65572474e0041f83d61
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36115
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clarify names as I2C2, etc. Use iomap.h defines for base addresses.
Update IRQs.
Change-Id: I3800592e4b0bcb681d0dcf24f69e269f845be025
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add a function to uart.c to ensure the right IOMux settings are
programmed for the console UART. Update Kconfig to reflect the
new addresses.
Give the user the ability to downclock the UARTs' refclock to
1.8342MHz.
Add the abiltiy to use an APU UART at a legacy I/O address.
Update the AOAC register configuration for the two additional
UARTs.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I74579674544f0edd2c0e6c4963270b442668e62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add Picasso's Device ID and default filename.
Only a single Device ID is documented for Picasso so remove the oprom
remapper function.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iaf43d7c8da41beb05b58c494f0a6814f8f571b18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34422
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso's SATA controller operates only in AHCI mode. Remove the
Kconfig symbols previously used to select between other possibilities.
Change-Id: Iaeb8b4a2540e976d2e7361faf8c6d261e60398fd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
SATA is no longer defined in AOAC so remove its definitions.
Change-Id: Ief0ab6b5f69f2d17c11d8e2ee40941ac56c077f6
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Picasso's FCH has many similarities to Stoney Ridge, so few changes
are necessary. The most notable changes are:
* Update the index values for the C00/C01 interrupt routing
* FORCE_STPCLK_RETRY is not present
* PCIB is not defined
* FCH MISC Registers 0xfed80e00 numbering has changed
* C-state base moves from PM register to MSR
* Add option to determine the intended MUX settion for LPC vs. eMMC
* Remove the LEGACY_FREE option
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I69dfc4a875006639aa330385680d150331840e40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The standard PCI register space for D14F0 is accessible at 0xfed80000.
Add functions for use as helpers.
Change-Id: Icbf5bdc449322c3f5e59e6126d709cb2808591d5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The LPC-ISA bridge supports two ranges for SuperIO control registers.
Add a generic function to allow a mainboard to enable the appropriate
range. Provide #define values that are more descriptive than the
register's field names.
Change-Id: Ic5445cfc137604cb1bb3ee3ea4c3a4ebdb9a9cab
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35271
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change to the appropriate device IDs. Remove the ehci resource
call. Remove overcurrent settings, as this will be passed to
AGESA in later change.
Remove unused USB2 ACPI name assignment.
Change-Id: Ic287a05b30ca03e3371cc4a30aaa93b236c6d3fb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add Kconfig options and Makefile command line options to generate
the amdfw.rom image. A new intermediate image is introduced, which
is the initial BIOS image the PSP places into DRAM prior to
releasing the x86 reset. The amd_biospsp.img is a compressed
version of the romstage.elf program pieces.
Additional details of the PSP items are not public information. See
NDA document PID #55758.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ib5e393e74ed60e968959012b6275686167a2d78a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix compiler warning by adding an additional check for the fastpath
memset.
Change-Id: I9a80438995bafe7e436f3fe2180b8c9574eeff23
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35682
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is similar to X200s, with U-series CPU, slightly different gpio
setup, no docking support, and no superio chip.
Tested:
- CPU Core 2 Duo U9400
- Slotted DIMM 4GiB*2 from samsung
- Camera
- pci-e slots
- sata and usb2
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from
Linux payload (Heads) and Seabios.
TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in
CB:4294 ) for h8-using devices without a dock.
Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit creates a dood variant for Octopus. The initial settings
override the baseboard was copied from variant bobba.
BUG=b:141960652
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: Id8852e1f04f4356fac5445f6da6d56d430c88ad0
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
* Add cbfsoption --ibb to mark files as IBB
* Will be used by "Legacy FIT TXT" boot
Change-Id: I83313f035e7fb7e1eb484b323862522e28cb73d4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
* Mark files in CBFS as IBB (Initial BootBlock)
* Will be used to identify the IBB by any TEE
Change-Id: Idb4857c894b9ee1edc464c0a1216cdda29937bbd
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This corrects the LPC/eSPI lock bit from bit 2 to bit 1 in accordance
with doc#332691-003EN and doc#334819-001.
Change-Id: I45335909b1f2b646e4fafedd78cb1aaf7052d60c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This port is based on NCT6776
Change-Id: Ib8d64e8faa74802ab0213d87881e57d4d9bd1c35
Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35028
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FBG-1701 revision 1.3 will use Kingston onboard memory.
Add Kingston SPD file.
When Samsung memory configuration is disabled use
cpld_read_pcb_version() for using correct SPD data.
BUG=N/A
TEST=Boot and verified on Facebook FBG-1701 revision 1.3
Change-Id: I2e1d1b933d5a49a7005685ed530c882429019027
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35792
Reviewed-by: Wim Vervoorn
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change d3a1a417 "src/superio: Remove unused superio chips" removed
all unused devices except for ones used on mainboards still under
review. The SMSC 1036 was inadvertenly also removed as well. This
device is used in debug cards that may be connected to AMD CRBs.
This patch restores the smsc1036 directory as-is and then corrects
the following lint messages.
* WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
* ERROR: else should follow close brace '}'
* WARNING: braces {} are not necessary for single statement blocks
Change-Id: I851826e12032f802b9b2ff86d5a0eb99871bee6d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36119
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move all code involving the cpld to a single file.
Rename mainboard_read_pcb_version() to cpld_read_pcb_version().
BUG=N/A
TEST=tested on fbg1701 board
Change-Id: I9ee9a2c605e8b63baa7d64af92f45aa07e0d9d9e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36095
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The change applies the DPTF parameters.
BUG=b:142849037
TEST=build and verified by thermal team
Change-Id: I5da8d373f38d23929ffec95bc1c9e942f131297f
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The DRAM calibration blob can be compressed using pre-RAM algorithm
(currently LZ4), which will save ~12ms in boot time.
On Kodama, boot time difference:
Before: 1,082,711
After: 1,070,309
BUG=b:139099592,b:117953502
TEST=build and boot, cbfstool coreboot.rom print -v (see dram compressed)
BRANCH=kukui
Change-Id: Ic3bd49d67ee6f80a0e4d8f6945744642611edf64
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Chrome OS firmware images have moved bitmap resources from GBB into CBFS
for a long time, so the GBB should only hold firmware keys and HWID,
that is usually less than 10k.
ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but
many recent x86 simply copy from old settings and may run out of space
when we want to add more resources, for example EC RO software sync.
Note, changing the GBB section (inside RO) implies RO update,
so this change *must not* be cherry-picked back to old firmware
branches if some devices were already shipped.
BRANCH=none
BUG=None
TEST=make # board=darllion,hatch,kahlee,octopus,sarien
Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The two GPIO functions variant_gpio_table() and
variant_early_gpio_table() provide the pointer to the variants GPIO
table for late and early GPIO init. As these functions are variant
dependent the keyword __weak must not be used as otherwise the linker
might choose the tables from the baseboard.
This patch removes the __weak definition making these functions
overriding the general ones in baseboard/gpio.c.
Change-Id: Ic7fc816d40cb112d7ab51089c3962a77798c08a8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36094
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To make data flow more explicit, global variable 'impedance' is replaced
with a local variable, which is passed as a function argument.
BUG=none
BRANCH=kukui
TEST=Krane boots correctly
Change-Id: I0f6dacc33fda013a3476a10d9899821b7297e770
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
The patch adds config MT8183_DRAM_DVFS to enable DRAM calibration with
multiple frequencies to support DVFS switch.
BUG=b:80501386,b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I97c8e513dc3815a2d62b2904a246a1d8567704a4
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This patch supports voltage adjustment for each DRAM frequency, which is
neccesary to support DVFS switch.
BUG=b:80501386,b:142358843
BRANCH=none
TEST=Boots correctly and stress test pass on Kukui.
Change-Id: I9539473ff708f9d0d39eb17bd3fdcb916265d33e
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
DRAM DVFS needs to be calibrated with different vddq voltages to get
correct parameters.
A new API is added to allow changing vddq voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vddq voltage with multimeter
Change-Id: I5f0d82596a1709bf0d37885f257646133f18f210
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35147
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DRAM DVFS needs to be calibrated with different vdram1 voltages to get
correct parameters.
A new API is added to allow changing vdram1 voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vdram1 voltage with multimeter
Change-Id: Ia15ab3a2e1668e5b4873d317b57a38ebee037709
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33186
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Most coreboot debug messages are sent to UART and cbmem console, and we
also want to collect DRAM calibration module output, especially for
cbmem console (so we can see the logs after kernel is up).
Instead of sharing whole cbmem/cbtable/cbmemconsole implementations, we
want to simplify that by a simple function pointer so output can be
preserved by do_putchar, which internally sends data to all registered
consoles (usually cbmem console and UART).
BUG=b:139099592
TEST=make; boots properly for full-k, with and without serial console.
BRANCH=kukui
Change-Id: I1cf16711caf3831e99e17b522b86694524425116
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36056
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AGESA and binaryPI set the whole CACHE_ROM_SIZE to WRPROT during the
romstage and do not reference the CONFIG_XIP_ROM_SIZE symbol.
Change-Id: I548b9c9066d825c2f03749353b9990b2efddfd9c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested with CONFIG_H8_FN_KEY_AS_VBOOT_RECOVERY_SW to switch between
RW_A and recovery, which works quite well as a developer mode to test
RW_A with the COREBOOT slot as a fallback.
Change-Id: I9d524988e991457032f63a947606d1b3581de5e7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
During the raminit the CPU gets reset but the platform does not. To
deal with TPM init failure (a TPM can only be started up once) ignore
the invalid POSTINIT return code.
Change-Id: Ib15e796914d3e6d5f01b35fa46b3ead40f56122b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36055
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are use cases where TPM has already been set up in a previous
stage, e.g. TXT or when a CPU reset without a platform reset happens.
If this is the case the TPM startup will return a
INVALID_POSTINIT (return code 0x26). This adds a Kconfig to allow
platforms to disregard that return code.
Change-Id: I238b30866f78608c414de877b05a73cf8fdb9bbd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The checksum is stored in the header of calibration data and saved to
SPI flash. After reading the data from flash, checksum is used to verify
the integrity of the calibration parameters.
BUG=b:139099592
BRANCH=kukui
TEST=Calibration data successfully loaded from flash
Change-Id: Ie4a0688ed6e560d4c0c6b316f44e52fd10d71a9d
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
In broadcast mode we only need to set registers for channel 0
instead of all channels.
BUG=none
BRANCH=kukui
TEST=emerge-kukui coreboot
Change-Id: I22a4b69fd40d1978fa7b12e8edaba00ce5d7787d
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Replace the magic clrsetbits_le32, read32, write32 by SET_BITFIELDS and
other bit field helpers.
Change-Id: I327297dd10718fbef7275fe95c95d00d3ab6ac84
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35471
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If DRAM calibration fails or mem test fails using the cached calibration
results stored in flash, rerun DRAM full calibration. If partial
calibration fails or the mem test following it fails, hang forever.
Partial calibration acts as a fallback approach in case of full
calibration failure. Therefore, if it fails, there would be no other
ways to initialize DRAM. Instead of falling into reboot loop and
draining out of battery, it is better to just hang so that the end user
may notice that and send to RMA.
BUG=b:80501386,b:139099592
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I8e1d4f5bc7b45f45a8bfef74e86ec0ff6a556af4
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35481
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is already done in nb/intel/nehalem/romstage.c.
Change-Id: I2dc34af874ac96af31ca9ebe6a43b2805da32d18
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
During the raminit the CPU gets reset, so reprogram those bits in
PM1_CNT such that the CPU remains aware that this is a S3 resume path
after the reset.
Change-Id: I8f5cafa235c8ab0d0a59fbeeee3465ebca4cc5d0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This decreases the output verbosity of RAM_DEBUG to be useful.
Change-Id: I9fa681303da0e063dd2ca789d7711151b2365f16
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36036
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tune I2C bus 1 clock and insure it meets I2C spec.
BUG=b:142683257
TEST==flash coreboot to the DUT and measure I2C bus 1 clock
frequency less than 400KHz
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Id4cdbad4dd9d451763fb536988402d6e6fe3a378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update power sequence to meet spec.
BUG=b:142710867
TEST=touchscreen work, and make sure power sequence to meet
spec with vendor.
Change-Id: I98f8b095374caa8c3540307a51f9d3b69baec905
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36060
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the SPD data for MT40A1G16KD-062E:E
BUG=b:139397313
TEST=Compile successfully.
Change-Id: I3d1ae9269ff3129845a7f53dbacbab6e1b66b6d5
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
I tested the SPI through the SD card and fixed sd card communication problem.
Added two functions (claim_bus and release_bus). Setting CS signal is invalid by
default.
Change-Id: I60033a148c21bbd5b4946580f6cab0b439d346c6
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It turned on some SKUs FSP hangs in Notify stage if IIO root ports are
disabled after MemoryInit. To address that hide IIO root ports earlier
in romstage.
TEST=the patch was ran on affected HW and success was reported
Change-Id: I6a2a405f729df14f46bcf34a24e66e8ba9415f9d
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This sets up some common default LPC decode ranges in a common place.
This may set up more decode ranges than needed but that typically does
not hurt. Mainboards needing additional ranges can do so in the
mainboard pch_enable_lpc hook.
Change-Id: Ifeb5a862e56f415aa847d0118a33a31537ab8037
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
As VGA_ROM_RUN and libgfxinit are mutually exclusive in Kconfig,
we don't have to guard all the VGA BIOS if's and can assume
gfx_get_init_done() returns 0 until all the quirks are handled.
Then, we can run libgfxinit.
Change-Id: Id5d0c2c12b1ff8f95ba4e0223a3e9aff27547acd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Port the backlight-PWM handling from Skylake instead of the previously
used Haswell version. We use a 200Hz PWM signal for all boards. Which
is higher than the previous devicetree value, 183Hz, but that was over-
ridden by the VBIOS anyway. 200Hz is still very low, considering LED
backlights, but accurate values are unknown at this time.
Lynx Point, the PCH for Haswell and Broadwell, is a transition point
for the backlight-PWM config. On platforms with a PCH, we have:
o Before Lynx Point:
The CPU has no PWM pin and sends the PWM duty-cycle setting
to the PCH. The PCH can choose to ignore that and use its own
setting (BLM_PCH_OVERRIDE_ENABLE).
We use the CPU setting on these platforms.
o Lynx Point + Haswell:
The CPU has an additional PWM pin but can be set up to send
its setting to the PCH as before. The PCH can still choose
to ignore that.
We use the CPU setting with Haswell.
o Lynx Point + Broadwell:
The CPU can't send its setting to the PCH anymore. BLM_PCH_
OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is
used (it virtually always is).
We have to use the PCH setting in this case.
o After Lynx Point:
Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is
implied and the bit not implemented anymore.
Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On some configuration coreboot boots too fast and the EC reports the
max temperature, resulting in Linux shutting down immediately.
Change-Id: I610c7c9fbf2130566d3c2c758f1796314d3a0973
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Link files to provide snprintf used by VBOOT code.
Change-Id: I040c3952c22893da5aae11b20a618aa4006c6c58
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Required for new VB2_ASSERT and VB2_DIE macros in vboot code.
(See chromium:972956.)
BUG=b:124141368, chromium:1005700
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I61a1036ccab80862d6eb12f9f72286f29e8478cf
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Enable wifi sar feature and set wifi sar name for dragonair sku.
BUG=b:142109545
TEST=emerge-hatch coreboot chromeos-bootimage
1. Check wifi_sar-dragonair.hex in /cbfs-rw-raw/dratini
2. Add iwlwifi.debug into kernel params.
3. check SAR value from dmesg only when sku id is 21/22
Change-Id: I0e08610b7c7d2d8da5a749d278bcde26af590e31
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
APL unhides the P2SB device in coreboot already. Do the same on SKL/KBL.
As the coreboot PCI allocator needs to be able to find the device,
unhide it after FSP-S.
The device is hidden in the SoC finalize function already and not visible
in the OS, as more P2SB device IDs have been added.
Other SoCs aren't updated, because they are too broken.
Fixes "BUG: XXX requests hidden ...." warnings in coreboot log.
Tested on Supermicro X11SSH-TF.
Change-Id: I0d14646098c34d3bf5cd49c35dcfcdce2c57431d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Michael Niewöhner
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written
when already locked by the sibling thread. In addition it loads microcode
updates on all threads.
To prevent such race conditions only call the code on one thread, such
that the MSRs are only written once per core and the microcode is only
loaded once for each core.
Also add comments that describe the scope of the MSR that is being
written to and mention the Intel documents used for reference.
Fixes crash in SGX MP init.
Tested on Supermicro X11SSH-TF.
Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The port is based on the x201 / t410s.
2537-vg5 / i5, no discrete gpu
Tested and working:
* Native raminit
* Native gfxinit
* Booting Seabios 1.12.1
* Booting from EHCI
* Running GNU/Linux 5.0.0
* No errors in dmesg
* EHCI debug on the devices left side, bottom-right
* Keyboard
* Fn keys (Mute, Volume, Mic)
* Touchpad
* TPM
* Wifi
* Sound
* USB
* Ethernet
* S3 resume
* VBOOT
Testing in progress.
Untested:
* VGA
* Displayport
* Docking station
Bugs:
* AC adapter can't be read from ACPI
* TPM not working with VBOOT and C_ENV BB
Details for flashing externally:
1. Disconnect all power
2. Connect the external flasher
3. Connect the power cord (This fixes internal power control)
4. Remove the power cord
Change-Id: Id9d872e643dd242e925bfb46d18076e6ad100995
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/11791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This assumes ACPI aware OS also have a driver for this particular
hardware, which is the case for at least Linux. This saves ~60ms on S3
resume.
Change-Id: I2dcd399fee8e2d1cd1b70e60e1669a49c7aa8cb4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This does the following:
- Add gen[1-4]_dec options to the devicetree to set up generic LPC
decode ranges in the southbridge code.
- Move setting up some default decode ranges to a common place. If
somehow a board needs to override this behavior it can happen in the
mb_setup_superio() hook (that will be renamed when moving to
C_ENVIRONMENT_BOOTBLOCK).
Change-Id: I3d904b1125bc410c11aa73a89b1969284e88dac1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
These SIOs are not being used or tested by abuild, so remove them from the
tree. The only 3 currently unused SIOs that don't get removed here have board
ports in review.
src/superio/fintek/f71805f
src/superio/fintek/f71872
src/superio/intel/i8900
src/superio/ite/it8671f
src/superio/ite/it8716f
src/superio/nsc/pc87309
src/superio/nsc/pc87360
src/superio/nsc/pc87366
src/superio/nsc/pc97317
src/superio/smsc/dme1737
src/superio/smsc/lpc47b272
src/superio/smsc/lpc47b397
src/superio/smsc/sch4037
src/superio/smsc/sio1036
src/superio/via/vt1211
src/superio/winbond/w83697hf
src/superio/winbond/wpcd376i
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I61d486d2c1e2b85eb292eaa78316c36e1735ebf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
A few notable changes:
- Microcode init is done in assembly during the CAR init.
- The DCACHE_BSP_STACK_SIZE is set to 0x2000, which is the same size
against which the romstage stack guards protected.
- The romstage mainboard_lpc_init() hook is removed in favor of the
existing bootblock_mainboard_early_init().
Change-Id: Iccd7ceaa35db49e170bfb901bbff1c1a11223c63
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Some of the initialization isn't necessary before console INIT is
done.
EHCI debug still works fine on the Lenovo Thinkpad X201.
Change-Id: I0c33efd98844f7188e0258cf9f90049d45145e7c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35949
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows to read and set bits in the EC ram in the bootblock or
verstage. This can be useful if one needs to read a keyboard key as an
input for get_recovery_mode_switch in vboot.
Change-Id: I20b2264012b2a364a4157d85bfe5a2303cc5e677
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The NO_POST option covers more than classical port 80 output, hence
selecting it seems wrong in any case. The default is still rather
user patronizing, but let's keep it.
As a side effect, this fixes the ability to override the default
for NO_POST which Kconfig rejected while these boards selected it.
(Seems like a bug in Kconfig, though.)
Change-Id: I896b08812b1aa6ce249d7acc8073ebcc0f72eace
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Some boards with the G41 chipset lacked programming CIR, so this
change add that to those boards too.
Change-Id: Ia10c050785170fc743f7aef918f4849dbdd6840e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The vendorcode/eltan mboot and verified boot options only build if a
few other Kconfig options are defined.
Change-Id: Ie333d2fbf294e23ec01df06ee551e2d09541c744
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35954
Reviewed-by: Wim Vervoorn
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is only one subdir in vendorcode/siemens and it does not feature
a Kconfig file.
Change-Id: I136743344465cea9c769234aa84d9ebe874ef0d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The next board rev will have a new option for an Elan touchscreen. Add
support for this in the devicetree, as well as use the 'probed' property
on both touchscreen options.
BUG=b:141957731
BRANCH=none
TEST=compiles (next board rev not available yet)
Change-Id: I135e693304cbb8dffc0caf4c07846033d6802208
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Update GPIO_138 and GPIO_139 setting to fix EMR function.
BUG=b:141729962,b:141281846
BRANCH=octopus
TEST=verify EMR function in Grob360S.
Change-Id: I28cef592374fb4aeee2f3d3010cc0e237d62a2fd
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Rework SGX enable status in a clean way without using a global variable.
Change-Id: Ida6458eb46708df8fd238122aed41b57ca48c15b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is done by default in the main Makefile.inc.
TEST: With BUILD_TIMELESS=1 the resulting binary is identical before
and after the change.
Change-Id: Ie85e023df1f1c2b0f115e4f92719a511f60019c3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Since struct dramc_param has been defined, we can pass the struct
directly from mt_mem_init().
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: If7333fb579eff76dd9d1c2bf6fdfe7eccb22050f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35846
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Load the calibration params from flash first and check the correctness
of the params. If the params have correct format, perform DRAM fast
calibration with these params to reduce bootup time. Otherwise, load the
DRAM blob and perform DRAM full calibration.
Bootup time of DRAM partial calibration:
- 1,349,385 usecs with low frequency
- 924,698 usecs with middle frequency
- 1,270,089 usecs with high frequency
3,544,172 usecs in total.
Bootup time of DRAM fast calibration:
- 216,663 usecs with low frequency
- 328,220 usecs with middle frequency
- 322,612 usecs with high frequency
867,495 usecs in total.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Load calibration params from flash. If the format of the params is
correct, use these calibration params for fast calibration to reduce the
bootup time.
Bootup time of DRAM partial calibration:
- 1,349,385 usecs with low frequency
- 924,698 usecs with middle frequency
- 1,270,089 usecs with high frequency
3,544,172 usecs in total.
Bootup time of DRAM fast calibration:
- 216,663 usecs with low frequency
- 328,220 usecs with middle frequency
- 322,612 usecs with high frequency
867,495 usecs in total.
BUG=b:139099592
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The dramc_param module simplifies the communication between coreboot and
MTK DRAM full calibration blob, and is shared by both implementations to
ensure the same format of parameters.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I4cfd634da1855a76706aab0b050197251e2ed4dd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Since we always write to &ch[chn].ao.dummy_rd after calling
dramc_engine2_end(), this write could be merged into dramc_engine2_end()
to simplify code.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Ibb4bd5ed016118811ad2097098417c19f00f4263
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35749
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is now done during the romstage.
Change-Id: I7c1a848ae871ffb73c09ee88f96331d6b823e39d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
FreeBSD's sh (basic posix shell) did not interpret the '\%o' escape
in the same way bash/zsh do. As a result, the decoded files ended up
with ASCII numbers instead of the decoded binary data.
Change-Id: I95b414d959e5cd4479fcf100adcf390562032c68
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Minimize use of hard-coded value for acpi_table_header->length to soft
code. Replace length of acpi_header_t with sizeof(acpi_fadt_t).
Change-Id: Ibcae72e8f02497719fcd3f180838557e8e9abd38
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Nuvoton and Winbond use the same off-by-5 indirect address space to
access their hardware monitor/environment controller in the SIO chip, so
move this to a common location and replace the inb/outb calls with the
corresponding inline functions from device/pnp.h
Change-Id: I20606313d0cc9cf74be7dca30bc4550059125fe1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The superio driver that was linked in is nct6779d but static
devicetree expected symbol superio_nuvoton_nct5572d_ops.
Change-Id: I648b7680bb39b9ff5b38cc3bd5147bd336e0b282
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Devices behind LPC can expose more buses (e.g. I2C on a super-i/o).
So we should scan buses on LPC devices, too.
Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
scan_usb_bus() and root_dev_scan_bus() had the very same implementation.
So rename the latter to scan_static_bus() and use that for both cases.
Change-Id: If0aba9c690b23e3716f2d47ff7a8c3e8f6d82679
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Setting the cbfs prefix is prone to error. Therefore add a Kconfig
choice for 2 common values, fallback and normal, while still keeping
the ability to specify an arbitrary value.
Change-Id: I04222120bd1241c3b0996afa27dcc35ac42fbbc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The value stored to 'spd_bytes_total' is never read. Now it is fixed.
This is spotted using clang-tool v9.
Also add a check if spd_bytes_used and/or spd_bytes_total are reserved
and make sure that spd_bytes_used is not greater than spd_bytes_total.
Change-Id: I426a7e64cc4c0bcced91d03387e02c8d965a21dc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For fields with single bit, it's easier to declare as
DEFINE_BIT(name, bit)
Change-Id: If20e6b1809073b2c0dc84190edc25b207bf332b7
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Applying reset_gpio config of stylus for kohaku. GPP_A19 has been assigned in
the latest schematics.
We would keep GPP_A10 as output high for old revision devices temporarily.
BUG=b:141914474
BRANCH=none
TEST=verified stylus works internally
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: I61f0f9a4378f47bf455f0726d44beeaf2f67197b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Add PRESERVE to UNIFIED_MRC_CACHE so that we don't retain the memory
training data upon a FW update unless we need to. We have had users
complaining that a 15 second memory training upon update makes them
believe that their device is not booting, thus many of them hard
resetting before bootup.
BUG=b:142084637
BRANCH=None
TEST=flash RW_SECTION_A, RW_SECTION_B, and WP_RO sections and make
sure memory training doesn't occur on following bootup.
Change-Id: Ia5eb228b1f665a8371982544723dab3dfc40d401
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35803
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The new name should reflect better what this function does, as that
is only one specific step of the scanning.
Change-Id: I9c9dc437b6117112bb28550855a2c38044dfbfa5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31900
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
RCBA_HPTC needs to be read back to consistently enable HPET.
This ought to fix raminit failing sometimes and SeaBIOS endlessly
waiting for user input.
TESTED on Intel D510MO, Fixes SeaBIOS waiting for input, without a
timeout.
Change-Id: I20a25fd97cd09fedb70469262c64d8d3828bb684
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35758
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
So, the PCI to PCI bridge specification had a pitfall for us:
Originally, when decoding i/o ports for legacy VGA cycles, bridges
should only consider the 10 least significant bits of the port address.
This means all VGA registers were aliased every 1024 ports!
e.g. 0x3b0 was also decoded as 0x7b0, 0xbb0 etc.
However, it seems, we never reserved the aliased ports, resulting in
silent conflicts we preallocated resources. We neither use much
external VGA nor many i/o ports these days, so nobody noticed.
To avoid this mess, a bridge control bit (VGA16) was introduced in
2003 to enable decoding of 16-bit port addresses. As older systems
seem rather safe and well tested, and newer systems should support
this bit, we'll use it if possible and only warn if not.
With old (AGP era) hardware one will likely encounter a warning like
this:
found VGA at PCI: 06:00.0
A bridge on the path doesn't support 16-bit VGA decoding!
This is not generally fatal, but makes unnoticed resource conflicts
more likely.
Change-Id: Id7a07f069dd54331df79f605c6bcda37882a602d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35516
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This codepath is never takes as it checks if the CPU is at least
ivybridge.
Change-Id: Id064385f0c8bb0b094714129df6d8ba36c87a307
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The assumption is made that an ACPI aware an OS does not rely on
firmware to initialize the display.
TESTED on a Lenovo Thinkpad X201 with Linux 5.2, display still works
after S3, more than 200ms in time saved (dropped from 411ms to 182ms
in total in one test).
Change-Id: I36219e6d04db561d4f2ddb6e962166c598d5bc4f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This change does the following:
- Move PCH init code from the common romstage to sb code, this allows
for easier reuse in bootblock
- Provide a common minimal LPC io decode setup, mainboards can
override this in the mainboard_lpc_init if required
- Set up LPC generic IO decode up in romstage based on devicetree
settings
- Remove the ramstage LPC generic IO decode from ramstage as this is
now done in romstage.c
- Get rid of unneeded setup of spi_read configuration in BIOS_CNTL as
this is already done in the bootblock.
Change-Id: I3f448ad1fdc445c4c1fedbc8497e1025af111412
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Move the mainboard_romstage_entry to a common location and provide
mainboard specific callbacks.
Change-Id: Ia827053617cead5d2cf8e9f06cb68c2cbb668ca9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This is based on the sandybridge settings.
The current lookup table comes from the x201 vendor lookup table.
Tested: USB mouse and webcam still work and current registers are the
same as before. USB IR are not but the code follows EDS instead of the
register replay.
Change-Id: Icea9673623a62e7039d5700100a2ee238478abd1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35762
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The values read back in those ranges are identical before and after
this change and the Lenovo Thinkpad X201 still boots fine.
Change-Id: I406510e0573ac97003da7d97181abdfbfd2a872f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35760
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The RCBA registers 0x3400-0x3500 are all handled elsewhere
in the code, so no need to have a 'replay' of those.
The remainder now consist of USB setup and undocumented bits
that should likely not be touched at all.
Change-Id: I69fc8a5e16f7cf0e1068d0d2ed678a6c2f6e70a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
RCBA_HPTC needs to be read back to properly work.
This fixes SeaBIOS endlessly waiting for input instead of booting the
default entry. Linux already fixes this itself.
Change-Id: I22b8b34924f2add2185ec46470c1559bf2fb6d58
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35757
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This does the following:
- implement a PCH disable function that will be called by the PCI
drivers as part of their chip_ops
- removes the iobp_x calls as those don't exist on ibexpeak
- complete the devicetree with to be disabled PCI devices for the
chip_ops to be called
- Clean up some code copied from bd82x6x
Change-Id: I78d25ffe9af482c77d397a9fdb4f0127e40baddc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This was simply copied from sandybridge/gma.c.
All these registers read back 0xffffffff or 0 or don't respond to
reads.
Change-Id: I094e7caa889a3175477aa78b91545ca804d423c8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35746
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On these CPUs the MCHBAR window is 16KiB large. This code was just
copied from SNB.
Change-Id: I263cfc678a2eb8eeee8ab9157c749359064a9be8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This properly sets up the chipset initialization registers, instead of
replaying an RCBA dump.
The information is taken from the EDS and from the thinkpad x201
vendor BIOS disassembly and from an HP UEFI.
TESTED on Thinkpad X201. Seems stable at booting, rebooting and resume
from S3.
Change-Id: I21c2beaf70da27dbe6a56e2612df2c257c05fc62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: I1a8675a4e613a8efc135b05cde36f166acaa7ed4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
The code is compiled on SKL/KBL, but the P2SB PCI IDs were missing.
Add them to make sure that the BAR0 doesn't change when running PCI
resource allocation.
Change-Id: I7cffbbc7d15dad14cccd122a081099b51dc1ce07
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The extra PCI bus RST# and 200ms delay there was workaround
for custom add-on hardware.
Change-Id: I38c4677cfb41d620498be8e0c257b517995bad5c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: Id78e594ae6490d39df76317f8fc3381fe681dd6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: I6ead2bc5e41a86c9aeef730f5664a30406414c8c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Minimize use of hard-coded value for acpi_table_header->revision to soft
code. Replace with macro defined in arch/acpi.h for FADT and with the
get_acpi_table_revision function for SSDT.
Change-Id: I99e59afc1a87203499d2da6dedaedfa643ca7eac
Signed-off-by: Sourabh Kashyap <Sourabhka@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35539
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Auto-discoverable PCI devices do not require field .enable_dev
of chip_operations to be set. They are matched with PCI drivers
by the use of PCI vendor and device ID fields.
The name given for the chip_operations struct must match the
pathname the way it is present in the devicetree.cb files. If
there was no match, util/sconfig would currently choose to
use the empty weak declaration it creates in static.c file.
Change-Id: I684a087a1f8ee4e1a5fd83450cd371fcfdbb6847
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
STACK_SIZE value needs to be changed from hex to decimal,
since -Wstack-usage doesn't recognize hexadecimal numbers anymore.
Change-Id: I73606d347194af5de5882a3387a4a5db17f9d94b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35593
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ONBOARD_MICRON_MEM and ONBOARD_SAMSUNG_MEM are available.
These are used to determine if Samsung or Micron onboard memory is
assembled. This can not detected run-time.
Choice is replaced by one config.
Only oldest HW revision contains Samsung module, so set
CONFIG_ONBOARD_SAMSUNG memory to default No.
BUG=N/A
TEST=Boot and verified on Facebook FBG-1701
Change-Id: Id65e92bd4b8d4fe3a6b87dec9bf77e3a62e1be96
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Before oprom is executed, no check is performed if rom passes verification.
Add call to verified_boot_should_run_oprom() to verify the oprom.
verified_boot_should_run_oprom() expects and rom address as input pointer.
*rom is added as input parameter to should_run_oprom() which must be parsed
to verified_boot_should_run_oprom()..
BUG=N/A
TEST=Created verified binary and verify logging on Facebook FBG1701
Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Some VR parameter values for KBL-U with GT3 graphics are different from
values for other CPUs in this series [1]. However, GT3 iGPU will never
be detected, since the igd_id variable is compared with the LPC device
PCI ID. The patch fixes this bug.
[1] page 109, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I33527d90550a1de78c9375d3d3b0e046787a559b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
According to the documentation[1], the Loadline in the unslased GT VR
domain should be 2 mOhms for KBL-U (2 Core, GT3 + OPC).
[1] page 109, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I433036e76d456a725ab27cf57c9bc2fe01a7ace1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35781
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds missing Intel HD/Iris iGPU PCI IDs for Kaby Lake processors and
updates the platform report for these devices.
These changes are in accordance with the documentation:
[*] page 10, Intel(R) Open Source HD Graphics and Intel Iris(TM) Plus
Graphics for the 2016 - 2017 Intel Core(TM) Processors, Celeron(TM)
Processors, and Pentium(TM) Processors based on the "Kaby Lake"
Platform. Programmer's Reference Manual. Volume 4: Configurations.
January 2017, Revision 1.0
Doc Ref # IHD-OS-KBL-Vol 4-1.17
[*] Linux kernel sources: include/drm/i915_pciids.h
Change-Id: I1cd1e4ab82f756141f8f13edf1c17f726166dffb
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
According to the DC Current Specifications [1], the current limit for
the graphical VR domain (Iccmax_gt) isn't same for different Kaby Lake S
CPUs. This value should depend on the iGPU model and processor TDP:
+---------------------+-----+------------+
| Segment | TDP | Icc_max GT |
+---------------------+-----+------------+
| Dual Core GT2/GT1 | 35W | |
| Dual Core GT2 | 51W | 48 A |
| Dual Core GT1 | 54W | |
+---------------------+-----+------------+
| Quad Core GT2 | 35W | 35 A |
+---------------------+-----+------------+
| Quad Core GT2 | 65W | 45 A |
| Quad Core GT2 K-SKU | 91W | |
+---------------------+-----+------------+
This patch adds the remaining Iccmax_gt current limit values from the
documentation [1].
[1] 7th Generation Intel(R) Processor Families for S Platforms and
Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1,
December 2018, Document Number: 335195-003
Change-Id: I19766e4f8fab6b48565b65ed4cf13efbc213e654
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
No support is available in mainboard.
Add support to mainboard:
- Add mb_log_list[]
- Add routine mb_crtm()
BUG=N/A
TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701
Change-Id: I5120ffb6af0b41520056e1773f63b7b2f34a2460
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
The vendorcode for verified boot is uploaded, but not used by a mainboard.
Add support to the mainboard for verified boot.
The items to be verifed are placed in board_verified_boot.c
BUG=N/A
TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 rev 0-2
Change-Id: I3ea0a95287977df0dea13e05acedd5406538a6ee
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33463
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create verified boot support, which includes verifiication of bootblock.
This feature use the vendorcode/eltan/security/lib.
cbfs_locator is used to init the verified boot support.
vendor_secure_prepare() and vendor_secure_locate() are used to preform the
required action in each stage.
The next lists will be used for verification:
* bootblock_verify_list
* postcar_verify_list
* romstage_verify_list
* ramstage_verify_list
BUG=N/A
TEST=Created binary and verify logging on Facebook FBG-1701
Change-Id: If6c1423b0b4a309cefb7fe7a29d5100ba289e0b4
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Create measured boot.
This feature uses the vendorcode/eltan/security/lib.
Measure boot can work with and without Verified boot enabled.
The function mb_measure() is starting point for the support. This
function will be called by the common Verified boot code.
BUG=N/A
TEST=Created binary and verify logging on Facebook FBG-1701
Change-Id: I7f880a17e240515dd42d57383b5ddddf576985b0
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add a SSDT on qemu and place BOOT0000 inside it to allow testing
the google firmware kernel module in qemu.
Tested on Qemu Q35.
Change-Id: Ibd1b2c2f4fc3db9ae8f338b0d53b2d00ea2c4190
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HIMANSHU SAHDEV <sahdev.himan@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fix regression with commit d53fd70 intel/smm/gen1: Use smm_subregion().
The bitmask on SMRR register parameter was inverted for
selected models.
Change-Id: Ia572ca3bdd4da371985691b5d249f998382fbe48
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Don't set a default bus type for the Chrome EC on x86. The platform
must select the bus, typically LPC or ESPI.
BUG=b:140055300
TEST=Build tested only
Change-Id: I736cb9e43292a1b228cd083ca81a8e5db383e878
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Previously all boards using eSPI for the Chrome EC just called it
LPC as the code for the chrome EC is the same between the two
busses.
I'm adding a new Kconfig symbol to specify eSPI, so switch the
boards that actually use eSPI to that symbol and add the LPC
symbol to all the others.
The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default
to enabled for x86 platforms, so one symbol or the other needs to be
specified for each platform.
BUG=b:140055300
TEST=Build tested only.
Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add new config option to validate the Intel firmware descriptor against
the fmap layout. This will prevent a firmware descriptor from being used
that could corrupt regions of the bootimage in certian circumstances.
BUG=chromium:992215
TEST=Build firmware image with mismached decriptor and fmp
Without VALIDATE_INTEL_DESCRIPTOR set firmware builds
With VALIDATE_INTEL_DESCRIPTOR set error is shown with mismached
regions
Change-Id: I9e8bb20485e96026cd594cf4e9d6b11b2bf20e1f
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
An original code had a wrong register address 0x27 for AHCI BAR.
The value was aligned incidentally by the code specific of
the pci_read_config32 function to the correct address 0x24.
All 0x24 values in sata.c were changed to the symbolic name
PCI_BASE_ADDRESS_5 and the code was optimized.
An equivalent code was tested on a real hardware.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Change-Id: I33509befe86ff6e333c559c87a0f45886d737df9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35737
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Connected 4K monitor is not configured at max resolution. The
framebuffer size is too small.
Increase the framebuffer size to 64MB. This is sufficient for max
configuration of 1 HDMI monitor combined with internal LCD panel.
BUG=N/A
TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701
Change-Id: I25d2cd696830fc5bda84ea2b87538f526373998e
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add defines to have some more readable code for devcietree.cb.
BUG=N/A
TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701
Change-Id: Ifc1a7657a528d1fc570dd16df66b078e37e014cb
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
PCB version is determined using inb() in actual code.
Create function mainboard_read_pcb_version to read pcb version.
BUG=N/A
TEST=Boot and verified on Facebook FBG-1701
Change-Id: I7c16627f468d84ca4ad2aab8bf9fb555f50dc23c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
These were unused and somewhat cryptic, assumed purpose was to store
pre-CBMEM timestamps in various PCI config space locations.
Change-Id: I074294446501d49a9bd3c823a2a794c33f443168
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: Ice1062d10b793dcbeb5b2ce9e2788fd3b6b6250b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When creating the IRQ routing, referenced device and
function number are always of the same PCI device.
Change-Id: Ifc4795245187f8d70650242a56e6ce771ef2167a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35735
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The previously provided device path made no difference, all
integrated PCI devices point back to the same chip_info
structure.
Change reduces the exposure of various SA_DEVFN_xx and
PCH_DEVFN_xx from (ugly) soc/pci_devs.h.
Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Disable memory channel by HW strap pin. Using for factory
debug.
BUG=b:139773082
BRANCH=N/A
TEST=Rework HW strap pin and check /proc/mem_info
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ic5f53f0ba3bd432fbcb7513d2a8aa49d42f7a23e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35241
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Two fields of struct sdram_params are renamed for future CL of DRAM full
calibration. Field 'impedance' is also removed.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TESTED on Asus P5QC.
Change-Id: I20b87f3dcb898656ad31478820dd5153e4053cb2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30012
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the the FSP Parameter PchHdaVcType a devicetree setting and make
use of it in the devicetrees of all boards that currently set it.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Because vcore is the power of ddrphy in the soc, DRAM DVFS needs to be
calibrated with different vcore voltages to get correct parameters.
A new API is added to allow changing vcore voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vcore voltage with multimeter
Change-Id: Ic43d5efe7e597121775dc853a3e2a08ebc59657d
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33391
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make intel_ht_sibling() available on all platforms.
Will be used in MP init to only write "Core" MSRs from one thread
on HyperThreading enabled platforms, to prevent race conditions and
resulting #GP if MSRs are written twice or are already locked.
Change-Id: I5d000b34ba4c6536dc866fbaf106b78e905e3e35
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
A missing definition of gameport base (PNP io 0x60) will cause
an automatic address assignment during PCI/PNP enumeration, which
won't obey limit 0x7ff. This will cause the enumeration to fail
as other devices already have the values enabled.
The symptoms are: not working USB, PS/2, garbled UART console,
not working PCIe GPUs and crashes. Probably because of wrongly
assigned IO ports.
Example of log (shortened):
Done reading resources.
Setting resources...
!! Resource didn't fit !!
aligned base 1000 size 1000 limit 2e7
1fff needs to be <= 2e7 (limit)
PCI: 00:1c.0 1c * [0x0 - 0xfff] io
!! Resource didn't fit !!
aligned base 1000 size 1000 limit 2e7
1fff needs to be <= 2e7 (limit)
PCI: 00:1c.1 1c * [0x1000 - 0x1fff] io
!! Resource didn't fit !!
aligned base 1000 size 1000 limit 2e7
1fff needs to be <= 2e7 (limit)
PCI: 00:1c.2 1c * [0x2000 - 0x2fff] io
!! Resource didn't fit !!
aligned base 400 size 10 limit 2e7
40f needs to be <= 2e7 (limit)
PCI: 00:1f.2 20 * [0x3080 - 0x308f] io
!! Resource didn't fit !!
...
ERROR: PCI: 00:02.0 14 io size: 0x0000000008 not assigned
...
ERROR: PCI: 00:1f.2 10 io size: 0x0000000008 not assigned
ERROR: PCI: 00:1f.2 14 io size: 0x0000000004 not assigned
ERROR: PCI: 00:1f.2 18 io size: 0x0000000008 not assigned
ERROR: PCI: 00:1f.2 1c io size: 0x0000000004 not assigned
ERROR: PCI: 00:1f.2 20 io size: 0x0000000010 not assigned
...
PCI: 00:1b.0 subsystem <- 8086/27d8
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0003
PCI: 00:1c.0 subsystem <- 8086/27d0
PCI: 00:1c.0 cmd <- 107
PCI: 00:1c.1 brids70c01mcu0PeC: 0
dV0i8s0immicrocode: upd10a00000y0025 x666600CPU physiaB 0 0 e k
MTRR cheaeu60zeAttemfWaiting for 1st Sot AP: slot 1 apic_L0ecl0zsax a
aInitiNntt kac:oIG0 Ua dUrSGSGL Ct0C07fintel_vga_int15_h
VGA Option ROM wa7..Azalia0Azalia: codkAbCiPCI: 00:1c.0 init finished
We can see the ports probably started to collide after the activation
of 00:1c.0 device. A debug run with compiled SPEW shows the problem
with enumeration:
PCI: 00:1f.1 18 * [0x50b8 - 0x50bf] io
PCI: 00:1f.2 10 * [0x50c0 - 0x50c7] io
PCI: 00:1f.2 18 * [0x50c8 - 0x50cf] io
PCI: 00:1f.1 14 * [0x50d0 - 0x50d3] io
PCI: 00:1f.1 1c * [0x50d4 - 0x50d7] io
PCI: 00:1f.2 14 * [0x50d8 - 0x50db] io
PCI: 00:1f.2 1c * [0x50dc - 0x50df] io
PNP: 002e.7 60 * [0x50e0 - 0x50e0] io <-- gameport base
DOMAIN: 0000 io: base: 50e1 size: 40e1 align: 12 gran: 0 limit: 7ff done
Notice a weird base for DOMAIN, along with the limit.
Adding a definition of gameport (0x220) as a workaround fixes
the problems.
The gameport should be still disabled thanks to disable bits
(W83627THF datasheet is little bit chaotic). I didn't find any info
if the gameport is available on some pads of the motherboard.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Change-Id: Ie8e42552ac5e638e91e5c290655edcce1f64e408
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is a PCI standard register, no need to alias its
definitions under different names.
Change-Id: Iea6b198dd70fe1e49b5dc0824dba62628dedc69a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implementation of ich_pci_dev_enable_resources() used to have
a custom implementation to program PCI subsystem IDs for the
(legacy) PCI bus bridge.
With the local implementation removed, we no longer need the
custom .enable_resources callback.
Change-Id: I6f73fd0e4d5a1829d1555455c9a143f1d18a6116
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Petr Cvek <petrcvekcz@gmail.com>
The simple PCI config accessors are always available
under names pci_s_[read|write]_configX.
We have some use for PCI bridge configurations and
resets in romstages, so expose them.
Change-Id: Ia97a4e1f1b4c80b3dae800d80615bdc118414ed3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Many supported SST flashes use the AAI OP (0xad) to write.
TESTED on Thinkpad X60 with SST25VF016B, flashrom can use AAI_WRITE op
with locked down SPIOPS.
Change-Id: Ica72eda04a8d9f4e563987871b1640565c6e7e12
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This also reworks the interface to override OPs from the devicetree to
match the interface in sb/intel/common/spi.
Change-Id: I534e989279d771ec4c0249af325bc3b30a661145
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
While the list of prerequisities is not created with romcc,
we need to simulate it since different set of header files
will is used.
Change-Id: Ib799c872b5280e2035126f9660e04e51acc4b1a8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35601
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allow to set a lower temperature limit, as the currently hard-coded
25C may be to low for a given temperature sensor. Also enable smoo-
thing, currently hard-coded to the maximum interval of 35s, and set
the hysteresis value.
Change-Id: I5fde1cf909e8fbbaf8a345790b00c58a73c19ef8
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
We accidentally converted an `int` return value to an `unsigned`,
making it impossible to check for errors with `< 0`. Fix that by
using an `int` variable.
Change-Id: I5433c27e334bc177913e138df83118b128c674b7
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The existing Kconfig code made SMBIOS_PROVIDED_BY_MOBO depend
on VENDOR_LENOVO. Thus, it couldn't be selected by boards from
other vendors. So we add another Kconfig that selects it
here.
NB. It's still unclear how the two drivers in this directory
are related (at24rf08c and lenovo_serial). From the code, it
doesn't look like the latter belongs here.
Change-Id: Iaa5c5a584f2a5e2426352ec6aa681f99a55efa49
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
i2c_dev_read_at16() sends a 16-bit offset to the I2C chip (for larger
EEPROM parts), then reads bytes up to a given length into a buffer.
Change-Id: I7516f3e5d9aca362c2b340aa5627d91510c09412
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
According to the documentation [1], SKL-H Halo GT4E (Iris Pro Graphics
P580) PCI ID should be 0x193B.
[1] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM)
Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference
Manual. Volume 4: Configurations. May 2016, Revision 1.0
Doc Ref # IHD-OS-SKL-Vol 4-05.16
Change-Id: Id62fe3ec26779d51b748efd271db565ade1e3ee0
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The new macro name contains the number of cores:
PCI_DEVICE_ID_INTEL_SKL_ID_H_4 - 4 core
PCI_DEVICE_ID_INTEL_SKL_ID_H_2 - 2 core
Change-Id: I190181b213d55865aa577ae5baff179fef95afde
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35302
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support mt8183 power saving during suspend to RAM, this patch loads
SPM firmware to support SPM suspend. SPM needs its own firmware to do
these power saving in the right timing under correct conditions. After
linux PM suspends, SPM is able to turn off power for the last CPU and do
more power saving for the SoC such as DRAM self-refresh mode and turning
off 26M crystal.
BUG=none
BRANCH=none
TEST=suspend/resume passes for LPDDR4 3200
Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Make sure to match devices on the root bus only. This fixes an issue
where the SoC returned "MCHC" as ACPI name for devices behind bridge
devices, as the DEVFN matched.
Fixes observed "ACPI exception: AE_NOT_FOUND" in dmesg, as the ACPI
path no longer contains invalid names.
Tested on Supermicro X11SSH-TF.
Change-Id: I6eca37a1792287502a46a90144f2f0d8e12ae5d4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This removes the "ifdef ACPI" which is not needed here as we currently
don't include gpio.h in any asl file.
Change-Id: I803bbee5933eda9423a9bc9fcaea9e905e3ac78e
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35543
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes the warning that power_on_after_fail could not be found,
adds a default config and adds the parameter hyper_threading.
Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35526
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The CONFIG_GBB_HWID can be generated automatically now so we can remove
the test-only HWIDs set in board config files.
BUG=b:140067412
TEST=Built few boards (kukui, cheza, octopus) and checked HWID:
futility gbb -g coreboot.rom
Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The HWID in vboot GBB is an identifier for machine model. On Chrome OS,
that should be provisioned in manufacturing process (by collecting real
hardware information), and will be checked in system startup.
For bring up developers, they usually prefer to generate a test-only
string for HWID. However that format was not well documented and cause
problems. Further more, most Chromebooks are using HWID v3+ today while
the test-only HWID is usually v2. Non-Chrome OS developers may also
prefer their own format.
To simplify development process, the GBB_CONFIG now defaults to empty
string, and will be replaced by a board-specific test-only v2 HWID
automatically. Developers can still override that in mainboard Kconfig
if they prefer v3 or other arbitrary format.
BUG=b:140067412
TEST=Built 'kukui' successfully. Removed kukui GBB config and built
again, still seeing correct test HWID.
Change-Id: I0cda17a374641589291ec8dfb1d66c553f7cbf35
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The simple PCI config accessors are always available
under names pci_s_[read|write]_configX.
Change-Id: Ic1b67695b7f72e4f1fa29e2d56698276b15024e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The typical do { } while (0) did not work, so
provide empty stub function instead.
Change-Id: Ieb0c33b082b4c4453d29d917f46561c0e672d09a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable VBOOT in Kconfig and provide a flashmap that includes all the
needed sections for VBOOT support.
Change-Id: Iee12a5d1781c869b20bc14a52ecbf23474caa3fd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
If VBOOT is used on a mainboard based on fsp_broadwell_de then VBOOT
needs to be able to write to its NV data which may be stored on the SPI
flash. Enable write access to the SPI flash on SoC level. If the
mainboard does not use VBOOT the linker will drop the extra code. The
benefit is that this code is at least compiled and therefore build
tested with fsp_broadwell_de.
Change-Id: I90a2d30f5749c75df2b286dce6779f10dde62632
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Internal pull up need to be enabled for GPD3 as power button pin for
PCH according cometlake pch EDS vol1 section 17-1. Without that pin will
stay floating and hook up XDP can cause system shutdown as power buttone
event will trigger.
BUG=N/A
TEST=Hook up XDP on drallion platform, able to boot up into OS and stay
at power up state.
Change-Id: Idd1befeb14a251b7c0542ca1f99049d07b28fb98
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Source files including this may have locally defined
__SIMPLE_DEVICE__ so this cannot be placed in <rules.h>.
Change-Id: I2336111b871203f1628c3c47027d4052c37899dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35653
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Source files including this may have locally defined
__SIMPLE_DEVICE__ so this cannot be placed in <rules.h>.
Change-Id: If700dd10fd5e082568cd6866bfd802fc2e021806
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35652
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is safe to assume this to be copy-paste from eg. i945
where registers of said PCI device were read.
Change-Id: I387b7fd6caf317543a6438f973d9e1d96e418de3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35668
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The filename chip.h has a special purpose with the generation
of static devicetree, where the configuration structure name matches
the path to the chip.h file. For example, soc/intel/skylake/chip.h
defines struct soc_intel_skylake_config.
The renamed file did not follow this convention and the structure it
defines would conflict with one defined soc/intel/common/chip.h if such
is ever added.
Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We need the stub header file. If PCI was implemented, assume
generic MMIO mapped configuration space would work here.
Change-Id: Ia731e5c5a6725fe22ab8b0398cafa1127ed90891
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Michael Niewöhner